arm: vf610: fix double iomux configuration for vf610twr board
[u-boot/qq2440-u-boot.git] / drivers / usb / host / ehci-atmel.c
blob9ffe5010be959270f6e483d8572bff4141a0d475
1 /*
2 * (C) Copyright 2012
3 * Atmel Semiconductor <www.atmel.com>
4 * Written-by: Bo Shen <voice.shen@atmel.com>
6 * SPDX-License-Identifier: GPL-2.0+
7 */
9 #include <common.h>
10 #include <watchdog.h>
11 #include <usb.h>
12 #include <asm/io.h>
13 #include <asm/arch/hardware.h>
14 #include <asm/arch/at91_pmc.h>
15 #include <asm/arch/clk.h>
17 #include "ehci.h"
19 /* Enable UTMI PLL time out 500us
20 * 10 times as datasheet specified
22 #define EN_UPLL_TIMEOUT 500UL
24 int ehci_hcd_init(int index, enum usb_init_type init,
25 struct ehci_hccr **hccr, struct ehci_hcor **hcor)
27 at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
28 ulong start_time, tmp_time;
30 start_time = get_timer(0);
31 /* Enable UTMI PLL */
32 writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
33 while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) {
34 WATCHDOG_RESET();
35 tmp_time = get_timer(0);
36 if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
37 printf("ERROR: failed to enable UPLL\n");
38 return -1;
42 /* Enable USB Host clock */
43 writel(1 << ATMEL_ID_UHPHS, &pmc->pcer);
45 *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI;
46 *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
47 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
49 return 0;
52 int ehci_hcd_stop(int index)
54 at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
55 ulong start_time, tmp_time;
57 /* Disable USB Host Clock */
58 writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr);
60 start_time = get_timer(0);
61 /* Disable UTMI PLL */
62 writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr);
63 while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) {
64 WATCHDOG_RESET();
65 tmp_time = get_timer(0);
66 if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) {
67 printf("ERROR: failed to stop UPLL\n");
68 return -1;
72 return 0;