Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
[wrt350n-kernel.git] / include / asm-arm / arch-pxa / irqs.h
blobc562b972a4a69c00f4f567cfef7029f0cc15892a
1 /*
2 * linux/include/asm-arm/arch-pxa/irqs.h
4 * Author: Nicolas Pitre
5 * Created: Jun 15, 2001
6 * Copyright: MontaVista Software Inc.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 #define PXA_IRQ(x) (x)
16 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
17 #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
18 #define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */
19 #define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */
20 #define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */
21 #define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */
22 #define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */
23 #define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */
24 #endif
26 #define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */
27 #define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */
28 #define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */
29 #define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */
30 #define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */
31 #define IRQ_USB PXA_IRQ(11) /* USB Service */
32 #define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */
33 #define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */
34 #define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */
35 #define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */
36 #define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */
37 #define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */
38 #define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */
39 #define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */
40 #define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */
41 #define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */
42 #define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */
43 #define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */
44 #define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/
45 #define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */
46 #define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */
47 #define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */
48 #define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */
49 #define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */
50 #define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */
51 #define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */
52 #define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */
53 #define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */
55 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
56 #define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */
57 #define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */
58 #endif
60 #ifdef CONFIG_PXA3xx
61 #define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
62 #define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
63 #define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
64 #define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
65 #define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
66 #define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
67 #define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
68 #define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
69 #define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */
70 #define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */
71 #define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */
72 #define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */
73 #define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
74 #endif
76 #define PXA_GPIO_IRQ_BASE (64)
77 #define PXA_GPIO_IRQ_NUM (128)
79 #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
80 #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
82 #define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE)
83 #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
86 * The next 16 interrupts are for board specific purposes. Since
87 * the kernel can only run on one machine at a time, we can re-use
88 * these. If you need more, increase IRQ_BOARD_END, but keep it
89 * within sensible limits.
91 #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
92 #define IRQ_BOARD_END (IRQ_BOARD_START + 16)
94 #define IRQ_SA1111_START (IRQ_BOARD_END)
95 #define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
96 #define IRQ_GPAIN1 (IRQ_BOARD_END + 1)
97 #define IRQ_GPAIN2 (IRQ_BOARD_END + 2)
98 #define IRQ_GPAIN3 (IRQ_BOARD_END + 3)
99 #define IRQ_GPBIN0 (IRQ_BOARD_END + 4)
100 #define IRQ_GPBIN1 (IRQ_BOARD_END + 5)
101 #define IRQ_GPBIN2 (IRQ_BOARD_END + 6)
102 #define IRQ_GPBIN3 (IRQ_BOARD_END + 7)
103 #define IRQ_GPBIN4 (IRQ_BOARD_END + 8)
104 #define IRQ_GPBIN5 (IRQ_BOARD_END + 9)
105 #define IRQ_GPCIN0 (IRQ_BOARD_END + 10)
106 #define IRQ_GPCIN1 (IRQ_BOARD_END + 11)
107 #define IRQ_GPCIN2 (IRQ_BOARD_END + 12)
108 #define IRQ_GPCIN3 (IRQ_BOARD_END + 13)
109 #define IRQ_GPCIN4 (IRQ_BOARD_END + 14)
110 #define IRQ_GPCIN5 (IRQ_BOARD_END + 15)
111 #define IRQ_GPCIN6 (IRQ_BOARD_END + 16)
112 #define IRQ_GPCIN7 (IRQ_BOARD_END + 17)
113 #define IRQ_MSTXINT (IRQ_BOARD_END + 18)
114 #define IRQ_MSRXINT (IRQ_BOARD_END + 19)
115 #define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20)
116 #define IRQ_TPTXINT (IRQ_BOARD_END + 21)
117 #define IRQ_TPRXINT (IRQ_BOARD_END + 22)
118 #define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23)
119 #define SSPXMTINT (IRQ_BOARD_END + 24)
120 #define SSPRCVINT (IRQ_BOARD_END + 25)
121 #define SSPROR (IRQ_BOARD_END + 26)
122 #define AUDXMTDMADONEA (IRQ_BOARD_END + 32)
123 #define AUDRCVDMADONEA (IRQ_BOARD_END + 33)
124 #define AUDXMTDMADONEB (IRQ_BOARD_END + 34)
125 #define AUDRCVDMADONEB (IRQ_BOARD_END + 35)
126 #define AUDTFSR (IRQ_BOARD_END + 36)
127 #define AUDRFSR (IRQ_BOARD_END + 37)
128 #define AUDTUR (IRQ_BOARD_END + 38)
129 #define AUDROR (IRQ_BOARD_END + 39)
130 #define AUDDTS (IRQ_BOARD_END + 40)
131 #define AUDRDD (IRQ_BOARD_END + 41)
132 #define AUDSTO (IRQ_BOARD_END + 42)
133 #define IRQ_USBPWR (IRQ_BOARD_END + 43)
134 #define IRQ_HCIM (IRQ_BOARD_END + 44)
135 #define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
136 #define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
137 #define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
138 #define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48)
139 #define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49)
140 #define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50)
141 #define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51)
142 #define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52)
143 #define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53)
144 #define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54)
146 #define IRQ_LOCOMO_START (IRQ_BOARD_END)
147 #define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0)
148 #define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1)
149 #define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2)
150 #define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3)
151 #define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4)
152 #define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5)
153 #define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6)
154 #define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7)
155 #define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8)
156 #define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9)
157 #define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10)
158 #define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11)
159 #define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12)
160 #define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13)
161 #define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14)
162 #define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15)
163 #define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16)
164 #define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
165 #define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
166 #define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
167 #define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
168 #define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
171 * Figure out the MAX IRQ number.
173 * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
174 * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
175 * Otherwise, we have the standard IRQs only.
177 #ifdef CONFIG_SA1111
178 #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
179 #elif defined(CONFIG_SHARP_LOCOMO)
180 #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
181 #elif defined(CONFIG_ARCH_LUBBOCK) || \
182 defined(CONFIG_MACH_LOGICPD_PXA270) || \
183 defined(CONFIG_MACH_MAINSTONE) || \
184 defined(CONFIG_MACH_PCM027)
185 #define NR_IRQS (IRQ_BOARD_END)
186 #else
187 #define NR_IRQS (IRQ_BOARD_START)
188 #endif
191 * Board specific IRQs. Define them here.
192 * Do not surround them with ifdefs.
194 #define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
195 #define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
196 #define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
197 #define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
198 #define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
199 #define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
200 #define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
201 #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
202 #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
204 #define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
205 #define LPD270_USBC_IRQ LPD270_IRQ(2)
206 #define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
207 #define LPD270_AC97_IRQ LPD270_IRQ(4)
209 #define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
210 #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
211 #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
212 #define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
213 #define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
214 #define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
215 #define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
216 #define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
217 #define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
218 #define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
219 #define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
220 #define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
221 #define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
222 #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
223 #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
225 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
226 #define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
227 #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
228 #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
229 #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
231 /* phyCORE-PXA270 (PCM027) Interrupts */
232 #define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
233 #define PCM027_BTDET_IRQ PCM027_IRQ(0)
234 #define PCM027_FF_RI_IRQ PCM027_IRQ(1)
235 #define PCM027_MMCDET_IRQ PCM027_IRQ(2)
236 #define PCM027_PM_5V_IRQ PCM027_IRQ(3)
238 /* ITE8152 irqs */
239 /* add IT8152 IRQs beyond BOARD_END */
240 #ifdef CONFIG_PCI_HOST_ITE8152
241 #define IT8152_IRQ(x) (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x))
243 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
244 #define IT8152_LD_IRQ_COUNT 9
245 #define IT8152_LP_IRQ_COUNT 16
246 #define IT8152_PD_IRQ_COUNT 15
248 /* Priorities: */
249 #define IT8152_PD_IRQ(i) IT8152_IRQ(i)
250 #define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
251 #define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
253 #define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
255 #undef NR_IRQS
256 #define NR_IRQS (IT8152_LAST_IRQ+1)
257 #endif