arch/powerpc/include/asm/io.h

   1 #ifndef _ASM_POWERPC_IO_H
   2 #define _ASM_POWERPC_IO_H
   3 #ifdef __KERNEL__
   4
   5 /*
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version
   9  * 2 of the License, or (at your option) any later version.
  10  */
  11
  12 /* Check of existence of legacy devices */
  13 extern int check_legacy_ioport(unsigned long base_port);
  14 #define I8042_DATA_REG  0x60
  15 #define FDC_BASE        0x3f0
  16 /* only relevant for PReP */
  17 #define _PIDXR          0x279
  18 #define _PNPWRP         0xa79
  19 #define PNPBIOS_BASE    0xf000
  20
  21 #include <linux/device.h>
  22 #include <linux/io.h>
  23
  24 #include <linux/compiler.h>
  25 #include <asm/page.h>
  26 #include <asm/byteorder.h>
  27 #include <asm/synch.h>
  28 #include <asm/delay.h>
  29 #include <asm/mmu.h>
  30
  31 #include <asm-generic/iomap.h>
  32
  33 #ifdef CONFIG_PPC64
  34 #include <asm/paca.h>
  35 #endif
  36
  37 #define SIO_CONFIG_RA   0x398
  38 #define SIO_CONFIG_RD   0x399
  39
  40 #define SLOW_DOWN_IO
  41
  42 /* 32 bits uses slightly different variables for the various IO
  43  * bases. Most of this file only uses _IO_BASE though which we
  44  * define properly based on the platform
  45  */
  46 #ifndef CONFIG_PCI
  47 #define _IO_BASE        0
  48 #define _ISA_MEM_BASE   0
  49 #define PCI_DRAM_OFFSET 0
  50 #elif defined(CONFIG_PPC32)
  51 #define _IO_BASE        isa_io_base
  52 #define _ISA_MEM_BASE   isa_mem_base
  53 #define PCI_DRAM_OFFSET pci_dram_offset
  54 #else
  55 #define _IO_BASE        pci_io_base
  56 #define _ISA_MEM_BASE   isa_mem_base
  57 #define PCI_DRAM_OFFSET 0
  58 #endif
  59
  60 extern unsigned long isa_io_base;
  61 extern unsigned long pci_io_base;
  62 extern unsigned long pci_dram_offset;
  63
  64 extern resource_size_t isa_mem_base;
  65
  66 #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
  67 #error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
  68 #endif
  69
  70 /*
  71  *
  72  * Low level MMIO accessors
  73  *
  74  * This provides the non-bus specific accessors to MMIO. Those are PowerPC
  75  * specific and thus shouldn't be used in generic code. The accessors
  76  * provided here are:
  77  *
  78  *      in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
  79  *      out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
  80  *      _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
  81  *
  82  * Those operate directly on a kernel virtual address. Note that the prototype
  83  * for the out_* accessors has the arguments in opposite order from the usual
  84  * linux PCI accessors. Unlike those, they take the address first and the value
  85  * next.
  86  *
  87  * Note: I might drop the _ns suffix on the stream operations soon as it is
  88  * simply normal for stream operations to not swap in the first place.
  89  *
  90  */
  91
  92 #ifdef CONFIG_PPC64
  93 #define IO_SET_SYNC_FLAG()      do { local_paca->io_sync = 1; } while(0)
  94 #else
  95 #define IO_SET_SYNC_FLAG()
  96 #endif
  97
  98 /* gcc 4.0 and older doesn't have 'Z' constraint */
  99 #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
 100 #define DEF_MMIO_IN_LE(name, size, insn)                                \
 101 static inline u##size name(const volatile u##size __iomem *addr)        \
 102 {                                                                       \
 103         u##size ret;                                                    \
 104         __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"    \
 105                 : "=r" (ret) : "r" (addr), "m" (*addr) : "memory");     \
 106         return ret;                                                     \
 107 }
 108
 109 #define DEF_MMIO_OUT_LE(name, size, insn)                               \
 110 static inline void name(volatile u##size __iomem *addr, u##size val)    \
 111 {                                                                       \
 112         __asm__ __volatile__("sync;"#insn" %1,0,%2"                     \
 113                 : "=m" (*addr) : "r" (val), "r" (addr) : "memory");     \
 114         IO_SET_SYNC_FLAG();                                             \
 115 }
 116 #else /* newer gcc */
 117 #define DEF_MMIO_IN_LE(name, size, insn)                                \
 118 static inline u##size name(const volatile u##size __iomem *addr)        \
 119 {                                                                       \
 120         u##size ret;                                                    \
 121         __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"     \
 122                 : "=r" (ret) : "Z" (*addr) : "memory");                 \
 123         return ret;                                                     \
 124 }
 125
 126 #define DEF_MMIO_OUT_LE(name, size, insn)                               \
 127 static inline void name(volatile u##size __iomem *addr, u##size val)    \
 128 {                                                                       \
 129         __asm__ __volatile__("sync;"#insn" %1,%y0"                      \
 130                 : "=Z" (*addr) : "r" (val) : "memory");                 \
 131         IO_SET_SYNC_FLAG();                                             \
 132 }
 133 #endif
 134
 135 #define DEF_MMIO_IN_BE(name, size, insn)                                \
 136 static inline u##size name(const volatile u##size __iomem *addr)        \
 137 {                                                                       \
 138         u##size ret;                                                    \
 139         __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
 140                 : "=r" (ret) : "m" (*addr) : "memory");                 \
 141         return ret;                                                     \
 142 }
 143
 144 #define DEF_MMIO_OUT_BE(name, size, insn)                               \
 145 static inline void name(volatile u##size __iomem *addr, u##size val)    \
 146 {                                                                       \
 147         __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"                 \
 148                 : "=m" (*addr) : "r" (val) : "memory");                 \
 149         IO_SET_SYNC_FLAG();                                             \
 150 }
 151
 152
 153 DEF_MMIO_IN_BE(in_8,     8, lbz);
 154 DEF_MMIO_IN_BE(in_be16, 16, lhz);
 155 DEF_MMIO_IN_BE(in_be32, 32, lwz);
 156 DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
 157 DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
 158
 159 DEF_MMIO_OUT_BE(out_8,     8, stb);
 160 DEF_MMIO_OUT_BE(out_be16, 16, sth);
 161 DEF_MMIO_OUT_BE(out_be32, 32, stw);
 162 DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
 163 DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
 164
 165 #ifdef __powerpc64__
 166 DEF_MMIO_OUT_BE(out_be64, 64, std);
 167 DEF_MMIO_IN_BE(in_be64, 64, ld);
 168
 169 /* There is no asm instructions for 64 bits reverse loads and stores */
 170 static inline u64 in_le64(const volatile u64 __iomem *addr)
 171 {
 172         return swab64(in_be64(addr));
 173 }
 174
 175 static inline void out_le64(volatile u64 __iomem *addr, u64 val)
 176 {
 177         out_be64(addr, swab64(val));
 178 }
 179 #endif /* __powerpc64__ */
 180
 181 /*
 182  * Low level IO stream instructions are defined out of line for now
 183  */
 184 extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
 185 extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
 186 extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
 187 extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
 188 extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
 189 extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
 190
 191 /* The _ns naming is historical and will be removed. For now, just #define
 192  * the non _ns equivalent names
 193  */
 194 #define _insw   _insw_ns
 195 #define _insl   _insl_ns
 196 #define _outsw  _outsw_ns
 197 #define _outsl  _outsl_ns
 198
 199
 200 /*
 201  * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
 202  */
 203
 204 extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
 205 extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
 206                            unsigned long n);
 207 extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
 208                          unsigned long n);
 209
 210 /*
 211  *
 212  * PCI and standard ISA accessors
 213  *
 214  * Those are globally defined linux accessors for devices on PCI or ISA
 215  * busses. They follow the Linux defined semantics. The current implementation
 216  * for PowerPC is as close as possible to the x86 version of these, and thus
 217  * provides fairly heavy weight barriers for the non-raw versions
 218  *
 219  * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
 220  * allowing the platform to provide its own implementation of some or all
 221  * of the accessors.
 222  */
 223
 224 /*
 225  * Include the EEH definitions when EEH is enabled only so they don't get
 226  * in the way when building for 32 bits
 227  */
 228 #ifdef CONFIG_EEH
 229 #include <asm/eeh.h>
 230 #endif
 231
 232 /* Shortcut to the MMIO argument pointer */
 233 #define PCI_IO_ADDR     volatile void __iomem *
 234
 235 /* Indirect IO address tokens:
 236  *
 237  * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
 238  * on all IOs. (Note that this is all 64 bits only for now)
 239  *
 240  * To help platforms who may need to differenciate MMIO addresses in
 241  * their hooks, a bitfield is reserved for use by the platform near the
 242  * top of MMIO addresses (not PIO, those have to cope the hard way).
 243  *
 244  * This bit field is 12 bits and is at the top of the IO virtual
 245  * addresses PCI_IO_INDIRECT_TOKEN_MASK.
 246  *
 247  * The kernel virtual space is thus:
 248  *
 249  *  0xD000000000000000          : vmalloc
 250  *  0xD000080000000000          : PCI PHB IO space
 251  *  0xD000080080000000          : ioremap
 252  *  0xD0000fffffffffff          : end of ioremap region
 253  *
 254  * Since the top 4 bits are reserved as the region ID, we use thus
 255  * the next 12 bits and keep 4 bits available for the future if the
 256  * virtual address space is ever to be extended.
 257  *
 258  * The direct IO mapping operations will then mask off those bits
 259  * before doing the actual access, though that only happen when
 260  * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
 261  * mechanism
 262  */
 263
 264 #ifdef CONFIG_PPC_INDIRECT_IO
 265 #define PCI_IO_IND_TOKEN_MASK   0x0fff000000000000ul
 266 #define PCI_IO_IND_TOKEN_SHIFT  48
 267 #define PCI_FIX_ADDR(addr)                                              \
 268         ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
 269 #define PCI_GET_ADDR_TOKEN(addr)                                        \
 270         (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >>             \
 271                 PCI_IO_IND_TOKEN_SHIFT)
 272 #define PCI_SET_ADDR_TOKEN(addr, token)                                 \
 273 do {                                                                    \
 274         unsigned long __a = (unsigned long)(addr);                      \
 275         __a &= ~PCI_IO_IND_TOKEN_MASK;                                  \
 276         __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;      \
 277         (addr) = (void __iomem *)__a;                                   \
 278 } while(0)
 279 #else
 280 #define PCI_FIX_ADDR(addr) (addr)
 281 #endif
 282
 283
 284 /*
 285  * Non ordered and non-swapping "raw" accessors
 286  */
 287
 288 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
 289 {
 290         return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
 291 }
 292 static inline unsigned short __raw_readw(const volatile void __iomem *addr)
 293 {
 294         return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
 295 }
 296 static inline unsigned int __raw_readl(const volatile void __iomem *addr)
 297 {
 298         return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
 299 }
 300 static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
 301 {
 302         *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
 303 }
 304 static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
 305 {
 306         *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
 307 }
 308 static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
 309 {
 310         *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
 311 }
 312
 313 #ifdef __powerpc64__
 314 static inline unsigned long __raw_readq(const volatile void __iomem *addr)
 315 {
 316         return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
 317 }
 318 static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
 319 {
 320         *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
 321 }
 322 #endif /* __powerpc64__ */
 323
 324 /*
 325  *
 326  * PCI PIO and MMIO accessors.
 327  *
 328  *
 329  * On 32 bits, PIO operations have a recovery mechanism in case they trigger
 330  * machine checks (which they occasionally do when probing non existing
 331  * IO ports on some platforms, like PowerMac and 8xx).
 332  * I always found it to be of dubious reliability and I am tempted to get
 333  * rid of it one of these days. So if you think it's important to keep it,
 334  * please voice up asap. We never had it for 64 bits and I do not intend
 335  * to port it over
 336  */
 337
 338 #ifdef CONFIG_PPC32
 339
 340 #define __do_in_asm(name, op)                           \
 341 static inline unsigned int name(unsigned int port)      \
 342 {                                                       \
 343         unsigned int x;                                 \
 344         __asm__ __volatile__(                           \
 345                 "sync\n"                                \
 346                 "0:"    op "    %0,0,%1\n"              \
 347                 "1:     twi     0,%0,0\n"               \
 348                 "2:     isync\n"                        \
 349                 "3:     nop\n"                          \
 350                 "4:\n"                                  \
 351                 ".section .fixup,\"ax\"\n"              \
 352                 "5:     li      %0,-1\n"                \
 353                 "       b       4b\n"                   \
 354                 ".previous\n"                           \
 355                 ".section __ex_table,\"a\"\n"           \
 356                 "       .align  2\n"                    \
 357                 "       .long   0b,5b\n"                \
 358                 "       .long   1b,5b\n"                \
 359                 "       .long   2b,5b\n"                \
 360                 "       .long   3b,5b\n"                \
 361                 ".previous"                             \
 362                 : "=&r" (x)                             \
 363                 : "r" (port + _IO_BASE)                 \
 364                 : "memory");                            \
 365         return x;                                       \
 366 }
 367
 368 #define __do_out_asm(name, op)                          \
 369 static inline void name(unsigned int val, unsigned int port) \
 370 {                                                       \
 371         __asm__ __volatile__(                           \
 372                 "sync\n"                                \
 373                 "0:" op " %0,0,%1\n"                    \
 374                 "1:     sync\n"                         \
 375                 "2:\n"                                  \
 376                 ".section __ex_table,\"a\"\n"           \
 377                 "       .align  2\n"                    \
 378                 "       .long   0b,2b\n"                \
 379                 "       .long   1b,2b\n"                \
 380                 ".previous"                             \
 381                 : : "r" (val), "r" (port + _IO_BASE)    \
 382                 : "memory");                            \
 383 }
 384
 385 __do_in_asm(_rec_inb, "lbzx")
 386 __do_in_asm(_rec_inw, "lhbrx")
 387 __do_in_asm(_rec_inl, "lwbrx")
 388 __do_out_asm(_rec_outb, "stbx")
 389 __do_out_asm(_rec_outw, "sthbrx")
 390 __do_out_asm(_rec_outl, "stwbrx")
 391
 392 #endif /* CONFIG_PPC32 */
 393
 394 /* The "__do_*" operations below provide the actual "base" implementation
 395  * for each of the defined acccessor. Some of them use the out_* functions
 396  * directly, some of them still use EEH, though we might change that in the
 397  * future. Those macros below provide the necessary argument swapping and
 398  * handling of the IO base for PIO.
 399  *
 400  * They are themselves used by the macros that define the actual accessors
 401  * and can be used by the hooks if any.
 402  *
 403  * Note that PIO operations are always defined in terms of their corresonding
 404  * MMIO operations. That allows platforms like iSeries who want to modify the
 405  * behaviour of both to only hook on the MMIO version and get both. It's also
 406  * possible to hook directly at the toplevel PIO operation if they have to
 407  * be handled differently
 408  */
 409 #define __do_writeb(val, addr)  out_8(PCI_FIX_ADDR(addr), val)
 410 #define __do_writew(val, addr)  out_le16(PCI_FIX_ADDR(addr), val)
 411 #define __do_writel(val, addr)  out_le32(PCI_FIX_ADDR(addr), val)
 412 #define __do_writeq(val, addr)  out_le64(PCI_FIX_ADDR(addr), val)
 413 #define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
 414 #define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
 415 #define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
 416
 417 #ifdef CONFIG_EEH
 418 #define __do_readb(addr)        eeh_readb(PCI_FIX_ADDR(addr))
 419 #define __do_readw(addr)        eeh_readw(PCI_FIX_ADDR(addr))
 420 #define __do_readl(addr)        eeh_readl(PCI_FIX_ADDR(addr))
 421 #define __do_readq(addr)        eeh_readq(PCI_FIX_ADDR(addr))
 422 #define __do_readw_be(addr)     eeh_readw_be(PCI_FIX_ADDR(addr))
 423 #define __do_readl_be(addr)     eeh_readl_be(PCI_FIX_ADDR(addr))
 424 #define __do_readq_be(addr)     eeh_readq_be(PCI_FIX_ADDR(addr))
 425 #else /* CONFIG_EEH */
 426 #define __do_readb(addr)        in_8(PCI_FIX_ADDR(addr))
 427 #define __do_readw(addr)        in_le16(PCI_FIX_ADDR(addr))
 428 #define __do_readl(addr)        in_le32(PCI_FIX_ADDR(addr))
 429 #define __do_readq(addr)        in_le64(PCI_FIX_ADDR(addr))
 430 #define __do_readw_be(addr)     in_be16(PCI_FIX_ADDR(addr))
 431 #define __do_readl_be(addr)     in_be32(PCI_FIX_ADDR(addr))
 432 #define __do_readq_be(addr)     in_be64(PCI_FIX_ADDR(addr))
 433 #endif /* !defined(CONFIG_EEH) */
 434
 435 #ifdef CONFIG_PPC32
 436 #define __do_outb(val, port)    _rec_outb(val, port)
 437 #define __do_outw(val, port)    _rec_outw(val, port)
 438 #define __do_outl(val, port)    _rec_outl(val, port)
 439 #define __do_inb(port)          _rec_inb(port)
 440 #define __do_inw(port)          _rec_inw(port)
 441 #define __do_inl(port)          _rec_inl(port)
 442 #else /* CONFIG_PPC32 */
 443 #define __do_outb(val, port)    writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
 444 #define __do_outw(val, port)    writew(val,(PCI_IO_ADDR)_IO_BASE+port);
 445 #define __do_outl(val, port)    writel(val,(PCI_IO_ADDR)_IO_BASE+port);
 446 #define __do_inb(port)          readb((PCI_IO_ADDR)_IO_BASE + port);
 447 #define __do_inw(port)          readw((PCI_IO_ADDR)_IO_BASE + port);
 448 #define __do_inl(port)          readl((PCI_IO_ADDR)_IO_BASE + port);
 449 #endif /* !CONFIG_PPC32 */
 450
 451 #ifdef CONFIG_EEH
 452 #define __do_readsb(a, b, n)    eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
 453 #define __do_readsw(a, b, n)    eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
 454 #define __do_readsl(a, b, n)    eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
 455 #else /* CONFIG_EEH */
 456 #define __do_readsb(a, b, n)    _insb(PCI_FIX_ADDR(a), (b), (n))
 457 #define __do_readsw(a, b, n)    _insw(PCI_FIX_ADDR(a), (b), (n))
 458 #define __do_readsl(a, b, n)    _insl(PCI_FIX_ADDR(a), (b), (n))
 459 #endif /* !CONFIG_EEH */
 460 #define __do_writesb(a, b, n)   _outsb(PCI_FIX_ADDR(a),(b),(n))
 461 #define __do_writesw(a, b, n)   _outsw(PCI_FIX_ADDR(a),(b),(n))
 462 #define __do_writesl(a, b, n)   _outsl(PCI_FIX_ADDR(a),(b),(n))
 463
 464 #define __do_insb(p, b, n)      readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
 465 #define __do_insw(p, b, n)      readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
 466 #define __do_insl(p, b, n)      readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
 467 #define __do_outsb(p, b, n)     writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
 468 #define __do_outsw(p, b, n)     writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
 469 #define __do_outsl(p, b, n)     writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
 470
 471 #define __do_memset_io(addr, c, n)      \
 472                                 _memset_io(PCI_FIX_ADDR(addr), c, n)
 473 #define __do_memcpy_toio(dst, src, n)   \
 474                                 _memcpy_toio(PCI_FIX_ADDR(dst), src, n)
 475
 476 #ifdef CONFIG_EEH
 477 #define __do_memcpy_fromio(dst, src, n) \
 478                                 eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
 479 #else /* CONFIG_EEH */
 480 #define __do_memcpy_fromio(dst, src, n) \
 481                                 _memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
 482 #endif /* !CONFIG_EEH */
 483
 484 #ifdef CONFIG_PPC_INDIRECT_IO
 485 #define DEF_PCI_HOOK(x)         x
 486 #else
 487 #define DEF_PCI_HOOK(x)         NULL
 488 #endif
 489
 490 /* Structure containing all the hooks */
 491 extern struct ppc_pci_io {
 492
 493 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)    ret (*name) at;
 494 #define DEF_PCI_AC_NORET(name, at, al, space, aa)       void (*name) at;
 495
 496 #include <asm/io-defs.h>
 497
 498 #undef DEF_PCI_AC_RET
 499 #undef DEF_PCI_AC_NORET
 500
 501 } ppc_pci_io;
 502
 503 /* The inline wrappers */
 504 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)            \
 505 static inline ret name at                                       \
 506 {                                                               \
 507         if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)              \
 508                 return ppc_pci_io.name al;                      \
 509         return __do_##name al;                                  \
 510 }
 511
 512 #define DEF_PCI_AC_NORET(name, at, al, space, aa)               \
 513 static inline void name at                                      \
 514 {                                                               \
 515         if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)              \
 516                 ppc_pci_io.name al;                             \
 517         else                                                    \
 518                 __do_##name al;                                 \
 519 }
 520
 521 #include <asm/io-defs.h>
 522
 523 #undef DEF_PCI_AC_RET
 524 #undef DEF_PCI_AC_NORET
 525
 526 /* Some drivers check for the presence of readq & writeq with
 527  * a #ifdef, so we make them happy here.
 528  */
 529 #ifdef __powerpc64__
 530 #define readq   readq
 531 #define writeq  writeq
 532 #endif
 533
 534 /*
 535  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
 536  * access
 537  */
 538 #define xlate_dev_mem_ptr(p)    __va(p)
 539
 540 /*
 541  * Convert a virtual cached pointer to an uncached pointer
 542  */
 543 #define xlate_dev_kmem_ptr(p)   p
 544
 545 /*
 546  * We don't do relaxed operations yet, at least not with this semantic
 547  */
 548 #define readb_relaxed(addr) readb(addr)
 549 #define readw_relaxed(addr) readw(addr)
 550 #define readl_relaxed(addr) readl(addr)
 551 #define readq_relaxed(addr) readq(addr)
 552
 553 #ifdef CONFIG_PPC32
 554 #define mmiowb()
 555 #else
 556 /*
 557  * Enforce synchronisation of stores vs. spin_unlock
 558  * (this does it explicitly, though our implementation of spin_unlock
 559  * does it implicitely too)
 560  */
 561 static inline void mmiowb(void)
 562 {
 563         unsigned long tmp;
 564
 565         __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
 566         : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
 567         : "memory");
 568 }
 569 #endif /* !CONFIG_PPC32 */
 570
 571 static inline void iosync(void)
 572 {
 573         __asm__ __volatile__ ("sync" : : : "memory");
 574 }
 575
 576 /* Enforce in-order execution of data I/O.
 577  * No distinction between read/write on PPC; use eieio for all three.
 578  * Those are fairly week though. They don't provide a barrier between
 579  * MMIO and cacheable storage nor do they provide a barrier vs. locks,
 580  * they only provide barriers between 2 __raw MMIO operations and
 581  * possibly break write combining.
 582  */
 583 #define iobarrier_rw() eieio()
 584 #define iobarrier_r()  eieio()
 585 #define iobarrier_w()  eieio()
 586
 587
 588 /*
 589  * output pause versions need a delay at least for the
 590  * w83c105 ide controller in a p610.
 591  */
 592 #define inb_p(port)             inb(port)
 593 #define outb_p(val, port)       (udelay(1), outb((val), (port)))
 594 #define inw_p(port)             inw(port)
 595 #define outw_p(val, port)       (udelay(1), outw((val), (port)))
 596 #define inl_p(port)             inl(port)
 597 #define outl_p(val, port)       (udelay(1), outl((val), (port)))
 598
 599
 600 #define IO_SPACE_LIMIT ~(0UL)
 601
 602
 603 /**
 604  * ioremap     -   map bus memory into CPU space
 605  * @address:   bus address of the memory
 606  * @size:      size of the resource to map
 607  *
 608  * ioremap performs a platform specific sequence of operations to
 609  * make bus memory CPU accessible via the readb/readw/readl/writeb/
 610  * writew/writel functions and the other mmio helpers. The returned
 611  * address is not guaranteed to be usable directly as a virtual
 612  * address.
 613  *
 614  * We provide a few variations of it:
 615  *
 616  * * ioremap is the standard one and provides non-cacheable guarded mappings
 617  *   and can be hooked by the platform via ppc_md
 618  *
 619  * * ioremap_flags allows to specify the page flags as an argument and can
 620  *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
 621  *   same thing as ioremap_flags.
 622  *
 623  * * ioremap_nocache is identical to ioremap
 624  *
 625  * * iounmap undoes such a mapping and can be hooked
 626  *
 627  * * __ioremap_at (and the pending __iounmap_at) are low level functions to
 628  *   create hand-made mappings for use only by the PCI code and cannot
 629  *   currently be hooked. Must be page aligned.
 630  *
 631  * * __ioremap is the low level implementation used by ioremap and
 632  *   ioremap_flags and cannot be hooked (but can be used by a hook on one
 633  *   of the previous ones)
 634  *
 635  * * __ioremap_caller is the same as above but takes an explicit caller
 636  *   reference rather than using __builtin_return_address(0)
 637  *
 638  * * __iounmap, is the low level implementation used by iounmap and cannot
 639  *   be hooked (but can be used by a hook on iounmap)
 640  *
 641  */
 642 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
 643 extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
 644                                    unsigned long flags);
 645 #define ioremap_nocache(addr, size)     ioremap((addr), (size))
 646 #define ioremap_prot(addr, size, prot)  ioremap_flags((addr), (size), (prot))
 647
 648 extern void iounmap(volatile void __iomem *addr);
 649
 650 extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
 651                                unsigned long flags);
 652 extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
 653                                       unsigned long flags, void *caller);
 654
 655 extern void __iounmap(volatile void __iomem *addr);
 656
 657 extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
 658                                    unsigned long size, unsigned long flags);
 659 extern void __iounmap_at(void *ea, unsigned long size);
 660
 661 /*
 662  * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
 663  * which needs some additional definitions here. They basically allow PIO
 664  * space overall to be 1GB. This will work as long as we never try to use
 665  * iomap to map MMIO below 1GB which should be fine on ppc64
 666  */
 667 #define HAVE_ARCH_PIO_SIZE              1
 668 #define PIO_OFFSET                      0x00000000UL
 669 #define PIO_MASK                        (FULL_IO_SIZE - 1)
 670 #define PIO_RESERVED                    (FULL_IO_SIZE)
 671
 672 #define mmio_read16be(addr)             readw_be(addr)
 673 #define mmio_read32be(addr)             readl_be(addr)
 674 #define mmio_write16be(val, addr)       writew_be(val, addr)
 675 #define mmio_write32be(val, addr)       writel_be(val, addr)
 676 #define mmio_insb(addr, dst, count)     readsb(addr, dst, count)
 677 #define mmio_insw(addr, dst, count)     readsw(addr, dst, count)
 678 #define mmio_insl(addr, dst, count)     readsl(addr, dst, count)
 679 #define mmio_outsb(addr, src, count)    writesb(addr, src, count)
 680 #define mmio_outsw(addr, src, count)    writesw(addr, src, count)
 681 #define mmio_outsl(addr, src, count)    writesl(addr, src, count)
 682
 683 /**
 684  *      virt_to_phys    -       map virtual addresses to physical
 685  *      @address: address to remap
 686  *
 687  *      The returned physical address is the physical (CPU) mapping for
 688  *      the memory address given. It is only valid to use this function on
 689  *      addresses directly mapped or allocated via kmalloc.
 690  *
 691  *      This function does not give bus mappings for DMA transfers. In
 692  *      almost all conceivable cases a device driver should not be using
 693  *      this function
 694  */
 695 static inline unsigned long virt_to_phys(volatile void * address)
 696 {
 697         return __pa((unsigned long)address);
 698 }
 699
 700 /**
 701  *      phys_to_virt    -       map physical address to virtual
 702  *      @address: address to remap
 703  *
 704  *      The returned virtual address is a current CPU mapping for
 705  *      the memory address given. It is only valid to use this function on
 706  *      addresses that have a kernel mapping
 707  *
 708  *      This function does not handle bus mappings for DMA transfers. In
 709  *      almost all conceivable cases a device driver should not be using
 710  *      this function
 711  */
 712 static inline void * phys_to_virt(unsigned long address)
 713 {
 714         return (void *)__va(address);
 715 }
 716
 717 /*
 718  * Change "struct page" to physical address.
 719  */
 720 #define page_to_phys(page)      ((phys_addr_t)page_to_pfn(page) << PAGE_SHIFT)
 721
 722 /*
 723  * 32 bits still uses virt_to_bus() for it's implementation of DMA
 724  * mappings se we have to keep it defined here. We also have some old
 725  * drivers (shame shame shame) that use bus_to_virt() and haven't been
 726  * fixed yet so I need to define it here.
 727  */
 728 #ifdef CONFIG_PPC32
 729
 730 static inline unsigned long virt_to_bus(volatile void * address)
 731 {
 732         if (address == NULL)
 733                 return 0;
 734         return __pa(address) + PCI_DRAM_OFFSET;
 735 }
 736
 737 static inline void * bus_to_virt(unsigned long address)
 738 {
 739         if (address == 0)
 740                 return NULL;
 741         return __va(address - PCI_DRAM_OFFSET);
 742 }
 743
 744 #define page_to_bus(page)       (page_to_phys(page) + PCI_DRAM_OFFSET)
 745
 746 #endif /* CONFIG_PPC32 */
 747
 748 /* access ports */
 749 #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
 750 #define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
 751
 752 #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
 753 #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
 754
 755 #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
 756 #define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
 757
 758 /* Clear and set bits in one shot.  These macros can be used to clear and
 759  * set multiple bits in a register using a single read-modify-write.  These
 760  * macros can also be used to set a multiple-bit bit pattern using a mask,
 761  * by specifying the mask in the 'clear' parameter and the new bit pattern
 762  * in the 'set' parameter.
 763  */
 764
 765 #define clrsetbits(type, addr, clear, set) \
 766         out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
 767
 768 #ifdef __powerpc64__
 769 #define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
 770 #define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
 771 #endif
 772
 773 #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
 774 #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
 775
 776 #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
 777 #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
 778
 779 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
 780
 781 void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
 782                                 size_t size, unsigned long flags);
 783
 784 #endif /* __KERNEL__ */
 785
 786 #endif /* _ASM_POWERPC_IO_H */