drivers/ata/pata_cmd640.c

   1 /*
   2  * pata_cmd640.c        - CMD640 PCI PATA for new ATA layer
   3  *                        (C) 2007 Red Hat Inc
   4  *                        Alan Cox <alan@redhat.com>
   5  *
   6  * Based upon
   7  *  linux/drivers/ide/pci/cmd640.c              Version 1.02  Sep 01, 1996
   8  *
   9  *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
  10  *
  11  *      This drives only the PCI version of the controller. If you have a
  12  *      VLB one then we have enough docs to support it but you can write
  13  *      your own code.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/pci.h>
  19 #include <linux/init.h>
  20 #include <linux/blkdev.h>
  21 #include <linux/delay.h>
  22 #include <scsi/scsi_host.h>
  23 #include <linux/libata.h>
  24
  25 #define DRV_NAME "pata_cmd640"
  26 #define DRV_VERSION "0.0.5"
  27
  28 struct cmd640_reg {
  29         int last;
  30         u8 reg58[ATA_MAX_DEVICES];
  31 };
  32
  33 enum {
  34         CFR = 0x50,
  35         CNTRL = 0x51,
  36         CMDTIM = 0x52,
  37         ARTIM0 = 0x53,
  38         DRWTIM0 = 0x54,
  39         ARTIM23 = 0x57,
  40         DRWTIM23 = 0x58,
  41         BRST = 0x59
  42 };
  43
  44 /**
  45  *      cmd640_set_piomode      -       set initial PIO mode data
  46  *      @ap: ATA port
  47  *      @adev: ATA device
  48  *
  49  *      Called to do the PIO mode setup.
  50  */
  51
  52 static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
  53 {
  54         struct cmd640_reg *timing = ap->private_data;
  55         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  56         struct ata_timing t;
  57         const unsigned long T = 1000000 / 33;
  58         const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
  59         u8 reg;
  60         int arttim = ARTIM0 + 2 * adev->devno;
  61         struct ata_device *pair = ata_dev_pair(adev);
  62
  63         if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
  64                 printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
  65                 return;
  66         }
  67
  68         /* The second channel has shared timings and the setup timing is
  69            messy to switch to merge it for worst case */
  70         if (ap->port_no && pair) {
  71                 struct ata_timing p;
  72                 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
  73                 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
  74         }
  75
  76         /* Make the timings fit */
  77         if (t.recover > 16) {
  78                 t.active += t.recover - 16;
  79                 t.recover = 16;
  80         }
  81         if (t.active > 16)
  82                 t.active = 16;
  83
  84         /* Now convert the clocks into values we can actually stuff into
  85            the chip */
  86
  87         if (t.recover > 1)
  88                 t.recover--;    /* 640B only */
  89         else
  90                 t.recover = 15;
  91
  92         if (t.setup > 4)
  93                 t.setup = 0xC0;
  94         else
  95                 t.setup = setup_data[t.setup];
  96
  97         if (ap->port_no == 0) {
  98                 t.active &= 0x0F;       /* 0 = 16 */
  99
 100                 /* Load setup timing */
 101                 pci_read_config_byte(pdev, arttim, &reg);
 102                 reg &= 0x3F;
 103                 reg |= t.setup;
 104                 pci_write_config_byte(pdev, arttim, reg);
 105
 106                 /* Load active/recovery */
 107                 pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
 108         } else {
 109                 /* Save the shared timings for channel, they will be loaded
 110                    by qc_issue_prot. Reloading the setup time is expensive
 111                    so we keep a merged one loaded */
 112                 pci_read_config_byte(pdev, ARTIM23, &reg);
 113                 reg &= 0x3F;
 114                 reg |= t.setup;
 115                 pci_write_config_byte(pdev, ARTIM23, reg);
 116                 timing->reg58[adev->devno] = (t.active << 4) | t.recover;
 117         }
 118 }
 119
 120
 121 /**
 122  *      cmd640_qc_issue_prot    -       command preparation hook
 123  *      @qc: Command to be issued
 124  *
 125  *      Channel 1 has shared timings. We must reprogram the
 126  *      clock each drive 2/3 switch we do.
 127  */
 128
 129 static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
 130 {
 131         struct ata_port *ap = qc->ap;
 132         struct ata_device *adev = qc->dev;
 133         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 134         struct cmd640_reg *timing = ap->private_data;
 135
 136         if (ap->port_no != 0 && adev->devno != timing->last) {
 137                 pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
 138                 timing->last = adev->devno;
 139         }
 140         return ata_qc_issue_prot(qc);
 141 }
 142
 143 /**
 144  *      cmd640_port_start       -       port setup
 145  *      @ap: ATA port being set up
 146  *
 147  *      The CMD640 needs to maintain private data structures so we
 148  *      allocate space here.
 149  */
 150
 151 static int cmd640_port_start(struct ata_port *ap)
 152 {
 153         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 154         struct cmd640_reg *timing;
 155
 156         int ret = ata_port_start(ap);
 157         if (ret < 0)
 158                 return ret;
 159
 160         timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
 161         if (timing == NULL)
 162                 return -ENOMEM;
 163         timing->last = -1;      /* Force a load */
 164         ap->private_data = timing;
 165         return ret;
 166 }
 167
 168 static struct scsi_host_template cmd640_sht = {
 169         .module                 = THIS_MODULE,
 170         .name                   = DRV_NAME,
 171         .ioctl                  = ata_scsi_ioctl,
 172         .queuecommand           = ata_scsi_queuecmd,
 173         .can_queue              = ATA_DEF_QUEUE,
 174         .this_id                = ATA_SHT_THIS_ID,
 175         .sg_tablesize           = LIBATA_MAX_PRD,
 176         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
 177         .emulated               = ATA_SHT_EMULATED,
 178         .use_clustering         = ATA_SHT_USE_CLUSTERING,
 179         .proc_name              = DRV_NAME,
 180         .dma_boundary           = ATA_DMA_BOUNDARY,
 181         .slave_configure        = ata_scsi_slave_config,
 182         .slave_destroy          = ata_scsi_slave_destroy,
 183         .bios_param             = ata_std_bios_param,
 184 #ifdef CONFIG_PM
 185         .resume                 = ata_scsi_device_resume,
 186         .suspend                = ata_scsi_device_suspend,
 187 #endif
 188 };
 189
 190 static struct ata_port_operations cmd640_port_ops = {
 191         .port_disable   = ata_port_disable,
 192         .set_piomode    = cmd640_set_piomode,
 193         .mode_filter    = ata_pci_default_filter,
 194         .tf_load        = ata_tf_load,
 195         .tf_read        = ata_tf_read,
 196         .check_status   = ata_check_status,
 197         .exec_command   = ata_exec_command,
 198         .dev_select     = ata_std_dev_select,
 199
 200         .freeze         = ata_bmdma_freeze,
 201         .thaw           = ata_bmdma_thaw,
 202         .error_handler  = ata_bmdma_error_handler,
 203         .post_internal_cmd = ata_bmdma_post_internal_cmd,
 204         .cable_detect   = ata_cable_40wire,
 205
 206         .bmdma_setup    = ata_bmdma_setup,
 207         .bmdma_start    = ata_bmdma_start,
 208         .bmdma_stop     = ata_bmdma_stop,
 209         .bmdma_status   = ata_bmdma_status,
 210
 211         .qc_prep        = ata_qc_prep,
 212         .qc_issue       = cmd640_qc_issue_prot,
 213
 214         /* In theory this is not needed once we kill the prefetcher */
 215         .data_xfer      = ata_data_xfer_noirq,
 216
 217         .irq_handler    = ata_interrupt,
 218         .irq_clear      = ata_bmdma_irq_clear,
 219         .irq_on         = ata_irq_on,
 220         .irq_ack        = ata_irq_ack,
 221
 222         .port_start     = cmd640_port_start,
 223 };
 224
 225 static void cmd640_hardware_init(struct pci_dev *pdev)
 226 {
 227         u8 r;
 228         u8 ctrl;
 229
 230         /* CMD640 detected, commiserations */
 231         pci_write_config_byte(pdev, 0x5B, 0x00);
 232         /* Get version info */
 233         pci_read_config_byte(pdev, CFR, &r);
 234         /* PIO0 command cycles */
 235         pci_write_config_byte(pdev, CMDTIM, 0);
 236         /* 512 byte bursts (sector) */
 237         pci_write_config_byte(pdev, BRST, 0x40);
 238         /*
 239          * A reporter a long time ago
 240          * Had problems with the data fifo
 241          * So don't run the risk
 242          * Of putting crap on the disk
 243          * For its better just to go slow
 244          */
 245         /* Do channel 0 */
 246         pci_read_config_byte(pdev, CNTRL, &ctrl);
 247         pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
 248         /* Ditto for channel 1 */
 249         pci_read_config_byte(pdev, ARTIM23, &ctrl);
 250         ctrl |= 0x0C;
 251         pci_write_config_byte(pdev, ARTIM23, ctrl);
 252 }
 253
 254 static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 255 {
 256         static struct ata_port_info info = {
 257                 .sht = &cmd640_sht,
 258                 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 259                 .pio_mask = 0x1f,
 260                 .port_ops = &cmd640_port_ops
 261         };
 262
 263         static struct ata_port_info *port_info[2] = { &info, &info };
 264
 265         cmd640_hardware_init(pdev);
 266         return ata_pci_init_one(pdev, port_info, 2);
 267 }
 268
 269 static int cmd640_reinit_one(struct pci_dev *pdev)
 270 {
 271         cmd640_hardware_init(pdev);
 272 #ifdef CONFIG_PM
 273         return ata_pci_device_resume(pdev);
 274 #else
 275         return 0;
 276 #endif
 277 }
 278
 279 static const struct pci_device_id cmd640[] = {
 280         { PCI_VDEVICE(CMD, 0x640), 0 },
 281         { },
 282 };
 283
 284 static struct pci_driver cmd640_pci_driver = {
 285         .name           = DRV_NAME,
 286         .id_table       = cmd640,
 287         .probe          = cmd640_init_one,
 288         .remove         = ata_pci_remove_one,
 289 #ifdef CONFIG_PM
 290         .suspend        = ata_pci_device_suspend,
 291 #endif
 292         .resume         = cmd640_reinit_one,
 293 };
 294
 295 static int __init cmd640_init(void)
 296 {
 297         return pci_register_driver(&cmd640_pci_driver);
 298 }
 299
 300 static void __exit cmd640_exit(void)
 301 {
 302         pci_unregister_driver(&cmd640_pci_driver);
 303 }
 304
 305 MODULE_AUTHOR("Alan Cox");
 306 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
 307 MODULE_LICENSE("GPL");
 308 MODULE_DEVICE_TABLE(pci, cmd640);
 309 MODULE_VERSION(DRV_VERSION);
 310
 311 module_init(cmd640_init);
 312 module_exit(cmd640_exit);