drivers/serial/8250.h

   1 /*
   2  *  linux/drivers/char/8250.h
   3  *
   4  *  Driver for 8250/16550-type serial ports
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  *  $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
  16  */
  17
  18 #include <linux/serial_8250.h>
  19
  20 struct old_serial_port {
  21         unsigned int uart;
  22         unsigned int baud_base;
  23         unsigned int port;
  24         unsigned int irq;
  25         unsigned int flags;
  26         unsigned char hub6;
  27         unsigned char io_type;
  28         unsigned char *iomem_base;
  29         unsigned short iomem_reg_shift;
  30 };
  31
  32 /*
  33  * This replaces serial_uart_config in include/linux/serial.h
  34  */
  35 struct serial8250_config {
  36         const char      *name;
  37         unsigned short  fifo_size;
  38         unsigned short  tx_loadsz;
  39         unsigned char   fcr;
  40         unsigned int    flags;
  41 };
  42
  43 #define UART_CAP_FIFO   (1 << 8)        /* UART has FIFO */
  44 #define UART_CAP_EFR    (1 << 9)        /* UART has EFR */
  45 #define UART_CAP_SLEEP  (1 << 10)       /* UART has IER sleep */
  46 #define UART_CAP_AFE    (1 << 11)       /* MCR-based hw flow control */
  47 #define UART_CAP_UUE    (1 << 12)       /* UART needs IER bit 6 set (Xscale) */
  48
  49 #define UART_BUG_QUOT   (1 << 0)        /* UART has buggy quot LSB */
  50 #define UART_BUG_TXEN   (1 << 1)        /* UART has buggy TX IIR status */
  51 #define UART_BUG_NOMSR  (1 << 2)        /* UART has buggy MSR status bits (Au1x00) */
  52
  53 #define PROBE_RSA       (1 << 0)
  54 #define PROBE_ANY       (~0)
  55
  56 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
  57
  58 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
  59 #define SERIAL8250_SHARE_IRQS 1
  60 #else
  61 #define SERIAL8250_SHARE_IRQS 0
  62 #endif
  63
  64 #if defined(__alpha__) && !defined(CONFIG_PCI)
  65 /*
  66  * Digital did something really horribly wrong with the OUT1 and OUT2
  67  * lines on at least some ALPHA's.  The failure mode is that if either
  68  * is cleared, the machine locks up with endless interrupts.
  69  */
  70 #define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
  71 #elif defined(CONFIG_SBC8560)
  72 /*
  73  * WindRiver did something similarly broken on their SBC8560 board. The
  74  * UART tristates its IRQ output while OUT2 is clear, but they pulled
  75  * the interrupt line _up_ instead of down, so if we register the IRQ
  76  * while the UART is in that state, we die in an IRQ storm. */
  77 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
  78 #else
  79 #define ALPHA_KLUDGE_MCR 0
  80 #endif