drivers/ata/sata_via.c

   1 /*
   2  *  sata_via.c - VIA Serial ATA controllers
   3  *
   4  *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
   5  *                 Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                 on emails.
   7  *
   8  *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
   9  *  Copyright 2003-2004 Jeff Garzik
  10  *
  11  *
  12  *  This program is free software; you can redistribute it and/or modify
  13  *  it under the terms of the GNU General Public License as published by
  14  *  the Free Software Foundation; either version 2, or (at your option)
  15  *  any later version.
  16  *
  17  *  This program is distributed in the hope that it will be useful,
  18  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *  GNU General Public License for more details.
  21  *
  22  *  You should have received a copy of the GNU General Public License
  23  *  along with this program; see the file COPYING.  If not, write to
  24  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  25  *
  26  *
  27  *  libata documentation is available via 'make {ps|pdf}docs',
  28  *  as Documentation/DocBook/libata.*
  29  *
  30  *  Hardware documentation available under NDA.
  31  *
  32  *
  33  *
  34  */
  35
  36 #include <linux/kernel.h>
  37 #include <linux/module.h>
  38 #include <linux/pci.h>
  39 #include <linux/init.h>
  40 #include <linux/blkdev.h>
  41 #include <linux/delay.h>
  42 #include <linux/device.h>
  43 #include <scsi/scsi_host.h>
  44 #include <linux/libata.h>
  45
  46 #define DRV_NAME        "sata_via"
  47 #define DRV_VERSION     "2.3"
  48
  49 enum board_ids_enum {
  50         vt6420,
  51         vt6421,
  52 };
  53
  54 enum {
  55         SATA_CHAN_ENAB          = 0x40, /* SATA channel enable */
  56         SATA_INT_GATE           = 0x41, /* SATA interrupt gating */
  57         SATA_NATIVE_MODE        = 0x42, /* Native mode enable */
  58         PATA_UDMA_TIMING        = 0xB3, /* PATA timing for DMA/ cable detect */
  59         PATA_PIO_TIMING         = 0xAB, /* PATA timing register */
  60
  61         PORT0                   = (1 << 1),
  62         PORT1                   = (1 << 0),
  63         ALL_PORTS               = PORT0 | PORT1,
  64
  65         NATIVE_MODE_ALL         = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
  66
  67         SATA_EXT_PHY            = (1 << 6), /* 0==use PATA, 1==ext phy */
  68 };
  69
  70 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  71 static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
  72 static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
  73 static void svia_noop_freeze(struct ata_port *ap);
  74 static void vt6420_error_handler(struct ata_port *ap);
  75 static int vt6421_pata_cable_detect(struct ata_port *ap);
  76 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
  77 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
  78
  79 static const struct pci_device_id svia_pci_tbl[] = {
  80         { PCI_VDEVICE(VIA, 0x5337), vt6420 },
  81         { PCI_VDEVICE(VIA, 0x0591), vt6420 },
  82         { PCI_VDEVICE(VIA, 0x3149), vt6420 },
  83         { PCI_VDEVICE(VIA, 0x3249), vt6421 },
  84         { PCI_VDEVICE(VIA, 0x5287), vt6420 },
  85         { PCI_VDEVICE(VIA, 0x5372), vt6420 },
  86         { PCI_VDEVICE(VIA, 0x7372), vt6420 },
  87
  88         { }     /* terminate list */
  89 };
  90
  91 static struct pci_driver svia_pci_driver = {
  92         .name                   = DRV_NAME,
  93         .id_table               = svia_pci_tbl,
  94         .probe                  = svia_init_one,
  95 #ifdef CONFIG_PM
  96         .suspend                = ata_pci_device_suspend,
  97         .resume                 = ata_pci_device_resume,
  98 #endif
  99         .remove                 = ata_pci_remove_one,
 100 };
 101
 102 static struct scsi_host_template svia_sht = {
 103         .module                 = THIS_MODULE,
 104         .name                   = DRV_NAME,
 105         .ioctl                  = ata_scsi_ioctl,
 106         .queuecommand           = ata_scsi_queuecmd,
 107         .can_queue              = ATA_DEF_QUEUE,
 108         .this_id                = ATA_SHT_THIS_ID,
 109         .sg_tablesize           = LIBATA_MAX_PRD,
 110         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
 111         .emulated               = ATA_SHT_EMULATED,
 112         .use_clustering         = ATA_SHT_USE_CLUSTERING,
 113         .proc_name              = DRV_NAME,
 114         .dma_boundary           = ATA_DMA_BOUNDARY,
 115         .slave_configure        = ata_scsi_slave_config,
 116         .slave_destroy          = ata_scsi_slave_destroy,
 117         .bios_param             = ata_std_bios_param,
 118 };
 119
 120 static const struct ata_port_operations vt6420_sata_ops = {
 121         .tf_load                = ata_tf_load,
 122         .tf_read                = ata_tf_read,
 123         .check_status           = ata_check_status,
 124         .exec_command           = ata_exec_command,
 125         .dev_select             = ata_std_dev_select,
 126
 127         .bmdma_setup            = ata_bmdma_setup,
 128         .bmdma_start            = ata_bmdma_start,
 129         .bmdma_stop             = ata_bmdma_stop,
 130         .bmdma_status           = ata_bmdma_status,
 131
 132         .qc_prep                = ata_qc_prep,
 133         .qc_issue               = ata_qc_issue_prot,
 134         .data_xfer              = ata_data_xfer,
 135
 136         .freeze                 = svia_noop_freeze,
 137         .thaw                   = ata_bmdma_thaw,
 138         .error_handler          = vt6420_error_handler,
 139         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
 140
 141         .irq_clear              = ata_bmdma_irq_clear,
 142         .irq_on                 = ata_irq_on,
 143
 144         .port_start             = ata_port_start,
 145 };
 146
 147 static const struct ata_port_operations vt6421_pata_ops = {
 148         .set_piomode            = vt6421_set_pio_mode,
 149         .set_dmamode            = vt6421_set_dma_mode,
 150
 151         .tf_load                = ata_tf_load,
 152         .tf_read                = ata_tf_read,
 153         .check_status           = ata_check_status,
 154         .exec_command           = ata_exec_command,
 155         .dev_select             = ata_std_dev_select,
 156
 157         .bmdma_setup            = ata_bmdma_setup,
 158         .bmdma_start            = ata_bmdma_start,
 159         .bmdma_stop             = ata_bmdma_stop,
 160         .bmdma_status           = ata_bmdma_status,
 161
 162         .qc_prep                = ata_qc_prep,
 163         .qc_issue               = ata_qc_issue_prot,
 164         .data_xfer              = ata_data_xfer,
 165
 166         .freeze                 = ata_bmdma_freeze,
 167         .thaw                   = ata_bmdma_thaw,
 168         .error_handler          = ata_bmdma_error_handler,
 169         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
 170         .cable_detect           = vt6421_pata_cable_detect,
 171
 172         .irq_clear              = ata_bmdma_irq_clear,
 173         .irq_on                 = ata_irq_on,
 174
 175         .port_start             = ata_port_start,
 176 };
 177
 178 static const struct ata_port_operations vt6421_sata_ops = {
 179         .tf_load                = ata_tf_load,
 180         .tf_read                = ata_tf_read,
 181         .check_status           = ata_check_status,
 182         .exec_command           = ata_exec_command,
 183         .dev_select             = ata_std_dev_select,
 184
 185         .bmdma_setup            = ata_bmdma_setup,
 186         .bmdma_start            = ata_bmdma_start,
 187         .bmdma_stop             = ata_bmdma_stop,
 188         .bmdma_status           = ata_bmdma_status,
 189
 190         .qc_prep                = ata_qc_prep,
 191         .qc_issue               = ata_qc_issue_prot,
 192         .data_xfer              = ata_data_xfer,
 193
 194         .freeze                 = ata_bmdma_freeze,
 195         .thaw                   = ata_bmdma_thaw,
 196         .error_handler          = ata_bmdma_error_handler,
 197         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
 198         .cable_detect           = ata_cable_sata,
 199
 200         .irq_clear              = ata_bmdma_irq_clear,
 201         .irq_on                 = ata_irq_on,
 202
 203         .scr_read               = svia_scr_read,
 204         .scr_write              = svia_scr_write,
 205
 206         .port_start             = ata_port_start,
 207 };
 208
 209 static const struct ata_port_info vt6420_port_info = {
 210         .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 211         .pio_mask       = 0x1f,
 212         .mwdma_mask     = 0x07,
 213         .udma_mask      = ATA_UDMA6,
 214         .port_ops       = &vt6420_sata_ops,
 215 };
 216
 217 static struct ata_port_info vt6421_sport_info = {
 218         .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 219         .pio_mask       = 0x1f,
 220         .mwdma_mask     = 0x07,
 221         .udma_mask      = ATA_UDMA6,
 222         .port_ops       = &vt6421_sata_ops,
 223 };
 224
 225 static struct ata_port_info vt6421_pport_info = {
 226         .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
 227         .pio_mask       = 0x1f,
 228         .mwdma_mask     = 0,
 229         .udma_mask      = ATA_UDMA6,
 230         .port_ops       = &vt6421_pata_ops,
 231 };
 232
 233 MODULE_AUTHOR("Jeff Garzik");
 234 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 235 MODULE_LICENSE("GPL");
 236 MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
 237 MODULE_VERSION(DRV_VERSION);
 238
 239 static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
 240 {
 241         if (sc_reg > SCR_CONTROL)
 242                 return -EINVAL;
 243         *val = ioread32(ap->ioaddr.scr_addr + (4 * sc_reg));
 244         return 0;
 245 }
 246
 247 static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
 248 {
 249         if (sc_reg > SCR_CONTROL)
 250                 return -EINVAL;
 251         iowrite32(val, ap->ioaddr.scr_addr + (4 * sc_reg));
 252         return 0;
 253 }
 254
 255 static void svia_noop_freeze(struct ata_port *ap)
 256 {
 257         /* Some VIA controllers choke if ATA_NIEN is manipulated in
 258          * certain way.  Leave it alone and just clear pending IRQ.
 259          */
 260         ata_chk_status(ap);
 261         ata_bmdma_irq_clear(ap);
 262 }
 263
 264 /**
 265  *      vt6420_prereset - prereset for vt6420
 266  *      @link: target ATA link
 267  *      @deadline: deadline jiffies for the operation
 268  *
 269  *      SCR registers on vt6420 are pieces of shit and may hang the
 270  *      whole machine completely if accessed with the wrong timing.
 271  *      To avoid such catastrophe, vt6420 doesn't provide generic SCR
 272  *      access operations, but uses SStatus and SControl only during
 273  *      boot probing in controlled way.
 274  *
 275  *      As the old (pre EH update) probing code is proven to work, we
 276  *      strictly follow the access pattern.
 277  *
 278  *      LOCKING:
 279  *      Kernel thread context (may sleep)
 280  *
 281  *      RETURNS:
 282  *      0 on success, -errno otherwise.
 283  */
 284 static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 285 {
 286         struct ata_port *ap = link->ap;
 287         struct ata_eh_context *ehc = &ap->link.eh_context;
 288         unsigned long timeout = jiffies + (HZ * 5);
 289         u32 sstatus, scontrol;
 290         int online;
 291
 292         /* don't do any SCR stuff if we're not loading */
 293         if (!(ap->pflags & ATA_PFLAG_LOADING))
 294                 goto skip_scr;
 295
 296         /* Resume phy.  This is the old SATA resume sequence */
 297         svia_scr_write(ap, SCR_CONTROL, 0x300);
 298         svia_scr_read(ap, SCR_CONTROL, &scontrol); /* flush */
 299
 300         /* wait for phy to become ready, if necessary */
 301         do {
 302                 msleep(200);
 303                 svia_scr_read(ap, SCR_STATUS, &sstatus);
 304                 if ((sstatus & 0xf) != 1)
 305                         break;
 306         } while (time_before(jiffies, timeout));
 307
 308         /* open code sata_print_link_status() */
 309         svia_scr_read(ap, SCR_STATUS, &sstatus);
 310         svia_scr_read(ap, SCR_CONTROL, &scontrol);
 311
 312         online = (sstatus & 0xf) == 0x3;
 313
 314         ata_port_printk(ap, KERN_INFO,
 315                         "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
 316                         online ? "up" : "down", sstatus, scontrol);
 317
 318         /* SStatus is read one more time */
 319         svia_scr_read(ap, SCR_STATUS, &sstatus);
 320
 321         if (!online) {
 322                 /* tell EH to bail */
 323                 ehc->i.action &= ~ATA_EH_RESET_MASK;
 324                 return 0;
 325         }
 326
 327  skip_scr:
 328         /* wait for !BSY */
 329         ata_wait_ready(ap, deadline);
 330
 331         return 0;
 332 }
 333
 334 static void vt6420_error_handler(struct ata_port *ap)
 335 {
 336         ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, NULL,
 337                            ata_std_postreset);
 338 }
 339
 340 static int vt6421_pata_cable_detect(struct ata_port *ap)
 341 {
 342         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 343         u8 tmp;
 344
 345         pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp);
 346         if (tmp & 0x10)
 347                 return ATA_CBL_PATA40;
 348         return ATA_CBL_PATA80;
 349 }
 350
 351 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 352 {
 353         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 354         static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 };
 355         pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]);
 356 }
 357
 358 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 359 {
 360         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 361         static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
 362         pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]);
 363 }
 364
 365 static const unsigned int svia_bar_sizes[] = {
 366         8, 4, 8, 4, 16, 256
 367 };
 368
 369 static const unsigned int vt6421_bar_sizes[] = {
 370         16, 16, 16, 16, 32, 128
 371 };
 372
 373 static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port)
 374 {
 375         return addr + (port * 128);
 376 }
 377
 378 static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port)
 379 {
 380         return addr + (port * 64);
 381 }
 382
 383 static void vt6421_init_addrs(struct ata_port *ap)
 384 {
 385         void __iomem * const * iomap = ap->host->iomap;
 386         void __iomem *reg_addr = iomap[ap->port_no];
 387         void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8);
 388         struct ata_ioports *ioaddr = &ap->ioaddr;
 389
 390         ioaddr->cmd_addr = reg_addr;
 391         ioaddr->altstatus_addr =
 392         ioaddr->ctl_addr = (void __iomem *)
 393                 ((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS);
 394         ioaddr->bmdma_addr = bmdma_addr;
 395         ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
 396
 397         ata_std_ports(ioaddr);
 398
 399         ata_port_pbar_desc(ap, ap->port_no, -1, "port");
 400         ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
 401 }
 402
 403 static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 404 {
 405         const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
 406         struct ata_host *host;
 407         int rc;
 408
 409         rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 410         if (rc)
 411                 return rc;
 412         *r_host = host;
 413
 414         rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
 415         if (rc) {
 416                 dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
 417                 return rc;
 418         }
 419
 420         host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
 421         host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);
 422
 423         return 0;
 424 }
 425
 426 static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 427 {
 428         const struct ata_port_info *ppi[] =
 429                 { &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
 430         struct ata_host *host;
 431         int i, rc;
 432
 433         *r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
 434         if (!host) {
 435                 dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
 436                 return -ENOMEM;
 437         }
 438
 439         rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
 440         if (rc) {
 441                 dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
 442                            "PCI BARs (errno=%d)\n", rc);
 443                 return rc;
 444         }
 445         host->iomap = pcim_iomap_table(pdev);
 446
 447         for (i = 0; i < host->n_ports; i++)
 448                 vt6421_init_addrs(host->ports[i]);
 449
 450         rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 451         if (rc)
 452                 return rc;
 453         rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
 454         if (rc)
 455                 return rc;
 456
 457         return 0;
 458 }
 459
 460 static void svia_configure(struct pci_dev *pdev)
 461 {
 462         u8 tmp8;
 463
 464         pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
 465         dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
 466                (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
 467
 468         /* make sure SATA channels are enabled */
 469         pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
 470         if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
 471                 dev_printk(KERN_DEBUG, &pdev->dev,
 472                            "enabling SATA channels (0x%x)\n",
 473                            (int) tmp8);
 474                 tmp8 |= ALL_PORTS;
 475                 pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
 476         }
 477
 478         /* make sure interrupts for each channel sent to us */
 479         pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
 480         if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
 481                 dev_printk(KERN_DEBUG, &pdev->dev,
 482                            "enabling SATA channel interrupts (0x%x)\n",
 483                            (int) tmp8);
 484                 tmp8 |= ALL_PORTS;
 485                 pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
 486         }
 487
 488         /* make sure native mode is enabled */
 489         pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
 490         if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
 491                 dev_printk(KERN_DEBUG, &pdev->dev,
 492                            "enabling SATA channel native mode (0x%x)\n",
 493                            (int) tmp8);
 494                 tmp8 |= NATIVE_MODE_ALL;
 495                 pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 496         }
 497 }
 498
 499 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 500 {
 501         static int printed_version;
 502         unsigned int i;
 503         int rc;
 504         struct ata_host *host;
 505         int board_id = (int) ent->driver_data;
 506         const unsigned *bar_sizes;
 507
 508         if (!printed_version++)
 509                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 510
 511         rc = pcim_enable_device(pdev);
 512         if (rc)
 513                 return rc;
 514
 515         if (board_id == vt6420)
 516                 bar_sizes = &svia_bar_sizes[0];
 517         else
 518                 bar_sizes = &vt6421_bar_sizes[0];
 519
 520         for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
 521                 if ((pci_resource_start(pdev, i) == 0) ||
 522                     (pci_resource_len(pdev, i) < bar_sizes[i])) {
 523                         dev_printk(KERN_ERR, &pdev->dev,
 524                                 "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
 525                                 i,
 526                                 (unsigned long long)pci_resource_start(pdev, i),
 527                                 (unsigned long long)pci_resource_len(pdev, i));
 528                         return -ENODEV;
 529                 }
 530
 531         if (board_id == vt6420)
 532                 rc = vt6420_prepare_host(pdev, &host);
 533         else
 534                 rc = vt6421_prepare_host(pdev, &host);
 535         if (rc)
 536                 return rc;
 537
 538         svia_configure(pdev);
 539
 540         pci_set_master(pdev);
 541         return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
 542                                  &svia_sht);
 543 }
 544
 545 static int __init svia_init(void)
 546 {
 547         return pci_register_driver(&svia_pci_driver);
 548 }
 549
 550 static void __exit svia_exit(void)
 551 {
 552         pci_unregister_driver(&svia_pci_driver);
 553 }
 554
 555 module_init(svia_init);
 556 module_exit(svia_exit);