drivers/clocksource/cyclone.c

   1 #include <linux/clocksource.h>
   2 #include <linux/string.h>
   3 #include <linux/errno.h>
   4 #include <linux/timex.h>
   5 #include <linux/init.h>
   6
   7 #include <asm/pgtable.h>
   8 #include <asm/io.h>
   9
  10 #include <asm/mach_timer.h>
  11
  12 #define CYCLONE_CBAR_ADDR       0xFEB00CD0      /* base address ptr */
  13 #define CYCLONE_PMCC_OFFSET     0x51A0          /* offset to control register */
  14 #define CYCLONE_MPCS_OFFSET     0x51A8          /* offset to select register */
  15 #define CYCLONE_MPMC_OFFSET     0x51D0          /* offset to count register */
  16 #define CYCLONE_TIMER_FREQ      99780000        /* 100Mhz, but not really */
  17 #define CYCLONE_TIMER_MASK      CLOCKSOURCE_MASK(32) /* 32 bit mask */
  18
  19 int use_cyclone = 0;
  20 static void __iomem *cyclone_ptr;
  21
  22 static cycle_t read_cyclone(struct clocksource *cs)
  23 {
  24         return (cycle_t)readl(cyclone_ptr);
  25 }
  26
  27 static struct clocksource clocksource_cyclone = {
  28         .name           = "cyclone",
  29         .rating         = 250,
  30         .read           = read_cyclone,
  31         .mask           = CYCLONE_TIMER_MASK,
  32         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
  33 };
  34
  35 static int __init init_cyclone_clocksource(void)
  36 {
  37         unsigned long base;     /* saved value from CBAR */
  38         unsigned long offset;
  39         u32 __iomem* volatile cyclone_timer;    /* Cyclone MPMC0 register */
  40         u32 __iomem* reg;
  41         int i;
  42
  43         /* make sure we're on a summit box: */
  44         if (!use_cyclone)
  45                 return -ENODEV;
  46
  47         printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
  48
  49         /* find base address: */
  50         offset = CYCLONE_CBAR_ADDR;
  51         reg = ioremap_nocache(offset, sizeof(reg));
  52         if (!reg) {
  53                 printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
  54                 return -ENODEV;
  55         }
  56         /* even on 64bit systems, this is only 32bits: */
  57         base = readl(reg);
  58         if (!base) {
  59                 printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
  60                 return -ENODEV;
  61         }
  62         iounmap(reg);
  63
  64         /* setup PMCC: */
  65         offset = base + CYCLONE_PMCC_OFFSET;
  66         reg = ioremap_nocache(offset, sizeof(reg));
  67         if (!reg) {
  68                 printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
  69                 return -ENODEV;
  70         }
  71         writel(0x00000001,reg);
  72         iounmap(reg);
  73
  74         /* setup MPCS: */
  75         offset = base + CYCLONE_MPCS_OFFSET;
  76         reg = ioremap_nocache(offset, sizeof(reg));
  77         if (!reg) {
  78                 printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
  79                 return -ENODEV;
  80         }
  81         writel(0x00000001,reg);
  82         iounmap(reg);
  83
  84         /* map in cyclone_timer: */
  85         offset = base + CYCLONE_MPMC_OFFSET;
  86         cyclone_timer = ioremap_nocache(offset, sizeof(u64));
  87         if (!cyclone_timer) {
  88                 printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
  89                 return -ENODEV;
  90         }
  91
  92         /* quick test to make sure its ticking: */
  93         for (i = 0; i < 3; i++){
  94                 u32 old = readl(cyclone_timer);
  95                 int stall = 100;
  96
  97                 while (stall--)
  98                         barrier();
  99
 100                 if (readl(cyclone_timer) == old) {
 101                         printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
 102                         iounmap(cyclone_timer);
 103                         cyclone_timer = NULL;
 104                         return -ENODEV;
 105                 }
 106         }
 107         cyclone_ptr = cyclone_timer;
 108
 109         return clocksource_register_hz(&clocksource_cyclone,
 110                                         CYCLONE_TIMER_FREQ);
 111 }
 112
 113 arch_initcall(init_cyclone_clocksource);