WIP Ewald 2D in 3D general z != 0 constant factors.

[qpms.git] / qpms / ewald.h

/*! \file ewald.h
 * \brief Lattice sums of spherical waves.
 *
 * Implementation of two-dimensional lattice sum in three dimensions
 * according to:
 * - [1] C.M. Linton, I. Thompson
 *     Journal of Computational Physics 228 (2009) 1815–1829
 * - [2] C.M.Linton
 *     SIAM Review Vol 52, No. 4, pp. 630–674
 *
 * N.B.!!! currently, the long-range parts are calculated 
 * not according to [1,(4.5)], but rather
 * according to the spherical-harmonic-normalisation-independent 
 * formulation in my notes notes/ewald.lyx.
 * Both parts of lattice sums are then calculated with 
 * the \f$ P_n^{|m|} e^{im\phi} \f$
 * (N.B. or \f$ P_n^{|m|} e^{imf} (-1)^m \f$ for negative m) 
 * substituted in place  of  \f$ Y_n^m \f$ 
 * (this is quite a weird normalisation especially 
 * for negative \f$ |m| \f$, but it is consistent
 * with the current implementation of the translation coefficients in
 * @ref translations.c;
 * in the long run, it might make more sense to replace it everywhere with normalised
 * Legendre polynomials).
 */

#ifndef EWALD_H
#define EWALD_H
#include <gsl/gsl_sf_result.h>
#include <stdlib.h>
#include <gsl/gsl_sf_legendre.h>
#include <gsl/gsl_errno.h>
#include <math.h> // for inlined lilgamma
#include <complex.h>
#include "qpms_types.h"
#include "lattices.h"


typedef enum {
        QPMS_EWALD_LONG_RANGE = 1,
        QPMS_EWALD_SHORT_RANGE = 2,
        QPMS_EWALD_0TERM = 4,
        QPMS_EWALD_FULL = QPMS_EWALD_LONG_RANGE | QPMS_EWALD_SHORT_RANGE | QPMS_EWALD_0TERM,
} qpms_ewald_part;


/// Use this handler to ignore underflows of incomplete gamma.
gsl_error_handler_t IgnoreUnderflowsGSLErrorHandler;


/// Object holding the Ewald sum constant factors.
/**
 * Used internally by qpms_translation_calculator_t. 
 * Initialised by qpms_ewald3_constants_init() and freed by qpms_ewald3_constants_free().
 */
typedef struct qpms_ewald3_constants_t { 
        qpms_l_t lMax;
        qpms_y_t nelem_sc;
        /// The values of maximum \a j's in the long-range part summation, `[(l-|m|/2)]`.
        qpms_l_t *s1_jMaxes;
        /// The constant factors for the long range part of a 2D Ewald sum.
        complex double **s1_constfacs; // indices [y][j] where j is same as in [1, (4.5)]
        /* These are the actual numbers now: (in the EWALD32_CONSTANTS_AGNOSTIC version)
         * for m + n EVEN:
         *
         * s1_constfacs[y(m,n)][j] = 
         *
         *   -2 * I**(n+1) * sqrt(π) * ((n-m)/2)! * ((n+m)/2)! * (-1)**j 
         *   -----------------------------------------------------------
         *              j! * ((n-m)/2 - j)! * ((n+m)/2 + j)!
         *
         * for m + n ODD:
         *
         * s1_constfacs[y(m,n)][j] = 0
         */
        complex double *s1_constfacs_base; ///< Internal pointer holding memory for the 2D Ewald sum constant factors.
        // similarly for the 1D z-axis aligned case; now the indices are [n][j] (as m == 0)
        /// The constant factors for the long range part of a 1D Ewald sum along the \a z axis.
        /** If the summation points lie along a different direction, use the formula for
         * 2D sum with additional factor of 
         * \f$ \sqrt{pi} \kappa \gamma(\abs{\vect{k}+\vect{K}}/\kappa) \f$.
         */

        ///=============== NEW GENERATION GENERAL 2D-IN-3D, including z != 0 =========================
        
        // TODO indexing mechanisms
        
        /// The constant factors for the long range part of a 2D Ewald sum.
        complex double **S1_constfacs; // indices [y][j] where j is same as in [1, (4.5)]
        /* These are the actual numbers now: (in the EWALD32_CONSTANTS_AGNOSTIC version)
         * for m + n EVEN:
         *
         * s1_constfacs[y(m,n)][x(j,s)] = 
         *
         *   -2 * I**(n+1) * sqrt(π) * ((n-m)/2)! * ((n+m)/2)! * (-1)**j /   j    \
         *   ----------------------------------------------------------- |        |
         *              j! * ((n - m - s)/2)! * ((n + m - s)/2)!         \ 2j - s /
         *
         * for m + n ODD:
         *
         * s1_constfacs[y(m,n)][j] = 0
         */
        complex double *S1_constfacs_base; ///< Internal pointer holding memory for the 2D Ewald sum constant factors.
        /// The constant factors for the long range part of a 1D Ewald sum along the \a z axis.
        /** If the summation points lie along a different direction, use the formula for
         * 2D sum with additional factor of 
         * \f$ \sqrt{pi} \kappa \gamma(\abs{\vect{k}+\vect{K}}/\kappa) \f$.
         */


        complex double **s1_constfacs_1Dz; 
        /* These are the actual numbers now:
         * s1_constfacs_1Dz[n][j] =
         *   
         *     -I**(n+1) (-1)**j * n!
         *   --------------------------
         *   j! * 2**(2*j) * (n - 2*j)!
         */
        complex double *s1_constfacs_1Dz_base; ///<Internal pointer holding memory for the 1D Ewald sum constant factors.

        double *legendre0; /* now with GSL_SF_LEGENDRE_NONE normalisation, because this is what is
                            * what the multipliers from translations.c count with.
                            */
        double *legendre_plus1; // needed? TODO; in any case, nonzero only for m=0
        double *legendre_minus1; // needed? TODO; in any case, nonzero only for m=0
        gsl_sf_legendre_t legendre_normconv;
        int legendre_csphase;       /* 1 or -1; csphase of the Legendre polynomials saved in legendre0 etc.
                                        This is because I dont't actually consider this fixed in
                                        translations.c */

} qpms_ewald3_constants_t;

/// Constructor for qpms_ewald3_constants_t.
qpms_ewald3_constants_t *qpms_ewald3_constants_init(qpms_l_t lMax, int csphase);
/// Destructor for qpms_ewald3_constants_t.
void qpms_ewald3_constants_free(qpms_ewald3_constants_t *);


/// Structure for holding complex-valued result of computation and an error estimate.
/** Similar to gsl_sf_result, but with complex val. */
typedef struct qpms_csf_result { 
  complex double val; ///< Calculation result.
  double err; ///< Error estimate.
} qpms_csf_result;


// [1, (A.9)]
static inline complex double lilgamma(double t) {
  t = fabs(t);
  if (t >= 1) 
    return sqrt(t*t - 1);
  else
    return -I * sqrt(1 - t*t);
}

// [1, (A.8)], complex version of lilgamma()
static inline complex double clilgamma(complex double z) {
        complex double a1 = z - 1, a2 = z + 1;
        // ensure  -pi/2 < arg(z + 1) < 3*pi/2
        if (creal(a2) < 0 && cimag(a2) <= 0) 
                a2 = -csqrt(a2);
        else 
                a2 = csqrt(a2);
        // ensure -3*pi/2 < arg(z - 1) < pi/2
        if (creal(a1) < 0 && cimag(a1) >= 0)
                a1 = -csqrt(a1);
        else
                a1 = csqrt(a1);
        return a1 * a2;
}

/// Incomplete Gamma function as a series.
/** DLMF 8.7.3 (latter expression) for complex second argument.
 *
 * The principal value is calculated. On the negative real axis
 * (where the function has branch cut), the sign of the imaginary
 * part is what matters (even if it is zero). Therefore one
 * can have
 * `cx_gamma_inc_series_e(a, z1) != cx_gamma_inc_series_e(a, z2)`
 * even if `z1 == z2`, because `-0 == 0` according to IEEE 754.
 * The side of the branch cut can be determined using `signbit(creal(z))`.
 */
int cx_gamma_inc_series_e(double a, complex double z, qpms_csf_result * result);

/// Incomplete Gamma function as continued fractions.
/** 
 * The principal value is calculated. On the negative real axis
 * (where the function has branch cut), the sign of the imaginary
 * part is what matters (even if it is zero). Therefore one
 * can have
 * `cx_gamma_inc_CF_e(a, z1) != cx_gamma_inc_CF_e(a, z2)`
 * even if `z1 == z2`, because `-0 == 0` according to IEEE 754.
 * The side of the branch cut can be determined using `signbit(creal(z))`.
 */
int cx_gamma_inc_CF_e(double a, complex double z, qpms_csf_result * result);

/// Incomplete gamma for complex second argument.
/** 
 * If x is (almost) real, it just uses gsl_sf_gamma_inc_e(). 
 * 
 * On the negative real axis
 * (where the function has branch cut), the sign of the imaginary
 * part is what matters (even if it is zero). Therefore one
 * can have
 * `complex_gamma_inc_e(a, z1, m) != complex_gamma_inc_e(a, z2, m)`
 * even if `z1 == z2`, because `-0 == 0` according to IEEE 754.
 * The side of the branch cut can be determined using `signbit(creal(z))`.
 *
 * Another than principal branch can be selected using non-zero \a m 
 * argument.
 */
int complex_gamma_inc_e(double a, complex double x,
        /// Branch index.
        /** If zero, the principal value is calculated.  
         * Other branches might be chosen using non-zero \a m.
         * In such case, the returned value corresponds to \f[
         * \Gamma(a,ze^{2\pi mi})=e^{2\pi mia} \Gamma(a,z) 
         *   + (1-e^{2\pi mia}) \Gamma(a).
         * \f]
         *
         * If \a a is non-positive integer, the limiting value should
         * be used, but this is not yet implemented!
         */
        int m,
        qpms_csf_result *result);

/// Exponential integral for complex second argument.
/** If x is (almost) positive real, it just uses gsl_sf_expint_En_e(). */
int complex_expint_n_e(int n, complex double x, qpms_csf_result *result);


/// Hypergeometric 2F2, used to calculate some errors.
int hyperg_2F2_series(double a, double b, double c, double d, double x, 
                gsl_sf_result *result);

#if 0
// The integral from (4.6); maybe should be static and not here.
int ewald32_sr_integral(double r, double k, double n, double eta, double *result, double *err, gsl_integration_workspace *workspace);
#endif

/// The Delta_n factor from [Kambe II], Appendix 3, used in 2D-in-3D long range sum.
/** \f[ \Delta_n = \int_n^\infty t^{-1/2 - n} \exp(-t + z^2/(4t))\ud t \f]
 *
 * \bug The current choice of method, based purely on the value of \a z, might be
 * unsuitable especially for big values of \a maxn.
 * 
 */
void ewald3_2_sigma_long_Delta(complex double *target, double *target_err, int maxn, complex double x,
               int xbranch, complex double z);

/// The Delta_n factor from [Kambe II], Appendix 3, used in 2D-in-3D long range sum.
/** This function always uses Kambe's (corrected) recurrent formula.
 * For production, use ewald3_2_sigma_long_Delta() instead.
 */
void ewald3_2_sigma_long_Delta_recurrent(complex double *target, double *target_err, int maxn, complex double x,
               int xbranch, complex double z);

/// The Delta_n factor from [Kambe II], Appendix 3, used in 2D-in-3D long range sum.
/** This function always uses Taylor expansion in \a z.
 * For production, use ewald3_2_sigma_long_Delta() instead.
 *
 * \bug The error estimate seems to be wrong (too small) at least in some cases: try
 * parameters maxn = 40, z = 0.5, x = -3. This might be related to the exponential growth
 * of the error.
 */
void ewald3_2_sigma_long_Delta_series(complex double *target, double *target_err, int maxn, complex double x,
               int xbranch, complex double z);

// General functions acc. to [2], sec. 4.6 – currently valid for 2D and 1D lattices in 3D space

/// The Ewald sum "self-interaction" term that appears in the lattice sums with zero (direct-space) Bravais lattice displacement.
int ewald3_sigma0(complex double *result, ///< Pointer to save the result (single complex double).
                double *err, ///< Pointer to save the result error estimate (single double).
                const qpms_ewald3_constants_t *c, ///< Constant factors structure initialised by qpms_ewald3_constants_init().
                double eta, ///< Ewald parameter.
                complex double wavenumber ///< Wavenumber of the background medium.
);

/// Short-range part of outgoing scalar spherical wavefunctions' lattice sum \f$ \sigma_{l,m}^\mathrm{S}(\vect k,\vect s)\f$.
int ewald3_sigma_short(
                complex double *target_sigmasr_y, ///< Target array for \f$ \sigma_{l,m}^\mathrm{S} \f$, must be `c->nelem_sc` long.
                double *target_sigmasr_y_err, ///< Target array for error estimates, must be `c->nelem_sc` long or `NULL`.
                const qpms_ewald3_constants_t *c, ///< Constant factors structure initialised by qpms_ewald3_constants_init().
                double eta, ///< Ewald parameter.
                complex double wavenumber, ///< Wavenumber of the background medium. 
                /// Lattice dimensionality. 
                /** Ignored apart from asserts and possible optimisations, as the SR formula stays the same. */
                LatticeDimensionality latdim,
                /// Lattice point generator for the direct Bravais lattice.
                /** There is a possibility that the whole PGen is not consumed
                 *  (this might happen if the summand start to be consistently smaller
                 *  than the (partial) sums * DBL_EPSILON.
                 *  In such case, it is the responsibility of the caller to deallocate
                 *  the generator.
                 */
                PGen *pgen_R,
                /// Indicates whether pgen_R already generates shifted points.
                /** If false, the behaviour corresponds to the old ewald32_sigma_short_points_and_shift(),
                 * so the function assumes that the generated points correspond to the unshifted Bravais lattice,
                 * and adds particle_shift to the generated points before calculations.
                 * If true, it assumes that they are already shifted (if calculating interaction between
                 * different particles in the unit cell).
                 */
                bool pgen_generates_shifted_points,
                /// Wave vector \f$\vect k\f$.
                cart3_t k,
                /// Lattice offset \f$\vect s\f$ wrt. the Bravais lattice.
                cart3_t particle_shift
                );

/// Long-range part of outgoing scalar spherical wavefunctions' lattice sum \f$ \sigma_{l,m}^\mathrm{L}(\vect k,\vect s)\f$.
int ewald3_sigma_long( // calls ewald3_21_sigma_long or ewald3_3_sigma_long, depending on latdim
                complex double *target_sigmalr_y, ///< Target array for \f$ \sigma_{l,m}^\mathrm{L} \f$, must be `c->nelem_sc` long.
                double *target_sigmalr_y_err, ///< Target array for error estimates, must be `c->nelem_sc` long or `NULL`.
                const qpms_ewald3_constants_t *c, ///< Constant factors structure initialised by qpms_ewald3_constants_init().
                double eta, ///< Ewald parameter.
                complex double wavenumber, ///< Wavenumber of the background medium. 
                double unitcell_volume, ///< Volume of the (direct lattice) unit cell (with dimension corresponding to the lattice dimensionality).
                /// Lattice dimensionality. 
                LatticeDimensionality latdim,
                /// Lattice point generator for the reciprocal lattice.
                /** There is a possibility that the whole PGen is not consumed
                 *  (this might happen if the summand start to be consistently smaller
                 *  than the (partial) sums * DBL_EPSILON.
                 *  In such case, it is the responsibility of the caller to deallocate
                 *  the generator.
                 */
                PGen *pgen_K, 
                /// Indicates whether pgen_K already generates shifted points.
                /** If false, the behaviour corresponds to the old ewald32_sigma_long_points_and_shift(),
                 * so the function assumes that the generated points correspond to the unshifted reciprocal Bravais lattice,
                 * and adds beta to the generated points before calculations.
                 * If true, it assumes that they are already shifted.
                 */
                bool pgen_generates_shifted_points,
                /// Wave vector \f$\vect k\f$.
                cart3_t k,
                /// Lattice offset \f$\vect s\f$ wrt. the Bravais lattice.
                cart3_t particle_shift
                );
                
#endif //EWALD_H