From 65f903f911c08beefb1573c54cbadf821f5ce1f3 Mon Sep 17 00:00:00 2001 From: Gerhard Sittig Date: Wed, 10 Oct 2018 10:13:51 +0200 Subject: [PATCH] doc: mention lack of decoder signal name matching in manpage Users may assume that sigrok-cli automatically matches input trace names to decoder signals like pulseview does, and not be able to learn that this is not the case. Explicitly state that limitation in the manpage. --- doc/sigrok-cli.1 | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1 index 8fbb3a1..eac5942 100644 --- a/doc/sigrok-cli.1 +++ b/doc/sigrok-cli.1 @@ -229,6 +229,12 @@ is an option supported by the protocol decoder. Additionally, the user tells sigrok to decode the SPI protocol using channel 1 as MISO signal for SPI, channel 5 as MOSI, channel 3 as CLK, and channel 0 as CS# signal. +.sp +Notice that the +.B sigrok\-cli +application does not support "name matching". Instead it's assumed that the +traces in the input stream match the order of the decoder's input signals, +or that users explicitly specify the input channel to decoder signal mapping. .br .sp When multiple decoders are specified in the same -- 2.11.4.GIT