arm: vf610: fix double iomux configuration for vf610twr board

[u-boot/qq2440-u-boot.git] / drivers / misc / cros_ec.c

/*
 * Chromium OS cros_ec driver
 *
 * Copyright (c) 2012 The Chromium OS Authors.
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

/*
 * This is the interface to the Chrome OS EC. It provides keyboard functions,
 * power control and battery management. Quite a few other functions are
 * provided to enable the EC software to be updated, talk to the EC's I2C bus
 * and store a small amount of data in a memory which persists while the EC
 * is not reset.
 */

#include <common.h>
#include <command.h>
#include <i2c.h>
#include <cros_ec.h>
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>

#ifdef DEBUG_TRACE
#define debug_trace(fmt, b...)  debug(fmt, #b)
#else
#define debug_trace(fmt, b...)
#endif

enum {
        /* Timeout waiting for a flash erase command to complete */
        CROS_EC_CMD_TIMEOUT_MS  = 5000,
        /* Timeout waiting for a synchronous hash to be recomputed */
        CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
};

static struct cros_ec_dev static_dev, *last_dev;

DECLARE_GLOBAL_DATA_PTR;

/* Note: depends on enum ec_current_image */
static const char * const ec_current_image_name[] = {"unknown", "RO", "RW"};

void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len)
{
#ifdef DEBUG
        int i;

        printf("%s: ", name);
        if (cmd != -1)
                printf("cmd=%#x: ", cmd);
        for (i = 0; i < len; i++)
                printf("%02x ", data[i]);
        printf("\n");
#endif
}

/*
 * Calculate a simple 8-bit checksum of a data block
 *
 * @param data  Data block to checksum
 * @param size  Size of data block in bytes
 * @return checksum value (0 to 255)
 */
int cros_ec_calc_checksum(const uint8_t *data, int size)
{
        int csum, i;

        for (i = csum = 0; i < size; i++)
                csum += data[i];
        return csum & 0xff;
}

/**
 * Create a request packet for protocol version 3.
 *
 * The packet is stored in the device's internal output buffer.
 *
 * @param dev           CROS-EC device
 * @param cmd           Command to send (EC_CMD_...)
 * @param cmd_version   Version of command to send (EC_VER_...)
 * @param dout          Output data (may be NULL If dout_len=0)
 * @param dout_len      Size of output data in bytes
 * @return packet size in bytes, or <0 if error.
 */
static int create_proto3_request(struct cros_ec_dev *dev,
                                 int cmd, int cmd_version,
                                 const void *dout, int dout_len)
{
        struct ec_host_request *rq = (struct ec_host_request *)dev->dout;
        int out_bytes = dout_len + sizeof(*rq);

        /* Fail if output size is too big */
        if (out_bytes > (int)sizeof(dev->dout)) {
                debug("%s: Cannot send %d bytes\n", __func__, dout_len);
                return -EC_RES_REQUEST_TRUNCATED;
        }

        /* Fill in request packet */
        rq->struct_version = EC_HOST_REQUEST_VERSION;
        rq->checksum = 0;
        rq->command = cmd;
        rq->command_version = cmd_version;
        rq->reserved = 0;
        rq->data_len = dout_len;

        /* Copy data after header */
        memcpy(rq + 1, dout, dout_len);

        /* Write checksum field so the entire packet sums to 0 */
        rq->checksum = (uint8_t)(-cros_ec_calc_checksum(dev->dout, out_bytes));

        cros_ec_dump_data("out", cmd, dev->dout, out_bytes);

        /* Return size of request packet */
        return out_bytes;
}

/**
 * Prepare the device to receive a protocol version 3 response.
 *
 * @param dev           CROS-EC device
 * @param din_len       Maximum size of response in bytes
 * @return maximum expected number of bytes in response, or <0 if error.
 */
static int prepare_proto3_response_buffer(struct cros_ec_dev *dev, int din_len)
{
        int in_bytes = din_len + sizeof(struct ec_host_response);

        /* Fail if input size is too big */
        if (in_bytes > (int)sizeof(dev->din)) {
                debug("%s: Cannot receive %d bytes\n", __func__, din_len);
                return -EC_RES_RESPONSE_TOO_BIG;
        }

        /* Return expected size of response packet */
        return in_bytes;
}

/**
 * Handle a protocol version 3 response packet.
 *
 * The packet must already be stored in the device's internal input buffer.
 *
 * @param dev           CROS-EC device
 * @param dinp          Returns pointer to response data
 * @param din_len       Maximum size of response in bytes
 * @return number of bytes of response data, or <0 if error
 */
static int handle_proto3_response(struct cros_ec_dev *dev,
                                  uint8_t **dinp, int din_len)
{
        struct ec_host_response *rs = (struct ec_host_response *)dev->din;
        int in_bytes;
        int csum;

        cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs));

        /* Check input data */
        if (rs->struct_version != EC_HOST_RESPONSE_VERSION) {
                debug("%s: EC response version mismatch\n", __func__);
                return -EC_RES_INVALID_RESPONSE;
        }

        if (rs->reserved) {
                debug("%s: EC response reserved != 0\n", __func__);
                return -EC_RES_INVALID_RESPONSE;
        }

        if (rs->data_len > din_len) {
                debug("%s: EC returned too much data\n", __func__);
                return -EC_RES_RESPONSE_TOO_BIG;
        }

        cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len);

        /* Update in_bytes to actual data size */
        in_bytes = sizeof(*rs) + rs->data_len;

        /* Verify checksum */
        csum = cros_ec_calc_checksum(dev->din, in_bytes);
        if (csum) {
                debug("%s: EC response checksum invalid: 0x%02x\n", __func__,
                      csum);
                return -EC_RES_INVALID_CHECKSUM;
        }

        /* Return error result, if any */
        if (rs->result)
                return -(int)rs->result;

        /* If we're still here, set response data pointer and return length */
        *dinp = (uint8_t *)(rs + 1);

        return rs->data_len;
}

static int send_command_proto3(struct cros_ec_dev *dev,
                               int cmd, int cmd_version,
                               const void *dout, int dout_len,
                               uint8_t **dinp, int din_len)
{
        int out_bytes, in_bytes;
        int rv;

        /* Create request packet */
        out_bytes = create_proto3_request(dev, cmd, cmd_version,
                                          dout, dout_len);
        if (out_bytes < 0)
                return out_bytes;

        /* Prepare response buffer */
        in_bytes = prepare_proto3_response_buffer(dev, din_len);
        if (in_bytes < 0)
                return in_bytes;

        switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
        case CROS_EC_IF_SPI:
                rv = cros_ec_spi_packet(dev, out_bytes, in_bytes);
                break;
#endif
#ifdef CONFIG_CROS_EC_SANDBOX
        case CROS_EC_IF_SANDBOX:
                rv = cros_ec_sandbox_packet(dev, out_bytes, in_bytes);
                break;
#endif
        case CROS_EC_IF_NONE:
        /* TODO: support protocol 3 for LPC, I2C; for now fall through */
        default:
                debug("%s: Unsupported interface\n", __func__);
                rv = -1;
        }
        if (rv < 0)
                return rv;

        /* Process the response */
        return handle_proto3_response(dev, dinp, din_len);
}

static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
                        const void *dout, int dout_len,
                        uint8_t **dinp, int din_len)
{
        int ret = -1;

        /* Handle protocol version 3 support */
        if (dev->protocol_version == 3) {
                return send_command_proto3(dev, cmd, cmd_version,
                                           dout, dout_len, dinp, din_len);
        }

        switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
        case CROS_EC_IF_SPI:
                ret = cros_ec_spi_command(dev, cmd, cmd_version,
                                        (const uint8_t *)dout, dout_len,
                                        dinp, din_len);
                break;
#endif
#ifdef CONFIG_CROS_EC_I2C
        case CROS_EC_IF_I2C:
                ret = cros_ec_i2c_command(dev, cmd, cmd_version,
                                        (const uint8_t *)dout, dout_len,
                                        dinp, din_len);
                break;
#endif
#ifdef CONFIG_CROS_EC_LPC
        case CROS_EC_IF_LPC:
                ret = cros_ec_lpc_command(dev, cmd, cmd_version,
                                        (const uint8_t *)dout, dout_len,
                                        dinp, din_len);
                break;
#endif
        case CROS_EC_IF_NONE:
        default:
                ret = -1;
        }

        return ret;
}

/**
 * Send a command to the CROS-EC device and return the reply.
 *
 * The device's internal input/output buffers are used.
 *
 * @param dev           CROS-EC device
 * @param cmd           Command to send (EC_CMD_...)
 * @param cmd_version   Version of command to send (EC_VER_...)
 * @param dout          Output data (may be NULL If dout_len=0)
 * @param dout_len      Size of output data in bytes
 * @param dinp          Response data (may be NULL If din_len=0).
 *                      If not NULL, it will be updated to point to the data
 *                      and will always be double word aligned (64-bits)
 * @param din_len       Maximum size of response in bytes
 * @return number of bytes in response, or -1 on error
 */
static int ec_command_inptr(struct cros_ec_dev *dev, uint8_t cmd,
                int cmd_version, const void *dout, int dout_len, uint8_t **dinp,
                int din_len)
{
        uint8_t *din = NULL;
        int len;

        len = send_command(dev, cmd, cmd_version, dout, dout_len,
                                &din, din_len);

        /* If the command doesn't complete, wait a while */
        if (len == -EC_RES_IN_PROGRESS) {
                struct ec_response_get_comms_status *resp = NULL;
                ulong start;

                /* Wait for command to complete */
                start = get_timer(0);
                do {
                        int ret;

                        mdelay(50);     /* Insert some reasonable delay */
                        ret = send_command(dev, EC_CMD_GET_COMMS_STATUS, 0,
                                        NULL, 0,
                                        (uint8_t **)&resp, sizeof(*resp));
                        if (ret < 0)
                                return ret;

                        if (get_timer(start) > CROS_EC_CMD_TIMEOUT_MS) {
                                debug("%s: Command %#02x timeout\n",
                                      __func__, cmd);
                                return -EC_RES_TIMEOUT;
                        }
                } while (resp->flags & EC_COMMS_STATUS_PROCESSING);

                /* OK it completed, so read the status response */
                /* not sure why it was 0 for the last argument */
                len = send_command(dev, EC_CMD_RESEND_RESPONSE, 0,
                                NULL, 0, &din, din_len);
        }

        debug("%s: len=%d, dinp=%p, *dinp=%p\n", __func__, len, dinp,
              dinp ? *dinp : NULL);
        if (dinp) {
                /* If we have any data to return, it must be 64bit-aligned */
                assert(len <= 0 || !((uintptr_t)din & 7));
                *dinp = din;
        }

        return len;
}

/**
 * Send a command to the CROS-EC device and return the reply.
 *
 * The device's internal input/output buffers are used.
 *
 * @param dev           CROS-EC device
 * @param cmd           Command to send (EC_CMD_...)
 * @param cmd_version   Version of command to send (EC_VER_...)
 * @param dout          Output data (may be NULL If dout_len=0)
 * @param dout_len      Size of output data in bytes
 * @param din           Response data (may be NULL If din_len=0).
 *                      It not NULL, it is a place for ec_command() to copy the
 *      data to.
 * @param din_len       Maximum size of response in bytes
 * @return number of bytes in response, or -1 on error
 */
static int ec_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
                      const void *dout, int dout_len,
                      void *din, int din_len)
{
        uint8_t *in_buffer;
        int len;

        assert((din_len == 0) || din);
        len = ec_command_inptr(dev, cmd, cmd_version, dout, dout_len,
                        &in_buffer, din_len);
        if (len > 0) {
                /*
                 * If we were asked to put it somewhere, do so, otherwise just
                 * disregard the result.
                 */
                if (din && in_buffer) {
                        assert(len <= din_len);
                        memmove(din, in_buffer, len);
                }
        }
        return len;
}

int cros_ec_scan_keyboard(struct cros_ec_dev *dev, struct mbkp_keyscan *scan)
{
        if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
                       sizeof(scan->data)) != sizeof(scan->data))
                return -1;

        return 0;
}

int cros_ec_read_id(struct cros_ec_dev *dev, char *id, int maxlen)
{
        struct ec_response_get_version *r;

        if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
                        (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
                return -1;

        if (maxlen > (int)sizeof(r->version_string_ro))
                maxlen = sizeof(r->version_string_ro);

        switch (r->current_image) {
        case EC_IMAGE_RO:
                memcpy(id, r->version_string_ro, maxlen);
                break;
        case EC_IMAGE_RW:
                memcpy(id, r->version_string_rw, maxlen);
                break;
        default:
                return -1;
        }

        id[maxlen - 1] = '\0';
        return 0;
}

int cros_ec_read_version(struct cros_ec_dev *dev,
                       struct ec_response_get_version **versionp)
{
        if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
                        (uint8_t **)versionp, sizeof(**versionp))
                        != sizeof(**versionp))
                return -1;

        return 0;
}

int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp)
{
        if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
                        (uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0)
                return -1;

        return 0;
}

int cros_ec_read_current_image(struct cros_ec_dev *dev,
                enum ec_current_image *image)
{
        struct ec_response_get_version *r;

        if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
                        (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
                return -1;

        *image = r->current_image;
        return 0;
}

static int cros_ec_wait_on_hash_done(struct cros_ec_dev *dev,
                                  struct ec_response_vboot_hash *hash)
{
        struct ec_params_vboot_hash p;
        ulong start;

        start = get_timer(0);
        while (hash->status == EC_VBOOT_HASH_STATUS_BUSY) {
                mdelay(50);     /* Insert some reasonable delay */

                p.cmd = EC_VBOOT_HASH_GET;
                if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
                       hash, sizeof(*hash)) < 0)
                        return -1;

                if (get_timer(start) > CROS_EC_CMD_HASH_TIMEOUT_MS) {
                        debug("%s: EC_VBOOT_HASH_GET timeout\n", __func__);
                        return -EC_RES_TIMEOUT;
                }
        }
        return 0;
}


int cros_ec_read_hash(struct cros_ec_dev *dev,
                struct ec_response_vboot_hash *hash)
{
        struct ec_params_vboot_hash p;
        int rv;

        p.cmd = EC_VBOOT_HASH_GET;
        if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
                       hash, sizeof(*hash)) < 0)
                return -1;

        /* If the EC is busy calculating the hash, fidget until it's done. */
        rv = cros_ec_wait_on_hash_done(dev, hash);
        if (rv)
                return rv;

        /* If the hash is valid, we're done. Otherwise, we have to kick it off
         * again and wait for it to complete. Note that we explicitly assume
         * that hashing zero bytes is always wrong, even though that would
         * produce a valid hash value. */
        if (hash->status == EC_VBOOT_HASH_STATUS_DONE && hash->size)
                return 0;

        debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
              __func__, hash->status, hash->size);

        p.cmd = EC_VBOOT_HASH_START;
        p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
        p.nonce_size = 0;
        p.offset = EC_VBOOT_HASH_OFFSET_RW;

        if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
                       hash, sizeof(*hash)) < 0)
                return -1;

        rv = cros_ec_wait_on_hash_done(dev, hash);
        if (rv)
                return rv;

        debug("%s: hash done\n", __func__);

        return 0;
}

static int cros_ec_invalidate_hash(struct cros_ec_dev *dev)
{
        struct ec_params_vboot_hash p;
        struct ec_response_vboot_hash *hash;

        /* We don't have an explict command for the EC to discard its current
         * hash value, so we'll just tell it to calculate one that we know is
         * wrong (we claim that hashing zero bytes is always invalid).
         */
        p.cmd = EC_VBOOT_HASH_RECALC;
        p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
        p.nonce_size = 0;
        p.offset = 0;
        p.size = 0;

        debug("%s:\n", __func__);

        if (ec_command_inptr(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
                       (uint8_t **)&hash, sizeof(*hash)) < 0)
                return -1;

        /* No need to wait for it to finish */
        return 0;
}

int cros_ec_reboot(struct cros_ec_dev *dev, enum ec_reboot_cmd cmd,
                uint8_t flags)
{
        struct ec_params_reboot_ec p;

        p.cmd = cmd;
        p.flags = flags;

        if (ec_command_inptr(dev, EC_CMD_REBOOT_EC, 0, &p, sizeof(p), NULL, 0)
                        < 0)
                return -1;

        if (!(flags & EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
                /*
                 * EC reboot will take place immediately so delay to allow it
                 * to complete.  Note that some reboot types (EC_REBOOT_COLD)
                 * will reboot the AP as well, in which case we won't actually
                 * get to this point.
                 */
                /*
                 * TODO(rspangler@chromium.org): Would be nice if we had a
                 * better way to determine when the reboot is complete.  Could
                 * we poll a memory-mapped LPC value?
                 */
                udelay(50000);
        }

        return 0;
}

int cros_ec_interrupt_pending(struct cros_ec_dev *dev)
{
        /* no interrupt support : always poll */
        if (!fdt_gpio_isvalid(&dev->ec_int))
                return -ENOENT;

        return !gpio_get_value(dev->ec_int.gpio);
}

int cros_ec_info(struct cros_ec_dev *dev, struct ec_response_mkbp_info *info)
{
        if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info,
                       sizeof(*info)) != sizeof(*info))
                return -1;

        return 0;
}

int cros_ec_get_host_events(struct cros_ec_dev *dev, uint32_t *events_ptr)
{
        struct ec_response_host_event_mask *resp;

        /*
         * Use the B copy of the event flags, because the main copy is already
         * used by ACPI/SMI.
         */
        if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
                       (uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp))
                return -1;

        if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
                return -1;

        *events_ptr = resp->mask;
        return 0;
}

int cros_ec_clear_host_events(struct cros_ec_dev *dev, uint32_t events)
{
        struct ec_params_host_event_mask params;

        params.mask = events;

        /*
         * Use the B copy of the event flags, so it affects the data returned
         * by cros_ec_get_host_events().
         */
        if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_CLEAR_B, 0,
                       &params, sizeof(params), NULL, 0) < 0)
                return -1;

        return 0;
}

int cros_ec_flash_protect(struct cros_ec_dev *dev,
                       uint32_t set_mask, uint32_t set_flags,
                       struct ec_response_flash_protect *resp)
{
        struct ec_params_flash_protect params;

        params.mask = set_mask;
        params.flags = set_flags;

        if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
                       &params, sizeof(params),
                       resp, sizeof(*resp)) != sizeof(*resp))
                return -1;

        return 0;
}

static int cros_ec_check_version(struct cros_ec_dev *dev)
{
        struct ec_params_hello req;
        struct ec_response_hello *resp;

#ifdef CONFIG_CROS_EC_LPC
        /* LPC has its own way of doing this */
        if (dev->interface == CROS_EC_IF_LPC)
                return cros_ec_lpc_check_version(dev);
#endif

        /*
         * TODO(sjg@chromium.org).
         * There is a strange oddity here with the EC. We could just ignore
         * the response, i.e. pass the last two parameters as NULL and 0.
         * In this case we won't read back very many bytes from the EC.
         * On the I2C bus the EC gets upset about this and will try to send
         * the bytes anyway. This means that we will have to wait for that
         * to complete before continuing with a new EC command.
         *
         * This problem is probably unique to the I2C bus.
         *
         * So for now, just read all the data anyway.
         */

        /* Try sending a version 3 packet */
        dev->protocol_version = 3;
        if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
                             (uint8_t **)&resp, sizeof(*resp)) > 0) {
                return 0;
        }

        /* Try sending a version 2 packet */
        dev->protocol_version = 2;
        if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
                       (uint8_t **)&resp, sizeof(*resp)) > 0) {
                return 0;
        }

        /*
         * Fail if we're still here, since the EC doesn't understand any
         * protcol version we speak.  Version 1 interface without command
         * version is no longer supported, and we don't know about any new
         * protocol versions.
         */
        dev->protocol_version = 0;
        printf("%s: ERROR: old EC interface not supported\n", __func__);
        return -1;
}

int cros_ec_test(struct cros_ec_dev *dev)
{
        struct ec_params_hello req;
        struct ec_response_hello *resp;

        req.in_data = 0x12345678;
        if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
                       (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp)) {
                printf("ec_command_inptr() returned error\n");
                return -1;
        }
        if (resp->out_data != req.in_data + 0x01020304) {
                printf("Received invalid handshake %x\n", resp->out_data);
                return -1;
        }

        return 0;
}

int cros_ec_flash_offset(struct cros_ec_dev *dev, enum ec_flash_region region,
                      uint32_t *offset, uint32_t *size)
{
        struct ec_params_flash_region_info p;
        struct ec_response_flash_region_info *r;
        int ret;

        p.region = region;
        ret = ec_command_inptr(dev, EC_CMD_FLASH_REGION_INFO,
                         EC_VER_FLASH_REGION_INFO,
                         &p, sizeof(p), (uint8_t **)&r, sizeof(*r));
        if (ret != sizeof(*r))
                return -1;

        if (offset)
                *offset = r->offset;
        if (size)
                *size = r->size;

        return 0;
}

int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset, uint32_t size)
{
        struct ec_params_flash_erase p;

        p.offset = offset;
        p.size = size;
        return ec_command_inptr(dev, EC_CMD_FLASH_ERASE, 0, &p, sizeof(p),
                        NULL, 0);
}

/**
 * Write a single block to the flash
 *
 * Write a block of data to the EC flash. The size must not exceed the flash
 * write block size which you can obtain from cros_ec_flash_write_burst_size().
 *
 * The offset starts at 0. You can obtain the region information from
 * cros_ec_flash_offset() to find out where to write for a particular region.
 *
 * Attempting to write to the region where the EC is currently running from
 * will result in an error.
 *
 * @param dev           CROS-EC device
 * @param data          Pointer to data buffer to write
 * @param offset        Offset within flash to write to.
 * @param size          Number of bytes to write
 * @return 0 if ok, -1 on error
 */
static int cros_ec_flash_write_block(struct cros_ec_dev *dev,
                const uint8_t *data, uint32_t offset, uint32_t size)
{
        struct ec_params_flash_write p;

        p.offset = offset;
        p.size = size;
        assert(data && p.size <= EC_FLASH_WRITE_VER0_SIZE);
        memcpy(&p + 1, data, p.size);

        return ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
                          &p, sizeof(p), NULL, 0) >= 0 ? 0 : -1;
}

/**
 * Return optimal flash write burst size
 */
static int cros_ec_flash_write_burst_size(struct cros_ec_dev *dev)
{
        return EC_FLASH_WRITE_VER0_SIZE;
}

/**
 * Check if a block of data is erased (all 0xff)
 *
 * This function is useful when dealing with flash, for checking whether a
 * data block is erased and thus does not need to be programmed.
 *
 * @param data          Pointer to data to check (must be word-aligned)
 * @param size          Number of bytes to check (must be word-aligned)
 * @return 0 if erased, non-zero if any word is not erased
 */
static int cros_ec_data_is_erased(const uint32_t *data, int size)
{
        assert(!(size & 3));
        size /= sizeof(uint32_t);
        for (; size > 0; size -= 4, data++)
                if (*data != -1U)
                        return 0;

        return 1;
}

int cros_ec_flash_write(struct cros_ec_dev *dev, const uint8_t *data,
                     uint32_t offset, uint32_t size)
{
        uint32_t burst = cros_ec_flash_write_burst_size(dev);
        uint32_t end, off;
        int ret;

        /*
         * TODO: round up to the nearest multiple of write size.  Can get away
         * without that on link right now because its write size is 4 bytes.
         */
        end = offset + size;
        for (off = offset; off < end; off += burst, data += burst) {
                uint32_t todo;

                /* If the data is empty, there is no point in programming it */
                todo = min(end - off, burst);
                if (dev->optimise_flash_write &&
                                cros_ec_data_is_erased((uint32_t *)data, todo))
                        continue;

                ret = cros_ec_flash_write_block(dev, data, off, todo);
                if (ret)
                        return ret;
        }

        return 0;
}

/**
 * Read a single block from the flash
 *
 * Read a block of data from the EC flash. The size must not exceed the flash
 * write block size which you can obtain from cros_ec_flash_write_burst_size().
 *
 * The offset starts at 0. You can obtain the region information from
 * cros_ec_flash_offset() to find out where to read for a particular region.
 *
 * @param dev           CROS-EC device
 * @param data          Pointer to data buffer to read into
 * @param offset        Offset within flash to read from
 * @param size          Number of bytes to read
 * @return 0 if ok, -1 on error
 */
static int cros_ec_flash_read_block(struct cros_ec_dev *dev, uint8_t *data,
                                 uint32_t offset, uint32_t size)
{
        struct ec_params_flash_read p;

        p.offset = offset;
        p.size = size;

        return ec_command(dev, EC_CMD_FLASH_READ, 0,
                          &p, sizeof(p), data, size) >= 0 ? 0 : -1;
}

int cros_ec_flash_read(struct cros_ec_dev *dev, uint8_t *data, uint32_t offset,
                    uint32_t size)
{
        uint32_t burst = cros_ec_flash_write_burst_size(dev);
        uint32_t end, off;
        int ret;

        end = offset + size;
        for (off = offset; off < end; off += burst, data += burst) {
                ret = cros_ec_flash_read_block(dev, data, off,
                                            min(end - off, burst));
                if (ret)
                        return ret;
        }

        return 0;
}

int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
                         const uint8_t *image, int image_size)
{
        uint32_t rw_offset, rw_size;
        int ret;

        if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size))
                return -1;
        if (image_size > (int)rw_size)
                return -1;

        /* Invalidate the existing hash, just in case the AP reboots
         * unexpectedly during the update. If that happened, the EC RW firmware
         * would be invalid, but the EC would still have the original hash.
         */
        ret = cros_ec_invalidate_hash(dev);
        if (ret)
                return ret;

        /*
         * Erase the entire RW section, so that the EC doesn't see any garbage
         * past the new image if it's smaller than the current image.
         *
         * TODO: could optimize this to erase just the current image, since
         * presumably everything past that is 0xff's.  But would still need to
         * round up to the nearest multiple of erase size.
         */
        ret = cros_ec_flash_erase(dev, rw_offset, rw_size);
        if (ret)
                return ret;

        /* Write the image */
        ret = cros_ec_flash_write(dev, image, rw_offset, image_size);
        if (ret)
                return ret;

        return 0;
}

int cros_ec_read_vbnvcontext(struct cros_ec_dev *dev, uint8_t *block)
{
        struct ec_params_vbnvcontext p;
        int len;

        p.op = EC_VBNV_CONTEXT_OP_READ;

        len = ec_command(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
                        &p, sizeof(p), block, EC_VBNV_BLOCK_SIZE);
        if (len < EC_VBNV_BLOCK_SIZE)
                return -1;

        return 0;
}

int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block)
{
        struct ec_params_vbnvcontext p;
        int len;

        p.op = EC_VBNV_CONTEXT_OP_WRITE;
        memcpy(p.block, block, sizeof(p.block));

        len = ec_command_inptr(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
                        &p, sizeof(p), NULL, 0);
        if (len < 0)
                return -1;

        return 0;
}

int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state)
{
        struct ec_params_ldo_set params;

        params.index = index;
        params.state = state;

        if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0,
                       &params, sizeof(params),
                       NULL, 0))
                return -1;

        return 0;
}

int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
{
        struct ec_params_ldo_get params;
        struct ec_response_ldo_get *resp;

        params.index = index;

        if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
                       &params, sizeof(params),
                       (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
                return -1;

        *state = resp->state;

        return 0;
}

/**
 * Decode EC interface details from the device tree and allocate a suitable
 * device.
 *
 * @param blob          Device tree blob
 * @param node          Node to decode from
 * @param devp          Returns a pointer to the new allocated device
 * @return 0 if ok, -1 on error
 */
static int cros_ec_decode_fdt(const void *blob, int node,
                struct cros_ec_dev **devp)
{
        enum fdt_compat_id compat;
        struct cros_ec_dev *dev;
        int parent;

        /* See what type of parent we are inside (this is expensive) */
        parent = fdt_parent_offset(blob, node);
        if (parent < 0) {
                debug("%s: Cannot find node parent\n", __func__);
                return -1;
        }

        dev = &static_dev;
        dev->node = node;
        dev->parent_node = parent;

        compat = fdtdec_lookup(blob, parent);
        switch (compat) {
#ifdef CONFIG_CROS_EC_SPI
        case COMPAT_SAMSUNG_EXYNOS_SPI:
                dev->interface = CROS_EC_IF_SPI;
                if (cros_ec_spi_decode_fdt(dev, blob))
                        return -1;
                break;
#endif
#ifdef CONFIG_CROS_EC_I2C
        case COMPAT_SAMSUNG_S3C2440_I2C:
                dev->interface = CROS_EC_IF_I2C;
                if (cros_ec_i2c_decode_fdt(dev, blob))
                        return -1;
                break;
#endif
#ifdef CONFIG_CROS_EC_LPC
        case COMPAT_INTEL_LPC:
                dev->interface = CROS_EC_IF_LPC;
                break;
#endif
#ifdef CONFIG_CROS_EC_SANDBOX
        case COMPAT_SANDBOX_HOST_EMULATION:
                dev->interface = CROS_EC_IF_SANDBOX;
                break;
#endif
        default:
                debug("%s: Unknown compat id %d\n", __func__, compat);
                return -1;
        }

        fdtdec_decode_gpio(blob, node, "ec-interrupt", &dev->ec_int);
        dev->optimise_flash_write = fdtdec_get_bool(blob, node,
                                                    "optimise-flash-write");
        *devp = dev;

        return 0;
}

int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
{
        char id[MSG_BYTES];
        struct cros_ec_dev *dev;
        int node = 0;

        *cros_ecp = NULL;
        do {
                node = fdtdec_next_compatible(blob, node,
                                              COMPAT_GOOGLE_CROS_EC);
                if (node < 0) {
                        debug("%s: Node not found\n", __func__);
                        return 0;
                }
        } while (!fdtdec_get_is_enabled(blob, node));

        if (cros_ec_decode_fdt(blob, node, &dev)) {
                debug("%s: Failed to decode device.\n", __func__);
                return -CROS_EC_ERR_FDT_DECODE;
        }

        switch (dev->interface) {
#ifdef CONFIG_CROS_EC_SPI
        case CROS_EC_IF_SPI:
                if (cros_ec_spi_init(dev, blob)) {
                        debug("%s: Could not setup SPI interface\n", __func__);
                        return -CROS_EC_ERR_DEV_INIT;
                }
                break;
#endif
#ifdef CONFIG_CROS_EC_I2C
        case CROS_EC_IF_I2C:
                if (cros_ec_i2c_init(dev, blob))
                        return -CROS_EC_ERR_DEV_INIT;
                break;
#endif
#ifdef CONFIG_CROS_EC_LPC
        case CROS_EC_IF_LPC:
                if (cros_ec_lpc_init(dev, blob))
                        return -CROS_EC_ERR_DEV_INIT;
                break;
#endif
#ifdef CONFIG_CROS_EC_SANDBOX
        case CROS_EC_IF_SANDBOX:
                if (cros_ec_sandbox_init(dev, blob))
                        return -CROS_EC_ERR_DEV_INIT;
                break;
#endif
        case CROS_EC_IF_NONE:
        default:
                return 0;
        }

        /* we will poll the EC interrupt line */
        fdtdec_setup_gpio(&dev->ec_int);
        if (fdt_gpio_isvalid(&dev->ec_int))
                gpio_direction_input(dev->ec_int.gpio);

        if (cros_ec_check_version(dev)) {
                debug("%s: Could not detect CROS-EC version\n", __func__);
                return -CROS_EC_ERR_CHECK_VERSION;
        }

        if (cros_ec_read_id(dev, id, sizeof(id))) {
                debug("%s: Could not read KBC ID\n", __func__);
                return -CROS_EC_ERR_READ_ID;
        }

        /* Remember this device for use by the cros_ec command */
        last_dev = *cros_ecp = dev;
        debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id);

        return 0;
}

int cros_ec_decode_region(int argc, char * const argv[])
{
        if (argc > 0) {
                if (0 == strcmp(*argv, "rw"))
                        return EC_FLASH_REGION_RW;
                else if (0 == strcmp(*argv, "ro"))
                        return EC_FLASH_REGION_RO;

                debug("%s: Invalid region '%s'\n", __func__, *argv);
        } else {
                debug("%s: Missing region parameter\n", __func__);
        }

        return -1;
}

int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config)
{
        int flash_node, node;

        node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC);
        if (node < 0) {
                debug("Failed to find chrome-ec node'\n");
                return -1;
        }

        flash_node = fdt_subnode_offset(blob, node, "flash");
        if (flash_node < 0) {
                debug("Failed to find flash node\n");
                return -1;
        }

        if (fdtdec_read_fmap_entry(blob, flash_node, "flash",
                                   &config->flash)) {
                debug("Failed to decode flash node in chrome-ec'\n");
                return -1;
        }

        config->flash_erase_value = fdtdec_get_int(blob, flash_node,
                                                    "erase-value", -1);
        for (node = fdt_first_subnode(blob, flash_node); node >= 0;
             node = fdt_next_subnode(blob, node)) {
                const char *name = fdt_get_name(blob, node, NULL);
                enum ec_flash_region region;

                if (0 == strcmp(name, "ro")) {
                        region = EC_FLASH_REGION_RO;
                } else if (0 == strcmp(name, "rw")) {
                        region = EC_FLASH_REGION_RW;
                } else if (0 == strcmp(name, "wp-ro")) {
                        region = EC_FLASH_REGION_WP_RO;
                } else {
                        debug("Unknown EC flash region name '%s'\n", name);
                        return -1;
                }

                if (fdtdec_read_fmap_entry(blob, node, "reg",
                                           &config->region[region])) {
                        debug("Failed to decode flash region in chrome-ec'\n");
                        return -1;
                }
        }

        return 0;
}

int cros_ec_i2c_xfer(struct cros_ec_dev *dev, uchar chip, uint addr,
                     int alen, uchar *buffer, int len, int is_read)
{
        union {
                struct ec_params_i2c_passthru p;
                uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
        } params;
        union {
                struct ec_response_i2c_passthru r;
                uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
        } response;
        struct ec_params_i2c_passthru *p = &params.p;
        struct ec_response_i2c_passthru *r = &response.r;
        struct ec_params_i2c_passthru_msg *msg = p->msg;
        uint8_t *pdata;
        int read_len, write_len;
        int size;
        int rv;

        p->port = 0;

        if (alen != 1) {
                printf("Unsupported address length %d\n", alen);
                return -1;
        }
        if (is_read) {
                read_len = len;
                write_len = alen;
                p->num_msgs = 2;
        } else {
                read_len = 0;
                write_len = alen + len;
                p->num_msgs = 1;
        }

        size = sizeof(*p) + p->num_msgs * sizeof(*msg);
        if (size + write_len > sizeof(params)) {
                puts("Params too large for buffer\n");
                return -1;
        }
        if (sizeof(*r) + read_len > sizeof(response)) {
                puts("Read length too big for buffer\n");
                return -1;
        }

        /* Create a message to write the register address and optional data */
        pdata = (uint8_t *)p + size;
        msg->addr_flags = chip;
        msg->len = write_len;
        pdata[0] = addr;
        if (!is_read)
                memcpy(pdata + 1, buffer, len);
        msg++;

        if (read_len) {
                msg->addr_flags = chip | EC_I2C_FLAG_READ;
                msg->len = read_len;
        }

        rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, size + write_len,
                        r, sizeof(*r) + read_len);
        if (rv < 0)
                return rv;

        /* Parse response */
        if (r->i2c_status & EC_I2C_STATUS_ERROR) {
                printf("Transfer failed with status=0x%x\n", r->i2c_status);
                return -1;
        }

        if (rv < sizeof(*r) + read_len) {
                puts("Truncated read response\n");
                return -1;
        }

        if (read_len)
                memcpy(buffer, r->data, read_len);

        return 0;
}

#ifdef CONFIG_CMD_CROS_EC

/**
 * Perform a flash read or write command
 *
 * @param dev           CROS-EC device to read/write
 * @param is_write      1 do to a write, 0 to do a read
 * @param argc          Number of arguments
 * @param argv          Arguments (2 is region, 3 is address)
 * @return 0 for ok, 1 for a usage error or -ve for ec command error
 *      (negative EC_RES_...)
 */
static int do_read_write(struct cros_ec_dev *dev, int is_write, int argc,
                         char * const argv[])
{
        uint32_t offset, size = -1U, region_size;
        unsigned long addr;
        char *endp;
        int region;
        int ret;

        region = cros_ec_decode_region(argc - 2, argv + 2);
        if (region == -1)
                return 1;
        if (argc < 4)
                return 1;
        addr = simple_strtoul(argv[3], &endp, 16);
        if (*argv[3] == 0 || *endp != 0)
                return 1;
        if (argc > 4) {
                size = simple_strtoul(argv[4], &endp, 16);
                if (*argv[4] == 0 || *endp != 0)
                        return 1;
        }

        ret = cros_ec_flash_offset(dev, region, &offset, &region_size);
        if (ret) {
                debug("%s: Could not read region info\n", __func__);
                return ret;
        }
        if (size == -1U)
                size = region_size;

        ret = is_write ?
                cros_ec_flash_write(dev, (uint8_t *)addr, offset, size) :
                cros_ec_flash_read(dev, (uint8_t *)addr, offset, size);
        if (ret) {
                debug("%s: Could not %s region\n", __func__,
                      is_write ? "write" : "read");
                return ret;
        }

        return 0;
}

/**
 * get_alen() - Small parser helper function to get address length
 *
 * Returns the address length.
 */
static uint get_alen(char *arg)
{
        int     j;
        int     alen;

        alen = 1;
        for (j = 0; j < 8; j++) {
                if (arg[j] == '.') {
                        alen = arg[j+1] - '0';
                        break;
                } else if (arg[j] == '\0') {
                        break;
                }
        }
        return alen;
}

#define DISP_LINE_LEN   16

/*
 * TODO(sjg@chromium.org): This code copied almost verbatim from cmd_i2c.c
 * so we can remove it later.
 */
static int cros_ec_i2c_md(struct cros_ec_dev *dev, int flag, int argc,
                          char * const argv[])
{
        u_char  chip;
        uint    addr, alen, length = 0x10;
        int     j, nbytes, linebytes;

        if (argc < 2)
                return CMD_RET_USAGE;

        if (1 || (flag & CMD_FLAG_REPEAT) == 0) {
                /*
                 * New command specified.
                 */

                /*
                 * I2C chip address
                 */
                chip = simple_strtoul(argv[0], NULL, 16);

                /*
                 * I2C data address within the chip.  This can be 1 or
                 * 2 bytes long.  Some day it might be 3 bytes long :-).
                 */
                addr = simple_strtoul(argv[1], NULL, 16);
                alen = get_alen(argv[1]);
                if (alen > 3)
                        return CMD_RET_USAGE;

                /*
                 * If another parameter, it is the length to display.
                 * Length is the number of objects, not number of bytes.
                 */
                if (argc > 2)
                        length = simple_strtoul(argv[2], NULL, 16);
        }

        /*
         * Print the lines.
         *
         * We buffer all read data, so we can make sure data is read only
         * once.
         */
        nbytes = length;
        do {
                unsigned char   linebuf[DISP_LINE_LEN];
                unsigned char   *cp;

                linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;

                if (cros_ec_i2c_xfer(dev, chip, addr, alen, linebuf, linebytes,
                                     1))
                        puts("Error reading the chip.\n");
                else {
                        printf("%04x:", addr);
                        cp = linebuf;
                        for (j = 0; j < linebytes; j++) {
                                printf(" %02x", *cp++);
                                addr++;
                        }
                        puts("    ");
                        cp = linebuf;
                        for (j = 0; j < linebytes; j++) {
                                if ((*cp < 0x20) || (*cp > 0x7e))
                                        puts(".");
                                else
                                        printf("%c", *cp);
                                cp++;
                        }
                        putc('\n');
                }
                nbytes -= linebytes;
        } while (nbytes > 0);

        return 0;
}

static int cros_ec_i2c_mw(struct cros_ec_dev *dev, int flag, int argc,
                          char * const argv[])
{
        uchar   chip;
        ulong   addr;
        uint    alen;
        uchar   byte;
        int     count;

        if ((argc < 3) || (argc > 4))
                return CMD_RET_USAGE;

        /*
         * Chip is always specified.
         */
        chip = simple_strtoul(argv[0], NULL, 16);

        /*
         * Address is always specified.
         */
        addr = simple_strtoul(argv[1], NULL, 16);
        alen = get_alen(argv[1]);
        if (alen > 3)
                return CMD_RET_USAGE;

        /*
         * Value to write is always specified.
         */
        byte = simple_strtoul(argv[2], NULL, 16);

        /*
         * Optional count
         */
        if (argc == 4)
                count = simple_strtoul(argv[3], NULL, 16);
        else
                count = 1;

        while (count-- > 0) {
                if (cros_ec_i2c_xfer(dev, chip, addr++, alen, &byte, 1, 0))
                        puts("Error writing the chip.\n");
                /*
                 * Wait for the write to complete.  The write can take
                 * up to 10mSec (we allow a little more time).
                 */
/*
 * No write delay with FRAM devices.
 */
#if !defined(CONFIG_SYS_I2C_FRAM)
                udelay(11000);
#endif
        }

        return 0;
}

/* Temporary code until we have driver model and can use the i2c command */
static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
                                   int argc, char * const argv[])
{
        const char *cmd;

        if (argc < 1)
                return CMD_RET_USAGE;
        cmd = *argv++;
        argc--;
        if (0 == strcmp("md", cmd))
                cros_ec_i2c_md(dev, flag, argc, argv);
        else if (0 == strcmp("mw", cmd))
                cros_ec_i2c_mw(dev, flag, argc, argv);
        else
                return CMD_RET_USAGE;

        return 0;
}

static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        struct cros_ec_dev *dev = last_dev;
        const char *cmd;
        int ret = 0;

        if (argc < 2)
                return CMD_RET_USAGE;

        cmd = argv[1];
        if (0 == strcmp("init", cmd)) {
                ret = cros_ec_init(gd->fdt_blob, &dev);
                if (ret) {
                        printf("Could not init cros_ec device (err %d)\n", ret);
                        return 1;
                }
                return 0;
        }

        /* Just use the last allocated device; there should be only one */
        if (!last_dev) {
                printf("No CROS-EC device available\n");
                return 1;
        }
        if (0 == strcmp("id", cmd)) {
                char id[MSG_BYTES];

                if (cros_ec_read_id(dev, id, sizeof(id))) {
                        debug("%s: Could not read KBC ID\n", __func__);
                        return 1;
                }
                printf("%s\n", id);
        } else if (0 == strcmp("info", cmd)) {
                struct ec_response_mkbp_info info;

                if (cros_ec_info(dev, &info)) {
                        debug("%s: Could not read KBC info\n", __func__);
                        return 1;
                }
                printf("rows     = %u\n", info.rows);
                printf("cols     = %u\n", info.cols);
                printf("switches = %#x\n", info.switches);
        } else if (0 == strcmp("curimage", cmd)) {
                enum ec_current_image image;

                if (cros_ec_read_current_image(dev, &image)) {
                        debug("%s: Could not read KBC image\n", __func__);
                        return 1;
                }
                printf("%d\n", image);
        } else if (0 == strcmp("hash", cmd)) {
                struct ec_response_vboot_hash hash;
                int i;

                if (cros_ec_read_hash(dev, &hash)) {
                        debug("%s: Could not read KBC hash\n", __func__);
                        return 1;
                }

                if (hash.hash_type == EC_VBOOT_HASH_TYPE_SHA256)
                        printf("type:    SHA-256\n");
                else
                        printf("type:    %d\n", hash.hash_type);

                printf("offset:  0x%08x\n", hash.offset);
                printf("size:    0x%08x\n", hash.size);

                printf("digest:  ");
                for (i = 0; i < hash.digest_size; i++)
                        printf("%02x", hash.hash_digest[i]);
                printf("\n");
        } else if (0 == strcmp("reboot", cmd)) {
                int region;
                enum ec_reboot_cmd cmd;

                if (argc >= 3 && !strcmp(argv[2], "cold"))
                        cmd = EC_REBOOT_COLD;
                else {
                        region = cros_ec_decode_region(argc - 2, argv + 2);
                        if (region == EC_FLASH_REGION_RO)
                                cmd = EC_REBOOT_JUMP_RO;
                        else if (region == EC_FLASH_REGION_RW)
                                cmd = EC_REBOOT_JUMP_RW;
                        else
                                return CMD_RET_USAGE;
                }

                if (cros_ec_reboot(dev, cmd, 0)) {
                        debug("%s: Could not reboot KBC\n", __func__);
                        return 1;
                }
        } else if (0 == strcmp("events", cmd)) {
                uint32_t events;

                if (cros_ec_get_host_events(dev, &events)) {
                        debug("%s: Could not read host events\n", __func__);
                        return 1;
                }
                printf("0x%08x\n", events);
        } else if (0 == strcmp("clrevents", cmd)) {
                uint32_t events = 0x7fffffff;

                if (argc >= 3)
                        events = simple_strtol(argv[2], NULL, 0);

                if (cros_ec_clear_host_events(dev, events)) {
                        debug("%s: Could not clear host events\n", __func__);
                        return 1;
                }
        } else if (0 == strcmp("read", cmd)) {
                ret = do_read_write(dev, 0, argc, argv);
                if (ret > 0)
                        return CMD_RET_USAGE;
        } else if (0 == strcmp("write", cmd)) {
                ret = do_read_write(dev, 1, argc, argv);
                if (ret > 0)
                        return CMD_RET_USAGE;
        } else if (0 == strcmp("erase", cmd)) {
                int region = cros_ec_decode_region(argc - 2, argv + 2);
                uint32_t offset, size;

                if (region == -1)
                        return CMD_RET_USAGE;
                if (cros_ec_flash_offset(dev, region, &offset, &size)) {
                        debug("%s: Could not read region info\n", __func__);
                        ret = -1;
                } else {
                        ret = cros_ec_flash_erase(dev, offset, size);
                        if (ret) {
                                debug("%s: Could not erase region\n",
                                      __func__);
                        }
                }
        } else if (0 == strcmp("regioninfo", cmd)) {
                int region = cros_ec_decode_region(argc - 2, argv + 2);
                uint32_t offset, size;

                if (region == -1)
                        return CMD_RET_USAGE;
                ret = cros_ec_flash_offset(dev, region, &offset, &size);
                if (ret) {
                        debug("%s: Could not read region info\n", __func__);
                } else {
                        printf("Region: %s\n", region == EC_FLASH_REGION_RO ?
                                        "RO" : "RW");
                        printf("Offset: %x\n", offset);
                        printf("Size:   %x\n", size);
                }
        } else if (0 == strcmp("vbnvcontext", cmd)) {
                uint8_t block[EC_VBNV_BLOCK_SIZE];
                char buf[3];
                int i, len;
                unsigned long result;

                if (argc <= 2) {
                        ret = cros_ec_read_vbnvcontext(dev, block);
                        if (!ret) {
                                printf("vbnv_block: ");
                                for (i = 0; i < EC_VBNV_BLOCK_SIZE; i++)
                                        printf("%02x", block[i]);
                                putc('\n');
                        }
                } else {
                        /*
                         * TODO(clchiou): Move this to a utility function as
                         * cmd_spi might want to call it.
                         */
                        memset(block, 0, EC_VBNV_BLOCK_SIZE);
                        len = strlen(argv[2]);
                        buf[2] = '\0';
                        for (i = 0; i < EC_VBNV_BLOCK_SIZE; i++) {
                                if (i * 2 >= len)
                                        break;
                                buf[0] = argv[2][i * 2];
                                if (i * 2 + 1 >= len)
                                        buf[1] = '0';
                                else
                                        buf[1] = argv[2][i * 2 + 1];
                                strict_strtoul(buf, 16, &result);
                                block[i] = result;
                        }
                        ret = cros_ec_write_vbnvcontext(dev, block);
                }
                if (ret) {
                        debug("%s: Could not %s VbNvContext\n", __func__,
                                        argc <= 2 ?  "read" : "write");
                }
        } else if (0 == strcmp("test", cmd)) {
                int result = cros_ec_test(dev);

                if (result)
                        printf("Test failed with error %d\n", result);
                else
                        puts("Test passed\n");
        } else if (0 == strcmp("version", cmd)) {
                struct ec_response_get_version *p;
                char *build_string;

                ret = cros_ec_read_version(dev, &p);
                if (!ret) {
                        /* Print versions */
                        printf("RO version:    %1.*s\n",
                               (int)sizeof(p->version_string_ro),
                               p->version_string_ro);
                        printf("RW version:    %1.*s\n",
                               (int)sizeof(p->version_string_rw),
                               p->version_string_rw);
                        printf("Firmware copy: %s\n",
                                (p->current_image <
                                        ARRAY_SIZE(ec_current_image_name) ?
                                ec_current_image_name[p->current_image] :
                                "?"));
                        ret = cros_ec_read_build_info(dev, &build_string);
                        if (!ret)
                                printf("Build info:    %s\n", build_string);
                }
        } else if (0 == strcmp("ldo", cmd)) {
                uint8_t index, state;
                char *endp;

                if (argc < 3)
                        return CMD_RET_USAGE;
                index = simple_strtoul(argv[2], &endp, 10);
                if (*argv[2] == 0 || *endp != 0)
                        return CMD_RET_USAGE;
                if (argc > 3) {
                        state = simple_strtoul(argv[3], &endp, 10);
                        if (*argv[3] == 0 || *endp != 0)
                                return CMD_RET_USAGE;
                        ret = cros_ec_set_ldo(dev, index, state);
                } else {
                        ret = cros_ec_get_ldo(dev, index, &state);
                        if (!ret) {
                                printf("LDO%d: %s\n", index,
                                        state == EC_LDO_STATE_ON ?
                                        "on" : "off");
                        }
                }

                if (ret) {
                        debug("%s: Could not access LDO%d\n", __func__, index);
                        return ret;
                }
        } else if (0 == strcmp("i2c", cmd)) {
                ret = cros_ec_i2c_passthrough(dev, flag, argc - 2, argv + 2);
        } else {
                return CMD_RET_USAGE;
        }

        if (ret < 0) {
                printf("Error: CROS-EC command failed (error %d)\n", ret);
                ret = 1;
        }

        return ret;
}

U_BOOT_CMD(
        crosec, 6,      1,      do_cros_ec,
        "CROS-EC utility command",
        "init                Re-init CROS-EC (done on startup automatically)\n"
        "crosec id                  Read CROS-EC ID\n"
        "crosec info                Read CROS-EC info\n"
        "crosec curimage            Read CROS-EC current image\n"
        "crosec hash                Read CROS-EC hash\n"
        "crosec reboot [rw | ro | cold]  Reboot CROS-EC\n"
        "crosec events              Read CROS-EC host events\n"
        "crosec clrevents [mask]    Clear CROS-EC host events\n"
        "crosec regioninfo <ro|rw>  Read image info\n"
        "crosec erase <ro|rw>       Erase EC image\n"
        "crosec read <ro|rw> <addr> [<size>]   Read EC image\n"
        "crosec write <ro|rw> <addr> [<size>]  Write EC image\n"
        "crosec vbnvcontext [hexstring]        Read [write] VbNvContext from EC\n"
        "crosec ldo <idx> [<state>] Switch/Read LDO state\n"
        "crosec test                run tests on cros_ec\n"
        "crosec version             Read CROS-EC version\n"
        "crosec i2c md chip address[.0, .1, .2] [# of objects] - read from I2C passthru\n"
        "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)"
);
#endif