include/scsi/fc/fc_fc2.h

   1 /*
   2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms and conditions of the GNU General Public License,
   6  * version 2, as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope it will be useful, but WITHOUT
   9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11  * more details.
  12  *
  13  * You should have received a copy of the GNU General Public License along with
  14  * this program; if not, write to the Free Software Foundation, Inc.,
  15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16  *
  17  * Maintained at www.Open-FCoE.org
  18  */
  19
  20 #ifndef _FC_FC2_H_
  21 #define _FC_FC2_H_
  22
  23 /*
  24  * Fibre Channel Exchanges and Sequences.
  25  */
  26 #ifndef PACKED
  27 #define PACKED  __attribute__ ((__packed__))
  28 #endif /* PACKED */
  29
  30
  31 /*
  32  * Sequence Status Block.
  33  * This format is set by the FC-FS standard and is sent over the wire.
  34  * Note that the fields aren't all naturally aligned.
  35  */
  36 struct fc_ssb {
  37         __u8    ssb_seq_id;             /* sequence ID */
  38         __u8    _ssb_resvd;
  39         __be16  ssb_low_seq_cnt;        /* lowest SEQ_CNT */
  40
  41         __be16  ssb_high_seq_cnt;       /* highest SEQ_CNT */
  42         __be16  ssb_s_stat;             /* sequence status flags */
  43
  44         __be16  ssb_err_seq_cnt;        /* error SEQ_CNT */
  45         __u8    ssb_fh_cs_ctl;          /* frame header CS_CTL */
  46         __be16  ssb_fh_ox_id;           /* frame header OX_ID */
  47         __be16  ssb_rx_id;              /* responder's exchange ID */
  48         __u8    _ssb_resvd2[2];
  49 } PACKED;
  50
  51 /*
  52  * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
  53  * we define the size here so that code can ASSERT that the size comes out
  54  * correct.
  55  */
  56 #define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
  57
  58 /*
  59  * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
  60  */
  61 #define SSB_ST_RESP         (1 << 15)   /* sequence responder */
  62 #define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
  63 #define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
  64
  65 #define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
  66 #define SSB_ST_REQ_CONT     (0 << 10)
  67 #define SSB_ST_REQ_ABORT    (1 << 10)
  68 #define SSB_ST_REQ_STOP     (2 << 10)
  69 #define SSB_ST_REQ_RETRANS  (3 << 10)
  70
  71 #define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
  72 #define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
  73 #define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
  74 #define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
  75
  76 #define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
  77 #define SSB_ST_CLASS_MASK   3           /* class of service mask */
  78 #define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
  79
  80 /*
  81  * Exchange Status Block.
  82  * This format is set by the FC-FS standard and is sent over the wire.
  83  * Note that the fields aren't all naturally aligned.
  84  */
  85 struct fc_esb {
  86         __u8    esb_cs_ctl;             /* CS_CTL for frame header */
  87         __be16  esb_ox_id;              /* originator exchange ID */
  88         __be16  esb_rx_id;              /* responder exchange ID */
  89         __be32  esb_orig_fid;           /* fabric ID of originator */
  90         __be32  esb_resp_fid;           /* fabric ID of responder */
  91         __be32  esb_e_stat;             /* status */
  92         __u8    _esb_resvd[4];
  93         __u8    esb_service_params[112]; /* TBD */
  94         __u8    esb_seq_status[8];      /* sequence statuses, 8 bytes each */
  95 } __attribute__((packed));
  96
  97 /*
  98  * Define expected size for ASSERTs.
  99  * See comments on FC_SSB_SIZE.
 100  */
 101 #define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
 102
 103 /*
 104  * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
 105  */
 106 #define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
 107 #define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiaive */
 108 #define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
 109 #define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
 110 #define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
 111
 112 #define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
 113 #define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
 114 #define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
 115 #define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
 116 #define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
 117 #define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
 118
 119 #define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
 120 #define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
 121 #define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
 122
 123 #endif /* _FC_FC2_H_ */