Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / arch / arm / mach-pxa / lpd270.c
blobcee9ce2fc0b5caf9f806d815e8c036739ef4e4e6
1 /*
2 * linux/arch/arm/mach-pxa/lpd270.c
4 * Support for the LogicPD PXA270 Card Engine.
5 * Derived from the mainstone code, which carries these notices:
7 * Author: Nicolas Pitre
8 * Created: Nov 05, 2002
9 * Copyright: MontaVista Software Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
15 #include <linux/gpio.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/syscore_ops.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26 #include <linux/pwm_backlight.h>
28 #include <asm/types.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <mach/hardware.h>
33 #include <asm/irq.h>
34 #include <asm/sizes.h>
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
41 #include <mach/pxa27x.h>
42 #include <mach/lpd270.h>
43 #include <mach/audio.h>
44 #include <mach/pxafb.h>
45 #include <mach/mmc.h>
46 #include <mach/irda.h>
47 #include <mach/ohci.h>
48 #include <mach/smemc.h>
50 #include "generic.h"
51 #include "devices.h"
53 static unsigned long lpd270_pin_config[] __initdata = {
54 /* Chip Selects */
55 GPIO15_nCS_1, /* Mainboard Flash */
56 GPIO78_nCS_2, /* CPLD + Ethernet */
58 /* LCD - 16bpp Active TFT */
59 GPIO58_LCD_LDD_0,
60 GPIO59_LCD_LDD_1,
61 GPIO60_LCD_LDD_2,
62 GPIO61_LCD_LDD_3,
63 GPIO62_LCD_LDD_4,
64 GPIO63_LCD_LDD_5,
65 GPIO64_LCD_LDD_6,
66 GPIO65_LCD_LDD_7,
67 GPIO66_LCD_LDD_8,
68 GPIO67_LCD_LDD_9,
69 GPIO68_LCD_LDD_10,
70 GPIO69_LCD_LDD_11,
71 GPIO70_LCD_LDD_12,
72 GPIO71_LCD_LDD_13,
73 GPIO72_LCD_LDD_14,
74 GPIO73_LCD_LDD_15,
75 GPIO74_LCD_FCLK,
76 GPIO75_LCD_LCLK,
77 GPIO76_LCD_PCLK,
78 GPIO77_LCD_BIAS,
79 GPIO16_PWM0_OUT, /* Backlight */
81 /* USB Host */
82 GPIO88_USBH1_PWR,
83 GPIO89_USBH1_PEN,
85 /* AC97 */
86 GPIO28_AC97_BITCLK,
87 GPIO29_AC97_SDATA_IN_0,
88 GPIO30_AC97_SDATA_OUT,
89 GPIO31_AC97_SYNC,
90 GPIO45_AC97_SYSCLK,
92 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
95 static unsigned int lpd270_irq_enabled;
97 static void lpd270_mask_irq(struct irq_data *d)
99 int lpd270_irq = d->irq - LPD270_IRQ(0);
101 __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
103 lpd270_irq_enabled &= ~(1 << lpd270_irq);
104 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
107 static void lpd270_unmask_irq(struct irq_data *d)
109 int lpd270_irq = d->irq - LPD270_IRQ(0);
111 lpd270_irq_enabled |= 1 << lpd270_irq;
112 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
115 static struct irq_chip lpd270_irq_chip = {
116 .name = "CPLD",
117 .irq_ack = lpd270_mask_irq,
118 .irq_mask = lpd270_mask_irq,
119 .irq_unmask = lpd270_unmask_irq,
122 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
124 unsigned long pending;
126 pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
127 do {
128 /* clear useless edge notification */
129 desc->irq_data.chip->irq_ack(&desc->irq_data);
130 if (likely(pending)) {
131 irq = LPD270_IRQ(0) + __ffs(pending);
132 generic_handle_irq(irq);
134 pending = __raw_readw(LPD270_INT_STATUS) &
135 lpd270_irq_enabled;
137 } while (pending);
140 static void __init lpd270_init_irq(void)
142 int irq;
144 pxa27x_init_irq();
146 __raw_writew(0, LPD270_INT_MASK);
147 __raw_writew(0, LPD270_INT_STATUS);
149 /* setup extra LogicPD PXA270 irqs */
150 for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
151 irq_set_chip_and_handler(irq, &lpd270_irq_chip,
152 handle_level_irq);
153 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
155 irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
156 irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
160 #ifdef CONFIG_PM
161 static void lpd270_irq_resume(void)
163 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
166 static struct syscore_ops lpd270_irq_syscore_ops = {
167 .resume = lpd270_irq_resume,
170 static int __init lpd270_irq_device_init(void)
172 if (machine_is_logicpd_pxa270()) {
173 register_syscore_ops(&lpd270_irq_syscore_ops);
174 return 0;
176 return -ENODEV;
179 device_initcall(lpd270_irq_device_init);
180 #endif
183 static struct resource smc91x_resources[] = {
184 [0] = {
185 .start = LPD270_ETH_PHYS,
186 .end = (LPD270_ETH_PHYS + 0xfffff),
187 .flags = IORESOURCE_MEM,
189 [1] = {
190 .start = LPD270_ETHERNET_IRQ,
191 .end = LPD270_ETHERNET_IRQ,
192 .flags = IORESOURCE_IRQ,
196 static struct platform_device smc91x_device = {
197 .name = "smc91x",
198 .id = 0,
199 .num_resources = ARRAY_SIZE(smc91x_resources),
200 .resource = smc91x_resources,
203 static struct resource lpd270_flash_resources[] = {
204 [0] = {
205 .start = PXA_CS0_PHYS,
206 .end = PXA_CS0_PHYS + SZ_64M - 1,
207 .flags = IORESOURCE_MEM,
209 [1] = {
210 .start = PXA_CS1_PHYS,
211 .end = PXA_CS1_PHYS + SZ_64M - 1,
212 .flags = IORESOURCE_MEM,
216 static struct mtd_partition lpd270_flash0_partitions[] = {
218 .name = "Bootloader",
219 .size = 0x00040000,
220 .offset = 0,
221 .mask_flags = MTD_WRITEABLE /* force read-only */
222 }, {
223 .name = "Kernel",
224 .size = 0x00400000,
225 .offset = 0x00040000,
226 }, {
227 .name = "Filesystem",
228 .size = MTDPART_SIZ_FULL,
229 .offset = 0x00440000
233 static struct flash_platform_data lpd270_flash_data[2] = {
235 .name = "processor-flash",
236 .map_name = "cfi_probe",
237 .parts = lpd270_flash0_partitions,
238 .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
239 }, {
240 .name = "mainboard-flash",
241 .map_name = "cfi_probe",
242 .parts = NULL,
243 .nr_parts = 0,
247 static struct platform_device lpd270_flash_device[2] = {
249 .name = "pxa2xx-flash",
250 .id = 0,
251 .dev = {
252 .platform_data = &lpd270_flash_data[0],
254 .resource = &lpd270_flash_resources[0],
255 .num_resources = 1,
256 }, {
257 .name = "pxa2xx-flash",
258 .id = 1,
259 .dev = {
260 .platform_data = &lpd270_flash_data[1],
262 .resource = &lpd270_flash_resources[1],
263 .num_resources = 1,
267 static struct platform_pwm_backlight_data lpd270_backlight_data = {
268 .pwm_id = 0,
269 .max_brightness = 1,
270 .dft_brightness = 1,
271 .pwm_period_ns = 78770,
274 static struct platform_device lpd270_backlight_device = {
275 .name = "pwm-backlight",
276 .dev = {
277 .parent = &pxa27x_device_pwm0.dev,
278 .platform_data = &lpd270_backlight_data,
282 /* 5.7" TFT QVGA (LoLo display number 1) */
283 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
284 .pixclock = 150000,
285 .xres = 320,
286 .yres = 240,
287 .bpp = 16,
288 .hsync_len = 0x14,
289 .left_margin = 0x28,
290 .right_margin = 0x0a,
291 .vsync_len = 0x02,
292 .upper_margin = 0x08,
293 .lower_margin = 0x14,
294 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
297 static struct pxafb_mach_info sharp_lq057q3dc02 = {
298 .modes = &sharp_lq057q3dc02_mode,
299 .num_modes = 1,
300 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
301 LCD_ALTERNATE_MAPPING,
304 /* 12.1" TFT SVGA (LoLo display number 2) */
305 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
306 .pixclock = 50000,
307 .xres = 800,
308 .yres = 600,
309 .bpp = 16,
310 .hsync_len = 0x05,
311 .left_margin = 0x52,
312 .right_margin = 0x05,
313 .vsync_len = 0x04,
314 .upper_margin = 0x14,
315 .lower_margin = 0x0a,
316 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
319 static struct pxafb_mach_info sharp_lq121s1dg31 = {
320 .modes = &sharp_lq121s1dg31_mode,
321 .num_modes = 1,
322 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
323 LCD_ALTERNATE_MAPPING,
326 /* 3.6" TFT QVGA (LoLo display number 3) */
327 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
328 .pixclock = 150000,
329 .xres = 320,
330 .yres = 240,
331 .bpp = 16,
332 .hsync_len = 0x0e,
333 .left_margin = 0x04,
334 .right_margin = 0x0a,
335 .vsync_len = 0x03,
336 .upper_margin = 0x03,
337 .lower_margin = 0x03,
338 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
341 static struct pxafb_mach_info sharp_lq036q1da01 = {
342 .modes = &sharp_lq036q1da01_mode,
343 .num_modes = 1,
344 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
345 LCD_ALTERNATE_MAPPING,
348 /* 6.4" TFT VGA (LoLo display number 5) */
349 static struct pxafb_mode_info sharp_lq64d343_mode = {
350 .pixclock = 25000,
351 .xres = 640,
352 .yres = 480,
353 .bpp = 16,
354 .hsync_len = 0x31,
355 .left_margin = 0x89,
356 .right_margin = 0x19,
357 .vsync_len = 0x12,
358 .upper_margin = 0x22,
359 .lower_margin = 0x00,
360 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
363 static struct pxafb_mach_info sharp_lq64d343 = {
364 .modes = &sharp_lq64d343_mode,
365 .num_modes = 1,
366 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
367 LCD_ALTERNATE_MAPPING,
370 /* 10.4" TFT VGA (LoLo display number 7) */
371 static struct pxafb_mode_info sharp_lq10d368_mode = {
372 .pixclock = 25000,
373 .xres = 640,
374 .yres = 480,
375 .bpp = 16,
376 .hsync_len = 0x31,
377 .left_margin = 0x89,
378 .right_margin = 0x19,
379 .vsync_len = 0x12,
380 .upper_margin = 0x22,
381 .lower_margin = 0x00,
382 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
385 static struct pxafb_mach_info sharp_lq10d368 = {
386 .modes = &sharp_lq10d368_mode,
387 .num_modes = 1,
388 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
389 LCD_ALTERNATE_MAPPING,
392 /* 3.5" TFT QVGA (LoLo display number 8) */
393 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
394 .pixclock = 150000,
395 .xres = 240,
396 .yres = 320,
397 .bpp = 16,
398 .hsync_len = 0x0e,
399 .left_margin = 0x0a,
400 .right_margin = 0x0a,
401 .vsync_len = 0x03,
402 .upper_margin = 0x05,
403 .lower_margin = 0x14,
404 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
407 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
408 .modes = &sharp_lq035q7db02_20_mode,
409 .num_modes = 1,
410 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
411 LCD_ALTERNATE_MAPPING,
414 static struct pxafb_mach_info *lpd270_lcd_to_use;
416 static int __init lpd270_set_lcd(char *str)
418 if (!strnicmp(str, "lq057q3dc02", 11)) {
419 lpd270_lcd_to_use = &sharp_lq057q3dc02;
420 } else if (!strnicmp(str, "lq121s1dg31", 11)) {
421 lpd270_lcd_to_use = &sharp_lq121s1dg31;
422 } else if (!strnicmp(str, "lq036q1da01", 11)) {
423 lpd270_lcd_to_use = &sharp_lq036q1da01;
424 } else if (!strnicmp(str, "lq64d343", 8)) {
425 lpd270_lcd_to_use = &sharp_lq64d343;
426 } else if (!strnicmp(str, "lq10d368", 8)) {
427 lpd270_lcd_to_use = &sharp_lq10d368;
428 } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
429 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
430 } else {
431 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
434 return 1;
437 __setup("lcd=", lpd270_set_lcd);
439 static struct platform_device *platform_devices[] __initdata = {
440 &smc91x_device,
441 &lpd270_backlight_device,
442 &lpd270_flash_device[0],
443 &lpd270_flash_device[1],
446 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
447 .port_mode = PMM_PERPORT_MODE,
448 .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
451 static void __init lpd270_init(void)
453 pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
455 pxa_set_ffuart_info(NULL);
456 pxa_set_btuart_info(NULL);
457 pxa_set_stuart_info(NULL);
459 lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
460 lpd270_flash_data[1].width = 4;
463 * System bus arbiter setting:
464 * - Core_Park
465 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
467 ARB_CNTRL = ARB_CORE_PARK | 0x234;
469 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
471 pxa_set_ac97_info(NULL);
473 if (lpd270_lcd_to_use != NULL)
474 pxa_set_fb_info(NULL, lpd270_lcd_to_use);
476 pxa_set_ohci_info(&lpd270_ohci_platform_data);
480 static struct map_desc lpd270_io_desc[] __initdata = {
482 .virtual = (unsigned long)LPD270_CPLD_VIRT,
483 .pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
484 .length = LPD270_CPLD_SIZE,
485 .type = MT_DEVICE,
489 static void __init lpd270_map_io(void)
491 pxa27x_map_io();
492 iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
494 /* for use I SRAM as framebuffer. */
495 PSLR |= 0x00000F04;
496 PCFR = 0x00000066;
499 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
500 /* Maintainer: Peter Barada */
501 .atag_offset = 0x100,
502 .map_io = lpd270_map_io,
503 .nr_irqs = LPD270_NR_IRQS,
504 .init_irq = lpd270_init_irq,
505 .handle_irq = pxa27x_handle_irq,
506 .timer = &pxa_timer,
507 .init_machine = lpd270_init,
508 .restart = pxa_restart,
509 MACHINE_END