coregrind/m_gdbserver/gdb/signals.h

   1 /* Target signal numbers for GDB and the GDB remote protocol.
   2    Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
   3    1997, 1998, 1999, 2000, 2001, 2002
   4    Free Software Foundation, Inc.
   5
   6    This file is part of GDB.
   7    It has been modified to integrate it in valgrind
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 2 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, see <http://www.gnu.org/licenses/>.
  21 */
  22
  23 #ifndef GDB_SIGNALS_H
  24 #define GDB_SIGNALS_H
  25
  26 /* The numbering of these signals is chosen to match traditional unix
  27    signals (insofar as various unices use the same numbers, anyway).
  28    It is also the numbering of the GDB remote protocol.  Other remote
  29    protocols, if they use a different numbering, should make sure to
  30    translate appropriately.
  31
  32    Since these numbers have actually made it out into other software
  33    (stubs, etc.), you mustn't disturb the assigned numbering.  If you
  34    need to add new signals here, add them to the end of the explicitly
  35    numbered signals, at the comment marker.  Add them unconditionally,
  36    not within any #if or #ifdef.
  37
  38    This is based strongly on Unix/POSIX signals for several reasons:
  39    (1) This set of signals represents a widely-accepted attempt to
  40    represent events of this sort in a portable fashion, (2) we want a
  41    signal to make it from wait to child_wait to the user intact, (3) many
  42    remote protocols use a similar encoding.  However, it is
  43    recognized that this set of signals has limitations (such as not
  44    distinguishing between various kinds of SIGSEGV, or not
  45    distinguishing hitting a breakpoint from finishing a single step).
  46    So in the future we may get around this either by adding additional
  47    signals for breakpoint, single-step, etc., or by adding signal
  48    codes; the latter seems more in the spirit of what BSD, System V,
  49    etc. are doing to address these issues.  */
  50
  51 /* For an explanation of what each signal means, see
  52    signals.c.  */
  53
  54 enum target_signal
  55   {
  56     /* Used some places (e.g. stop_signal) to record the concept that
  57        there is no signal.  */
  58     TARGET_SIGNAL_0 = 0,
  59     TARGET_SIGNAL_FIRST = 0,
  60     TARGET_SIGNAL_HUP = 1,
  61     TARGET_SIGNAL_INT = 2,
  62     TARGET_SIGNAL_QUIT = 3,
  63     TARGET_SIGNAL_ILL = 4,
  64     TARGET_SIGNAL_TRAP = 5,
  65     TARGET_SIGNAL_ABRT = 6,
  66     TARGET_SIGNAL_EMT = 7,
  67     TARGET_SIGNAL_FPE = 8,
  68     TARGET_SIGNAL_KILL = 9,
  69     TARGET_SIGNAL_BUS = 10,
  70     TARGET_SIGNAL_SEGV = 11,
  71     TARGET_SIGNAL_SYS = 12,
  72     TARGET_SIGNAL_PIPE = 13,
  73     TARGET_SIGNAL_ALRM = 14,
  74     TARGET_SIGNAL_TERM = 15,
  75     TARGET_SIGNAL_URG = 16,
  76     TARGET_SIGNAL_STOP = 17,
  77     TARGET_SIGNAL_TSTP = 18,
  78     TARGET_SIGNAL_CONT = 19,
  79     TARGET_SIGNAL_CHLD = 20,
  80     TARGET_SIGNAL_TTIN = 21,
  81     TARGET_SIGNAL_TTOU = 22,
  82     TARGET_SIGNAL_IO = 23,
  83     TARGET_SIGNAL_XCPU = 24,
  84     TARGET_SIGNAL_XFSZ = 25,
  85     TARGET_SIGNAL_VTALRM = 26,
  86     TARGET_SIGNAL_PROF = 27,
  87     TARGET_SIGNAL_WINCH = 28,
  88     TARGET_SIGNAL_LOST = 29,
  89     TARGET_SIGNAL_USR1 = 30,
  90     TARGET_SIGNAL_USR2 = 31,
  91     TARGET_SIGNAL_PWR = 32,
  92     /* Similar to SIGIO.  Perhaps they should have the same number.  */
  93     TARGET_SIGNAL_POLL = 33,
  94     TARGET_SIGNAL_WIND = 34,
  95     TARGET_SIGNAL_PHONE = 35,
  96     TARGET_SIGNAL_WAITING = 36,
  97     TARGET_SIGNAL_LWP = 37,
  98     TARGET_SIGNAL_DANGER = 38,
  99     TARGET_SIGNAL_GRANT = 39,
 100     TARGET_SIGNAL_RETRACT = 40,
 101     TARGET_SIGNAL_MSG = 41,
 102     TARGET_SIGNAL_SOUND = 42,
 103     TARGET_SIGNAL_SAK = 43,
 104     TARGET_SIGNAL_PRIO = 44,
 105     TARGET_SIGNAL_REALTIME_33 = 45,
 106     TARGET_SIGNAL_REALTIME_34 = 46,
 107     TARGET_SIGNAL_REALTIME_35 = 47,
 108     TARGET_SIGNAL_REALTIME_36 = 48,
 109     TARGET_SIGNAL_REALTIME_37 = 49,
 110     TARGET_SIGNAL_REALTIME_38 = 50,
 111     TARGET_SIGNAL_REALTIME_39 = 51,
 112     TARGET_SIGNAL_REALTIME_40 = 52,
 113     TARGET_SIGNAL_REALTIME_41 = 53,
 114     TARGET_SIGNAL_REALTIME_42 = 54,
 115     TARGET_SIGNAL_REALTIME_43 = 55,
 116     TARGET_SIGNAL_REALTIME_44 = 56,
 117     TARGET_SIGNAL_REALTIME_45 = 57,
 118     TARGET_SIGNAL_REALTIME_46 = 58,
 119     TARGET_SIGNAL_REALTIME_47 = 59,
 120     TARGET_SIGNAL_REALTIME_48 = 60,
 121     TARGET_SIGNAL_REALTIME_49 = 61,
 122     TARGET_SIGNAL_REALTIME_50 = 62,
 123     TARGET_SIGNAL_REALTIME_51 = 63,
 124     TARGET_SIGNAL_REALTIME_52 = 64,
 125     TARGET_SIGNAL_REALTIME_53 = 65,
 126     TARGET_SIGNAL_REALTIME_54 = 66,
 127     TARGET_SIGNAL_REALTIME_55 = 67,
 128     TARGET_SIGNAL_REALTIME_56 = 68,
 129     TARGET_SIGNAL_REALTIME_57 = 69,
 130     TARGET_SIGNAL_REALTIME_58 = 70,
 131     TARGET_SIGNAL_REALTIME_59 = 71,
 132     TARGET_SIGNAL_REALTIME_60 = 72,
 133     TARGET_SIGNAL_REALTIME_61 = 73,
 134     TARGET_SIGNAL_REALTIME_62 = 74,
 135     TARGET_SIGNAL_REALTIME_63 = 75,
 136
 137     /* Used internally by Solaris threads.  See signal(5) on Solaris.  */
 138     TARGET_SIGNAL_CANCEL = 76,
 139
 140     /* Yes, this pains me, too.  But LynxOS didn't have SIG32, and now
 141        GNU/Linux does, and we can't disturb the numbering, since it's
 142        part of the remote protocol.  Note that in some GDB's
 143        TARGET_SIGNAL_REALTIME_32 is number 76.  */
 144     TARGET_SIGNAL_REALTIME_32,
 145     /* Yet another pain, IRIX 6 has SIG64. */
 146     TARGET_SIGNAL_REALTIME_64,
 147     /* Yet another pain, GNU/Linux MIPS might go up to 128. */
 148     TARGET_SIGNAL_REALTIME_65,
 149     TARGET_SIGNAL_REALTIME_66,
 150     TARGET_SIGNAL_REALTIME_67,
 151     TARGET_SIGNAL_REALTIME_68,
 152     TARGET_SIGNAL_REALTIME_69,
 153     TARGET_SIGNAL_REALTIME_70,
 154     TARGET_SIGNAL_REALTIME_71,
 155     TARGET_SIGNAL_REALTIME_72,
 156     TARGET_SIGNAL_REALTIME_73,
 157     TARGET_SIGNAL_REALTIME_74,
 158     TARGET_SIGNAL_REALTIME_75,
 159     TARGET_SIGNAL_REALTIME_76,
 160     TARGET_SIGNAL_REALTIME_77,
 161     TARGET_SIGNAL_REALTIME_78,
 162     TARGET_SIGNAL_REALTIME_79,
 163     TARGET_SIGNAL_REALTIME_80,
 164     TARGET_SIGNAL_REALTIME_81,
 165     TARGET_SIGNAL_REALTIME_82,
 166     TARGET_SIGNAL_REALTIME_83,
 167     TARGET_SIGNAL_REALTIME_84,
 168     TARGET_SIGNAL_REALTIME_85,
 169     TARGET_SIGNAL_REALTIME_86,
 170     TARGET_SIGNAL_REALTIME_87,
 171     TARGET_SIGNAL_REALTIME_88,
 172     TARGET_SIGNAL_REALTIME_89,
 173     TARGET_SIGNAL_REALTIME_90,
 174     TARGET_SIGNAL_REALTIME_91,
 175     TARGET_SIGNAL_REALTIME_92,
 176     TARGET_SIGNAL_REALTIME_93,
 177     TARGET_SIGNAL_REALTIME_94,
 178     TARGET_SIGNAL_REALTIME_95,
 179     TARGET_SIGNAL_REALTIME_96,
 180     TARGET_SIGNAL_REALTIME_97,
 181     TARGET_SIGNAL_REALTIME_98,
 182     TARGET_SIGNAL_REALTIME_99,
 183     TARGET_SIGNAL_REALTIME_100,
 184     TARGET_SIGNAL_REALTIME_101,
 185     TARGET_SIGNAL_REALTIME_102,
 186     TARGET_SIGNAL_REALTIME_103,
 187     TARGET_SIGNAL_REALTIME_104,
 188     TARGET_SIGNAL_REALTIME_105,
 189     TARGET_SIGNAL_REALTIME_106,
 190     TARGET_SIGNAL_REALTIME_107,
 191     TARGET_SIGNAL_REALTIME_108,
 192     TARGET_SIGNAL_REALTIME_109,
 193     TARGET_SIGNAL_REALTIME_110,
 194     TARGET_SIGNAL_REALTIME_111,
 195     TARGET_SIGNAL_REALTIME_112,
 196     TARGET_SIGNAL_REALTIME_113,
 197     TARGET_SIGNAL_REALTIME_114,
 198     TARGET_SIGNAL_REALTIME_115,
 199     TARGET_SIGNAL_REALTIME_116,
 200     TARGET_SIGNAL_REALTIME_117,
 201     TARGET_SIGNAL_REALTIME_118,
 202     TARGET_SIGNAL_REALTIME_119,
 203     TARGET_SIGNAL_REALTIME_120,
 204     TARGET_SIGNAL_REALTIME_121,
 205     TARGET_SIGNAL_REALTIME_122,
 206     TARGET_SIGNAL_REALTIME_123,
 207     TARGET_SIGNAL_REALTIME_124,
 208     TARGET_SIGNAL_REALTIME_125,
 209     TARGET_SIGNAL_REALTIME_126,
 210     TARGET_SIGNAL_REALTIME_127,
 211
 212     TARGET_SIGNAL_INFO,
 213
 214     /* Some signal we don't know about.  */
 215     TARGET_SIGNAL_UNKNOWN,
 216
 217     /* Use whatever signal we use when one is not specifically specified
 218        (for passing to proceed and so on).  */
 219     TARGET_SIGNAL_DEFAULT,
 220
 221     /* Mach exceptions.  In versions of GDB before 5.2, these were just before
 222        TARGET_SIGNAL_INFO if you were compiling on a Mach host (and missing
 223        otherwise).  */
 224     TARGET_EXC_BAD_ACCESS,
 225     TARGET_EXC_BAD_INSTRUCTION,
 226     TARGET_EXC_ARITHMETIC,
 227     TARGET_EXC_EMULATION,
 228     TARGET_EXC_SOFTWARE,
 229     TARGET_EXC_BREAKPOINT,
 230
 231     TARGET_SIGNAL_LIBRT,
 232
 233     /* If you are adding a new signal, add it just above this comment.  */
 234
 235
 236
 237     /* Last and unused enum value, for sizing arrays, etc.  */
 238     TARGET_SIGNAL_LAST
 239   };
 240
 241 #endif /* #ifndef GDB_SIGNALS_H */