drivers/scsi/aha1740.h

   1 #ifndef _AHA1740_H
   2
   3 /* $Id$
   4  *
   5  * Header file for the adaptec 1740 driver for Linux
   6  *
   7  * With minor revisions 3/31/93
   8  * Written and (C) 1992,1993 Brad McLean.  See aha1740.c
   9  * for more info
  10  *
  11  */
  12
  13 #include <linux/types.h>
  14
  15 #define SLOTSIZE        0x5c
  16
  17 /* EISA configuration registers & values */
  18 #define HID0(base)      (base + 0x0)
  19 #define HID1(base)      (base + 0x1)
  20 #define HID2(base)      (base + 0x2)
  21 #define HID3(base)      (base + 0x3)
  22 #define EBCNTRL(base)   (base + 0x4)
  23 #define PORTADR(base)   (base + 0x40)
  24 #define BIOSADR(base)   (base + 0x41)
  25 #define INTDEF(base)    (base + 0x42)
  26 #define SCSIDEF(base)   (base + 0x43)
  27 #define BUSDEF(base)    (base + 0x44)
  28 #define RESV0(base)     (base + 0x45)
  29 #define RESV1(base)     (base + 0x46)
  30 #define RESV2(base)     (base + 0x47)
  31
  32 #define HID_MFG "ADP"
  33 #define HID_PRD 0
  34 #define HID_REV 2
  35 #define EBCNTRL_VALUE 1
  36 #define PORTADDR_ENH 0x80
  37 /* READ */
  38 #define G2INTST(base)   (base + 0x56)
  39 #define G2STAT(base)    (base + 0x57)
  40 #define MBOXIN0(base)   (base + 0x58)
  41 #define MBOXIN1(base)   (base + 0x59)
  42 #define MBOXIN2(base)   (base + 0x5a)
  43 #define MBOXIN3(base)   (base + 0x5b)
  44 #define G2STAT2(base)   (base + 0x5c)
  45
  46 #define G2INTST_MASK            0xf0    /* isolate the status */
  47 #define G2INTST_CCBGOOD         0x10    /* CCB Completed */
  48 #define G2INTST_CCBRETRY        0x50    /* CCB Completed with a retry */
  49 #define G2INTST_HARDFAIL        0x70    /* Adapter Hardware Failure */
  50 #define G2INTST_CMDGOOD         0xa0    /* Immediate command success */
  51 #define G2INTST_CCBERROR        0xc0    /* CCB Completed with error */
  52 #define G2INTST_ASNEVENT        0xd0    /* Asynchronous Event Notification */
  53 #define G2INTST_CMDERROR        0xe0    /* Immediate command error */
  54
  55 #define G2STAT_MBXOUT   4       /* Mailbox Out Empty Bit */
  56 #define G2STAT_INTPEND  2       /* Interrupt Pending Bit */
  57 #define G2STAT_BUSY     1       /* Busy Bit (attention pending) */
  58
  59 #define G2STAT2_READY   0       /* Host Ready Bit */
  60
  61 /* WRITE (and ReadBack) */
  62 #define MBOXOUT0(base)  (base + 0x50)
  63 #define MBOXOUT1(base)  (base + 0x51)
  64 #define MBOXOUT2(base)  (base + 0x52)
  65 #define MBOXOUT3(base)  (base + 0x53)
  66 #define ATTN(base)      (base + 0x54)
  67 #define G2CNTRL(base)   (base + 0x55)
  68
  69 #define ATTN_IMMED      0x10    /* Immediate Command */
  70 #define ATTN_START      0x40    /* Start CCB */
  71 #define ATTN_ABORT      0x50    /* Abort CCB */
  72
  73 #define G2CNTRL_HRST    0x80    /* Hard Reset */
  74 #define G2CNTRL_IRST    0x40    /* Clear EISA Interrupt */
  75 #define G2CNTRL_HRDY    0x20    /* Sets HOST ready */
  76
  77 /* This is used with scatter-gather */
  78 struct aha1740_chain {
  79         u32 dataptr;            /* Location of data */
  80         u32 datalen;            /* Size of this part of chain */
  81 };
  82
  83 /* These belong in scsi.h */
  84 #define any2scsi(up, p)                         \
  85 (up)[0] = (((unsigned long)(p)) >> 16)  ;       \
  86 (up)[1] = (((unsigned long)(p)) >> 8);          \
  87 (up)[2] = ((unsigned long)(p));
  88
  89 #define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
  90
  91 #define xany2scsi(up, p)        \
  92 (up)[0] = ((long)(p)) >> 24;    \
  93 (up)[1] = ((long)(p)) >> 16;    \
  94 (up)[2] = ((long)(p)) >> 8;     \
  95 (up)[3] = ((long)(p));
  96
  97 #define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
  98                       + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )
  99
 100 #define MAX_CDB 12
 101 #define MAX_SENSE 14
 102 #define MAX_STATUS 32
 103
 104 struct ecb {                    /* Enhanced Control Block 6.1 */
 105         u16 cmdw;               /* Command Word */
 106         /* Flag Word 1 */
 107         u16 cne:1,              /* Control Block Chaining */
 108         :6, di:1,               /* Disable Interrupt */
 109         :2, ses:1,              /* Suppress Underrun error */
 110         :1, sg:1,               /* Scatter/Gather */
 111         :1, dsb:1,              /* Disable Status Block */
 112          ars:1;                 /* Automatic Request Sense */
 113         /* Flag Word 2 */
 114         u16 lun:3,              /* Logical Unit */
 115          tag:1,                 /* Tagged Queuing */
 116          tt:2,                  /* Tag Type */
 117          nd:1,                  /* No Disconnect */
 118         :1, dat:1,              /* Data transfer - check direction */
 119          dir:1,                 /* Direction of transfer 1 = datain */
 120          st:1,                  /* Suppress Transfer */
 121          chk:1,                 /* Calculate Checksum */
 122         :2, rec:1,:1;           /* Error Recovery */
 123         u16 nil0;               /* nothing */
 124         u32 dataptr;            /* Data or Scatter List ptr */
 125         u32 datalen;            /* Data or Scatter List len */
 126         u32 statusptr;          /* Status Block ptr */
 127         u32 linkptr;            /* Chain Address */
 128         u32 nil1;               /* nothing */
 129         u32 senseptr;           /* Sense Info Pointer */
 130         u8 senselen;            /* Sense Length */
 131         u8 cdblen;              /* CDB Length */
 132         u16 datacheck;          /* Data checksum */
 133         u8 cdb[MAX_CDB];        /* CDB area */
 134 /* Hardware defined portion ends here, rest is driver defined */
 135         u8 sense[MAX_SENSE];    /* Sense area */
 136         u8 status[MAX_STATUS];  /* Status area */
 137         Scsi_Cmnd *SCpnt;       /* Link to the SCSI Command Block */
 138         void (*done) (Scsi_Cmnd *);     /* Completion Function */
 139 };
 140
 141 #define AHA1740CMD_NOP   0x00   /* No OP */
 142 #define AHA1740CMD_INIT  0x01   /* Initiator SCSI Command */
 143 #define AHA1740CMD_DIAG  0x05   /* Run Diagnostic Command */
 144 #define AHA1740CMD_SCSI  0x06   /* Initialize SCSI */
 145 #define AHA1740CMD_SENSE 0x08   /* Read Sense Information */
 146 #define AHA1740CMD_DOWN  0x09   /* Download Firmware (yeah, I bet!) */
 147 #define AHA1740CMD_RINQ  0x0a   /* Read Host Adapter Inquiry Data */
 148 #define AHA1740CMD_TARG  0x10   /* Target SCSI Command */
 149
 150 #define AHA1740_ECBS 32
 151 #define AHA1740_SCATTER 16
 152 #define AHA1740_CMDLUN 1
 153
 154 #endif