1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/pci.h>
36 #include <linux/pci-aspm.h>
37 #include <linux/slab.h>
38 #include <linux/dma-mapping.h>
39 #include <linux/delay.h>
40 #include <linux/sched.h>
41 #include <linux/skbuff.h>
42 #include <linux/netdevice.h>
43 #include <linux/wireless.h>
44 #include <linux/firmware.h>
45 #include <linux/etherdevice.h>
46 #include <linux/if_arp.h>
48 #include <net/ieee80211_radiotap.h>
49 #include <net/mac80211.h>
51 #include <asm/div64.h>
53 #define DRV_NAME "iwl3945"
56 #include "iwl-3945-fh.h"
57 #include "iwl-commands.h"
61 #include "iwl-helpers.h"
63 #include "iwl-spectrum.h"
66 * module name, copyright, version, etc.
69 #define DRV_DESCRIPTION \
70 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
72 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
79 * add "s" to indicate spectrum measurement included.
80 * we add it here to be consistent with previous releases in which
81 * this was configurable.
83 #define DRV_VERSION IWLWIFI_VERSION VD "s"
84 #define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
85 #define DRV_AUTHOR "<ilw@linux.intel.com>"
87 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
88 MODULE_VERSION(DRV_VERSION
);
89 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
90 MODULE_LICENSE("GPL");
92 /* module parameters */
93 struct iwl_mod_params iwl3945_mod_params
= {
97 /* the rest are 0 by default */
101 * iwl3945_get_antenna_flags - Get antenna flags for RXON command
102 * @priv: eeprom and antenna fields are used to determine antenna flags
104 * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
105 * iwl3945_mod_params.antenna specifies the antenna diversity mode:
107 * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
108 * IWL_ANTENNA_MAIN - Force MAIN antenna
109 * IWL_ANTENNA_AUX - Force AUX antenna
111 __le32
iwl3945_get_antenna_flags(const struct iwl_priv
*priv
)
113 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
115 switch (iwl3945_mod_params
.antenna
) {
116 case IWL_ANTENNA_DIVERSITY
:
119 case IWL_ANTENNA_MAIN
:
120 if (eeprom
->antenna_switch_type
)
121 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
122 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
124 case IWL_ANTENNA_AUX
:
125 if (eeprom
->antenna_switch_type
)
126 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
127 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
130 /* bad antenna selector value */
131 IWL_ERR(priv
, "Bad antenna selector value (0x%x)\n",
132 iwl3945_mod_params
.antenna
);
134 return 0; /* "diversity" is default if error */
137 static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv
*priv
,
138 struct ieee80211_key_conf
*keyconf
,
142 __le16 key_flags
= 0;
145 key_flags
|= (STA_KEY_FLG_CCMP
| STA_KEY_FLG_MAP_KEY_MSK
);
146 key_flags
|= cpu_to_le16(keyconf
->keyidx
<< STA_KEY_FLG_KEYID_POS
);
148 if (sta_id
== priv
->contexts
[IWL_RXON_CTX_BSS
].bcast_sta_id
)
149 key_flags
|= STA_KEY_MULTICAST_MSK
;
151 keyconf
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
152 keyconf
->hw_key_idx
= keyconf
->keyidx
;
153 key_flags
&= ~STA_KEY_FLG_INVALID
;
155 spin_lock_irqsave(&priv
->sta_lock
, flags
);
156 priv
->stations
[sta_id
].keyinfo
.cipher
= keyconf
->cipher
;
157 priv
->stations
[sta_id
].keyinfo
.keylen
= keyconf
->keylen
;
158 memcpy(priv
->stations
[sta_id
].keyinfo
.key
, keyconf
->key
,
161 memcpy(priv
->stations
[sta_id
].sta
.key
.key
, keyconf
->key
,
164 if ((priv
->stations
[sta_id
].sta
.key
.key_flags
& STA_KEY_FLG_ENCRYPT_MSK
)
165 == STA_KEY_FLG_NO_ENC
)
166 priv
->stations
[sta_id
].sta
.key
.key_offset
=
167 iwl_legacy_get_free_ucode_key_index(priv
);
168 /* else, we are overriding an existing key => no need to allocated room
171 WARN(priv
->stations
[sta_id
].sta
.key
.key_offset
== WEP_INVALID_OFFSET
,
172 "no space for a new key");
174 priv
->stations
[sta_id
].sta
.key
.key_flags
= key_flags
;
175 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
176 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
178 IWL_DEBUG_INFO(priv
, "hwcrypto: modify ucode station key info\n");
180 ret
= iwl_legacy_send_add_sta(priv
,
181 &priv
->stations
[sta_id
].sta
, CMD_ASYNC
);
183 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
188 static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv
*priv
,
189 struct ieee80211_key_conf
*keyconf
,
195 static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv
*priv
,
196 struct ieee80211_key_conf
*keyconf
,
202 static int iwl3945_clear_sta_key_info(struct iwl_priv
*priv
, u8 sta_id
)
205 struct iwl_legacy_addsta_cmd sta_cmd
;
207 spin_lock_irqsave(&priv
->sta_lock
, flags
);
208 memset(&priv
->stations
[sta_id
].keyinfo
, 0, sizeof(struct iwl_hw_key
));
209 memset(&priv
->stations
[sta_id
].sta
.key
, 0,
210 sizeof(struct iwl4965_keyinfo
));
211 priv
->stations
[sta_id
].sta
.key
.key_flags
= STA_KEY_FLG_NO_ENC
;
212 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
213 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
214 memcpy(&sta_cmd
, &priv
->stations
[sta_id
].sta
, sizeof(struct iwl_legacy_addsta_cmd
));
215 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
217 IWL_DEBUG_INFO(priv
, "hwcrypto: clear ucode station key info\n");
218 return iwl_legacy_send_add_sta(priv
, &sta_cmd
, CMD_SYNC
);
221 static int iwl3945_set_dynamic_key(struct iwl_priv
*priv
,
222 struct ieee80211_key_conf
*keyconf
, u8 sta_id
)
226 keyconf
->hw_key_idx
= HW_KEY_DYNAMIC
;
228 switch (keyconf
->cipher
) {
229 case WLAN_CIPHER_SUITE_CCMP
:
230 ret
= iwl3945_set_ccmp_dynamic_key_info(priv
, keyconf
, sta_id
);
232 case WLAN_CIPHER_SUITE_TKIP
:
233 ret
= iwl3945_set_tkip_dynamic_key_info(priv
, keyconf
, sta_id
);
235 case WLAN_CIPHER_SUITE_WEP40
:
236 case WLAN_CIPHER_SUITE_WEP104
:
237 ret
= iwl3945_set_wep_dynamic_key_info(priv
, keyconf
, sta_id
);
240 IWL_ERR(priv
, "Unknown alg: %s alg=%x\n", __func__
,
245 IWL_DEBUG_WEP(priv
, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
246 keyconf
->cipher
, keyconf
->keylen
, keyconf
->keyidx
,
252 static int iwl3945_remove_static_key(struct iwl_priv
*priv
)
254 int ret
= -EOPNOTSUPP
;
259 static int iwl3945_set_static_key(struct iwl_priv
*priv
,
260 struct ieee80211_key_conf
*key
)
262 if (key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
263 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
)
266 IWL_ERR(priv
, "Static key invalid: cipher %x\n", key
->cipher
);
270 static void iwl3945_clear_free_frames(struct iwl_priv
*priv
)
272 struct list_head
*element
;
274 IWL_DEBUG_INFO(priv
, "%d frames on pre-allocated heap on clear.\n",
277 while (!list_empty(&priv
->free_frames
)) {
278 element
= priv
->free_frames
.next
;
280 kfree(list_entry(element
, struct iwl3945_frame
, list
));
281 priv
->frames_count
--;
284 if (priv
->frames_count
) {
285 IWL_WARN(priv
, "%d frames still in use. Did we lose one?\n",
287 priv
->frames_count
= 0;
291 static struct iwl3945_frame
*iwl3945_get_free_frame(struct iwl_priv
*priv
)
293 struct iwl3945_frame
*frame
;
294 struct list_head
*element
;
295 if (list_empty(&priv
->free_frames
)) {
296 frame
= kzalloc(sizeof(*frame
), GFP_KERNEL
);
298 IWL_ERR(priv
, "Could not allocate frame!\n");
302 priv
->frames_count
++;
306 element
= priv
->free_frames
.next
;
308 return list_entry(element
, struct iwl3945_frame
, list
);
311 static void iwl3945_free_frame(struct iwl_priv
*priv
, struct iwl3945_frame
*frame
)
313 memset(frame
, 0, sizeof(*frame
));
314 list_add(&frame
->list
, &priv
->free_frames
);
317 unsigned int iwl3945_fill_beacon_frame(struct iwl_priv
*priv
,
318 struct ieee80211_hdr
*hdr
,
322 if (!iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
) || !priv
->beacon_skb
)
325 if (priv
->beacon_skb
->len
> left
)
328 memcpy(hdr
, priv
->beacon_skb
->data
, priv
->beacon_skb
->len
);
330 return priv
->beacon_skb
->len
;
333 static int iwl3945_send_beacon_cmd(struct iwl_priv
*priv
)
335 struct iwl3945_frame
*frame
;
336 unsigned int frame_size
;
340 frame
= iwl3945_get_free_frame(priv
);
343 IWL_ERR(priv
, "Could not obtain free frame buffer for beacon "
348 rate
= iwl_legacy_get_lowest_plcp(priv
,
349 &priv
->contexts
[IWL_RXON_CTX_BSS
]);
351 frame_size
= iwl3945_hw_get_beacon_cmd(priv
, frame
, rate
);
353 rc
= iwl_legacy_send_cmd_pdu(priv
, REPLY_TX_BEACON
, frame_size
,
356 iwl3945_free_frame(priv
, frame
);
361 static void iwl3945_unset_hw_params(struct iwl_priv
*priv
)
363 if (priv
->_3945
.shared_virt
)
364 dma_free_coherent(&priv
->pci_dev
->dev
,
365 sizeof(struct iwl3945_shared
),
366 priv
->_3945
.shared_virt
,
367 priv
->_3945
.shared_phys
);
370 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv
*priv
,
371 struct ieee80211_tx_info
*info
,
372 struct iwl_device_cmd
*cmd
,
373 struct sk_buff
*skb_frag
,
376 struct iwl3945_tx_cmd
*tx_cmd
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
377 struct iwl_hw_key
*keyinfo
= &priv
->stations
[sta_id
].keyinfo
;
381 switch (keyinfo
->cipher
) {
382 case WLAN_CIPHER_SUITE_CCMP
:
383 tx_cmd
->sec_ctl
= TX_CMD_SEC_CCM
;
384 memcpy(tx_cmd
->key
, keyinfo
->key
, keyinfo
->keylen
);
385 IWL_DEBUG_TX(priv
, "tx_cmd with AES hwcrypto\n");
388 case WLAN_CIPHER_SUITE_TKIP
:
391 case WLAN_CIPHER_SUITE_WEP104
:
392 tx_cmd
->sec_ctl
|= TX_CMD_SEC_KEY128
;
394 case WLAN_CIPHER_SUITE_WEP40
:
395 tx_cmd
->sec_ctl
|= TX_CMD_SEC_WEP
|
396 (info
->control
.hw_key
->hw_key_idx
& TX_CMD_SEC_MSK
) << TX_CMD_SEC_SHIFT
;
398 memcpy(&tx_cmd
->key
[3], keyinfo
->key
, keyinfo
->keylen
);
400 IWL_DEBUG_TX(priv
, "Configuring packet for WEP encryption "
401 "with key %d\n", info
->control
.hw_key
->hw_key_idx
);
405 IWL_ERR(priv
, "Unknown encode cipher %x\n", keyinfo
->cipher
);
411 * handle build REPLY_TX command notification.
413 static void iwl3945_build_tx_cmd_basic(struct iwl_priv
*priv
,
414 struct iwl_device_cmd
*cmd
,
415 struct ieee80211_tx_info
*info
,
416 struct ieee80211_hdr
*hdr
, u8 std_id
)
418 struct iwl3945_tx_cmd
*tx_cmd
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
419 __le32 tx_flags
= tx_cmd
->tx_flags
;
420 __le16 fc
= hdr
->frame_control
;
422 tx_cmd
->stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
423 if (!(info
->flags
& IEEE80211_TX_CTL_NO_ACK
)) {
424 tx_flags
|= TX_CMD_FLG_ACK_MSK
;
425 if (ieee80211_is_mgmt(fc
))
426 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
427 if (ieee80211_is_probe_resp(fc
) &&
428 !(le16_to_cpu(hdr
->seq_ctrl
) & 0xf))
429 tx_flags
|= TX_CMD_FLG_TSF_MSK
;
431 tx_flags
&= (~TX_CMD_FLG_ACK_MSK
);
432 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
435 tx_cmd
->sta_id
= std_id
;
436 if (ieee80211_has_morefrags(fc
))
437 tx_flags
|= TX_CMD_FLG_MORE_FRAG_MSK
;
439 if (ieee80211_is_data_qos(fc
)) {
440 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
441 tx_cmd
->tid_tspec
= qc
[0] & 0xf;
442 tx_flags
&= ~TX_CMD_FLG_SEQ_CTL_MSK
;
444 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
447 iwl_legacy_tx_cmd_protection(priv
, info
, fc
, &tx_flags
);
449 tx_flags
&= ~(TX_CMD_FLG_ANT_SEL_MSK
);
450 if (ieee80211_is_mgmt(fc
)) {
451 if (ieee80211_is_assoc_req(fc
) || ieee80211_is_reassoc_req(fc
))
452 tx_cmd
->timeout
.pm_frame_timeout
= cpu_to_le16(3);
454 tx_cmd
->timeout
.pm_frame_timeout
= cpu_to_le16(2);
456 tx_cmd
->timeout
.pm_frame_timeout
= 0;
459 tx_cmd
->driver_txop
= 0;
460 tx_cmd
->tx_flags
= tx_flags
;
461 tx_cmd
->next_frame_len
= 0;
465 * start REPLY_TX command process
467 static int iwl3945_tx_skb(struct iwl_priv
*priv
, struct sk_buff
*skb
)
469 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
470 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
471 struct iwl3945_tx_cmd
*tx_cmd
;
472 struct iwl_tx_queue
*txq
= NULL
;
473 struct iwl_queue
*q
= NULL
;
474 struct iwl_device_cmd
*out_cmd
;
475 struct iwl_cmd_meta
*out_meta
;
476 dma_addr_t phys_addr
;
477 dma_addr_t txcmd_phys
;
478 int txq_id
= skb_get_queue_mapping(skb
);
479 u16 len
, idx
, hdr_len
;
485 u8 wait_write_ptr
= 0;
488 spin_lock_irqsave(&priv
->lock
, flags
);
489 if (iwl_legacy_is_rfkill(priv
)) {
490 IWL_DEBUG_DROP(priv
, "Dropping - RF KILL\n");
494 if ((ieee80211_get_tx_rate(priv
->hw
, info
)->hw_value
& 0xFF) == IWL_INVALID_RATE
) {
495 IWL_ERR(priv
, "ERROR: No TX rate available.\n");
499 unicast
= !is_multicast_ether_addr(hdr
->addr1
);
502 fc
= hdr
->frame_control
;
504 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
505 if (ieee80211_is_auth(fc
))
506 IWL_DEBUG_TX(priv
, "Sending AUTH frame\n");
507 else if (ieee80211_is_assoc_req(fc
))
508 IWL_DEBUG_TX(priv
, "Sending ASSOC frame\n");
509 else if (ieee80211_is_reassoc_req(fc
))
510 IWL_DEBUG_TX(priv
, "Sending REASSOC frame\n");
513 spin_unlock_irqrestore(&priv
->lock
, flags
);
515 hdr_len
= ieee80211_hdrlen(fc
);
517 /* Find index into station table for destination station */
518 sta_id
= iwl_legacy_sta_id_or_broadcast(
519 priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
],
521 if (sta_id
== IWL_INVALID_STATION
) {
522 IWL_DEBUG_DROP(priv
, "Dropping - INVALID STATION: %pM\n",
527 IWL_DEBUG_RATE(priv
, "station Id %d\n", sta_id
);
529 if (ieee80211_is_data_qos(fc
)) {
530 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
531 tid
= qc
[0] & IEEE80211_QOS_CTL_TID_MASK
;
532 if (unlikely(tid
>= MAX_TID_COUNT
))
536 /* Descriptor for chosen Tx queue */
537 txq
= &priv
->txq
[txq_id
];
540 if ((iwl_legacy_queue_space(q
) < q
->high_mark
))
543 spin_lock_irqsave(&priv
->lock
, flags
);
545 idx
= iwl_legacy_get_cmd_index(q
, q
->write_ptr
, 0);
547 /* Set up driver data for this TFD */
548 memset(&(txq
->txb
[q
->write_ptr
]), 0, sizeof(struct iwl_tx_info
));
549 txq
->txb
[q
->write_ptr
].skb
= skb
;
550 txq
->txb
[q
->write_ptr
].ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
552 /* Init first empty entry in queue's array of Tx/cmd buffers */
553 out_cmd
= txq
->cmd
[idx
];
554 out_meta
= &txq
->meta
[idx
];
555 tx_cmd
= (struct iwl3945_tx_cmd
*)out_cmd
->cmd
.payload
;
556 memset(&out_cmd
->hdr
, 0, sizeof(out_cmd
->hdr
));
557 memset(tx_cmd
, 0, sizeof(*tx_cmd
));
560 * Set up the Tx-command (not MAC!) header.
561 * Store the chosen Tx queue and TFD index within the sequence field;
562 * after Tx, uCode's Tx response will return this value so driver can
563 * locate the frame within the tx queue and do post-tx processing.
565 out_cmd
->hdr
.cmd
= REPLY_TX
;
566 out_cmd
->hdr
.sequence
= cpu_to_le16((u16
)(QUEUE_TO_SEQ(txq_id
) |
567 INDEX_TO_SEQ(q
->write_ptr
)));
569 /* Copy MAC header from skb into command buffer */
570 memcpy(tx_cmd
->hdr
, hdr
, hdr_len
);
573 if (info
->control
.hw_key
)
574 iwl3945_build_tx_cmd_hwcrypto(priv
, info
, out_cmd
, skb
, sta_id
);
576 /* TODO need this for burst mode later on */
577 iwl3945_build_tx_cmd_basic(priv
, out_cmd
, info
, hdr
, sta_id
);
579 /* set is_hcca to 0; it probably will never be implemented */
580 iwl3945_hw_build_tx_cmd_rate(priv
, out_cmd
, info
, hdr
, sta_id
, 0);
582 /* Total # bytes to be transmitted */
584 tx_cmd
->len
= cpu_to_le16(len
);
586 iwl_legacy_dbg_log_tx_data_frame(priv
, len
, hdr
);
587 iwl_legacy_update_stats(priv
, true, fc
, len
);
588 tx_cmd
->tx_flags
&= ~TX_CMD_FLG_ANT_A_MSK
;
589 tx_cmd
->tx_flags
&= ~TX_CMD_FLG_ANT_B_MSK
;
591 if (!ieee80211_has_morefrags(hdr
->frame_control
)) {
592 txq
->need_update
= 1;
595 txq
->need_update
= 0;
598 IWL_DEBUG_TX(priv
, "sequence nr = 0X%x\n",
599 le16_to_cpu(out_cmd
->hdr
.sequence
));
600 IWL_DEBUG_TX(priv
, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd
->tx_flags
));
601 iwl_print_hex_dump(priv
, IWL_DL_TX
, tx_cmd
, sizeof(*tx_cmd
));
602 iwl_print_hex_dump(priv
, IWL_DL_TX
, (u8
*)tx_cmd
->hdr
,
603 ieee80211_hdrlen(fc
));
606 * Use the first empty entry in this queue's command buffer array
607 * to contain the Tx command and MAC header concatenated together
608 * (payload data will be in another buffer).
609 * Size of this varies, due to varying MAC header length.
610 * If end is not dword aligned, we'll have 2 extra bytes at the end
611 * of the MAC header (device reads on dword boundaries).
612 * We'll tell device about this padding later.
614 len
= sizeof(struct iwl3945_tx_cmd
) +
615 sizeof(struct iwl_cmd_header
) + hdr_len
;
616 len
= (len
+ 3) & ~3;
618 /* Physical address of this Tx command's header (not MAC header!),
619 * within command buffer array. */
620 txcmd_phys
= pci_map_single(priv
->pci_dev
, &out_cmd
->hdr
,
621 len
, PCI_DMA_TODEVICE
);
622 /* we do not map meta data ... so we can safely access address to
623 * provide to unmap command*/
624 dma_unmap_addr_set(out_meta
, mapping
, txcmd_phys
);
625 dma_unmap_len_set(out_meta
, len
, len
);
627 /* Add buffer containing Tx command and MAC(!) header to TFD's
629 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
630 txcmd_phys
, len
, 1, 0);
633 /* Set up TFD's 2nd entry to point directly to remainder of skb,
634 * if any (802.11 null frames have no payload). */
635 len
= skb
->len
- hdr_len
;
637 phys_addr
= pci_map_single(priv
->pci_dev
, skb
->data
+ hdr_len
,
638 len
, PCI_DMA_TODEVICE
);
639 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
645 /* Tell device the write index *just past* this latest filled TFD */
646 q
->write_ptr
= iwl_legacy_queue_inc_wrap(q
->write_ptr
, q
->n_bd
);
647 iwl_legacy_txq_update_write_ptr(priv
, txq
);
648 spin_unlock_irqrestore(&priv
->lock
, flags
);
650 if ((iwl_legacy_queue_space(q
) < q
->high_mark
)
651 && priv
->mac80211_registered
) {
652 if (wait_write_ptr
) {
653 spin_lock_irqsave(&priv
->lock
, flags
);
654 txq
->need_update
= 1;
655 iwl_legacy_txq_update_write_ptr(priv
, txq
);
656 spin_unlock_irqrestore(&priv
->lock
, flags
);
659 iwl_legacy_stop_queue(priv
, txq
);
665 spin_unlock_irqrestore(&priv
->lock
, flags
);
670 static int iwl3945_get_measurement(struct iwl_priv
*priv
,
671 struct ieee80211_measurement_params
*params
,
674 struct iwl_spectrum_cmd spectrum
;
675 struct iwl_rx_packet
*pkt
;
676 struct iwl_host_cmd cmd
= {
677 .id
= REPLY_SPECTRUM_MEASUREMENT_CMD
,
678 .data
= (void *)&spectrum
,
679 .flags
= CMD_WANT_SKB
,
681 u32 add_time
= le64_to_cpu(params
->start_time
);
683 int spectrum_resp_status
;
684 int duration
= le16_to_cpu(params
->duration
);
685 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
687 if (iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
))
688 add_time
= iwl_legacy_usecs_to_beacons(priv
,
689 le64_to_cpu(params
->start_time
) - priv
->_3945
.last_tsf
,
690 le16_to_cpu(ctx
->timing
.beacon_interval
));
692 memset(&spectrum
, 0, sizeof(spectrum
));
694 spectrum
.channel_count
= cpu_to_le16(1);
696 RXON_FLG_TSF2HOST_MSK
| RXON_FLG_ANT_A_MSK
| RXON_FLG_DIS_DIV_MSK
;
697 spectrum
.filter_flags
= MEASUREMENT_FILTER_FLAG
;
698 cmd
.len
= sizeof(spectrum
);
699 spectrum
.len
= cpu_to_le16(cmd
.len
- sizeof(spectrum
.len
));
701 if (iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
))
702 spectrum
.start_time
=
703 iwl_legacy_add_beacon_time(priv
,
704 priv
->_3945
.last_beacon_time
, add_time
,
705 le16_to_cpu(ctx
->timing
.beacon_interval
));
707 spectrum
.start_time
= 0;
709 spectrum
.channels
[0].duration
= cpu_to_le32(duration
* TIME_UNIT
);
710 spectrum
.channels
[0].channel
= params
->channel
;
711 spectrum
.channels
[0].type
= type
;
712 if (ctx
->active
.flags
& RXON_FLG_BAND_24G_MSK
)
713 spectrum
.flags
|= RXON_FLG_BAND_24G_MSK
|
714 RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_TGG_PROTECT_MSK
;
716 rc
= iwl_legacy_send_cmd_sync(priv
, &cmd
);
720 pkt
= (struct iwl_rx_packet
*)cmd
.reply_page
;
721 if (pkt
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
722 IWL_ERR(priv
, "Bad return from REPLY_RX_ON_ASSOC command\n");
726 spectrum_resp_status
= le16_to_cpu(pkt
->u
.spectrum
.status
);
727 switch (spectrum_resp_status
) {
728 case 0: /* Command will be handled */
729 if (pkt
->u
.spectrum
.id
!= 0xff) {
730 IWL_DEBUG_INFO(priv
, "Replaced existing measurement: %d\n",
732 priv
->measurement_status
&= ~MEASUREMENT_READY
;
734 priv
->measurement_status
|= MEASUREMENT_ACTIVE
;
738 case 1: /* Command will not be handled */
743 iwl_legacy_free_pages(priv
, cmd
.reply_page
);
748 static void iwl3945_rx_reply_alive(struct iwl_priv
*priv
,
749 struct iwl_rx_mem_buffer
*rxb
)
751 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
752 struct iwl_alive_resp
*palive
;
753 struct delayed_work
*pwork
;
755 palive
= &pkt
->u
.alive_frame
;
757 IWL_DEBUG_INFO(priv
, "Alive ucode status 0x%08X revision "
759 palive
->is_valid
, palive
->ver_type
,
760 palive
->ver_subtype
);
762 if (palive
->ver_subtype
== INITIALIZE_SUBTYPE
) {
763 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
764 memcpy(&priv
->card_alive_init
, &pkt
->u
.alive_frame
,
765 sizeof(struct iwl_alive_resp
));
766 pwork
= &priv
->init_alive_start
;
768 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
769 memcpy(&priv
->card_alive
, &pkt
->u
.alive_frame
,
770 sizeof(struct iwl_alive_resp
));
771 pwork
= &priv
->alive_start
;
772 iwl3945_disable_events(priv
);
775 /* We delay the ALIVE response by 5ms to
776 * give the HW RF Kill time to activate... */
777 if (palive
->is_valid
== UCODE_VALID_OK
)
778 queue_delayed_work(priv
->workqueue
, pwork
,
779 msecs_to_jiffies(5));
781 IWL_WARN(priv
, "uCode did not respond OK.\n");
784 static void iwl3945_rx_reply_add_sta(struct iwl_priv
*priv
,
785 struct iwl_rx_mem_buffer
*rxb
)
787 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
788 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
791 IWL_DEBUG_RX(priv
, "Received REPLY_ADD_STA: 0x%02X\n", pkt
->u
.status
);
794 static void iwl3945_rx_beacon_notif(struct iwl_priv
*priv
,
795 struct iwl_rx_mem_buffer
*rxb
)
797 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
798 struct iwl3945_beacon_notif
*beacon
= &(pkt
->u
.beacon_status
);
799 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
800 u8 rate
= beacon
->beacon_notify_hdr
.rate
;
802 IWL_DEBUG_RX(priv
, "beacon status %x retries %d iss %d "
803 "tsf %d %d rate %d\n",
804 le32_to_cpu(beacon
->beacon_notify_hdr
.status
) & TX_STATUS_MSK
,
805 beacon
->beacon_notify_hdr
.failure_frame
,
806 le32_to_cpu(beacon
->ibss_mgr_status
),
807 le32_to_cpu(beacon
->high_tsf
),
808 le32_to_cpu(beacon
->low_tsf
), rate
);
811 priv
->ibss_manager
= le32_to_cpu(beacon
->ibss_mgr_status
);
815 /* Handle notification from uCode that card's power state is changing
816 * due to software, hardware, or critical temperature RFKILL */
817 static void iwl3945_rx_card_state_notif(struct iwl_priv
*priv
,
818 struct iwl_rx_mem_buffer
*rxb
)
820 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
821 u32 flags
= le32_to_cpu(pkt
->u
.card_state_notif
.flags
);
822 unsigned long status
= priv
->status
;
824 IWL_WARN(priv
, "Card state received: HW:%s SW:%s\n",
825 (flags
& HW_CARD_DISABLED
) ? "Kill" : "On",
826 (flags
& SW_CARD_DISABLED
) ? "Kill" : "On");
828 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
829 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
831 if (flags
& HW_CARD_DISABLED
)
832 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
834 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
837 iwl_legacy_scan_cancel(priv
);
839 if ((test_bit(STATUS_RF_KILL_HW
, &status
) !=
840 test_bit(STATUS_RF_KILL_HW
, &priv
->status
)))
841 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
842 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
844 wake_up_interruptible(&priv
->wait_command_queue
);
848 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
850 * Setup the RX handlers for each of the reply types sent from the uCode
853 * This function chains into the hardware specific files for them to setup
854 * any hardware specific handlers as well.
856 static void iwl3945_setup_rx_handlers(struct iwl_priv
*priv
)
858 priv
->rx_handlers
[REPLY_ALIVE
] = iwl3945_rx_reply_alive
;
859 priv
->rx_handlers
[REPLY_ADD_STA
] = iwl3945_rx_reply_add_sta
;
860 priv
->rx_handlers
[REPLY_ERROR
] = iwl_legacy_rx_reply_error
;
861 priv
->rx_handlers
[CHANNEL_SWITCH_NOTIFICATION
] = iwl_legacy_rx_csa
;
862 priv
->rx_handlers
[SPECTRUM_MEASURE_NOTIFICATION
] =
863 iwl_legacy_rx_spectrum_measure_notif
;
864 priv
->rx_handlers
[PM_SLEEP_NOTIFICATION
] = iwl_legacy_rx_pm_sleep_notif
;
865 priv
->rx_handlers
[PM_DEBUG_STATISTIC_NOTIFIC
] =
866 iwl_legacy_rx_pm_debug_statistics_notif
;
867 priv
->rx_handlers
[BEACON_NOTIFICATION
] = iwl3945_rx_beacon_notif
;
870 * The same handler is used for both the REPLY to a discrete
871 * statistics request from the host as well as for the periodic
872 * statistics notifications (after received beacons) from the uCode.
874 priv
->rx_handlers
[REPLY_STATISTICS_CMD
] = iwl3945_reply_statistics
;
875 priv
->rx_handlers
[STATISTICS_NOTIFICATION
] = iwl3945_hw_rx_statistics
;
877 iwl_legacy_setup_rx_scan_handlers(priv
);
878 priv
->rx_handlers
[CARD_STATE_NOTIFICATION
] = iwl3945_rx_card_state_notif
;
880 /* Set up hardware specific Rx handlers */
881 iwl3945_hw_rx_handler_setup(priv
);
884 /************************** RX-FUNCTIONS ****************************/
886 * Rx theory of operation
888 * The host allocates 32 DMA target addresses and passes the host address
889 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
893 * The host/firmware share two index registers for managing the Rx buffers.
895 * The READ index maps to the first position that the firmware may be writing
896 * to -- the driver can read up to (but not including) this position and get
898 * The READ index is managed by the firmware once the card is enabled.
900 * The WRITE index maps to the last position the driver has read from -- the
901 * position preceding WRITE is the last slot the firmware can place a packet.
903 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
906 * During initialization, the host sets up the READ queue position to the first
907 * INDEX position, and WRITE to the last (READ - 1 wrapped)
909 * When the firmware places a packet in a buffer, it will advance the READ index
910 * and fire the RX interrupt. The driver can then query the READ index and
911 * process as many packets as possible, moving the WRITE index forward as it
912 * resets the Rx queue buffers with new memory.
914 * The management in the driver is as follows:
915 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
916 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
917 * to replenish the iwl->rxq->rx_free.
918 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
919 * iwl->rxq is replenished and the READ INDEX is updated (updating the
920 * 'processed' and 'read' driver indexes as well)
921 * + A received packet is processed and handed to the kernel network stack,
922 * detached from the iwl->rxq. The driver 'processed' index is updated.
923 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
924 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
925 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
926 * were enough free buffers and RX_STALLED is set it is cleared.
931 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
932 * iwl3945_rx_queue_restock
933 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
934 * queue, updates firmware pointers, and updates
935 * the WRITE index. If insufficient rx_free buffers
936 * are available, schedules iwl3945_rx_replenish
938 * -- enable interrupts --
939 * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
940 * READ INDEX, detaching the SKB from the pool.
941 * Moves the packet buffer from queue to rx_used.
942 * Calls iwl3945_rx_queue_restock to refill any empty
949 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
951 static inline __le32
iwl3945_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
954 return cpu_to_le32((u32
)dma_addr
);
958 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
960 * If there are slots in the RX queue that need to be restocked,
961 * and we have free pre-allocated buffers, fill the ranks as much
962 * as we can, pulling from rx_free.
964 * This moves the 'write' index forward to catch up with 'processed', and
965 * also updates the memory address in the firmware to reference the new
968 static void iwl3945_rx_queue_restock(struct iwl_priv
*priv
)
970 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
971 struct list_head
*element
;
972 struct iwl_rx_mem_buffer
*rxb
;
976 spin_lock_irqsave(&rxq
->lock
, flags
);
977 write
= rxq
->write
& ~0x7;
978 while ((iwl_legacy_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
979 /* Get next free Rx buffer, remove from free list */
980 element
= rxq
->rx_free
.next
;
981 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
984 /* Point to Rx buffer via next RBD in circular buffer */
985 rxq
->bd
[rxq
->write
] = iwl3945_dma_addr2rbd_ptr(priv
, rxb
->page_dma
);
986 rxq
->queue
[rxq
->write
] = rxb
;
987 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
990 spin_unlock_irqrestore(&rxq
->lock
, flags
);
991 /* If the pre-allocated buffer pool is dropping low, schedule to
993 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
994 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
997 /* If we've added more space for the firmware to place data, tell it.
998 * Increment device's write pointer in multiples of 8. */
999 if ((rxq
->write_actual
!= (rxq
->write
& ~0x7))
1000 || (abs(rxq
->write
- rxq
->read
) > 7)) {
1001 spin_lock_irqsave(&rxq
->lock
, flags
);
1002 rxq
->need_update
= 1;
1003 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1004 iwl_legacy_rx_queue_update_write_ptr(priv
, rxq
);
1009 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
1011 * When moving to rx_free an SKB is allocated for the slot.
1013 * Also restock the Rx queue via iwl3945_rx_queue_restock.
1014 * This is called as a scheduled work item (except for during initialization)
1016 static void iwl3945_rx_allocate(struct iwl_priv
*priv
, gfp_t priority
)
1018 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1019 struct list_head
*element
;
1020 struct iwl_rx_mem_buffer
*rxb
;
1022 unsigned long flags
;
1023 gfp_t gfp_mask
= priority
;
1026 spin_lock_irqsave(&rxq
->lock
, flags
);
1028 if (list_empty(&rxq
->rx_used
)) {
1029 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1032 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1034 if (rxq
->free_count
> RX_LOW_WATERMARK
)
1035 gfp_mask
|= __GFP_NOWARN
;
1037 if (priv
->hw_params
.rx_page_order
> 0)
1038 gfp_mask
|= __GFP_COMP
;
1040 /* Alloc a new receive buffer */
1041 page
= alloc_pages(gfp_mask
, priv
->hw_params
.rx_page_order
);
1043 if (net_ratelimit())
1044 IWL_DEBUG_INFO(priv
, "Failed to allocate SKB buffer.\n");
1045 if ((rxq
->free_count
<= RX_LOW_WATERMARK
) &&
1047 IWL_CRIT(priv
, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
1048 priority
== GFP_ATOMIC
? "GFP_ATOMIC" : "GFP_KERNEL",
1050 /* We don't reschedule replenish work here -- we will
1051 * call the restock method and if it still needs
1052 * more buffers it will schedule replenish */
1056 spin_lock_irqsave(&rxq
->lock
, flags
);
1057 if (list_empty(&rxq
->rx_used
)) {
1058 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1059 __free_pages(page
, priv
->hw_params
.rx_page_order
);
1062 element
= rxq
->rx_used
.next
;
1063 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
1065 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1068 /* Get physical address of RB/SKB */
1069 rxb
->page_dma
= pci_map_page(priv
->pci_dev
, page
, 0,
1070 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1071 PCI_DMA_FROMDEVICE
);
1073 spin_lock_irqsave(&rxq
->lock
, flags
);
1075 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
1077 priv
->alloc_rxb_page
++;
1079 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1083 void iwl3945_rx_queue_reset(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1085 unsigned long flags
;
1087 spin_lock_irqsave(&rxq
->lock
, flags
);
1088 INIT_LIST_HEAD(&rxq
->rx_free
);
1089 INIT_LIST_HEAD(&rxq
->rx_used
);
1090 /* Fill the rx_used queue with _all_ of the Rx buffers */
1091 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
1092 /* In the reset function, these buffers may have been allocated
1093 * to an SKB, so we need to unmap and free potential storage */
1094 if (rxq
->pool
[i
].page
!= NULL
) {
1095 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
1096 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1097 PCI_DMA_FROMDEVICE
);
1098 __iwl_legacy_free_pages(priv
, rxq
->pool
[i
].page
);
1099 rxq
->pool
[i
].page
= NULL
;
1101 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
1104 /* Set us so that we have processed and used all buffers, but have
1105 * not restocked the Rx queue with fresh buffers */
1106 rxq
->read
= rxq
->write
= 0;
1107 rxq
->write_actual
= 0;
1108 rxq
->free_count
= 0;
1109 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1112 void iwl3945_rx_replenish(void *data
)
1114 struct iwl_priv
*priv
= data
;
1115 unsigned long flags
;
1117 iwl3945_rx_allocate(priv
, GFP_KERNEL
);
1119 spin_lock_irqsave(&priv
->lock
, flags
);
1120 iwl3945_rx_queue_restock(priv
);
1121 spin_unlock_irqrestore(&priv
->lock
, flags
);
1124 static void iwl3945_rx_replenish_now(struct iwl_priv
*priv
)
1126 iwl3945_rx_allocate(priv
, GFP_ATOMIC
);
1128 iwl3945_rx_queue_restock(priv
);
1132 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1133 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1134 * This free routine walks the list of POOL entries and if SKB is set to
1135 * non NULL it is unmapped and freed
1137 static void iwl3945_rx_queue_free(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1140 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
1141 if (rxq
->pool
[i
].page
!= NULL
) {
1142 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
1143 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1144 PCI_DMA_FROMDEVICE
);
1145 __iwl_legacy_free_pages(priv
, rxq
->pool
[i
].page
);
1146 rxq
->pool
[i
].page
= NULL
;
1150 dma_free_coherent(&priv
->pci_dev
->dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
1152 dma_free_coherent(&priv
->pci_dev
->dev
, sizeof(struct iwl_rb_status
),
1153 rxq
->rb_stts
, rxq
->rb_stts_dma
);
1155 rxq
->rb_stts
= NULL
;
1159 /* Convert linear signal-to-noise ratio into dB */
1160 static u8 ratio2dB
[100] = {
1161 /* 0 1 2 3 4 5 6 7 8 9 */
1162 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1163 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1164 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1165 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1166 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1167 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1168 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1169 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1170 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1171 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1174 /* Calculates a relative dB value from a ratio of linear
1175 * (i.e. not dB) signal levels.
1176 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1177 int iwl3945_calc_db_from_ratio(int sig_ratio
)
1179 /* 1000:1 or higher just report as 60 dB */
1180 if (sig_ratio
>= 1000)
1183 /* 100:1 or higher, divide by 10 and use table,
1184 * add 20 dB to make up for divide by 10 */
1185 if (sig_ratio
>= 100)
1186 return 20 + (int)ratio2dB
[sig_ratio
/10];
1188 /* We shouldn't see this */
1192 /* Use table for ratios 1:1 - 99:1 */
1193 return (int)ratio2dB
[sig_ratio
];
1197 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
1199 * Uses the priv->rx_handlers callback function array to invoke
1200 * the appropriate handlers, including command responses,
1201 * frame-received notifications, and other notifications.
1203 static void iwl3945_rx_handle(struct iwl_priv
*priv
)
1205 struct iwl_rx_mem_buffer
*rxb
;
1206 struct iwl_rx_packet
*pkt
;
1207 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1210 unsigned long flags
;
1213 int total_empty
= 0;
1215 /* uCode's read index (stored in shared DRAM) indicates the last Rx
1216 * buffer that the driver may process (last buffer filled by ucode). */
1217 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
1220 /* calculate total frames need to be restock after handling RX */
1221 total_empty
= r
- rxq
->write_actual
;
1222 if (total_empty
< 0)
1223 total_empty
+= RX_QUEUE_SIZE
;
1225 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
1227 /* Rx interrupt, but nothing sent from uCode */
1229 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
1234 rxb
= rxq
->queue
[i
];
1236 /* If an RXB doesn't have a Rx queue slot associated with it,
1237 * then a bug has been introduced in the queue refilling
1238 * routines -- catch it here */
1239 BUG_ON(rxb
== NULL
);
1241 rxq
->queue
[i
] = NULL
;
1243 pci_unmap_page(priv
->pci_dev
, rxb
->page_dma
,
1244 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1245 PCI_DMA_FROMDEVICE
);
1246 pkt
= rxb_addr(rxb
);
1248 len
= le32_to_cpu(pkt
->len_n_flags
) & FH_RSCSR_FRAME_SIZE_MSK
;
1249 len
+= sizeof(u32
); /* account for status word */
1250 trace_iwlwifi_legacy_dev_rx(priv
, pkt
, len
);
1252 /* Reclaim a command buffer only if this packet is a response
1253 * to a (driver-originated) command.
1254 * If the packet (e.g. Rx frame) originated from uCode,
1255 * there is no command buffer to reclaim.
1256 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
1257 * but apparently a few don't get set; catch them here. */
1258 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
1259 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
1260 (pkt
->hdr
.cmd
!= REPLY_TX
);
1262 /* Based on type of command response or notification,
1263 * handle those that need handling via function in
1264 * rx_handlers table. See iwl3945_setup_rx_handlers() */
1265 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
1266 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
, i
,
1267 iwl_legacy_get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
1268 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
1269 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
1271 /* No handling needed */
1273 "r %d i %d No handler needed for %s, 0x%02x\n",
1274 r
, i
, iwl_legacy_get_cmd_string(pkt
->hdr
.cmd
),
1279 * XXX: After here, we should always check rxb->page
1280 * against NULL before touching it or its virtual
1281 * memory (pkt). Because some rx_handler might have
1282 * already taken or freed the pages.
1286 /* Invoke any callbacks, transfer the buffer to caller,
1287 * and fire off the (possibly) blocking iwl_legacy_send_cmd()
1288 * as we reclaim the driver command queue */
1290 iwl_legacy_tx_cmd_complete(priv
, rxb
);
1292 IWL_WARN(priv
, "Claim null rxb?\n");
1295 /* Reuse the page if possible. For notification packets and
1296 * SKBs that fail to Rx correctly, add them back into the
1297 * rx_free list for reuse later. */
1298 spin_lock_irqsave(&rxq
->lock
, flags
);
1299 if (rxb
->page
!= NULL
) {
1300 rxb
->page_dma
= pci_map_page(priv
->pci_dev
, rxb
->page
,
1301 0, PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
1302 PCI_DMA_FROMDEVICE
);
1303 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
1306 list_add_tail(&rxb
->list
, &rxq
->rx_used
);
1308 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1310 i
= (i
+ 1) & RX_QUEUE_MASK
;
1311 /* If there are a lot of unused frames,
1312 * restock the Rx queue so ucode won't assert. */
1317 iwl3945_rx_replenish_now(priv
);
1323 /* Backtrack one entry */
1326 iwl3945_rx_replenish_now(priv
);
1328 iwl3945_rx_queue_restock(priv
);
1331 /* call this function to flush any scheduled tasklet */
1332 static inline void iwl3945_synchronize_irq(struct iwl_priv
*priv
)
1334 /* wait to make sure we flush pending tasklet*/
1335 synchronize_irq(priv
->pci_dev
->irq
);
1336 tasklet_kill(&priv
->irq_tasklet
);
1339 static const char *iwl3945_desc_lookup(int i
)
1347 return "BAD_CHECKSUM";
1349 return "NMI_INTERRUPT";
1353 return "FATAL_ERROR";
1359 #define ERROR_START_OFFSET (1 * sizeof(u32))
1360 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1362 void iwl3945_dump_nic_error_log(struct iwl_priv
*priv
)
1365 u32 desc
, time
, count
, base
, data1
;
1366 u32 blink1
, blink2
, ilink1
, ilink2
;
1368 base
= le32_to_cpu(priv
->card_alive
.error_event_table_ptr
);
1370 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1371 IWL_ERR(priv
, "Not valid error log pointer 0x%08X\n", base
);
1376 count
= iwl_legacy_read_targ_mem(priv
, base
);
1378 if (ERROR_START_OFFSET
<= count
* ERROR_ELEM_SIZE
) {
1379 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1380 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1381 priv
->status
, count
);
1384 IWL_ERR(priv
, "Desc Time asrtPC blink2 "
1385 "ilink1 nmiPC Line\n");
1386 for (i
= ERROR_START_OFFSET
;
1387 i
< (count
* ERROR_ELEM_SIZE
) + ERROR_START_OFFSET
;
1388 i
+= ERROR_ELEM_SIZE
) {
1389 desc
= iwl_legacy_read_targ_mem(priv
, base
+ i
);
1391 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 1 * sizeof(u32
));
1393 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 2 * sizeof(u32
));
1395 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 3 * sizeof(u32
));
1397 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 4 * sizeof(u32
));
1399 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 5 * sizeof(u32
));
1401 iwl_legacy_read_targ_mem(priv
, base
+ i
+ 6 * sizeof(u32
));
1404 "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1405 iwl3945_desc_lookup(desc
), desc
, time
, blink1
, blink2
,
1406 ilink1
, ilink2
, data1
);
1407 trace_iwlwifi_legacy_dev_ucode_error(priv
, desc
, time
, data1
, 0,
1408 0, blink1
, blink2
, ilink1
, ilink2
);
1412 #define EVENT_START_OFFSET (6 * sizeof(u32))
1415 * iwl3945_print_event_log - Dump error event log to syslog
1418 static int iwl3945_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1419 u32 num_events
, u32 mode
,
1420 int pos
, char **buf
, size_t bufsz
)
1423 u32 base
; /* SRAM byte address of event log header */
1424 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1425 u32 ptr
; /* SRAM byte address of log data */
1426 u32 ev
, time
, data
; /* event log data */
1427 unsigned long reg_flags
;
1429 if (num_events
== 0)
1432 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1435 event_size
= 2 * sizeof(u32
);
1437 event_size
= 3 * sizeof(u32
);
1439 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1441 /* Make sure device is powered up for SRAM reads */
1442 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
1443 iwl_grab_nic_access(priv
);
1445 /* Set starting address; reads will auto-increment */
1446 _iwl_legacy_write_direct32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
1449 /* "time" is actually "data" for mode 0 (no timestamp).
1450 * place event id # at far right for easier visual parsing. */
1451 for (i
= 0; i
< num_events
; i
++) {
1452 ev
= _iwl_legacy_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1453 time
= _iwl_legacy_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1457 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1461 IWL_ERR(priv
, "0x%08x\t%04u\n", time
, ev
);
1462 trace_iwlwifi_legacy_dev_ucode_event(priv
, 0,
1466 data
= _iwl_legacy_read_direct32(priv
,
1467 HBUS_TARG_MEM_RDAT
);
1469 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1470 "%010u:0x%08x:%04u\n",
1473 IWL_ERR(priv
, "%010u\t0x%08x\t%04u\n",
1475 trace_iwlwifi_legacy_dev_ucode_event(priv
, time
,
1481 /* Allow device to power down */
1482 iwl_release_nic_access(priv
);
1483 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
1488 * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
1490 static int iwl3945_print_last_event_logs(struct iwl_priv
*priv
, u32 capacity
,
1491 u32 num_wraps
, u32 next_entry
,
1493 int pos
, char **buf
, size_t bufsz
)
1496 * display the newest DEFAULT_LOG_ENTRIES entries
1497 * i.e the entries just before the next ont that uCode would fill.
1500 if (next_entry
< size
) {
1501 pos
= iwl3945_print_event_log(priv
,
1502 capacity
- (size
- next_entry
),
1503 size
- next_entry
, mode
,
1505 pos
= iwl3945_print_event_log(priv
, 0,
1509 pos
= iwl3945_print_event_log(priv
, next_entry
- size
,
1513 if (next_entry
< size
)
1514 pos
= iwl3945_print_event_log(priv
, 0,
1518 pos
= iwl3945_print_event_log(priv
, next_entry
- size
,
1525 #define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
1527 int iwl3945_dump_nic_event_log(struct iwl_priv
*priv
, bool full_log
,
1528 char **buf
, bool display
)
1530 u32 base
; /* SRAM byte address of event log header */
1531 u32 capacity
; /* event log capacity in # entries */
1532 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1533 u32 num_wraps
; /* # times uCode wrapped to top of log */
1534 u32 next_entry
; /* index of next entry to be written by uCode */
1535 u32 size
; /* # entries that we'll print */
1539 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1540 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1541 IWL_ERR(priv
, "Invalid event log pointer 0x%08X\n", base
);
1545 /* event log header */
1546 capacity
= iwl_legacy_read_targ_mem(priv
, base
);
1547 mode
= iwl_legacy_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1548 num_wraps
= iwl_legacy_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1549 next_entry
= iwl_legacy_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1551 if (capacity
> priv
->cfg
->base_params
->max_event_log_size
) {
1552 IWL_ERR(priv
, "Log capacity %d is bogus, limit to %d entries\n",
1553 capacity
, priv
->cfg
->base_params
->max_event_log_size
);
1554 capacity
= priv
->cfg
->base_params
->max_event_log_size
;
1557 if (next_entry
> priv
->cfg
->base_params
->max_event_log_size
) {
1558 IWL_ERR(priv
, "Log write index %d is bogus, limit to %d\n",
1559 next_entry
, priv
->cfg
->base_params
->max_event_log_size
);
1560 next_entry
= priv
->cfg
->base_params
->max_event_log_size
;
1563 size
= num_wraps
? capacity
: next_entry
;
1565 /* bail out if nothing in log */
1567 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1571 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1572 if (!(iwl_legacy_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) && !full_log
)
1573 size
= (size
> DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES
)
1574 ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES
: size
;
1576 size
= (size
> DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES
)
1577 ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES
: size
;
1580 IWL_ERR(priv
, "Start IWL Event Log Dump: display last %d count\n",
1583 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1586 bufsz
= capacity
* 48;
1589 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1593 if ((iwl_legacy_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) || full_log
) {
1594 /* if uCode has wrapped back to top of log,
1595 * start at the oldest entry,
1596 * i.e the next one that uCode would fill.
1599 pos
= iwl3945_print_event_log(priv
, next_entry
,
1600 capacity
- next_entry
, mode
,
1603 /* (then/else) start at top of log */
1604 pos
= iwl3945_print_event_log(priv
, 0, next_entry
, mode
,
1607 pos
= iwl3945_print_last_event_logs(priv
, capacity
, num_wraps
,
1608 next_entry
, size
, mode
,
1611 pos
= iwl3945_print_last_event_logs(priv
, capacity
, num_wraps
,
1612 next_entry
, size
, mode
,
1618 static void iwl3945_irq_tasklet(struct iwl_priv
*priv
)
1620 u32 inta
, handled
= 0;
1622 unsigned long flags
;
1623 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1627 spin_lock_irqsave(&priv
->lock
, flags
);
1629 /* Ack/clear/reset pending uCode interrupts.
1630 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1631 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1632 inta
= iwl_read32(priv
, CSR_INT
);
1633 iwl_write32(priv
, CSR_INT
, inta
);
1635 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1636 * Any new interrupts that happen after this, either while we're
1637 * in this tasklet, or later, will show up in next ISR/tasklet. */
1638 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1639 iwl_write32(priv
, CSR_FH_INT_STATUS
, inta_fh
);
1641 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1642 if (iwl_legacy_get_debug_level(priv
) & IWL_DL_ISR
) {
1643 /* just for debug */
1644 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1645 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1646 inta
, inta_mask
, inta_fh
);
1650 spin_unlock_irqrestore(&priv
->lock
, flags
);
1652 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1653 * atomic, make sure that inta covers all the interrupts that
1654 * we've discovered, even if FH interrupt came in just after
1655 * reading CSR_INT. */
1656 if (inta_fh
& CSR39_FH_INT_RX_MASK
)
1657 inta
|= CSR_INT_BIT_FH_RX
;
1658 if (inta_fh
& CSR39_FH_INT_TX_MASK
)
1659 inta
|= CSR_INT_BIT_FH_TX
;
1661 /* Now service all interrupt bits discovered above. */
1662 if (inta
& CSR_INT_BIT_HW_ERR
) {
1663 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
1665 /* Tell the device to stop sending interrupts */
1666 iwl_legacy_disable_interrupts(priv
);
1668 priv
->isr_stats
.hw
++;
1669 iwl_legacy_irq_handle_error(priv
);
1671 handled
|= CSR_INT_BIT_HW_ERR
;
1676 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1677 if (iwl_legacy_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1678 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1679 if (inta
& CSR_INT_BIT_SCD
) {
1680 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
1681 "the frame/frames.\n");
1682 priv
->isr_stats
.sch
++;
1685 /* Alive notification via Rx interrupt will do the real work */
1686 if (inta
& CSR_INT_BIT_ALIVE
) {
1687 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
1688 priv
->isr_stats
.alive
++;
1692 /* Safely ignore these bits for debug checks below */
1693 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
1695 /* Error detected by uCode */
1696 if (inta
& CSR_INT_BIT_SW_ERR
) {
1697 IWL_ERR(priv
, "Microcode SW error detected. "
1698 "Restarting 0x%X.\n", inta
);
1699 priv
->isr_stats
.sw
++;
1700 iwl_legacy_irq_handle_error(priv
);
1701 handled
|= CSR_INT_BIT_SW_ERR
;
1704 /* uCode wakes up after power-down sleep */
1705 if (inta
& CSR_INT_BIT_WAKEUP
) {
1706 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
1707 iwl_legacy_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
1708 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[0]);
1709 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[1]);
1710 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[2]);
1711 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[3]);
1712 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[4]);
1713 iwl_legacy_txq_update_write_ptr(priv
, &priv
->txq
[5]);
1715 priv
->isr_stats
.wakeup
++;
1716 handled
|= CSR_INT_BIT_WAKEUP
;
1719 /* All uCode command responses, including Tx command responses,
1720 * Rx "responses" (frame-received notification), and other
1721 * notifications from uCode come through here*/
1722 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
1723 iwl3945_rx_handle(priv
);
1724 priv
->isr_stats
.rx
++;
1725 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
1728 if (inta
& CSR_INT_BIT_FH_TX
) {
1729 IWL_DEBUG_ISR(priv
, "Tx interrupt\n");
1730 priv
->isr_stats
.tx
++;
1732 iwl_write32(priv
, CSR_FH_INT_STATUS
, (1 << 6));
1733 iwl_legacy_write_direct32(priv
, FH39_TCSR_CREDIT
1734 (FH39_SRVC_CHNL
), 0x0);
1735 handled
|= CSR_INT_BIT_FH_TX
;
1738 if (inta
& ~handled
) {
1739 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
1740 priv
->isr_stats
.unhandled
++;
1743 if (inta
& ~priv
->inta_mask
) {
1744 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
1745 inta
& ~priv
->inta_mask
);
1746 IWL_WARN(priv
, " with FH_INT = 0x%08x\n", inta_fh
);
1749 /* Re-enable all interrupts */
1750 /* only Re-enable if disabled by irq */
1751 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
1752 iwl_legacy_enable_interrupts(priv
);
1754 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
1755 if (iwl_legacy_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1756 inta
= iwl_read32(priv
, CSR_INT
);
1757 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1758 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1759 IWL_DEBUG_ISR(priv
, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1760 "flags 0x%08lx\n", inta
, inta_mask
, inta_fh
, flags
);
1765 static int iwl3945_get_single_channel_for_scan(struct iwl_priv
*priv
,
1766 struct ieee80211_vif
*vif
,
1767 enum ieee80211_band band
,
1768 struct iwl3945_scan_channel
*scan_ch
)
1770 const struct ieee80211_supported_band
*sband
;
1771 u16 passive_dwell
= 0;
1772 u16 active_dwell
= 0;
1776 sband
= iwl_get_hw_mode(priv
, band
);
1778 IWL_ERR(priv
, "invalid band\n");
1782 active_dwell
= iwl_legacy_get_active_dwell_time(priv
, band
, 0);
1783 passive_dwell
= iwl_legacy_get_passive_dwell_time(priv
, band
, vif
);
1785 if (passive_dwell
<= active_dwell
)
1786 passive_dwell
= active_dwell
+ 1;
1789 channel
= iwl_legacy_get_single_channel_number(priv
, band
);
1792 scan_ch
->channel
= channel
;
1793 scan_ch
->type
= 0; /* passive */
1794 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1795 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1796 /* Set txpower levels to defaults */
1797 scan_ch
->tpc
.dsp_atten
= 110;
1798 if (band
== IEEE80211_BAND_5GHZ
)
1799 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1801 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
1804 IWL_ERR(priv
, "no valid channel found\n");
1808 static int iwl3945_get_channels_for_scan(struct iwl_priv
*priv
,
1809 enum ieee80211_band band
,
1810 u8 is_active
, u8 n_probes
,
1811 struct iwl3945_scan_channel
*scan_ch
,
1812 struct ieee80211_vif
*vif
)
1814 struct ieee80211_channel
*chan
;
1815 const struct ieee80211_supported_band
*sband
;
1816 const struct iwl_channel_info
*ch_info
;
1817 u16 passive_dwell
= 0;
1818 u16 active_dwell
= 0;
1821 sband
= iwl_get_hw_mode(priv
, band
);
1825 active_dwell
= iwl_legacy_get_active_dwell_time(priv
, band
, n_probes
);
1826 passive_dwell
= iwl_legacy_get_passive_dwell_time(priv
, band
, vif
);
1828 if (passive_dwell
<= active_dwell
)
1829 passive_dwell
= active_dwell
+ 1;
1831 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
1832 chan
= priv
->scan_request
->channels
[i
];
1834 if (chan
->band
!= band
)
1837 scan_ch
->channel
= chan
->hw_value
;
1839 ch_info
= iwl_legacy_get_channel_info(priv
, band
,
1841 if (!iwl_legacy_is_channel_valid(ch_info
)) {
1842 IWL_DEBUG_SCAN(priv
,
1843 "Channel %d is INVALID for this band.\n",
1848 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1849 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1850 /* If passive , set up for auto-switch
1851 * and use long active_dwell time.
1853 if (!is_active
|| iwl_legacy_is_channel_passive(ch_info
) ||
1854 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)) {
1855 scan_ch
->type
= 0; /* passive */
1856 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
1857 scan_ch
->active_dwell
= cpu_to_le16(passive_dwell
- 1);
1859 scan_ch
->type
= 1; /* active */
1862 /* Set direct probe bits. These may be used both for active
1863 * scan channels (probes gets sent right away),
1864 * or for passive channels (probes get se sent only after
1865 * hearing clear Rx packet).*/
1866 if (IWL_UCODE_API(priv
->ucode_ver
) >= 2) {
1868 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1870 /* uCode v1 does not allow setting direct probe bits on
1871 * passive channel. */
1872 if ((scan_ch
->type
& 1) && n_probes
)
1873 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1876 /* Set txpower levels to defaults */
1877 scan_ch
->tpc
.dsp_atten
= 110;
1878 /* scan_pwr_info->tpc.dsp_atten; */
1880 /*scan_pwr_info->tpc.tx_gain; */
1881 if (band
== IEEE80211_BAND_5GHZ
)
1882 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1884 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
1885 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1887 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1891 IWL_DEBUG_SCAN(priv
, "Scanning %d [%s %d]\n",
1893 (scan_ch
->type
& 1) ? "ACTIVE" : "PASSIVE",
1894 (scan_ch
->type
& 1) ?
1895 active_dwell
: passive_dwell
);
1901 IWL_DEBUG_SCAN(priv
, "total channels to scan %d\n", added
);
1905 static void iwl3945_init_hw_rates(struct iwl_priv
*priv
,
1906 struct ieee80211_rate
*rates
)
1910 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
1911 rates
[i
].bitrate
= iwl3945_rates
[i
].ieee
* 5;
1912 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
1913 rates
[i
].hw_value_short
= i
;
1915 if ((i
> IWL39_LAST_OFDM_RATE
) || (i
< IWL_FIRST_OFDM_RATE
)) {
1917 * If CCK != 1M then set short preamble rate flag.
1919 rates
[i
].flags
|= (iwl3945_rates
[i
].plcp
== 10) ?
1920 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
1925 /******************************************************************************
1927 * uCode download functions
1929 ******************************************************************************/
1931 static void iwl3945_dealloc_ucode_pci(struct iwl_priv
*priv
)
1933 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
1934 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
1935 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
1936 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
1937 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
1938 iwl_legacy_free_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
1942 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
1943 * looking at all data.
1945 static int iwl3945_verify_inst_full(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1952 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1954 iwl_legacy_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
1955 IWL39_RTC_INST_LOWER_BOUND
);
1958 for (; len
> 0; len
-= sizeof(u32
), image
++) {
1959 /* read data comes through single port, auto-incr addr */
1960 /* NOTE: Use the debugless read so we don't flood kernel log
1961 * if IWL_DL_IO is set */
1962 val
= _iwl_legacy_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1963 if (val
!= le32_to_cpu(*image
)) {
1964 IWL_ERR(priv
, "uCode INST section is invalid at "
1965 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1966 save_len
- len
, val
, le32_to_cpu(*image
));
1976 IWL_DEBUG_INFO(priv
,
1977 "ucode image in INSTRUCTION memory is good\n");
1984 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1985 * using sample data 100 bytes apart. If these sample points are good,
1986 * it's a pretty good bet that everything between them is good, too.
1988 static int iwl3945_verify_inst_sparse(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1995 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1997 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
1998 /* read data comes through single port, auto-incr addr */
1999 /* NOTE: Use the debugless read so we don't flood kernel log
2000 * if IWL_DL_IO is set */
2001 iwl_legacy_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
2002 i
+ IWL39_RTC_INST_LOWER_BOUND
);
2003 val
= _iwl_legacy_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
2004 if (val
!= le32_to_cpu(*image
)) {
2005 #if 0 /* Enable this if you want to see details */
2006 IWL_ERR(priv
, "uCode INST section is invalid at "
2007 "offset 0x%x, is 0x%x, s/b 0x%x\n",
2022 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
2023 * and verify its contents
2025 static int iwl3945_verify_ucode(struct iwl_priv
*priv
)
2032 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2033 len
= priv
->ucode_boot
.len
;
2034 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2036 IWL_DEBUG_INFO(priv
, "Bootstrap uCode is good in inst SRAM\n");
2040 /* Try initialize */
2041 image
= (__le32
*)priv
->ucode_init
.v_addr
;
2042 len
= priv
->ucode_init
.len
;
2043 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2045 IWL_DEBUG_INFO(priv
, "Initialize uCode is good in inst SRAM\n");
2049 /* Try runtime/protocol */
2050 image
= (__le32
*)priv
->ucode_code
.v_addr
;
2051 len
= priv
->ucode_code
.len
;
2052 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2054 IWL_DEBUG_INFO(priv
, "Runtime uCode is good in inst SRAM\n");
2058 IWL_ERR(priv
, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
2060 /* Since nothing seems to match, show first several data entries in
2061 * instruction SRAM, so maybe visual inspection will give a clue.
2062 * Selection of bootstrap image (vs. other images) is arbitrary. */
2063 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2064 len
= priv
->ucode_boot
.len
;
2065 rc
= iwl3945_verify_inst_full(priv
, image
, len
);
2070 static void iwl3945_nic_start(struct iwl_priv
*priv
)
2072 /* Remove all resets to allow NIC to operate */
2073 iwl_write32(priv
, CSR_RESET
, 0);
2076 #define IWL3945_UCODE_GET(item) \
2077 static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\
2079 return le32_to_cpu(ucode->v1.item); \
2082 static u32
iwl3945_ucode_get_header_size(u32 api_ver
)
2087 static u8
*iwl3945_ucode_get_data(const struct iwl_ucode_header
*ucode
)
2089 return (u8
*) ucode
->v1
.data
;
2092 IWL3945_UCODE_GET(inst_size
);
2093 IWL3945_UCODE_GET(data_size
);
2094 IWL3945_UCODE_GET(init_size
);
2095 IWL3945_UCODE_GET(init_data_size
);
2096 IWL3945_UCODE_GET(boot_size
);
2099 * iwl3945_read_ucode - Read uCode images from disk file.
2101 * Copy into buffers for card to fetch via bus-mastering
2103 static int iwl3945_read_ucode(struct iwl_priv
*priv
)
2105 const struct iwl_ucode_header
*ucode
;
2106 int ret
= -EINVAL
, index
;
2107 const struct firmware
*ucode_raw
;
2108 /* firmware file name contains uCode/driver compatibility version */
2109 const char *name_pre
= priv
->cfg
->fw_name_pre
;
2110 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
2111 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
2115 u32 api_ver
, inst_size
, data_size
, init_size
, init_data_size
, boot_size
;
2117 /* Ask kernel firmware_class module to get the boot firmware off disk.
2118 * request_firmware() is synchronous, file is in memory on return. */
2119 for (index
= api_max
; index
>= api_min
; index
--) {
2120 sprintf(buf
, "%s%u%s", name_pre
, index
, ".ucode");
2121 ret
= request_firmware(&ucode_raw
, buf
, &priv
->pci_dev
->dev
);
2123 IWL_ERR(priv
, "%s firmware file req failed: %d\n",
2130 if (index
< api_max
)
2131 IWL_ERR(priv
, "Loaded firmware %s, "
2132 "which is deprecated. "
2133 " Please use API v%u instead.\n",
2135 IWL_DEBUG_INFO(priv
, "Got firmware '%s' file "
2136 "(%zd bytes) from disk\n",
2137 buf
, ucode_raw
->size
);
2145 /* Make sure that we got at least our header! */
2146 if (ucode_raw
->size
< iwl3945_ucode_get_header_size(1)) {
2147 IWL_ERR(priv
, "File size way too small!\n");
2152 /* Data from ucode file: header followed by uCode images */
2153 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
2155 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
2156 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
2157 inst_size
= iwl3945_ucode_get_inst_size(ucode
);
2158 data_size
= iwl3945_ucode_get_data_size(ucode
);
2159 init_size
= iwl3945_ucode_get_init_size(ucode
);
2160 init_data_size
= iwl3945_ucode_get_init_data_size(ucode
);
2161 boot_size
= iwl3945_ucode_get_boot_size(ucode
);
2162 src
= iwl3945_ucode_get_data(ucode
);
2164 /* api_ver should match the api version forming part of the
2165 * firmware filename ... but we don't check for that and only rely
2166 * on the API version read from firmware header from here on forward */
2168 if (api_ver
< api_min
|| api_ver
> api_max
) {
2169 IWL_ERR(priv
, "Driver unable to support your firmware API. "
2170 "Driver supports v%u, firmware is v%u.\n",
2172 priv
->ucode_ver
= 0;
2176 if (api_ver
!= api_max
)
2177 IWL_ERR(priv
, "Firmware has old API version. Expected %u, "
2178 "got %u. New firmware can be obtained "
2179 "from http://www.intellinuxwireless.org.\n",
2182 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u\n",
2183 IWL_UCODE_MAJOR(priv
->ucode_ver
),
2184 IWL_UCODE_MINOR(priv
->ucode_ver
),
2185 IWL_UCODE_API(priv
->ucode_ver
),
2186 IWL_UCODE_SERIAL(priv
->ucode_ver
));
2188 snprintf(priv
->hw
->wiphy
->fw_version
,
2189 sizeof(priv
->hw
->wiphy
->fw_version
),
2191 IWL_UCODE_MAJOR(priv
->ucode_ver
),
2192 IWL_UCODE_MINOR(priv
->ucode_ver
),
2193 IWL_UCODE_API(priv
->ucode_ver
),
2194 IWL_UCODE_SERIAL(priv
->ucode_ver
));
2196 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
2198 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %u\n",
2200 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %u\n",
2202 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %u\n",
2204 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %u\n",
2206 IWL_DEBUG_INFO(priv
, "f/w package hdr boot inst size = %u\n",
2210 /* Verify size of file vs. image size info in file's header */
2211 if (ucode_raw
->size
!= iwl3945_ucode_get_header_size(api_ver
) +
2212 inst_size
+ data_size
+ init_size
+
2213 init_data_size
+ boot_size
) {
2215 IWL_DEBUG_INFO(priv
,
2216 "uCode file size %zd does not match expected size\n",
2222 /* Verify that uCode images will fit in card's SRAM */
2223 if (inst_size
> IWL39_MAX_INST_SIZE
) {
2224 IWL_DEBUG_INFO(priv
, "uCode instr len %d too large to fit in\n",
2230 if (data_size
> IWL39_MAX_DATA_SIZE
) {
2231 IWL_DEBUG_INFO(priv
, "uCode data len %d too large to fit in\n",
2236 if (init_size
> IWL39_MAX_INST_SIZE
) {
2237 IWL_DEBUG_INFO(priv
,
2238 "uCode init instr len %d too large to fit in\n",
2243 if (init_data_size
> IWL39_MAX_DATA_SIZE
) {
2244 IWL_DEBUG_INFO(priv
,
2245 "uCode init data len %d too large to fit in\n",
2250 if (boot_size
> IWL39_MAX_BSM_SIZE
) {
2251 IWL_DEBUG_INFO(priv
,
2252 "uCode boot instr len %d too large to fit in\n",
2258 /* Allocate ucode buffers for card's bus-master loading ... */
2260 /* Runtime instructions and 2 copies of data:
2261 * 1) unmodified from disk
2262 * 2) backup cache for save/restore during power-downs */
2263 priv
->ucode_code
.len
= inst_size
;
2264 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
2266 priv
->ucode_data
.len
= data_size
;
2267 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
2269 priv
->ucode_data_backup
.len
= data_size
;
2270 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
2272 if (!priv
->ucode_code
.v_addr
|| !priv
->ucode_data
.v_addr
||
2273 !priv
->ucode_data_backup
.v_addr
)
2276 /* Initialization instructions and data */
2277 if (init_size
&& init_data_size
) {
2278 priv
->ucode_init
.len
= init_size
;
2279 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
2281 priv
->ucode_init_data
.len
= init_data_size
;
2282 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
2284 if (!priv
->ucode_init
.v_addr
|| !priv
->ucode_init_data
.v_addr
)
2288 /* Bootstrap (instructions only, no data) */
2290 priv
->ucode_boot
.len
= boot_size
;
2291 iwl_legacy_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
2293 if (!priv
->ucode_boot
.v_addr
)
2297 /* Copy images into buffers for card's bus-master reads ... */
2299 /* Runtime instructions (first block of data in file) */
2301 IWL_DEBUG_INFO(priv
,
2302 "Copying (but not loading) uCode instr len %zd\n", len
);
2303 memcpy(priv
->ucode_code
.v_addr
, src
, len
);
2306 IWL_DEBUG_INFO(priv
, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2307 priv
->ucode_code
.v_addr
, (u32
)priv
->ucode_code
.p_addr
);
2309 /* Runtime data (2nd block)
2310 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
2312 IWL_DEBUG_INFO(priv
,
2313 "Copying (but not loading) uCode data len %zd\n", len
);
2314 memcpy(priv
->ucode_data
.v_addr
, src
, len
);
2315 memcpy(priv
->ucode_data_backup
.v_addr
, src
, len
);
2318 /* Initialization instructions (3rd block) */
2321 IWL_DEBUG_INFO(priv
,
2322 "Copying (but not loading) init instr len %zd\n", len
);
2323 memcpy(priv
->ucode_init
.v_addr
, src
, len
);
2327 /* Initialization data (4th block) */
2328 if (init_data_size
) {
2329 len
= init_data_size
;
2330 IWL_DEBUG_INFO(priv
,
2331 "Copying (but not loading) init data len %zd\n", len
);
2332 memcpy(priv
->ucode_init_data
.v_addr
, src
, len
);
2336 /* Bootstrap instructions (5th block) */
2338 IWL_DEBUG_INFO(priv
,
2339 "Copying (but not loading) boot instr len %zd\n", len
);
2340 memcpy(priv
->ucode_boot
.v_addr
, src
, len
);
2342 /* We have our copies now, allow OS release its copies */
2343 release_firmware(ucode_raw
);
2347 IWL_ERR(priv
, "failed to allocate pci memory\n");
2349 iwl3945_dealloc_ucode_pci(priv
);
2352 release_firmware(ucode_raw
);
2360 * iwl3945_set_ucode_ptrs - Set uCode address location
2362 * Tell initialization uCode where to find runtime uCode.
2364 * BSM registers initially contain pointers to initialization uCode.
2365 * We need to replace them to load runtime uCode inst and data,
2366 * and to save runtime data when powering down.
2368 static int iwl3945_set_ucode_ptrs(struct iwl_priv
*priv
)
2373 /* bits 31:0 for 3945 */
2374 pinst
= priv
->ucode_code
.p_addr
;
2375 pdata
= priv
->ucode_data_backup
.p_addr
;
2377 /* Tell bootstrap uCode where to find image to load */
2378 iwl_legacy_write_prph(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
2379 iwl_legacy_write_prph(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
2380 iwl_legacy_write_prph(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
,
2381 priv
->ucode_data
.len
);
2383 /* Inst byte count must be last to set up, bit 31 signals uCode
2384 * that all new ptr/size info is in place */
2385 iwl_legacy_write_prph(priv
, BSM_DRAM_INST_BYTECOUNT_REG
,
2386 priv
->ucode_code
.len
| BSM_DRAM_INST_LOAD
);
2388 IWL_DEBUG_INFO(priv
, "Runtime uCode pointers are set.\n");
2394 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
2396 * Called after REPLY_ALIVE notification received from "initialize" uCode.
2398 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2400 static void iwl3945_init_alive_start(struct iwl_priv
*priv
)
2402 /* Check alive response for "valid" sign from uCode */
2403 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
2404 /* We had an error bringing up the hardware, so take it
2405 * all the way back down so we can try again */
2406 IWL_DEBUG_INFO(priv
, "Initialize Alive failed.\n");
2410 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2411 * This is a paranoid check, because we would not have gotten the
2412 * "initialize" alive if code weren't properly loaded. */
2413 if (iwl3945_verify_ucode(priv
)) {
2414 /* Runtime instruction load was bad;
2415 * take it all the way back down so we can try again */
2416 IWL_DEBUG_INFO(priv
, "Bad \"initialize\" uCode load.\n");
2420 /* Send pointers to protocol/runtime uCode image ... init code will
2421 * load and launch runtime uCode, which will send us another "Alive"
2423 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
2424 if (iwl3945_set_ucode_ptrs(priv
)) {
2425 /* Runtime instruction load won't happen;
2426 * take it all the way back down so we can try again */
2427 IWL_DEBUG_INFO(priv
, "Couldn't set up uCode pointers.\n");
2433 queue_work(priv
->workqueue
, &priv
->restart
);
2437 * iwl3945_alive_start - called after REPLY_ALIVE notification received
2438 * from protocol/runtime uCode (initialization uCode's
2439 * Alive gets handled by iwl3945_init_alive_start()).
2441 static void iwl3945_alive_start(struct iwl_priv
*priv
)
2443 int thermal_spin
= 0;
2445 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2447 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
2449 if (priv
->card_alive
.is_valid
!= UCODE_VALID_OK
) {
2450 /* We had an error bringing up the hardware, so take it
2451 * all the way back down so we can try again */
2452 IWL_DEBUG_INFO(priv
, "Alive failed.\n");
2456 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2457 * This is a paranoid check, because we would not have gotten the
2458 * "runtime" alive if code weren't properly loaded. */
2459 if (iwl3945_verify_ucode(priv
)) {
2460 /* Runtime instruction load was bad;
2461 * take it all the way back down so we can try again */
2462 IWL_DEBUG_INFO(priv
, "Bad runtime uCode load.\n");
2466 rfkill
= iwl_legacy_read_prph(priv
, APMG_RFKILL_REG
);
2467 IWL_DEBUG_INFO(priv
, "RFKILL status: 0x%x\n", rfkill
);
2470 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2471 /* if RFKILL is not on, then wait for thermal
2472 * sensor in adapter to kick in */
2473 while (iwl3945_hw_get_temperature(priv
) == 0) {
2479 IWL_DEBUG_INFO(priv
, "Thermal calibration took %dus\n",
2482 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2484 /* After the ALIVE response, we can send commands to 3945 uCode */
2485 set_bit(STATUS_ALIVE
, &priv
->status
);
2487 /* Enable watchdog to monitor the driver tx queues */
2488 iwl_legacy_setup_watchdog(priv
);
2490 if (iwl_legacy_is_rfkill(priv
))
2493 ieee80211_wake_queues(priv
->hw
);
2495 priv
->active_rate
= IWL_RATES_MASK_3945
;
2497 iwl_legacy_power_update_mode(priv
, true);
2499 if (iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
)) {
2500 struct iwl3945_rxon_cmd
*active_rxon
=
2501 (struct iwl3945_rxon_cmd
*)(&ctx
->active
);
2503 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2504 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2506 /* Initialize our rx_config data */
2507 iwl_legacy_connection_init_rx_config(priv
, ctx
);
2510 /* Configure Bluetooth device coexistence support */
2511 iwl_legacy_send_bt_config(priv
);
2513 set_bit(STATUS_READY
, &priv
->status
);
2515 /* Configure the adapter for unassociated operation */
2516 iwl3945_commit_rxon(priv
, ctx
);
2518 iwl3945_reg_txpower_periodic(priv
);
2520 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2521 wake_up_interruptible(&priv
->wait_command_queue
);
2526 queue_work(priv
->workqueue
, &priv
->restart
);
2529 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
);
2531 static void __iwl3945_down(struct iwl_priv
*priv
)
2533 unsigned long flags
;
2536 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2538 iwl_legacy_scan_cancel_timeout(priv
, 200);
2540 exit_pending
= test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2542 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
2543 * to prevent rearm timer */
2544 del_timer_sync(&priv
->watchdog
);
2546 /* Station information will now be cleared in device */
2547 iwl_legacy_clear_ucode_stations(priv
, NULL
);
2548 iwl_legacy_dealloc_bcast_stations(priv
);
2549 iwl_legacy_clear_driver_stations(priv
);
2551 /* Unblock any waiting calls */
2552 wake_up_interruptible_all(&priv
->wait_command_queue
);
2554 /* Wipe out the EXIT_PENDING status bit if we are not actually
2555 * exiting the module */
2557 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2559 /* stop and reset the on-board processor */
2560 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
2562 /* tell the device to stop sending interrupts */
2563 spin_lock_irqsave(&priv
->lock
, flags
);
2564 iwl_legacy_disable_interrupts(priv
);
2565 spin_unlock_irqrestore(&priv
->lock
, flags
);
2566 iwl3945_synchronize_irq(priv
);
2568 if (priv
->mac80211_registered
)
2569 ieee80211_stop_queues(priv
->hw
);
2571 /* If we have not previously called iwl3945_init() then
2572 * clear all bits but the RF Kill bits and return */
2573 if (!iwl_legacy_is_init(priv
)) {
2574 priv
->status
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2576 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2577 STATUS_GEO_CONFIGURED
|
2578 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2579 STATUS_EXIT_PENDING
;
2583 /* ...otherwise clear out all the status bits but the RF Kill
2584 * bit and continue taking the NIC down. */
2585 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2587 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2588 STATUS_GEO_CONFIGURED
|
2589 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2591 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2592 STATUS_EXIT_PENDING
;
2594 iwl3945_hw_txq_ctx_stop(priv
);
2595 iwl3945_hw_rxq_stop(priv
);
2597 /* Power-down device's busmaster DMA clocks */
2598 iwl_legacy_write_prph(priv
, APMG_CLK_DIS_REG
, APMG_CLK_VAL_DMA_CLK_RQT
);
2601 /* Stop the device, and put it in low power state */
2602 iwl_legacy_apm_stop(priv
);
2605 memset(&priv
->card_alive
, 0, sizeof(struct iwl_alive_resp
));
2607 if (priv
->beacon_skb
)
2608 dev_kfree_skb(priv
->beacon_skb
);
2609 priv
->beacon_skb
= NULL
;
2611 /* clear out any free frames */
2612 iwl3945_clear_free_frames(priv
);
2615 static void iwl3945_down(struct iwl_priv
*priv
)
2617 mutex_lock(&priv
->mutex
);
2618 __iwl3945_down(priv
);
2619 mutex_unlock(&priv
->mutex
);
2621 iwl3945_cancel_deferred_work(priv
);
2624 #define MAX_HW_RESTARTS 5
2626 static int iwl3945_alloc_bcast_station(struct iwl_priv
*priv
)
2628 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2629 unsigned long flags
;
2632 spin_lock_irqsave(&priv
->sta_lock
, flags
);
2633 sta_id
= iwl_legacy_prep_station(priv
, ctx
,
2634 iwlegacy_bcast_addr
, false, NULL
);
2635 if (sta_id
== IWL_INVALID_STATION
) {
2636 IWL_ERR(priv
, "Unable to prepare broadcast station\n");
2637 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
2642 priv
->stations
[sta_id
].used
|= IWL_STA_DRIVER_ACTIVE
;
2643 priv
->stations
[sta_id
].used
|= IWL_STA_BCAST
;
2644 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
2649 static int __iwl3945_up(struct iwl_priv
*priv
)
2653 rc
= iwl3945_alloc_bcast_station(priv
);
2657 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2658 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2662 if (!priv
->ucode_data_backup
.v_addr
|| !priv
->ucode_data
.v_addr
) {
2663 IWL_ERR(priv
, "ucode not available for device bring up\n");
2667 /* If platform's RF_KILL switch is NOT set to KILL */
2668 if (iwl_read32(priv
, CSR_GP_CNTRL
) &
2669 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
2670 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2672 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2673 IWL_WARN(priv
, "Radio disabled by HW RF Kill switch\n");
2677 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2679 rc
= iwl3945_hw_nic_init(priv
);
2681 IWL_ERR(priv
, "Unable to int nic\n");
2685 /* make sure rfkill handshake bits are cleared */
2686 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2687 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
2688 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
2690 /* clear (again), then enable host interrupts */
2691 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2692 iwl_legacy_enable_interrupts(priv
);
2694 /* really make sure rfkill handshake bits are cleared */
2695 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2696 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2698 /* Copy original ucode data image from disk into backup cache.
2699 * This will be used to initialize the on-board processor's
2700 * data SRAM for a clean start when the runtime program first loads. */
2701 memcpy(priv
->ucode_data_backup
.v_addr
, priv
->ucode_data
.v_addr
,
2702 priv
->ucode_data
.len
);
2704 /* We return success when we resume from suspend and rf_kill is on. */
2705 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
2708 for (i
= 0; i
< MAX_HW_RESTARTS
; i
++) {
2710 /* load bootstrap state machine,
2711 * load bootstrap program into processor's memory,
2712 * prepare to load the "initialize" uCode */
2713 rc
= priv
->cfg
->ops
->lib
->load_ucode(priv
);
2717 "Unable to set up bootstrap uCode: %d\n", rc
);
2721 /* start card; "initialize" will load runtime ucode */
2722 iwl3945_nic_start(priv
);
2724 IWL_DEBUG_INFO(priv
, DRV_NAME
" is coming up\n");
2729 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2730 __iwl3945_down(priv
);
2731 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2733 /* tried to restart and config the device for as long as our
2734 * patience could withstand */
2735 IWL_ERR(priv
, "Unable to initialize device after %d attempts.\n", i
);
2740 /*****************************************************************************
2742 * Workqueue callbacks
2744 *****************************************************************************/
2746 static void iwl3945_bg_init_alive_start(struct work_struct
*data
)
2748 struct iwl_priv
*priv
=
2749 container_of(data
, struct iwl_priv
, init_alive_start
.work
);
2751 mutex_lock(&priv
->mutex
);
2752 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2755 iwl3945_init_alive_start(priv
);
2757 mutex_unlock(&priv
->mutex
);
2760 static void iwl3945_bg_alive_start(struct work_struct
*data
)
2762 struct iwl_priv
*priv
=
2763 container_of(data
, struct iwl_priv
, alive_start
.work
);
2765 mutex_lock(&priv
->mutex
);
2766 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2769 iwl3945_alive_start(priv
);
2771 mutex_unlock(&priv
->mutex
);
2775 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2776 * driver must poll CSR_GP_CNTRL_REG register for change. This register
2777 * *is* readable even when device has been SW_RESET into low power mode
2778 * (e.g. during RF KILL).
2780 static void iwl3945_rfkill_poll(struct work_struct
*data
)
2782 struct iwl_priv
*priv
=
2783 container_of(data
, struct iwl_priv
, _3945
.rfkill_poll
.work
);
2784 bool old_rfkill
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2785 bool new_rfkill
= !(iwl_read32(priv
, CSR_GP_CNTRL
)
2786 & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
);
2788 if (new_rfkill
!= old_rfkill
) {
2790 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2792 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2794 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, new_rfkill
);
2796 IWL_DEBUG_RF_KILL(priv
, "RF_KILL bit toggled to %s.\n",
2797 new_rfkill
? "disable radio" : "enable radio");
2800 /* Keep this running, even if radio now enabled. This will be
2801 * cancelled in mac_start() if system decides to start again */
2802 queue_delayed_work(priv
->workqueue
, &priv
->_3945
.rfkill_poll
,
2803 round_jiffies_relative(2 * HZ
));
2807 int iwl3945_request_scan(struct iwl_priv
*priv
, struct ieee80211_vif
*vif
)
2809 struct iwl_host_cmd cmd
= {
2810 .id
= REPLY_SCAN_CMD
,
2811 .len
= sizeof(struct iwl3945_scan_cmd
),
2812 .flags
= CMD_SIZE_HUGE
,
2814 struct iwl3945_scan_cmd
*scan
;
2816 enum ieee80211_band band
;
2817 bool is_active
= false;
2820 lockdep_assert_held(&priv
->mutex
);
2822 if (!priv
->scan_cmd
) {
2823 priv
->scan_cmd
= kmalloc(sizeof(struct iwl3945_scan_cmd
) +
2824 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
2825 if (!priv
->scan_cmd
) {
2826 IWL_DEBUG_SCAN(priv
, "Fail to allocate scan memory\n");
2830 scan
= priv
->scan_cmd
;
2831 memset(scan
, 0, sizeof(struct iwl3945_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
2833 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
2834 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
2836 if (iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
)) {
2839 u32 suspend_time
= 100;
2840 u32 scan_suspend_time
= 100;
2842 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
2844 if (priv
->is_internal_short_scan
)
2847 interval
= vif
->bss_conf
.beacon_int
;
2849 scan
->suspend_time
= 0;
2850 scan
->max_out_time
= cpu_to_le32(200 * 1024);
2852 interval
= suspend_time
;
2854 * suspend time format:
2855 * 0-19: beacon interval in usec (time before exec.)
2857 * 24-31: number of beacons (suspend between channels)
2860 extra
= (suspend_time
/ interval
) << 24;
2861 scan_suspend_time
= 0xFF0FFFFF &
2862 (extra
| ((suspend_time
% interval
) * 1024));
2864 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
2865 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
2866 scan_suspend_time
, interval
);
2869 if (priv
->is_internal_short_scan
) {
2870 IWL_DEBUG_SCAN(priv
, "Start internal passive scan.\n");
2871 } else if (priv
->scan_request
->n_ssids
) {
2873 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
2874 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
2875 /* always does wildcard anyway */
2876 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
2878 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
2879 scan
->direct_scan
[p
].len
=
2880 priv
->scan_request
->ssids
[i
].ssid_len
;
2881 memcpy(scan
->direct_scan
[p
].ssid
,
2882 priv
->scan_request
->ssids
[i
].ssid
,
2883 priv
->scan_request
->ssids
[i
].ssid_len
);
2889 IWL_DEBUG_SCAN(priv
, "Kicking off passive scan.\n");
2891 /* We don't build a direct scan probe request; the uCode will do
2892 * that based on the direct_mask added to each channel entry */
2893 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
2894 scan
->tx_cmd
.sta_id
= priv
->contexts
[IWL_RXON_CTX_BSS
].bcast_sta_id
;
2895 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2897 /* flags + rate selection */
2899 switch (priv
->scan_band
) {
2900 case IEEE80211_BAND_2GHZ
:
2901 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
2902 scan
->tx_cmd
.rate
= IWL_RATE_1M_PLCP
;
2903 band
= IEEE80211_BAND_2GHZ
;
2905 case IEEE80211_BAND_5GHZ
:
2906 scan
->tx_cmd
.rate
= IWL_RATE_6M_PLCP
;
2907 band
= IEEE80211_BAND_5GHZ
;
2910 IWL_WARN(priv
, "Invalid scan band\n");
2915 * If active scaning is requested but a certain channel
2916 * is marked passive, we can do active scanning if we
2917 * detect transmissions.
2919 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
2920 IWL_GOOD_CRC_TH_DISABLED
;
2922 if (!priv
->is_internal_short_scan
) {
2923 scan
->tx_cmd
.len
= cpu_to_le16(
2924 iwl_legacy_fill_probe_req(priv
,
2925 (struct ieee80211_mgmt
*)scan
->data
,
2927 priv
->scan_request
->ie
,
2928 priv
->scan_request
->ie_len
,
2929 IWL_MAX_SCAN_SIZE
- sizeof(*scan
)));
2931 /* use bcast addr, will not be transmitted but must be valid */
2932 scan
->tx_cmd
.len
= cpu_to_le16(
2933 iwl_legacy_fill_probe_req(priv
,
2934 (struct ieee80211_mgmt
*)scan
->data
,
2935 iwlegacy_bcast_addr
, NULL
, 0,
2936 IWL_MAX_SCAN_SIZE
- sizeof(*scan
)));
2938 /* select Rx antennas */
2939 scan
->flags
|= iwl3945_get_antenna_flags(priv
);
2941 if (priv
->is_internal_short_scan
) {
2942 scan
->channel_count
=
2943 iwl3945_get_single_channel_for_scan(priv
, vif
, band
,
2944 (void *)&scan
->data
[le16_to_cpu(
2945 scan
->tx_cmd
.len
)]);
2947 scan
->channel_count
=
2948 iwl3945_get_channels_for_scan(priv
, band
, is_active
, n_probes
,
2949 (void *)&scan
->data
[le16_to_cpu(scan
->tx_cmd
.len
)], vif
);
2952 if (scan
->channel_count
== 0) {
2953 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
2957 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
2958 scan
->channel_count
* sizeof(struct iwl3945_scan_channel
);
2960 scan
->len
= cpu_to_le16(cmd
.len
);
2962 set_bit(STATUS_SCAN_HW
, &priv
->status
);
2963 ret
= iwl_legacy_send_cmd_sync(priv
, &cmd
);
2965 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
2969 void iwl3945_post_scan(struct iwl_priv
*priv
)
2971 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2974 * Since setting the RXON may have been deferred while
2975 * performing the scan, fire one off if needed
2977 if (memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
2978 iwl3945_commit_rxon(priv
, ctx
);
2981 static void iwl3945_bg_restart(struct work_struct
*data
)
2983 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2985 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2988 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2989 struct iwl_rxon_context
*ctx
;
2990 mutex_lock(&priv
->mutex
);
2991 for_each_context(priv
, ctx
)
2994 mutex_unlock(&priv
->mutex
);
2996 ieee80211_restart_hw(priv
->hw
);
3000 mutex_lock(&priv
->mutex
);
3001 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
3002 mutex_unlock(&priv
->mutex
);
3007 mutex_unlock(&priv
->mutex
);
3011 static void iwl3945_bg_rx_replenish(struct work_struct
*data
)
3013 struct iwl_priv
*priv
=
3014 container_of(data
, struct iwl_priv
, rx_replenish
);
3016 mutex_lock(&priv
->mutex
);
3017 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3020 iwl3945_rx_replenish(priv
);
3022 mutex_unlock(&priv
->mutex
);
3025 void iwl3945_post_associate(struct iwl_priv
*priv
)
3028 struct ieee80211_conf
*conf
= NULL
;
3029 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3031 if (!ctx
->vif
|| !priv
->is_open
)
3034 IWL_DEBUG_ASSOC(priv
, "Associated as %d to: %pM\n",
3035 ctx
->vif
->bss_conf
.aid
, ctx
->active
.bssid_addr
);
3037 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3040 iwl_legacy_scan_cancel_timeout(priv
, 200);
3042 conf
= iwl_legacy_ieee80211_get_hw_conf(priv
->hw
);
3044 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3045 iwl3945_commit_rxon(priv
, ctx
);
3047 rc
= iwl_legacy_send_rxon_timing(priv
, ctx
);
3049 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3050 "Attempting to continue.\n");
3052 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3054 ctx
->staging
.assoc_id
= cpu_to_le16(ctx
->vif
->bss_conf
.aid
);
3056 IWL_DEBUG_ASSOC(priv
, "assoc id %d beacon interval %d\n",
3057 ctx
->vif
->bss_conf
.aid
, ctx
->vif
->bss_conf
.beacon_int
);
3059 if (ctx
->vif
->bss_conf
.use_short_preamble
)
3060 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
3062 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3064 if (ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
) {
3065 if (ctx
->vif
->bss_conf
.use_short_slot
)
3066 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
3068 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
3071 iwl3945_commit_rxon(priv
, ctx
);
3073 switch (ctx
->vif
->type
) {
3074 case NL80211_IFTYPE_STATION
:
3075 iwl3945_rate_scale_init(priv
->hw
, IWL_AP_ID
);
3077 case NL80211_IFTYPE_ADHOC
:
3078 iwl3945_send_beacon_cmd(priv
);
3081 IWL_ERR(priv
, "%s Should not be called in %d mode\n",
3082 __func__
, ctx
->vif
->type
);
3087 /*****************************************************************************
3089 * mac80211 entry point functions
3091 *****************************************************************************/
3093 #define UCODE_READY_TIMEOUT (2 * HZ)
3095 static int iwl3945_mac_start(struct ieee80211_hw
*hw
)
3097 struct iwl_priv
*priv
= hw
->priv
;
3100 IWL_DEBUG_MAC80211(priv
, "enter\n");
3102 /* we should be verifying the device is ready to be opened */
3103 mutex_lock(&priv
->mutex
);
3105 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
3106 * ucode filename and max sizes are card-specific. */
3108 if (!priv
->ucode_code
.len
) {
3109 ret
= iwl3945_read_ucode(priv
);
3111 IWL_ERR(priv
, "Could not read microcode: %d\n", ret
);
3112 mutex_unlock(&priv
->mutex
);
3113 goto out_release_irq
;
3117 ret
= __iwl3945_up(priv
);
3119 mutex_unlock(&priv
->mutex
);
3122 goto out_release_irq
;
3124 IWL_DEBUG_INFO(priv
, "Start UP work.\n");
3126 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
3127 * mac80211 will not be run successfully. */
3128 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
3129 test_bit(STATUS_READY
, &priv
->status
),
3130 UCODE_READY_TIMEOUT
);
3132 if (!test_bit(STATUS_READY
, &priv
->status
)) {
3134 "Wait for START_ALIVE timeout after %dms.\n",
3135 jiffies_to_msecs(UCODE_READY_TIMEOUT
));
3137 goto out_release_irq
;
3141 /* ucode is running and will send rfkill notifications,
3142 * no need to poll the killswitch state anymore */
3143 cancel_delayed_work(&priv
->_3945
.rfkill_poll
);
3146 IWL_DEBUG_MAC80211(priv
, "leave\n");
3151 IWL_DEBUG_MAC80211(priv
, "leave - failed\n");
3155 static void iwl3945_mac_stop(struct ieee80211_hw
*hw
)
3157 struct iwl_priv
*priv
= hw
->priv
;
3159 IWL_DEBUG_MAC80211(priv
, "enter\n");
3161 if (!priv
->is_open
) {
3162 IWL_DEBUG_MAC80211(priv
, "leave - skip\n");
3170 flush_workqueue(priv
->workqueue
);
3172 /* start polling the killswitch state again */
3173 queue_delayed_work(priv
->workqueue
, &priv
->_3945
.rfkill_poll
,
3174 round_jiffies_relative(2 * HZ
));
3176 IWL_DEBUG_MAC80211(priv
, "leave\n");
3179 static void iwl3945_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
3181 struct iwl_priv
*priv
= hw
->priv
;
3183 IWL_DEBUG_MAC80211(priv
, "enter\n");
3185 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
3186 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
3188 if (iwl3945_tx_skb(priv
, skb
))
3189 dev_kfree_skb_any(skb
);
3191 IWL_DEBUG_MAC80211(priv
, "leave\n");
3194 void iwl3945_config_ap(struct iwl_priv
*priv
)
3196 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3197 struct ieee80211_vif
*vif
= ctx
->vif
;
3200 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3203 /* The following should be done only at AP bring up */
3204 if (!(iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
))) {
3206 /* RXON - unassoc (to set timing command) */
3207 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3208 iwl3945_commit_rxon(priv
, ctx
);
3211 rc
= iwl_legacy_send_rxon_timing(priv
, ctx
);
3213 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3214 "Attempting to continue.\n");
3216 ctx
->staging
.assoc_id
= 0;
3218 if (vif
->bss_conf
.use_short_preamble
)
3219 ctx
->staging
.flags
|=
3220 RXON_FLG_SHORT_PREAMBLE_MSK
;
3222 ctx
->staging
.flags
&=
3223 ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3225 if (ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
) {
3226 if (vif
->bss_conf
.use_short_slot
)
3227 ctx
->staging
.flags
|=
3228 RXON_FLG_SHORT_SLOT_MSK
;
3230 ctx
->staging
.flags
&=
3231 ~RXON_FLG_SHORT_SLOT_MSK
;
3233 /* restore RXON assoc */
3234 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3235 iwl3945_commit_rxon(priv
, ctx
);
3237 iwl3945_send_beacon_cmd(priv
);
3240 static int iwl3945_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
3241 struct ieee80211_vif
*vif
,
3242 struct ieee80211_sta
*sta
,
3243 struct ieee80211_key_conf
*key
)
3245 struct iwl_priv
*priv
= hw
->priv
;
3247 u8 sta_id
= IWL_INVALID_STATION
;
3250 IWL_DEBUG_MAC80211(priv
, "enter\n");
3252 if (iwl3945_mod_params
.sw_crypto
) {
3253 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
3258 * To support IBSS RSN, don't program group keys in IBSS, the
3259 * hardware will then not attempt to decrypt the frames.
3261 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
3262 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
))
3265 static_key
= !iwl_legacy_is_associated(priv
, IWL_RXON_CTX_BSS
);
3268 sta_id
= iwl_legacy_sta_id_or_broadcast(
3269 priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
], sta
);
3270 if (sta_id
== IWL_INVALID_STATION
)
3274 mutex_lock(&priv
->mutex
);
3275 iwl_legacy_scan_cancel_timeout(priv
, 100);
3280 ret
= iwl3945_set_static_key(priv
, key
);
3282 ret
= iwl3945_set_dynamic_key(priv
, key
, sta_id
);
3283 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
3287 ret
= iwl3945_remove_static_key(priv
);
3289 ret
= iwl3945_clear_sta_key_info(priv
, sta_id
);
3290 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
3296 mutex_unlock(&priv
->mutex
);
3297 IWL_DEBUG_MAC80211(priv
, "leave\n");
3302 static int iwl3945_mac_sta_add(struct ieee80211_hw
*hw
,
3303 struct ieee80211_vif
*vif
,
3304 struct ieee80211_sta
*sta
)
3306 struct iwl_priv
*priv
= hw
->priv
;
3307 struct iwl3945_sta_priv
*sta_priv
= (void *)sta
->drv_priv
;
3309 bool is_ap
= vif
->type
== NL80211_IFTYPE_STATION
;
3312 IWL_DEBUG_INFO(priv
, "received request to add station %pM\n",
3314 mutex_lock(&priv
->mutex
);
3315 IWL_DEBUG_INFO(priv
, "proceeding to add station %pM\n",
3317 sta_priv
->common
.sta_id
= IWL_INVALID_STATION
;
3320 ret
= iwl_legacy_add_station_common(priv
,
3321 &priv
->contexts
[IWL_RXON_CTX_BSS
],
3322 sta
->addr
, is_ap
, sta
, &sta_id
);
3324 IWL_ERR(priv
, "Unable to add station %pM (%d)\n",
3326 /* Should we return success if return code is EEXIST ? */
3327 mutex_unlock(&priv
->mutex
);
3331 sta_priv
->common
.sta_id
= sta_id
;
3333 /* Initialize rate scaling */
3334 IWL_DEBUG_INFO(priv
, "Initializing rate scaling for station %pM\n",
3336 iwl3945_rs_rate_init(priv
, sta
, sta_id
);
3337 mutex_unlock(&priv
->mutex
);
3342 static void iwl3945_configure_filter(struct ieee80211_hw
*hw
,
3343 unsigned int changed_flags
,
3344 unsigned int *total_flags
,
3347 struct iwl_priv
*priv
= hw
->priv
;
3348 __le32 filter_or
= 0, filter_nand
= 0;
3349 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3351 #define CHK(test, flag) do { \
3352 if (*total_flags & (test)) \
3353 filter_or |= (flag); \
3355 filter_nand |= (flag); \
3358 IWL_DEBUG_MAC80211(priv
, "Enter: changed: 0x%x, total: 0x%x\n",
3359 changed_flags
, *total_flags
);
3361 CHK(FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
, RXON_FILTER_PROMISC_MSK
);
3362 CHK(FIF_CONTROL
, RXON_FILTER_CTL2HOST_MSK
);
3363 CHK(FIF_BCN_PRBRESP_PROMISC
, RXON_FILTER_BCON_AWARE_MSK
);
3367 mutex_lock(&priv
->mutex
);
3369 ctx
->staging
.filter_flags
&= ~filter_nand
;
3370 ctx
->staging
.filter_flags
|= filter_or
;
3373 * Not committing directly because hardware can perform a scan,
3374 * but even if hw is ready, committing here breaks for some reason,
3375 * we'll eventually commit the filter flags change anyway.
3378 mutex_unlock(&priv
->mutex
);
3381 * Receiving all multicast frames is always enabled by the
3382 * default flags setup in iwl_legacy_connection_init_rx_config()
3383 * since we currently do not support programming multicast
3384 * filters into the device.
3386 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
3387 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
3391 /*****************************************************************************
3395 *****************************************************************************/
3397 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
3400 * The following adds a new attribute to the sysfs representation
3401 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3402 * used for controlling the debug level.
3404 * See the level definitions in iwl for details.
3406 * The debug_level being managed using sysfs below is a per device debug
3407 * level that is used instead of the global debug level if it (the per
3408 * device debug level) is set.
3410 static ssize_t
iwl3945_show_debug_level(struct device
*d
,
3411 struct device_attribute
*attr
, char *buf
)
3413 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3414 return sprintf(buf
, "0x%08X\n", iwl_legacy_get_debug_level(priv
));
3416 static ssize_t
iwl3945_store_debug_level(struct device
*d
,
3417 struct device_attribute
*attr
,
3418 const char *buf
, size_t count
)
3420 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3424 ret
= strict_strtoul(buf
, 0, &val
);
3426 IWL_INFO(priv
, "%s is not in hex or decimal form.\n", buf
);
3428 priv
->debug_level
= val
;
3429 if (iwl_legacy_alloc_traffic_mem(priv
))
3431 "Not enough memory to generate traffic log\n");
3433 return strnlen(buf
, count
);
3436 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
3437 iwl3945_show_debug_level
, iwl3945_store_debug_level
);
3439 #endif /* CONFIG_IWLWIFI_LEGACY_DEBUG */
3441 static ssize_t
iwl3945_show_temperature(struct device
*d
,
3442 struct device_attribute
*attr
, char *buf
)
3444 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3446 if (!iwl_legacy_is_alive(priv
))
3449 return sprintf(buf
, "%d\n", iwl3945_hw_get_temperature(priv
));
3452 static DEVICE_ATTR(temperature
, S_IRUGO
, iwl3945_show_temperature
, NULL
);
3454 static ssize_t
iwl3945_show_tx_power(struct device
*d
,
3455 struct device_attribute
*attr
, char *buf
)
3457 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3458 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
3461 static ssize_t
iwl3945_store_tx_power(struct device
*d
,
3462 struct device_attribute
*attr
,
3463 const char *buf
, size_t count
)
3465 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3466 char *p
= (char *)buf
;
3469 val
= simple_strtoul(p
, &p
, 10);
3471 IWL_INFO(priv
, ": %s is not in decimal form.\n", buf
);
3473 iwl3945_hw_reg_set_txpower(priv
, val
);
3478 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, iwl3945_show_tx_power
, iwl3945_store_tx_power
);
3480 static ssize_t
iwl3945_show_flags(struct device
*d
,
3481 struct device_attribute
*attr
, char *buf
)
3483 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3484 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3486 return sprintf(buf
, "0x%04X\n", ctx
->active
.flags
);
3489 static ssize_t
iwl3945_store_flags(struct device
*d
,
3490 struct device_attribute
*attr
,
3491 const char *buf
, size_t count
)
3493 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3494 u32 flags
= simple_strtoul(buf
, NULL
, 0);
3495 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3497 mutex_lock(&priv
->mutex
);
3498 if (le32_to_cpu(ctx
->staging
.flags
) != flags
) {
3499 /* Cancel any currently running scans... */
3500 if (iwl_legacy_scan_cancel_timeout(priv
, 100))
3501 IWL_WARN(priv
, "Could not cancel scan.\n");
3503 IWL_DEBUG_INFO(priv
, "Committing rxon.flags = 0x%04X\n",
3505 ctx
->staging
.flags
= cpu_to_le32(flags
);
3506 iwl3945_commit_rxon(priv
, ctx
);
3509 mutex_unlock(&priv
->mutex
);
3514 static DEVICE_ATTR(flags
, S_IWUSR
| S_IRUGO
, iwl3945_show_flags
, iwl3945_store_flags
);
3516 static ssize_t
iwl3945_show_filter_flags(struct device
*d
,
3517 struct device_attribute
*attr
, char *buf
)
3519 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3520 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3522 return sprintf(buf
, "0x%04X\n",
3523 le32_to_cpu(ctx
->active
.filter_flags
));
3526 static ssize_t
iwl3945_store_filter_flags(struct device
*d
,
3527 struct device_attribute
*attr
,
3528 const char *buf
, size_t count
)
3530 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3531 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3532 u32 filter_flags
= simple_strtoul(buf
, NULL
, 0);
3534 mutex_lock(&priv
->mutex
);
3535 if (le32_to_cpu(ctx
->staging
.filter_flags
) != filter_flags
) {
3536 /* Cancel any currently running scans... */
3537 if (iwl_legacy_scan_cancel_timeout(priv
, 100))
3538 IWL_WARN(priv
, "Could not cancel scan.\n");
3540 IWL_DEBUG_INFO(priv
, "Committing rxon.filter_flags = "
3541 "0x%04X\n", filter_flags
);
3542 ctx
->staging
.filter_flags
=
3543 cpu_to_le32(filter_flags
);
3544 iwl3945_commit_rxon(priv
, ctx
);
3547 mutex_unlock(&priv
->mutex
);
3552 static DEVICE_ATTR(filter_flags
, S_IWUSR
| S_IRUGO
, iwl3945_show_filter_flags
,
3553 iwl3945_store_filter_flags
);
3555 static ssize_t
iwl3945_show_measurement(struct device
*d
,
3556 struct device_attribute
*attr
, char *buf
)
3558 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3559 struct iwl_spectrum_notification measure_report
;
3560 u32 size
= sizeof(measure_report
), len
= 0, ofs
= 0;
3561 u8
*data
= (u8
*)&measure_report
;
3562 unsigned long flags
;
3564 spin_lock_irqsave(&priv
->lock
, flags
);
3565 if (!(priv
->measurement_status
& MEASUREMENT_READY
)) {
3566 spin_unlock_irqrestore(&priv
->lock
, flags
);
3569 memcpy(&measure_report
, &priv
->measure_report
, size
);
3570 priv
->measurement_status
= 0;
3571 spin_unlock_irqrestore(&priv
->lock
, flags
);
3573 while (size
&& (PAGE_SIZE
- len
)) {
3574 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
3575 PAGE_SIZE
- len
, 1);
3577 if (PAGE_SIZE
- len
)
3581 size
-= min(size
, 16U);
3587 static ssize_t
iwl3945_store_measurement(struct device
*d
,
3588 struct device_attribute
*attr
,
3589 const char *buf
, size_t count
)
3591 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3592 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3593 struct ieee80211_measurement_params params
= {
3594 .channel
= le16_to_cpu(ctx
->active
.channel
),
3595 .start_time
= cpu_to_le64(priv
->_3945
.last_tsf
),
3596 .duration
= cpu_to_le16(1),
3598 u8 type
= IWL_MEASURE_BASIC
;
3604 strncpy(buffer
, buf
, min(sizeof(buffer
), count
));
3605 channel
= simple_strtoul(p
, NULL
, 0);
3607 params
.channel
= channel
;
3610 while (*p
&& *p
!= ' ')
3613 type
= simple_strtoul(p
+ 1, NULL
, 0);
3616 IWL_DEBUG_INFO(priv
, "Invoking measurement of type %d on "
3617 "channel %d (for '%s')\n", type
, params
.channel
, buf
);
3618 iwl3945_get_measurement(priv
, ¶ms
, type
);
3623 static DEVICE_ATTR(measurement
, S_IRUSR
| S_IWUSR
,
3624 iwl3945_show_measurement
, iwl3945_store_measurement
);
3626 static ssize_t
iwl3945_store_retry_rate(struct device
*d
,
3627 struct device_attribute
*attr
,
3628 const char *buf
, size_t count
)
3630 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3632 priv
->retry_rate
= simple_strtoul(buf
, NULL
, 0);
3633 if (priv
->retry_rate
<= 0)
3634 priv
->retry_rate
= 1;
3639 static ssize_t
iwl3945_show_retry_rate(struct device
*d
,
3640 struct device_attribute
*attr
, char *buf
)
3642 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3643 return sprintf(buf
, "%d", priv
->retry_rate
);
3646 static DEVICE_ATTR(retry_rate
, S_IWUSR
| S_IRUSR
, iwl3945_show_retry_rate
,
3647 iwl3945_store_retry_rate
);
3650 static ssize_t
iwl3945_show_channels(struct device
*d
,
3651 struct device_attribute
*attr
, char *buf
)
3653 /* all this shit doesn't belong into sysfs anyway */
3657 static DEVICE_ATTR(channels
, S_IRUSR
, iwl3945_show_channels
, NULL
);
3659 static ssize_t
iwl3945_show_antenna(struct device
*d
,
3660 struct device_attribute
*attr
, char *buf
)
3662 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3664 if (!iwl_legacy_is_alive(priv
))
3667 return sprintf(buf
, "%d\n", iwl3945_mod_params
.antenna
);
3670 static ssize_t
iwl3945_store_antenna(struct device
*d
,
3671 struct device_attribute
*attr
,
3672 const char *buf
, size_t count
)
3674 struct iwl_priv
*priv __maybe_unused
= dev_get_drvdata(d
);
3680 if (sscanf(buf
, "%1i", &ant
) != 1) {
3681 IWL_DEBUG_INFO(priv
, "not in hex or decimal form.\n");
3685 if ((ant
>= 0) && (ant
<= 2)) {
3686 IWL_DEBUG_INFO(priv
, "Setting antenna select to %d.\n", ant
);
3687 iwl3945_mod_params
.antenna
= (enum iwl3945_antenna
)ant
;
3689 IWL_DEBUG_INFO(priv
, "Bad antenna select value %d.\n", ant
);
3695 static DEVICE_ATTR(antenna
, S_IWUSR
| S_IRUGO
, iwl3945_show_antenna
, iwl3945_store_antenna
);
3697 static ssize_t
iwl3945_show_status(struct device
*d
,
3698 struct device_attribute
*attr
, char *buf
)
3700 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3701 if (!iwl_legacy_is_alive(priv
))
3703 return sprintf(buf
, "0x%08x\n", (int)priv
->status
);
3706 static DEVICE_ATTR(status
, S_IRUGO
, iwl3945_show_status
, NULL
);
3708 static ssize_t
iwl3945_dump_error_log(struct device
*d
,
3709 struct device_attribute
*attr
,
3710 const char *buf
, size_t count
)
3712 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3713 char *p
= (char *)buf
;
3716 iwl3945_dump_nic_error_log(priv
);
3718 return strnlen(buf
, count
);
3721 static DEVICE_ATTR(dump_errors
, S_IWUSR
, NULL
, iwl3945_dump_error_log
);
3723 /*****************************************************************************
3725 * driver setup and tear down
3727 *****************************************************************************/
3729 static void iwl3945_setup_deferred_work(struct iwl_priv
*priv
)
3731 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3733 init_waitqueue_head(&priv
->wait_command_queue
);
3735 INIT_WORK(&priv
->restart
, iwl3945_bg_restart
);
3736 INIT_WORK(&priv
->rx_replenish
, iwl3945_bg_rx_replenish
);
3737 INIT_DELAYED_WORK(&priv
->init_alive_start
, iwl3945_bg_init_alive_start
);
3738 INIT_DELAYED_WORK(&priv
->alive_start
, iwl3945_bg_alive_start
);
3739 INIT_DELAYED_WORK(&priv
->_3945
.rfkill_poll
, iwl3945_rfkill_poll
);
3741 iwl_legacy_setup_scan_deferred_work(priv
);
3743 iwl3945_hw_setup_deferred_work(priv
);
3745 init_timer(&priv
->watchdog
);
3746 priv
->watchdog
.data
= (unsigned long)priv
;
3747 priv
->watchdog
.function
= iwl_legacy_bg_watchdog
;
3749 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3750 iwl3945_irq_tasklet
, (unsigned long)priv
);
3753 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
)
3755 iwl3945_hw_cancel_deferred_work(priv
);
3757 cancel_delayed_work_sync(&priv
->init_alive_start
);
3758 cancel_delayed_work(&priv
->alive_start
);
3760 iwl_legacy_cancel_scan_deferred_work(priv
);
3763 static struct attribute
*iwl3945_sysfs_entries
[] = {
3764 &dev_attr_antenna
.attr
,
3765 &dev_attr_channels
.attr
,
3766 &dev_attr_dump_errors
.attr
,
3767 &dev_attr_flags
.attr
,
3768 &dev_attr_filter_flags
.attr
,
3769 &dev_attr_measurement
.attr
,
3770 &dev_attr_retry_rate
.attr
,
3771 &dev_attr_status
.attr
,
3772 &dev_attr_temperature
.attr
,
3773 &dev_attr_tx_power
.attr
,
3774 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
3775 &dev_attr_debug_level
.attr
,
3780 static struct attribute_group iwl3945_attribute_group
= {
3781 .name
= NULL
, /* put in device directory */
3782 .attrs
= iwl3945_sysfs_entries
,
3785 struct ieee80211_ops iwl3945_hw_ops
= {
3786 .tx
= iwl3945_mac_tx
,
3787 .start
= iwl3945_mac_start
,
3788 .stop
= iwl3945_mac_stop
,
3789 .add_interface
= iwl_legacy_mac_add_interface
,
3790 .remove_interface
= iwl_legacy_mac_remove_interface
,
3791 .change_interface
= iwl_legacy_mac_change_interface
,
3792 .config
= iwl_legacy_mac_config
,
3793 .configure_filter
= iwl3945_configure_filter
,
3794 .set_key
= iwl3945_mac_set_key
,
3795 .conf_tx
= iwl_legacy_mac_conf_tx
,
3796 .reset_tsf
= iwl_legacy_mac_reset_tsf
,
3797 .bss_info_changed
= iwl_legacy_mac_bss_info_changed
,
3798 .hw_scan
= iwl_legacy_mac_hw_scan
,
3799 .sta_add
= iwl3945_mac_sta_add
,
3800 .sta_remove
= iwl_legacy_mac_sta_remove
,
3801 .tx_last_beacon
= iwl_legacy_mac_tx_last_beacon
,
3804 static int iwl3945_init_drv(struct iwl_priv
*priv
)
3807 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
3809 priv
->retry_rate
= 1;
3810 priv
->beacon_skb
= NULL
;
3812 spin_lock_init(&priv
->sta_lock
);
3813 spin_lock_init(&priv
->hcmd_lock
);
3815 INIT_LIST_HEAD(&priv
->free_frames
);
3817 mutex_init(&priv
->mutex
);
3819 priv
->ieee_channels
= NULL
;
3820 priv
->ieee_rates
= NULL
;
3821 priv
->band
= IEEE80211_BAND_2GHZ
;
3823 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3824 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
3826 /* initialize force reset */
3827 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
3828 IWL_DELAY_NEXT_FORCE_RF_RESET
;
3829 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
3830 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
3832 if (eeprom
->version
< EEPROM_3945_EEPROM_VERSION
) {
3833 IWL_WARN(priv
, "Unsupported EEPROM version: 0x%04X\n",
3838 ret
= iwl_legacy_init_channel_map(priv
);
3840 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3844 /* Set up txpower settings in driver for all channels */
3845 if (iwl3945_txpower_set_from_eeprom(priv
)) {
3847 goto err_free_channel_map
;
3850 ret
= iwl_legacy_init_geos(priv
);
3852 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3853 goto err_free_channel_map
;
3855 iwl3945_init_hw_rates(priv
, priv
->ieee_rates
);
3859 err_free_channel_map
:
3860 iwl_legacy_free_channel_map(priv
);
3865 #define IWL3945_MAX_PROBE_REQUEST 200
3867 static int iwl3945_setup_mac(struct iwl_priv
*priv
)
3870 struct ieee80211_hw
*hw
= priv
->hw
;
3872 hw
->rate_control_algorithm
= "iwl-3945-rs";
3873 hw
->sta_data_size
= sizeof(struct iwl3945_sta_priv
);
3874 hw
->vif_data_size
= sizeof(struct iwl_vif_priv
);
3876 /* Tell mac80211 our characteristics */
3877 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
3878 IEEE80211_HW_SPECTRUM_MGMT
;
3880 hw
->wiphy
->interface_modes
=
3881 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
;
3883 hw
->wiphy
->flags
|= WIPHY_FLAG_CUSTOM_REGULATORY
|
3884 WIPHY_FLAG_DISABLE_BEACON_HINTS
|
3885 WIPHY_FLAG_IBSS_RSN
;
3887 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX_3945
;
3888 /* we create the 802.11 header and a zero-length SSID element */
3889 hw
->wiphy
->max_scan_ie_len
= IWL3945_MAX_PROBE_REQUEST
- 24 - 2;
3891 /* Default value; 4 EDCA QOS priorities */
3894 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
3895 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
3896 &priv
->bands
[IEEE80211_BAND_2GHZ
];
3898 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
3899 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
3900 &priv
->bands
[IEEE80211_BAND_5GHZ
];
3902 iwl_legacy_leds_init(priv
);
3904 ret
= ieee80211_register_hw(priv
->hw
);
3906 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
3909 priv
->mac80211_registered
= 1;
3914 static int iwl3945_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3917 struct iwl_priv
*priv
;
3918 struct ieee80211_hw
*hw
;
3919 struct iwl_cfg
*cfg
= (struct iwl_cfg
*)(ent
->driver_data
);
3920 struct iwl3945_eeprom
*eeprom
;
3921 unsigned long flags
;
3923 /***********************
3924 * 1. Allocating HW data
3925 * ********************/
3927 /* mac80211 allocates memory for this device instance, including
3928 * space for this driver's private structure */
3929 hw
= iwl_legacy_alloc_all(cfg
);
3931 pr_err("Can not allocate network device\n");
3936 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
3938 priv
->cmd_queue
= IWL39_CMD_QUEUE_NUM
;
3940 /* 3945 has only one valid context */
3941 priv
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
3943 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
3944 priv
->contexts
[i
].ctxid
= i
;
3946 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
3947 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
3948 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
3949 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
3950 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
3951 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
3952 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
3953 BIT(NL80211_IFTYPE_STATION
) |
3954 BIT(NL80211_IFTYPE_ADHOC
);
3955 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
3956 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
3957 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
3960 * Disabling hardware scan means that mac80211 will perform scans
3961 * "the hard way", rather than using device's scan.
3963 if (iwl3945_mod_params
.disable_hw_scan
) {
3964 IWL_DEBUG_INFO(priv
, "Disabling hw_scan\n");
3965 iwl3945_hw_ops
.hw_scan
= NULL
;
3968 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3970 priv
->pci_dev
= pdev
;
3971 priv
->inta_mask
= CSR_INI_SET_MASK
;
3973 if (iwl_legacy_alloc_traffic_mem(priv
))
3974 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3976 /***************************
3977 * 2. Initializing PCI bus
3978 * *************************/
3979 pci_disable_link_state(pdev
, PCIE_LINK_STATE_L0S
| PCIE_LINK_STATE_L1
|
3980 PCIE_LINK_STATE_CLKPM
);
3982 if (pci_enable_device(pdev
)) {
3984 goto out_ieee80211_free_hw
;
3987 pci_set_master(pdev
);
3989 err
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
3991 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
3993 IWL_WARN(priv
, "No suitable DMA available.\n");
3994 goto out_pci_disable_device
;
3997 pci_set_drvdata(pdev
, priv
);
3998 err
= pci_request_regions(pdev
, DRV_NAME
);
4000 goto out_pci_disable_device
;
4002 /***********************
4003 * 3. Read REV Register
4004 * ********************/
4005 priv
->hw_base
= pci_iomap(pdev
, 0, 0);
4006 if (!priv
->hw_base
) {
4008 goto out_pci_release_regions
;
4011 IWL_DEBUG_INFO(priv
, "pci_resource_len = 0x%08llx\n",
4012 (unsigned long long) pci_resource_len(pdev
, 0));
4013 IWL_DEBUG_INFO(priv
, "pci_resource_base = %p\n", priv
->hw_base
);
4015 /* We disable the RETRY_TIMEOUT register (0x41) to keep
4016 * PCI Tx retries from interfering with C3 CPU state */
4017 pci_write_config_byte(pdev
, 0x41, 0x00);
4019 /* these spin locks will be used in apm_ops.init and EEPROM access
4020 * we should init now
4022 spin_lock_init(&priv
->reg_lock
);
4023 spin_lock_init(&priv
->lock
);
4026 * stop and reset the on-board processor just in case it is in a
4027 * strange state ... like being left stranded by a primary kernel
4028 * and this is now the kdump kernel trying to start up
4030 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
4032 /***********************
4034 * ********************/
4036 /* Read the EEPROM */
4037 err
= iwl_legacy_eeprom_init(priv
);
4039 IWL_ERR(priv
, "Unable to init EEPROM\n");
4042 /* MAC Address location in EEPROM same for 3945/4965 */
4043 eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
4044 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", eeprom
->mac_address
);
4045 SET_IEEE80211_PERM_ADDR(priv
->hw
, eeprom
->mac_address
);
4047 /***********************
4048 * 5. Setup HW Constants
4049 * ********************/
4050 /* Device-specific setup */
4051 if (iwl3945_hw_set_hw_params(priv
)) {
4052 IWL_ERR(priv
, "failed to set hw settings\n");
4053 goto out_eeprom_free
;
4056 /***********************
4058 * ********************/
4060 err
= iwl3945_init_drv(priv
);
4062 IWL_ERR(priv
, "initializing driver failed\n");
4063 goto out_unset_hw_params
;
4066 IWL_INFO(priv
, "Detected Intel Wireless WiFi Link %s\n",
4069 /***********************
4071 * ********************/
4073 spin_lock_irqsave(&priv
->lock
, flags
);
4074 iwl_legacy_disable_interrupts(priv
);
4075 spin_unlock_irqrestore(&priv
->lock
, flags
);
4077 pci_enable_msi(priv
->pci_dev
);
4079 err
= request_irq(priv
->pci_dev
->irq
, iwl_legacy_isr
,
4080 IRQF_SHARED
, DRV_NAME
, priv
);
4082 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->pci_dev
->irq
);
4083 goto out_disable_msi
;
4086 err
= sysfs_create_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4088 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
4089 goto out_release_irq
;
4092 iwl_legacy_set_rxon_channel(priv
,
4093 &priv
->bands
[IEEE80211_BAND_2GHZ
].channels
[5],
4094 &priv
->contexts
[IWL_RXON_CTX_BSS
]);
4095 iwl3945_setup_deferred_work(priv
);
4096 iwl3945_setup_rx_handlers(priv
);
4097 iwl_legacy_power_initialize(priv
);
4099 /*********************************
4100 * 8. Setup and Register mac80211
4101 * *******************************/
4103 iwl_legacy_enable_interrupts(priv
);
4105 err
= iwl3945_setup_mac(priv
);
4107 goto out_remove_sysfs
;
4109 err
= iwl_legacy_dbgfs_register(priv
, DRV_NAME
);
4111 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
4113 /* Start monitoring the killswitch */
4114 queue_delayed_work(priv
->workqueue
, &priv
->_3945
.rfkill_poll
,
4120 destroy_workqueue(priv
->workqueue
);
4121 priv
->workqueue
= NULL
;
4122 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4124 free_irq(priv
->pci_dev
->irq
, priv
);
4126 pci_disable_msi(priv
->pci_dev
);
4127 iwl_legacy_free_geos(priv
);
4128 iwl_legacy_free_channel_map(priv
);
4129 out_unset_hw_params
:
4130 iwl3945_unset_hw_params(priv
);
4132 iwl_legacy_eeprom_free(priv
);
4134 pci_iounmap(pdev
, priv
->hw_base
);
4135 out_pci_release_regions
:
4136 pci_release_regions(pdev
);
4137 out_pci_disable_device
:
4138 pci_set_drvdata(pdev
, NULL
);
4139 pci_disable_device(pdev
);
4140 out_ieee80211_free_hw
:
4141 iwl_legacy_free_traffic_mem(priv
);
4142 ieee80211_free_hw(priv
->hw
);
4147 static void __devexit
iwl3945_pci_remove(struct pci_dev
*pdev
)
4149 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
4150 unsigned long flags
;
4155 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
4157 iwl_legacy_dbgfs_unregister(priv
);
4159 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
4161 iwl_legacy_leds_exit(priv
);
4163 if (priv
->mac80211_registered
) {
4164 ieee80211_unregister_hw(priv
->hw
);
4165 priv
->mac80211_registered
= 0;
4171 * Make sure device is reset to low power before unloading driver.
4172 * This may be redundant with iwl_down(), but there are paths to
4173 * run iwl_down() without calling apm_ops.stop(), and there are
4174 * paths to avoid running iwl_down() at all before leaving driver.
4175 * This (inexpensive) call *makes sure* device is reset.
4177 iwl_legacy_apm_stop(priv
);
4179 /* make sure we flush any pending irq or
4180 * tasklet for the driver
4182 spin_lock_irqsave(&priv
->lock
, flags
);
4183 iwl_legacy_disable_interrupts(priv
);
4184 spin_unlock_irqrestore(&priv
->lock
, flags
);
4186 iwl3945_synchronize_irq(priv
);
4188 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4190 cancel_delayed_work_sync(&priv
->_3945
.rfkill_poll
);
4192 iwl3945_dealloc_ucode_pci(priv
);
4195 iwl3945_rx_queue_free(priv
, &priv
->rxq
);
4196 iwl3945_hw_txq_ctx_free(priv
);
4198 iwl3945_unset_hw_params(priv
);
4200 /*netif_stop_queue(dev); */
4201 flush_workqueue(priv
->workqueue
);
4203 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
4204 * priv->workqueue... so we can't take down the workqueue
4206 destroy_workqueue(priv
->workqueue
);
4207 priv
->workqueue
= NULL
;
4208 iwl_legacy_free_traffic_mem(priv
);
4210 free_irq(pdev
->irq
, priv
);
4211 pci_disable_msi(pdev
);
4213 pci_iounmap(pdev
, priv
->hw_base
);
4214 pci_release_regions(pdev
);
4215 pci_disable_device(pdev
);
4216 pci_set_drvdata(pdev
, NULL
);
4218 iwl_legacy_free_channel_map(priv
);
4219 iwl_legacy_free_geos(priv
);
4220 kfree(priv
->scan_cmd
);
4221 if (priv
->beacon_skb
)
4222 dev_kfree_skb(priv
->beacon_skb
);
4224 ieee80211_free_hw(priv
->hw
);
4228 /*****************************************************************************
4230 * driver and module entry point
4232 *****************************************************************************/
4234 static struct pci_driver iwl3945_driver
= {
4236 .id_table
= iwl3945_hw_card_ids
,
4237 .probe
= iwl3945_pci_probe
,
4238 .remove
= __devexit_p(iwl3945_pci_remove
),
4239 .driver
.pm
= IWL_LEGACY_PM_OPS
,
4242 static int __init
iwl3945_init(void)
4246 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
4247 pr_info(DRV_COPYRIGHT
"\n");
4249 ret
= iwl3945_rate_control_register();
4251 pr_err("Unable to register rate control algorithm: %d\n", ret
);
4255 ret
= pci_register_driver(&iwl3945_driver
);
4257 pr_err("Unable to initialize PCI module\n");
4258 goto error_register
;
4264 iwl3945_rate_control_unregister();
4268 static void __exit
iwl3945_exit(void)
4270 pci_unregister_driver(&iwl3945_driver
);
4271 iwl3945_rate_control_unregister();
4274 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX
));
4276 module_param_named(antenna
, iwl3945_mod_params
.antenna
, int, S_IRUGO
);
4277 MODULE_PARM_DESC(antenna
, "select antenna (1=Main, 2=Aux, default 0 [both])");
4278 module_param_named(swcrypto
, iwl3945_mod_params
.sw_crypto
, int, S_IRUGO
);
4279 MODULE_PARM_DESC(swcrypto
,
4280 "using software crypto (default 1 [software])");
4281 module_param_named(disable_hw_scan
, iwl3945_mod_params
.disable_hw_scan
,
4283 MODULE_PARM_DESC(disable_hw_scan
, "disable hardware scanning (default 1)");
4284 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
4285 module_param_named(debug
, iwlegacy_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
4286 MODULE_PARM_DESC(debug
, "debug output mask");
4288 module_param_named(fw_restart
, iwl3945_mod_params
.restart_fw
, int, S_IRUGO
);
4289 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
4291 module_exit(iwl3945_exit
);
4292 module_init(iwl3945_init
);