drivers/ata/sata_vsc.c

   1 /*
   2  *  sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
   3  *
   4  *  Maintained by:  Jeremy Higdon @ SGI
   5  *                  Please ALWAYS copy linux-ide@vger.kernel.org
   6  *                  on emails.
   7  *
   8  *  Copyright 2004 SGI
   9  *
  10  *  Bits from Jeff Garzik, Copyright RedHat, Inc.
  11  *
  12  *
  13  *  This program is free software; you can redistribute it and/or modify
  14  *  it under the terms of the GNU General Public License as published by
  15  *  the Free Software Foundation; either version 2, or (at your option)
  16  *  any later version.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License
  24  *  along with this program; see the file COPYING.  If not, write to
  25  *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  26  *
  27  *
  28  *  libata documentation is available via 'make {ps|pdf}docs',
  29  *  as Documentation/DocBook/libata.*
  30  *
  31  *  Vitesse hardware documentation presumably available under NDA.
  32  *  Intel 31244 (same hardware interface) documentation presumably
  33  *  available from http://developer.intel.com/
  34  *
  35  */
  36
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/pci.h>
  40 #include <linux/init.h>
  41 #include <linux/blkdev.h>
  42 #include <linux/delay.h>
  43 #include <linux/interrupt.h>
  44 #include <linux/dma-mapping.h>
  45 #include <linux/device.h>
  46 #include <scsi/scsi_host.h>
  47 #include <linux/libata.h>
  48
  49 #define DRV_NAME        "sata_vsc"
  50 #define DRV_VERSION     "2.3"
  51
  52 enum {
  53         VSC_MMIO_BAR                    = 0,
  54
  55         /* Interrupt register offsets (from chip base address) */
  56         VSC_SATA_INT_STAT_OFFSET        = 0x00,
  57         VSC_SATA_INT_MASK_OFFSET        = 0x04,
  58
  59         /* Taskfile registers offsets */
  60         VSC_SATA_TF_CMD_OFFSET          = 0x00,
  61         VSC_SATA_TF_DATA_OFFSET         = 0x00,
  62         VSC_SATA_TF_ERROR_OFFSET        = 0x04,
  63         VSC_SATA_TF_FEATURE_OFFSET      = 0x06,
  64         VSC_SATA_TF_NSECT_OFFSET        = 0x08,
  65         VSC_SATA_TF_LBAL_OFFSET         = 0x0c,
  66         VSC_SATA_TF_LBAM_OFFSET         = 0x10,
  67         VSC_SATA_TF_LBAH_OFFSET         = 0x14,
  68         VSC_SATA_TF_DEVICE_OFFSET       = 0x18,
  69         VSC_SATA_TF_STATUS_OFFSET       = 0x1c,
  70         VSC_SATA_TF_COMMAND_OFFSET      = 0x1d,
  71         VSC_SATA_TF_ALTSTATUS_OFFSET    = 0x28,
  72         VSC_SATA_TF_CTL_OFFSET          = 0x29,
  73
  74         /* DMA base */
  75         VSC_SATA_UP_DESCRIPTOR_OFFSET   = 0x64,
  76         VSC_SATA_UP_DATA_BUFFER_OFFSET  = 0x6C,
  77         VSC_SATA_DMA_CMD_OFFSET         = 0x70,
  78
  79         /* SCRs base */
  80         VSC_SATA_SCR_STATUS_OFFSET      = 0x100,
  81         VSC_SATA_SCR_ERROR_OFFSET       = 0x104,
  82         VSC_SATA_SCR_CONTROL_OFFSET     = 0x108,
  83
  84         /* Port stride */
  85         VSC_SATA_PORT_OFFSET            = 0x200,
  86
  87         /* Error interrupt status bit offsets */
  88         VSC_SATA_INT_ERROR_CRC          = 0x40,
  89         VSC_SATA_INT_ERROR_T            = 0x20,
  90         VSC_SATA_INT_ERROR_P            = 0x10,
  91         VSC_SATA_INT_ERROR_R            = 0x8,
  92         VSC_SATA_INT_ERROR_E            = 0x4,
  93         VSC_SATA_INT_ERROR_M            = 0x2,
  94         VSC_SATA_INT_PHY_CHANGE         = 0x1,
  95         VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
  96                               VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
  97                               VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
  98                               VSC_SATA_INT_PHY_CHANGE),
  99 };
 100
 101 static int vsc_sata_scr_read(struct ata_link *link,
 102                              unsigned int sc_reg, u32 *val)
 103 {
 104         if (sc_reg > SCR_CONTROL)
 105                 return -EINVAL;
 106         *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
 107         return 0;
 108 }
 109
 110
 111 static int vsc_sata_scr_write(struct ata_link *link,
 112                               unsigned int sc_reg, u32 val)
 113 {
 114         if (sc_reg > SCR_CONTROL)
 115                 return -EINVAL;
 116         writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
 117         return 0;
 118 }
 119
 120
 121 static void vsc_freeze(struct ata_port *ap)
 122 {
 123         void __iomem *mask_addr;
 124
 125         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 126                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 127
 128         writeb(0, mask_addr);
 129 }
 130
 131
 132 static void vsc_thaw(struct ata_port *ap)
 133 {
 134         void __iomem *mask_addr;
 135
 136         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 137                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 138
 139         writeb(0xff, mask_addr);
 140 }
 141
 142
 143 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 144 {
 145         void __iomem *mask_addr;
 146         u8 mask;
 147
 148         mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 149                 VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 150         mask = readb(mask_addr);
 151         if (ctl & ATA_NIEN)
 152                 mask |= 0x80;
 153         else
 154                 mask &= 0x7F;
 155         writeb(mask, mask_addr);
 156 }
 157
 158
 159 static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 160 {
 161         struct ata_ioports *ioaddr = &ap->ioaddr;
 162         unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 163
 164         /*
 165          * The only thing the ctl register is used for is SRST.
 166          * That is not enabled or disabled via tf_load.
 167          * However, if ATA_NIEN is changed, then we need to change
 168          * the interrupt register.
 169          */
 170         if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
 171                 ap->last_ctl = tf->ctl;
 172                 vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
 173         }
 174         if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
 175                 writew(tf->feature | (((u16)tf->hob_feature) << 8),
 176                        ioaddr->feature_addr);
 177                 writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
 178                        ioaddr->nsect_addr);
 179                 writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
 180                        ioaddr->lbal_addr);
 181                 writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
 182                        ioaddr->lbam_addr);
 183                 writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
 184                        ioaddr->lbah_addr);
 185         } else if (is_addr) {
 186                 writew(tf->feature, ioaddr->feature_addr);
 187                 writew(tf->nsect, ioaddr->nsect_addr);
 188                 writew(tf->lbal, ioaddr->lbal_addr);
 189                 writew(tf->lbam, ioaddr->lbam_addr);
 190                 writew(tf->lbah, ioaddr->lbah_addr);
 191         }
 192
 193         if (tf->flags & ATA_TFLAG_DEVICE)
 194                 writeb(tf->device, ioaddr->device_addr);
 195
 196         ata_wait_idle(ap);
 197 }
 198
 199
 200 static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 201 {
 202         struct ata_ioports *ioaddr = &ap->ioaddr;
 203         u16 nsect, lbal, lbam, lbah, feature;
 204
 205         tf->command = ata_sff_check_status(ap);
 206         tf->device = readw(ioaddr->device_addr);
 207         feature = readw(ioaddr->error_addr);
 208         nsect = readw(ioaddr->nsect_addr);
 209         lbal = readw(ioaddr->lbal_addr);
 210         lbam = readw(ioaddr->lbam_addr);
 211         lbah = readw(ioaddr->lbah_addr);
 212
 213         tf->feature = feature;
 214         tf->nsect = nsect;
 215         tf->lbal = lbal;
 216         tf->lbam = lbam;
 217         tf->lbah = lbah;
 218
 219         if (tf->flags & ATA_TFLAG_LBA48) {
 220                 tf->hob_feature = feature >> 8;
 221                 tf->hob_nsect = nsect >> 8;
 222                 tf->hob_lbal = lbal >> 8;
 223                 tf->hob_lbam = lbam >> 8;
 224                 tf->hob_lbah = lbah >> 8;
 225         }
 226 }
 227
 228 static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
 229 {
 230         if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
 231                 ata_port_freeze(ap);
 232         else
 233                 ata_port_abort(ap);
 234 }
 235
 236 static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 237 {
 238         struct ata_queued_cmd *qc;
 239         int handled = 0;
 240
 241         if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
 242                 vsc_error_intr(port_status, ap);
 243                 return;
 244         }
 245
 246         qc = ata_qc_from_tag(ap, ap->link.active_tag);
 247         if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
 248                 handled = ata_bmdma_port_intr(ap, qc);
 249
 250         /* We received an interrupt during a polled command,
 251          * or some other spurious condition.  Interrupt reporting
 252          * with this hardware is fairly reliable so it is safe to
 253          * simply clear the interrupt
 254          */
 255         if (unlikely(!handled))
 256                 ap->ops->sff_check_status(ap);
 257 }
 258
 259 /*
 260  * vsc_sata_interrupt
 261  *
 262  * Read the interrupt register and process for the devices that have
 263  * them pending.
 264  */
 265 static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
 266 {
 267         struct ata_host *host = dev_instance;
 268         unsigned int i;
 269         unsigned int handled = 0;
 270         u32 status;
 271
 272         status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
 273
 274         if (unlikely(status == 0xffffffff || status == 0)) {
 275                 if (status)
 276                         dev_err(host->dev,
 277                                 ": IRQ status == 0xffffffff, PCI fault or device removal?\n");
 278                 goto out;
 279         }
 280
 281         spin_lock(&host->lock);
 282
 283         for (i = 0; i < host->n_ports; i++) {
 284                 u8 port_status = (status >> (8 * i)) & 0xff;
 285                 if (port_status) {
 286                         vsc_port_intr(port_status, host->ports[i]);
 287                         handled++;
 288                 }
 289         }
 290
 291         spin_unlock(&host->lock);
 292 out:
 293         return IRQ_RETVAL(handled);
 294 }
 295
 296
 297 static struct scsi_host_template vsc_sata_sht = {
 298         ATA_BMDMA_SHT(DRV_NAME),
 299 };
 300
 301
 302 static struct ata_port_operations vsc_sata_ops = {
 303         .inherits               = &ata_bmdma_port_ops,
 304         /* The IRQ handling is not quite standard SFF behaviour so we
 305            cannot use the default lost interrupt handler */
 306         .lost_interrupt         = ATA_OP_NULL,
 307         .sff_tf_load            = vsc_sata_tf_load,
 308         .sff_tf_read            = vsc_sata_tf_read,
 309         .freeze                 = vsc_freeze,
 310         .thaw                   = vsc_thaw,
 311         .scr_read               = vsc_sata_scr_read,
 312         .scr_write              = vsc_sata_scr_write,
 313 };
 314
 315 static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
 316                                           void __iomem *base)
 317 {
 318         port->cmd_addr          = base + VSC_SATA_TF_CMD_OFFSET;
 319         port->data_addr         = base + VSC_SATA_TF_DATA_OFFSET;
 320         port->error_addr        = base + VSC_SATA_TF_ERROR_OFFSET;
 321         port->feature_addr      = base + VSC_SATA_TF_FEATURE_OFFSET;
 322         port->nsect_addr        = base + VSC_SATA_TF_NSECT_OFFSET;
 323         port->lbal_addr         = base + VSC_SATA_TF_LBAL_OFFSET;
 324         port->lbam_addr         = base + VSC_SATA_TF_LBAM_OFFSET;
 325         port->lbah_addr         = base + VSC_SATA_TF_LBAH_OFFSET;
 326         port->device_addr       = base + VSC_SATA_TF_DEVICE_OFFSET;
 327         port->status_addr       = base + VSC_SATA_TF_STATUS_OFFSET;
 328         port->command_addr      = base + VSC_SATA_TF_COMMAND_OFFSET;
 329         port->altstatus_addr    = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
 330         port->ctl_addr          = base + VSC_SATA_TF_CTL_OFFSET;
 331         port->bmdma_addr        = base + VSC_SATA_DMA_CMD_OFFSET;
 332         port->scr_addr          = base + VSC_SATA_SCR_STATUS_OFFSET;
 333         writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
 334         writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
 335 }
 336
 337
 338 static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
 339                                        const struct pci_device_id *ent)
 340 {
 341         static const struct ata_port_info pi = {
 342                 .flags          = ATA_FLAG_SATA,
 343                 .pio_mask       = ATA_PIO4,
 344                 .mwdma_mask     = ATA_MWDMA2,
 345                 .udma_mask      = ATA_UDMA6,
 346                 .port_ops       = &vsc_sata_ops,
 347         };
 348         const struct ata_port_info *ppi[] = { &pi, NULL };
 349         struct ata_host *host;
 350         void __iomem *mmio_base;
 351         int i, rc;
 352         u8 cls;
 353
 354         ata_print_version_once(&pdev->dev, DRV_VERSION);
 355
 356         /* allocate host */
 357         host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
 358         if (!host)
 359                 return -ENOMEM;
 360
 361         rc = pcim_enable_device(pdev);
 362         if (rc)
 363                 return rc;
 364
 365         /* check if we have needed resource mapped */
 366         if (pci_resource_len(pdev, 0) == 0)
 367                 return -ENODEV;
 368
 369         /* map IO regions and initialize host accordingly */
 370         rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
 371         if (rc == -EBUSY)
 372                 pcim_pin_device(pdev);
 373         if (rc)
 374                 return rc;
 375         host->iomap = pcim_iomap_table(pdev);
 376
 377         mmio_base = host->iomap[VSC_MMIO_BAR];
 378
 379         for (i = 0; i < host->n_ports; i++) {
 380                 struct ata_port *ap = host->ports[i];
 381                 unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
 382
 383                 vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
 384
 385                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
 386                 ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
 387         }
 388
 389         /*
 390          * Use 32 bit DMA mask, because 64 bit address support is poor.
 391          */
 392         rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 393         if (rc)
 394                 return rc;
 395         rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 396         if (rc)
 397                 return rc;
 398
 399         /*
 400          * Due to a bug in the chip, the default cache line size can't be
 401          * used (unless the default is non-zero).
 402          */
 403         pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
 404         if (cls == 0x00)
 405                 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
 406
 407         if (pci_enable_msi(pdev) == 0)
 408                 pci_intx(pdev, 0);
 409
 410         /*
 411          * Config offset 0x98 is "Extended Control and Status Register 0"
 412          * Default value is (1 << 28).  All bits except bit 28 are reserved in
 413          * DPA mode.  If bit 28 is set, LED 0 reflects all ports' activity.
 414          * If bit 28 is clear, each port has its own LED.
 415          */
 416         pci_write_config_dword(pdev, 0x98, 0);
 417
 418         pci_set_master(pdev);
 419         return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
 420                                  IRQF_SHARED, &vsc_sata_sht);
 421 }
 422
 423 static const struct pci_device_id vsc_sata_pci_tbl[] = {
 424         { PCI_VENDOR_ID_VITESSE, 0x7174,
 425           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 426         { PCI_VENDOR_ID_INTEL, 0x3200,
 427           PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
 428
 429         { }     /* terminate list */
 430 };
 431
 432 static struct pci_driver vsc_sata_pci_driver = {
 433         .name                   = DRV_NAME,
 434         .id_table               = vsc_sata_pci_tbl,
 435         .probe                  = vsc_sata_init_one,
 436         .remove                 = ata_pci_remove_one,
 437 };
 438
 439 static int __init vsc_sata_init(void)
 440 {
 441         return pci_register_driver(&vsc_sata_pci_driver);
 442 }
 443
 444 static void __exit vsc_sata_exit(void)
 445 {
 446         pci_unregister_driver(&vsc_sata_pci_driver);
 447 }
 448
 449 MODULE_AUTHOR("Jeremy Higdon");
 450 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
 451 MODULE_LICENSE("GPL");
 452 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
 453 MODULE_VERSION(DRV_VERSION);
 454
 455 module_init(vsc_sata_init);
 456 module_exit(vsc_sata_exit);