sfc: Don't use enums as a bitmask.
[zen-stable.git] / drivers / net / spider_net.c
blob949f124e1278cdf5d0f1ee257c8df598d311d8b0
1 /*
2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
13 * any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
32 #include <linux/in.h>
33 #include <linux/init.h>
34 #include <linux/gfp.h>
35 #include <linux/ioport.h>
36 #include <linux/ip.h>
37 #include <linux/kernel.h>
38 #include <linux/mii.h>
39 #include <linux/module.h>
40 #include <linux/netdevice.h>
41 #include <linux/device.h>
42 #include <linux/pci.h>
43 #include <linux/skbuff.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION);
60 MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
62 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
63 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
65 module_param(rx_descriptors, int, 0444);
66 module_param(tx_descriptors, int, 0444);
68 MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
69 "in rx chains");
70 MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
71 "in tx chain");
73 char spider_net_driver_name[] = "spidernet";
75 static DEFINE_PCI_DEVICE_TABLE(spider_net_pci_tbl) = {
76 { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
77 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
78 { 0, }
81 MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
83 /**
84 * spider_net_read_reg - reads an SMMIO register of a card
85 * @card: device structure
86 * @reg: register to read from
88 * returns the content of the specified SMMIO register.
90 static inline u32
91 spider_net_read_reg(struct spider_net_card *card, u32 reg)
93 /* We use the powerpc specific variants instead of readl_be() because
94 * we know spidernet is not a real PCI device and we can thus avoid the
95 * performance hit caused by the PCI workarounds.
97 return in_be32(card->regs + reg);
101 * spider_net_write_reg - writes to an SMMIO register of a card
102 * @card: device structure
103 * @reg: register to write to
104 * @value: value to write into the specified SMMIO register
106 static inline void
107 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
109 /* We use the powerpc specific variants instead of writel_be() because
110 * we know spidernet is not a real PCI device and we can thus avoid the
111 * performance hit caused by the PCI workarounds.
113 out_be32(card->regs + reg, value);
116 /** spider_net_write_phy - write to phy register
117 * @netdev: adapter to be written to
118 * @mii_id: id of MII
119 * @reg: PHY register
120 * @val: value to be written to phy register
122 * spider_net_write_phy_register writes to an arbitrary PHY
123 * register via the spider GPCWOPCMD register. We assume the queue does
124 * not run full (not more than 15 commands outstanding).
126 static void
127 spider_net_write_phy(struct net_device *netdev, int mii_id,
128 int reg, int val)
130 struct spider_net_card *card = netdev_priv(netdev);
131 u32 writevalue;
133 writevalue = ((u32)mii_id << 21) |
134 ((u32)reg << 16) | ((u32)val);
136 spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
139 /** spider_net_read_phy - read from phy register
140 * @netdev: network device to be read from
141 * @mii_id: id of MII
142 * @reg: PHY register
144 * Returns value read from PHY register
146 * spider_net_write_phy reads from an arbitrary PHY
147 * register via the spider GPCROPCMD register
149 static int
150 spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
152 struct spider_net_card *card = netdev_priv(netdev);
153 u32 readvalue;
155 readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
156 spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
158 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
159 * interrupt, as we poll for the completion of the read operation
160 * in spider_net_read_phy. Should take about 50 us */
161 do {
162 readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
163 } while (readvalue & SPIDER_NET_GPREXEC);
165 readvalue &= SPIDER_NET_GPRDAT_MASK;
167 return readvalue;
171 * spider_net_setup_aneg - initial auto-negotiation setup
172 * @card: device structure
174 static void
175 spider_net_setup_aneg(struct spider_net_card *card)
177 struct mii_phy *phy = &card->phy;
178 u32 advertise = 0;
179 u16 bmsr, estat;
181 bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
182 estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
184 if (bmsr & BMSR_10HALF)
185 advertise |= ADVERTISED_10baseT_Half;
186 if (bmsr & BMSR_10FULL)
187 advertise |= ADVERTISED_10baseT_Full;
188 if (bmsr & BMSR_100HALF)
189 advertise |= ADVERTISED_100baseT_Half;
190 if (bmsr & BMSR_100FULL)
191 advertise |= ADVERTISED_100baseT_Full;
193 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
194 advertise |= SUPPORTED_1000baseT_Full;
195 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
196 advertise |= SUPPORTED_1000baseT_Half;
198 mii_phy_probe(phy, phy->mii_id);
199 phy->def->ops->setup_aneg(phy, advertise);
204 * spider_net_rx_irq_off - switch off rx irq on this spider card
205 * @card: device structure
207 * switches off rx irq by masking them out in the GHIINTnMSK register
209 static void
210 spider_net_rx_irq_off(struct spider_net_card *card)
212 u32 regvalue;
214 regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
215 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
219 * spider_net_rx_irq_on - switch on rx irq on this spider card
220 * @card: device structure
222 * switches on rx irq by enabling them in the GHIINTnMSK register
224 static void
225 spider_net_rx_irq_on(struct spider_net_card *card)
227 u32 regvalue;
229 regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
230 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
234 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
235 * @card: card structure
237 * spider_net_set_promisc sets the unicast destination address filter and
238 * thus either allows for non-promisc mode or promisc mode
240 static void
241 spider_net_set_promisc(struct spider_net_card *card)
243 u32 macu, macl;
244 struct net_device *netdev = card->netdev;
246 if (netdev->flags & IFF_PROMISC) {
247 /* clear destination entry 0 */
248 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
249 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
250 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
251 SPIDER_NET_PROMISC_VALUE);
252 } else {
253 macu = netdev->dev_addr[0];
254 macu <<= 8;
255 macu |= netdev->dev_addr[1];
256 memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
258 macu |= SPIDER_NET_UA_DESCR_VALUE;
259 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
260 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
261 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
262 SPIDER_NET_NONPROMISC_VALUE);
267 * spider_net_get_mac_address - read mac address from spider card
268 * @card: device structure
270 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
272 static int
273 spider_net_get_mac_address(struct net_device *netdev)
275 struct spider_net_card *card = netdev_priv(netdev);
276 u32 macl, macu;
278 macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
279 macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
281 netdev->dev_addr[0] = (macu >> 24) & 0xff;
282 netdev->dev_addr[1] = (macu >> 16) & 0xff;
283 netdev->dev_addr[2] = (macu >> 8) & 0xff;
284 netdev->dev_addr[3] = macu & 0xff;
285 netdev->dev_addr[4] = (macl >> 8) & 0xff;
286 netdev->dev_addr[5] = macl & 0xff;
288 if (!is_valid_ether_addr(&netdev->dev_addr[0]))
289 return -EINVAL;
291 return 0;
295 * spider_net_get_descr_status -- returns the status of a descriptor
296 * @descr: descriptor to look at
298 * returns the status as in the dmac_cmd_status field of the descriptor
300 static inline int
301 spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
303 return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
307 * spider_net_free_chain - free descriptor chain
308 * @card: card structure
309 * @chain: address of chain
312 static void
313 spider_net_free_chain(struct spider_net_card *card,
314 struct spider_net_descr_chain *chain)
316 struct spider_net_descr *descr;
318 descr = chain->ring;
319 do {
320 descr->bus_addr = 0;
321 descr->hwdescr->next_descr_addr = 0;
322 descr = descr->next;
323 } while (descr != chain->ring);
325 dma_free_coherent(&card->pdev->dev, chain->num_desc,
326 chain->hwring, chain->dma_addr);
330 * spider_net_init_chain - alloc and link descriptor chain
331 * @card: card structure
332 * @chain: address of chain
334 * We manage a circular list that mirrors the hardware structure,
335 * except that the hardware uses bus addresses.
337 * Returns 0 on success, <0 on failure
339 static int
340 spider_net_init_chain(struct spider_net_card *card,
341 struct spider_net_descr_chain *chain)
343 int i;
344 struct spider_net_descr *descr;
345 struct spider_net_hw_descr *hwdescr;
346 dma_addr_t buf;
347 size_t alloc_size;
349 alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
351 chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
352 &chain->dma_addr, GFP_KERNEL);
354 if (!chain->hwring)
355 return -ENOMEM;
357 memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
359 /* Set up the hardware pointers in each descriptor */
360 descr = chain->ring;
361 hwdescr = chain->hwring;
362 buf = chain->dma_addr;
363 for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
364 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
365 hwdescr->next_descr_addr = 0;
367 descr->hwdescr = hwdescr;
368 descr->bus_addr = buf;
369 descr->next = descr + 1;
370 descr->prev = descr - 1;
372 buf += sizeof(struct spider_net_hw_descr);
374 /* do actual circular list */
375 (descr-1)->next = chain->ring;
376 chain->ring->prev = descr-1;
378 spin_lock_init(&chain->lock);
379 chain->head = chain->ring;
380 chain->tail = chain->ring;
381 return 0;
385 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
386 * @card: card structure
388 * returns 0 on success, <0 on failure
390 static void
391 spider_net_free_rx_chain_contents(struct spider_net_card *card)
393 struct spider_net_descr *descr;
395 descr = card->rx_chain.head;
396 do {
397 if (descr->skb) {
398 pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
399 SPIDER_NET_MAX_FRAME,
400 PCI_DMA_BIDIRECTIONAL);
401 dev_kfree_skb(descr->skb);
402 descr->skb = NULL;
404 descr = descr->next;
405 } while (descr != card->rx_chain.head);
409 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
410 * @card: card structure
411 * @descr: descriptor to re-init
413 * Return 0 on success, <0 on failure.
415 * Allocates a new rx skb, iommu-maps it and attaches it to the
416 * descriptor. Mark the descriptor as activated, ready-to-use.
418 static int
419 spider_net_prepare_rx_descr(struct spider_net_card *card,
420 struct spider_net_descr *descr)
422 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
423 dma_addr_t buf;
424 int offset;
425 int bufsize;
427 /* we need to round up the buffer size to a multiple of 128 */
428 bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
429 (~(SPIDER_NET_RXBUF_ALIGN - 1));
431 /* and we need to have it 128 byte aligned, therefore we allocate a
432 * bit more */
433 /* allocate an skb */
434 descr->skb = netdev_alloc_skb(card->netdev,
435 bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
436 if (!descr->skb) {
437 if (netif_msg_rx_err(card) && net_ratelimit())
438 dev_err(&card->netdev->dev,
439 "Not enough memory to allocate rx buffer\n");
440 card->spider_stats.alloc_rx_skb_error++;
441 return -ENOMEM;
443 hwdescr->buf_size = bufsize;
444 hwdescr->result_size = 0;
445 hwdescr->valid_size = 0;
446 hwdescr->data_status = 0;
447 hwdescr->data_error = 0;
449 offset = ((unsigned long)descr->skb->data) &
450 (SPIDER_NET_RXBUF_ALIGN - 1);
451 if (offset)
452 skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
453 /* iommu-map the skb */
454 buf = pci_map_single(card->pdev, descr->skb->data,
455 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
456 if (pci_dma_mapping_error(card->pdev, buf)) {
457 dev_kfree_skb_any(descr->skb);
458 descr->skb = NULL;
459 if (netif_msg_rx_err(card) && net_ratelimit())
460 dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
461 card->spider_stats.rx_iommu_map_error++;
462 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
463 } else {
464 hwdescr->buf_addr = buf;
465 wmb();
466 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
467 SPIDER_NET_DMAC_NOINTR_COMPLETE;
470 return 0;
474 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
475 * @card: card structure
477 * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the
478 * chip by writing to the appropriate register. DMA is enabled in
479 * spider_net_enable_rxdmac.
481 static inline void
482 spider_net_enable_rxchtails(struct spider_net_card *card)
484 /* assume chain is aligned correctly */
485 spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
486 card->rx_chain.tail->bus_addr);
490 * spider_net_enable_rxdmac - enables a receive DMA controller
491 * @card: card structure
493 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
494 * in the GDADMACCNTR register
496 static inline void
497 spider_net_enable_rxdmac(struct spider_net_card *card)
499 wmb();
500 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
501 SPIDER_NET_DMA_RX_VALUE);
505 * spider_net_disable_rxdmac - disables the receive DMA controller
506 * @card: card structure
508 * spider_net_disable_rxdmac terminates processing on the DMA controller
509 * by turing off the DMA controller, with the force-end flag set.
511 static inline void
512 spider_net_disable_rxdmac(struct spider_net_card *card)
514 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
515 SPIDER_NET_DMA_RX_FEND_VALUE);
519 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
520 * @card: card structure
522 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
524 static void
525 spider_net_refill_rx_chain(struct spider_net_card *card)
527 struct spider_net_descr_chain *chain = &card->rx_chain;
528 unsigned long flags;
530 /* one context doing the refill (and a second context seeing that
531 * and omitting it) is ok. If called by NAPI, we'll be called again
532 * as spider_net_decode_one_descr is called several times. If some
533 * interrupt calls us, the NAPI is about to clean up anyway. */
534 if (!spin_trylock_irqsave(&chain->lock, flags))
535 return;
537 while (spider_net_get_descr_status(chain->head->hwdescr) ==
538 SPIDER_NET_DESCR_NOT_IN_USE) {
539 if (spider_net_prepare_rx_descr(card, chain->head))
540 break;
541 chain->head = chain->head->next;
544 spin_unlock_irqrestore(&chain->lock, flags);
548 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
549 * @card: card structure
551 * Returns 0 on success, <0 on failure.
553 static int
554 spider_net_alloc_rx_skbs(struct spider_net_card *card)
556 struct spider_net_descr_chain *chain = &card->rx_chain;
557 struct spider_net_descr *start = chain->tail;
558 struct spider_net_descr *descr = start;
560 /* Link up the hardware chain pointers */
561 do {
562 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
563 descr = descr->next;
564 } while (descr != start);
566 /* Put at least one buffer into the chain. if this fails,
567 * we've got a problem. If not, spider_net_refill_rx_chain
568 * will do the rest at the end of this function. */
569 if (spider_net_prepare_rx_descr(card, chain->head))
570 goto error;
571 else
572 chain->head = chain->head->next;
574 /* This will allocate the rest of the rx buffers;
575 * if not, it's business as usual later on. */
576 spider_net_refill_rx_chain(card);
577 spider_net_enable_rxdmac(card);
578 return 0;
580 error:
581 spider_net_free_rx_chain_contents(card);
582 return -ENOMEM;
586 * spider_net_get_multicast_hash - generates hash for multicast filter table
587 * @addr: multicast address
589 * returns the hash value.
591 * spider_net_get_multicast_hash calculates a hash value for a given multicast
592 * address, that is used to set the multicast filter tables
594 static u8
595 spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
597 u32 crc;
598 u8 hash;
599 char addr_for_crc[ETH_ALEN] = { 0, };
600 int i, bit;
602 for (i = 0; i < ETH_ALEN * 8; i++) {
603 bit = (addr[i / 8] >> (i % 8)) & 1;
604 addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
607 crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
609 hash = (crc >> 27);
610 hash <<= 3;
611 hash |= crc & 7;
612 hash &= 0xff;
614 return hash;
618 * spider_net_set_multi - sets multicast addresses and promisc flags
619 * @netdev: interface device structure
621 * spider_net_set_multi configures multicast addresses as needed for the
622 * netdev interface. It also sets up multicast, allmulti and promisc
623 * flags appropriately
625 static void
626 spider_net_set_multi(struct net_device *netdev)
628 struct netdev_hw_addr *ha;
629 u8 hash;
630 int i;
631 u32 reg;
632 struct spider_net_card *card = netdev_priv(netdev);
633 unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
634 {0, };
636 spider_net_set_promisc(card);
638 if (netdev->flags & IFF_ALLMULTI) {
639 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
640 set_bit(i, bitmask);
642 goto write_hash;
645 /* well, we know, what the broadcast hash value is: it's xfd
646 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
647 set_bit(0xfd, bitmask);
649 netdev_for_each_mc_addr(ha, netdev) {
650 hash = spider_net_get_multicast_hash(netdev, ha->addr);
651 set_bit(hash, bitmask);
654 write_hash:
655 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
656 reg = 0;
657 if (test_bit(i * 4, bitmask))
658 reg += 0x08;
659 reg <<= 8;
660 if (test_bit(i * 4 + 1, bitmask))
661 reg += 0x08;
662 reg <<= 8;
663 if (test_bit(i * 4 + 2, bitmask))
664 reg += 0x08;
665 reg <<= 8;
666 if (test_bit(i * 4 + 3, bitmask))
667 reg += 0x08;
669 spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
674 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
675 * @card: card structure
676 * @skb: packet to use
678 * returns 0 on success, <0 on failure.
680 * fills out the descriptor structure with skb data and len. Copies data,
681 * if needed (32bit DMA!)
683 static int
684 spider_net_prepare_tx_descr(struct spider_net_card *card,
685 struct sk_buff *skb)
687 struct spider_net_descr_chain *chain = &card->tx_chain;
688 struct spider_net_descr *descr;
689 struct spider_net_hw_descr *hwdescr;
690 dma_addr_t buf;
691 unsigned long flags;
693 buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
694 if (pci_dma_mapping_error(card->pdev, buf)) {
695 if (netif_msg_tx_err(card) && net_ratelimit())
696 dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
697 "Dropping packet\n", skb->data, skb->len);
698 card->spider_stats.tx_iommu_map_error++;
699 return -ENOMEM;
702 spin_lock_irqsave(&chain->lock, flags);
703 descr = card->tx_chain.head;
704 if (descr->next == chain->tail->prev) {
705 spin_unlock_irqrestore(&chain->lock, flags);
706 pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
707 return -ENOMEM;
709 hwdescr = descr->hwdescr;
710 chain->head = descr->next;
712 descr->skb = skb;
713 hwdescr->buf_addr = buf;
714 hwdescr->buf_size = skb->len;
715 hwdescr->next_descr_addr = 0;
716 hwdescr->data_status = 0;
718 hwdescr->dmac_cmd_status =
719 SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
720 spin_unlock_irqrestore(&chain->lock, flags);
722 if (skb->ip_summed == CHECKSUM_PARTIAL)
723 switch (ip_hdr(skb)->protocol) {
724 case IPPROTO_TCP:
725 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
726 break;
727 case IPPROTO_UDP:
728 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
729 break;
732 /* Chain the bus address, so that the DMA engine finds this descr. */
733 wmb();
734 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
736 card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
737 return 0;
740 static int
741 spider_net_set_low_watermark(struct spider_net_card *card)
743 struct spider_net_descr *descr = card->tx_chain.tail;
744 struct spider_net_hw_descr *hwdescr;
745 unsigned long flags;
746 int status;
747 int cnt=0;
748 int i;
750 /* Measure the length of the queue. Measurement does not
751 * need to be precise -- does not need a lock. */
752 while (descr != card->tx_chain.head) {
753 status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
754 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
755 break;
756 descr = descr->next;
757 cnt++;
760 /* If TX queue is short, don't even bother with interrupts */
761 if (cnt < card->tx_chain.num_desc/4)
762 return cnt;
764 /* Set low-watermark 3/4th's of the way into the queue. */
765 descr = card->tx_chain.tail;
766 cnt = (cnt*3)/4;
767 for (i=0;i<cnt; i++)
768 descr = descr->next;
770 /* Set the new watermark, clear the old watermark */
771 spin_lock_irqsave(&card->tx_chain.lock, flags);
772 descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
773 if (card->low_watermark && card->low_watermark != descr) {
774 hwdescr = card->low_watermark->hwdescr;
775 hwdescr->dmac_cmd_status =
776 hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
778 card->low_watermark = descr;
779 spin_unlock_irqrestore(&card->tx_chain.lock, flags);
780 return cnt;
784 * spider_net_release_tx_chain - processes sent tx descriptors
785 * @card: adapter structure
786 * @brutal: if set, don't care about whether descriptor seems to be in use
788 * returns 0 if the tx ring is empty, otherwise 1.
790 * spider_net_release_tx_chain releases the tx descriptors that spider has
791 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
792 * If some other context is calling this function, we return 1 so that we're
793 * scheduled again (if we were scheduled) and will not lose initiative.
795 static int
796 spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
798 struct net_device *dev = card->netdev;
799 struct spider_net_descr_chain *chain = &card->tx_chain;
800 struct spider_net_descr *descr;
801 struct spider_net_hw_descr *hwdescr;
802 struct sk_buff *skb;
803 u32 buf_addr;
804 unsigned long flags;
805 int status;
807 while (1) {
808 spin_lock_irqsave(&chain->lock, flags);
809 if (chain->tail == chain->head) {
810 spin_unlock_irqrestore(&chain->lock, flags);
811 return 0;
813 descr = chain->tail;
814 hwdescr = descr->hwdescr;
816 status = spider_net_get_descr_status(hwdescr);
817 switch (status) {
818 case SPIDER_NET_DESCR_COMPLETE:
819 dev->stats.tx_packets++;
820 dev->stats.tx_bytes += descr->skb->len;
821 break;
823 case SPIDER_NET_DESCR_CARDOWNED:
824 if (!brutal) {
825 spin_unlock_irqrestore(&chain->lock, flags);
826 return 1;
829 /* fallthrough, if we release the descriptors
830 * brutally (then we don't care about
831 * SPIDER_NET_DESCR_CARDOWNED) */
833 case SPIDER_NET_DESCR_RESPONSE_ERROR:
834 case SPIDER_NET_DESCR_PROTECTION_ERROR:
835 case SPIDER_NET_DESCR_FORCE_END:
836 if (netif_msg_tx_err(card))
837 dev_err(&card->netdev->dev, "forcing end of tx descriptor "
838 "with status x%02x\n", status);
839 dev->stats.tx_errors++;
840 break;
842 default:
843 dev->stats.tx_dropped++;
844 if (!brutal) {
845 spin_unlock_irqrestore(&chain->lock, flags);
846 return 1;
850 chain->tail = descr->next;
851 hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
852 skb = descr->skb;
853 descr->skb = NULL;
854 buf_addr = hwdescr->buf_addr;
855 spin_unlock_irqrestore(&chain->lock, flags);
857 /* unmap the skb */
858 if (skb) {
859 pci_unmap_single(card->pdev, buf_addr, skb->len,
860 PCI_DMA_TODEVICE);
861 dev_kfree_skb(skb);
864 return 0;
868 * spider_net_kick_tx_dma - enables TX DMA processing
869 * @card: card structure
871 * This routine will start the transmit DMA running if
872 * it is not already running. This routine ned only be
873 * called when queueing a new packet to an empty tx queue.
874 * Writes the current tx chain head as start address
875 * of the tx descriptor chain and enables the transmission
876 * DMA engine.
878 static inline void
879 spider_net_kick_tx_dma(struct spider_net_card *card)
881 struct spider_net_descr *descr;
883 if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
884 SPIDER_NET_TX_DMA_EN)
885 goto out;
887 descr = card->tx_chain.tail;
888 for (;;) {
889 if (spider_net_get_descr_status(descr->hwdescr) ==
890 SPIDER_NET_DESCR_CARDOWNED) {
891 spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
892 descr->bus_addr);
893 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
894 SPIDER_NET_DMA_TX_VALUE);
895 break;
897 if (descr == card->tx_chain.head)
898 break;
899 descr = descr->next;
902 out:
903 mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
907 * spider_net_xmit - transmits a frame over the device
908 * @skb: packet to send out
909 * @netdev: interface device structure
911 * returns 0 on success, !0 on failure
913 static int
914 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
916 int cnt;
917 struct spider_net_card *card = netdev_priv(netdev);
919 spider_net_release_tx_chain(card, 0);
921 if (spider_net_prepare_tx_descr(card, skb) != 0) {
922 netdev->stats.tx_dropped++;
923 netif_stop_queue(netdev);
924 return NETDEV_TX_BUSY;
927 cnt = spider_net_set_low_watermark(card);
928 if (cnt < 5)
929 spider_net_kick_tx_dma(card);
930 return NETDEV_TX_OK;
934 * spider_net_cleanup_tx_ring - cleans up the TX ring
935 * @card: card structure
937 * spider_net_cleanup_tx_ring is called by either the tx_timer
938 * or from the NAPI polling routine.
939 * This routine releases resources associted with transmitted
940 * packets, including updating the queue tail pointer.
942 static void
943 spider_net_cleanup_tx_ring(struct spider_net_card *card)
945 if ((spider_net_release_tx_chain(card, 0) != 0) &&
946 (card->netdev->flags & IFF_UP)) {
947 spider_net_kick_tx_dma(card);
948 netif_wake_queue(card->netdev);
953 * spider_net_do_ioctl - called for device ioctls
954 * @netdev: interface device structure
955 * @ifr: request parameter structure for ioctl
956 * @cmd: command code for ioctl
958 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
959 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
961 static int
962 spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
964 switch (cmd) {
965 default:
966 return -EOPNOTSUPP;
971 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
972 * @descr: descriptor to process
973 * @card: card structure
975 * Fills out skb structure and passes the data to the stack.
976 * The descriptor state is not changed.
978 static void
979 spider_net_pass_skb_up(struct spider_net_descr *descr,
980 struct spider_net_card *card)
982 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
983 struct sk_buff *skb = descr->skb;
984 struct net_device *netdev = card->netdev;
985 u32 data_status = hwdescr->data_status;
986 u32 data_error = hwdescr->data_error;
988 skb_put(skb, hwdescr->valid_size);
990 /* the card seems to add 2 bytes of junk in front
991 * of the ethernet frame */
992 #define SPIDER_MISALIGN 2
993 skb_pull(skb, SPIDER_MISALIGN);
994 skb->protocol = eth_type_trans(skb, netdev);
996 /* checksum offload */
997 skb_checksum_none_assert(skb);
998 if (netdev->features & NETIF_F_RXCSUM) {
999 if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
1000 SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
1001 !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
1002 skb->ip_summed = CHECKSUM_UNNECESSARY;
1005 if (data_status & SPIDER_NET_VLAN_PACKET) {
1006 /* further enhancements: HW-accel VLAN
1007 * vlan_hwaccel_receive_skb
1011 /* update netdevice statistics */
1012 netdev->stats.rx_packets++;
1013 netdev->stats.rx_bytes += skb->len;
1015 /* pass skb up to stack */
1016 netif_receive_skb(skb);
1019 static void show_rx_chain(struct spider_net_card *card)
1021 struct spider_net_descr_chain *chain = &card->rx_chain;
1022 struct spider_net_descr *start= chain->tail;
1023 struct spider_net_descr *descr= start;
1024 struct spider_net_hw_descr *hwd = start->hwdescr;
1025 struct device *dev = &card->netdev->dev;
1026 u32 curr_desc, next_desc;
1027 int status;
1029 int tot = 0;
1030 int cnt = 0;
1031 int off = start - chain->ring;
1032 int cstat = hwd->dmac_cmd_status;
1034 dev_info(dev, "Total number of descrs=%d\n",
1035 chain->num_desc);
1036 dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
1037 off, cstat);
1039 curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
1040 next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
1042 status = cstat;
1045 hwd = descr->hwdescr;
1046 off = descr - chain->ring;
1047 status = hwd->dmac_cmd_status;
1049 if (descr == chain->head)
1050 dev_info(dev, "Chain head is at %d, head status=0x%x\n",
1051 off, status);
1053 if (curr_desc == descr->bus_addr)
1054 dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1055 off, status);
1057 if (next_desc == descr->bus_addr)
1058 dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1059 off, status);
1061 if (hwd->next_descr_addr == 0)
1062 dev_info(dev, "chain is cut at %d\n", off);
1064 if (cstat != status) {
1065 int from = (chain->num_desc + off - cnt) % chain->num_desc;
1066 int to = (chain->num_desc + off - 1) % chain->num_desc;
1067 dev_info(dev, "Have %d (from %d to %d) descrs "
1068 "with stat=0x%08x\n", cnt, from, to, cstat);
1069 cstat = status;
1070 cnt = 0;
1073 cnt ++;
1074 tot ++;
1075 descr = descr->next;
1076 } while (descr != start);
1078 dev_info(dev, "Last %d descrs with stat=0x%08x "
1079 "for a total of %d descrs\n", cnt, cstat, tot);
1081 #ifdef DEBUG
1082 /* Now dump the whole ring */
1083 descr = start;
1086 struct spider_net_hw_descr *hwd = descr->hwdescr;
1087 status = spider_net_get_descr_status(hwd);
1088 cnt = descr - chain->ring;
1089 dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
1090 cnt, status, descr->skb);
1091 dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
1092 descr->bus_addr, hwd->buf_addr, hwd->buf_size);
1093 dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
1094 hwd->next_descr_addr, hwd->result_size,
1095 hwd->valid_size);
1096 dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
1097 hwd->dmac_cmd_status, hwd->data_status,
1098 hwd->data_error);
1099 dev_info(dev, "\n");
1101 descr = descr->next;
1102 } while (descr != start);
1103 #endif
1108 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1110 * If the driver fails to keep up and empty the queue, then the
1111 * hardware wil run out of room to put incoming packets. This
1112 * will cause the hardware to skip descrs that are full (instead
1113 * of halting/retrying). Thus, once the driver runs, it wil need
1114 * to "catch up" to where the hardware chain pointer is at.
1116 static void spider_net_resync_head_ptr(struct spider_net_card *card)
1118 unsigned long flags;
1119 struct spider_net_descr_chain *chain = &card->rx_chain;
1120 struct spider_net_descr *descr;
1121 int i, status;
1123 /* Advance head pointer past any empty descrs */
1124 descr = chain->head;
1125 status = spider_net_get_descr_status(descr->hwdescr);
1127 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
1128 return;
1130 spin_lock_irqsave(&chain->lock, flags);
1132 descr = chain->head;
1133 status = spider_net_get_descr_status(descr->hwdescr);
1134 for (i=0; i<chain->num_desc; i++) {
1135 if (status != SPIDER_NET_DESCR_CARDOWNED) break;
1136 descr = descr->next;
1137 status = spider_net_get_descr_status(descr->hwdescr);
1139 chain->head = descr;
1141 spin_unlock_irqrestore(&chain->lock, flags);
1144 static int spider_net_resync_tail_ptr(struct spider_net_card *card)
1146 struct spider_net_descr_chain *chain = &card->rx_chain;
1147 struct spider_net_descr *descr;
1148 int i, status;
1150 /* Advance tail pointer past any empty and reaped descrs */
1151 descr = chain->tail;
1152 status = spider_net_get_descr_status(descr->hwdescr);
1154 for (i=0; i<chain->num_desc; i++) {
1155 if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
1156 (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
1157 descr = descr->next;
1158 status = spider_net_get_descr_status(descr->hwdescr);
1160 chain->tail = descr;
1162 if ((i == chain->num_desc) || (i == 0))
1163 return 1;
1164 return 0;
1168 * spider_net_decode_one_descr - processes an RX descriptor
1169 * @card: card structure
1171 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1173 * Processes an RX descriptor by iommu-unmapping the data buffer
1174 * and passing the packet up to the stack. This function is called
1175 * in softirq context, e.g. either bottom half from interrupt or
1176 * NAPI polling context.
1178 static int
1179 spider_net_decode_one_descr(struct spider_net_card *card)
1181 struct net_device *dev = card->netdev;
1182 struct spider_net_descr_chain *chain = &card->rx_chain;
1183 struct spider_net_descr *descr = chain->tail;
1184 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1185 u32 hw_buf_addr;
1186 int status;
1188 status = spider_net_get_descr_status(hwdescr);
1190 /* Nothing in the descriptor, or ring must be empty */
1191 if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1192 (status == SPIDER_NET_DESCR_NOT_IN_USE))
1193 return 0;
1195 /* descriptor definitively used -- move on tail */
1196 chain->tail = descr->next;
1198 /* unmap descriptor */
1199 hw_buf_addr = hwdescr->buf_addr;
1200 hwdescr->buf_addr = 0xffffffff;
1201 pci_unmap_single(card->pdev, hw_buf_addr,
1202 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1204 if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1205 (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1206 (status == SPIDER_NET_DESCR_FORCE_END) ) {
1207 if (netif_msg_rx_err(card))
1208 dev_err(&dev->dev,
1209 "dropping RX descriptor with state %d\n", status);
1210 dev->stats.rx_dropped++;
1211 goto bad_desc;
1214 if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1215 (status != SPIDER_NET_DESCR_FRAME_END) ) {
1216 if (netif_msg_rx_err(card))
1217 dev_err(&card->netdev->dev,
1218 "RX descriptor with unknown state %d\n", status);
1219 card->spider_stats.rx_desc_unk_state++;
1220 goto bad_desc;
1223 /* The cases we'll throw away the packet immediately */
1224 if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1225 if (netif_msg_rx_err(card))
1226 dev_err(&card->netdev->dev,
1227 "error in received descriptor found, "
1228 "data_status=x%08x, data_error=x%08x\n",
1229 hwdescr->data_status, hwdescr->data_error);
1230 goto bad_desc;
1233 if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
1234 dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
1235 hwdescr->dmac_cmd_status);
1236 pr_err("buf_addr=x%08x\n", hw_buf_addr);
1237 pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1238 pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1239 pr_err("result_size=x%08x\n", hwdescr->result_size);
1240 pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1241 pr_err("data_status=x%08x\n", hwdescr->data_status);
1242 pr_err("data_error=x%08x\n", hwdescr->data_error);
1243 pr_err("which=%ld\n", descr - card->rx_chain.ring);
1245 card->spider_stats.rx_desc_error++;
1246 goto bad_desc;
1249 /* Ok, we've got a packet in descr */
1250 spider_net_pass_skb_up(descr, card);
1251 descr->skb = NULL;
1252 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1253 return 1;
1255 bad_desc:
1256 if (netif_msg_rx_err(card))
1257 show_rx_chain(card);
1258 dev_kfree_skb_irq(descr->skb);
1259 descr->skb = NULL;
1260 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1261 return 0;
1265 * spider_net_poll - NAPI poll function called by the stack to return packets
1266 * @netdev: interface device structure
1267 * @budget: number of packets we can pass to the stack at most
1269 * returns 0 if no more packets available to the driver/stack. Returns 1,
1270 * if the quota is exceeded, but the driver has still packets.
1272 * spider_net_poll returns all packets from the rx descriptors to the stack
1273 * (using netif_receive_skb). If all/enough packets are up, the driver
1274 * reenables interrupts and returns 0. If not, 1 is returned.
1276 static int spider_net_poll(struct napi_struct *napi, int budget)
1278 struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
1279 int packets_done = 0;
1281 while (packets_done < budget) {
1282 if (!spider_net_decode_one_descr(card))
1283 break;
1285 packets_done++;
1288 if ((packets_done == 0) && (card->num_rx_ints != 0)) {
1289 if (!spider_net_resync_tail_ptr(card))
1290 packets_done = budget;
1291 spider_net_resync_head_ptr(card);
1293 card->num_rx_ints = 0;
1295 spider_net_refill_rx_chain(card);
1296 spider_net_enable_rxdmac(card);
1298 spider_net_cleanup_tx_ring(card);
1300 /* if all packets are in the stack, enable interrupts and return 0 */
1301 /* if not, return 1 */
1302 if (packets_done < budget) {
1303 napi_complete(napi);
1304 spider_net_rx_irq_on(card);
1305 card->ignore_rx_ramfull = 0;
1308 return packets_done;
1312 * spider_net_change_mtu - changes the MTU of an interface
1313 * @netdev: interface device structure
1314 * @new_mtu: new MTU value
1316 * returns 0 on success, <0 on failure
1318 static int
1319 spider_net_change_mtu(struct net_device *netdev, int new_mtu)
1321 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1322 * and mtu is outbound only anyway */
1323 if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
1324 (new_mtu > SPIDER_NET_MAX_MTU) )
1325 return -EINVAL;
1326 netdev->mtu = new_mtu;
1327 return 0;
1331 * spider_net_set_mac - sets the MAC of an interface
1332 * @netdev: interface device structure
1333 * @ptr: pointer to new MAC address
1335 * Returns 0 on success, <0 on failure. Currently, we don't support this
1336 * and will always return EOPNOTSUPP.
1338 static int
1339 spider_net_set_mac(struct net_device *netdev, void *p)
1341 struct spider_net_card *card = netdev_priv(netdev);
1342 u32 macl, macu, regvalue;
1343 struct sockaddr *addr = p;
1345 if (!is_valid_ether_addr(addr->sa_data))
1346 return -EADDRNOTAVAIL;
1348 /* switch off GMACTPE and GMACRPE */
1349 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1350 regvalue &= ~((1 << 5) | (1 << 6));
1351 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1353 /* write mac */
1354 macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
1355 (addr->sa_data[2]<<8) + (addr->sa_data[3]);
1356 macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
1357 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1358 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1360 /* switch GMACTPE and GMACRPE back on */
1361 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1362 regvalue |= ((1 << 5) | (1 << 6));
1363 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1365 spider_net_set_promisc(card);
1367 /* look up, whether we have been successful */
1368 if (spider_net_get_mac_address(netdev))
1369 return -EADDRNOTAVAIL;
1370 if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
1371 return -EADDRNOTAVAIL;
1373 return 0;
1377 * spider_net_link_reset
1378 * @netdev: net device structure
1380 * This is called when the PHY_LINK signal is asserted. For the blade this is
1381 * not connected so we should never get here.
1384 static void
1385 spider_net_link_reset(struct net_device *netdev)
1388 struct spider_net_card *card = netdev_priv(netdev);
1390 del_timer_sync(&card->aneg_timer);
1392 /* clear interrupt, block further interrupts */
1393 spider_net_write_reg(card, SPIDER_NET_GMACST,
1394 spider_net_read_reg(card, SPIDER_NET_GMACST));
1395 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1397 /* reset phy and setup aneg */
1398 card->aneg_count = 0;
1399 card->medium = BCM54XX_COPPER;
1400 spider_net_setup_aneg(card);
1401 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1406 * spider_net_handle_error_irq - handles errors raised by an interrupt
1407 * @card: card structure
1408 * @status_reg: interrupt status register 0 (GHIINT0STS)
1410 * spider_net_handle_error_irq treats or ignores all error conditions
1411 * found when an interrupt is presented
1413 static void
1414 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
1415 u32 error_reg1, u32 error_reg2)
1417 u32 i;
1418 int show_error = 1;
1420 /* check GHIINT0STS ************************************/
1421 if (status_reg)
1422 for (i = 0; i < 32; i++)
1423 if (status_reg & (1<<i))
1424 switch (i)
1426 /* let error_reg1 and error_reg2 evaluation decide, what to do
1427 case SPIDER_NET_PHYINT:
1428 case SPIDER_NET_GMAC2INT:
1429 case SPIDER_NET_GMAC1INT:
1430 case SPIDER_NET_GFIFOINT:
1431 case SPIDER_NET_DMACINT:
1432 case SPIDER_NET_GSYSINT:
1433 break; */
1435 case SPIDER_NET_GIPSINT:
1436 show_error = 0;
1437 break;
1439 case SPIDER_NET_GPWOPCMPINT:
1440 /* PHY write operation completed */
1441 show_error = 0;
1442 break;
1443 case SPIDER_NET_GPROPCMPINT:
1444 /* PHY read operation completed */
1445 /* we don't use semaphores, as we poll for the completion
1446 * of the read operation in spider_net_read_phy. Should take
1447 * about 50 us */
1448 show_error = 0;
1449 break;
1450 case SPIDER_NET_GPWFFINT:
1451 /* PHY command queue full */
1452 if (netif_msg_intr(card))
1453 dev_err(&card->netdev->dev, "PHY write queue full\n");
1454 show_error = 0;
1455 break;
1457 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1458 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1459 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1461 case SPIDER_NET_GDTDEN0INT:
1462 /* someone has set TX_DMA_EN to 0 */
1463 show_error = 0;
1464 break;
1466 case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1467 case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1468 case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1469 case SPIDER_NET_GDADEN0INT:
1470 /* someone has set RX_DMA_EN to 0 */
1471 show_error = 0;
1472 break;
1474 /* RX interrupts */
1475 case SPIDER_NET_GDDFDCINT:
1476 case SPIDER_NET_GDCFDCINT:
1477 case SPIDER_NET_GDBFDCINT:
1478 case SPIDER_NET_GDAFDCINT:
1479 /* case SPIDER_NET_GDNMINT: not used. print a message */
1480 /* case SPIDER_NET_GCNMINT: not used. print a message */
1481 /* case SPIDER_NET_GBNMINT: not used. print a message */
1482 /* case SPIDER_NET_GANMINT: not used. print a message */
1483 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1484 show_error = 0;
1485 break;
1487 /* TX interrupts */
1488 case SPIDER_NET_GDTFDCINT:
1489 show_error = 0;
1490 break;
1491 case SPIDER_NET_GTTEDINT:
1492 show_error = 0;
1493 break;
1494 case SPIDER_NET_GDTDCEINT:
1495 /* chain end. If a descriptor should be sent, kick off
1496 * tx dma
1497 if (card->tx_chain.tail != card->tx_chain.head)
1498 spider_net_kick_tx_dma(card);
1500 show_error = 0;
1501 break;
1503 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1504 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1507 /* check GHIINT1STS ************************************/
1508 if (error_reg1)
1509 for (i = 0; i < 32; i++)
1510 if (error_reg1 & (1<<i))
1511 switch (i)
1513 case SPIDER_NET_GTMFLLINT:
1514 /* TX RAM full may happen on a usual case.
1515 * Logging is not needed. */
1516 show_error = 0;
1517 break;
1518 case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1519 case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1520 case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1521 case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1522 case SPIDER_NET_GRMFLLINT:
1523 /* Could happen when rx chain is full */
1524 if (card->ignore_rx_ramfull == 0) {
1525 card->ignore_rx_ramfull = 1;
1526 spider_net_resync_head_ptr(card);
1527 spider_net_refill_rx_chain(card);
1528 spider_net_enable_rxdmac(card);
1529 card->num_rx_ints ++;
1530 napi_schedule(&card->napi);
1532 show_error = 0;
1533 break;
1535 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1536 case SPIDER_NET_GDTINVDINT:
1537 /* allrighty. tx from previous descr ok */
1538 show_error = 0;
1539 break;
1541 /* chain end */
1542 case SPIDER_NET_GDDDCEINT: /* fallthrough */
1543 case SPIDER_NET_GDCDCEINT: /* fallthrough */
1544 case SPIDER_NET_GDBDCEINT: /* fallthrough */
1545 case SPIDER_NET_GDADCEINT:
1546 spider_net_resync_head_ptr(card);
1547 spider_net_refill_rx_chain(card);
1548 spider_net_enable_rxdmac(card);
1549 card->num_rx_ints ++;
1550 napi_schedule(&card->napi);
1551 show_error = 0;
1552 break;
1554 /* invalid descriptor */
1555 case SPIDER_NET_GDDINVDINT: /* fallthrough */
1556 case SPIDER_NET_GDCINVDINT: /* fallthrough */
1557 case SPIDER_NET_GDBINVDINT: /* fallthrough */
1558 case SPIDER_NET_GDAINVDINT:
1559 /* Could happen when rx chain is full */
1560 spider_net_resync_head_ptr(card);
1561 spider_net_refill_rx_chain(card);
1562 spider_net_enable_rxdmac(card);
1563 card->num_rx_ints ++;
1564 napi_schedule(&card->napi);
1565 show_error = 0;
1566 break;
1568 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1569 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1570 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1571 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1572 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1573 /* case SPIDER_NET_GDSERINT: problem, print a message */
1574 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1575 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1576 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1577 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1578 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1579 default:
1580 show_error = 1;
1581 break;
1584 /* check GHIINT2STS ************************************/
1585 if (error_reg2)
1586 for (i = 0; i < 32; i++)
1587 if (error_reg2 & (1<<i))
1588 switch (i)
1590 /* there is nothing we can (want to) do at this time. Log a
1591 * message, we can switch on and off the specific values later on
1592 case SPIDER_NET_GPROPERINT:
1593 case SPIDER_NET_GMCTCRSNGINT:
1594 case SPIDER_NET_GMCTLCOLINT:
1595 case SPIDER_NET_GMCTTMOTINT:
1596 case SPIDER_NET_GMCRCAERINT:
1597 case SPIDER_NET_GMCRCALERINT:
1598 case SPIDER_NET_GMCRALNERINT:
1599 case SPIDER_NET_GMCROVRINT:
1600 case SPIDER_NET_GMCRRNTINT:
1601 case SPIDER_NET_GMCRRXERINT:
1602 case SPIDER_NET_GTITCSERINT:
1603 case SPIDER_NET_GTIFMTERINT:
1604 case SPIDER_NET_GTIPKTRVKINT:
1605 case SPIDER_NET_GTISPINGINT:
1606 case SPIDER_NET_GTISADNGINT:
1607 case SPIDER_NET_GTISPDNGINT:
1608 case SPIDER_NET_GRIFMTERINT:
1609 case SPIDER_NET_GRIPKTRVKINT:
1610 case SPIDER_NET_GRISPINGINT:
1611 case SPIDER_NET_GRISADNGINT:
1612 case SPIDER_NET_GRISPDNGINT:
1613 break;
1615 default:
1616 break;
1619 if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1620 dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
1621 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1622 status_reg, error_reg1, error_reg2);
1624 /* clear interrupt sources */
1625 spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1626 spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1630 * spider_net_interrupt - interrupt handler for spider_net
1631 * @irq: interrupt number
1632 * @ptr: pointer to net_device
1634 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1635 * interrupt found raised by card.
1637 * This is the interrupt handler, that turns off
1638 * interrupts for this device and makes the stack poll the driver
1640 static irqreturn_t
1641 spider_net_interrupt(int irq, void *ptr)
1643 struct net_device *netdev = ptr;
1644 struct spider_net_card *card = netdev_priv(netdev);
1645 u32 status_reg, error_reg1, error_reg2;
1647 status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1648 error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1649 error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1651 if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
1652 !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
1653 !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
1654 return IRQ_NONE;
1656 if (status_reg & SPIDER_NET_RXINT ) {
1657 spider_net_rx_irq_off(card);
1658 napi_schedule(&card->napi);
1659 card->num_rx_ints ++;
1661 if (status_reg & SPIDER_NET_TXINT)
1662 napi_schedule(&card->napi);
1664 if (status_reg & SPIDER_NET_LINKINT)
1665 spider_net_link_reset(netdev);
1667 if (status_reg & SPIDER_NET_ERRINT )
1668 spider_net_handle_error_irq(card, status_reg,
1669 error_reg1, error_reg2);
1671 /* clear interrupt sources */
1672 spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1674 return IRQ_HANDLED;
1677 #ifdef CONFIG_NET_POLL_CONTROLLER
1679 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1680 * @netdev: interface device structure
1682 * see Documentation/networking/netconsole.txt
1684 static void
1685 spider_net_poll_controller(struct net_device *netdev)
1687 disable_irq(netdev->irq);
1688 spider_net_interrupt(netdev->irq, netdev);
1689 enable_irq(netdev->irq);
1691 #endif /* CONFIG_NET_POLL_CONTROLLER */
1694 * spider_net_enable_interrupts - enable interrupts
1695 * @card: card structure
1697 * spider_net_enable_interrupt enables several interrupts
1699 static void
1700 spider_net_enable_interrupts(struct spider_net_card *card)
1702 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1703 SPIDER_NET_INT0_MASK_VALUE);
1704 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1705 SPIDER_NET_INT1_MASK_VALUE);
1706 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1707 SPIDER_NET_INT2_MASK_VALUE);
1711 * spider_net_disable_interrupts - disable interrupts
1712 * @card: card structure
1714 * spider_net_disable_interrupts disables all the interrupts
1716 static void
1717 spider_net_disable_interrupts(struct spider_net_card *card)
1719 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
1720 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
1721 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
1722 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1726 * spider_net_init_card - initializes the card
1727 * @card: card structure
1729 * spider_net_init_card initializes the card so that other registers can
1730 * be used
1732 static void
1733 spider_net_init_card(struct spider_net_card *card)
1735 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1736 SPIDER_NET_CKRCTRL_STOP_VALUE);
1738 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1739 SPIDER_NET_CKRCTRL_RUN_VALUE);
1741 /* trigger ETOMOD signal */
1742 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1743 spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1745 spider_net_disable_interrupts(card);
1749 * spider_net_enable_card - enables the card by setting all kinds of regs
1750 * @card: card structure
1752 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1754 static void
1755 spider_net_enable_card(struct spider_net_card *card)
1757 int i;
1758 /* the following array consists of (register),(value) pairs
1759 * that are set in this function. A register of 0 ends the list */
1760 u32 regs[][2] = {
1761 { SPIDER_NET_GRESUMINTNUM, 0 },
1762 { SPIDER_NET_GREINTNUM, 0 },
1764 /* set interrupt frame number registers */
1765 /* clear the single DMA engine registers first */
1766 { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1767 { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1768 { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1769 { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1770 /* then set, what we really need */
1771 { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1773 /* timer counter registers and stuff */
1774 { SPIDER_NET_GFREECNNUM, 0 },
1775 { SPIDER_NET_GONETIMENUM, 0 },
1776 { SPIDER_NET_GTOUTFRMNUM, 0 },
1778 /* RX mode setting */
1779 { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1780 /* TX mode setting */
1781 { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1782 /* IPSEC mode setting */
1783 { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1785 { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1787 { SPIDER_NET_GMRWOLCTRL, 0 },
1788 { SPIDER_NET_GTESTMD, 0x10000000 },
1789 { SPIDER_NET_GTTQMSK, 0x00400040 },
1791 { SPIDER_NET_GMACINTEN, 0 },
1793 /* flow control stuff */
1794 { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1795 { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1797 { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1798 { 0, 0}
1801 i = 0;
1802 while (regs[i][0]) {
1803 spider_net_write_reg(card, regs[i][0], regs[i][1]);
1804 i++;
1807 /* clear unicast filter table entries 1 to 14 */
1808 for (i = 1; i <= 14; i++) {
1809 spider_net_write_reg(card,
1810 SPIDER_NET_GMRUAFILnR + i * 8,
1811 0x00080000);
1812 spider_net_write_reg(card,
1813 SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1814 0x00000000);
1817 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1819 spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1821 /* set chain tail address for RX chains and
1822 * enable DMA */
1823 spider_net_enable_rxchtails(card);
1824 spider_net_enable_rxdmac(card);
1826 spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1828 spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1829 SPIDER_NET_LENLMT_VALUE);
1830 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1831 SPIDER_NET_OPMODE_VALUE);
1833 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1834 SPIDER_NET_GDTBSTA);
1838 * spider_net_download_firmware - loads firmware into the adapter
1839 * @card: card structure
1840 * @firmware_ptr: pointer to firmware data
1842 * spider_net_download_firmware loads the firmware data into the
1843 * adapter. It assumes the length etc. to be allright.
1845 static int
1846 spider_net_download_firmware(struct spider_net_card *card,
1847 const void *firmware_ptr)
1849 int sequencer, i;
1850 const u32 *fw_ptr = firmware_ptr;
1852 /* stop sequencers */
1853 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1854 SPIDER_NET_STOP_SEQ_VALUE);
1856 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1857 sequencer++) {
1858 spider_net_write_reg(card,
1859 SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1860 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1861 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1862 sequencer * 8, *fw_ptr);
1863 fw_ptr++;
1867 if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1868 return -EIO;
1870 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1871 SPIDER_NET_RUN_SEQ_VALUE);
1873 return 0;
1877 * spider_net_init_firmware - reads in firmware parts
1878 * @card: card structure
1880 * Returns 0 on success, <0 on failure
1882 * spider_net_init_firmware opens the sequencer firmware and does some basic
1883 * checks. This function opens and releases the firmware structure. A call
1884 * to download the firmware is performed before the release.
1886 * Firmware format
1887 * ===============
1888 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1889 * the program for each sequencer. Use the command
1890 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1891 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1892 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1894 * to generate spider_fw.bin, if you have sequencer programs with something
1895 * like the following contents for each sequencer:
1896 * <ONE LINE COMMENT>
1897 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1898 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1899 * ...
1900 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1902 static int
1903 spider_net_init_firmware(struct spider_net_card *card)
1905 struct firmware *firmware = NULL;
1906 struct device_node *dn;
1907 const u8 *fw_prop = NULL;
1908 int err = -ENOENT;
1909 int fw_size;
1911 if (request_firmware((const struct firmware **)&firmware,
1912 SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1913 if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1914 netif_msg_probe(card) ) {
1915 dev_err(&card->netdev->dev,
1916 "Incorrect size of spidernet firmware in " \
1917 "filesystem. Looking in host firmware...\n");
1918 goto try_host_fw;
1920 err = spider_net_download_firmware(card, firmware->data);
1922 release_firmware(firmware);
1923 if (err)
1924 goto try_host_fw;
1926 goto done;
1929 try_host_fw:
1930 dn = pci_device_to_OF_node(card->pdev);
1931 if (!dn)
1932 goto out_err;
1934 fw_prop = of_get_property(dn, "firmware", &fw_size);
1935 if (!fw_prop)
1936 goto out_err;
1938 if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1939 netif_msg_probe(card) ) {
1940 dev_err(&card->netdev->dev,
1941 "Incorrect size of spidernet firmware in host firmware\n");
1942 goto done;
1945 err = spider_net_download_firmware(card, fw_prop);
1947 done:
1948 return err;
1949 out_err:
1950 if (netif_msg_probe(card))
1951 dev_err(&card->netdev->dev,
1952 "Couldn't find spidernet firmware in filesystem " \
1953 "or host firmware\n");
1954 return err;
1958 * spider_net_open - called upon ifonfig up
1959 * @netdev: interface device structure
1961 * returns 0 on success, <0 on failure
1963 * spider_net_open allocates all the descriptors and memory needed for
1964 * operation, sets up multicast list and enables interrupts
1967 spider_net_open(struct net_device *netdev)
1969 struct spider_net_card *card = netdev_priv(netdev);
1970 int result;
1972 result = spider_net_init_firmware(card);
1973 if (result)
1974 goto init_firmware_failed;
1976 /* start probing with copper */
1977 card->aneg_count = 0;
1978 card->medium = BCM54XX_COPPER;
1979 spider_net_setup_aneg(card);
1980 if (card->phy.def->phy_id)
1981 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1983 result = spider_net_init_chain(card, &card->tx_chain);
1984 if (result)
1985 goto alloc_tx_failed;
1986 card->low_watermark = NULL;
1988 result = spider_net_init_chain(card, &card->rx_chain);
1989 if (result)
1990 goto alloc_rx_failed;
1992 /* Allocate rx skbs */
1993 if (spider_net_alloc_rx_skbs(card))
1994 goto alloc_skbs_failed;
1996 spider_net_set_multi(netdev);
1998 /* further enhancement: setup hw vlan, if needed */
2000 result = -EBUSY;
2001 if (request_irq(netdev->irq, spider_net_interrupt,
2002 IRQF_SHARED, netdev->name, netdev))
2003 goto register_int_failed;
2005 spider_net_enable_card(card);
2007 netif_start_queue(netdev);
2008 netif_carrier_on(netdev);
2009 napi_enable(&card->napi);
2011 spider_net_enable_interrupts(card);
2013 return 0;
2015 register_int_failed:
2016 spider_net_free_rx_chain_contents(card);
2017 alloc_skbs_failed:
2018 spider_net_free_chain(card, &card->rx_chain);
2019 alloc_rx_failed:
2020 spider_net_free_chain(card, &card->tx_chain);
2021 alloc_tx_failed:
2022 del_timer_sync(&card->aneg_timer);
2023 init_firmware_failed:
2024 return result;
2028 * spider_net_link_phy
2029 * @data: used for pointer to card structure
2032 static void spider_net_link_phy(unsigned long data)
2034 struct spider_net_card *card = (struct spider_net_card *)data;
2035 struct mii_phy *phy = &card->phy;
2037 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2038 if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
2040 pr_debug("%s: link is down trying to bring it up\n",
2041 card->netdev->name);
2043 switch (card->medium) {
2044 case BCM54XX_COPPER:
2045 /* enable fiber with autonegotiation first */
2046 if (phy->def->ops->enable_fiber)
2047 phy->def->ops->enable_fiber(phy, 1);
2048 card->medium = BCM54XX_FIBER;
2049 break;
2051 case BCM54XX_FIBER:
2052 /* fiber didn't come up, try to disable fiber autoneg */
2053 if (phy->def->ops->enable_fiber)
2054 phy->def->ops->enable_fiber(phy, 0);
2055 card->medium = BCM54XX_UNKNOWN;
2056 break;
2058 case BCM54XX_UNKNOWN:
2059 /* copper, fiber with and without failed,
2060 * retry from beginning */
2061 spider_net_setup_aneg(card);
2062 card->medium = BCM54XX_COPPER;
2063 break;
2066 card->aneg_count = 0;
2067 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2068 return;
2071 /* link still not up, try again later */
2072 if (!(phy->def->ops->poll_link(phy))) {
2073 card->aneg_count++;
2074 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2075 return;
2078 /* link came up, get abilities */
2079 phy->def->ops->read_link(phy);
2081 spider_net_write_reg(card, SPIDER_NET_GMACST,
2082 spider_net_read_reg(card, SPIDER_NET_GMACST));
2083 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
2085 if (phy->speed == 1000)
2086 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
2087 else
2088 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
2090 card->aneg_count = 0;
2092 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2093 card->netdev->name, phy->speed,
2094 phy->duplex == 1 ? "Full" : "Half",
2095 phy->autoneg == 1 ? "" : "no ");
2099 * spider_net_setup_phy - setup PHY
2100 * @card: card structure
2102 * returns 0 on success, <0 on failure
2104 * spider_net_setup_phy is used as part of spider_net_probe.
2106 static int
2107 spider_net_setup_phy(struct spider_net_card *card)
2109 struct mii_phy *phy = &card->phy;
2111 spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2112 SPIDER_NET_DMASEL_VALUE);
2113 spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2114 SPIDER_NET_PHY_CTRL_VALUE);
2116 phy->dev = card->netdev;
2117 phy->mdio_read = spider_net_read_phy;
2118 phy->mdio_write = spider_net_write_phy;
2120 for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2121 unsigned short id;
2122 id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2123 if (id != 0x0000 && id != 0xffff) {
2124 if (!mii_phy_probe(phy, phy->mii_id)) {
2125 pr_info("Found %s.\n", phy->def->name);
2126 break;
2131 return 0;
2135 * spider_net_workaround_rxramfull - work around firmware bug
2136 * @card: card structure
2138 * no return value
2140 static void
2141 spider_net_workaround_rxramfull(struct spider_net_card *card)
2143 int i, sequencer = 0;
2145 /* cancel reset */
2146 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2147 SPIDER_NET_CKRCTRL_RUN_VALUE);
2149 /* empty sequencer data */
2150 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2151 sequencer++) {
2152 spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2153 sequencer * 8, 0x0);
2154 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2155 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2156 sequencer * 8, 0x0);
2160 /* set sequencer operation */
2161 spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2163 /* reset */
2164 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2165 SPIDER_NET_CKRCTRL_STOP_VALUE);
2169 * spider_net_stop - called upon ifconfig down
2170 * @netdev: interface device structure
2172 * always returns 0
2175 spider_net_stop(struct net_device *netdev)
2177 struct spider_net_card *card = netdev_priv(netdev);
2179 napi_disable(&card->napi);
2180 netif_carrier_off(netdev);
2181 netif_stop_queue(netdev);
2182 del_timer_sync(&card->tx_timer);
2183 del_timer_sync(&card->aneg_timer);
2185 spider_net_disable_interrupts(card);
2187 free_irq(netdev->irq, netdev);
2189 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2190 SPIDER_NET_DMA_TX_FEND_VALUE);
2192 /* turn off DMA, force end */
2193 spider_net_disable_rxdmac(card);
2195 /* release chains */
2196 spider_net_release_tx_chain(card, 1);
2197 spider_net_free_rx_chain_contents(card);
2199 spider_net_free_chain(card, &card->tx_chain);
2200 spider_net_free_chain(card, &card->rx_chain);
2202 return 0;
2206 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2207 * function (to be called not under interrupt status)
2208 * @data: data, is interface device structure
2210 * called as task when tx hangs, resets interface (if interface is up)
2212 static void
2213 spider_net_tx_timeout_task(struct work_struct *work)
2215 struct spider_net_card *card =
2216 container_of(work, struct spider_net_card, tx_timeout_task);
2217 struct net_device *netdev = card->netdev;
2219 if (!(netdev->flags & IFF_UP))
2220 goto out;
2222 netif_device_detach(netdev);
2223 spider_net_stop(netdev);
2225 spider_net_workaround_rxramfull(card);
2226 spider_net_init_card(card);
2228 if (spider_net_setup_phy(card))
2229 goto out;
2231 spider_net_open(netdev);
2232 spider_net_kick_tx_dma(card);
2233 netif_device_attach(netdev);
2235 out:
2236 atomic_dec(&card->tx_timeout_task_counter);
2240 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2241 * @netdev: interface device structure
2243 * called, if tx hangs. Schedules a task that resets the interface
2245 static void
2246 spider_net_tx_timeout(struct net_device *netdev)
2248 struct spider_net_card *card;
2250 card = netdev_priv(netdev);
2251 atomic_inc(&card->tx_timeout_task_counter);
2252 if (netdev->flags & IFF_UP)
2253 schedule_work(&card->tx_timeout_task);
2254 else
2255 atomic_dec(&card->tx_timeout_task_counter);
2256 card->spider_stats.tx_timeouts++;
2259 static const struct net_device_ops spider_net_ops = {
2260 .ndo_open = spider_net_open,
2261 .ndo_stop = spider_net_stop,
2262 .ndo_start_xmit = spider_net_xmit,
2263 .ndo_set_multicast_list = spider_net_set_multi,
2264 .ndo_set_mac_address = spider_net_set_mac,
2265 .ndo_change_mtu = spider_net_change_mtu,
2266 .ndo_do_ioctl = spider_net_do_ioctl,
2267 .ndo_tx_timeout = spider_net_tx_timeout,
2268 .ndo_validate_addr = eth_validate_addr,
2269 /* HW VLAN */
2270 #ifdef CONFIG_NET_POLL_CONTROLLER
2271 /* poll controller */
2272 .ndo_poll_controller = spider_net_poll_controller,
2273 #endif /* CONFIG_NET_POLL_CONTROLLER */
2277 * spider_net_setup_netdev_ops - initialization of net_device operations
2278 * @netdev: net_device structure
2280 * fills out function pointers in the net_device structure
2282 static void
2283 spider_net_setup_netdev_ops(struct net_device *netdev)
2285 netdev->netdev_ops = &spider_net_ops;
2286 netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2287 /* ethtool ops */
2288 netdev->ethtool_ops = &spider_net_ethtool_ops;
2292 * spider_net_setup_netdev - initialization of net_device
2293 * @card: card structure
2295 * Returns 0 on success or <0 on failure
2297 * spider_net_setup_netdev initializes the net_device structure
2299 static int
2300 spider_net_setup_netdev(struct spider_net_card *card)
2302 int result;
2303 struct net_device *netdev = card->netdev;
2304 struct device_node *dn;
2305 struct sockaddr addr;
2306 const u8 *mac;
2308 SET_NETDEV_DEV(netdev, &card->pdev->dev);
2310 pci_set_drvdata(card->pdev, netdev);
2312 init_timer(&card->tx_timer);
2313 card->tx_timer.function =
2314 (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2315 card->tx_timer.data = (unsigned long) card;
2316 netdev->irq = card->pdev->irq;
2318 card->aneg_count = 0;
2319 init_timer(&card->aneg_timer);
2320 card->aneg_timer.function = spider_net_link_phy;
2321 card->aneg_timer.data = (unsigned long) card;
2323 netif_napi_add(netdev, &card->napi,
2324 spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
2326 spider_net_setup_netdev_ops(netdev);
2328 netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM;
2329 if (SPIDER_NET_RX_CSUM_DEFAULT)
2330 netdev->features |= NETIF_F_RXCSUM;
2331 netdev->features |= NETIF_F_IP_CSUM | NETIF_F_LLTX;
2332 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2333 * NETIF_F_HW_VLAN_FILTER */
2335 netdev->irq = card->pdev->irq;
2336 card->num_rx_ints = 0;
2337 card->ignore_rx_ramfull = 0;
2339 dn = pci_device_to_OF_node(card->pdev);
2340 if (!dn)
2341 return -EIO;
2343 mac = of_get_property(dn, "local-mac-address", NULL);
2344 if (!mac)
2345 return -EIO;
2346 memcpy(addr.sa_data, mac, ETH_ALEN);
2348 result = spider_net_set_mac(netdev, &addr);
2349 if ((result) && (netif_msg_probe(card)))
2350 dev_err(&card->netdev->dev,
2351 "Failed to set MAC address: %i\n", result);
2353 result = register_netdev(netdev);
2354 if (result) {
2355 if (netif_msg_probe(card))
2356 dev_err(&card->netdev->dev,
2357 "Couldn't register net_device: %i\n", result);
2358 return result;
2361 if (netif_msg_probe(card))
2362 pr_info("Initialized device %s.\n", netdev->name);
2364 return 0;
2368 * spider_net_alloc_card - allocates net_device and card structure
2370 * returns the card structure or NULL in case of errors
2372 * the card and net_device structures are linked to each other
2374 static struct spider_net_card *
2375 spider_net_alloc_card(void)
2377 struct net_device *netdev;
2378 struct spider_net_card *card;
2379 size_t alloc_size;
2381 alloc_size = sizeof(struct spider_net_card) +
2382 (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2383 netdev = alloc_etherdev(alloc_size);
2384 if (!netdev)
2385 return NULL;
2387 card = netdev_priv(netdev);
2388 card->netdev = netdev;
2389 card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2390 INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2391 init_waitqueue_head(&card->waitq);
2392 atomic_set(&card->tx_timeout_task_counter, 0);
2394 card->rx_chain.num_desc = rx_descriptors;
2395 card->rx_chain.ring = card->darray;
2396 card->tx_chain.num_desc = tx_descriptors;
2397 card->tx_chain.ring = card->darray + rx_descriptors;
2399 return card;
2403 * spider_net_undo_pci_setup - releases PCI ressources
2404 * @card: card structure
2406 * spider_net_undo_pci_setup releases the mapped regions
2408 static void
2409 spider_net_undo_pci_setup(struct spider_net_card *card)
2411 iounmap(card->regs);
2412 pci_release_regions(card->pdev);
2416 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2417 * @pdev: PCI device
2419 * Returns the card structure or NULL if any errors occur
2421 * spider_net_setup_pci_dev initializes pdev and together with the
2422 * functions called in spider_net_open configures the device so that
2423 * data can be transferred over it
2424 * The net_device structure is attached to the card structure, if the
2425 * function returns without error.
2427 static struct spider_net_card *
2428 spider_net_setup_pci_dev(struct pci_dev *pdev)
2430 struct spider_net_card *card;
2431 unsigned long mmio_start, mmio_len;
2433 if (pci_enable_device(pdev)) {
2434 dev_err(&pdev->dev, "Couldn't enable PCI device\n");
2435 return NULL;
2438 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2439 dev_err(&pdev->dev,
2440 "Couldn't find proper PCI device base address.\n");
2441 goto out_disable_dev;
2444 if (pci_request_regions(pdev, spider_net_driver_name)) {
2445 dev_err(&pdev->dev,
2446 "Couldn't obtain PCI resources, aborting.\n");
2447 goto out_disable_dev;
2450 pci_set_master(pdev);
2452 card = spider_net_alloc_card();
2453 if (!card) {
2454 dev_err(&pdev->dev,
2455 "Couldn't allocate net_device structure, aborting.\n");
2456 goto out_release_regions;
2458 card->pdev = pdev;
2460 /* fetch base address and length of first resource */
2461 mmio_start = pci_resource_start(pdev, 0);
2462 mmio_len = pci_resource_len(pdev, 0);
2464 card->netdev->mem_start = mmio_start;
2465 card->netdev->mem_end = mmio_start + mmio_len;
2466 card->regs = ioremap(mmio_start, mmio_len);
2468 if (!card->regs) {
2469 dev_err(&pdev->dev,
2470 "Couldn't obtain PCI resources, aborting.\n");
2471 goto out_release_regions;
2474 return card;
2476 out_release_regions:
2477 pci_release_regions(pdev);
2478 out_disable_dev:
2479 pci_disable_device(pdev);
2480 pci_set_drvdata(pdev, NULL);
2481 return NULL;
2485 * spider_net_probe - initialization of a device
2486 * @pdev: PCI device
2487 * @ent: entry in the device id list
2489 * Returns 0 on success, <0 on failure
2491 * spider_net_probe initializes pdev and registers a net_device
2492 * structure for it. After that, the device can be ifconfig'ed up
2494 static int __devinit
2495 spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2497 int err = -EIO;
2498 struct spider_net_card *card;
2500 card = spider_net_setup_pci_dev(pdev);
2501 if (!card)
2502 goto out;
2504 spider_net_workaround_rxramfull(card);
2505 spider_net_init_card(card);
2507 err = spider_net_setup_phy(card);
2508 if (err)
2509 goto out_undo_pci;
2511 err = spider_net_setup_netdev(card);
2512 if (err)
2513 goto out_undo_pci;
2515 return 0;
2517 out_undo_pci:
2518 spider_net_undo_pci_setup(card);
2519 free_netdev(card->netdev);
2520 out:
2521 return err;
2525 * spider_net_remove - removal of a device
2526 * @pdev: PCI device
2528 * Returns 0 on success, <0 on failure
2530 * spider_net_remove is called to remove the device and unregisters the
2531 * net_device
2533 static void __devexit
2534 spider_net_remove(struct pci_dev *pdev)
2536 struct net_device *netdev;
2537 struct spider_net_card *card;
2539 netdev = pci_get_drvdata(pdev);
2540 card = netdev_priv(netdev);
2542 wait_event(card->waitq,
2543 atomic_read(&card->tx_timeout_task_counter) == 0);
2545 unregister_netdev(netdev);
2547 /* switch off card */
2548 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2549 SPIDER_NET_CKRCTRL_STOP_VALUE);
2550 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2551 SPIDER_NET_CKRCTRL_RUN_VALUE);
2553 spider_net_undo_pci_setup(card);
2554 free_netdev(netdev);
2557 static struct pci_driver spider_net_driver = {
2558 .name = spider_net_driver_name,
2559 .id_table = spider_net_pci_tbl,
2560 .probe = spider_net_probe,
2561 .remove = __devexit_p(spider_net_remove)
2565 * spider_net_init - init function when the driver is loaded
2567 * spider_net_init registers the device driver
2569 static int __init spider_net_init(void)
2571 printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2573 if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2574 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2575 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2577 if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2578 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2579 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2581 if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2582 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2583 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2585 if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2586 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2587 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2590 return pci_register_driver(&spider_net_driver);
2594 * spider_net_cleanup - exit function when driver is unloaded
2596 * spider_net_cleanup unregisters the device driver
2598 static void __exit spider_net_cleanup(void)
2600 pci_unregister_driver(&spider_net_driver);
2603 module_init(spider_net_init);
2604 module_exit(spider_net_cleanup);