hw/pl080.c

   1 /*
   2  * Arm PrimeCell PL080/PL081 DMA controller
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11
  12 #define PL080_MAX_CHANNELS 8
  13 #define PL080_CONF_E    0x1
  14 #define PL080_CONF_M1   0x2
  15 #define PL080_CONF_M2   0x4
  16
  17 #define PL080_CCONF_H   0x40000
  18 #define PL080_CCONF_A   0x20000
  19 #define PL080_CCONF_L   0x10000
  20 #define PL080_CCONF_ITC 0x08000
  21 #define PL080_CCONF_IE  0x04000
  22 #define PL080_CCONF_E   0x00001
  23
  24 #define PL080_CCTRL_I   0x80000000
  25 #define PL080_CCTRL_DI  0x08000000
  26 #define PL080_CCTRL_SI  0x04000000
  27 #define PL080_CCTRL_D   0x02000000
  28 #define PL080_CCTRL_S   0x01000000
  29
  30 typedef struct {
  31     uint32_t src;
  32     uint32_t dest;
  33     uint32_t lli;
  34     uint32_t ctrl;
  35     uint32_t conf;
  36 } pl080_channel;
  37
  38 typedef struct {
  39     SysBusDevice busdev;
  40     uint8_t tc_int;
  41     uint8_t tc_mask;
  42     uint8_t err_int;
  43     uint8_t err_mask;
  44     uint32_t conf;
  45     uint32_t sync;
  46     uint32_t req_single;
  47     uint32_t req_burst;
  48     pl080_channel chan[PL080_MAX_CHANNELS];
  49     int nchannels;
  50     /* Flag to avoid recursive DMA invocations.  */
  51     int running;
  52     qemu_irq irq;
  53 } pl080_state;
  54
  55 static const VMStateDescription vmstate_pl080_channel = {
  56     .name = "pl080_channel",
  57     .version_id = 1,
  58     .minimum_version_id = 1,
  59     .fields = (VMStateField[]) {
  60         VMSTATE_UINT32(src, pl080_channel),
  61         VMSTATE_UINT32(dest, pl080_channel),
  62         VMSTATE_UINT32(lli, pl080_channel),
  63         VMSTATE_UINT32(ctrl, pl080_channel),
  64         VMSTATE_UINT32(conf, pl080_channel),
  65         VMSTATE_END_OF_LIST()
  66     }
  67 };
  68
  69 static const VMStateDescription vmstate_pl080 = {
  70     .name = "pl080",
  71     .version_id = 1,
  72     .minimum_version_id = 1,
  73     .fields = (VMStateField[]) {
  74         VMSTATE_UINT8(tc_int, pl080_state),
  75         VMSTATE_UINT8(tc_mask, pl080_state),
  76         VMSTATE_UINT8(err_int, pl080_state),
  77         VMSTATE_UINT8(err_mask, pl080_state),
  78         VMSTATE_UINT32(conf, pl080_state),
  79         VMSTATE_UINT32(sync, pl080_state),
  80         VMSTATE_UINT32(req_single, pl080_state),
  81         VMSTATE_UINT32(req_burst, pl080_state),
  82         VMSTATE_UINT8(tc_int, pl080_state),
  83         VMSTATE_UINT8(tc_int, pl080_state),
  84         VMSTATE_UINT8(tc_int, pl080_state),
  85         VMSTATE_STRUCT_ARRAY(chan, pl080_state, PL080_MAX_CHANNELS,
  86                              1, vmstate_pl080_channel, pl080_channel),
  87         VMSTATE_INT32(running, pl080_state),
  88         VMSTATE_END_OF_LIST()
  89     }
  90 };
  91
  92 static const unsigned char pl080_id[] =
  93 { 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  94
  95 static const unsigned char pl081_id[] =
  96 { 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
  97
  98 static void pl080_update(pl080_state *s)
  99 {
 100     if ((s->tc_int & s->tc_mask)
 101             || (s->err_int & s->err_mask))
 102         qemu_irq_raise(s->irq);
 103     else
 104         qemu_irq_lower(s->irq);
 105 }
 106
 107 static void pl080_run(pl080_state *s)
 108 {
 109     int c;
 110     int flow;
 111     pl080_channel *ch;
 112     int swidth;
 113     int dwidth;
 114     int xsize;
 115     int n;
 116     int src_id;
 117     int dest_id;
 118     int size;
 119     uint8_t buff[4];
 120     uint32_t req;
 121
 122     s->tc_mask = 0;
 123     for (c = 0; c < s->nchannels; c++) {
 124         if (s->chan[c].conf & PL080_CCONF_ITC)
 125             s->tc_mask |= 1 << c;
 126         if (s->chan[c].conf & PL080_CCONF_IE)
 127             s->err_mask |= 1 << c;
 128     }
 129
 130     if ((s->conf & PL080_CONF_E) == 0)
 131         return;
 132
 133 hw_error("DMA active\n");
 134     /* If we are already in the middle of a DMA operation then indicate that
 135        there may be new DMA requests and return immediately.  */
 136     if (s->running) {
 137         s->running++;
 138         return;
 139     }
 140     s->running = 1;
 141     while (s->running) {
 142         for (c = 0; c < s->nchannels; c++) {
 143             ch = &s->chan[c];
 144 again:
 145             /* Test if thiws channel has any pending DMA requests.  */
 146             if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))
 147                     != PL080_CCONF_E)
 148                 continue;
 149             flow = (ch->conf >> 11) & 7;
 150             if (flow >= 4) {
 151                 hw_error(
 152                     "pl080_run: Peripheral flow control not implemented\n");
 153             }
 154             src_id = (ch->conf >> 1) & 0x1f;
 155             dest_id = (ch->conf >> 6) & 0x1f;
 156             size = ch->ctrl & 0xfff;
 157             req = s->req_single | s->req_burst;
 158             switch (flow) {
 159             case 0:
 160                 break;
 161             case 1:
 162                 if ((req & (1u << dest_id)) == 0)
 163                     size = 0;
 164                 break;
 165             case 2:
 166                 if ((req & (1u << src_id)) == 0)
 167                     size = 0;
 168                 break;
 169             case 3:
 170                 if ((req & (1u << src_id)) == 0
 171                         || (req & (1u << dest_id)) == 0)
 172                     size = 0;
 173                 break;
 174             }
 175             if (!size)
 176                 continue;
 177
 178             /* Transfer one element.  */
 179             /* ??? Should transfer multiple elements for a burst request.  */
 180             /* ??? Unclear what the proper behavior is when source and
 181                destination widths are different.  */
 182             swidth = 1 << ((ch->ctrl >> 18) & 7);
 183             dwidth = 1 << ((ch->ctrl >> 21) & 7);
 184             for (n = 0; n < dwidth; n+= swidth) {
 185                 cpu_physical_memory_read(ch->src, buff + n, swidth);
 186                 if (ch->ctrl & PL080_CCTRL_SI)
 187                     ch->src += swidth;
 188             }
 189             xsize = (dwidth < swidth) ? swidth : dwidth;
 190             /* ??? This may pad the value incorrectly for dwidth < 32.  */
 191             for (n = 0; n < xsize; n += dwidth) {
 192                 cpu_physical_memory_write(ch->dest + n, buff + n, dwidth);
 193                 if (ch->ctrl & PL080_CCTRL_DI)
 194                     ch->dest += swidth;
 195             }
 196
 197             size--;
 198             ch->ctrl = (ch->ctrl & 0xfffff000) | size;
 199             if (size == 0) {
 200                 /* Transfer complete.  */
 201                 if (ch->lli) {
 202                     ch->src = ldl_le_phys(ch->lli);
 203                     ch->dest = ldl_le_phys(ch->lli + 4);
 204                     ch->ctrl = ldl_le_phys(ch->lli + 12);
 205                     ch->lli = ldl_le_phys(ch->lli + 8);
 206                 } else {
 207                     ch->conf &= ~PL080_CCONF_E;
 208                 }
 209                 if (ch->ctrl & PL080_CCTRL_I) {
 210                     s->tc_int |= 1 << c;
 211                 }
 212             }
 213             goto again;
 214         }
 215         if (--s->running)
 216             s->running = 1;
 217     }
 218 }
 219
 220 static uint32_t pl080_read(void *opaque, target_phys_addr_t offset)
 221 {
 222     pl080_state *s = (pl080_state *)opaque;
 223     uint32_t i;
 224     uint32_t mask;
 225
 226     if (offset >= 0xfe0 && offset < 0x1000) {
 227         if (s->nchannels == 8) {
 228             return pl080_id[(offset - 0xfe0) >> 2];
 229         } else {
 230             return pl081_id[(offset - 0xfe0) >> 2];
 231         }
 232     }
 233     if (offset >= 0x100 && offset < 0x200) {
 234         i = (offset & 0xe0) >> 5;
 235         if (i >= s->nchannels)
 236             goto bad_offset;
 237         switch (offset >> 2) {
 238         case 0: /* SrcAddr */
 239             return s->chan[i].src;
 240         case 1: /* DestAddr */
 241             return s->chan[i].dest;
 242         case 2: /* LLI */
 243             return s->chan[i].lli;
 244         case 3: /* Control */
 245             return s->chan[i].ctrl;
 246         case 4: /* Configuration */
 247             return s->chan[i].conf;
 248         default:
 249             goto bad_offset;
 250         }
 251     }
 252     switch (offset >> 2) {
 253     case 0: /* IntStatus */
 254         return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);
 255     case 1: /* IntTCStatus */
 256         return (s->tc_int & s->tc_mask);
 257     case 3: /* IntErrorStatus */
 258         return (s->err_int & s->err_mask);
 259     case 5: /* RawIntTCStatus */
 260         return s->tc_int;
 261     case 6: /* RawIntErrorStatus */
 262         return s->err_int;
 263     case 7: /* EnbldChns */
 264         mask = 0;
 265         for (i = 0; i < s->nchannels; i++) {
 266             if (s->chan[i].conf & PL080_CCONF_E)
 267                 mask |= 1 << i;
 268         }
 269         return mask;
 270     case 8: /* SoftBReq */
 271     case 9: /* SoftSReq */
 272     case 10: /* SoftLBReq */
 273     case 11: /* SoftLSReq */
 274         /* ??? Implement these. */
 275         return 0;
 276     case 12: /* Configuration */
 277         return s->conf;
 278     case 13: /* Sync */
 279         return s->sync;
 280     default:
 281     bad_offset:
 282         hw_error("pl080_read: Bad offset %x\n", (int)offset);
 283         return 0;
 284     }
 285 }
 286
 287 static void pl080_write(void *opaque, target_phys_addr_t offset,
 288                           uint32_t value)
 289 {
 290     pl080_state *s = (pl080_state *)opaque;
 291     int i;
 292
 293     if (offset >= 0x100 && offset < 0x200) {
 294         i = (offset & 0xe0) >> 5;
 295         if (i >= s->nchannels)
 296             goto bad_offset;
 297         switch (offset >> 2) {
 298         case 0: /* SrcAddr */
 299             s->chan[i].src = value;
 300             break;
 301         case 1: /* DestAddr */
 302             s->chan[i].dest = value;
 303             break;
 304         case 2: /* LLI */
 305             s->chan[i].lli = value;
 306             break;
 307         case 3: /* Control */
 308             s->chan[i].ctrl = value;
 309             break;
 310         case 4: /* Configuration */
 311             s->chan[i].conf = value;
 312             pl080_run(s);
 313             break;
 314         }
 315     }
 316     switch (offset >> 2) {
 317     case 2: /* IntTCClear */
 318         s->tc_int &= ~value;
 319         break;
 320     case 4: /* IntErrorClear */
 321         s->err_int &= ~value;
 322         break;
 323     case 8: /* SoftBReq */
 324     case 9: /* SoftSReq */
 325     case 10: /* SoftLBReq */
 326     case 11: /* SoftLSReq */
 327         /* ??? Implement these.  */
 328         hw_error("pl080_write: Soft DMA not implemented\n");
 329         break;
 330     case 12: /* Configuration */
 331         s->conf = value;
 332         if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) {
 333             hw_error("pl080_write: Big-endian DMA not implemented\n");
 334         }
 335         pl080_run(s);
 336         break;
 337     case 13: /* Sync */
 338         s->sync = value;
 339         break;
 340     default:
 341     bad_offset:
 342         hw_error("pl080_write: Bad offset %x\n", (int)offset);
 343     }
 344     pl080_update(s);
 345 }
 346
 347 static CPUReadMemoryFunc * const pl080_readfn[] = {
 348    pl080_read,
 349    pl080_read,
 350    pl080_read
 351 };
 352
 353 static CPUWriteMemoryFunc * const pl080_writefn[] = {
 354    pl080_write,
 355    pl080_write,
 356    pl080_write
 357 };
 358
 359 static int pl08x_init(SysBusDevice *dev, int nchannels)
 360 {
 361     int iomemtype;
 362     pl080_state *s = FROM_SYSBUS(pl080_state, dev);
 363
 364     iomemtype = cpu_register_io_memory(pl080_readfn,
 365                                        pl080_writefn, s,
 366                                        DEVICE_NATIVE_ENDIAN);
 367     sysbus_init_mmio(dev, 0x1000, iomemtype);
 368     sysbus_init_irq(dev, &s->irq);
 369     s->nchannels = nchannels;
 370     return 0;
 371 }
 372
 373 static int pl080_init(SysBusDevice *dev)
 374 {
 375     return pl08x_init(dev, 8);
 376 }
 377
 378 static int pl081_init(SysBusDevice *dev)
 379 {
 380     return pl08x_init(dev, 2);
 381 }
 382
 383 static SysBusDeviceInfo pl080_info = {
 384     .init = pl080_init,
 385     .qdev.name = "pl080",
 386     .qdev.size = sizeof(pl080_state),
 387     .qdev.vmsd = &vmstate_pl080,
 388     .qdev.no_user = 1,
 389 };
 390
 391 static SysBusDeviceInfo pl081_info = {
 392     .init = pl081_init,
 393     .qdev.name = "pl081",
 394     .qdev.size = sizeof(pl080_state),
 395     .qdev.vmsd = &vmstate_pl080,
 396     .qdev.no_user = 1,
 397 };
 398
 399 /* The PL080 and PL081 are the same except for the number of channels
 400    they implement (8 and 2 respectively).  */
 401 static void pl080_register_devices(void)
 402 {
 403     sysbus_register_withprop(&pl080_info);
 404     sysbus_register_withprop(&pl081_info);
 405 }
 406
 407 device_init(pl080_register_devices)