?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Blackfin arch: Add label to call new GPIO API
[wrt350n-kernel.git] / drivers / net / smc91x.h
blob6ff3a1627af87112ea87cca3f7ca7dd952c3a2e7
1 /*------------------------------------------------------------------------
2 . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device.
3 .
4 . Copyright (C) 1996 by Erik Stahlman
5 . Copyright (C) 2001 Standard Microsystems Corporation
6 . Developed by Simple Network Magic Corporation
7 . Copyright (C) 2003 Monta Vista Software, Inc.
8 . Unified SMC91x driver by Nicolas Pitre
9 .
10 . This program is free software; you can redistribute it and/or modify
11 . it under the terms of the GNU General Public License as published by
12 . the Free Software Foundation; either version 2 of the License, or
13 . (at your option) any later version.
14 .
15 . This program is distributed in the hope that it will be useful,
16 . but WITHOUT ANY WARRANTY; without even the implied warranty of
17 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 . GNU General Public License for more details.
19 .
20 . You should have received a copy of the GNU General Public License
21 . along with this program; if not, write to the Free Software
22 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 .
24 . Information contained in this file was obtained from the LAN91C111
25 . manual from SMC. To get a copy, if you really want one, you can find
26 . information under www.smsc.com.
27 .
28 . Authors
29 . Erik Stahlman <erik@vt.edu>
30 . Daris A Nevil <dnevil@snmc.com>
31 . Nicolas Pitre <nico@cam.org>
32 .
33 ---------------------------------------------------------------------------*/
34 #ifndef _SMC91X_H_
35 #define _SMC91X_H_
36
37
38 /*
39 * Define your architecture specific bus configuration parameters here.
40 */
41
42 #if defined(CONFIG_ARCH_LUBBOCK)
43
44 /* We can only do 16-bit reads and writes in the static memory space. */
45 #define SMC_CAN_USE_8BIT 0
46 #define SMC_CAN_USE_16BIT 1
47 #define SMC_CAN_USE_32BIT 0
48 #define SMC_NOWAIT 1
49
50 /* The first two address lines aren't connected... */
51 #define SMC_IO_SHIFT 2
52
53 #define SMC_inw(a, r) readw((a) + (r))
54 #define SMC_outw(v, a, r) writew(v, (a) + (r))
55 #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
56 #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
57
58 #elif defined(CONFIG_BFIN)
59
60 #define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
61 #define RPC_LSA_DEFAULT RPC_LED_100_10
62 #define RPC_LSB_DEFAULT RPC_LED_TX_RX
63
64 # if defined (CONFIG_BFIN561_EZKIT)
65 #define SMC_CAN_USE_8BIT 0
66 #define SMC_CAN_USE_16BIT 1
67 #define SMC_CAN_USE_32BIT 1
68 #define SMC_IO_SHIFT 0
69 #define SMC_NOWAIT 1
70 #define SMC_USE_BFIN_DMA 0
71
72
73 #define SMC_inw(a, r) readw((a) + (r))
74 #define SMC_outw(v, a, r) writew(v, (a) + (r))
75 #define SMC_inl(a, r) readl((a) + (r))
76 #define SMC_outl(v, a, r) writel(v, (a) + (r))
77 #define SMC_outsl(a, r, p, l) outsl((unsigned long *)((a) + (r)), p, l)
78 #define SMC_insl(a, r, p, l) insl ((unsigned long *)((a) + (r)), p, l)
79 # else
80 #define SMC_CAN_USE_8BIT 0
81 #define SMC_CAN_USE_16BIT 1
82 #define SMC_CAN_USE_32BIT 0
83 #define SMC_IO_SHIFT 0
84 #define SMC_NOWAIT 1
85 #define SMC_USE_BFIN_DMA 0
86
87
88 #define SMC_inw(a, r) readw((a) + (r))
89 #define SMC_outw(v, a, r) writew(v, (a) + (r))
90 #define SMC_outsw(a, r, p, l) outsw((unsigned long *)((a) + (r)), p, l)
91 #define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
92 # endif
93 /* check if the mac in reg is valid */
94 #define SMC_GET_MAC_ADDR(addr) \
95 do { \
96 unsigned int __v; \
97 __v = SMC_inw(ioaddr, ADDR0_REG); \
98 addr[0] = __v; addr[1] = __v >> 8; \
99 __v = SMC_inw(ioaddr, ADDR1_REG); \
100 addr[2] = __v; addr[3] = __v >> 8; \
101 __v = SMC_inw(ioaddr, ADDR2_REG); \
102 addr[4] = __v; addr[5] = __v >> 8; \
103 if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
104 random_ether_addr(addr); \
105 } \
106 } while (0)
107 #elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
108
109 /* We can only do 16-bit reads and writes in the static memory space. */
110 #define SMC_CAN_USE_8BIT 0
111 #define SMC_CAN_USE_16BIT 1
112 #define SMC_CAN_USE_32BIT 0
113 #define SMC_NOWAIT 1
114
115 #define SMC_IO_SHIFT 0
116
117 #define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r)))
118 #define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v)
119 #define SMC_insw(a, r, p, l) \
120 do { \
121 unsigned long __port = (a) + (r); \
122 u16 *__p = (u16 *)(p); \
123 int __l = (l); \
124 insw(__port, __p, __l); \
125 while (__l > 0) { \
126 *__p = swab16(*__p); \
127 __p++; \
128 __l--; \
129 } \
130 } while (0)
131 #define SMC_outsw(a, r, p, l) \
132 do { \
133 unsigned long __port = (a) + (r); \
134 u16 *__p = (u16 *)(p); \
135 int __l = (l); \
136 while (__l > 0) { \
137 /* Believe it or not, the swab isn't needed. */ \
138 outw( /* swab16 */ (*__p++), __port); \
139 __l--; \
140 } \
141 } while (0)
142 #define SMC_IRQ_FLAGS (0)
143
144 #elif defined(CONFIG_SA1100_PLEB)
145 /* We can only do 16-bit reads and writes in the static memory space. */
146 #define SMC_CAN_USE_8BIT 1
147 #define SMC_CAN_USE_16BIT 1
148 #define SMC_CAN_USE_32BIT 0
149 #define SMC_IO_SHIFT 0
150 #define SMC_NOWAIT 1
151
152 #define SMC_inb(a, r) readb((a) + (r))
153 #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
154 #define SMC_inw(a, r) readw((a) + (r))
155 #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
156 #define SMC_outb(v, a, r) writeb(v, (a) + (r))
157 #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
158 #define SMC_outw(v, a, r) writew(v, (a) + (r))
159 #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
160
161 #define SMC_IRQ_FLAGS (0)
162
163 #elif defined(CONFIG_SA1100_ASSABET)
164
165 #include <asm/arch/neponset.h>
166
167 /* We can only do 8-bit reads and writes in the static memory space. */
168 #define SMC_CAN_USE_8BIT 1
169 #define SMC_CAN_USE_16BIT 0
170 #define SMC_CAN_USE_32BIT 0
171 #define SMC_NOWAIT 1
172
173 /* The first two address lines aren't connected... */
174 #define SMC_IO_SHIFT 2
175
176 #define SMC_inb(a, r) readb((a) + (r))
177 #define SMC_outb(v, a, r) writeb(v, (a) + (r))
178 #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
179 #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
180
181 #elif defined(CONFIG_MACH_LOGICPD_PXA270)
182
183 #define SMC_CAN_USE_8BIT 0
184 #define SMC_CAN_USE_16BIT 1
185 #define SMC_CAN_USE_32BIT 0
186 #define SMC_IO_SHIFT 0
187 #define SMC_NOWAIT 1
188
189 #define SMC_inw(a, r) readw((a) + (r))
190 #define SMC_outw(v, a, r) writew(v, (a) + (r))
191 #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
192 #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
193
194 #elif defined(CONFIG_ARCH_INNOKOM) || \
195 defined(CONFIG_MACH_MAINSTONE) || \
196 defined(CONFIG_ARCH_PXA_IDP) || \
197 defined(CONFIG_ARCH_RAMSES)
198
199 #define SMC_CAN_USE_8BIT 1
200 #define SMC_CAN_USE_16BIT 1
201 #define SMC_CAN_USE_32BIT 1
202 #define SMC_IO_SHIFT 0
203 #define SMC_NOWAIT 1
204 #define SMC_USE_PXA_DMA 1
205
206 #define SMC_inb(a, r) readb((a) + (r))
207 #define SMC_inw(a, r) readw((a) + (r))
208 #define SMC_inl(a, r) readl((a) + (r))
209 #define SMC_outb(v, a, r) writeb(v, (a) + (r))
210 #define SMC_outl(v, a, r) writel(v, (a) + (r))
211 #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
212 #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
213
214 /* We actually can't write halfwords properly if not word aligned */
215 static inline void
216 SMC_outw(u16 val, void __iomem *ioaddr, int reg)
217 {
218 if (reg & 2) {
219 unsigned int v = val << 16;
220 v |= readl(ioaddr + (reg & ~2)) & 0xffff;
221 writel(v, ioaddr + (reg & ~2));
222 } else {
223 writew(val, ioaddr + reg);
224 }
225 }
226
227 #elif defined(CONFIG_ARCH_OMAP)
228
229 /* We can only do 16-bit reads and writes in the static memory space. */
230 #define SMC_CAN_USE_8BIT 0
231 #define SMC_CAN_USE_16BIT 1
232 #define SMC_CAN_USE_32BIT 0
233 #define SMC_IO_SHIFT 0
234 #define SMC_NOWAIT 1
235
236 #define SMC_inw(a, r) readw((a) + (r))
237 #define SMC_outw(v, a, r) writew(v, (a) + (r))
238 #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
239 #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
240
241 #include <asm/mach-types.h>
242 #include <asm/arch/cpu.h>
243
244 #define SMC_IRQ_FLAGS (( \
245 machine_is_omap_h2() \
246 || machine_is_omap_h3() \
247 || machine_is_omap_h4() \
248 || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
249 ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING)
250
251
252 #elif defined(CONFIG_SH_SH4202_MICRODEV)
253
254 #define SMC_CAN_USE_8BIT 0
255 #define SMC_CAN_USE_16BIT 1
256 #define SMC_CAN_USE_32BIT 0
257
258 #define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
259 #define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
260 #define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
261 #define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
262 #define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
263 #define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
264 #define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
265 #define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
266 #define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
267 #define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
268
269 #define SMC_IRQ_FLAGS (0)
270
271 #elif defined(CONFIG_ISA)
272
273 #define SMC_CAN_USE_8BIT 1
274 #define SMC_CAN_USE_16BIT 1
275 #define SMC_CAN_USE_32BIT 0
276
277 #define SMC_inb(a, r) inb((a) + (r))
278 #define SMC_inw(a, r) inw((a) + (r))
279 #define SMC_outb(v, a, r) outb(v, (a) + (r))
280 #define SMC_outw(v, a, r) outw(v, (a) + (r))
281 #define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
282 #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
283
284 #elif defined(CONFIG_SUPERH)
285
286 #ifdef CONFIG_SOLUTION_ENGINE
287 #define SMC_CAN_USE_8BIT 0
288 #define SMC_CAN_USE_16BIT 1
289 #define SMC_CAN_USE_32BIT 0
290 #define SMC_IO_SHIFT 0
291 #define SMC_NOWAIT 1
292
293 #define SMC_inw(a, r) inw((a) + (r))
294 #define SMC_outw(v, a, r) outw(v, (a) + (r))
295 #define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
296 #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
297
298 #else /* BOARDS */
299
300 #define SMC_CAN_USE_8BIT 1
301 #define SMC_CAN_USE_16BIT 1
302 #define SMC_CAN_USE_32BIT 0
303
304 #define SMC_inb(a, r) inb((a) + (r))
305 #define SMC_inw(a, r) inw((a) + (r))
306 #define SMC_outb(v, a, r) outb(v, (a) + (r))
307 #define SMC_outw(v, a, r) outw(v, (a) + (r))
308 #define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
309 #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
310
311 #endif /* BOARDS */
312
313 #elif defined(CONFIG_M32R)
314
315 #define SMC_CAN_USE_8BIT 0
316 #define SMC_CAN_USE_16BIT 1
317 #define SMC_CAN_USE_32BIT 0
318
319 #define SMC_inb(a, r) inb(((u32)a) + (r))
320 #define SMC_inw(a, r) inw(((u32)a) + (r))
321 #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
322 #define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
323 #define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
324 #define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
325
326 #define SMC_IRQ_FLAGS (0)
327
328 #define RPC_LSA_DEFAULT RPC_LED_TX_RX
329 #define RPC_LSB_DEFAULT RPC_LED_100_10
330
331 #elif defined(CONFIG_MACH_LPD79520) \
332 || defined(CONFIG_MACH_LPD7A400) \
333 || defined(CONFIG_MACH_LPD7A404)
334
335 /* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the
336 * way that the CPU handles chip selects and the way that the SMC chip
337 * expects the chip select to operate. Refer to
338 * Documentation/arm/Sharp-LH/IOBarrier for details. The read from
339 * IOBARRIER is a byte, in order that we read the least-common
340 * denominator. It would be wasteful to read 32 bits from an 8-bit
341 * accessible region.
342 *
343 * There is no explicit protection against interrupts intervening
344 * between the writew and the IOBARRIER. In SMC ISR there is a
345 * preamble that performs an IOBARRIER in the extremely unlikely event
346 * that the driver interrupts itself between a writew to the chip an
347 * the IOBARRIER that follows *and* the cache is large enough that the
348 * first off-chip access while handing the interrupt is to the SMC
349 * chip. Other devices in the same address space as the SMC chip must
350 * be aware of the potential for trouble and perform a similar
351 * IOBARRIER on entry to their ISR.
352 */
353
354 #include <asm/arch/constants.h> /* IOBARRIER_VIRT */
355
356 #define SMC_CAN_USE_8BIT 0
357 #define SMC_CAN_USE_16BIT 1
358 #define SMC_CAN_USE_32BIT 0
359 #define SMC_NOWAIT 0
360 #define LPD7X_IOBARRIER readb (IOBARRIER_VIRT)
361
362 #define SMC_inw(a,r)\
363 ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; })
364 #define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; })
365
366 #define SMC_insw LPD7_SMC_insw
367 static inline void LPD7_SMC_insw (unsigned char* a, int r,
368 unsigned char* p, int l)
369 {
370 unsigned short* ps = (unsigned short*) p;
371 while (l-- > 0) {
372 *ps++ = readw (a + r);
373 LPD7X_IOBARRIER;
374 }
375 }
376
377 #define SMC_outsw LPD7_SMC_outsw
378 static inline void LPD7_SMC_outsw (unsigned char* a, int r,
379 unsigned char* p, int l)
380 {
381 unsigned short* ps = (unsigned short*) p;
382 while (l-- > 0) {
383 writew (*ps++, a + r);
384 LPD7X_IOBARRIER;
385 }
386 }
387
388 #define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER
389
390 #define RPC_LSA_DEFAULT RPC_LED_TX_RX
391 #define RPC_LSB_DEFAULT RPC_LED_100_10
392
393 #elif defined(CONFIG_SOC_AU1X00)
394
395 #include <au1xxx.h>
396
397 /* We can only do 16-bit reads and writes in the static memory space. */
398 #define SMC_CAN_USE_8BIT 0
399 #define SMC_CAN_USE_16BIT 1
400 #define SMC_CAN_USE_32BIT 0
401 #define SMC_IO_SHIFT 0
402 #define SMC_NOWAIT 1
403
404 #define SMC_inw(a, r) au_readw((unsigned long)((a) + (r)))
405 #define SMC_insw(a, r, p, l) \
406 do { \
407 unsigned long _a = (unsigned long)((a) + (r)); \
408 int _l = (l); \
409 u16 *_p = (u16 *)(p); \
410 while (_l-- > 0) \
411 *_p++ = au_readw(_a); \
412 } while(0)
413 #define SMC_outw(v, a, r) au_writew(v, (unsigned long)((a) + (r)))
414 #define SMC_outsw(a, r, p, l) \
415 do { \
416 unsigned long _a = (unsigned long)((a) + (r)); \
417 int _l = (l); \
418 const u16 *_p = (const u16 *)(p); \
419 while (_l-- > 0) \
420 au_writew(*_p++ , _a); \
421 } while(0)
422
423 #define SMC_IRQ_FLAGS (0)
424
425 #elif defined(CONFIG_ARCH_VERSATILE)
426
427 #define SMC_CAN_USE_8BIT 1
428 #define SMC_CAN_USE_16BIT 1
429 #define SMC_CAN_USE_32BIT 1
430 #define SMC_NOWAIT 1
431
432 #define SMC_inb(a, r) readb((a) + (r))
433 #define SMC_inw(a, r) readw((a) + (r))
434 #define SMC_inl(a, r) readl((a) + (r))
435 #define SMC_outb(v, a, r) writeb(v, (a) + (r))
436 #define SMC_outw(v, a, r) writew(v, (a) + (r))
437 #define SMC_outl(v, a, r) writel(v, (a) + (r))
438 #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
439 #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
440
441 #define SMC_IRQ_FLAGS (0)
442
443 #else
444
445 #define SMC_CAN_USE_8BIT 1
446 #define SMC_CAN_USE_16BIT 1
447 #define SMC_CAN_USE_32BIT 1
448 #define SMC_NOWAIT 1
449
450 #define SMC_inb(a, r) readb((a) + (r))
451 #define SMC_inw(a, r) readw((a) + (r))
452 #define SMC_inl(a, r) readl((a) + (r))
453 #define SMC_outb(v, a, r) writeb(v, (a) + (r))
454 #define SMC_outw(v, a, r) writew(v, (a) + (r))
455 #define SMC_outl(v, a, r) writel(v, (a) + (r))
456 #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
457 #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
458
459 #define RPC_LSA_DEFAULT RPC_LED_100_10
460 #define RPC_LSB_DEFAULT RPC_LED_TX_RX
461
462 #endif
463
464 #ifdef SMC_USE_PXA_DMA
465 /*
466 * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
467 * always happening in irq context so no need to worry about races. TX is
468 * different and probably not worth it for that reason, and not as critical
469 * as RX which can overrun memory and lose packets.
470 */
471 #include <linux/dma-mapping.h>
472 #include <asm/dma.h>
473 #include <asm/arch/pxa-regs.h>
474
475 #ifdef SMC_insl
476 #undef SMC_insl
477 #define SMC_insl(a, r, p, l) \
478 smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
479 static inline void
480 smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
481 u_char *buf, int len)
482 {
483 dma_addr_t dmabuf;
484
485 /* fallback if no DMA available */
486 if (dma == (unsigned char)-1) {
487 readsl(ioaddr + reg, buf, len);
488 return;
489 }
490
491 /* 64 bit alignment is required for memory to memory DMA */
492 if ((long)buf & 4) {
493 *((u32 *)buf) = SMC_inl(ioaddr, reg);
494 buf += 4;
495 len--;
496 }
497
498 len *= 4;
499 dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
500 DCSR(dma) = DCSR_NODESC;
501 DTADR(dma) = dmabuf;
502 DSADR(dma) = physaddr + reg;
503 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
504 DCMD_WIDTH4 | (DCMD_LENGTH & len));
505 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
506 while (!(DCSR(dma) & DCSR_STOPSTATE))
507 cpu_relax();
508 DCSR(dma) = 0;
509 dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
510 }
511 #endif
512
513 #ifdef SMC_insw
514 #undef SMC_insw
515 #define SMC_insw(a, r, p, l) \
516 smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
517 static inline void
518 smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
519 u_char *buf, int len)
520 {
521 dma_addr_t dmabuf;
522
523 /* fallback if no DMA available */
524 if (dma == (unsigned char)-1) {
525 readsw(ioaddr + reg, buf, len);
526 return;
527 }
528
529 /* 64 bit alignment is required for memory to memory DMA */
530 while ((long)buf & 6) {
531 *((u16 *)buf) = SMC_inw(ioaddr, reg);
532 buf += 2;
533 len--;
534 }
535
536 len *= 2;
537 dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
538 DCSR(dma) = DCSR_NODESC;
539 DTADR(dma) = dmabuf;
540 DSADR(dma) = physaddr + reg;
541 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
542 DCMD_WIDTH2 | (DCMD_LENGTH & len));
543 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
544 while (!(DCSR(dma) & DCSR_STOPSTATE))
545 cpu_relax();
546 DCSR(dma) = 0;
547 dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
548 }
549 #endif
550
551 static void
552 smc_pxa_dma_irq(int dma, void *dummy)
553 {
554 DCSR(dma) = 0;
555 }
556 #endif /* SMC_USE_PXA_DMA */
557
558
559 /*
560 * Everything a particular hardware setup needs should have been defined
561 * at this point. Add stubs for the undefined cases, mainly to avoid
562 * compilation warnings since they'll be optimized away, or to prevent buggy
563 * use of them.
564 */
565
566 #if ! SMC_CAN_USE_32BIT
567 #define SMC_inl(ioaddr, reg) ({ BUG(); 0; })
568 #define SMC_outl(x, ioaddr, reg) BUG()
569 #define SMC_insl(a, r, p, l) BUG()
570 #define SMC_outsl(a, r, p, l) BUG()
571 #endif
572
573 #if !defined(SMC_insl) || !defined(SMC_outsl)
574 #define SMC_insl(a, r, p, l) BUG()
575 #define SMC_outsl(a, r, p, l) BUG()
576 #endif
577
578 #if ! SMC_CAN_USE_16BIT
579
580 /*
581 * Any 16-bit access is performed with two 8-bit accesses if the hardware
582 * can't do it directly. Most registers are 16-bit so those are mandatory.
583 */
584 #define SMC_outw(x, ioaddr, reg) \
585 do { \
586 unsigned int __val16 = (x); \
587 SMC_outb( __val16, ioaddr, reg ); \
588 SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
589 } while (0)
590 #define SMC_inw(ioaddr, reg) \
591 ({ \
592 unsigned int __val16; \
593 __val16 = SMC_inb( ioaddr, reg ); \
594 __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
595 __val16; \
596 })
597
598 #define SMC_insw(a, r, p, l) BUG()
599 #define SMC_outsw(a, r, p, l) BUG()
600
601 #endif
602
603 #if !defined(SMC_insw) || !defined(SMC_outsw)
604 #define SMC_insw(a, r, p, l) BUG()
605 #define SMC_outsw(a, r, p, l) BUG()
606 #endif
607
608 #if ! SMC_CAN_USE_8BIT
609 #define SMC_inb(ioaddr, reg) ({ BUG(); 0; })
610 #define SMC_outb(x, ioaddr, reg) BUG()
611 #define SMC_insb(a, r, p, l) BUG()
612 #define SMC_outsb(a, r, p, l) BUG()
613 #endif
614
615 #if !defined(SMC_insb) || !defined(SMC_outsb)
616 #define SMC_insb(a, r, p, l) BUG()
617 #define SMC_outsb(a, r, p, l) BUG()
618 #endif
619
620 #ifndef SMC_CAN_USE_DATACS
621 #define SMC_CAN_USE_DATACS 0
622 #endif
623
624 #ifndef SMC_IO_SHIFT
625 #define SMC_IO_SHIFT 0
626 #endif
627
628 #ifndef SMC_IRQ_FLAGS
629 #define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING
630 #endif
631
632 #ifndef SMC_INTERRUPT_PREAMBLE
633 #define SMC_INTERRUPT_PREAMBLE
634 #endif
635
636
637 /* Because of bank switching, the LAN91x uses only 16 I/O ports */
638 #define SMC_IO_EXTENT (16 << SMC_IO_SHIFT)
639 #define SMC_DATA_EXTENT (4)
640
641 /*
642 . Bank Select Register:
643 .
644 . yyyy yyyy 0000 00xx
645 . xx = bank number
646 . yyyy yyyy = 0x33, for identification purposes.
647 */
648 #define BANK_SELECT (14 << SMC_IO_SHIFT)
649
650
651 // Transmit Control Register
652 /* BANK 0 */
653 #define TCR_REG SMC_REG(0x0000, 0)
654 #define TCR_ENABLE 0x0001 // When 1 we can transmit
655 #define TCR_LOOP 0x0002 // Controls output pin LBK
656 #define TCR_FORCOL 0x0004 // When 1 will force a collision
657 #define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0
658 #define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames
659 #define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier
660 #define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation
661 #define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error
662 #define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback
663 #define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode
664
665 #define TCR_CLEAR 0 /* do NOTHING */
666 /* the default settings for the TCR register : */
667 #define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN)
668
669
670 // EPH Status Register
671 /* BANK 0 */
672 #define EPH_STATUS_REG SMC_REG(0x0002, 0)
673 #define ES_TX_SUC 0x0001 // Last TX was successful
674 #define ES_SNGL_COL 0x0002 // Single collision detected for last tx
675 #define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx
676 #define ES_LTX_MULT 0x0008 // Last tx was a multicast
677 #define ES_16COL 0x0010 // 16 Collisions Reached
678 #define ES_SQET 0x0020 // Signal Quality Error Test
679 #define ES_LTXBRD 0x0040 // Last tx was a broadcast
680 #define ES_TXDEFR 0x0080 // Transmit Deferred
681 #define ES_LATCOL 0x0200 // Late collision detected on last tx
682 #define ES_LOSTCARR 0x0400 // Lost Carrier Sense
683 #define ES_EXC_DEF 0x0800 // Excessive Deferral
684 #define ES_CTR_ROL 0x1000 // Counter Roll Over indication
685 #define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin
686 #define ES_TXUNRN 0x8000 // Tx Underrun
687
688
689 // Receive Control Register
690 /* BANK 0 */
691 #define RCR_REG SMC_REG(0x0004, 0)
692 #define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted
693 #define RCR_PRMS 0x0002 // Enable promiscuous mode
694 #define RCR_ALMUL 0x0004 // When set accepts all multicast frames
695 #define RCR_RXEN 0x0100 // IFF this is set, we can receive packets
696 #define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets
697 #define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision
698 #define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier
699 #define RCR_SOFTRST 0x8000 // resets the chip
700
701 /* the normal settings for the RCR register : */
702 #define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
703 #define RCR_CLEAR 0x0 // set it to a base state
704
705
706 // Counter Register
707 /* BANK 0 */
708 #define COUNTER_REG SMC_REG(0x0006, 0)
709
710
711 // Memory Information Register
712 /* BANK 0 */
713 #define MIR_REG SMC_REG(0x0008, 0)
714
715
716 // Receive/Phy Control Register
717 /* BANK 0 */
718 #define RPC_REG SMC_REG(0x000A, 0)
719 #define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode.
720 #define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode
721 #define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
722 #define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
723 #define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
724 #define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
725 #define RPC_LED_RES (0x01) // LED = Reserved
726 #define RPC_LED_10 (0x02) // LED = 10Mbps link detect
727 #define RPC_LED_FD (0x03) // LED = Full Duplex Mode
728 #define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
729 #define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
730 #define RPC_LED_TX (0x06) // LED = TX packet occurred
731 #define RPC_LED_RX (0x07) // LED = RX packet occurred
732
733 #ifndef RPC_LSA_DEFAULT
734 #define RPC_LSA_DEFAULT RPC_LED_100
735 #endif
736 #ifndef RPC_LSB_DEFAULT
737 #define RPC_LSB_DEFAULT RPC_LED_FD
738 #endif
739
740 #define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
741
742
743 /* Bank 0 0x0C is reserved */
744
745 // Bank Select Register
746 /* All Banks */
747 #define BSR_REG 0x000E
748
749
750 // Configuration Reg
751 /* BANK 1 */
752 #define CONFIG_REG SMC_REG(0x0000, 1)
753 #define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy
754 #define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL
755 #define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus
756 #define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode.
757
758 // Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low
759 #define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
760
761
762 // Base Address Register
763 /* BANK 1 */
764 #define BASE_REG SMC_REG(0x0002, 1)
765
766
767 // Individual Address Registers
768 /* BANK 1 */
769 #define ADDR0_REG SMC_REG(0x0004, 1)
770 #define ADDR1_REG SMC_REG(0x0006, 1)
771 #define ADDR2_REG SMC_REG(0x0008, 1)
772
773
774 // General Purpose Register
775 /* BANK 1 */
776 #define GP_REG SMC_REG(0x000A, 1)
777
778
779 // Control Register
780 /* BANK 1 */
781 #define CTL_REG SMC_REG(0x000C, 1)
782 #define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received
783 #define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
784 #define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt
785 #define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt
786 #define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt
787 #define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store
788 #define CTL_RELOAD 0x0002 // When set reads EEPROM into registers
789 #define CTL_STORE 0x0001 // When set stores registers into EEPROM
790
791
792 // MMU Command Register
793 /* BANK 2 */
794 #define MMU_CMD_REG SMC_REG(0x0000, 2)
795 #define MC_BUSY 1 // When 1 the last release has not completed
796 #define MC_NOP (0<<5) // No Op
797 #define MC_ALLOC (1<<5) // OR with number of 256 byte packets
798 #define MC_RESET (2<<5) // Reset MMU to initial state
799 #define MC_REMOVE (3<<5) // Remove the current rx packet
800 #define MC_RELEASE (4<<5) // Remove and release the current rx packet
801 #define MC_FREEPKT (5<<5) // Release packet in PNR register
802 #define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit
803 #define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs
804
805
806 // Packet Number Register
807 /* BANK 2 */
808 #define PN_REG SMC_REG(0x0002, 2)
809
810
811 // Allocation Result Register
812 /* BANK 2 */
813 #define AR_REG SMC_REG(0x0003, 2)
814 #define AR_FAILED 0x80 // Alocation Failed
815
816
817 // TX FIFO Ports Register
818 /* BANK 2 */
819 #define TXFIFO_REG SMC_REG(0x0004, 2)
820 #define TXFIFO_TEMPTY 0x80 // TX FIFO Empty
821
822 // RX FIFO Ports Register
823 /* BANK 2 */
824 #define RXFIFO_REG SMC_REG(0x0005, 2)
825 #define RXFIFO_REMPTY 0x80 // RX FIFO Empty
826
827 #define FIFO_REG SMC_REG(0x0004, 2)
828
829 // Pointer Register
830 /* BANK 2 */
831 #define PTR_REG SMC_REG(0x0006, 2)
832 #define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area
833 #define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access
834 #define PTR_READ 0x2000 // When 1 the operation is a read
835
836
837 // Data Register
838 /* BANK 2 */
839 #define DATA_REG SMC_REG(0x0008, 2)
840
841
842 // Interrupt Status/Acknowledge Register
843 /* BANK 2 */
844 #define INT_REG SMC_REG(0x000C, 2)
845
846
847 // Interrupt Mask Register
848 /* BANK 2 */
849 #define IM_REG SMC_REG(0x000D, 2)
850 #define IM_MDINT 0x80 // PHY MI Register 18 Interrupt
851 #define IM_ERCV_INT 0x40 // Early Receive Interrupt
852 #define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section
853 #define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns
854 #define IM_ALLOC_INT 0x08 // Set when allocation request is completed
855 #define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty
856 #define IM_TX_INT 0x02 // Transmit Interrupt
857 #define IM_RCV_INT 0x01 // Receive Interrupt
858
859
860 // Multicast Table Registers
861 /* BANK 3 */
862 #define MCAST_REG1 SMC_REG(0x0000, 3)
863 #define MCAST_REG2 SMC_REG(0x0002, 3)
864 #define MCAST_REG3 SMC_REG(0x0004, 3)
865 #define MCAST_REG4 SMC_REG(0x0006, 3)
866
867
868 // Management Interface Register (MII)
869 /* BANK 3 */
870 #define MII_REG SMC_REG(0x0008, 3)
871 #define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup
872 #define MII_MDOE 0x0008 // MII Output Enable
873 #define MII_MCLK 0x0004 // MII Clock, pin MDCLK
874 #define MII_MDI 0x0002 // MII Input, pin MDI
875 #define MII_MDO 0x0001 // MII Output, pin MDO
876
877
878 // Revision Register
879 /* BANK 3 */
880 /* ( hi: chip id low: rev # ) */
881 #define REV_REG SMC_REG(0x000A, 3)
882
883
884 // Early RCV Register
885 /* BANK 3 */
886 /* this is NOT on SMC9192 */
887 #define ERCV_REG SMC_REG(0x000C, 3)
888 #define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
889 #define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask
890
891
892 // External Register
893 /* BANK 7 */
894 #define EXT_REG SMC_REG(0x0000, 7)
895
896
897 #define CHIP_9192 3
898 #define CHIP_9194 4
899 #define CHIP_9195 5
900 #define CHIP_9196 6
901 #define CHIP_91100 7
902 #define CHIP_91100FD 8
903 #define CHIP_91111FD 9
904
905 static const char * chip_ids[ 16 ] = {
906 NULL, NULL, NULL,
907 /* 3 */ "SMC91C90/91C92",
908 /* 4 */ "SMC91C94",
909 /* 5 */ "SMC91C95",
910 /* 6 */ "SMC91C96",
911 /* 7 */ "SMC91C100",
912 /* 8 */ "SMC91C100FD",
913 /* 9 */ "SMC91C11xFD",
914 NULL, NULL, NULL,
915 NULL, NULL, NULL};
916
917
918 /*
919 . Receive status bits
920 */
921 #define RS_ALGNERR 0x8000
922 #define RS_BRODCAST 0x4000
923 #define RS_BADCRC 0x2000
924 #define RS_ODDFRAME 0x1000
925 #define RS_TOOLONG 0x0800
926 #define RS_TOOSHORT 0x0400
927 #define RS_MULTICAST 0x0001
928 #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
929
930
931 /*
932 * PHY IDs
933 * LAN83C183 == LAN91C111 Internal PHY
934 */
935 #define PHY_LAN83C183 0x0016f840
936 #define PHY_LAN83C180 0x02821c50
937
938 /*
939 * PHY Register Addresses (LAN91C111 Internal PHY)
940 *
941 * Generic PHY registers can be found in <linux/mii.h>
942 *
943 * These phy registers are specific to our on-board phy.
944 */
945
946 // PHY Configuration Register 1
947 #define PHY_CFG1_REG 0x10
948 #define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled
949 #define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled
950 #define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down
951 #define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler
952 #define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable
953 #define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled
954 #define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm)
955 #define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db
956 #define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust
957 #define PHY_CFG1_TLVL_MASK 0x003C
958 #define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time
959
960
961 // PHY Configuration Register 2
962 #define PHY_CFG2_REG 0x11
963 #define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled
964 #define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled
965 #define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt)
966 #define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo
967
968 // PHY Status Output (and Interrupt status) Register
969 #define PHY_INT_REG 0x12 // Status Output (Interrupt Status)
970 #define PHY_INT_INT 0x8000 // 1=bits have changed since last read
971 #define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected
972 #define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync
973 #define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx
974 #define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx
975 #define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx
976 #define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected
977 #define PHY_INT_JAB 0x0100 // 1=Jabber detected
978 #define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode
979 #define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex
980
981 // PHY Interrupt/Status Mask Register
982 #define PHY_MASK_REG 0x13 // Interrupt Mask
983 // Uses the same bit definitions as PHY_INT_REG
984
985
986 /*
987 * SMC91C96 ethernet config and status registers.
988 * These are in the "attribute" space.
989 */
990 #define ECOR 0x8000
991 #define ECOR_RESET 0x80
992 #define ECOR_LEVEL_IRQ 0x40
993 #define ECOR_WR_ATTRIB 0x04
994 #define ECOR_ENABLE 0x01
995
996 #define ECSR 0x8002
997 #define ECSR_IOIS8 0x20
998 #define ECSR_PWRDWN 0x04
999 #define ECSR_INT 0x02
1000
1001 #define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT)
1002
1003
1004 /*
1005 * Macros to abstract register access according to the data bus
1006 * capabilities. Please use those and not the in/out primitives.
1007 * Note: the following macros do *not* select the bank -- this must
1008 * be done separately as needed in the main code. The SMC_REG() macro
1009 * only uses the bank argument for debugging purposes (when enabled).
1010 *
1011 * Note: despite inline functions being safer, everything leading to this
1012 * should preferably be macros to let BUG() display the line number in
1013 * the core source code since we're interested in the top call site
1014 * not in any inline function location.
1015 */
1016
1017 #if SMC_DEBUG > 0
1018 #define SMC_REG(reg, bank) \
1019 ({ \
1020 int __b = SMC_CURRENT_BANK(); \
1021 if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \
1022 printk( "%s: bank reg screwed (0x%04x)\n", \
1023 CARDNAME, __b ); \
1024 BUG(); \
1025 } \
1026 reg<<SMC_IO_SHIFT; \
1027 })
1028 #else
1029 #define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT)
1030 #endif
1031
1032 /*
1033 * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
1034 * aligned to a 32 bit boundary. I tell you that does exist!
1035 * Fortunately the affected register accesses can be easily worked around
1036 * since we can write zeroes to the preceeding 16 bits without adverse
1037 * effects and use a 32-bit access.
1038 *
1039 * Enforce it on any 32-bit capable setup for now.
1040 */
1041 #define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT
1042
1043 #define SMC_GET_PN() \
1044 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \
1045 : (SMC_inw(ioaddr, PN_REG) & 0xFF) )
1046
1047 #define SMC_SET_PN(x) \
1048 do { \
1049 if (SMC_MUST_ALIGN_WRITE) \
1050 SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \
1051 else if (SMC_CAN_USE_8BIT) \
1052 SMC_outb(x, ioaddr, PN_REG); \
1053 else \
1054 SMC_outw(x, ioaddr, PN_REG); \
1055 } while (0)
1056
1057 #define SMC_GET_AR() \
1058 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \
1059 : (SMC_inw(ioaddr, PN_REG) >> 8) )
1060
1061 #define SMC_GET_TXFIFO() \
1062 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \
1063 : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) )
1064
1065 #define SMC_GET_RXFIFO() \
1066 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \
1067 : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) )
1068
1069 #define SMC_GET_INT() \
1070 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \
1071 : (SMC_inw(ioaddr, INT_REG) & 0xFF) )
1072
1073 #define SMC_ACK_INT(x) \
1074 do { \
1075 if (SMC_CAN_USE_8BIT) \
1076 SMC_outb(x, ioaddr, INT_REG); \
1077 else { \
1078 unsigned long __flags; \
1079 int __mask; \
1080 local_irq_save(__flags); \
1081 __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \
1082 SMC_outw( __mask | (x), ioaddr, INT_REG ); \
1083 local_irq_restore(__flags); \
1084 } \
1085 } while (0)
1086
1087 #define SMC_GET_INT_MASK() \
1088 ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \
1089 : (SMC_inw( ioaddr, INT_REG ) >> 8) )
1090
1091 #define SMC_SET_INT_MASK(x) \
1092 do { \
1093 if (SMC_CAN_USE_8BIT) \
1094 SMC_outb(x, ioaddr, IM_REG); \
1095 else \
1096 SMC_outw((x) << 8, ioaddr, INT_REG); \
1097 } while (0)
1098
1099 #define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT)
1100
1101 #define SMC_SELECT_BANK(x) \
1102 do { \
1103 if (SMC_MUST_ALIGN_WRITE) \
1104 SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
1105 else \
1106 SMC_outw(x, ioaddr, BANK_SELECT); \
1107 } while (0)
1108
1109 #define SMC_GET_BASE() SMC_inw(ioaddr, BASE_REG)
1110
1111 #define SMC_SET_BASE(x) SMC_outw(x, ioaddr, BASE_REG)
1112
1113 #define SMC_GET_CONFIG() SMC_inw(ioaddr, CONFIG_REG)
1114
1115 #define SMC_SET_CONFIG(x) SMC_outw(x, ioaddr, CONFIG_REG)
1116
1117 #define SMC_GET_COUNTER() SMC_inw(ioaddr, COUNTER_REG)
1118
1119 #define SMC_GET_CTL() SMC_inw(ioaddr, CTL_REG)
1120
1121 #define SMC_SET_CTL(x) SMC_outw(x, ioaddr, CTL_REG)
1122
1123 #define SMC_GET_MII() SMC_inw(ioaddr, MII_REG)
1124
1125 #define SMC_SET_MII(x) SMC_outw(x, ioaddr, MII_REG)
1126
1127 #define SMC_GET_MIR() SMC_inw(ioaddr, MIR_REG)
1128
1129 #define SMC_SET_MIR(x) SMC_outw(x, ioaddr, MIR_REG)
1130
1131 #define SMC_GET_MMU_CMD() SMC_inw(ioaddr, MMU_CMD_REG)
1132
1133 #define SMC_SET_MMU_CMD(x) SMC_outw(x, ioaddr, MMU_CMD_REG)
1134
1135 #define SMC_GET_FIFO() SMC_inw(ioaddr, FIFO_REG)
1136
1137 #define SMC_GET_PTR() SMC_inw(ioaddr, PTR_REG)
1138
1139 #define SMC_SET_PTR(x) \
1140 do { \
1141 if (SMC_MUST_ALIGN_WRITE) \
1142 SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2)); \
1143 else \
1144 SMC_outw(x, ioaddr, PTR_REG); \
1145 } while (0)
1146
1147 #define SMC_GET_EPH_STATUS() SMC_inw(ioaddr, EPH_STATUS_REG)
1148
1149 #define SMC_GET_RCR() SMC_inw(ioaddr, RCR_REG)
1150
1151 #define SMC_SET_RCR(x) SMC_outw(x, ioaddr, RCR_REG)
1152
1153 #define SMC_GET_REV() SMC_inw(ioaddr, REV_REG)
1154
1155 #define SMC_GET_RPC() SMC_inw(ioaddr, RPC_REG)
1156
1157 #define SMC_SET_RPC(x) \
1158 do { \
1159 if (SMC_MUST_ALIGN_WRITE) \
1160 SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0)); \
1161 else \
1162 SMC_outw(x, ioaddr, RPC_REG); \
1163 } while (0)
1164
1165 #define SMC_GET_TCR() SMC_inw(ioaddr, TCR_REG)
1166
1167 #define SMC_SET_TCR(x) SMC_outw(x, ioaddr, TCR_REG)
1168
1169 #ifndef SMC_GET_MAC_ADDR
1170 #define SMC_GET_MAC_ADDR(addr) \
1171 do { \
1172 unsigned int __v; \
1173 __v = SMC_inw( ioaddr, ADDR0_REG ); \
1174 addr[0] = __v; addr[1] = __v >> 8; \
1175 __v = SMC_inw( ioaddr, ADDR1_REG ); \
1176 addr[2] = __v; addr[3] = __v >> 8; \
1177 __v = SMC_inw( ioaddr, ADDR2_REG ); \
1178 addr[4] = __v; addr[5] = __v >> 8; \
1179 } while (0)
1180 #endif
1181
1182 #define SMC_SET_MAC_ADDR(addr) \
1183 do { \
1184 SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \
1185 SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \
1186 SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \
1187 } while (0)
1188
1189 #define SMC_SET_MCAST(x) \
1190 do { \
1191 const unsigned char *mt = (x); \
1192 SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \
1193 SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \
1194 SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \
1195 SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \
1196 } while (0)
1197
1198 #define SMC_PUT_PKT_HDR(status, length) \
1199 do { \
1200 if (SMC_CAN_USE_32BIT) \
1201 SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \
1202 else { \
1203 SMC_outw(status, ioaddr, DATA_REG); \
1204 SMC_outw(length, ioaddr, DATA_REG); \
1205 } \
1206 } while (0)
1207
1208 #define SMC_GET_PKT_HDR(status, length) \
1209 do { \
1210 if (SMC_CAN_USE_32BIT) { \
1211 unsigned int __val = SMC_inl(ioaddr, DATA_REG); \
1212 (status) = __val & 0xffff; \
1213 (length) = __val >> 16; \
1214 } else { \
1215 (status) = SMC_inw(ioaddr, DATA_REG); \
1216 (length) = SMC_inw(ioaddr, DATA_REG); \
1217 } \
1218 } while (0)
1219
1220 #define SMC_PUSH_DATA(p, l) \
1221 do { \
1222 if (SMC_CAN_USE_32BIT) { \
1223 void *__ptr = (p); \
1224 int __len = (l); \
1225 void __iomem *__ioaddr = ioaddr; \
1226 if (__len >= 2 && (unsigned long)__ptr & 2) { \
1227 __len -= 2; \
1228 SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \
1229 __ptr += 2; \
1230 } \
1231 if (SMC_CAN_USE_DATACS && lp->datacs) \
1232 __ioaddr = lp->datacs; \
1233 SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \
1234 if (__len & 2) { \
1235 __ptr += (__len & ~3); \
1236 SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \
1237 } \
1238 } else if (SMC_CAN_USE_16BIT) \
1239 SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \
1240 else if (SMC_CAN_USE_8BIT) \
1241 SMC_outsb(ioaddr, DATA_REG, p, l); \
1242 } while (0)
1243
1244 #define SMC_PULL_DATA(p, l) \
1245 do { \
1246 if (SMC_CAN_USE_32BIT) { \
1247 void *__ptr = (p); \
1248 int __len = (l); \
1249 void __iomem *__ioaddr = ioaddr; \
1250 if ((unsigned long)__ptr & 2) { \
1251 /* \
1252 * We want 32bit alignment here. \
1253 * Since some buses perform a full \
1254 * 32bit fetch even for 16bit data \
1255 * we can't use SMC_inw() here. \
1256 * Back both source (on-chip) and \
1257 * destination pointers of 2 bytes. \
1258 * This is possible since the call to \
1259 * SMC_GET_PKT_HDR() already advanced \
1260 * the source pointer of 4 bytes, and \
1261 * the skb_reserve(skb, 2) advanced \
1262 * the destination pointer of 2 bytes. \
1263 */ \
1264 __ptr -= 2; \
1265 __len += 2; \
1266 SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
1267 } \
1268 if (SMC_CAN_USE_DATACS && lp->datacs) \
1269 __ioaddr = lp->datacs; \
1270 __len += 2; \
1271 SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \
1272 } else if (SMC_CAN_USE_16BIT) \
1273 SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \
1274 else if (SMC_CAN_USE_8BIT) \
1275 SMC_insb(ioaddr, DATA_REG, p, l); \
1276 } while (0)
1277
1278 #endif /* _SMC91X_H_ */
WRT350N Kernel Patches