com32/lib/zlib/deflate.h

   1 /* deflate.h -- internal compression state
   2  * Copyright (C) 1995-2002 Jean-loup Gailly
   3  * For conditions of distribution and use, see copyright notice in zlib.h
   4  */
   5
   6 /* WARNING: this file should *not* be used by applications. It is
   7    part of the implementation of the compression library and is
   8    subject to change. Applications should only use zlib.h.
   9  */
  10
  11
  12 #ifndef DEFLATE_H
  13 #define DEFLATE_H
  14
  15 #include "zutil.h"
  16
  17 /* define NO_GZIP when compiling if you want to disable gzip header and
  18    trailer creation by deflate().  NO_GZIP would be used to avoid linking in
  19    the crc code when it is not needed.  For shared libraries, gzip encoding
  20    should be left enabled. */
  21 #ifndef NO_GZIP
  22 #  define GZIP
  23 #endif
  24
  25 /* ===========================================================================
  26  * Internal compression state.
  27  */
  28
  29 #define LENGTH_CODES 29
  30 /* number of length codes, not counting the special END_BLOCK code */
  31
  32 #define LITERALS  256
  33 /* number of literal bytes 0..255 */
  34
  35 #define L_CODES (LITERALS+1+LENGTH_CODES)
  36 /* number of Literal or Length codes, including the END_BLOCK code */
  37
  38 #define D_CODES   30
  39 /* number of distance codes */
  40
  41 #define BL_CODES  19
  42 /* number of codes used to transfer the bit lengths */
  43
  44 #define HEAP_SIZE (2*L_CODES+1)
  45 /* maximum heap size */
  46
  47 #define MAX_BITS 15
  48 /* All codes must not exceed MAX_BITS bits */
  49
  50 #define INIT_STATE    42
  51 #define BUSY_STATE   113
  52 #define FINISH_STATE 666
  53 /* Stream status */
  54
  55
  56 /* Data structure describing a single value and its code string. */
  57 typedef struct ct_data_s {
  58     union {
  59         ush  freq;       /* frequency count */
  60         ush  code;       /* bit string */
  61     } fc;
  62     union {
  63         ush  dad;        /* father node in Huffman tree */
  64         ush  len;        /* length of bit string */
  65     } dl;
  66 } FAR ct_data;
  67
  68 #define Freq fc.freq
  69 #define Code fc.code
  70 #define Dad  dl.dad
  71 #define Len  dl.len
  72
  73 typedef struct static_tree_desc_s  static_tree_desc;
  74
  75 typedef struct tree_desc_s {
  76     ct_data *dyn_tree;           /* the dynamic tree */
  77     int     max_code;            /* largest code with non zero frequency */
  78     static_tree_desc *stat_desc; /* the corresponding static tree */
  79 } FAR tree_desc;
  80
  81 typedef ush Pos;
  82 typedef Pos FAR Posf;
  83 typedef unsigned IPos;
  84
  85 /* A Pos is an index in the character window. We use short instead of int to
  86  * save space in the various tables. IPos is used only for parameter passing.
  87  */
  88
  89 typedef struct internal_state {
  90     z_streamp strm;      /* pointer back to this zlib stream */
  91     int   status;        /* as the name implies */
  92     Bytef *pending_buf;  /* output still pending */
  93     ulg   pending_buf_size; /* size of pending_buf */
  94     Bytef *pending_out;  /* next pending byte to output to the stream */
  95     int   pending;       /* nb of bytes in the pending buffer */
  96     int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
  97     Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
  98     Byte  method;        /* STORED (for zip only) or DEFLATED */
  99     int   last_flush;    /* value of flush param for previous deflate call */
 100
 101                 /* used by deflate.c: */
 102
 103     uInt  w_size;        /* LZ77 window size (32K by default) */
 104     uInt  w_bits;        /* log2(w_size)  (8..16) */
 105     uInt  w_mask;        /* w_size - 1 */
 106
 107     Bytef *window;
 108     /* Sliding window. Input bytes are read into the second half of the window,
 109      * and move to the first half later to keep a dictionary of at least wSize
 110      * bytes. With this organization, matches are limited to a distance of
 111      * wSize-MAX_MATCH bytes, but this ensures that IO is always
 112      * performed with a length multiple of the block size. Also, it limits
 113      * the window size to 64K, which is quite useful on MSDOS.
 114      * To do: use the user input buffer as sliding window.
 115      */
 116
 117     ulg window_size;
 118     /* Actual size of window: 2*wSize, except when the user input buffer
 119      * is directly used as sliding window.
 120      */
 121
 122     Posf *prev;
 123     /* Link to older string with same hash index. To limit the size of this
 124      * array to 64K, this link is maintained only for the last 32K strings.
 125      * An index in this array is thus a window index modulo 32K.
 126      */
 127
 128     Posf *head; /* Heads of the hash chains or NIL. */
 129
 130     uInt  ins_h;          /* hash index of string to be inserted */
 131     uInt  hash_size;      /* number of elements in hash table */
 132     uInt  hash_bits;      /* log2(hash_size) */
 133     uInt  hash_mask;      /* hash_size-1 */
 134
 135     uInt  hash_shift;
 136     /* Number of bits by which ins_h must be shifted at each input
 137      * step. It must be such that after MIN_MATCH steps, the oldest
 138      * byte no longer takes part in the hash key, that is:
 139      *   hash_shift * MIN_MATCH >= hash_bits
 140      */
 141
 142     long block_start;
 143     /* Window position at the beginning of the current output block. Gets
 144      * negative when the window is moved backwards.
 145      */
 146
 147     uInt match_length;           /* length of best match */
 148     IPos prev_match;             /* previous match */
 149     int match_available;         /* set if previous match exists */
 150     uInt strstart;               /* start of string to insert */
 151     uInt match_start;            /* start of matching string */
 152     uInt lookahead;              /* number of valid bytes ahead in window */
 153
 154     uInt prev_length;
 155     /* Length of the best match at previous step. Matches not greater than this
 156      * are discarded. This is used in the lazy match evaluation.
 157      */
 158
 159     uInt max_chain_length;
 160     /* To speed up deflation, hash chains are never searched beyond this
 161      * length.  A higher limit improves compression ratio but degrades the
 162      * speed.
 163      */
 164
 165     uInt max_lazy_match;
 166     /* Attempt to find a better match only when the current match is strictly
 167      * smaller than this value. This mechanism is used only for compression
 168      * levels >= 4.
 169      */
 170 #   define max_insert_length  max_lazy_match
 171     /* Insert new strings in the hash table only if the match length is not
 172      * greater than this length. This saves time but degrades compression.
 173      * max_insert_length is used only for compression levels <= 3.
 174      */
 175
 176     int level;    /* compression level (1..9) */
 177     int strategy; /* favor or force Huffman coding*/
 178
 179     uInt good_match;
 180     /* Use a faster search when the previous match is longer than this */
 181
 182     int nice_match; /* Stop searching when current match exceeds this */
 183
 184                 /* used by trees.c: */
 185     /* Didn't use ct_data typedef below to supress compiler warning */
 186     struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
 187     struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
 188     struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
 189
 190     struct tree_desc_s l_desc;               /* desc. for literal tree */
 191     struct tree_desc_s d_desc;               /* desc. for distance tree */
 192     struct tree_desc_s bl_desc;              /* desc. for bit length tree */
 193
 194     ush bl_count[MAX_BITS+1];
 195     /* number of codes at each bit length for an optimal tree */
 196
 197     int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
 198     int heap_len;               /* number of elements in the heap */
 199     int heap_max;               /* element of largest frequency */
 200     /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
 201      * The same heap array is used to build all trees.
 202      */
 203
 204     uch depth[2*L_CODES+1];
 205     /* Depth of each subtree used as tie breaker for trees of equal frequency
 206      */
 207
 208     uchf *l_buf;          /* buffer for literals or lengths */
 209
 210     uInt  lit_bufsize;
 211     /* Size of match buffer for literals/lengths.  There are 4 reasons for
 212      * limiting lit_bufsize to 64K:
 213      *   - frequencies can be kept in 16 bit counters
 214      *   - if compression is not successful for the first block, all input
 215      *     data is still in the window so we can still emit a stored block even
 216      *     when input comes from standard input.  (This can also be done for
 217      *     all blocks if lit_bufsize is not greater than 32K.)
 218      *   - if compression is not successful for a file smaller than 64K, we can
 219      *     even emit a stored file instead of a stored block (saving 5 bytes).
 220      *     This is applicable only for zip (not gzip or zlib).
 221      *   - creating new Huffman trees less frequently may not provide fast
 222      *     adaptation to changes in the input data statistics. (Take for
 223      *     example a binary file with poorly compressible code followed by
 224      *     a highly compressible string table.) Smaller buffer sizes give
 225      *     fast adaptation but have of course the overhead of transmitting
 226      *     trees more frequently.
 227      *   - I can't count above 4
 228      */
 229
 230     uInt last_lit;      /* running index in l_buf */
 231
 232     ushf *d_buf;
 233     /* Buffer for distances. To simplify the code, d_buf and l_buf have
 234      * the same number of elements. To use different lengths, an extra flag
 235      * array would be necessary.
 236      */
 237
 238     ulg opt_len;        /* bit length of current block with optimal trees */
 239     ulg static_len;     /* bit length of current block with static trees */
 240     uInt matches;       /* number of string matches in current block */
 241     int last_eob_len;   /* bit length of EOB code for last block */
 242
 243 #ifdef DEBUG
 244     ulg compressed_len; /* total bit length of compressed file mod 2^32 */
 245     ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 246 #endif
 247
 248     ush bi_buf;
 249     /* Output buffer. bits are inserted starting at the bottom (least
 250      * significant bits).
 251      */
 252     int bi_valid;
 253     /* Number of valid bits in bi_buf.  All bits above the last valid bit
 254      * are always zero.
 255      */
 256
 257 } FAR deflate_state;
 258
 259 /* Output a byte on the stream.
 260  * IN assertion: there is enough room in pending_buf.
 261  */
 262 #define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
 263
 264
 265 #define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
 266 /* Minimum amount of lookahead, except at the end of the input file.
 267  * See deflate.c for comments about the MIN_MATCH+1.
 268  */
 269
 270 #define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
 271 /* In order to simplify the code, particularly on 16 bit machines, match
 272  * distances are limited to MAX_DIST instead of WSIZE.
 273  */
 274
 275         /* in trees.c */
 276 void _tr_init         OF((deflate_state *s));
 277 int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
 278 void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
 279                           int eof));
 280 void _tr_align        OF((deflate_state *s));
 281 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
 282                           int eof));
 283
 284 #define d_code(dist) \
 285    ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
 286 /* Mapping from a distance to a distance code. dist is the distance - 1 and
 287  * must not have side effects. _dist_code[256] and _dist_code[257] are never
 288  * used.
 289  */
 290
 291 #ifndef DEBUG
 292 /* Inline versions of _tr_tally for speed: */
 293
 294 #if defined(GEN_TREES_H) || !defined(STDC)
 295   extern uch _length_code[];
 296   extern uch _dist_code[];
 297 #else
 298   extern const uch _length_code[];
 299   extern const uch _dist_code[];
 300 #endif
 301
 302 # define _tr_tally_lit(s, c, flush) \
 303   { uch cc = (c); \
 304     s->d_buf[s->last_lit] = 0; \
 305     s->l_buf[s->last_lit++] = cc; \
 306     s->dyn_ltree[cc].Freq++; \
 307     flush = (s->last_lit == s->lit_bufsize-1); \
 308    }
 309 # define _tr_tally_dist(s, distance, length, flush) \
 310   { uch len = (length); \
 311     ush dist = (distance); \
 312     s->d_buf[s->last_lit] = dist; \
 313     s->l_buf[s->last_lit++] = len; \
 314     dist--; \
 315     s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
 316     s->dyn_dtree[d_code(dist)].Freq++; \
 317     flush = (s->last_lit == s->lit_bufsize-1); \
 318   }
 319 #else
 320 # define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
 321 # define _tr_tally_dist(s, distance, length, flush) \
 322               flush = _tr_tally(s, distance, length)
 323 #endif
 324
 325 #endif /* DEFLATE_H */