release/src/Makefile

   1 #
   2 # Toplevel Makefile for the BCM947xx Linux Router release
   3 #
   4 # Copyright 2005, Broadcom Corporation
   5 # All Rights Reserved.
   6 #
   7 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11 #
  12 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  13 #
  14
  15 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16
  17 # To rebuild everything and all configurations:
  18 #  make distclean
  19 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n o
  20 # The 1st "whatever" would be the build number, the sub-whatever would
  21 #       be the update to the version.
  22 #
  23 # Example:
  24 # make V1=8516 V2="-jffs.1" a b c d m s n o
  25
  26 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  27
  28
  29 export ac_cv_func_malloc_0_nonnull=yes
  30 export SRCBASE := $(shell pwd)
  31 export SRCBASEDIR := $(shell pwd | sed 's/.*release\///g')
  32 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  33 PATH := $(RELEASEDIR)/tools:$(PATH)
  34 export TPROFILE := N
  35
  36 include ./target.mak
  37
  38 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  39 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  40 V1 ?= "--def"
  41 VPN ?= "VPN"
  42 ifeq ($(CONFIG_LINUX26),y)
  43 ifeq ($(CONFIG_BCMWL6),y)
  44 ND = "K26AC"
  45 else
  46 ND = "K26"
  47 endif
  48 else
  49 ND = "ND"
  50 endif
  51
  52 PPTPD ?= "n"
  53
  54 ifeq ($(NVRAM_SIZE),)
  55 NVRAM_SIZE = 0
  56 endif
  57
  58 ifeq ($(ASUS_TRX),)
  59 ASUS_TRX = 0
  60 endif
  61
  62
  63 ifeq ($(WNR3500LV2),)
  64 WNR3500LV2 = 0
  65 else
  66 WNRTOOL=$(SRCBASE)/wnrtool
  67 BOARD_FILE=$(WNRTOOL)/compatible_WNR3500Lv2.txt
  68 fw_cfg_file := $(WNRTOOL)/ambitCfg.h
  69 endif
  70
  71 ifeq ($(NVRAM_64K),y)
  72 EXTRA_64KDESC = ' -64K'
  73 EXTRA_64KCFLAG = '-DTCONFIG_NVRAM_64K'
  74 else
  75 EXTRA_64KDESC = ''
  76 EXTRA_64KCFLAG = ''
  77 endif
  78
  79 -include tomato_profile.mak
  80
  81 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  82 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  83 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  84 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  85 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  86 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  87 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  88
  89 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
  90 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
  91 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
  92 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
  93
  94 ifeq ($(CONFIG_LINUX26),y)
  95 mips_rev = $(if $(filter $(MIPS32),r2),MIPSR2,MIPSR1)
  96 KERN_SIZE_OPT ?= n
  97 else
  98 mips_rev =
  99 KERN_SIZE_OPT ?= y
 100 endif
 101
 102 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
 103
 104 tomato_ver:
 105         @echo ""
 106         @btools/uversion.pl --gen $(V1) $(mips_rev)$(beta)$(V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
 107
 108 ifeq ($(TOMATO_BUILD),)
 109
 110 all:
 111         $(MAKE) a
 112
 113 else
 114
 115 all: tomato_ver
 116         @echo ""
 117         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
 118
 119         @echo ""
 120         @echo ""
 121
 122         @-mkdir image
 123         @$(MAKE) -C router all
 124         @$(MAKE) -C router install
 125         @$(MAKE) -C btools
 126
 127         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx
 128         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 129
 130 ifneq ($(ASUS_TRX),0)
 131 ifeq ($(ASUS_TRX),EA6500V1)
 132         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 133                 -t image/tomato-$(ASUS_TRX)_$(V1)$(V2)-$(current_BUILD_DESC).trx \
 134                 | tee -a fpkg.log
 135 else
 136         $(MAKE) -C ctools
 137         ctools/objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUXDIR)/vmlinux ctools/piggy
 138         ctools/lzma_4k e ctools/piggy  ctools/vmlinuz-lzma
 139         ctools/mksquashfs router/mipsel-uclibc/target ctools/target.squashfs -noappend -all-root
 140         ctools/trx -o image/linux-lzma.trx ctools/vmlinuz-lzma ctools/target.squashfs
 141         ctools/trx_asus -i image/linux-lzma.trx -r $(BUILD_NAME),$(KERNEL_VER).$(FS_VER),image/tomato-$(ASUS_TRX)_$(V1)$(V2)-$(current_BUILD_DESC).trx
 142         @rm -f image/linux-lzma.trx
 143         @echo ""
 144 endif #AE6500V1
 145 endif
 146
 147 ifeq ($(WNR3500LV2),1)
 148         @echo "Creating Firmware for Netgear WNR3500L v2 .... "
 149         mipsel-uclibc-objcopy -O binary -g $(LINUXDIR)/vmlinux image/vmlinux.bin
 150         $(WNRTOOL)/lzma e image/vmlinux.bin image/vmlinux.lzma
 151         $(WNRTOOL)/trx -o image/tomato-wnr3500lv2.trx image/vmlinux.lzma $(SRCBASE)/router/mipsel-uclibc/target.image
 152         rm -f image/vmlinux.bin image/vmlinux.lzma
 153         cd image && touch rootfs
 154         cd image && $(WNRTOOL)/packet -k tomato-wnr3500lv2.trx -f rootfs -b $(BOARD_FILE) -ok kernel_image -oall kernel_rootfs_image -or rootfs_image -i $(fw_cfg_file) && rm -f rootfs && \
 155         cp kernel_rootfs_image.chk tomato-Netgear-3500Lv2-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(V2)-$(current_BUILD_DESC).chk
 156         @echo "Cleanup ...."
 157 #       rm -f image/*image.chk image/*.trx
 158 endif
 159
 160 ifeq ($(WRT54),y)
 161 ifneq ($(MIPS32),r2)
 162         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 163         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 164         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 165 endif
 166 endif
 167 ifeq ($(LINKSYS_E),y)
 168         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 169 endif
 170 ifeq ($(LINKSYS_E_64k),y)
 171         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 172 endif
 173 ifeq ($(LINKSYS_E1200v1),y)
 174         @rm -f image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 175 endif
 176 ifeq ($(LINKSYS_E1000v2),y)
 177         @rm -f image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 178         @rm -f image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 179 endif
 180 ifeq ($(LINKSYS_E2500),y)
 181         @rm -f image/tomato-E2500$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 182 endif
 183 ifeq ($(LINKSYS_E3200),y)
 184         @rm -f image/tomato-E3200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 185         @rm -f image/tomato-E2500v3$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 186 endif
 187 ifeq ($(BELKIN),y)
 188 ifneq ($(NVRAM_SIZE),60)
 189         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 190         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 191 endif
 192 endif
 193         @echo "" >>fpkg.log
 194         @echo "***********************" `date` "************************" >>fpkg.log
 195         @cat router/shared/tomato_version >>fpkg.log
 196         @echo "" >>fpkg.log
 197         @cat router/target.info >>fpkg.log
 198 ifeq ($(WRT54),y)
 199 ifneq ($(MIPS32),r2)
 200         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 201                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 202                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 203                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 204                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 205                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 206                 | tee -a fpkg.log
 207 endif
 208 endif
 209 ifeq ($(LINKSYS_E),y)
 210         # Linksys E-series(60k Nvram) images
 211         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 212                 -l 1550,image/tomato-E1550$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 213                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 214                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 215                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 216                 | tee -a fpkg.log
 217 endif
 218 ifeq ($(LINKSYS_E2500),y)
 219         # Linksys E2500(60k Nvram) image
 220         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 221                 -l E25X,image/tomato-E2500$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 222                 | tee -a fpkg.log
 223 endif
 224 ifeq ($(LINKSYS_E3200),y)
 225         # Linksys E3200/E2500v3(60k Nvram) image
 226         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 227                 -l 25V3,image/tomato-E2500v3$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 228                 -l 3200,image/tomato-E3200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 229                 | tee -a fpkg.log
 230 endif
 231 ifeq ($(LINKSYS_E_64k),y)
 232         # Linksys E-series(64k Nvram) images
 233         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 234                 -l E800,image/tomato-E800$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 235                 -l E900,image/tomato-E900$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 236                 -l E122,image/tomato-E1200v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 237                 -l E150,image/tomato-E1500$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 238                 | tee -a fpkg.log
 239 endif
 240 ifeq ($(LINKSYS_E1000v2),y)
 241         # Linksys E1000v2/v2.1 images
 242         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 243                 -l E100,image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 244                 -l M010,image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 245                 | tee -a fpkg.log
 246 endif
 247 ifeq ($(LINKSYS_E1200v1),y)
 248         # Linksys E1200v1 images
 249         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 250                 -l E120,image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 251                 | tee -a fpkg.log
 252 endif
 253 ifeq ($(BELKIN),y)
 254 ifneq ($(NVRAM_SIZE),60)
 255         # Create Belkin images
 256         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 257                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 258                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 259                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 260                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 261                 | tee -a fpkg.log
 262 endif
 263 endif
 264         # Create generic TRX image
 265         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 266                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).trx \
 267                 | tee -a fpkg.log
 268
 269         @cp fpkg.log image/fpkg-$(V1)$(mips_rev)$(beta)$(V2).log
 270         @echo ""
 271         @echo "-----------------"
 272         @echo `cat router/shared/tomato_version` " ready"
 273         @echo "-----------------"
 274 ifneq ($(NOVERSION),1)
 275         @cp router/shared/tomato_version router/shared/tomato_version_last
 276         @btools/uversion.pl --bump
 277 endif
 278 endif
 279
 280
 281
 282 clean:
 283         @touch router/.config
 284         @rm -f router/config_[a-z]
 285         @rm -f router/busybox/config_[a-z]
 286         @$(MAKE) -C router $@
 287         @-rmdir router/mipsel-uclibc
 288
 289 cleanimage:
 290         @rm -f fpkg.log
 291         @rm -fr image/*
 292         @rm -f router/.config
 293         @touch router/.config
 294         @-mkdir image
 295
 296 cleantools:
 297         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 298         @$(MAKE) -C btools clean
 299
 300 cleankernel:
 301         @cd $(LINUXDIR) && \
 302         mv .config save-config && \
 303         $(MAKE) distclean || true; \
 304         cp -p save-config .config || true
 305
 306 kernel:
 307         @$(MAKE) -C router kernel
 308         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 309
 310 distclean: clean cleanimage cleankernel cleantools
 311 ifneq ($(INSIDE_MAK),1)
 312         @$(MAKE) -C router $@ INSIDE_MAK=1
 313 endif
 314         mv router/busybox/.config busybox-saved-config || true
 315         @$(MAKE) -C router/busybox distclean
 316         @rm -f router/busybox/config_current
 317         @cp -p busybox-saved-config router/busybox/.config || true
 318         @cp -p router/busybox/.config  router/busybox/config_current || true
 319         @rm -f router/config_current
 320         @rm -f router/.config.cmd router/.config.old router/.config
 321         @rm -f router/libfoo_xref.txt
 322         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 323         @touch tomato_profile.mak
 324         @touch router/shared/tomato_profile.h
 325
 326
 327 prepk:
 328         @cd $(LINUXDIR) ; \
 329                 rm -f config_current ; \
 330                 ln -s config_base config_current ; \
 331                 cp -f config_current .config
 332         $(MAKE) -C $(LINUXDIR) oldconfig
 333 ifneq ($(CONFIG_LINUX26),y)
 334         $(MAKE) -C $(LINUXDIR) dep
 335 endif
 336
 337 what:
 338         @echo ""
 339         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 340         @echo ""
 341
 342
 343 # The methodology for making the different builds is to
 344 # copy the "base" config file to the "target" config file in
 345 # the appropriate directory, and then edit it by removing and
 346 # inserting the desired configuration lines.
 347 # You can't just delete the "whatever=y" line, you must have
 348 # a "...is not set" line, or the make oldconfig will stop and ask
 349 # what to do.
 350
 351 # Options for "make bin" :
 352 # BUILD_DESC (Std|Lite|Ext|...)
 353 # MIPS32 (r2|r1)
 354 # WNR3500LV2 (0|1)
 355 # KERN_SIZE_OPT
 356 # USB ("USB"|"")
 357 # JFFSv1 | NO_JFFS
 358 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT
 359 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, UFSD, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM, NOCAT CTF NGINX
 360 # NFS BTCLIENT BTGUI TR_EXTRAS SNMP SDHC HFS UPS DNSCRYPT PPTPD TOR IPSEC RAID MICROSD USBAP NO_USBAPP
 361
 362 define RouterOptions
 363         @( \
 364         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 365                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 366                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 367         fi; \
 368         sed -i "/TCONFIG_EMF/d" $(1); \
 369         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 370                 if [ "$(SLIM)" = "y" ]; then \
 371                         echo "# TCONFIG_EMF is not set" >>$(1); \
 372                 else \
 373                         echo "TCONFIG_EMF=y" >>$(1); \
 374                 fi; \
 375         else \
 376                 echo "# TCONFIG_EMF is not set" >>$(1); \
 377         fi; \
 378         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 379         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 380                 if [ "$(JFFSv1)" = "y" ]; then \
 381                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 382                 else \
 383                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 384                 fi; \
 385         else \
 386                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 387         fi; \
 388         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(IPSEC)" = "y" ]; then \
 389                 echo "TCONFIG_IPSEC=y" >>$(1); \
 390         else \
 391                 echo "# TCONFIG_IPSEC is not set" >>$(1); \
 392         fi; \
 393         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(RAID)" = "y" ]; then \
 394                 echo "TCONFIG_RAID=y" >>$(1); \
 395         else \
 396                 echo "# TCONFIG_RAID is not set" >>$(1); \
 397         fi; \
 398         if [ "$(USB)" = "USB" ]; then \
 399                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 400                 echo "TCONFIG_USB=y" >>$(1); \
 401                 if [ "$(USBEXTRAS)" = "y" ]; then \
 402                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 403                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 404                 fi; \
 405                 if [ "$(NTFS)" = "y" ]; then \
 406                         sed -i "/TCONFIG_NTFS/d" $(1); \
 407                         echo "TCONFIG_NTFS=y" >>$(1); \
 408                 fi; \
 409                 if [ "$(UFSD)" = "y" ]; then \
 410                         sed -i "/TCONFIG_UFSD/d" $(1); \
 411                         echo "TCONFIG_UFSD=y" >>$(1); \
 412                 fi; \
 413                 if [ "$(MEDIASRV)" = "y" ]; then \
 414                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 415                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 416                 fi; \
 417         else \
 418                 sed -i "/TCONFIG_USB=y/d" $(1); \
 419                 echo "# TCONFIG_USB is not set" >>$(1); \
 420         fi; \
 421         if [ "$(NO_SAMBA)" = "y" ]; then \
 422                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 423                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 424         fi; \
 425         if [ "$(NO_ZEBRA)" = "y" ]; then \
 426                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 427                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 428         fi; \
 429         if [ "$(NO_JFFS)" = "y" ]; then \
 430                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 431                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 432                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 433                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 434         fi; \
 435         if [ "$(NO_CIFS)" = "y" ]; then \
 436                 sed -i "/TCONFIG_CIFS/d" $(1); \
 437                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 438         fi; \
 439         if [ "$(NO_SSH)" = "y" ]; then \
 440                 sed -i "/TCONFIG_SSH/d" $(1); \
 441                 echo "# TCONFIG_SSH is not set" >>$(1); \
 442         fi; \
 443         if [ "$(NO_HTTPS)" = "y" ]; then \
 444                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 445                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 446         fi; \
 447         if [ "$(NO_XXTP)" = "y" ]; then \
 448                 sed -i "/TCONFIG_L2TP/d" $(1); \
 449                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 450                 sed -i "/TCONFIG_PPTP/d" $(1); \
 451                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 452         fi; \
 453         if [ "$(NO_LIBOPT)" = "y" ]; then \
 454                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 455                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 456         fi; \
 457         if [ "$(EBTABLES)" = "y" ]; then \
 458                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 459                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 460         fi; \
 461         if [ "$(IPV6SUPP)" = "y" ]; then \
 462                 sed -i "/TCONFIG_IPV6/d" $(1); \
 463                 echo "TCONFIG_IPV6=y" >>$(1); \
 464         fi; \
 465         if [ "$(NOCAT)" = "y" ]; then \
 466                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 467                 echo "TCONFIG_NOCAT=y" >>$(1); \
 468         fi; \
 469         if [ "$(NGINX)" = "y" ]; then \
 470                 sed -i "/TCONFIG_NGINX/d" $(1); \
 471                 echo "TCONFIG_NGINX=y" >>$(1); \
 472         fi; \
 473         if [ "$(OPENVPN)" = "y" ]; then \
 474                 sed -i "/TCONFIG_LZO/d" $(1); \
 475                 echo "TCONFIG_LZO=y" >>$(1); \
 476                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 477                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 478                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 479                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 480                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 481                 fi; \
 482         fi; \
 483         if [ "$(PPTPD)" = "y" ]; then \
 484                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 485                 echo "TCONFIG_PPTPD=y" >>$(1); \
 486         fi; \
 487         if [ "$(BTCLIENT)" = "y" ]; then \
 488                 sed -i "/TCONFIG_BT/d" $(1); \
 489                 echo "TCONFIG_BT=y" >>$(1); \
 490                 sed -i "/TCONFIG_BBT/d" $(1); \
 491                 echo "TCONFIG_BBT=y" >>$(1); \
 492         fi; \
 493         if [ "$(BTGUI)" = "y" ]; then \
 494                 sed -i "/TCONFIG_BT/d" $(1); \
 495                 echo "TCONFIG_BT=y" >>$(1); \
 496         fi; \
 497         if [ "$(TR_EXTRAS)" = "y" ]; then \
 498                 sed -i "/TCONFIG_TR_EXTRAS/d" $(1); \
 499                 echo "TCONFIG_TR_EXTRAS=y" >>$(1); \
 500         fi; \
 501         if [ "$(NFS)" = "y" ]; then \
 502                 sed -i "/TCONFIG_NFS/d" $(1); \
 503                 echo "TCONFIG_NFS=y" >>$(1); \
 504         fi; \
 505         if [ "$(SNMP)" = "y" ]; then \
 506                 sed -i "/TCONFIG_SNMP/d" $(1); \
 507                 echo "TCONFIG_SNMP=y" >>$(1); \
 508         fi; \
 509         if [ "$(SDHC)" = "y" ]; then \
 510                 sed -i "/TCONFIG_SDHC/d" $(1); \
 511                 echo "TCONFIG_SDHC=y" >>$(1); \
 512         fi; \
 513         if [ "$(DNSSEC)" = "y" ]; then \
 514                 sed -i "/TCONFIG_DNSSEC/d" $(1); \
 515                 echo "TCONFIG_DNSSEC=y" >>$(1); \
 516         fi; \
 517         if [ "$(HFS)" = "y" ]; then \
 518                 sed -i "/TCONFIG_HFS/d" $(1); \
 519                 echo "TCONFIG_HFS=y" >>$(1); \
 520         fi; \
 521         if [ "$(UPS)" = "y" ]; then \
 522                 sed -i "/TCONFIG_UPS/d" $(1); \
 523                 echo "TCONFIG_UPS=y" >>$(1); \
 524         fi; \
 525         if [ "$(DNSCRYPT)" = "y" ]; then \
 526                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 527                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 528         fi; \
 529         if [ "$(NVRAM_64K)" = "y" ]; then \
 530                 sed -i "/TCONFIG_NVRAM_64K/d" $(1); \
 531                 echo "TCONFIG_NVRAM_64K=y" >>$(1); \
 532         fi; \
 533         if [ "$(TOR)" = "y" ]; then \
 534                 sed -i "/TCONFIG_TOR/d" $(1); \
 535                 echo "TCONFIG_TOR=y" >>$(1); \
 536         fi; \
 537         if [ "$(MICROSD)" = "y" ]; then \
 538                 sed -i "/TCONFIG_MICROSD/d" $(1); \
 539                 echo "TCONFIG_MICROSD=y" >>$(1); \
 540         fi; \
 541         if [ "$(USBAP)" = "y" ]; then \
 542                 sed -i "/TCONFIG_USBAP/d" $(1); \
 543                 echo "TCONFIG_USBAP=y" >>$(1); \
 544                 if [ "$(NO_USBAPP)" = "y" ]; then \
 545                         sed -i "/TCONFIG_REMOVE_USBAPP/d" $(1); \
 546                         echo "TCONFIG_REMOVE_USBAPP=y" >>$(1); \
 547                         sed -i "/TCONFIG_FTP/d" $(1); \
 548                         echo "# TCONFIG_FTP is not set" >>$(1); \
 549                         echo "# TCONFIG_FTP_SSL is not set" >>$(1); \
 550                         sed -i "/TCONFIG_SAMBA/d" $(1); \
 551                         echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 552                         echo "# TCONFIG_SAMBA3 is not set" >>$(1); \
 553                 fi; \
 554         fi; \
 555         if [ "$(ASUS_TRX)" = "RT-AC66U" ]; then \
 556                 sed -i "/TCONFIG_AC66U/d" $(1); \
 557                 echo "TCONFIG_AC66U=y" >>$(1); \
 558         else \
 559                 sed -i "/TCONFIG_AC66U/d" $(1); \
 560                 echo "# TCONFIG_AC66U is not set" >>$(1); \
 561         fi; \
 562         if [ "$(CTF)" = "y" ]; then \
 563                 sed -i "/TCONFIG_CTF/d" $(1); \
 564                 echo "TCONFIG_CTF=y" >>$(1); \
 565         fi; \
 566         if [ "$(TINC)" = "y" ]; then \
 567                 sed -i "/TCONFIG_TINC/d" $(1); \
 568                 echo "TCONFIG_TINC=y" >>$(1); \
 569         fi; \
 570         )
 571 endef
 572
 573 define BusyboxOptions
 574         @( \
 575         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 576                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 577                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 578                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 579                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 580                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 581                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 582                 sed -i "/CONFIG_MKNOD/d" $(1); \
 583                 echo "CONFIG_MKNOD=y" >>$(1); \
 584                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 585                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 586         else \
 587                 sed -i "/CONFIG_UDHCPC=y/d" $(1); \
 588                 sed -i "/CONFIG_UDHCPC_OLD/d" $(1); \
 589                 echo "CONFIG_UDHCPC_OLD=y" >>$(1); \
 590                 echo "# CONFIG_UDHCPC is not set" >>$(1); \
 591         fi; \
 592         if [ "$(NO_CIFS)" = "y" ]; then \
 593                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 594                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 595         fi; \
 596         if [ "$(BBEXTRAS)" = "y" ]; then \
 597                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 598                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 599                 sed -i "/CONFIG_WHOIS/d" $(1); \
 600                 echo "CONFIG_WHOIS=y" >>$(1); \
 601                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 602                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 603                 sed -i "/CONFIG_CLEAR/d" $(1); \
 604                 echo "CONFIG_CLEAR=y" >>$(1); \
 605                 sed -i "/CONFIG_NICE/d" $(1); \
 606                 echo "CONFIG_NICE=y" >>$(1); \
 607                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 608                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 609                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 610                 echo "CONFIG_MKFIFO=y" >>$(1); \
 611                 sed -i "/CONFIG_SEQ/d" $(1); \
 612                 echo "CONFIG_SEQ=y" >>$(1); \
 613                 sed -i "/CONFIG_STTY/d" $(1); \
 614                 echo "CONFIG_STTY=y" >>$(1); \
 615         fi; \
 616         if [ "$(USB)" = "USB" ]; then \
 617                 if [ "$(USBEXTRAS)" = "y" ]; then \
 618                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 619                         echo "CONFIG_E2FSCK=y" >>$(1); \
 620                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 621                         echo "CONFIG_MKE2FS=y" >>$(1); \
 622                         sed -i "/CONFIG_FDISK/d" $(1); \
 623                         echo "CONFIG_FDISK=y" >>$(1); \
 624                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 625                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 626                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 627                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 628                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 629                         echo "CONFIG_MKSWAP=y" >>$(1); \
 630                         sed -i "/CONFIG_FLOCK/d" $(1); \
 631                         echo "CONFIG_FLOCK=y" >>$(1); \
 632                         sed -i "/CONFIG_FSYNC/d" $(1); \
 633                         echo "CONFIG_FSYNC=y" >>$(1); \
 634                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 635                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 636                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 637                         echo "CONFIG_E2LABEL=y" >>$(1); \
 638                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 639                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 640                                 echo "CONFIG_LSUSB=y" >>$(1); \
 641                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 642                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 643                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 644                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 645                         fi; \
 646                 fi; \
 647         else \
 648                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 649                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 650                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 651                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 652                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 653                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 654                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 655                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 656                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 657                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 658                 sed -i "/CONFIG_BLKID/d" $(1); \
 659                 echo "# CONFIG_BLKID is not set" >>$(1); \
 660                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 661                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 662                 sed -i "/CONFIG_CHROOT/d" $(1); \
 663                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 664                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 665                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 666                 sed -i "/CONFIG_TRUE/d" $(1); \
 667                 echo "# CONFIG_TRUE is not set" >>$(1); \
 668         fi; \
 669         if [ "$(IPV6SUPP)" = "y" ]; then \
 670                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 671                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 672                 sed -i "/CONFIG_PING6/d" $(1); \
 673                 echo "CONFIG_PING6=y" >>$(1); \
 674                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 675                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 676                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 677                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 678                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 679                 fi; \
 680         fi; \
 681         if [ "$(SLIM)" = "y" ]; then \
 682                 sed -i "/CONFIG_AWK/d" $(1); \
 683                 echo "# CONFIG_AWK is not set" >>$(1); \
 684                 sed -i "/CONFIG_BASENAME/d" $(1); \
 685                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 686                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 687                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 688                 sed -i "/CONFIG_BLKID/d" $(1); \
 689                 echo "# CONFIG_BLKID is not set" >>$(1); \
 690                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 691                 echo "# CONFIG_TELNET is not set" >>$(1); \
 692                 sed -i "/CONFIG_ARPING/d" $(1); \
 693                 echo "# CONFIG_ARPING is not set" >>$(1); \
 694                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 695                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 696                 sed -i "/CONFIG_CHOWN/d" $(1); \
 697                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 698         else \
 699                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 700                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 701                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 702                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 703         fi; \
 704         )
 705 endef
 706
 707 define KernelConfig
 708         @( \
 709         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 710         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 711         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 712         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 713                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 714         else \
 715                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 716         fi; \
 717         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 718                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 719                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 720                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 721                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 722                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 723                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 724                 if [ "$(NAND)" = "y" ]; then \
 725                         sed -i "/CONFIG_MTD_NFLASH/d" $(1); \
 726                         echo "CONFIG_MTD_NFLASH=y" >>$(1); \
 727                         sed -i "/CONFIG_MTD_NAND/d" $(1); \
 728                         echo "CONFIG_MTD_NAND=y" >>$(1); \
 729                         echo "CONFIG_MTD_NAND_IDS=y" >>$(1); \
 730                         echo "# CONFIG_MTD_NAND_VERIFY_WRITE is not set" >>$(1); \
 731                         echo "# CONFIG_MTD_NAND_ECC_SMC is not set" >>$(1); \
 732                         echo "# CONFIG_MTD_NAND_MUSEUM_IDS is not set" >>$(1); \
 733                         echo "# CONFIG_MTD_NAND_DISKONCHIP is not set" >>$(1); \
 734                         echo "# CONFIG_MTD_NAND_CAFE is not set" >>$(1); \
 735                         echo "# CONFIG_MTD_NAND_NANDSIM is not set" >>$(1); \
 736                         echo "# CONFIG_MTD_NAND_PLATFORM is not set" >>$(1); \
 737                         echo "# CONFIG_MTD_NAND_ONENAND is not set" >>$(1); \
 738                         sed -i "/CONFIG_MTD_BRCMNAND/d" $(1); \
 739                         echo "CONFIG_MTD_BRCMNAND=y" >>$(1); \
 740                 fi; \
 741                 if [ "$(WNR3500LV2)" = "1" ]; then \
 742                         sed -i "/CONFIG_MTD_NFLASH/d" $(1); \
 743                         echo "CONFIG_MTD_NFLASH=y" >>$(1); \
 744                 fi; \
 745         fi; \
 746         if [ "$(UPS)" = "y" ]; then \
 747                 sed -i "/CONFIG_INPUT=m/d" $(1); \
 748                 echo "CONFIG_INPUT=y" >>$(1); \
 749                 sed -i "/CONFIG_USB=m/d" $(1); \
 750                 echo "CONFIG_USB=y" >>$(1); \
 751                 sed -i "/CONFIG_HID=m/d" $(1); \
 752                 echo "CONFIG_HID=y" >>$(1); \
 753                 sed -i "/CONFIG_USB_HID=m/d" $(1); \
 754                 echo "CONFIG_USB_HID=y" >>$(1); \
 755                 sed -i "/CONFIG_USB_HIDDEV=m/d" $(1); \
 756                 echo "CONFIG_USB_HIDDEV=y" >>$(1); \
 757                 sed -i "/CONFIG_USB_DEVICEFS=m/d" $(1); \
 758                 echo "CONFIG_USB_DEVICEFS=y" >>$(1); \
 759         fi; \
 760         if [ "$(USB)" = "" ]; then \
 761                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 762                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 763         fi; \
 764         if [ "$(IPV6SUPP)" = "y" ]; then \
 765                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 766                 echo "CONFIG_IPV6=y" >>$(1); \
 767                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 768                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 769                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 770                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 771                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 772                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 773                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 774                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 775                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 776                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 777                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 778                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 779                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 780                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 781                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 782                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 783                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 784                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 785                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 786                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 787                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 788                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 789                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 790                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 791                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 792                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 793                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 794                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 795                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 796                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 797                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 798                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 799                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 800                         sed -i "/CONFIG_INET6_XFRM_TUNNEL/d" $(1); \
 801                         echo "CONFIG_INET6_XFRM_TUNNEL=m" >>$(1); \
 802                         sed -i "/CONFIG_INET6_AH/d" $(1); \
 803                         echo "CONFIG_INET6_AH=m" >>$(1); \
 804                         sed -i "/CONFIG_INET6_ESP/d" $(1); \
 805                         echo "CONFIG_INET6_ESP=m" >>$(1); \
 806                         sed -i "/CONFIG_INET6_IPCOMP/d" $(1); \
 807                         echo "CONFIG_INET6_IPCOMP=m" >>$(1); \
 808                         sed -i "/CONFIG_INET6_XFRM_MODE_TRANSPORT/d" $(1); \
 809                         echo "CONFIG_INET6_XFRM_MODE_TRANSPORT=m" >>$(1); \
 810                         sed -i "/CONFIG_INET6_XFRM_MODE_TUNNEL/d" $(1); \
 811                         echo "CONFIG_INET6_XFRM_MODE_TUNNEL=m" >>$(1); \
 812                         sed -i "/CONFIG_INET6_XFRM_MODE_BEET/d" $(1); \
 813                         echo "CONFIG_INET6_XFRM_MODE_BEET=m" >>$(1); \
 814                 else \
 815                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 816                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 817                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 818                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 819                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 820                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 821                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 822                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 823                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 824                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 825                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 826                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 827                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 828                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 829                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 830                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 831                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 832                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 833                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 834                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 835                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 836                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 837                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 838                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 839                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 840                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 841                 fi; \
 842         fi; \
 843         sed -i "/CONFIG_BCM57XX/d" $(1); \
 844         if [ "$(BCM57)" = "y" ]; then \
 845                 echo "CONFIG_BCM57XX=m" >>$(1); \
 846         else \
 847                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 848         fi; \
 849         if [ "$(USBAP)" = "y" ]; then \
 850                 echo "CONFIG_WL_USBAP=y" >>$(1); \
 851                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_high"' >>$(1); \
 852         else \
 853                 echo "# CONFIG_WL_USBAP is not set" >>$(1); \
 854                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_apsta"' >>$(1); \
 855         fi; \
 856         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 857                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 858                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 859                 if [ "$(IPV6SUPP)" = "y" ]; then \
 860                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 861                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 862                 fi; \
 863         fi; \
 864         sed -i "/CONFIG_NVRAM_64K/d" $(1); \
 865         if [ "$(NVRAM_64K)" = "y" ]; then \
 866                 echo "CONFIG_NVRAM_64K=y" >>$(1); \
 867         else \
 868                 echo "# CONFIG_NVRAM_64K is not set" >>$(1); \
 869         fi \
 870         )
 871 endef
 872
 873
 874 bin:
 875 ifeq ($(B),)
 876         @echo $@" is not a valid target!"
 877         @false
 878 endif
 879         @cp router/config_base router/config_$(lowercase_B)
 880         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 881         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 882
 883         $(call RouterOptions, router/config_$(lowercase_B))
 884         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 885         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 886
 887         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)"
 888         @$(MAKE) all
 889
 890 ## mini-USB - K24 only
 891 n:
 892 ifneq ($(CONFIG_LINUX26),y)
 893         @$(MAKE) bin BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="mini-USB" USB="USB"
 894 endif
 895
 896 ## VPN
 897 e:
 898 ifeq ($(CONFIG_LINUX26),y)
 899         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" DNSCRYPT=y PPTPD=y
 900 else
 901         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y B=E BUILD_DESC="$(VPN)" USB="USB" DNSCRYPT=y PPTPD=y
 902 endif
 903
 904 ## BTgui-VPN
 905 c:
 906 ifeq ($(CONFIG_LINUX26),y)
 907         @$(MAKE) bin NTFS=y OPENVPN=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BTgui-VPN" USB="USB" BTGUI=y DNSCRYPT=y PPTPD=y
 908 else
 909         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="BTgui" USB="USB" BTGUI=y DNSCRYPT=y PPTPD=y
 910 endif
 911
 912 ## Nocat-VPN
 913 d:
 914 ifeq ($(CONFIG_LINUX26),y)
 915         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y
 916 else
 917         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Nocat-VPN" USB="USB" BTGUI=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y
 918 endif
 919
 920 ## TOR-VPN
 921 g:
 922 ifeq ($(CONFIG_LINUX26),y)
 923         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 924 else
 925         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Tor-VPN" USB="USB" BTGUI=y TOR=y OPENVPN=y PPTPD=y NO_CIFS=y NO_JFFS=y
 926 endif
 927
 928 ## BT
 929 u:
 930 ifeq ($(CONFIG_LINUX26),y)
 931         @$(MAKE) bin NTFS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 932 else
 933         @$(MAKE) bin NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT" USB="USB" BTCLIENT=y
 934 endif
 935
 936 ## BT-VPN
 937 t:
 938 ifeq ($(CONFIG_LINUX26),y)
 939         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 940 else
 941         @$(MAKE) bin OPENVPN=y NTFS=y USBEXTRAS=y B=M BUILD_DESC="BT-VPN" USB="USB" BTCLIENT=y NO_JFFS=y PPTPD=y
 942 endif
 943
 944 ## Big-VPN
 945 b:
 946 ifeq ($(CONFIG_LINUX26),y)
 947         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NFS=y NOCAT=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JFFS=y NO_CIFS=y
 948 else
 949         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Big-VPN" USB="USB" BTGUI=y NOCAT=y NFS=y OPENVPN=y DNSCRYPT=y PPTPD=y NO_JJFS=y NO_CIFS=y
 950 endif
 951
 952 ## Mega-VPN
 953 o:
 954 ifeq ($(CONFIG_LINUX26),y)
 955         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="Mega-VPN" USB="USB" NOCAT=y BTCLIENT=y DNSCRYPT=y SNMP=y UPS=y PPTPD=y TR_EXTRAS=y TOR=y IPSEC=y RAID=y
 956
 957 ## All-In-One (AIO) MIPS1 - only for router with more than 8MB flash!! ZTE H618B
 958 z:
 959         @$(MAKE) bin OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="AIO" USB="USB" NOCAT=y BTCLIENT=y TR_EXTRAS=y NFS=y SNMP=y HFS=y DNSCRYPT=y UPS=y PPTPD=y TOR=y IPSEC=y RAID=y NGINX=y DNSSEC=y TINC=y
 960 endif
 961
 962 #################################
 963
 964 ifeq ($(CONFIG_LINUX26),y)
 965
 966 ## Mini - targeted for Netgear routers
 967 f:
 968         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB=""
 969
 970 ## MiniIPv6 - for 4MB routers
 971 i:
 972         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB=""
 973
 974 ## MiniVPN - for 4MB routers
 975 j:
 976         @$(MAKE) bin NO_JFFS=y NO_CIFS=y NO_ZEBRA=y B=V BUILD_DESC="MiniVPN" USB="" PPTPD=y OPENVPN=y
 977 endif
 978
 979 ## VPN with no USB support (IPv6 in K26 build)
 980 v:
 981 ifeq ($(CONFIG_LINUX26),y)
 982         @$(MAKE) bin OPENVPN=y NO_JFFS=y B=V BUILD_DESC="IPv6-$(VPN)" USB="" PPTPD=y IPV6SUPP=y
 983 else
 984         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" PPTPD=y
 985 endif
 986
 987 ## Max build for router with 8MB flash without USB Support
 988 m:
 989 ifeq ($(CONFIG_LINUX26),y)
 990         @$(MAKE) bin OPENVPN=y BBEXTRAS=y EBTABLES=y IPV6SUPP=y B=E BUILD_DESC="Max" USB="" NOCAT=y NFS=y SNMP=y DNSCRYPT=y PPTPD=y TOR=y IPSEC=y
 991 endif
 992
 993 ## SD-VPN - Only k24
 994 w:
 995 ifneq ($(CONFIG_LINUX26),y)
 996         @$(MAKE) bin OPENVPN=y BBEXTRAS=y BCM57=y B=V BUILD_DESC="SD-VPN" USB="" SDHC=y DNSCRYPT=y PPTPD=y
 997 endif
 998
 999
1000 ## Make Mips32r2 builds ##
1001 ifeq ($(CONFIG_LINUX26),y)
1002
1003 #AIO MIPS2 for RT-N16 and E4200
1004 r2z:
1005         @$(MAKE) z MIPS32=r2
1006
1007 r2e:
1008         @$(MAKE) e MIPS32=r2
1009
1010 r2c:
1011         @$(MAKE) c MIPS32=r2
1012
1013 r2u:
1014         @$(MAKE) u MIPS32=r2
1015
1016 r2t:
1017         @$(MAKE) t MIPS32=r2
1018
1019 r2d:
1020         @$(MAKE) d MIPS32=r2
1021
1022 r2g:
1023         @$(MAKE) g MIPS32=r2
1024
1025 r2b:
1026         @$(MAKE) b MIPS32=r2
1027
1028 r2o:
1029         @$(MAKE) o MIPS32=r2
1030
1031 r2f:
1032         @$(MAKE) f MIPS32=r2 BELKIN=y
1033
1034 r2i:
1035         @$(MAKE) i MIPS32=r2
1036
1037 r2j:
1038         @$(MAKE) j MIPS32=r2
1039
1040 r2v:
1041         @$(MAKE) v MIPS32=r2
1042
1043 r2m:
1044         @$(MAKE) m MIPS32=r2
1045
1046 #Linksys E-series witk 60K NVRAM builds
1047 n60z:
1048         @$(MAKE) r2z NVRAM_SIZE=60 LINKSYS_E=y
1049
1050 n60e:
1051         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
1052
1053 n60c:
1054         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
1055
1056 n60u:
1057         @$(MAKE) r2u NVRAM_SIZE=60 LINKSYS_E=y
1058
1059 n60t:
1060         @$(MAKE) r2t NVRAM_SIZE=60 LINKSYS_E=y
1061
1062 n60b:
1063         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
1064
1065 n60d:
1066         @$(MAKE) r2d NVRAM_SIZE=60 LINKSYS_E=y
1067
1068 n60g:
1069         @$(MAKE) r2g NVRAM_SIZE=60 LINKSYS_E=y
1070
1071 n60o:
1072         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
1073
1074 n60i:
1075         @$(MAKE) r2i NVRAM_SIZE=60 LINKSYS_E=y
1076
1077 n60j:
1078         @$(MAKE) r2j NVRAM_SIZE=60 LINKSYS_E=y
1079
1080 n60v:
1081         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=y
1082
1083 n60m:
1084         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
1085
1086 #Linksys E-Series with 64K Nvram Builds
1087
1088 n64z:
1089         @$(MAKE) r2z NVRAM_SIZE=64 LINKSYS_E_64k=y
1090
1091 n64e:
1092         @$(MAKE) r2e NVRAM_SIZE=64 LINKSYS_E_64k=y
1093
1094 n64c:
1095         @$(MAKE) r2c NVRAM_SIZE=64 LINKSYS_E_64k=y
1096
1097 n64u:
1098         @$(MAKE) r2u NVRAM_SIZE=64 LINKSYS_E_64k=y
1099
1100 n64t:
1101         @$(MAKE) r2t NVRAM_SIZE=64 LINKSYS_E_64k=y
1102
1103 n64b:
1104         @$(MAKE) r2b NVRAM_SIZE=64 LINKSYS_E_64k=y
1105
1106 n64d:
1107         @$(MAKE) r2d NVRAM_SIZE=64 LINKSYS_E_64k=y
1108
1109 n64g:
1110         @$(MAKE) r2g NVRAM_SIZE=64 LINKSYS_E_64k=y
1111
1112 n64o:
1113         @$(MAKE) r2o NVRAM_SIZE=64 LINKSYS_E_64k=y
1114
1115 n64v:
1116         @$(MAKE) r2v NVRAM_SIZE=64 LINKSYS_E_64k=y
1117
1118 n64m:
1119         @$(MAKE) r2m NVRAM_SIZE=64 LINKSYS_E_64k=y
1120
1121
1122 #Linksys E-Series with 4MB Flash (Max Flashsize=3866624)
1123
1124 e1000v2f:
1125         @$(MAKE) bin MIPS32=r2 NVRAM_SIZE=32 LINKSYS_E1000v2=y NO_JFFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB="" NO_HTTPS=y KERN_SIZE_OPT=y
1126
1127 e1000v2i:
1128         @$(MAKE) bin MIPS32=r2 NVRAM_SIZE=32 LINKSYS_E1000v2=y NO_JFFS=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I USB="" NO_HTTPS=y KERN_SIZE_OPT=y BUILD_DESC="MiniIPv6"
1129
1130 e1200v1f:
1131         @$(MAKE) bin MIPS32=r2 NVRAM_SIZE=64 LINKSYS_E1200v1=y NO_JFFS=y NO_ZEBRA=y B=F BUILD_DESC="Mini" USB="" NO_HTTPS=y KERN_SIZE_OPT=y
1132
1133 e1200v1i:
1134         @$(MAKE) bin MIPS32=r2 NVRAM_SIZE=64 LINKSYS_E1200v1=y NO_JFFS=y NO_CIFS=y NO_ZEBRA=y IPV6SUPP=y B=I USB="" NO_HTTPS=y KERN_SIZE_OPT=y BUILD_DESC="MiniIPv6"
1135
1136 #Builds for WNR3500L v2
1137 v2z:
1138         @$(MAKE) z MIPS32=r2 WNR3500LV2=1 NO_JFFS=y
1139
1140 v2e:
1141         @$(MAKE) e MIPS32=r2 WNR3500LV2=1 NO_JFFS=y
1142
1143 #Builds with wl_high module
1144 rtn53:
1145         @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y B=E BUILD_DESC="RT-N53" USB="USB" SNMP=y DNSCRYPT=y PPTPD=y TOR=y NOCAT=y USBAP=y NO_USBAPP=y
1146
1147 e2500:
1148         @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y B=E BUILD_DESC="Max" USB="USB" SNMP=y DNSCRYPT=y PPTPD=y TOR=y NOCAT=y USBAP=y NO_USBAPP=y NVRAM_SIZE=60 LINKSYS_E2500=y
1149
1150 e3200:
1151         @$(MAKE) r2o USBAP=y NVRAM_SIZE=60 LINKSYS_E3200=y
1152
1153 n6:
1154         @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y IPV6SUPP=y B=E BUILD_DESC="TendaN6" USB="USB" TOR=y NOCAT=y DNSCRYPT=y PPTPD=y USBAP=y NO_USBAPP=y
1155
1156 n60:
1157         @$(MAKE) bin MIPS32=r2 BBEXTRAS=y USBEXTRAS=y EBTABLES=y IPV6SUPP=y B=E BUILD_DESC="TendaN60" USB="USB" NO_JFFS=y NTFS=y MEDIASRV=y USBAP=y
1158
1159 n60init:
1160         @$(MAKE) bin MIPS32=r2 B=E BUILD_DESC="TendaN60-init" USB="" NO_JFFS=y NO_CIFS=y NO_HTTPS=y NO_XXTP=y NO_ZEBRA=y NO_SSH=y
1161
1162 # it`s not possible to flash tomato on this router. Maybe in the future.
1163 #l600n:
1164 #       @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y B=E BUILD_DESC="L600N" USB="USB" SNMP=y DNSCRYPT=y PPTPD=y TOR=y NOCAT=y USBAP=y
1165
1166 #Builds for Asus RT-N66u with 64k NVRAM support
1167 ifeq ($(CONFIG_BCMWL6),y)
1168 r64z:
1169         @$(MAKE) z MIPS32=r2 NVRAM_64K=y MICROSD=y ASUS_TRX="RT-N66U" UFSD=y
1170
1171 r64e:
1172         @$(MAKE) e MIPS32=r2 NVRAM_64K=y MICROSD=y ASUS_TRX="RT-N66U" UFSD=y
1173 else
1174 r64z:
1175         @$(MAKE) z MIPS32=r2 NVRAM_64K=y MICROSD=y
1176
1177 r64e:
1178         @$(MAKE) e MIPS32=r2 NVRAM_64K=y MICROSD=y
1179 endif
1180
1181 ifeq ($(CONFIG_BCMWL6),y)
1182 ac66e:
1183         @$(MAKE) e MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="RT-AC66U" UFSD=y
1184
1185 ac66z:
1186         @$(MAKE) z MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="RT-AC66U" UFSD=y
1187
1188 w1800re:
1189         @$(MAKE) e MIPS32=r2 NVRAM_64K=y ASUS_TRX="W1800R"
1190
1191 w1800rz:
1192         @$(MAKE) z MIPS32=r2 NVRAM_64K=y ASUS_TRX="W1800R"
1193
1194 #d1800he:
1195 #       @$(MAKE) e MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="D1800H"
1196
1197 #d1800hz:
1198 #       @$(MAKE) z MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="D1800H"
1199
1200 #ea6500e:
1201 #       @$(MAKE) e MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="EA6500V1"
1202
1203 #ea6500z:
1204 #       @$(MAKE) z MIPS32=r2 NVRAM_64K=y NAND=y ASUS_TRX="EA6500V1"
1205 endif
1206
1207 # end of CONFIG_LINUX26
1208 endif
1209
1210 setprofile:
1211         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
1212         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
1213         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
1214         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
1215         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
1216         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
1217         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
1218         echo '#define TOMATO_BUILD_DESC "$(DESC)$(EXTRA_64KDESC)"' >> router/shared/tomato_profile.h
1219         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
1220         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
1221         echo '#endif' >> router/shared/tomato_profile.h
1222         echo '#endif' >> router/shared/tomato_profile.h
1223
1224         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
1225         echo 'PROFILE_G = 1' >> tomato_profile.mak
1226         echo 'PROFILE_N = 2' >> tomato_profile.mak
1227         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
1228         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
1229         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
1230         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
1231         echo 'TOMATO_BUILD_DESC = "$(DESC)$(EXTRA_64KDESC)"' >> tomato_profile.mak
1232         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
1233         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
1234         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
1235
1236         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE)) $(EXTRA_64KCFLAG)' >> tomato_profile.mak
1237
1238 # Note that changes to variables in tomato_profile.mak don't
1239 # get propogated to this invocation of make!
1240         @echo ""
1241         @echo "Using $(N) profile, $(B) build config."
1242         @echo ""
1243
1244         @cd $(LINUXDIR) ; \
1245                 rm -f config_current ; \
1246                 ln -s config_$(lowercase_B) config_current ; \
1247                 cp -f config_current .config
1248
1249         @cd router/busybox && \
1250                 rm -f config_current ; \
1251                 ln -s config_$(lowercase_B) config_current ; \
1252                 cp config_current .config
1253
1254         @cd router ; \
1255                 rm -f config_current ; \
1256                 ln -s config_$(lowercase_B) config_current ; \
1257                 cp config_current .config
1258
1259         @$(MAKE) -C router oldconfig
1260
1261 help:
1262         @echo "n            Mini-USB - for oruter with 4MB flash and USB port - K24 only"
1263         @echo "e            VPN - (standard plus VPN, extra utilities and NTFS support)"
1264         @echo "c            BTgui-VPN - (Ext plus BT gui)"
1265         @echo "d            Nocat-VPN - (BTgui plus VPN plus Nocat)"
1266         @echo "g            Tor-VPN - (BTgui plus VPN plus TOR Project)"
1267         @echo "t            BT-VPN - (BT plus VPN)"
1268         @echo "b            Big-VPN - (Big plus VPN)"
1269         @echo "o            Mega-VPN - (Mega plus VPN plus NOCAT minus NFS)"
1270 ifeq ($(CONFIG_LINUX26),y)
1271         @echo "z            MIPS Release 15F AIO (for routers +8MB flash)"
1272         @echo "i            MiniIPv6 - (IPv6 with no USB support minus CIFS and RIPv1/2)"
1273         @echo "j            MiniVPN - (VPN with no USB support minus CIFS and RIPv1/2)"
1274 endif
1275         @echo "f            Mini - (no USB support minus CIFS and RIPv1/2)"
1276         @echo "v            VPN (no usb) - (VPN with no USB support)" / in K26 + IPv6 support
1277         @echo "m            Max (no usb) - (Max with no USB support)" / in K26 + IPv6 support
1278         @echo "w            SD-VPN (no usb) - (VPN with SD-MOD and no USB support)"
1279 ifeq ($(CONFIG_LINUX26),y)
1280         @echo "r2e          MIPS Release 2 VPN"
1281         @echo "r2c          MIPS Release 2 BTgui-VPN"
1282         @echo "r2d          MIPS Release 2 Nocat-VPN"
1283         @echo "r2g          MIPS Release 2 Tor-VPN"
1284         @echo "r2t          MIPS Release 2 BT-VPN"
1285         @echo "r2b          MIPS Release 2 Big-VPN"
1286         @echo "r2o          MIPS Release 2 Mega-VPN (for routers +8MB flash)"
1287         @echo "r2z          MIPS Release 2 AIO (for routers +8MB flash)"
1288         @echo "r2v          MIPS Release 2 VPN (no usb)"
1289         @echo "r2m          MIPS Release 2 Max (no usb)"
1290         @echo "r2i          MIPS Release 2 MiniIPv6 (for 4MB flash)"
1291         @echo "r2j          MIPS Release 2 MiniVPN (for 4MB flash)"
1292         @echo "r2f          MIPS Release 2 Mini (for netgear)"
1293         @echo "       Linksys E-Series with 4MB Flash(E1000v2/v2.1/E1200v1)"
1294         @echo "e1000v2f     Linksys E1000v2-v2.1/Cisco M10v2 Mini"
1295         @echo "e1000v2i     Linksys E1000v2-v2.1/Cisco M10v2 MiniIPv6"
1296         @echo "e1200v1f     Linksys E1200v1 Mini"
1297         @echo "e1200v1i     Linksys E1200v1 MiniIPv6"
1298         @echo "       Linksys E-Series with 60k Nvram"
1299         @echo "n60e         Linksys E-series build VPN"
1300         @echo "n60c         Linksys E-series build BTGui-VPN"
1301         @echo "n60d         Linksys E-series build BTGui-VPN plus Nocat"
1302         @echo "n60g         Linksys E-series build BTGui-VPN plus TOR Project"
1303         @echo "n60t         Linksys E-series build BT-VPN"
1304         @echo "n60b         Linksys E-series build Big-VPN"
1305         @echo "n60o         Linksys E-series build Mega-VPN"
1306         @echo "n60z         Linksys E-series build AIO"
1307         @echo "n60i         Linksys E-series build Mini for E2500"
1308         @echo "n60j         Linksys E-series build MiniIPv6 for E2500"
1309         @echo "n60v         Linksys E-series build IPv6-VPN for E2000"
1310         @echo "n60m         Linksys E-series build Max for E2000"
1311         @echo "       Linksys E-Series with 64k Nvram/8MB Flash(E800/E900/E1200v2/E1500)"
1312         @echo "n64e         Linksys E-series(64k Nvram) build VPN"
1313         @echo "n64c         Linksys E-series(64k Nvram) build BTGui-VPN"
1314         @echo "n64d         Linksys E-series(64k Nvram) build BTGui-VPN plus Nocat"
1315         @echo "n64g         Linksys E-series(64k Nvram) build BTGui-VPN plus TOR Project"
1316         @echo "n64u         Linksys E-series(64k Nvram) build BT"
1317         @echo "n64t         Linksys E-series(64k Nvram) build BT-VPN"
1318         @echo "n64b         Linksys E-series(64k Nvram) build Big-VPN"
1319         @echo "n64o         Linksys E-series(64k Nvram) build Mega-VPN"
1320         @echo "n64v         Linksys E-series(64k Nvram) build IPv6-VPN"
1321         @echo "n64m         Linksys E-series(64k Nvram) build Max"
1322         @echo "       Routers with wl_high module"
1323         @echo "rtn53        Asus RT-N53 with wl_high module (dualband support)"
1324         @echo "e2500        Linksys E2500 with wl_high module (dualband support)"
1325         @echo "e3200        Linksys E3200/E2500v3 with wl_high module (dualband support) / max 16MB"
1326         @echo "n6           Tenda N6 with wl_high module (dualband support)"
1327         @echo "n60          Tenda N60 with wl_high module (dualband support)"
1328 #       @echo "l600n        Rosewill L600N Build with wl_high module (dualband support)"
1329         @echo "       Netgear WNR3500L v2 builds (128MB Flash)"
1330         @echo "v2e          Netgear WNR3500Lv2 build VPN"
1331         @echo "v2z          Netgear WNR3500Lv2 build AIO"
1332         @echo ""
1333         @echo "r64e         RT-N66u build VPN"
1334         @echo "r64z         RT-N66u build AIO"
1335 ifeq ($(CONFIG_BCMWL6),y)
1336         @echo "       Routers with AC mode support"
1337         @echo "ac66e        RT-AC66u build VPN"
1338         @echo "ac66z        RT-AC66u build AIO"
1339         @echo "w1800re      Tenda W1800R build VPN"
1340         @echo "w1800rz      Tenda W1800R build AIO"
1341 #       @echo "d1800he      Buffalo D1800H build VPN"
1342 #       @echo "d1800hz      Buffalo D1800H build AIO"
1343 #       @echo "ea6500e      Linksys EA6500v1 build VPN"
1344 #       @echo "ea6500z      Linksys EA6500v1 build AIO"
1345 endif
1346 endif
1347         @echo ""
1348         @echo "..etc..      other build configs"
1349         @echo "clean        -C router clean"
1350         @echo "cleanimage   rm -rf image"
1351         @echo "cleantools   clean btools, mksquashfs"
1352         @echo "cleankernel  -C Linux distclean (but preserves .config)"
1353         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
1354         @echo "prepk        -C Linux oldconfig dep"
1355
1356 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
1357 .PHONY: a b c d m nc Makefile allversions tomato_profile.mak