8 #include "qemu-common.h"
9 #include "host-utils.h"
10 #if !defined(CONFIG_USER_ONLY)
11 #include "hw/loader.h"
14 static uint32_t cortexa9_cp15_c0_c1
[8] =
15 { 0x1031, 0x11, 0x000, 0, 0x00100103, 0x20000000, 0x01230000, 0x00002111 };
17 static uint32_t cortexa9_cp15_c0_c2
[8] =
18 { 0x00101111, 0x13112111, 0x21232041, 0x11112131, 0x00111142, 0, 0, 0 };
20 static uint32_t cortexa8_cp15_c0_c1
[8] =
21 { 0x1031, 0x11, 0x400, 0, 0x31100003, 0x20000000, 0x01202000, 0x11 };
23 static uint32_t cortexa8_cp15_c0_c2
[8] =
24 { 0x00101111, 0x12112111, 0x21232031, 0x11112131, 0x00111142, 0, 0, 0 };
26 static uint32_t mpcore_cp15_c0_c1
[8] =
27 { 0x111, 0x1, 0, 0x2, 0x01100103, 0x10020302, 0x01222000, 0 };
29 static uint32_t mpcore_cp15_c0_c2
[8] =
30 { 0x00100011, 0x12002111, 0x11221011, 0x01102131, 0x141, 0, 0, 0 };
32 static uint32_t arm1136_cp15_c0_c1
[8] =
33 { 0x111, 0x1, 0x2, 0x3, 0x01130003, 0x10030302, 0x01222110, 0 };
35 static uint32_t arm1136_cp15_c0_c2
[8] =
36 { 0x00140011, 0x12002111, 0x11231111, 0x01102131, 0x141, 0, 0, 0 };
38 static uint32_t cpu_arm_find_by_name(const char *name
);
40 static inline void set_feature(CPUARMState
*env
, int feature
)
42 env
->features
|= 1u << feature
;
45 static void cpu_reset_model_id(CPUARMState
*env
, uint32_t id
)
47 env
->cp15
.c0_cpuid
= id
;
49 case ARM_CPUID_ARM926
:
50 set_feature(env
, ARM_FEATURE_V4T
);
51 set_feature(env
, ARM_FEATURE_V5
);
52 set_feature(env
, ARM_FEATURE_VFP
);
53 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x41011090;
54 env
->cp15
.c0_cachetype
= 0x1dd20d2;
55 env
->cp15
.c1_sys
= 0x00090078;
57 case ARM_CPUID_ARM946
:
58 set_feature(env
, ARM_FEATURE_V4T
);
59 set_feature(env
, ARM_FEATURE_V5
);
60 set_feature(env
, ARM_FEATURE_MPU
);
61 env
->cp15
.c0_cachetype
= 0x0f004006;
62 env
->cp15
.c1_sys
= 0x00000078;
64 case ARM_CPUID_ARM1026
:
65 set_feature(env
, ARM_FEATURE_V4T
);
66 set_feature(env
, ARM_FEATURE_V5
);
67 set_feature(env
, ARM_FEATURE_VFP
);
68 set_feature(env
, ARM_FEATURE_AUXCR
);
69 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x410110a0;
70 env
->cp15
.c0_cachetype
= 0x1dd20d2;
71 env
->cp15
.c1_sys
= 0x00090078;
73 case ARM_CPUID_ARM1136_R2
:
74 case ARM_CPUID_ARM1136
:
75 set_feature(env
, ARM_FEATURE_V4T
);
76 set_feature(env
, ARM_FEATURE_V5
);
77 set_feature(env
, ARM_FEATURE_V6
);
78 set_feature(env
, ARM_FEATURE_VFP
);
79 set_feature(env
, ARM_FEATURE_AUXCR
);
80 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x410120b4;
81 env
->vfp
.xregs
[ARM_VFP_MVFR0
] = 0x11111111;
82 env
->vfp
.xregs
[ARM_VFP_MVFR1
] = 0x00000000;
83 memcpy(env
->cp15
.c0_c1
, arm1136_cp15_c0_c1
, 8 * sizeof(uint32_t));
84 memcpy(env
->cp15
.c0_c2
, arm1136_cp15_c0_c2
, 8 * sizeof(uint32_t));
85 env
->cp15
.c0_cachetype
= 0x1dd20d2;
86 env
->cp15
.c1_sys
= 0x00050078;
88 case ARM_CPUID_ARM11MPCORE
:
89 set_feature(env
, ARM_FEATURE_V4T
);
90 set_feature(env
, ARM_FEATURE_V5
);
91 set_feature(env
, ARM_FEATURE_V6
);
92 set_feature(env
, ARM_FEATURE_V6K
);
93 set_feature(env
, ARM_FEATURE_VFP
);
94 set_feature(env
, ARM_FEATURE_AUXCR
);
95 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x410120b4;
96 env
->vfp
.xregs
[ARM_VFP_MVFR0
] = 0x11111111;
97 env
->vfp
.xregs
[ARM_VFP_MVFR1
] = 0x00000000;
98 memcpy(env
->cp15
.c0_c1
, mpcore_cp15_c0_c1
, 8 * sizeof(uint32_t));
99 memcpy(env
->cp15
.c0_c2
, mpcore_cp15_c0_c2
, 8 * sizeof(uint32_t));
100 env
->cp15
.c0_cachetype
= 0x1dd20d2;
102 case ARM_CPUID_CORTEXA8
:
103 set_feature(env
, ARM_FEATURE_V4T
);
104 set_feature(env
, ARM_FEATURE_V5
);
105 set_feature(env
, ARM_FEATURE_V6
);
106 set_feature(env
, ARM_FEATURE_V6K
);
107 set_feature(env
, ARM_FEATURE_V7
);
108 set_feature(env
, ARM_FEATURE_AUXCR
);
109 set_feature(env
, ARM_FEATURE_THUMB2
);
110 set_feature(env
, ARM_FEATURE_VFP
);
111 set_feature(env
, ARM_FEATURE_VFP3
);
112 set_feature(env
, ARM_FEATURE_NEON
);
113 set_feature(env
, ARM_FEATURE_THUMB2EE
);
114 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x410330c0;
115 env
->vfp
.xregs
[ARM_VFP_MVFR0
] = 0x11110222;
116 env
->vfp
.xregs
[ARM_VFP_MVFR1
] = 0x00011100;
117 memcpy(env
->cp15
.c0_c1
, cortexa8_cp15_c0_c1
, 8 * sizeof(uint32_t));
118 memcpy(env
->cp15
.c0_c2
, cortexa8_cp15_c0_c2
, 8 * sizeof(uint32_t));
119 env
->cp15
.c0_cachetype
= 0x82048004;
120 env
->cp15
.c0_clid
= (1 << 27) | (2 << 24) | 3;
121 env
->cp15
.c0_ccsid
[0] = 0xe007e01a; /* 16k L1 dcache. */
122 env
->cp15
.c0_ccsid
[1] = 0x2007e01a; /* 16k L1 icache. */
123 env
->cp15
.c0_ccsid
[2] = 0xf0000000; /* No L2 icache. */
124 env
->cp15
.c1_sys
= 0x00c50078;
126 case ARM_CPUID_CORTEXA9
:
127 set_feature(env
, ARM_FEATURE_V4T
);
128 set_feature(env
, ARM_FEATURE_V5
);
129 set_feature(env
, ARM_FEATURE_V6
);
130 set_feature(env
, ARM_FEATURE_V6K
);
131 set_feature(env
, ARM_FEATURE_V7
);
132 set_feature(env
, ARM_FEATURE_AUXCR
);
133 set_feature(env
, ARM_FEATURE_THUMB2
);
134 set_feature(env
, ARM_FEATURE_VFP
);
135 set_feature(env
, ARM_FEATURE_VFP3
);
136 set_feature(env
, ARM_FEATURE_VFP_FP16
);
137 set_feature(env
, ARM_FEATURE_NEON
);
138 set_feature(env
, ARM_FEATURE_THUMB2EE
);
139 /* Note that A9 supports the MP extensions even for
140 * A9UP and single-core A9MP (which are both different
141 * and valid configurations; we don't model A9UP).
143 set_feature(env
, ARM_FEATURE_V7MP
);
144 env
->vfp
.xregs
[ARM_VFP_FPSID
] = 0x41034000; /* Guess */
145 env
->vfp
.xregs
[ARM_VFP_MVFR0
] = 0x11110222;
146 env
->vfp
.xregs
[ARM_VFP_MVFR1
] = 0x01111111;
147 memcpy(env
->cp15
.c0_c1
, cortexa9_cp15_c0_c1
, 8 * sizeof(uint32_t));
148 memcpy(env
->cp15
.c0_c2
, cortexa9_cp15_c0_c2
, 8 * sizeof(uint32_t));
149 env
->cp15
.c0_cachetype
= 0x80038003;
150 env
->cp15
.c0_clid
= (1 << 27) | (1 << 24) | 3;
151 env
->cp15
.c0_ccsid
[0] = 0xe00fe015; /* 16k L1 dcache. */
152 env
->cp15
.c0_ccsid
[1] = 0x200fe015; /* 16k L1 icache. */
153 env
->cp15
.c1_sys
= 0x00c50078;
155 case ARM_CPUID_CORTEXM3
:
156 set_feature(env
, ARM_FEATURE_V4T
);
157 set_feature(env
, ARM_FEATURE_V5
);
158 set_feature(env
, ARM_FEATURE_V6
);
159 set_feature(env
, ARM_FEATURE_THUMB2
);
160 set_feature(env
, ARM_FEATURE_V7
);
161 set_feature(env
, ARM_FEATURE_M
);
162 set_feature(env
, ARM_FEATURE_DIV
);
164 case ARM_CPUID_ANY
: /* For userspace emulation. */
165 set_feature(env
, ARM_FEATURE_V4T
);
166 set_feature(env
, ARM_FEATURE_V5
);
167 set_feature(env
, ARM_FEATURE_V6
);
168 set_feature(env
, ARM_FEATURE_V6K
);
169 set_feature(env
, ARM_FEATURE_V7
);
170 set_feature(env
, ARM_FEATURE_THUMB2
);
171 set_feature(env
, ARM_FEATURE_VFP
);
172 set_feature(env
, ARM_FEATURE_VFP3
);
173 set_feature(env
, ARM_FEATURE_VFP_FP16
);
174 set_feature(env
, ARM_FEATURE_NEON
);
175 set_feature(env
, ARM_FEATURE_THUMB2EE
);
176 set_feature(env
, ARM_FEATURE_DIV
);
177 set_feature(env
, ARM_FEATURE_V7MP
);
179 case ARM_CPUID_TI915T
:
180 case ARM_CPUID_TI925T
:
181 set_feature(env
, ARM_FEATURE_V4T
);
182 set_feature(env
, ARM_FEATURE_OMAPCP
);
183 env
->cp15
.c0_cpuid
= ARM_CPUID_TI925T
; /* Depends on wiring. */
184 env
->cp15
.c0_cachetype
= 0x5109149;
185 env
->cp15
.c1_sys
= 0x00000070;
186 env
->cp15
.c15_i_max
= 0x000;
187 env
->cp15
.c15_i_min
= 0xff0;
189 case ARM_CPUID_PXA250
:
190 case ARM_CPUID_PXA255
:
191 case ARM_CPUID_PXA260
:
192 case ARM_CPUID_PXA261
:
193 case ARM_CPUID_PXA262
:
194 set_feature(env
, ARM_FEATURE_V4T
);
195 set_feature(env
, ARM_FEATURE_V5
);
196 set_feature(env
, ARM_FEATURE_XSCALE
);
197 /* JTAG_ID is ((id << 28) | 0x09265013) */
198 env
->cp15
.c0_cachetype
= 0xd172172;
199 env
->cp15
.c1_sys
= 0x00000078;
201 case ARM_CPUID_PXA270_A0
:
202 case ARM_CPUID_PXA270_A1
:
203 case ARM_CPUID_PXA270_B0
:
204 case ARM_CPUID_PXA270_B1
:
205 case ARM_CPUID_PXA270_C0
:
206 case ARM_CPUID_PXA270_C5
:
207 set_feature(env
, ARM_FEATURE_V4T
);
208 set_feature(env
, ARM_FEATURE_V5
);
209 set_feature(env
, ARM_FEATURE_XSCALE
);
210 /* JTAG_ID is ((id << 28) | 0x09265013) */
211 set_feature(env
, ARM_FEATURE_IWMMXT
);
212 env
->iwmmxt
.cregs
[ARM_IWMMXT_wCID
] = 0x69051000 | 'Q';
213 env
->cp15
.c0_cachetype
= 0xd172172;
214 env
->cp15
.c1_sys
= 0x00000078;
216 case ARM_CPUID_SA1100
:
217 case ARM_CPUID_SA1110
:
218 set_feature(env
, ARM_FEATURE_STRONGARM
);
219 env
->cp15
.c1_sys
= 0x00000070;
222 cpu_abort(env
, "Bad CPU ID: %x\n", id
);
227 void cpu_reset(CPUARMState
*env
)
231 if (qemu_loglevel_mask(CPU_LOG_RESET
)) {
232 qemu_log("CPU Reset (CPU %d)\n", env
->cpu_index
);
233 log_cpu_state(env
, 0);
236 id
= env
->cp15
.c0_cpuid
;
237 memset(env
, 0, offsetof(CPUARMState
, breakpoints
));
239 cpu_reset_model_id(env
, id
);
240 #if defined (CONFIG_USER_ONLY)
241 env
->uncached_cpsr
= ARM_CPU_MODE_USR
;
242 /* For user mode we must enable access to coprocessors */
243 env
->vfp
.xregs
[ARM_VFP_FPEXC
] = 1 << 30;
244 if (arm_feature(env
, ARM_FEATURE_IWMMXT
)) {
245 env
->cp15
.c15_cpar
= 3;
246 } else if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
247 env
->cp15
.c15_cpar
= 1;
250 /* SVC mode with interrupts disabled. */
251 env
->uncached_cpsr
= ARM_CPU_MODE_SVC
| CPSR_A
| CPSR_F
| CPSR_I
;
252 /* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is
253 clear at reset. Initial SP and PC are loaded from ROM. */
257 env
->uncached_cpsr
&= ~CPSR_I
;
260 /* We should really use ldl_phys here, in case the guest
261 modified flash and reset itself. However images
262 loaded via -kenrel have not been copied yet, so load the
263 values directly from there. */
264 env
->regs
[13] = ldl_p(rom
);
267 env
->regs
[15] = pc
& ~1;
270 env
->vfp
.xregs
[ARM_VFP_FPEXC
] = 0;
271 env
->cp15
.c2_base_mask
= 0xffffc000u
;
272 /* v7 performance monitor control register: same implementor
273 * field as main ID register, and we implement no event counters.
275 env
->cp15
.c9_pmcr
= (id
& 0xff000000);
277 set_flush_to_zero(1, &env
->vfp
.standard_fp_status
);
278 set_flush_inputs_to_zero(1, &env
->vfp
.standard_fp_status
);
279 set_default_nan_mode(1, &env
->vfp
.standard_fp_status
);
280 set_float_detect_tininess(float_tininess_before_rounding
,
281 &env
->vfp
.fp_status
);
282 set_float_detect_tininess(float_tininess_before_rounding
,
283 &env
->vfp
.standard_fp_status
);
287 static int vfp_gdb_get_reg(CPUState
*env
, uint8_t *buf
, int reg
)
291 /* VFP data registers are always little-endian. */
292 nregs
= arm_feature(env
, ARM_FEATURE_VFP3
) ? 32 : 16;
294 stfq_le_p(buf
, env
->vfp
.regs
[reg
]);
297 if (arm_feature(env
, ARM_FEATURE_NEON
)) {
298 /* Aliases for Q regs. */
301 stfq_le_p(buf
, env
->vfp
.regs
[(reg
- 32) * 2]);
302 stfq_le_p(buf
+ 8, env
->vfp
.regs
[(reg
- 32) * 2 + 1]);
306 switch (reg
- nregs
) {
307 case 0: stl_p(buf
, env
->vfp
.xregs
[ARM_VFP_FPSID
]); return 4;
308 case 1: stl_p(buf
, env
->vfp
.xregs
[ARM_VFP_FPSCR
]); return 4;
309 case 2: stl_p(buf
, env
->vfp
.xregs
[ARM_VFP_FPEXC
]); return 4;
314 static int vfp_gdb_set_reg(CPUState
*env
, uint8_t *buf
, int reg
)
318 nregs
= arm_feature(env
, ARM_FEATURE_VFP3
) ? 32 : 16;
320 env
->vfp
.regs
[reg
] = ldfq_le_p(buf
);
323 if (arm_feature(env
, ARM_FEATURE_NEON
)) {
326 env
->vfp
.regs
[(reg
- 32) * 2] = ldfq_le_p(buf
);
327 env
->vfp
.regs
[(reg
- 32) * 2 + 1] = ldfq_le_p(buf
+ 8);
331 switch (reg
- nregs
) {
332 case 0: env
->vfp
.xregs
[ARM_VFP_FPSID
] = ldl_p(buf
); return 4;
333 case 1: env
->vfp
.xregs
[ARM_VFP_FPSCR
] = ldl_p(buf
); return 4;
334 case 2: env
->vfp
.xregs
[ARM_VFP_FPEXC
] = ldl_p(buf
) & (1 << 30); return 4;
339 CPUARMState
*cpu_arm_init(const char *cpu_model
)
343 static int inited
= 0;
345 id
= cpu_arm_find_by_name(cpu_model
);
348 env
= qemu_mallocz(sizeof(CPUARMState
));
352 arm_translate_init();
355 env
->cpu_model_str
= cpu_model
;
356 env
->cp15
.c0_cpuid
= id
;
358 if (arm_feature(env
, ARM_FEATURE_NEON
)) {
359 gdb_register_coprocessor(env
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
360 51, "arm-neon.xml", 0);
361 } else if (arm_feature(env
, ARM_FEATURE_VFP3
)) {
362 gdb_register_coprocessor(env
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
363 35, "arm-vfp3.xml", 0);
364 } else if (arm_feature(env
, ARM_FEATURE_VFP
)) {
365 gdb_register_coprocessor(env
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
366 19, "arm-vfp.xml", 0);
377 static const struct arm_cpu_t arm_cpu_names
[] = {
378 { ARM_CPUID_ARM926
, "arm926"},
379 { ARM_CPUID_ARM946
, "arm946"},
380 { ARM_CPUID_ARM1026
, "arm1026"},
381 { ARM_CPUID_ARM1136
, "arm1136"},
382 { ARM_CPUID_ARM1136_R2
, "arm1136-r2"},
383 { ARM_CPUID_ARM11MPCORE
, "arm11mpcore"},
384 { ARM_CPUID_CORTEXM3
, "cortex-m3"},
385 { ARM_CPUID_CORTEXA8
, "cortex-a8"},
386 { ARM_CPUID_CORTEXA9
, "cortex-a9"},
387 { ARM_CPUID_TI925T
, "ti925t" },
388 { ARM_CPUID_PXA250
, "pxa250" },
389 { ARM_CPUID_SA1100
, "sa1100" },
390 { ARM_CPUID_SA1110
, "sa1110" },
391 { ARM_CPUID_PXA255
, "pxa255" },
392 { ARM_CPUID_PXA260
, "pxa260" },
393 { ARM_CPUID_PXA261
, "pxa261" },
394 { ARM_CPUID_PXA262
, "pxa262" },
395 { ARM_CPUID_PXA270
, "pxa270" },
396 { ARM_CPUID_PXA270_A0
, "pxa270-a0" },
397 { ARM_CPUID_PXA270_A1
, "pxa270-a1" },
398 { ARM_CPUID_PXA270_B0
, "pxa270-b0" },
399 { ARM_CPUID_PXA270_B1
, "pxa270-b1" },
400 { ARM_CPUID_PXA270_C0
, "pxa270-c0" },
401 { ARM_CPUID_PXA270_C5
, "pxa270-c5" },
402 { ARM_CPUID_ANY
, "any"},
406 void arm_cpu_list(FILE *f
, fprintf_function cpu_fprintf
)
410 (*cpu_fprintf
)(f
, "Available CPUs:\n");
411 for (i
= 0; arm_cpu_names
[i
].name
; i
++) {
412 (*cpu_fprintf
)(f
, " %s\n", arm_cpu_names
[i
].name
);
416 /* return 0 if not found */
417 static uint32_t cpu_arm_find_by_name(const char *name
)
423 for (i
= 0; arm_cpu_names
[i
].name
; i
++) {
424 if (strcmp(name
, arm_cpu_names
[i
].name
) == 0) {
425 id
= arm_cpu_names
[i
].id
;
432 void cpu_arm_close(CPUARMState
*env
)
437 uint32_t cpsr_read(CPUARMState
*env
)
441 return env
->uncached_cpsr
| (env
->NF
& 0x80000000) | (ZF
<< 30) |
442 (env
->CF
<< 29) | ((env
->VF
& 0x80000000) >> 3) | (env
->QF
<< 27)
443 | (env
->thumb
<< 5) | ((env
->condexec_bits
& 3) << 25)
444 | ((env
->condexec_bits
& 0xfc) << 8)
448 void cpsr_write(CPUARMState
*env
, uint32_t val
, uint32_t mask
)
450 if (mask
& CPSR_NZCV
) {
451 env
->ZF
= (~val
) & CPSR_Z
;
453 env
->CF
= (val
>> 29) & 1;
454 env
->VF
= (val
<< 3) & 0x80000000;
457 env
->QF
= ((val
& CPSR_Q
) != 0);
459 env
->thumb
= ((val
& CPSR_T
) != 0);
460 if (mask
& CPSR_IT_0_1
) {
461 env
->condexec_bits
&= ~3;
462 env
->condexec_bits
|= (val
>> 25) & 3;
464 if (mask
& CPSR_IT_2_7
) {
465 env
->condexec_bits
&= 3;
466 env
->condexec_bits
|= (val
>> 8) & 0xfc;
468 if (mask
& CPSR_GE
) {
469 env
->GE
= (val
>> 16) & 0xf;
472 if ((env
->uncached_cpsr
^ val
) & mask
& CPSR_M
) {
473 switch_mode(env
, val
& CPSR_M
);
475 mask
&= ~CACHED_CPSR_BITS
;
476 env
->uncached_cpsr
= (env
->uncached_cpsr
& ~mask
) | (val
& mask
);
479 /* Sign/zero extend */
480 uint32_t HELPER(sxtb16
)(uint32_t x
)
483 res
= (uint16_t)(int8_t)x
;
484 res
|= (uint32_t)(int8_t)(x
>> 16) << 16;
488 uint32_t HELPER(uxtb16
)(uint32_t x
)
491 res
= (uint16_t)(uint8_t)x
;
492 res
|= (uint32_t)(uint8_t)(x
>> 16) << 16;
496 uint32_t HELPER(clz
)(uint32_t x
)
501 int32_t HELPER(sdiv
)(int32_t num
, int32_t den
)
505 if (num
== INT_MIN
&& den
== -1)
510 uint32_t HELPER(udiv
)(uint32_t num
, uint32_t den
)
517 uint32_t HELPER(rbit
)(uint32_t x
)
519 x
= ((x
& 0xff000000) >> 24)
520 | ((x
& 0x00ff0000) >> 8)
521 | ((x
& 0x0000ff00) << 8)
522 | ((x
& 0x000000ff) << 24);
523 x
= ((x
& 0xf0f0f0f0) >> 4)
524 | ((x
& 0x0f0f0f0f) << 4);
525 x
= ((x
& 0x88888888) >> 3)
526 | ((x
& 0x44444444) >> 1)
527 | ((x
& 0x22222222) << 1)
528 | ((x
& 0x11111111) << 3);
532 uint32_t HELPER(abs
)(uint32_t x
)
534 return ((int32_t)x
< 0) ? -x
: x
;
537 #if defined(CONFIG_USER_ONLY)
539 void do_interrupt (CPUState
*env
)
541 env
->exception_index
= -1;
544 int cpu_arm_handle_mmu_fault (CPUState
*env
, target_ulong address
, int rw
,
548 env
->exception_index
= EXCP_PREFETCH_ABORT
;
549 env
->cp15
.c6_insn
= address
;
551 env
->exception_index
= EXCP_DATA_ABORT
;
552 env
->cp15
.c6_data
= address
;
557 /* These should probably raise undefined insn exceptions. */
558 void HELPER(set_cp
)(CPUState
*env
, uint32_t insn
, uint32_t val
)
560 int op1
= (insn
>> 8) & 0xf;
561 cpu_abort(env
, "cp%i insn %08x\n", op1
, insn
);
565 uint32_t HELPER(get_cp
)(CPUState
*env
, uint32_t insn
)
567 int op1
= (insn
>> 8) & 0xf;
568 cpu_abort(env
, "cp%i insn %08x\n", op1
, insn
);
572 void HELPER(set_cp15
)(CPUState
*env
, uint32_t insn
, uint32_t val
)
574 cpu_abort(env
, "cp15 insn %08x\n", insn
);
577 uint32_t HELPER(get_cp15
)(CPUState
*env
, uint32_t insn
)
579 cpu_abort(env
, "cp15 insn %08x\n", insn
);
582 /* These should probably raise undefined insn exceptions. */
583 void HELPER(v7m_msr
)(CPUState
*env
, uint32_t reg
, uint32_t val
)
585 cpu_abort(env
, "v7m_mrs %d\n", reg
);
588 uint32_t HELPER(v7m_mrs
)(CPUState
*env
, uint32_t reg
)
590 cpu_abort(env
, "v7m_mrs %d\n", reg
);
594 void switch_mode(CPUState
*env
, int mode
)
596 if (mode
!= ARM_CPU_MODE_USR
)
597 cpu_abort(env
, "Tried to switch out of user mode\n");
600 void HELPER(set_r13_banked
)(CPUState
*env
, uint32_t mode
, uint32_t val
)
602 cpu_abort(env
, "banked r13 write\n");
605 uint32_t HELPER(get_r13_banked
)(CPUState
*env
, uint32_t mode
)
607 cpu_abort(env
, "banked r13 read\n");
613 extern int semihosting_enabled
;
615 /* Map CPU modes onto saved register banks. */
616 static inline int bank_number (int mode
)
619 case ARM_CPU_MODE_USR
:
620 case ARM_CPU_MODE_SYS
:
622 case ARM_CPU_MODE_SVC
:
624 case ARM_CPU_MODE_ABT
:
626 case ARM_CPU_MODE_UND
:
628 case ARM_CPU_MODE_IRQ
:
630 case ARM_CPU_MODE_FIQ
:
633 cpu_abort(cpu_single_env
, "Bad mode %x\n", mode
);
637 void switch_mode(CPUState
*env
, int mode
)
642 old_mode
= env
->uncached_cpsr
& CPSR_M
;
643 if (mode
== old_mode
)
646 if (old_mode
== ARM_CPU_MODE_FIQ
) {
647 memcpy (env
->fiq_regs
, env
->regs
+ 8, 5 * sizeof(uint32_t));
648 memcpy (env
->regs
+ 8, env
->usr_regs
, 5 * sizeof(uint32_t));
649 } else if (mode
== ARM_CPU_MODE_FIQ
) {
650 memcpy (env
->usr_regs
, env
->regs
+ 8, 5 * sizeof(uint32_t));
651 memcpy (env
->regs
+ 8, env
->fiq_regs
, 5 * sizeof(uint32_t));
654 i
= bank_number(old_mode
);
655 env
->banked_r13
[i
] = env
->regs
[13];
656 env
->banked_r14
[i
] = env
->regs
[14];
657 env
->banked_spsr
[i
] = env
->spsr
;
659 i
= bank_number(mode
);
660 env
->regs
[13] = env
->banked_r13
[i
];
661 env
->regs
[14] = env
->banked_r14
[i
];
662 env
->spsr
= env
->banked_spsr
[i
];
665 static void v7m_push(CPUARMState
*env
, uint32_t val
)
668 stl_phys(env
->regs
[13], val
);
671 static uint32_t v7m_pop(CPUARMState
*env
)
674 val
= ldl_phys(env
->regs
[13]);
679 /* Switch to V7M main or process stack pointer. */
680 static void switch_v7m_sp(CPUARMState
*env
, int process
)
683 if (env
->v7m
.current_sp
!= process
) {
684 tmp
= env
->v7m
.other_sp
;
685 env
->v7m
.other_sp
= env
->regs
[13];
687 env
->v7m
.current_sp
= process
;
691 static void do_v7m_exception_exit(CPUARMState
*env
)
696 type
= env
->regs
[15];
697 if (env
->v7m
.exception
!= 0)
698 armv7m_nvic_complete_irq(env
->nvic
, env
->v7m
.exception
);
700 /* Switch to the target stack. */
701 switch_v7m_sp(env
, (type
& 4) != 0);
703 env
->regs
[0] = v7m_pop(env
);
704 env
->regs
[1] = v7m_pop(env
);
705 env
->regs
[2] = v7m_pop(env
);
706 env
->regs
[3] = v7m_pop(env
);
707 env
->regs
[12] = v7m_pop(env
);
708 env
->regs
[14] = v7m_pop(env
);
709 env
->regs
[15] = v7m_pop(env
);
711 xpsr_write(env
, xpsr
, 0xfffffdff);
712 /* Undo stack alignment. */
715 /* ??? The exception return type specifies Thread/Handler mode. However
716 this is also implied by the xPSR value. Not sure what to do
717 if there is a mismatch. */
718 /* ??? Likewise for mismatches between the CONTROL register and the stack
722 static void do_interrupt_v7m(CPUARMState
*env
)
724 uint32_t xpsr
= xpsr_read(env
);
729 if (env
->v7m
.current_sp
)
731 if (env
->v7m
.exception
== 0)
734 /* For exceptions we just mark as pending on the NVIC, and let that
736 /* TODO: Need to escalate if the current priority is higher than the
737 one we're raising. */
738 switch (env
->exception_index
) {
740 armv7m_nvic_set_pending(env
->nvic
, ARMV7M_EXCP_USAGE
);
744 armv7m_nvic_set_pending(env
->nvic
, ARMV7M_EXCP_SVC
);
746 case EXCP_PREFETCH_ABORT
:
747 case EXCP_DATA_ABORT
:
748 armv7m_nvic_set_pending(env
->nvic
, ARMV7M_EXCP_MEM
);
751 if (semihosting_enabled
) {
753 nr
= lduw_code(env
->regs
[15]) & 0xff;
756 env
->regs
[0] = do_arm_semihosting(env
);
760 armv7m_nvic_set_pending(env
->nvic
, ARMV7M_EXCP_DEBUG
);
763 env
->v7m
.exception
= armv7m_nvic_acknowledge_irq(env
->nvic
);
765 case EXCP_EXCEPTION_EXIT
:
766 do_v7m_exception_exit(env
);
769 cpu_abort(env
, "Unhandled exception 0x%x\n", env
->exception_index
);
770 return; /* Never happens. Keep compiler happy. */
773 /* Align stack pointer. */
774 /* ??? Should only do this if Configuration Control Register
775 STACKALIGN bit is set. */
776 if (env
->regs
[13] & 4) {
780 /* Switch to the handler mode. */
782 v7m_push(env
, env
->regs
[15]);
783 v7m_push(env
, env
->regs
[14]);
784 v7m_push(env
, env
->regs
[12]);
785 v7m_push(env
, env
->regs
[3]);
786 v7m_push(env
, env
->regs
[2]);
787 v7m_push(env
, env
->regs
[1]);
788 v7m_push(env
, env
->regs
[0]);
789 switch_v7m_sp(env
, 0);
790 env
->uncached_cpsr
&= ~CPSR_IT
;
792 addr
= ldl_phys(env
->v7m
.vecbase
+ env
->v7m
.exception
* 4);
793 env
->regs
[15] = addr
& 0xfffffffe;
794 env
->thumb
= addr
& 1;
797 /* Handle a CPU exception. */
798 void do_interrupt(CPUARMState
*env
)
806 do_interrupt_v7m(env
);
809 /* TODO: Vectored interrupt controller. */
810 switch (env
->exception_index
) {
812 new_mode
= ARM_CPU_MODE_UND
;
821 if (semihosting_enabled
) {
822 /* Check for semihosting interrupt. */
824 mask
= lduw_code(env
->regs
[15] - 2) & 0xff;
826 mask
= ldl_code(env
->regs
[15] - 4) & 0xffffff;
828 /* Only intercept calls from privileged modes, to provide some
829 semblance of security. */
830 if (((mask
== 0x123456 && !env
->thumb
)
831 || (mask
== 0xab && env
->thumb
))
832 && (env
->uncached_cpsr
& CPSR_M
) != ARM_CPU_MODE_USR
) {
833 env
->regs
[0] = do_arm_semihosting(env
);
837 new_mode
= ARM_CPU_MODE_SVC
;
840 /* The PC already points to the next instruction. */
844 /* See if this is a semihosting syscall. */
845 if (env
->thumb
&& semihosting_enabled
) {
846 mask
= lduw_code(env
->regs
[15]) & 0xff;
848 && (env
->uncached_cpsr
& CPSR_M
) != ARM_CPU_MODE_USR
) {
850 env
->regs
[0] = do_arm_semihosting(env
);
854 env
->cp15
.c5_insn
= 2;
855 /* Fall through to prefetch abort. */
856 case EXCP_PREFETCH_ABORT
:
857 new_mode
= ARM_CPU_MODE_ABT
;
859 mask
= CPSR_A
| CPSR_I
;
862 case EXCP_DATA_ABORT
:
863 new_mode
= ARM_CPU_MODE_ABT
;
865 mask
= CPSR_A
| CPSR_I
;
869 new_mode
= ARM_CPU_MODE_IRQ
;
871 /* Disable IRQ and imprecise data aborts. */
872 mask
= CPSR_A
| CPSR_I
;
876 new_mode
= ARM_CPU_MODE_FIQ
;
878 /* Disable FIQ, IRQ and imprecise data aborts. */
879 mask
= CPSR_A
| CPSR_I
| CPSR_F
;
883 cpu_abort(env
, "Unhandled exception 0x%x\n", env
->exception_index
);
884 return; /* Never happens. Keep compiler happy. */
887 if (env
->cp15
.c1_sys
& (1 << 13)) {
890 switch_mode (env
, new_mode
);
891 env
->spsr
= cpsr_read(env
);
893 env
->condexec_bits
= 0;
894 /* Switch to the new mode, and to the correct instruction set. */
895 env
->uncached_cpsr
= (env
->uncached_cpsr
& ~CPSR_M
) | new_mode
;
896 env
->uncached_cpsr
|= mask
;
897 /* this is a lie, as the was no c1_sys on V4T/V5, but who cares
898 * and we should just guard the thumb mode on V4 */
899 if (arm_feature(env
, ARM_FEATURE_V4T
)) {
900 env
->thumb
= (env
->cp15
.c1_sys
& (1 << 30)) != 0;
902 env
->regs
[14] = env
->regs
[15] + offset
;
903 env
->regs
[15] = addr
;
904 env
->interrupt_request
|= CPU_INTERRUPT_EXITTB
;
907 /* Check section/page access permissions.
908 Returns the page protection flags, or zero if the access is not
910 static inline int check_ap(CPUState
*env
, int ap
, int domain
, int access_type
,
916 return PAGE_READ
| PAGE_WRITE
;
918 if (access_type
== 1)
925 if (access_type
== 1)
927 switch ((env
->cp15
.c1_sys
>> 8) & 3) {
929 return is_user
? 0 : PAGE_READ
;
936 return is_user
? 0 : PAGE_READ
| PAGE_WRITE
;
941 return PAGE_READ
| PAGE_WRITE
;
943 return PAGE_READ
| PAGE_WRITE
;
944 case 4: /* Reserved. */
947 return is_user
? 0 : prot_ro
;
951 if (!arm_feature (env
, ARM_FEATURE_V7
))
959 static uint32_t get_level1_table_address(CPUState
*env
, uint32_t address
)
963 if (address
& env
->cp15
.c2_mask
)
964 table
= env
->cp15
.c2_base1
& 0xffffc000;
966 table
= env
->cp15
.c2_base0
& env
->cp15
.c2_base_mask
;
968 table
|= (address
>> 18) & 0x3ffc;
972 static int get_phys_addr_v5(CPUState
*env
, uint32_t address
, int access_type
,
973 int is_user
, uint32_t *phys_ptr
, int *prot
,
974 target_ulong
*page_size
)
984 /* Pagetable walk. */
985 /* Lookup l1 descriptor. */
986 table
= get_level1_table_address(env
, address
);
987 desc
= ldl_phys(table
);
989 domain
= (env
->cp15
.c3
>> ((desc
>> 4) & 0x1e)) & 3;
991 /* Section translation fault. */
995 if (domain
== 0 || domain
== 2) {
997 code
= 9; /* Section domain fault. */
999 code
= 11; /* Page domain fault. */
1004 phys_addr
= (desc
& 0xfff00000) | (address
& 0x000fffff);
1005 ap
= (desc
>> 10) & 3;
1007 *page_size
= 1024 * 1024;
1009 /* Lookup l2 entry. */
1011 /* Coarse pagetable. */
1012 table
= (desc
& 0xfffffc00) | ((address
>> 10) & 0x3fc);
1014 /* Fine pagetable. */
1015 table
= (desc
& 0xfffff000) | ((address
>> 8) & 0xffc);
1017 desc
= ldl_phys(table
);
1019 case 0: /* Page translation fault. */
1022 case 1: /* 64k page. */
1023 phys_addr
= (desc
& 0xffff0000) | (address
& 0xffff);
1024 ap
= (desc
>> (4 + ((address
>> 13) & 6))) & 3;
1025 *page_size
= 0x10000;
1027 case 2: /* 4k page. */
1028 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
1029 ap
= (desc
>> (4 + ((address
>> 13) & 6))) & 3;
1030 *page_size
= 0x1000;
1032 case 3: /* 1k page. */
1034 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
1035 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
1037 /* Page translation fault. */
1042 phys_addr
= (desc
& 0xfffffc00) | (address
& 0x3ff);
1044 ap
= (desc
>> 4) & 3;
1048 /* Never happens, but compiler isn't smart enough to tell. */
1053 *prot
= check_ap(env
, ap
, domain
, access_type
, is_user
);
1055 /* Access permission fault. */
1059 *phys_ptr
= phys_addr
;
1062 return code
| (domain
<< 4);
1065 static int get_phys_addr_v6(CPUState
*env
, uint32_t address
, int access_type
,
1066 int is_user
, uint32_t *phys_ptr
, int *prot
,
1067 target_ulong
*page_size
)
1078 /* Pagetable walk. */
1079 /* Lookup l1 descriptor. */
1080 table
= get_level1_table_address(env
, address
);
1081 desc
= ldl_phys(table
);
1084 /* Section translation fault. */
1088 } else if (type
== 2 && (desc
& (1 << 18))) {
1092 /* Section or page. */
1093 domain
= (desc
>> 4) & 0x1e;
1095 domain
= (env
->cp15
.c3
>> domain
) & 3;
1096 if (domain
== 0 || domain
== 2) {
1098 code
= 9; /* Section domain fault. */
1100 code
= 11; /* Page domain fault. */
1104 if (desc
& (1 << 18)) {
1106 phys_addr
= (desc
& 0xff000000) | (address
& 0x00ffffff);
1107 *page_size
= 0x1000000;
1110 phys_addr
= (desc
& 0xfff00000) | (address
& 0x000fffff);
1111 *page_size
= 0x100000;
1113 ap
= ((desc
>> 10) & 3) | ((desc
>> 13) & 4);
1114 xn
= desc
& (1 << 4);
1117 /* Lookup l2 entry. */
1118 table
= (desc
& 0xfffffc00) | ((address
>> 10) & 0x3fc);
1119 desc
= ldl_phys(table
);
1120 ap
= ((desc
>> 4) & 3) | ((desc
>> 7) & 4);
1122 case 0: /* Page translation fault. */
1125 case 1: /* 64k page. */
1126 phys_addr
= (desc
& 0xffff0000) | (address
& 0xffff);
1127 xn
= desc
& (1 << 15);
1128 *page_size
= 0x10000;
1130 case 2: case 3: /* 4k page. */
1131 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
1133 *page_size
= 0x1000;
1136 /* Never happens, but compiler isn't smart enough to tell. */
1142 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
1144 if (xn
&& access_type
== 2)
1147 /* The simplified model uses AP[0] as an access control bit. */
1148 if ((env
->cp15
.c1_sys
& (1 << 29)) && (ap
& 1) == 0) {
1149 /* Access flag fault. */
1150 code
= (code
== 15) ? 6 : 3;
1153 *prot
= check_ap(env
, ap
, domain
, access_type
, is_user
);
1155 /* Access permission fault. */
1162 *phys_ptr
= phys_addr
;
1165 return code
| (domain
<< 4);
1168 static int get_phys_addr_mpu(CPUState
*env
, uint32_t address
, int access_type
,
1169 int is_user
, uint32_t *phys_ptr
, int *prot
)
1175 *phys_ptr
= address
;
1176 for (n
= 7; n
>= 0; n
--) {
1177 base
= env
->cp15
.c6_region
[n
];
1178 if ((base
& 1) == 0)
1180 mask
= 1 << ((base
>> 1) & 0x1f);
1181 /* Keep this shift separate from the above to avoid an
1182 (undefined) << 32. */
1183 mask
= (mask
<< 1) - 1;
1184 if (((base
^ address
) & ~mask
) == 0)
1190 if (access_type
== 2) {
1191 mask
= env
->cp15
.c5_insn
;
1193 mask
= env
->cp15
.c5_data
;
1195 mask
= (mask
>> (n
* 4)) & 0xf;
1202 *prot
= PAGE_READ
| PAGE_WRITE
;
1207 *prot
|= PAGE_WRITE
;
1210 *prot
= PAGE_READ
| PAGE_WRITE
;
1221 /* Bad permission. */
1228 static inline int get_phys_addr(CPUState
*env
, uint32_t address
,
1229 int access_type
, int is_user
,
1230 uint32_t *phys_ptr
, int *prot
,
1231 target_ulong
*page_size
)
1233 /* Fast Context Switch Extension. */
1234 if (address
< 0x02000000)
1235 address
+= env
->cp15
.c13_fcse
;
1237 if ((env
->cp15
.c1_sys
& 1) == 0) {
1238 /* MMU/MPU disabled. */
1239 *phys_ptr
= address
;
1240 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
1241 *page_size
= TARGET_PAGE_SIZE
;
1243 } else if (arm_feature(env
, ARM_FEATURE_MPU
)) {
1244 *page_size
= TARGET_PAGE_SIZE
;
1245 return get_phys_addr_mpu(env
, address
, access_type
, is_user
, phys_ptr
,
1247 } else if (env
->cp15
.c1_sys
& (1 << 23)) {
1248 return get_phys_addr_v6(env
, address
, access_type
, is_user
, phys_ptr
,
1251 return get_phys_addr_v5(env
, address
, access_type
, is_user
, phys_ptr
,
1256 int cpu_arm_handle_mmu_fault (CPUState
*env
, target_ulong address
,
1257 int access_type
, int mmu_idx
)
1260 target_ulong page_size
;
1264 is_user
= mmu_idx
== MMU_USER_IDX
;
1265 ret
= get_phys_addr(env
, address
, access_type
, is_user
, &phys_addr
, &prot
,
1268 /* Map a single [sub]page. */
1269 phys_addr
&= ~(uint32_t)0x3ff;
1270 address
&= ~(uint32_t)0x3ff;
1271 tlb_set_page (env
, address
, phys_addr
, prot
, mmu_idx
, page_size
);
1275 if (access_type
== 2) {
1276 env
->cp15
.c5_insn
= ret
;
1277 env
->cp15
.c6_insn
= address
;
1278 env
->exception_index
= EXCP_PREFETCH_ABORT
;
1280 env
->cp15
.c5_data
= ret
;
1281 if (access_type
== 1 && arm_feature(env
, ARM_FEATURE_V6
))
1282 env
->cp15
.c5_data
|= (1 << 11);
1283 env
->cp15
.c6_data
= address
;
1284 env
->exception_index
= EXCP_DATA_ABORT
;
1289 target_phys_addr_t
cpu_get_phys_page_debug(CPUState
*env
, target_ulong addr
)
1292 target_ulong page_size
;
1296 ret
= get_phys_addr(env
, addr
, 0, 0, &phys_addr
, &prot
, &page_size
);
1304 void HELPER(set_cp
)(CPUState
*env
, uint32_t insn
, uint32_t val
)
1306 int cp_num
= (insn
>> 8) & 0xf;
1307 int cp_info
= (insn
>> 5) & 7;
1308 int src
= (insn
>> 16) & 0xf;
1309 int operand
= insn
& 0xf;
1311 if (env
->cp
[cp_num
].cp_write
)
1312 env
->cp
[cp_num
].cp_write(env
->cp
[cp_num
].opaque
,
1313 cp_info
, src
, operand
, val
);
1316 uint32_t HELPER(get_cp
)(CPUState
*env
, uint32_t insn
)
1318 int cp_num
= (insn
>> 8) & 0xf;
1319 int cp_info
= (insn
>> 5) & 7;
1320 int dest
= (insn
>> 16) & 0xf;
1321 int operand
= insn
& 0xf;
1323 if (env
->cp
[cp_num
].cp_read
)
1324 return env
->cp
[cp_num
].cp_read(env
->cp
[cp_num
].opaque
,
1325 cp_info
, dest
, operand
);
1329 /* Return basic MPU access permission bits. */
1330 static uint32_t simple_mpu_ap_bits(uint32_t val
)
1337 for (i
= 0; i
< 16; i
+= 2) {
1338 ret
|= (val
>> i
) & mask
;
1344 /* Pad basic MPU access permission bits to extended format. */
1345 static uint32_t extended_mpu_ap_bits(uint32_t val
)
1352 for (i
= 0; i
< 16; i
+= 2) {
1353 ret
|= (val
& mask
) << i
;
1359 void HELPER(set_cp15
)(CPUState
*env
, uint32_t insn
, uint32_t val
)
1365 op1
= (insn
>> 21) & 7;
1366 op2
= (insn
>> 5) & 7;
1368 switch ((insn
>> 16) & 0xf) {
1371 if (arm_feature(env
, ARM_FEATURE_XSCALE
))
1373 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1375 if (arm_feature(env
, ARM_FEATURE_V7
)
1376 && op1
== 2 && crm
== 0 && op2
== 0) {
1377 env
->cp15
.c0_cssel
= val
& 0xf;
1381 case 1: /* System configuration. */
1382 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1386 if (!arm_feature(env
, ARM_FEATURE_XSCALE
) || crm
== 0)
1387 env
->cp15
.c1_sys
= val
;
1388 /* ??? Lots of these bits are not implemented. */
1389 /* This may enable/disable the MMU, so do a TLB flush. */
1392 case 1: /* Auxiliary control register. */
1393 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
1394 env
->cp15
.c1_xscaleauxcr
= val
;
1397 /* Not implemented. */
1400 if (arm_feature(env
, ARM_FEATURE_XSCALE
))
1402 if (env
->cp15
.c1_coproc
!= val
) {
1403 env
->cp15
.c1_coproc
= val
;
1404 /* ??? Is this safe when called from within a TB? */
1412 case 2: /* MMU Page table control / MPU cache control. */
1413 if (arm_feature(env
, ARM_FEATURE_MPU
)) {
1416 env
->cp15
.c2_data
= val
;
1419 env
->cp15
.c2_insn
= val
;
1427 env
->cp15
.c2_base0
= val
;
1430 env
->cp15
.c2_base1
= val
;
1434 env
->cp15
.c2_control
= val
;
1435 env
->cp15
.c2_mask
= ~(((uint32_t)0xffffffffu
) >> val
);
1436 env
->cp15
.c2_base_mask
= ~((uint32_t)0x3fffu
>> val
);
1443 case 3: /* MMU Domain access control / MPU write buffer control. */
1445 tlb_flush(env
, 1); /* Flush TLB as domain not tracked in TLB */
1447 case 4: /* Reserved. */
1449 case 5: /* MMU Fault status / MPU access permission. */
1450 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1454 if (arm_feature(env
, ARM_FEATURE_MPU
))
1455 val
= extended_mpu_ap_bits(val
);
1456 env
->cp15
.c5_data
= val
;
1459 if (arm_feature(env
, ARM_FEATURE_MPU
))
1460 val
= extended_mpu_ap_bits(val
);
1461 env
->cp15
.c5_insn
= val
;
1464 if (!arm_feature(env
, ARM_FEATURE_MPU
))
1466 env
->cp15
.c5_data
= val
;
1469 if (!arm_feature(env
, ARM_FEATURE_MPU
))
1471 env
->cp15
.c5_insn
= val
;
1477 case 6: /* MMU Fault address / MPU base/size. */
1478 if (arm_feature(env
, ARM_FEATURE_MPU
)) {
1481 env
->cp15
.c6_region
[crm
] = val
;
1483 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1487 env
->cp15
.c6_data
= val
;
1489 case 1: /* ??? This is WFAR on armv6 */
1491 env
->cp15
.c6_insn
= val
;
1498 case 7: /* Cache control. */
1499 env
->cp15
.c15_i_max
= 0x000;
1500 env
->cp15
.c15_i_min
= 0xff0;
1504 /* No cache, so nothing to do except VA->PA translations. */
1505 if (arm_feature(env
, ARM_FEATURE_V6K
)) {
1508 if (arm_feature(env
, ARM_FEATURE_V7
)) {
1509 env
->cp15
.c7_par
= val
& 0xfffff6ff;
1511 env
->cp15
.c7_par
= val
& 0xfffff1ff;
1516 target_ulong page_size
;
1518 int ret
, is_user
= op2
& 2;
1519 int access_type
= op2
& 1;
1522 /* Other states are only available with TrustZone */
1525 ret
= get_phys_addr(env
, val
, access_type
, is_user
,
1526 &phys_addr
, &prot
, &page_size
);
1528 /* We do not set any attribute bits in the PAR */
1529 if (page_size
== (1 << 24)
1530 && arm_feature(env
, ARM_FEATURE_V7
)) {
1531 env
->cp15
.c7_par
= (phys_addr
& 0xff000000) | 1 << 1;
1533 env
->cp15
.c7_par
= phys_addr
& 0xfffff000;
1536 env
->cp15
.c7_par
= ((ret
& (10 << 1)) >> 5) |
1537 ((ret
& (12 << 1)) >> 6) |
1538 ((ret
& 0xf) << 1) | 1;
1545 case 8: /* MMU TLB control. */
1547 case 0: /* Invalidate all. */
1550 case 1: /* Invalidate single TLB entry. */
1551 tlb_flush_page(env
, val
& TARGET_PAGE_MASK
);
1553 case 2: /* Invalidate on ASID. */
1554 tlb_flush(env
, val
== 0);
1556 case 3: /* Invalidate single entry on MVA. */
1557 /* ??? This is like case 1, but ignores ASID. */
1565 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1567 if (arm_feature(env
, ARM_FEATURE_STRONGARM
))
1568 break; /* Ignore ReadBuffer access */
1570 case 0: /* Cache lockdown. */
1572 case 0: /* L1 cache. */
1575 env
->cp15
.c9_data
= val
;
1578 env
->cp15
.c9_insn
= val
;
1584 case 1: /* L2 cache. */
1585 /* Ignore writes to L2 lockdown/auxiliary registers. */
1591 case 1: /* TCM memory region registers. */
1592 /* Not implemented. */
1594 case 12: /* Performance monitor control */
1595 /* Performance monitors are implementation defined in v7,
1596 * but with an ARM recommended set of registers, which we
1597 * follow (although we don't actually implement any counters)
1599 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
1603 case 0: /* performance monitor control register */
1604 /* only the DP, X, D and E bits are writable */
1605 env
->cp15
.c9_pmcr
&= ~0x39;
1606 env
->cp15
.c9_pmcr
|= (val
& 0x39);
1608 case 1: /* Count enable set register */
1610 env
->cp15
.c9_pmcnten
|= val
;
1612 case 2: /* Count enable clear */
1614 env
->cp15
.c9_pmcnten
&= ~val
;
1616 case 3: /* Overflow flag status */
1617 env
->cp15
.c9_pmovsr
&= ~val
;
1619 case 4: /* Software increment */
1620 /* RAZ/WI since we don't implement the software-count event */
1622 case 5: /* Event counter selection register */
1623 /* Since we don't implement any events, writing to this register
1624 * is actually UNPREDICTABLE. So we choose to RAZ/WI.
1631 case 13: /* Performance counters */
1632 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
1636 case 0: /* Cycle count register: not implemented, so RAZ/WI */
1638 case 1: /* Event type select */
1639 env
->cp15
.c9_pmxevtyper
= val
& 0xff;
1641 case 2: /* Event count register */
1642 /* Unimplemented (we have no events), RAZ/WI */
1648 case 14: /* Performance monitor control */
1649 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
1653 case 0: /* user enable */
1654 env
->cp15
.c9_pmuserenr
= val
& 1;
1655 /* changes access rights for cp registers, so flush tbs */
1658 case 1: /* interrupt enable set */
1659 /* We have no event counters so only the C bit can be changed */
1661 env
->cp15
.c9_pminten
|= val
;
1663 case 2: /* interrupt enable clear */
1665 env
->cp15
.c9_pminten
&= ~val
;
1673 case 10: /* MMU TLB lockdown. */
1674 /* ??? TLB lockdown not implemented. */
1676 case 12: /* Reserved. */
1678 case 13: /* Process ID. */
1681 /* Unlike real hardware the qemu TLB uses virtual addresses,
1682 not modified virtual addresses, so this causes a TLB flush.
1684 if (env
->cp15
.c13_fcse
!= val
)
1686 env
->cp15
.c13_fcse
= val
;
1689 /* This changes the ASID, so do a TLB flush. */
1690 if (env
->cp15
.c13_context
!= val
1691 && !arm_feature(env
, ARM_FEATURE_MPU
))
1693 env
->cp15
.c13_context
= val
;
1699 case 14: /* Reserved. */
1701 case 15: /* Implementation specific. */
1702 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
1703 if (op2
== 0 && crm
== 1) {
1704 if (env
->cp15
.c15_cpar
!= (val
& 0x3fff)) {
1705 /* Changes cp0 to cp13 behavior, so needs a TB flush. */
1707 env
->cp15
.c15_cpar
= val
& 0x3fff;
1713 if (arm_feature(env
, ARM_FEATURE_OMAPCP
)) {
1717 case 1: /* Set TI925T configuration. */
1718 env
->cp15
.c15_ticonfig
= val
& 0xe7;
1719 env
->cp15
.c0_cpuid
= (val
& (1 << 5)) ? /* OS_TYPE bit */
1720 ARM_CPUID_TI915T
: ARM_CPUID_TI925T
;
1722 case 2: /* Set I_max. */
1723 env
->cp15
.c15_i_max
= val
;
1725 case 3: /* Set I_min. */
1726 env
->cp15
.c15_i_min
= val
;
1728 case 4: /* Set thread-ID. */
1729 env
->cp15
.c15_threadid
= val
& 0xffff;
1731 case 8: /* Wait-for-interrupt (deprecated). */
1732 cpu_interrupt(env
, CPU_INTERRUPT_HALT
);
1742 /* ??? For debugging only. Should raise illegal instruction exception. */
1743 cpu_abort(env
, "Unimplemented cp15 register write (c%d, c%d, {%d, %d})\n",
1744 (insn
>> 16) & 0xf, crm
, op1
, op2
);
1747 uint32_t HELPER(get_cp15
)(CPUState
*env
, uint32_t insn
)
1753 op1
= (insn
>> 21) & 7;
1754 op2
= (insn
>> 5) & 7;
1756 switch ((insn
>> 16) & 0xf) {
1757 case 0: /* ID codes. */
1763 case 0: /* Device ID. */
1764 return env
->cp15
.c0_cpuid
;
1765 case 1: /* Cache Type. */
1766 return env
->cp15
.c0_cachetype
;
1767 case 2: /* TCM status. */
1769 case 3: /* TLB type register. */
1770 return 0; /* No lockable TLB entries. */
1772 /* The MPIDR was standardised in v7; prior to
1773 * this it was implemented only in the 11MPCore.
1774 * For all other pre-v7 cores it does not exist.
1776 if (arm_feature(env
, ARM_FEATURE_V7
) ||
1777 ARM_CPUID(env
) == ARM_CPUID_ARM11MPCORE
) {
1778 int mpidr
= env
->cpu_index
;
1779 /* We don't support setting cluster ID ([8..11])
1780 * so these bits always RAZ.
1782 if (arm_feature(env
, ARM_FEATURE_V7MP
)) {
1784 /* Cores which are uniprocessor (non-coherent)
1785 * but still implement the MP extensions set
1786 * bit 30. (For instance, A9UP.) However we do
1787 * not currently model any of those cores.
1792 /* otherwise fall through to the unimplemented-reg case */
1797 if (!arm_feature(env
, ARM_FEATURE_V6
))
1799 return env
->cp15
.c0_c1
[op2
];
1801 if (!arm_feature(env
, ARM_FEATURE_V6
))
1803 return env
->cp15
.c0_c2
[op2
];
1804 case 3: case 4: case 5: case 6: case 7:
1810 /* These registers aren't documented on arm11 cores. However
1811 Linux looks at them anyway. */
1812 if (!arm_feature(env
, ARM_FEATURE_V6
))
1816 if (!arm_feature(env
, ARM_FEATURE_V7
))
1821 return env
->cp15
.c0_ccsid
[env
->cp15
.c0_cssel
];
1823 return env
->cp15
.c0_clid
;
1829 if (op2
!= 0 || crm
!= 0)
1831 return env
->cp15
.c0_cssel
;
1835 case 1: /* System configuration. */
1836 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1839 case 0: /* Control register. */
1840 return env
->cp15
.c1_sys
;
1841 case 1: /* Auxiliary control register. */
1842 if (arm_feature(env
, ARM_FEATURE_XSCALE
))
1843 return env
->cp15
.c1_xscaleauxcr
;
1844 if (!arm_feature(env
, ARM_FEATURE_AUXCR
))
1846 switch (ARM_CPUID(env
)) {
1847 case ARM_CPUID_ARM1026
:
1849 case ARM_CPUID_ARM1136
:
1850 case ARM_CPUID_ARM1136_R2
:
1852 case ARM_CPUID_ARM11MPCORE
:
1854 case ARM_CPUID_CORTEXA8
:
1856 case ARM_CPUID_CORTEXA9
:
1861 case 2: /* Coprocessor access register. */
1862 if (arm_feature(env
, ARM_FEATURE_XSCALE
))
1864 return env
->cp15
.c1_coproc
;
1868 case 2: /* MMU Page table control / MPU cache control. */
1869 if (arm_feature(env
, ARM_FEATURE_MPU
)) {
1872 return env
->cp15
.c2_data
;
1875 return env
->cp15
.c2_insn
;
1883 return env
->cp15
.c2_base0
;
1885 return env
->cp15
.c2_base1
;
1887 return env
->cp15
.c2_control
;
1892 case 3: /* MMU Domain access control / MPU write buffer control. */
1893 return env
->cp15
.c3
;
1894 case 4: /* Reserved. */
1896 case 5: /* MMU Fault status / MPU access permission. */
1897 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1901 if (arm_feature(env
, ARM_FEATURE_MPU
))
1902 return simple_mpu_ap_bits(env
->cp15
.c5_data
);
1903 return env
->cp15
.c5_data
;
1905 if (arm_feature(env
, ARM_FEATURE_MPU
))
1906 return simple_mpu_ap_bits(env
->cp15
.c5_data
);
1907 return env
->cp15
.c5_insn
;
1909 if (!arm_feature(env
, ARM_FEATURE_MPU
))
1911 return env
->cp15
.c5_data
;
1913 if (!arm_feature(env
, ARM_FEATURE_MPU
))
1915 return env
->cp15
.c5_insn
;
1919 case 6: /* MMU Fault address. */
1920 if (arm_feature(env
, ARM_FEATURE_MPU
)) {
1923 return env
->cp15
.c6_region
[crm
];
1925 if (arm_feature(env
, ARM_FEATURE_OMAPCP
))
1929 return env
->cp15
.c6_data
;
1931 if (arm_feature(env
, ARM_FEATURE_V6
)) {
1932 /* Watchpoint Fault Adrress. */
1933 return 0; /* Not implemented. */
1935 /* Instruction Fault Adrress. */
1936 /* Arm9 doesn't have an IFAR, but implementing it anyway
1937 shouldn't do any harm. */
1938 return env
->cp15
.c6_insn
;
1941 if (arm_feature(env
, ARM_FEATURE_V6
)) {
1942 /* Instruction Fault Adrress. */
1943 return env
->cp15
.c6_insn
;
1951 case 7: /* Cache control. */
1952 if (crm
== 4 && op1
== 0 && op2
== 0) {
1953 return env
->cp15
.c7_par
;
1955 /* FIXME: Should only clear Z flag if destination is r15. */
1958 case 8: /* MMU TLB control. */
1962 case 0: /* Cache lockdown */
1964 case 0: /* L1 cache. */
1965 if (arm_feature(env
, ARM_FEATURE_OMAPCP
)) {
1970 return env
->cp15
.c9_data
;
1972 return env
->cp15
.c9_insn
;
1976 case 1: /* L2 cache */
1980 /* L2 Lockdown and Auxiliary control. */
1986 case 12: /* Performance monitor control */
1987 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
1991 case 0: /* performance monitor control register */
1992 return env
->cp15
.c9_pmcr
;
1993 case 1: /* count enable set */
1994 case 2: /* count enable clear */
1995 return env
->cp15
.c9_pmcnten
;
1996 case 3: /* overflow flag status */
1997 return env
->cp15
.c9_pmovsr
;
1998 case 4: /* software increment */
1999 case 5: /* event counter selection register */
2000 return 0; /* Unimplemented, RAZ/WI */
2004 case 13: /* Performance counters */
2005 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
2009 case 1: /* Event type select */
2010 return env
->cp15
.c9_pmxevtyper
;
2011 case 0: /* Cycle count register */
2012 case 2: /* Event count register */
2013 /* Unimplemented, so RAZ/WI */
2018 case 14: /* Performance monitor control */
2019 if (!arm_feature(env
, ARM_FEATURE_V7
)) {
2023 case 0: /* user enable */
2024 return env
->cp15
.c9_pmuserenr
;
2025 case 1: /* interrupt enable set */
2026 case 2: /* interrupt enable clear */
2027 return env
->cp15
.c9_pminten
;
2035 case 10: /* MMU TLB lockdown. */
2036 /* ??? TLB lockdown not implemented. */
2038 case 11: /* TCM DMA control. */
2039 case 12: /* Reserved. */
2041 case 13: /* Process ID. */
2044 return env
->cp15
.c13_fcse
;
2046 return env
->cp15
.c13_context
;
2050 case 14: /* Reserved. */
2052 case 15: /* Implementation specific. */
2053 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
2054 if (op2
== 0 && crm
== 1)
2055 return env
->cp15
.c15_cpar
;
2059 if (arm_feature(env
, ARM_FEATURE_OMAPCP
)) {
2063 case 1: /* Read TI925T configuration. */
2064 return env
->cp15
.c15_ticonfig
;
2065 case 2: /* Read I_max. */
2066 return env
->cp15
.c15_i_max
;
2067 case 3: /* Read I_min. */
2068 return env
->cp15
.c15_i_min
;
2069 case 4: /* Read thread-ID. */
2070 return env
->cp15
.c15_threadid
;
2071 case 8: /* TI925T_status */
2074 /* TODO: Peripheral port remap register:
2075 * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt
2076 * controller base address at $rn & ~0xfff and map size of
2077 * 0x200 << ($rn & 0xfff), when MMU is off. */
2083 /* ??? For debugging only. Should raise illegal instruction exception. */
2084 cpu_abort(env
, "Unimplemented cp15 register read (c%d, c%d, {%d, %d})\n",
2085 (insn
>> 16) & 0xf, crm
, op1
, op2
);
2089 void HELPER(set_r13_banked
)(CPUState
*env
, uint32_t mode
, uint32_t val
)
2091 if ((env
->uncached_cpsr
& CPSR_M
) == mode
) {
2092 env
->regs
[13] = val
;
2094 env
->banked_r13
[bank_number(mode
)] = val
;
2098 uint32_t HELPER(get_r13_banked
)(CPUState
*env
, uint32_t mode
)
2100 if ((env
->uncached_cpsr
& CPSR_M
) == mode
) {
2101 return env
->regs
[13];
2103 return env
->banked_r13
[bank_number(mode
)];
2107 uint32_t HELPER(v7m_mrs
)(CPUState
*env
, uint32_t reg
)
2111 return xpsr_read(env
) & 0xf8000000;
2113 return xpsr_read(env
) & 0xf80001ff;
2115 return xpsr_read(env
) & 0xff00fc00;
2117 return xpsr_read(env
) & 0xff00fdff;
2119 return xpsr_read(env
) & 0x000001ff;
2121 return xpsr_read(env
) & 0x0700fc00;
2123 return xpsr_read(env
) & 0x0700edff;
2125 return env
->v7m
.current_sp
? env
->v7m
.other_sp
: env
->regs
[13];
2127 return env
->v7m
.current_sp
? env
->regs
[13] : env
->v7m
.other_sp
;
2128 case 16: /* PRIMASK */
2129 return (env
->uncached_cpsr
& CPSR_I
) != 0;
2130 case 17: /* BASEPRI */
2131 case 18: /* BASEPRI_MAX */
2132 return env
->v7m
.basepri
;
2133 case 19: /* FAULTMASK */
2134 return (env
->uncached_cpsr
& CPSR_F
) != 0;
2135 case 20: /* CONTROL */
2136 return env
->v7m
.control
;
2138 /* ??? For debugging only. */
2139 cpu_abort(env
, "Unimplemented system register read (%d)\n", reg
);
2144 void HELPER(v7m_msr
)(CPUState
*env
, uint32_t reg
, uint32_t val
)
2148 xpsr_write(env
, val
, 0xf8000000);
2151 xpsr_write(env
, val
, 0xf8000000);
2154 xpsr_write(env
, val
, 0xfe00fc00);
2157 xpsr_write(env
, val
, 0xfe00fc00);
2160 /* IPSR bits are readonly. */
2163 xpsr_write(env
, val
, 0x0600fc00);
2166 xpsr_write(env
, val
, 0x0600fc00);
2169 if (env
->v7m
.current_sp
)
2170 env
->v7m
.other_sp
= val
;
2172 env
->regs
[13] = val
;
2175 if (env
->v7m
.current_sp
)
2176 env
->regs
[13] = val
;
2178 env
->v7m
.other_sp
= val
;
2180 case 16: /* PRIMASK */
2182 env
->uncached_cpsr
|= CPSR_I
;
2184 env
->uncached_cpsr
&= ~CPSR_I
;
2186 case 17: /* BASEPRI */
2187 env
->v7m
.basepri
= val
& 0xff;
2189 case 18: /* BASEPRI_MAX */
2191 if (val
!= 0 && (val
< env
->v7m
.basepri
|| env
->v7m
.basepri
== 0))
2192 env
->v7m
.basepri
= val
;
2194 case 19: /* FAULTMASK */
2196 env
->uncached_cpsr
|= CPSR_F
;
2198 env
->uncached_cpsr
&= ~CPSR_F
;
2200 case 20: /* CONTROL */
2201 env
->v7m
.control
= val
& 3;
2202 switch_v7m_sp(env
, (val
& 2) != 0);
2205 /* ??? For debugging only. */
2206 cpu_abort(env
, "Unimplemented system register write (%d)\n", reg
);
2211 void cpu_arm_set_cp_io(CPUARMState
*env
, int cpnum
,
2212 ARMReadCPFunc
*cp_read
, ARMWriteCPFunc
*cp_write
,
2215 if (cpnum
< 0 || cpnum
> 14) {
2216 cpu_abort(env
, "Bad coprocessor number: %i\n", cpnum
);
2220 env
->cp
[cpnum
].cp_read
= cp_read
;
2221 env
->cp
[cpnum
].cp_write
= cp_write
;
2222 env
->cp
[cpnum
].opaque
= opaque
;
2227 /* Note that signed overflow is undefined in C. The following routines are
2228 careful to use unsigned types where modulo arithmetic is required.
2229 Failure to do so _will_ break on newer gcc. */
2231 /* Signed saturating arithmetic. */
2233 /* Perform 16-bit signed saturating addition. */
2234 static inline uint16_t add16_sat(uint16_t a
, uint16_t b
)
2239 if (((res
^ a
) & 0x8000) && !((a
^ b
) & 0x8000)) {
2248 /* Perform 8-bit signed saturating addition. */
2249 static inline uint8_t add8_sat(uint8_t a
, uint8_t b
)
2254 if (((res
^ a
) & 0x80) && !((a
^ b
) & 0x80)) {
2263 /* Perform 16-bit signed saturating subtraction. */
2264 static inline uint16_t sub16_sat(uint16_t a
, uint16_t b
)
2269 if (((res
^ a
) & 0x8000) && ((a
^ b
) & 0x8000)) {
2278 /* Perform 8-bit signed saturating subtraction. */
2279 static inline uint8_t sub8_sat(uint8_t a
, uint8_t b
)
2284 if (((res
^ a
) & 0x80) && ((a
^ b
) & 0x80)) {
2293 #define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16);
2294 #define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16);
2295 #define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8);
2296 #define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8);
2299 #include "op_addsub.h"
2301 /* Unsigned saturating arithmetic. */
2302 static inline uint16_t add16_usat(uint16_t a
, uint16_t b
)
2311 static inline uint16_t sub16_usat(uint16_t a
, uint16_t b
)
2319 static inline uint8_t add8_usat(uint8_t a
, uint8_t b
)
2328 static inline uint8_t sub8_usat(uint8_t a
, uint8_t b
)
2336 #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16);
2337 #define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16);
2338 #define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8);
2339 #define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8);
2342 #include "op_addsub.h"
2344 /* Signed modulo arithmetic. */
2345 #define SARITH16(a, b, n, op) do { \
2347 sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \
2348 RESULT(sum, n, 16); \
2350 ge |= 3 << (n * 2); \
2353 #define SARITH8(a, b, n, op) do { \
2355 sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \
2356 RESULT(sum, n, 8); \
2362 #define ADD16(a, b, n) SARITH16(a, b, n, +)
2363 #define SUB16(a, b, n) SARITH16(a, b, n, -)
2364 #define ADD8(a, b, n) SARITH8(a, b, n, +)
2365 #define SUB8(a, b, n) SARITH8(a, b, n, -)
2369 #include "op_addsub.h"
2371 /* Unsigned modulo arithmetic. */
2372 #define ADD16(a, b, n) do { \
2374 sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \
2375 RESULT(sum, n, 16); \
2376 if ((sum >> 16) == 1) \
2377 ge |= 3 << (n * 2); \
2380 #define ADD8(a, b, n) do { \
2382 sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \
2383 RESULT(sum, n, 8); \
2384 if ((sum >> 8) == 1) \
2388 #define SUB16(a, b, n) do { \
2390 sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \
2391 RESULT(sum, n, 16); \
2392 if ((sum >> 16) == 0) \
2393 ge |= 3 << (n * 2); \
2396 #define SUB8(a, b, n) do { \
2398 sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \
2399 RESULT(sum, n, 8); \
2400 if ((sum >> 8) == 0) \
2407 #include "op_addsub.h"
2409 /* Halved signed arithmetic. */
2410 #define ADD16(a, b, n) \
2411 RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16)
2412 #define SUB16(a, b, n) \
2413 RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16)
2414 #define ADD8(a, b, n) \
2415 RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8)
2416 #define SUB8(a, b, n) \
2417 RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8)
2420 #include "op_addsub.h"
2422 /* Halved unsigned arithmetic. */
2423 #define ADD16(a, b, n) \
2424 RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16)
2425 #define SUB16(a, b, n) \
2426 RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16)
2427 #define ADD8(a, b, n) \
2428 RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8)
2429 #define SUB8(a, b, n) \
2430 RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8)
2433 #include "op_addsub.h"
2435 static inline uint8_t do_usad(uint8_t a
, uint8_t b
)
2443 /* Unsigned sum of absolute byte differences. */
2444 uint32_t HELPER(usad8
)(uint32_t a
, uint32_t b
)
2447 sum
= do_usad(a
, b
);
2448 sum
+= do_usad(a
>> 8, b
>> 8);
2449 sum
+= do_usad(a
>> 16, b
>>16);
2450 sum
+= do_usad(a
>> 24, b
>> 24);
2454 /* For ARMv6 SEL instruction. */
2455 uint32_t HELPER(sel_flags
)(uint32_t flags
, uint32_t a
, uint32_t b
)
2468 return (a
& mask
) | (b
& ~mask
);
2471 uint32_t HELPER(logicq_cc
)(uint64_t val
)
2473 return (val
>> 32) | (val
!= 0);
2476 /* VFP support. We follow the convention used for VFP instrunctions:
2477 Single precition routines have a "s" suffix, double precision a
2480 /* Convert host exception flags to vfp form. */
2481 static inline int vfp_exceptbits_from_host(int host_bits
)
2483 int target_bits
= 0;
2485 if (host_bits
& float_flag_invalid
)
2487 if (host_bits
& float_flag_divbyzero
)
2489 if (host_bits
& float_flag_overflow
)
2491 if (host_bits
& (float_flag_underflow
| float_flag_output_denormal
))
2493 if (host_bits
& float_flag_inexact
)
2494 target_bits
|= 0x10;
2495 if (host_bits
& float_flag_input_denormal
)
2496 target_bits
|= 0x80;
2500 uint32_t HELPER(vfp_get_fpscr
)(CPUState
*env
)
2505 fpscr
= (env
->vfp
.xregs
[ARM_VFP_FPSCR
] & 0xffc8ffff)
2506 | (env
->vfp
.vec_len
<< 16)
2507 | (env
->vfp
.vec_stride
<< 20);
2508 i
= get_float_exception_flags(&env
->vfp
.fp_status
);
2509 i
|= get_float_exception_flags(&env
->vfp
.standard_fp_status
);
2510 fpscr
|= vfp_exceptbits_from_host(i
);
2514 uint32_t vfp_get_fpscr(CPUState
*env
)
2516 return HELPER(vfp_get_fpscr
)(env
);
2519 /* Convert vfp exception flags to target form. */
2520 static inline int vfp_exceptbits_to_host(int target_bits
)
2524 if (target_bits
& 1)
2525 host_bits
|= float_flag_invalid
;
2526 if (target_bits
& 2)
2527 host_bits
|= float_flag_divbyzero
;
2528 if (target_bits
& 4)
2529 host_bits
|= float_flag_overflow
;
2530 if (target_bits
& 8)
2531 host_bits
|= float_flag_underflow
;
2532 if (target_bits
& 0x10)
2533 host_bits
|= float_flag_inexact
;
2534 if (target_bits
& 0x80)
2535 host_bits
|= float_flag_input_denormal
;
2539 void HELPER(vfp_set_fpscr
)(CPUState
*env
, uint32_t val
)
2544 changed
= env
->vfp
.xregs
[ARM_VFP_FPSCR
];
2545 env
->vfp
.xregs
[ARM_VFP_FPSCR
] = (val
& 0xffc8ffff);
2546 env
->vfp
.vec_len
= (val
>> 16) & 7;
2547 env
->vfp
.vec_stride
= (val
>> 20) & 3;
2550 if (changed
& (3 << 22)) {
2551 i
= (val
>> 22) & 3;
2554 i
= float_round_nearest_even
;
2560 i
= float_round_down
;
2563 i
= float_round_to_zero
;
2566 set_float_rounding_mode(i
, &env
->vfp
.fp_status
);
2568 if (changed
& (1 << 24)) {
2569 set_flush_to_zero((val
& (1 << 24)) != 0, &env
->vfp
.fp_status
);
2570 set_flush_inputs_to_zero((val
& (1 << 24)) != 0, &env
->vfp
.fp_status
);
2572 if (changed
& (1 << 25))
2573 set_default_nan_mode((val
& (1 << 25)) != 0, &env
->vfp
.fp_status
);
2575 i
= vfp_exceptbits_to_host(val
);
2576 set_float_exception_flags(i
, &env
->vfp
.fp_status
);
2577 set_float_exception_flags(0, &env
->vfp
.standard_fp_status
);
2580 void vfp_set_fpscr(CPUState
*env
, uint32_t val
)
2582 HELPER(vfp_set_fpscr
)(env
, val
);
2585 #define VFP_HELPER(name, p) HELPER(glue(glue(vfp_,name),p))
2587 #define VFP_BINOP(name) \
2588 float32 VFP_HELPER(name, s)(float32 a, float32 b, void *fpstp) \
2590 float_status *fpst = fpstp; \
2591 return float32_ ## name(a, b, fpst); \
2593 float64 VFP_HELPER(name, d)(float64 a, float64 b, void *fpstp) \
2595 float_status *fpst = fpstp; \
2596 return float64_ ## name(a, b, fpst); \
2604 float32
VFP_HELPER(neg
, s
)(float32 a
)
2606 return float32_chs(a
);
2609 float64
VFP_HELPER(neg
, d
)(float64 a
)
2611 return float64_chs(a
);
2614 float32
VFP_HELPER(abs
, s
)(float32 a
)
2616 return float32_abs(a
);
2619 float64
VFP_HELPER(abs
, d
)(float64 a
)
2621 return float64_abs(a
);
2624 float32
VFP_HELPER(sqrt
, s
)(float32 a
, CPUState
*env
)
2626 return float32_sqrt(a
, &env
->vfp
.fp_status
);
2629 float64
VFP_HELPER(sqrt
, d
)(float64 a
, CPUState
*env
)
2631 return float64_sqrt(a
, &env
->vfp
.fp_status
);
2634 /* XXX: check quiet/signaling case */
2635 #define DO_VFP_cmp(p, type) \
2636 void VFP_HELPER(cmp, p)(type a, type b, CPUState *env) \
2639 switch(type ## _compare_quiet(a, b, &env->vfp.fp_status)) { \
2640 case 0: flags = 0x6; break; \
2641 case -1: flags = 0x8; break; \
2642 case 1: flags = 0x2; break; \
2643 default: case 2: flags = 0x3; break; \
2645 env->vfp.xregs[ARM_VFP_FPSCR] = (flags << 28) \
2646 | (env->vfp.xregs[ARM_VFP_FPSCR] & 0x0fffffff); \
2648 void VFP_HELPER(cmpe, p)(type a, type b, CPUState *env) \
2651 switch(type ## _compare(a, b, &env->vfp.fp_status)) { \
2652 case 0: flags = 0x6; break; \
2653 case -1: flags = 0x8; break; \
2654 case 1: flags = 0x2; break; \
2655 default: case 2: flags = 0x3; break; \
2657 env->vfp.xregs[ARM_VFP_FPSCR] = (flags << 28) \
2658 | (env->vfp.xregs[ARM_VFP_FPSCR] & 0x0fffffff); \
2660 DO_VFP_cmp(s
, float32
)
2661 DO_VFP_cmp(d
, float64
)
2664 /* Integer to float and float to integer conversions */
2666 #define CONV_ITOF(name, fsz, sign) \
2667 float##fsz HELPER(name)(uint32_t x, void *fpstp) \
2669 float_status *fpst = fpstp; \
2670 return sign##int32_to_##float##fsz(x, fpst); \
2673 #define CONV_FTOI(name, fsz, sign, round) \
2674 uint32_t HELPER(name)(float##fsz x, void *fpstp) \
2676 float_status *fpst = fpstp; \
2677 if (float##fsz##_is_any_nan(x)) { \
2678 float_raise(float_flag_invalid, fpst); \
2681 return float##fsz##_to_##sign##int32##round(x, fpst); \
2684 #define FLOAT_CONVS(name, p, fsz, sign) \
2685 CONV_ITOF(vfp_##name##to##p, fsz, sign) \
2686 CONV_FTOI(vfp_to##name##p, fsz, sign, ) \
2687 CONV_FTOI(vfp_to##name##z##p, fsz, sign, _round_to_zero)
2689 FLOAT_CONVS(si
, s
, 32, )
2690 FLOAT_CONVS(si
, d
, 64, )
2691 FLOAT_CONVS(ui
, s
, 32, u
)
2692 FLOAT_CONVS(ui
, d
, 64, u
)
2698 /* floating point conversion */
2699 float64
VFP_HELPER(fcvtd
, s
)(float32 x
, CPUState
*env
)
2701 float64 r
= float32_to_float64(x
, &env
->vfp
.fp_status
);
2702 /* ARM requires that S<->D conversion of any kind of NaN generates
2703 * a quiet NaN by forcing the most significant frac bit to 1.
2705 return float64_maybe_silence_nan(r
);
2708 float32
VFP_HELPER(fcvts
, d
)(float64 x
, CPUState
*env
)
2710 float32 r
= float64_to_float32(x
, &env
->vfp
.fp_status
);
2711 /* ARM requires that S<->D conversion of any kind of NaN generates
2712 * a quiet NaN by forcing the most significant frac bit to 1.
2714 return float32_maybe_silence_nan(r
);
2717 /* VFP3 fixed point conversion. */
2718 #define VFP_CONV_FIX(name, p, fsz, itype, sign) \
2719 float##fsz HELPER(vfp_##name##to##p)(uint##fsz##_t x, uint32_t shift, \
2722 float_status *fpst = fpstp; \
2724 tmp = sign##int32_to_##float##fsz((itype##_t)x, fpst); \
2725 return float##fsz##_scalbn(tmp, -(int)shift, fpst); \
2727 uint##fsz##_t HELPER(vfp_to##name##p)(float##fsz x, uint32_t shift, \
2730 float_status *fpst = fpstp; \
2732 if (float##fsz##_is_any_nan(x)) { \
2733 float_raise(float_flag_invalid, fpst); \
2736 tmp = float##fsz##_scalbn(x, shift, fpst); \
2737 return float##fsz##_to_##itype##_round_to_zero(tmp, fpst); \
2740 VFP_CONV_FIX(sh
, d
, 64, int16
, )
2741 VFP_CONV_FIX(sl
, d
, 64, int32
, )
2742 VFP_CONV_FIX(uh
, d
, 64, uint16
, u
)
2743 VFP_CONV_FIX(ul
, d
, 64, uint32
, u
)
2744 VFP_CONV_FIX(sh
, s
, 32, int16
, )
2745 VFP_CONV_FIX(sl
, s
, 32, int32
, )
2746 VFP_CONV_FIX(uh
, s
, 32, uint16
, u
)
2747 VFP_CONV_FIX(ul
, s
, 32, uint32
, u
)
2750 /* Half precision conversions. */
2751 static float32
do_fcvt_f16_to_f32(uint32_t a
, CPUState
*env
, float_status
*s
)
2753 int ieee
= (env
->vfp
.xregs
[ARM_VFP_FPSCR
] & (1 << 26)) == 0;
2754 float32 r
= float16_to_float32(make_float16(a
), ieee
, s
);
2756 return float32_maybe_silence_nan(r
);
2761 static uint32_t do_fcvt_f32_to_f16(float32 a
, CPUState
*env
, float_status
*s
)
2763 int ieee
= (env
->vfp
.xregs
[ARM_VFP_FPSCR
] & (1 << 26)) == 0;
2764 float16 r
= float32_to_float16(a
, ieee
, s
);
2766 r
= float16_maybe_silence_nan(r
);
2768 return float16_val(r
);
2771 float32
HELPER(neon_fcvt_f16_to_f32
)(uint32_t a
, CPUState
*env
)
2773 return do_fcvt_f16_to_f32(a
, env
, &env
->vfp
.standard_fp_status
);
2776 uint32_t HELPER(neon_fcvt_f32_to_f16
)(float32 a
, CPUState
*env
)
2778 return do_fcvt_f32_to_f16(a
, env
, &env
->vfp
.standard_fp_status
);
2781 float32
HELPER(vfp_fcvt_f16_to_f32
)(uint32_t a
, CPUState
*env
)
2783 return do_fcvt_f16_to_f32(a
, env
, &env
->vfp
.fp_status
);
2786 uint32_t HELPER(vfp_fcvt_f32_to_f16
)(float32 a
, CPUState
*env
)
2788 return do_fcvt_f32_to_f16(a
, env
, &env
->vfp
.fp_status
);
2791 #define float32_two make_float32(0x40000000)
2792 #define float32_three make_float32(0x40400000)
2793 #define float32_one_point_five make_float32(0x3fc00000)
2795 float32
HELPER(recps_f32
)(float32 a
, float32 b
, CPUState
*env
)
2797 float_status
*s
= &env
->vfp
.standard_fp_status
;
2798 if ((float32_is_infinity(a
) && float32_is_zero_or_denormal(b
)) ||
2799 (float32_is_infinity(b
) && float32_is_zero_or_denormal(a
))) {
2800 if (!(float32_is_zero(a
) || float32_is_zero(b
))) {
2801 float_raise(float_flag_input_denormal
, s
);
2805 return float32_sub(float32_two
, float32_mul(a
, b
, s
), s
);
2808 float32
HELPER(rsqrts_f32
)(float32 a
, float32 b
, CPUState
*env
)
2810 float_status
*s
= &env
->vfp
.standard_fp_status
;
2812 if ((float32_is_infinity(a
) && float32_is_zero_or_denormal(b
)) ||
2813 (float32_is_infinity(b
) && float32_is_zero_or_denormal(a
))) {
2814 if (!(float32_is_zero(a
) || float32_is_zero(b
))) {
2815 float_raise(float_flag_input_denormal
, s
);
2817 return float32_one_point_five
;
2819 product
= float32_mul(a
, b
, s
);
2820 return float32_div(float32_sub(float32_three
, product
, s
), float32_two
, s
);
2825 /* Constants 256 and 512 are used in some helpers; we avoid relying on
2826 * int->float conversions at run-time. */
2827 #define float64_256 make_float64(0x4070000000000000LL)
2828 #define float64_512 make_float64(0x4080000000000000LL)
2830 /* The algorithm that must be used to calculate the estimate
2831 * is specified by the ARM ARM.
2833 static float64
recip_estimate(float64 a
, CPUState
*env
)
2835 /* These calculations mustn't set any fp exception flags,
2836 * so we use a local copy of the fp_status.
2838 float_status dummy_status
= env
->vfp
.standard_fp_status
;
2839 float_status
*s
= &dummy_status
;
2840 /* q = (int)(a * 512.0) */
2841 float64 q
= float64_mul(float64_512
, a
, s
);
2842 int64_t q_int
= float64_to_int64_round_to_zero(q
, s
);
2844 /* r = 1.0 / (((double)q + 0.5) / 512.0) */
2845 q
= int64_to_float64(q_int
, s
);
2846 q
= float64_add(q
, float64_half
, s
);
2847 q
= float64_div(q
, float64_512
, s
);
2848 q
= float64_div(float64_one
, q
, s
);
2850 /* s = (int)(256.0 * r + 0.5) */
2851 q
= float64_mul(q
, float64_256
, s
);
2852 q
= float64_add(q
, float64_half
, s
);
2853 q_int
= float64_to_int64_round_to_zero(q
, s
);
2855 /* return (double)s / 256.0 */
2856 return float64_div(int64_to_float64(q_int
, s
), float64_256
, s
);
2859 float32
HELPER(recpe_f32
)(float32 a
, CPUState
*env
)
2861 float_status
*s
= &env
->vfp
.standard_fp_status
;
2863 uint32_t val32
= float32_val(a
);
2866 int a_exp
= (val32
& 0x7f800000) >> 23;
2867 int sign
= val32
& 0x80000000;
2869 if (float32_is_any_nan(a
)) {
2870 if (float32_is_signaling_nan(a
)) {
2871 float_raise(float_flag_invalid
, s
);
2873 return float32_default_nan
;
2874 } else if (float32_is_infinity(a
)) {
2875 return float32_set_sign(float32_zero
, float32_is_neg(a
));
2876 } else if (float32_is_zero_or_denormal(a
)) {
2877 if (!float32_is_zero(a
)) {
2878 float_raise(float_flag_input_denormal
, s
);
2880 float_raise(float_flag_divbyzero
, s
);
2881 return float32_set_sign(float32_infinity
, float32_is_neg(a
));
2882 } else if (a_exp
>= 253) {
2883 float_raise(float_flag_underflow
, s
);
2884 return float32_set_sign(float32_zero
, float32_is_neg(a
));
2887 f64
= make_float64((0x3feULL
<< 52)
2888 | ((int64_t)(val32
& 0x7fffff) << 29));
2890 result_exp
= 253 - a_exp
;
2892 f64
= recip_estimate(f64
, env
);
2895 | ((result_exp
& 0xff) << 23)
2896 | ((float64_val(f64
) >> 29) & 0x7fffff);
2897 return make_float32(val32
);
2900 /* The algorithm that must be used to calculate the estimate
2901 * is specified by the ARM ARM.
2903 static float64
recip_sqrt_estimate(float64 a
, CPUState
*env
)
2905 /* These calculations mustn't set any fp exception flags,
2906 * so we use a local copy of the fp_status.
2908 float_status dummy_status
= env
->vfp
.standard_fp_status
;
2909 float_status
*s
= &dummy_status
;
2913 if (float64_lt(a
, float64_half
, s
)) {
2914 /* range 0.25 <= a < 0.5 */
2916 /* a in units of 1/512 rounded down */
2917 /* q0 = (int)(a * 512.0); */
2918 q
= float64_mul(float64_512
, a
, s
);
2919 q_int
= float64_to_int64_round_to_zero(q
, s
);
2921 /* reciprocal root r */
2922 /* r = 1.0 / sqrt(((double)q0 + 0.5) / 512.0); */
2923 q
= int64_to_float64(q_int
, s
);
2924 q
= float64_add(q
, float64_half
, s
);
2925 q
= float64_div(q
, float64_512
, s
);
2926 q
= float64_sqrt(q
, s
);
2927 q
= float64_div(float64_one
, q
, s
);
2929 /* range 0.5 <= a < 1.0 */
2931 /* a in units of 1/256 rounded down */
2932 /* q1 = (int)(a * 256.0); */
2933 q
= float64_mul(float64_256
, a
, s
);
2934 int64_t q_int
= float64_to_int64_round_to_zero(q
, s
);
2936 /* reciprocal root r */
2937 /* r = 1.0 /sqrt(((double)q1 + 0.5) / 256); */
2938 q
= int64_to_float64(q_int
, s
);
2939 q
= float64_add(q
, float64_half
, s
);
2940 q
= float64_div(q
, float64_256
, s
);
2941 q
= float64_sqrt(q
, s
);
2942 q
= float64_div(float64_one
, q
, s
);
2944 /* r in units of 1/256 rounded to nearest */
2945 /* s = (int)(256.0 * r + 0.5); */
2947 q
= float64_mul(q
, float64_256
,s
);
2948 q
= float64_add(q
, float64_half
, s
);
2949 q_int
= float64_to_int64_round_to_zero(q
, s
);
2951 /* return (double)s / 256.0;*/
2952 return float64_div(int64_to_float64(q_int
, s
), float64_256
, s
);
2955 float32
HELPER(rsqrte_f32
)(float32 a
, CPUState
*env
)
2957 float_status
*s
= &env
->vfp
.standard_fp_status
;
2963 val
= float32_val(a
);
2965 if (float32_is_any_nan(a
)) {
2966 if (float32_is_signaling_nan(a
)) {
2967 float_raise(float_flag_invalid
, s
);
2969 return float32_default_nan
;
2970 } else if (float32_is_zero_or_denormal(a
)) {
2971 if (!float32_is_zero(a
)) {
2972 float_raise(float_flag_input_denormal
, s
);
2974 float_raise(float_flag_divbyzero
, s
);
2975 return float32_set_sign(float32_infinity
, float32_is_neg(a
));
2976 } else if (float32_is_neg(a
)) {
2977 float_raise(float_flag_invalid
, s
);
2978 return float32_default_nan
;
2979 } else if (float32_is_infinity(a
)) {
2980 return float32_zero
;
2983 /* Normalize to a double-precision value between 0.25 and 1.0,
2984 * preserving the parity of the exponent. */
2985 if ((val
& 0x800000) == 0) {
2986 f64
= make_float64(((uint64_t)(val
& 0x80000000) << 32)
2988 | ((uint64_t)(val
& 0x7fffff) << 29));
2990 f64
= make_float64(((uint64_t)(val
& 0x80000000) << 32)
2992 | ((uint64_t)(val
& 0x7fffff) << 29));
2995 result_exp
= (380 - ((val
& 0x7f800000) >> 23)) / 2;
2997 f64
= recip_sqrt_estimate(f64
, env
);
2999 val64
= float64_val(f64
);
3001 val
= ((val64
>> 63) & 0x80000000)
3002 | ((result_exp
& 0xff) << 23)
3003 | ((val64
>> 29) & 0x7fffff);
3004 return make_float32(val
);
3007 uint32_t HELPER(recpe_u32
)(uint32_t a
, CPUState
*env
)
3011 if ((a
& 0x80000000) == 0) {
3015 f64
= make_float64((0x3feULL
<< 52)
3016 | ((int64_t)(a
& 0x7fffffff) << 21));
3018 f64
= recip_estimate (f64
, env
);
3020 return 0x80000000 | ((float64_val(f64
) >> 21) & 0x7fffffff);
3023 uint32_t HELPER(rsqrte_u32
)(uint32_t a
, CPUState
*env
)
3027 if ((a
& 0xc0000000) == 0) {
3031 if (a
& 0x80000000) {
3032 f64
= make_float64((0x3feULL
<< 52)
3033 | ((uint64_t)(a
& 0x7fffffff) << 21));
3034 } else { /* bits 31-30 == '01' */
3035 f64
= make_float64((0x3fdULL
<< 52)
3036 | ((uint64_t)(a
& 0x3fffffff) << 22));
3039 f64
= recip_sqrt_estimate(f64
, env
);
3041 return 0x80000000 | ((float64_val(f64
) >> 21) & 0x7fffffff);
3044 void HELPER(set_teecr
)(CPUState
*env
, uint32_t val
)
3047 if (env
->teecr
!= val
) {