include/asm-arm/arch-at91/at91_twi.h

   1 /*
   2  * include/asm-arm/arch-at91/at91_twi.h
   3  *
   4  * Copyright (C) 2005 Ivan Kokshaysky
   5  * Copyright (C) SAN People
   6  *
   7  * Two-wire Interface (TWI) registers.
   8  * Based on AT91RM9200 datasheet revision E.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  */
  15
  16 #ifndef AT91_TWI_H
  17 #define AT91_TWI_H
  18
  19 #define AT91_TWI_CR             0x00            /* Control Register */
  20 #define         AT91_TWI_START          (1 <<  0)       /* Send a Start Condition */
  21 #define         AT91_TWI_STOP           (1 <<  1)       /* Send a Stop Condition */
  22 #define         AT91_TWI_MSEN           (1 <<  2)       /* Master Transfer Enable */
  23 #define         AT91_TWI_MSDIS          (1 <<  3)       /* Master Transfer Disable */
  24 #define         AT91_TWI_SVEN           (1 <<  4)       /* Slave Transfer Enable [SAM9260 only] */
  25 #define         AT91_TWI_SVDIS          (1 <<  5)       /* Slave Transfer Disable [SAM9260 only] */
  26 #define         AT91_TWI_SWRST          (1 <<  7)       /* Software Reset */
  27
  28 #define AT91_TWI_MMR            0x04            /* Master Mode Register */
  29 #define         AT91_TWI_IADRSZ         (3    <<  8)    /* Internal Device Address Size */
  30 #define                 AT91_TWI_IADRSZ_NO              (0 << 8)
  31 #define                 AT91_TWI_IADRSZ_1               (1 << 8)
  32 #define                 AT91_TWI_IADRSZ_2               (2 << 8)
  33 #define                 AT91_TWI_IADRSZ_3               (3 << 8)
  34 #define         AT91_TWI_MREAD          (1    << 12)    /* Master Read Direction */
  35 #define         AT91_TWI_DADR           (0x7f << 16)    /* Device Address */
  36
  37 #define AT91_TWI_SMR            0x08            /* Slave Mode Register [SAM9260 only] */
  38 #define         AT91_TWI_SADR           (0x7f << 16)    /* Slave Address */
  39
  40 #define AT91_TWI_IADR           0x0c            /* Internal Address Register */
  41
  42 #define AT91_TWI_CWGR           0x10            /* Clock Waveform Generator Register */
  43 #define         AT91_TWI_CLDIV          (0xff <<  0)    /* Clock Low Divisor */
  44 #define         AT91_TWI_CHDIV          (0xff <<  8)    /* Clock High Divisor */
  45 #define         AT91_TWI_CKDIV          (7    << 16)    /* Clock Divider */
  46
  47 #define AT91_TWI_SR             0x20            /* Status Register */
  48 #define         AT91_TWI_TXCOMP         (1 <<  0)       /* Transmission Complete */
  49 #define         AT91_TWI_RXRDY          (1 <<  1)       /* Receive Holding Register Ready */
  50 #define         AT91_TWI_TXRDY          (1 <<  2)       /* Transmit Holding Register Ready */
  51 #define         AT91_TWI_SVREAD         (1 <<  3)       /* Slave Read [SAM9260 only] */
  52 #define         AT91_TWI_SVACC          (1 <<  4)       /* Slave Access [SAM9260 only] */
  53 #define         AT91_TWI_GACC           (1 <<  5)       /* General Call Access [SAM9260 only] */
  54 #define         AT91_TWI_OVRE           (1 <<  6)       /* Overrun Error [AT91RM9200 only] */
  55 #define         AT91_TWI_UNRE           (1 <<  7)       /* Underrun Error [AT91RM9200 only] */
  56 #define         AT91_TWI_NACK           (1 <<  8)       /* Not Acknowledged */
  57 #define         AT91_TWI_ARBLST         (1 <<  9)       /* Arbitration Lost [SAM9260 only] */
  58 #define         AT91_TWI_SCLWS          (1 << 10)       /* Clock Wait State [SAM9260 only] */
  59 #define         AT91_TWI_EOSACC         (1 << 11)       /* End of Slave Address [SAM9260 only] */
  60
  61 #define AT91_TWI_IER            0x24            /* Interrupt Enable Register */
  62 #define AT91_TWI_IDR            0x28            /* Interrupt Disable Register */
  63 #define AT91_TWI_IMR            0x2c            /* Interrupt Mask Register */
  64 #define AT91_TWI_RHR            0x30            /* Receive Holding Register */
  65 #define AT91_TWI_THR            0x34            /* Transmit Holding Register */
  66
  67 #endif
  68