drivers/media/rc/ite-cir.c

   1 /*
   2  * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
   3  *
   4  * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of the
   9  * License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  14  * General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  19  * USA.
  20  *
  21  * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the
  22  * skeleton provided by the nuvoton-cir driver.
  23  *
  24  * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues
  25  * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus
  26  * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards
  27  * <jimbo-lirc@edwardsclan.net>.
  28  *
  29  * The lirc_ite8709 driver was written by Grégory Lardière
  30  * <spmf2004-lirc@yahoo.fr> in 2008.
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/pnp.h>
  36 #include <linux/io.h>
  37 #include <linux/interrupt.h>
  38 #include <linux/sched.h>
  39 #include <linux/delay.h>
  40 #include <linux/slab.h>
  41 #include <linux/input.h>
  42 #include <linux/bitops.h>
  43 #include <media/rc-core.h>
  44 #include <linux/pci_ids.h>
  45
  46 #include "ite-cir.h"
  47
  48 /* module parameters */
  49
  50 /* debug level */
  51 static int debug;
  52 module_param(debug, int, S_IRUGO | S_IWUSR);
  53 MODULE_PARM_DESC(debug, "Enable debugging output");
  54
  55 /* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
  56 static int rx_low_carrier_freq;
  57 module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
  58 MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, "
  59                  "0 for no RX demodulation");
  60
  61 /* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
  62 static int rx_high_carrier_freq;
  63 module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
  64 MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, "
  65                  "Hz, 0 for no RX demodulation");
  66
  67 /* override tx carrier frequency */
  68 static int tx_carrier_freq;
  69 module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR);
  70 MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz");
  71
  72 /* override tx duty cycle */
  73 static int tx_duty_cycle;
  74 module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR);
  75 MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100");
  76
  77 /* override default sample period */
  78 static long sample_period;
  79 module_param(sample_period, long, S_IRUGO | S_IWUSR);
  80 MODULE_PARM_DESC(sample_period, "Override carrier sample period, us");
  81
  82 /* override detected model id */
  83 static int model_number = -1;
  84 module_param(model_number, int, S_IRUGO | S_IWUSR);
  85 MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect");
  86
  87
  88 /* HW-independent code functions */
  89
  90 /* check whether carrier frequency is high frequency */
  91 static inline bool ite_is_high_carrier_freq(unsigned int freq)
  92 {
  93         return freq >= ITE_HCF_MIN_CARRIER_FREQ;
  94 }
  95
  96 /* get the bits required to program the carrier frequency in CFQ bits,
  97  * unshifted */
  98 static u8 ite_get_carrier_freq_bits(unsigned int freq)
  99 {
 100         if (ite_is_high_carrier_freq(freq)) {
 101                 if (freq < 425000)
 102                         return ITE_CFQ_400;
 103
 104                 else if (freq < 465000)
 105                         return ITE_CFQ_450;
 106
 107                 else if (freq < 490000)
 108                         return ITE_CFQ_480;
 109
 110                 else
 111                         return ITE_CFQ_500;
 112         } else {
 113                         /* trim to limits */
 114                 if (freq < ITE_LCF_MIN_CARRIER_FREQ)
 115                         freq = ITE_LCF_MIN_CARRIER_FREQ;
 116                 if (freq > ITE_LCF_MAX_CARRIER_FREQ)
 117                         freq = ITE_LCF_MAX_CARRIER_FREQ;
 118
 119                 /* convert to kHz and subtract the base freq */
 120                 freq =
 121                     DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ,
 122                                       1000);
 123
 124                 return (u8) freq;
 125         }
 126 }
 127
 128 /* get the bits required to program the pulse with in TXMPW */
 129 static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle)
 130 {
 131         unsigned long period_ns, on_ns;
 132
 133         /* sanitize freq into range */
 134         if (freq < ITE_LCF_MIN_CARRIER_FREQ)
 135                 freq = ITE_LCF_MIN_CARRIER_FREQ;
 136         if (freq > ITE_HCF_MAX_CARRIER_FREQ)
 137                 freq = ITE_HCF_MAX_CARRIER_FREQ;
 138
 139         period_ns = 1000000000UL / freq;
 140         on_ns = period_ns * duty_cycle / 100;
 141
 142         if (ite_is_high_carrier_freq(freq)) {
 143                 if (on_ns < 750)
 144                         return ITE_TXMPW_A;
 145
 146                 else if (on_ns < 850)
 147                         return ITE_TXMPW_B;
 148
 149                 else if (on_ns < 950)
 150                         return ITE_TXMPW_C;
 151
 152                 else if (on_ns < 1080)
 153                         return ITE_TXMPW_D;
 154
 155                 else
 156                         return ITE_TXMPW_E;
 157         } else {
 158                 if (on_ns < 6500)
 159                         return ITE_TXMPW_A;
 160
 161                 else if (on_ns < 7850)
 162                         return ITE_TXMPW_B;
 163
 164                 else if (on_ns < 9650)
 165                         return ITE_TXMPW_C;
 166
 167                 else if (on_ns < 11950)
 168                         return ITE_TXMPW_D;
 169
 170                 else
 171                         return ITE_TXMPW_E;
 172         }
 173 }
 174
 175 /* decode raw bytes as received by the hardware, and push them to the ir-core
 176  * layer */
 177 static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
 178                              length)
 179 {
 180         u32 sample_period;
 181         unsigned long *ldata;
 182         unsigned int next_one, next_zero, size;
 183         DEFINE_IR_RAW_EVENT(ev);
 184
 185         if (length == 0)
 186                 return;
 187
 188         sample_period = dev->params.sample_period;
 189         ldata = (unsigned long *)data;
 190         size = length << 3;
 191         next_one = find_next_bit_le(ldata, size, 0);
 192         if (next_one > 0) {
 193                 ev.pulse = true;
 194                 ev.duration =
 195                     ITE_BITS_TO_NS(next_one, sample_period);
 196                 ir_raw_event_store_with_filter(dev->rdev, &ev);
 197         }
 198
 199         while (next_one < size) {
 200                 next_zero = find_next_zero_bit_le(ldata, size, next_one + 1);
 201                 ev.pulse = false;
 202                 ev.duration = ITE_BITS_TO_NS(next_zero - next_one, sample_period);
 203                 ir_raw_event_store_with_filter(dev->rdev, &ev);
 204
 205                 if (next_zero < size) {
 206                         next_one =
 207                             find_next_bit_le(ldata,
 208                                                      size,
 209                                                      next_zero + 1);
 210                         ev.pulse = true;
 211                         ev.duration =
 212                             ITE_BITS_TO_NS(next_one - next_zero,
 213                                            sample_period);
 214                         ir_raw_event_store_with_filter
 215                             (dev->rdev, &ev);
 216                 } else
 217                         next_one = size;
 218         }
 219
 220         ir_raw_event_handle(dev->rdev);
 221
 222         ite_dbg_verbose("decoded %d bytes.", length);
 223 }
 224
 225 /* set all the rx/tx carrier parameters; this must be called with the device
 226  * spinlock held */
 227 static void ite_set_carrier_params(struct ite_dev *dev)
 228 {
 229         unsigned int freq, low_freq, high_freq;
 230         int allowance;
 231         bool use_demodulator;
 232         bool for_tx = dev->transmitting;
 233
 234         ite_dbg("%s called", __func__);
 235
 236         if (for_tx) {
 237                 /* we don't need no stinking calculations */
 238                 freq = dev->params.tx_carrier_freq;
 239                 allowance = ITE_RXDCR_DEFAULT;
 240                 use_demodulator = false;
 241         } else {
 242                 low_freq = dev->params.rx_low_carrier_freq;
 243                 high_freq = dev->params.rx_high_carrier_freq;
 244
 245                 if (low_freq == 0) {
 246                         /* don't demodulate */
 247                         freq =
 248                         ITE_DEFAULT_CARRIER_FREQ;
 249                         allowance = ITE_RXDCR_DEFAULT;
 250                         use_demodulator = false;
 251                 } else {
 252                         /* calculate the middle freq */
 253                         freq = (low_freq + high_freq) / 2;
 254
 255                         /* calculate the allowance */
 256                         allowance =
 257                             DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq),
 258                                               ITE_RXDCR_PER_10000_STEP
 259                                               * (high_freq + low_freq));
 260
 261                         if (allowance < 1)
 262                                 allowance = 1;
 263
 264                         if (allowance > ITE_RXDCR_MAX)
 265                                 allowance = ITE_RXDCR_MAX;
 266                 }
 267         }
 268
 269         /* set the carrier parameters in a device-dependent way */
 270         dev->params.set_carrier_params(dev, ite_is_high_carrier_freq(freq),
 271                  use_demodulator, ite_get_carrier_freq_bits(freq), allowance,
 272                  ite_get_pulse_width_bits(freq, dev->params.tx_duty_cycle));
 273 }
 274
 275 /* interrupt service routine for incoming and outgoing CIR data */
 276 static irqreturn_t ite_cir_isr(int irq, void *data)
 277 {
 278         struct ite_dev *dev = data;
 279         unsigned long flags;
 280         irqreturn_t ret = IRQ_RETVAL(IRQ_NONE);
 281         u8 rx_buf[ITE_RX_FIFO_LEN];
 282         int rx_bytes;
 283         int iflags;
 284
 285         ite_dbg_verbose("%s firing", __func__);
 286
 287         /* grab the spinlock */
 288         spin_lock_irqsave(&dev->lock, flags);
 289
 290         /* read the interrupt flags */
 291         iflags = dev->params.get_irq_causes(dev);
 292
 293         /* check for the receive interrupt */
 294         if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
 295                 /* read the FIFO bytes */
 296                 rx_bytes =
 297                         dev->params.get_rx_bytes(dev, rx_buf,
 298                                              ITE_RX_FIFO_LEN);
 299
 300                 if (rx_bytes > 0) {
 301                         /* drop the spinlock, since the ir-core layer
 302                          * may call us back again through
 303                          * ite_s_idle() */
 304                         spin_unlock_irqrestore(&dev->
 305                                                                          lock,
 306                                                                          flags);
 307
 308                         /* decode the data we've just received */
 309                         ite_decode_bytes(dev, rx_buf,
 310                                                                    rx_bytes);
 311
 312                         /* reacquire the spinlock */
 313                         spin_lock_irqsave(&dev->lock,
 314                                                                     flags);
 315
 316                         /* mark the interrupt as serviced */
 317                         ret = IRQ_RETVAL(IRQ_HANDLED);
 318                 }
 319         } else if (iflags & ITE_IRQ_TX_FIFO) {
 320                 /* FIFO space available interrupt */
 321                 ite_dbg_verbose("got interrupt for TX FIFO");
 322
 323                 /* wake any sleeping transmitter */
 324                 wake_up_interruptible(&dev->tx_queue);
 325
 326                 /* mark the interrupt as serviced */
 327                 ret = IRQ_RETVAL(IRQ_HANDLED);
 328         }
 329
 330         /* drop the spinlock */
 331         spin_unlock_irqrestore(&dev->lock, flags);
 332
 333         ite_dbg_verbose("%s done returning %d", __func__, (int)ret);
 334
 335         return ret;
 336 }
 337
 338 /* set the rx carrier freq range, guess it's in Hz... */
 339 static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32
 340                                     carrier_high)
 341 {
 342         unsigned long flags;
 343         struct ite_dev *dev = rcdev->priv;
 344
 345         spin_lock_irqsave(&dev->lock, flags);
 346         dev->params.rx_low_carrier_freq = carrier_low;
 347         dev->params.rx_high_carrier_freq = carrier_high;
 348         ite_set_carrier_params(dev);
 349         spin_unlock_irqrestore(&dev->lock, flags);
 350
 351         return 0;
 352 }
 353
 354 /* set the tx carrier freq, guess it's in Hz... */
 355 static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
 356 {
 357         unsigned long flags;
 358         struct ite_dev *dev = rcdev->priv;
 359
 360         spin_lock_irqsave(&dev->lock, flags);
 361         dev->params.tx_carrier_freq = carrier;
 362         ite_set_carrier_params(dev);
 363         spin_unlock_irqrestore(&dev->lock, flags);
 364
 365         return 0;
 366 }
 367
 368 /* set the tx duty cycle by controlling the pulse width */
 369 static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
 370 {
 371         unsigned long flags;
 372         struct ite_dev *dev = rcdev->priv;
 373
 374         spin_lock_irqsave(&dev->lock, flags);
 375         dev->params.tx_duty_cycle = duty_cycle;
 376         ite_set_carrier_params(dev);
 377         spin_unlock_irqrestore(&dev->lock, flags);
 378
 379         return 0;
 380 }
 381
 382 /* transmit out IR pulses; what you get here is a batch of alternating
 383  * pulse/space/pulse/space lengths that we should write out completely through
 384  * the FIFO, blocking on a full FIFO */
 385 static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n)
 386 {
 387         unsigned long flags;
 388         struct ite_dev *dev = rcdev->priv;
 389         bool is_pulse = false;
 390         int remaining_us, fifo_avail, fifo_remaining, last_idx = 0;
 391         int max_rle_us, next_rle_us;
 392         int ret = n;
 393         u8 last_sent[ITE_TX_FIFO_LEN];
 394         u8 val;
 395
 396         ite_dbg("%s called", __func__);
 397
 398         /* clear the array just in case */
 399         memset(last_sent, 0, ARRAY_SIZE(last_sent));
 400
 401         spin_lock_irqsave(&dev->lock, flags);
 402
 403         /* let everybody know we're now transmitting */
 404         dev->transmitting = true;
 405
 406         /* and set the carrier values for transmission */
 407         ite_set_carrier_params(dev);
 408
 409         /* calculate how much time we can send in one byte */
 410         max_rle_us =
 411             (ITE_BAUDRATE_DIVISOR * dev->params.sample_period *
 412              ITE_TX_MAX_RLE) / 1000;
 413
 414         /* disable the receiver */
 415         dev->params.disable_rx(dev);
 416
 417         /* this is where we'll begin filling in the FIFO, until it's full.
 418          * then we'll just activate the interrupt, wait for it to wake us up
 419          * again, disable it, continue filling the FIFO... until everything
 420          * has been pushed out */
 421         fifo_avail =
 422             ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
 423
 424         while (n > 0 && dev->in_use) {
 425                 /* transmit the next sample */
 426                 is_pulse = !is_pulse;
 427                 remaining_us = *(txbuf++);
 428                 n--;
 429
 430                 ite_dbg("%s: %ld",
 431                                       ((is_pulse) ? "pulse" : "space"),
 432                                       (long int)
 433                                       remaining_us);
 434
 435                 /* repeat while the pulse is non-zero length */
 436                 while (remaining_us > 0 && dev->in_use) {
 437                         if (remaining_us > max_rle_us)
 438                                 next_rle_us = max_rle_us;
 439
 440                         else
 441                                 next_rle_us = remaining_us;
 442
 443                         remaining_us -= next_rle_us;
 444
 445                         /* check what's the length we have to pump out */
 446                         val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us;
 447
 448                         /* put it into the sent buffer */
 449                         last_sent[last_idx++] = val;
 450                         last_idx &= (ITE_TX_FIFO_LEN);
 451
 452                         /* encode it for 7 bits */
 453                         val = (val - 1) & ITE_TX_RLE_MASK;
 454
 455                         /* take into account pulse/space prefix */
 456                         if (is_pulse)
 457                                 val |= ITE_TX_PULSE;
 458
 459                         else
 460                                 val |= ITE_TX_SPACE;
 461
 462                         /*
 463                          * if we get to 0 available, read again, just in case
 464                          * some other slot got freed
 465                          */
 466                         if (fifo_avail <= 0)
 467                                 fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev);
 468
 469                         /* if it's still full */
 470                         if (fifo_avail <= 0) {
 471                                 /* enable the tx interrupt */
 472                                 dev->params.
 473                                 enable_tx_interrupt(dev);
 474
 475                                 /* drop the spinlock */
 476                                 spin_unlock_irqrestore(&dev->lock, flags);
 477
 478                                 /* wait for the FIFO to empty enough */
 479                                 wait_event_interruptible(dev->tx_queue, (fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev)) >= 8);
 480
 481                                 /* get the spinlock again */
 482                                 spin_lock_irqsave(&dev->lock, flags);
 483
 484                                 /* disable the tx interrupt again. */
 485                                 dev->params.
 486                                 disable_tx_interrupt(dev);
 487                         }
 488
 489                         /* now send the byte through the FIFO */
 490                         dev->params.put_tx_byte(dev, val);
 491                         fifo_avail--;
 492                 }
 493         }
 494
 495         /* wait and don't return until the whole FIFO has been sent out;
 496          * otherwise we could configure the RX carrier params instead of the
 497          * TX ones while the transmission is still being performed! */
 498         fifo_remaining = dev->params.get_tx_used_slots(dev);
 499         remaining_us = 0;
 500         while (fifo_remaining > 0) {
 501                 fifo_remaining--;
 502                 last_idx--;
 503                 last_idx &= (ITE_TX_FIFO_LEN - 1);
 504                 remaining_us += last_sent[last_idx];
 505         }
 506         remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE);
 507
 508         /* drop the spinlock while we sleep */
 509         spin_unlock_irqrestore(&dev->lock, flags);
 510
 511         /* sleep remaining_us microseconds */
 512         mdelay(DIV_ROUND_UP(remaining_us, 1000));
 513
 514         /* reacquire the spinlock */
 515         spin_lock_irqsave(&dev->lock, flags);
 516
 517         /* now we're not transmitting anymore */
 518         dev->transmitting = false;
 519
 520         /* and set the carrier values for reception */
 521         ite_set_carrier_params(dev);
 522
 523         /* reenable the receiver */
 524         if (dev->in_use)
 525                 dev->params.enable_rx(dev);
 526
 527         /* notify transmission end */
 528         wake_up_interruptible(&dev->tx_ended);
 529
 530         spin_unlock_irqrestore(&dev->lock, flags);
 531
 532         return ret;
 533 }
 534
 535 /* idle the receiver if needed */
 536 static void ite_s_idle(struct rc_dev *rcdev, bool enable)
 537 {
 538         unsigned long flags;
 539         struct ite_dev *dev = rcdev->priv;
 540
 541         ite_dbg("%s called", __func__);
 542
 543         if (enable) {
 544                 spin_lock_irqsave(&dev->lock, flags);
 545                 dev->params.idle_rx(dev);
 546                 spin_unlock_irqrestore(&dev->lock, flags);
 547         }
 548 }
 549
 550
 551 /* IT8712F HW-specific functions */
 552
 553 /* retrieve a bitmask of the current causes for a pending interrupt; this may
 554  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
 555  * */
 556 static int it87_get_irq_causes(struct ite_dev *dev)
 557 {
 558         u8 iflags;
 559         int ret = 0;
 560
 561         ite_dbg("%s called", __func__);
 562
 563         /* read the interrupt flags */
 564         iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II;
 565
 566         switch (iflags) {
 567         case IT87_II_RXDS:
 568                 ret = ITE_IRQ_RX_FIFO;
 569                 break;
 570         case IT87_II_RXFO:
 571                 ret = ITE_IRQ_RX_FIFO_OVERRUN;
 572                 break;
 573         case IT87_II_TXLDL:
 574                 ret = ITE_IRQ_TX_FIFO;
 575                 break;
 576         }
 577
 578         return ret;
 579 }
 580
 581 /* set the carrier parameters; to be called with the spinlock held */
 582 static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq,
 583                                     bool use_demodulator,
 584                                     u8 carrier_freq_bits, u8 allowance_bits,
 585                                     u8 pulse_width_bits)
 586 {
 587         u8 val;
 588
 589         ite_dbg("%s called", __func__);
 590
 591         /* program the RCR register */
 592         val = inb(dev->cir_addr + IT87_RCR)
 593                 & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR);
 594
 595         if (high_freq)
 596                 val |= IT87_HCFS;
 597
 598         if (use_demodulator)
 599                 val |= IT87_RXEND;
 600
 601         val |= allowance_bits;
 602
 603         outb(val, dev->cir_addr + IT87_RCR);
 604
 605         /* program the TCR2 register */
 606         outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits,
 607                 dev->cir_addr + IT87_TCR2);
 608 }
 609
 610 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
 611  * held */
 612 static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
 613 {
 614         int fifo, read = 0;
 615
 616         ite_dbg("%s called", __func__);
 617
 618         /* read how many bytes are still in the FIFO */
 619         fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC;
 620
 621         while (fifo > 0 && buf_size > 0) {
 622                 *(buf++) = inb(dev->cir_addr + IT87_DR);
 623                 fifo--;
 624                 read++;
 625                 buf_size--;
 626         }
 627
 628         return read;
 629 }
 630
 631 /* return how many bytes are still in the FIFO; this will be called
 632  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
 633  * empty; let's expect this won't be a problem */
 634 static int it87_get_tx_used_slots(struct ite_dev *dev)
 635 {
 636         ite_dbg("%s called", __func__);
 637
 638         return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC;
 639 }
 640
 641 /* put a byte to the TX fifo; this should be called with the spinlock held */
 642 static void it87_put_tx_byte(struct ite_dev *dev, u8 value)
 643 {
 644         outb(value, dev->cir_addr + IT87_DR);
 645 }
 646
 647 /* idle the receiver so that we won't receive samples until another
 648   pulse is detected; this must be called with the device spinlock held */
 649 static void it87_idle_rx(struct ite_dev *dev)
 650 {
 651         ite_dbg("%s called", __func__);
 652
 653         /* disable streaming by clearing RXACT writing it as 1 */
 654         outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT,
 655                 dev->cir_addr + IT87_RCR);
 656
 657         /* clear the FIFO */
 658         outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR,
 659                 dev->cir_addr + IT87_TCR1);
 660 }
 661
 662 /* disable the receiver; this must be called with the device spinlock held */
 663 static void it87_disable_rx(struct ite_dev *dev)
 664 {
 665         ite_dbg("%s called", __func__);
 666
 667         /* disable the receiver interrupts */
 668         outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE),
 669                 dev->cir_addr + IT87_IER);
 670
 671         /* disable the receiver */
 672         outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN,
 673                 dev->cir_addr + IT87_RCR);
 674
 675         /* clear the FIFO and RXACT (actually RXACT should have been cleared
 676         * in the previous outb() call) */
 677         it87_idle_rx(dev);
 678 }
 679
 680 /* enable the receiver; this must be called with the device spinlock held */
 681 static void it87_enable_rx(struct ite_dev *dev)
 682 {
 683         ite_dbg("%s called", __func__);
 684
 685         /* enable the receiver by setting RXEN */
 686         outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN,
 687                 dev->cir_addr + IT87_RCR);
 688
 689         /* just prepare it to idle for the next reception */
 690         it87_idle_rx(dev);
 691
 692         /* enable the receiver interrupts and master enable flag */
 693         outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC,
 694                 dev->cir_addr + IT87_IER);
 695 }
 696
 697 /* disable the transmitter interrupt; this must be called with the device
 698  * spinlock held */
 699 static void it87_disable_tx_interrupt(struct ite_dev *dev)
 700 {
 701         ite_dbg("%s called", __func__);
 702
 703         /* disable the transmitter interrupts */
 704         outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE,
 705                 dev->cir_addr + IT87_IER);
 706 }
 707
 708 /* enable the transmitter interrupt; this must be called with the device
 709  * spinlock held */
 710 static void it87_enable_tx_interrupt(struct ite_dev *dev)
 711 {
 712         ite_dbg("%s called", __func__);
 713
 714         /* enable the transmitter interrupts and master enable flag */
 715         outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC,
 716                 dev->cir_addr + IT87_IER);
 717 }
 718
 719 /* disable the device; this must be called with the device spinlock held */
 720 static void it87_disable(struct ite_dev *dev)
 721 {
 722         ite_dbg("%s called", __func__);
 723
 724         /* clear out all interrupt enable flags */
 725         outb(inb(dev->cir_addr + IT87_IER) &
 726                 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE),
 727                 dev->cir_addr + IT87_IER);
 728
 729         /* disable the receiver */
 730         it87_disable_rx(dev);
 731
 732         /* erase the FIFO */
 733         outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1),
 734                 dev->cir_addr + IT87_TCR1);
 735 }
 736
 737 /* initialize the hardware */
 738 static void it87_init_hardware(struct ite_dev *dev)
 739 {
 740         ite_dbg("%s called", __func__);
 741
 742         /* enable just the baud rate divisor register,
 743         disabling all the interrupts at the same time */
 744         outb((inb(dev->cir_addr + IT87_IER) &
 745                 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR,
 746                 dev->cir_addr + IT87_IER);
 747
 748         /* write out the baud rate divisor */
 749         outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR);
 750         outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR);
 751
 752         /* disable the baud rate divisor register again */
 753         outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR,
 754                 dev->cir_addr + IT87_IER);
 755
 756         /* program the RCR register defaults */
 757         outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR);
 758
 759         /* program the TCR1 register */
 760         outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE
 761                 | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR,
 762                 dev->cir_addr + IT87_TCR1);
 763
 764         /* program the carrier parameters */
 765         ite_set_carrier_params(dev);
 766 }
 767
 768 /* IT8512F on ITE8708 HW-specific functions */
 769
 770 /* retrieve a bitmask of the current causes for a pending interrupt; this may
 771  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
 772  * */
 773 static int it8708_get_irq_causes(struct ite_dev *dev)
 774 {
 775         u8 iflags;
 776         int ret = 0;
 777
 778         ite_dbg("%s called", __func__);
 779
 780         /* read the interrupt flags */
 781         iflags = inb(dev->cir_addr + IT8708_C0IIR);
 782
 783         if (iflags & IT85_TLDLI)
 784                 ret |= ITE_IRQ_TX_FIFO;
 785         if (iflags & IT85_RDAI)
 786                 ret |= ITE_IRQ_RX_FIFO;
 787         if (iflags & IT85_RFOI)
 788                 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
 789
 790         return ret;
 791 }
 792
 793 /* set the carrier parameters; to be called with the spinlock held */
 794 static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq,
 795                                       bool use_demodulator,
 796                                       u8 carrier_freq_bits, u8 allowance_bits,
 797                                       u8 pulse_width_bits)
 798 {
 799         u8 val;
 800
 801         ite_dbg("%s called", __func__);
 802
 803         /* program the C0CFR register, with HRAE=1 */
 804         outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
 805                 dev->cir_addr + IT8708_BANKSEL);
 806
 807         val = (inb(dev->cir_addr + IT8708_C0CFR)
 808                 & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits;
 809
 810         if (high_freq)
 811                 val |= IT85_HCFS;
 812
 813         outb(val, dev->cir_addr + IT8708_C0CFR);
 814
 815         outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
 816                    dev->cir_addr + IT8708_BANKSEL);
 817
 818         /* program the C0RCR register */
 819         val = inb(dev->cir_addr + IT8708_C0RCR)
 820                 & ~(IT85_RXEND | IT85_RXDCR);
 821
 822         if (use_demodulator)
 823                 val |= IT85_RXEND;
 824
 825         val |= allowance_bits;
 826
 827         outb(val, dev->cir_addr + IT8708_C0RCR);
 828
 829         /* program the C0TCR register */
 830         val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW;
 831         val |= pulse_width_bits;
 832         outb(val, dev->cir_addr + IT8708_C0TCR);
 833 }
 834
 835 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
 836  * held */
 837 static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
 838 {
 839         int fifo, read = 0;
 840
 841         ite_dbg("%s called", __func__);
 842
 843         /* read how many bytes are still in the FIFO */
 844         fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC;
 845
 846         while (fifo > 0 && buf_size > 0) {
 847                 *(buf++) = inb(dev->cir_addr + IT8708_C0DR);
 848                 fifo--;
 849                 read++;
 850                 buf_size--;
 851         }
 852
 853         return read;
 854 }
 855
 856 /* return how many bytes are still in the FIFO; this will be called
 857  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
 858  * empty; let's expect this won't be a problem */
 859 static int it8708_get_tx_used_slots(struct ite_dev *dev)
 860 {
 861         ite_dbg("%s called", __func__);
 862
 863         return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC;
 864 }
 865
 866 /* put a byte to the TX fifo; this should be called with the spinlock held */
 867 static void it8708_put_tx_byte(struct ite_dev *dev, u8 value)
 868 {
 869         outb(value, dev->cir_addr + IT8708_C0DR);
 870 }
 871
 872 /* idle the receiver so that we won't receive samples until another
 873   pulse is detected; this must be called with the device spinlock held */
 874 static void it8708_idle_rx(struct ite_dev *dev)
 875 {
 876         ite_dbg("%s called", __func__);
 877
 878         /* disable streaming by clearing RXACT writing it as 1 */
 879         outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT,
 880                 dev->cir_addr + IT8708_C0RCR);
 881
 882         /* clear the FIFO */
 883         outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR,
 884                 dev->cir_addr + IT8708_C0MSTCR);
 885 }
 886
 887 /* disable the receiver; this must be called with the device spinlock held */
 888 static void it8708_disable_rx(struct ite_dev *dev)
 889 {
 890         ite_dbg("%s called", __func__);
 891
 892         /* disable the receiver interrupts */
 893         outb(inb(dev->cir_addr + IT8708_C0IER) &
 894                 ~(IT85_RDAIE | IT85_RFOIE),
 895                 dev->cir_addr + IT8708_C0IER);
 896
 897         /* disable the receiver */
 898         outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN,
 899                 dev->cir_addr + IT8708_C0RCR);
 900
 901         /* clear the FIFO and RXACT (actually RXACT should have been cleared
 902          * in the previous outb() call) */
 903         it8708_idle_rx(dev);
 904 }
 905
 906 /* enable the receiver; this must be called with the device spinlock held */
 907 static void it8708_enable_rx(struct ite_dev *dev)
 908 {
 909         ite_dbg("%s called", __func__);
 910
 911         /* enable the receiver by setting RXEN */
 912         outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN,
 913                 dev->cir_addr + IT8708_C0RCR);
 914
 915         /* just prepare it to idle for the next reception */
 916         it8708_idle_rx(dev);
 917
 918         /* enable the receiver interrupts and master enable flag */
 919         outb(inb(dev->cir_addr + IT8708_C0IER)
 920                 |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
 921                 dev->cir_addr + IT8708_C0IER);
 922 }
 923
 924 /* disable the transmitter interrupt; this must be called with the device
 925  * spinlock held */
 926 static void it8708_disable_tx_interrupt(struct ite_dev *dev)
 927 {
 928         ite_dbg("%s called", __func__);
 929
 930         /* disable the transmitter interrupts */
 931         outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE,
 932                 dev->cir_addr + IT8708_C0IER);
 933 }
 934
 935 /* enable the transmitter interrupt; this must be called with the device
 936  * spinlock held */
 937 static void it8708_enable_tx_interrupt(struct ite_dev *dev)
 938 {
 939         ite_dbg("%s called", __func__);
 940
 941         /* enable the transmitter interrupts and master enable flag */
 942         outb(inb(dev->cir_addr + IT8708_C0IER)
 943                 |IT85_TLDLIE | IT85_IEC,
 944                 dev->cir_addr + IT8708_C0IER);
 945 }
 946
 947 /* disable the device; this must be called with the device spinlock held */
 948 static void it8708_disable(struct ite_dev *dev)
 949 {
 950         ite_dbg("%s called", __func__);
 951
 952         /* clear out all interrupt enable flags */
 953         outb(inb(dev->cir_addr + IT8708_C0IER) &
 954                 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
 955                 dev->cir_addr + IT8708_C0IER);
 956
 957         /* disable the receiver */
 958         it8708_disable_rx(dev);
 959
 960         /* erase the FIFO */
 961         outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR),
 962                 dev->cir_addr + IT8708_C0MSTCR);
 963 }
 964
 965 /* initialize the hardware */
 966 static void it8708_init_hardware(struct ite_dev *dev)
 967 {
 968         ite_dbg("%s called", __func__);
 969
 970         /* disable all the interrupts */
 971         outb(inb(dev->cir_addr + IT8708_C0IER) &
 972                 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
 973                 dev->cir_addr + IT8708_C0IER);
 974
 975         /* program the baud rate divisor */
 976         outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
 977                 dev->cir_addr + IT8708_BANKSEL);
 978
 979         outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR);
 980         outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
 981                    dev->cir_addr + IT8708_C0BDHR);
 982
 983         outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
 984                    dev->cir_addr + IT8708_BANKSEL);
 985
 986         /* program the C0MSTCR register defaults */
 987         outb((inb(dev->cir_addr + IT8708_C0MSTCR) &
 988                         ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL |
 989                           IT85_FIFOCLR | IT85_RESET)) |
 990                        IT85_FIFOTL_DEFAULT,
 991                        dev->cir_addr + IT8708_C0MSTCR);
 992
 993         /* program the C0RCR register defaults */
 994         outb((inb(dev->cir_addr + IT8708_C0RCR) &
 995                         ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND |
 996                           IT85_RXACT | IT85_RXDCR)) |
 997                        ITE_RXDCR_DEFAULT,
 998                        dev->cir_addr + IT8708_C0RCR);
 999
1000         /* program the C0TCR register defaults */
1001         outb((inb(dev->cir_addr + IT8708_C0TCR) &
1002                         ~(IT85_TXMPM | IT85_TXMPW))
1003                        |IT85_TXRLE | IT85_TXENDF |
1004                        IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT,
1005                        dev->cir_addr + IT8708_C0TCR);
1006
1007         /* program the carrier parameters */
1008         ite_set_carrier_params(dev);
1009 }
1010
1011 /* IT8512F on ITE8709 HW-specific functions */
1012
1013 /* read a byte from the SRAM module */
1014 static inline u8 it8709_rm(struct ite_dev *dev, int index)
1015 {
1016         outb(index, dev->cir_addr + IT8709_RAM_IDX);
1017         return inb(dev->cir_addr + IT8709_RAM_VAL);
1018 }
1019
1020 /* write a byte to the SRAM module */
1021 static inline void it8709_wm(struct ite_dev *dev, u8 val, int index)
1022 {
1023         outb(index, dev->cir_addr + IT8709_RAM_IDX);
1024         outb(val, dev->cir_addr + IT8709_RAM_VAL);
1025 }
1026
1027 static void it8709_wait(struct ite_dev *dev)
1028 {
1029         int i = 0;
1030         /*
1031          * loop until device tells it's ready to continue
1032          * iterations count is usually ~750 but can sometimes achieve 13000
1033          */
1034         for (i = 0; i < 15000; i++) {
1035                 udelay(2);
1036                 if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE)
1037                         break;
1038         }
1039 }
1040
1041 /* read the value of a CIR register */
1042 static u8 it8709_rr(struct ite_dev *dev, int index)
1043 {
1044         /* just wait in case the previous access was a write */
1045         it8709_wait(dev);
1046         it8709_wm(dev, index, IT8709_REG_IDX);
1047         it8709_wm(dev, IT8709_READ, IT8709_MODE);
1048
1049         /* wait for the read data to be available */
1050         it8709_wait(dev);
1051
1052         /* return the read value */
1053         return it8709_rm(dev, IT8709_REG_VAL);
1054 }
1055
1056 /* write the value of a CIR register */
1057 static void it8709_wr(struct ite_dev *dev, u8 val, int index)
1058 {
1059         /* we wait before writing, and not afterwards, since this allows us to
1060          * pipeline the host CPU with the microcontroller */
1061         it8709_wait(dev);
1062         it8709_wm(dev, val, IT8709_REG_VAL);
1063         it8709_wm(dev, index, IT8709_REG_IDX);
1064         it8709_wm(dev, IT8709_WRITE, IT8709_MODE);
1065 }
1066
1067 /* retrieve a bitmask of the current causes for a pending interrupt; this may
1068  * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
1069  * */
1070 static int it8709_get_irq_causes(struct ite_dev *dev)
1071 {
1072         u8 iflags;
1073         int ret = 0;
1074
1075         ite_dbg("%s called", __func__);
1076
1077         /* read the interrupt flags */
1078         iflags = it8709_rm(dev, IT8709_IIR);
1079
1080         if (iflags & IT85_TLDLI)
1081                 ret |= ITE_IRQ_TX_FIFO;
1082         if (iflags & IT85_RDAI)
1083                 ret |= ITE_IRQ_RX_FIFO;
1084         if (iflags & IT85_RFOI)
1085                 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
1086
1087         return ret;
1088 }
1089
1090 /* set the carrier parameters; to be called with the spinlock held */
1091 static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq,
1092                                       bool use_demodulator,
1093                                       u8 carrier_freq_bits, u8 allowance_bits,
1094                                       u8 pulse_width_bits)
1095 {
1096         u8 val;
1097
1098         ite_dbg("%s called", __func__);
1099
1100         val = (it8709_rr(dev, IT85_C0CFR)
1101                      &~(IT85_HCFS | IT85_CFQ)) |
1102             carrier_freq_bits;
1103
1104         if (high_freq)
1105                 val |= IT85_HCFS;
1106
1107         it8709_wr(dev, val, IT85_C0CFR);
1108
1109         /* program the C0RCR register */
1110         val = it8709_rr(dev, IT85_C0RCR)
1111                 & ~(IT85_RXEND | IT85_RXDCR);
1112
1113         if (use_demodulator)
1114                 val |= IT85_RXEND;
1115
1116         val |= allowance_bits;
1117
1118         it8709_wr(dev, val, IT85_C0RCR);
1119
1120         /* program the C0TCR register */
1121         val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW;
1122         val |= pulse_width_bits;
1123         it8709_wr(dev, val, IT85_C0TCR);
1124 }
1125
1126 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
1127  * held */
1128 static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
1129 {
1130         int fifo, read = 0;
1131
1132         ite_dbg("%s called", __func__);
1133
1134         /* read how many bytes are still in the FIFO */
1135         fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC;
1136
1137         while (fifo > 0 && buf_size > 0) {
1138                 *(buf++) = it8709_rm(dev, IT8709_FIFO + read);
1139                 fifo--;
1140                 read++;
1141                 buf_size--;
1142         }
1143
1144         /* 'clear' the FIFO by setting the writing index to 0; this is
1145          * completely bound to be racy, but we can't help it, since it's a
1146          * limitation of the protocol */
1147         it8709_wm(dev, 0, IT8709_RFSR);
1148
1149         return read;
1150 }
1151
1152 /* return how many bytes are still in the FIFO; this will be called
1153  * with the device spinlock NOT HELD while waiting for the TX FIFO to get
1154  * empty; let's expect this won't be a problem */
1155 static int it8709_get_tx_used_slots(struct ite_dev *dev)
1156 {
1157         ite_dbg("%s called", __func__);
1158
1159         return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC;
1160 }
1161
1162 /* put a byte to the TX fifo; this should be called with the spinlock held */
1163 static void it8709_put_tx_byte(struct ite_dev *dev, u8 value)
1164 {
1165         it8709_wr(dev, value, IT85_C0DR);
1166 }
1167
1168 /* idle the receiver so that we won't receive samples until another
1169   pulse is detected; this must be called with the device spinlock held */
1170 static void it8709_idle_rx(struct ite_dev *dev)
1171 {
1172         ite_dbg("%s called", __func__);
1173
1174         /* disable streaming by clearing RXACT writing it as 1 */
1175         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT,
1176                             IT85_C0RCR);
1177
1178         /* clear the FIFO */
1179         it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR,
1180                             IT85_C0MSTCR);
1181 }
1182
1183 /* disable the receiver; this must be called with the device spinlock held */
1184 static void it8709_disable_rx(struct ite_dev *dev)
1185 {
1186         ite_dbg("%s called", __func__);
1187
1188         /* disable the receiver interrupts */
1189         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1190                             ~(IT85_RDAIE | IT85_RFOIE),
1191                             IT85_C0IER);
1192
1193         /* disable the receiver */
1194         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN,
1195                             IT85_C0RCR);
1196
1197         /* clear the FIFO and RXACT (actually RXACT should have been cleared
1198          * in the previous it8709_wr(dev, ) call) */
1199         it8709_idle_rx(dev);
1200 }
1201
1202 /* enable the receiver; this must be called with the device spinlock held */
1203 static void it8709_enable_rx(struct ite_dev *dev)
1204 {
1205         ite_dbg("%s called", __func__);
1206
1207         /* enable the receiver by setting RXEN */
1208         it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN,
1209                             IT85_C0RCR);
1210
1211         /* just prepare it to idle for the next reception */
1212         it8709_idle_rx(dev);
1213
1214         /* enable the receiver interrupts and master enable flag */
1215         it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1216                             |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
1217                             IT85_C0IER);
1218 }
1219
1220 /* disable the transmitter interrupt; this must be called with the device
1221  * spinlock held */
1222 static void it8709_disable_tx_interrupt(struct ite_dev *dev)
1223 {
1224         ite_dbg("%s called", __func__);
1225
1226         /* disable the transmitter interrupts */
1227         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE,
1228                             IT85_C0IER);
1229 }
1230
1231 /* enable the transmitter interrupt; this must be called with the device
1232  * spinlock held */
1233 static void it8709_enable_tx_interrupt(struct ite_dev *dev)
1234 {
1235         ite_dbg("%s called", __func__);
1236
1237         /* enable the transmitter interrupts and master enable flag */
1238         it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1239                             |IT85_TLDLIE | IT85_IEC,
1240                             IT85_C0IER);
1241 }
1242
1243 /* disable the device; this must be called with the device spinlock held */
1244 static void it8709_disable(struct ite_dev *dev)
1245 {
1246         ite_dbg("%s called", __func__);
1247
1248         /* clear out all interrupt enable flags */
1249         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1250                         ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1251                   IT85_C0IER);
1252
1253         /* disable the receiver */
1254         it8709_disable_rx(dev);
1255
1256         /* erase the FIFO */
1257         it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR),
1258                             IT85_C0MSTCR);
1259 }
1260
1261 /* initialize the hardware */
1262 static void it8709_init_hardware(struct ite_dev *dev)
1263 {
1264         ite_dbg("%s called", __func__);
1265
1266         /* disable all the interrupts */
1267         it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1268                         ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1269                   IT85_C0IER);
1270
1271         /* program the baud rate divisor */
1272         it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR);
1273         it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
1274                         IT85_C0BDHR);
1275
1276         /* program the C0MSTCR register defaults */
1277         it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) &
1278                         ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL
1279                           | IT85_FIFOCLR | IT85_RESET)) | IT85_FIFOTL_DEFAULT,
1280                   IT85_C0MSTCR);
1281
1282         /* program the C0RCR register defaults */
1283         it8709_wr(dev, (it8709_rr(dev, IT85_C0RCR) &
1284                         ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | IT85_RXACT
1285                           | IT85_RXDCR)) | ITE_RXDCR_DEFAULT,
1286                   IT85_C0RCR);
1287
1288         /* program the C0TCR register defaults */
1289         it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR) & ~(IT85_TXMPM | IT85_TXMPW))
1290                         | IT85_TXRLE | IT85_TXENDF | IT85_TXMPM_DEFAULT
1291                         | IT85_TXMPW_DEFAULT,
1292                   IT85_C0TCR);
1293
1294         /* program the carrier parameters */
1295         ite_set_carrier_params(dev);
1296 }
1297
1298
1299 /* generic hardware setup/teardown code */
1300
1301 /* activate the device for use */
1302 static int ite_open(struct rc_dev *rcdev)
1303 {
1304         struct ite_dev *dev = rcdev->priv;
1305         unsigned long flags;
1306
1307         ite_dbg("%s called", __func__);
1308
1309         spin_lock_irqsave(&dev->lock, flags);
1310         dev->in_use = true;
1311
1312         /* enable the receiver */
1313         dev->params.enable_rx(dev);
1314
1315         spin_unlock_irqrestore(&dev->lock, flags);
1316
1317         return 0;
1318 }
1319
1320 /* deactivate the device for use */
1321 static void ite_close(struct rc_dev *rcdev)
1322 {
1323         struct ite_dev *dev = rcdev->priv;
1324         unsigned long flags;
1325
1326         ite_dbg("%s called", __func__);
1327
1328         spin_lock_irqsave(&dev->lock, flags);
1329         dev->in_use = false;
1330
1331         /* wait for any transmission to end */
1332         spin_unlock_irqrestore(&dev->lock, flags);
1333         wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1334         spin_lock_irqsave(&dev->lock, flags);
1335
1336         dev->params.disable(dev);
1337
1338         spin_unlock_irqrestore(&dev->lock, flags);
1339 }
1340
1341 /* supported models and their parameters */
1342 static const struct ite_dev_params ite_dev_descs[] = {
1343         {       /* 0: ITE8704 */
1344                .model = "ITE8704 CIR transceiver",
1345                .io_region_size = IT87_IOREG_LENGTH,
1346                .io_rsrc_no = 0,
1347                .hw_tx_capable = true,
1348                .sample_period = (u32) (1000000000ULL / 115200),
1349                .tx_carrier_freq = 38000,
1350                .tx_duty_cycle = 33,
1351                .rx_low_carrier_freq = 0,
1352                .rx_high_carrier_freq = 0,
1353
1354                 /* operations */
1355                .get_irq_causes = it87_get_irq_causes,
1356                .enable_rx = it87_enable_rx,
1357                .idle_rx = it87_idle_rx,
1358                .disable_rx = it87_idle_rx,
1359                .get_rx_bytes = it87_get_rx_bytes,
1360                .enable_tx_interrupt = it87_enable_tx_interrupt,
1361                .disable_tx_interrupt = it87_disable_tx_interrupt,
1362                .get_tx_used_slots = it87_get_tx_used_slots,
1363                .put_tx_byte = it87_put_tx_byte,
1364                .disable = it87_disable,
1365                .init_hardware = it87_init_hardware,
1366                .set_carrier_params = it87_set_carrier_params,
1367                },
1368         {       /* 1: ITE8713 */
1369                .model = "ITE8713 CIR transceiver",
1370                .io_region_size = IT87_IOREG_LENGTH,
1371                .io_rsrc_no = 0,
1372                .hw_tx_capable = true,
1373                .sample_period = (u32) (1000000000ULL / 115200),
1374                .tx_carrier_freq = 38000,
1375                .tx_duty_cycle = 33,
1376                .rx_low_carrier_freq = 0,
1377                .rx_high_carrier_freq = 0,
1378
1379                 /* operations */
1380                .get_irq_causes = it87_get_irq_causes,
1381                .enable_rx = it87_enable_rx,
1382                .idle_rx = it87_idle_rx,
1383                .disable_rx = it87_idle_rx,
1384                .get_rx_bytes = it87_get_rx_bytes,
1385                .enable_tx_interrupt = it87_enable_tx_interrupt,
1386                .disable_tx_interrupt = it87_disable_tx_interrupt,
1387                .get_tx_used_slots = it87_get_tx_used_slots,
1388                .put_tx_byte = it87_put_tx_byte,
1389                .disable = it87_disable,
1390                .init_hardware = it87_init_hardware,
1391                .set_carrier_params = it87_set_carrier_params,
1392                },
1393         {       /* 2: ITE8708 */
1394                .model = "ITE8708 CIR transceiver",
1395                .io_region_size = IT8708_IOREG_LENGTH,
1396                .io_rsrc_no = 0,
1397                .hw_tx_capable = true,
1398                .sample_period = (u32) (1000000000ULL / 115200),
1399                .tx_carrier_freq = 38000,
1400                .tx_duty_cycle = 33,
1401                .rx_low_carrier_freq = 0,
1402                .rx_high_carrier_freq = 0,
1403
1404                 /* operations */
1405                .get_irq_causes = it8708_get_irq_causes,
1406                .enable_rx = it8708_enable_rx,
1407                .idle_rx = it8708_idle_rx,
1408                .disable_rx = it8708_idle_rx,
1409                .get_rx_bytes = it8708_get_rx_bytes,
1410                .enable_tx_interrupt = it8708_enable_tx_interrupt,
1411                .disable_tx_interrupt =
1412                it8708_disable_tx_interrupt,
1413                .get_tx_used_slots = it8708_get_tx_used_slots,
1414                .put_tx_byte = it8708_put_tx_byte,
1415                .disable = it8708_disable,
1416                .init_hardware = it8708_init_hardware,
1417                .set_carrier_params = it8708_set_carrier_params,
1418                },
1419         {       /* 3: ITE8709 */
1420                .model = "ITE8709 CIR transceiver",
1421                .io_region_size = IT8709_IOREG_LENGTH,
1422                .io_rsrc_no = 2,
1423                .hw_tx_capable = true,
1424                .sample_period = (u32) (1000000000ULL / 115200),
1425                .tx_carrier_freq = 38000,
1426                .tx_duty_cycle = 33,
1427                .rx_low_carrier_freq = 0,
1428                .rx_high_carrier_freq = 0,
1429
1430                 /* operations */
1431                .get_irq_causes = it8709_get_irq_causes,
1432                .enable_rx = it8709_enable_rx,
1433                .idle_rx = it8709_idle_rx,
1434                .disable_rx = it8709_idle_rx,
1435                .get_rx_bytes = it8709_get_rx_bytes,
1436                .enable_tx_interrupt = it8709_enable_tx_interrupt,
1437                .disable_tx_interrupt =
1438                it8709_disable_tx_interrupt,
1439                .get_tx_used_slots = it8709_get_tx_used_slots,
1440                .put_tx_byte = it8709_put_tx_byte,
1441                .disable = it8709_disable,
1442                .init_hardware = it8709_init_hardware,
1443                .set_carrier_params = it8709_set_carrier_params,
1444                },
1445 };
1446
1447 static const struct pnp_device_id ite_ids[] = {
1448         {"ITE8704", 0},         /* Default model */
1449         {"ITE8713", 1},         /* CIR found in EEEBox 1501U */
1450         {"ITE8708", 2},         /* Bridged IT8512 */
1451         {"ITE8709", 3},         /* SRAM-Bridged IT8512 */
1452         {"", 0},
1453 };
1454
1455 /* allocate memory, probe hardware, and initialize everything */
1456 static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
1457                      *dev_id)
1458 {
1459         const struct ite_dev_params *dev_desc = NULL;
1460         struct ite_dev *itdev = NULL;
1461         struct rc_dev *rdev = NULL;
1462         int ret = -ENOMEM;
1463         int model_no;
1464         int io_rsrc_no;
1465
1466         ite_dbg("%s called", __func__);
1467
1468         itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL);
1469         if (!itdev)
1470                 return ret;
1471
1472         /* input device for IR remote (and tx) */
1473         rdev = rc_allocate_device();
1474         if (!rdev)
1475                 goto failure;
1476
1477         ret = -ENODEV;
1478
1479         /* get the model number */
1480         model_no = (int)dev_id->driver_data;
1481         ite_pr(KERN_NOTICE, "Auto-detected model: %s\n",
1482                 ite_dev_descs[model_no].model);
1483
1484         if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
1485                 model_no = model_number;
1486                 ite_pr(KERN_NOTICE, "The model has been fixed by a module "
1487                         "parameter.");
1488         }
1489
1490         ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model);
1491
1492         /* get the description for the device */
1493         dev_desc = &ite_dev_descs[model_no];
1494         io_rsrc_no = dev_desc->io_rsrc_no;
1495
1496         /* validate pnp resources */
1497         if (!pnp_port_valid(pdev, io_rsrc_no) ||
1498             pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) {
1499                 dev_err(&pdev->dev, "IR PNP Port not valid!\n");
1500                 goto failure;
1501         }
1502
1503         if (!pnp_irq_valid(pdev, 0)) {
1504                 dev_err(&pdev->dev, "PNP IRQ not valid!\n");
1505                 goto failure;
1506         }
1507
1508         /* store resource values */
1509         itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
1510         itdev->cir_irq = pnp_irq(pdev, 0);
1511
1512         /* initialize spinlocks */
1513         spin_lock_init(&itdev->lock);
1514
1515         /* initialize raw event */
1516         init_ir_raw_event(&itdev->rawir);
1517
1518         ret = -EBUSY;
1519         /* now claim resources */
1520         if (!request_region(itdev->cir_addr,
1521                                 dev_desc->io_region_size, ITE_DRIVER_NAME))
1522                 goto failure;
1523
1524         if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED,
1525                         ITE_DRIVER_NAME, (void *)itdev))
1526                 goto failure;
1527
1528         /* set driver data into the pnp device */
1529         pnp_set_drvdata(pdev, itdev);
1530         itdev->pdev = pdev;
1531
1532         /* initialize waitqueues for transmission */
1533         init_waitqueue_head(&itdev->tx_queue);
1534         init_waitqueue_head(&itdev->tx_ended);
1535
1536         /* copy model-specific parameters */
1537         itdev->params = *dev_desc;
1538
1539         /* apply any overrides */
1540         if (sample_period > 0)
1541                 itdev->params.sample_period = sample_period;
1542
1543         if (tx_carrier_freq > 0)
1544                 itdev->params.tx_carrier_freq = tx_carrier_freq;
1545
1546         if (tx_duty_cycle > 0 && tx_duty_cycle <= 100)
1547                 itdev->params.tx_duty_cycle = tx_duty_cycle;
1548
1549         if (rx_low_carrier_freq > 0)
1550                 itdev->params.rx_low_carrier_freq = rx_low_carrier_freq;
1551
1552         if (rx_high_carrier_freq > 0)
1553                 itdev->params.rx_high_carrier_freq = rx_high_carrier_freq;
1554
1555         /* print out parameters */
1556         ite_pr(KERN_NOTICE, "TX-capable: %d\n", (int)
1557                          itdev->params.hw_tx_capable);
1558         ite_pr(KERN_NOTICE, "Sample period (ns): %ld\n", (long)
1559                      itdev->params.sample_period);
1560         ite_pr(KERN_NOTICE, "TX carrier frequency (Hz): %d\n", (int)
1561                      itdev->params.tx_carrier_freq);
1562         ite_pr(KERN_NOTICE, "TX duty cycle (%%): %d\n", (int)
1563                      itdev->params.tx_duty_cycle);
1564         ite_pr(KERN_NOTICE, "RX low carrier frequency (Hz): %d\n", (int)
1565                      itdev->params.rx_low_carrier_freq);
1566         ite_pr(KERN_NOTICE, "RX high carrier frequency (Hz): %d\n", (int)
1567                      itdev->params.rx_high_carrier_freq);
1568
1569         /* set up hardware initial state */
1570         itdev->params.init_hardware(itdev);
1571
1572         /* set up ir-core props */
1573         rdev->priv = itdev;
1574         rdev->driver_type = RC_DRIVER_IR_RAW;
1575         rdev->allowed_protos = RC_TYPE_ALL;
1576         rdev->open = ite_open;
1577         rdev->close = ite_close;
1578         rdev->s_idle = ite_s_idle;
1579         rdev->s_rx_carrier_range = ite_set_rx_carrier_range;
1580         rdev->min_timeout = ITE_MIN_IDLE_TIMEOUT;
1581         rdev->max_timeout = ITE_MAX_IDLE_TIMEOUT;
1582         rdev->timeout = ITE_IDLE_TIMEOUT;
1583         rdev->rx_resolution = ITE_BAUDRATE_DIVISOR *
1584                                 itdev->params.sample_period;
1585         rdev->tx_resolution = ITE_BAUDRATE_DIVISOR *
1586                                 itdev->params.sample_period;
1587
1588         /* set up transmitter related values if needed */
1589         if (itdev->params.hw_tx_capable) {
1590                 rdev->tx_ir = ite_tx_ir;
1591                 rdev->s_tx_carrier = ite_set_tx_carrier;
1592                 rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
1593         }
1594
1595         rdev->input_name = dev_desc->model;
1596         rdev->input_id.bustype = BUS_HOST;
1597         rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
1598         rdev->input_id.product = 0;
1599         rdev->input_id.version = 0;
1600         rdev->driver_name = ITE_DRIVER_NAME;
1601         rdev->map_name = RC_MAP_RC6_MCE;
1602
1603         ret = rc_register_device(rdev);
1604         if (ret)
1605                 goto failure;
1606
1607         itdev->rdev = rdev;
1608         ite_pr(KERN_NOTICE, "driver has been successfully loaded\n");
1609
1610         return 0;
1611
1612 failure:
1613         if (itdev->cir_irq)
1614                 free_irq(itdev->cir_irq, itdev);
1615
1616         if (itdev->cir_addr)
1617                 release_region(itdev->cir_addr, itdev->params.io_region_size);
1618
1619         rc_free_device(rdev);
1620         kfree(itdev);
1621
1622         return ret;
1623 }
1624
1625 static void __devexit ite_remove(struct pnp_dev *pdev)
1626 {
1627         struct ite_dev *dev = pnp_get_drvdata(pdev);
1628         unsigned long flags;
1629
1630         ite_dbg("%s called", __func__);
1631
1632         spin_lock_irqsave(&dev->lock, flags);
1633
1634         /* disable hardware */
1635         dev->params.disable(dev);
1636
1637         spin_unlock_irqrestore(&dev->lock, flags);
1638
1639         /* free resources */
1640         free_irq(dev->cir_irq, dev);
1641         release_region(dev->cir_addr, dev->params.io_region_size);
1642
1643         rc_unregister_device(dev->rdev);
1644
1645         kfree(dev);
1646 }
1647
1648 static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)
1649 {
1650         struct ite_dev *dev = pnp_get_drvdata(pdev);
1651         unsigned long flags;
1652
1653         ite_dbg("%s called", __func__);
1654
1655         /* wait for any transmission to end */
1656         wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1657
1658         spin_lock_irqsave(&dev->lock, flags);
1659
1660         /* disable all interrupts */
1661         dev->params.disable(dev);
1662
1663         spin_unlock_irqrestore(&dev->lock, flags);
1664
1665         return 0;
1666 }
1667
1668 static int ite_resume(struct pnp_dev *pdev)
1669 {
1670         int ret = 0;
1671         struct ite_dev *dev = pnp_get_drvdata(pdev);
1672         unsigned long flags;
1673
1674         ite_dbg("%s called", __func__);
1675
1676         spin_lock_irqsave(&dev->lock, flags);
1677
1678         /* reinitialize hardware config registers */
1679         dev->params.init_hardware(dev);
1680         /* enable the receiver */
1681         dev->params.enable_rx(dev);
1682
1683         spin_unlock_irqrestore(&dev->lock, flags);
1684
1685         return ret;
1686 }
1687
1688 static void ite_shutdown(struct pnp_dev *pdev)
1689 {
1690         struct ite_dev *dev = pnp_get_drvdata(pdev);
1691         unsigned long flags;
1692
1693         ite_dbg("%s called", __func__);
1694
1695         spin_lock_irqsave(&dev->lock, flags);
1696
1697         /* disable all interrupts */
1698         dev->params.disable(dev);
1699
1700         spin_unlock_irqrestore(&dev->lock, flags);
1701 }
1702
1703 static struct pnp_driver ite_driver = {
1704         .name           = ITE_DRIVER_NAME,
1705         .id_table       = ite_ids,
1706         .probe          = ite_probe,
1707         .remove         = __devexit_p(ite_remove),
1708         .suspend        = ite_suspend,
1709         .resume         = ite_resume,
1710         .shutdown       = ite_shutdown,
1711 };
1712
1713 int ite_init(void)
1714 {
1715         return pnp_register_driver(&ite_driver);
1716 }
1717
1718 void ite_exit(void)
1719 {
1720         pnp_unregister_driver(&ite_driver);
1721 }
1722
1723 MODULE_DEVICE_TABLE(pnp, ite_ids);
1724 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
1725
1726 MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>");
1727 MODULE_LICENSE("GPL");
1728
1729 module_init(ite_init);
1730 module_exit(ite_exit);