Use override/default for RTPortableServer

[ACE_TAO.git] / ACE / ace / NT_Service.h

// -*- C++ -*-

//==========================================================================
/**
 *  @file    NT_Service.h
 *
 *  @author Steve Huston <shuston@riverace.com>
 */
//==========================================================================

#ifndef ACE_NT_SERVICE_H
#define ACE_NT_SERVICE_H

#include /**/ "ace/pre.h"

#include /**/ "ace/config-all.h"

#if !defined (ACE_LACKS_PRAGMA_ONCE)
# pragma once
#endif /* ACE_LACKS_PRAGMA_ONCE */

#if defined (ACE_WIN32)

#include "ace/ACE.h"
#include "ace/OS_Log_Msg_Attributes.h"
#include "ace/Service_Object.h"
#include "ace/Task.h"
#include "ace/OS_NS_errno.h" // needed for those using our macros

// ACE_NT_SERVICE_START_TIMEOUT is an estimate of the number of
// milliseconds your service will take to start.  Default is 5
// seconds; you can pass a different value (or set one) when you
// create the ACE_NT_Service object for your service.
#if !defined ACE_NT_SERVICE_START_TIMEOUT
#define ACE_NT_SERVICE_START_TIMEOUT  5000
#endif /* ACE_NT_SERVICE_TIMEOUT */

ACE_BEGIN_VERSIONED_NAMESPACE_DECL

/**
 * @class ACE_NT_Service
 *
 * @brief Provide the base class which defines the interface for controlling
 * an NT service.
 *
 * NT Services can be implemented using the framework defined by
 * the ACE_NT_Service class, and the macros defined in this file.
 * Some quick refresher notes on NT Services:
 *
 *   - The main program defines an array of entries describing the
 *     services offered.  The ACE_NT_SERVICE_ENTRY macro can help with
 *     this.
 *   - For each service, a separate ServiceMain and Handler function
 *     need to be defined.  These are taken care of by the
 *     ACE_NT_SERVICE_DEFINE macro.
 *   - When the main program/thread calls
 *     StartServiceCtrlDispatcher, NT creates a thread for each
 *     service, and runs the ServiceMain function for the service in
 *     that new thread.  When that thread exits, the service is gone.
 *
 *   To use this facility, you could derive a class from
 *   ACE_Service_Object (if you want to start via ACE's service
 *   configurator), or use any other class to run when the image
 *   starts (assuming that NT runs the image).  You must set up an
 *   NT SERVICE_TABLE_ENTRY array to define your service(s).  You
 *   can use the ACE_NT_SERVICE_... macros defined below for this.
 *
 *   A SERVICE_TABLE might look like this:
 *       ACE_NT_SERVICE_REFERENCE(Svc1);  // If service is in another file
 *       SERVICE_TABLE_ENTRY myServices[] = {
 *                    ACE_NT_SERVICE_ENTRY ("MyNeatService", Svc1),
 *                    { 0, 0 } };
 *
 *   In the file where your service(s) are implemented, use the
 *   ACE_NT_SERVICE_DEFINE macro to set up the following:
 *    1. A pointer to the service's implementation object (must be derived
 *       from ACE_NT_Service).
 *    2. The service's Handler function (forwards all requests to the
 *       ACE_NT_Service-derived object's handle_control function).
 *    3. The service's ServiceMain function.  Creates a new instance
 *       of the ACE_NT_Service-derived class SVCCLASS, unless one has
 *       been created already.
 *
 *   If you are using all the default constructor values, you can
 *   let the generated ServiceMain function create the object, else
 *   you need to create it by hand before calling
 *   StartServiceCtrlDispatcher.  Set the pointer so ServiceMain
 *   won't create another one.  Another reason you may want to do
 *   the object creation yourself is if you want to also implement
 *   suspend and resume functions (the ones inherited from
 *   ACE_Service_Object) to do something intelligent to the services
 *   which are running, like call their handle_control functions to
 *   request suspend and resume actions, similar to what NT would do
 *   if a Services control panel applet would do if the user clicks
 *   on Suspend.
 */
class ACE_Export ACE_NT_Service : public ACE_Task<ACE_MT_SYNCH>
{
public:
  /// Constructor primarily for use when running the service.
  ACE_NT_Service (DWORD start_timeout = ACE_NT_SERVICE_START_TIMEOUT,
                  DWORD service_type = SERVICE_WIN32_OWN_PROCESS,
                  DWORD controls_mask = SERVICE_ACCEPT_STOP);

  /// Constructor primarily for use when inserting/removing/controlling
  /// the service.
  ACE_NT_Service (const ACE_TCHAR *name,
                  const ACE_TCHAR *desc = 0,
                  DWORD start_timeout = ACE_NT_SERVICE_START_TIMEOUT,
                  DWORD service_type = SERVICE_WIN32_OWN_PROCESS,
                  DWORD controls_mask = SERVICE_ACCEPT_STOP);

  virtual ~ACE_NT_Service ();

  // = Functions to operate the service

  /**
   * Hook called to open the service.  By default, sets the service
   * status to SERVICE_START_PENDING, calls the @c svc() method,
   * interprets and sets the service status, and returns.
   */
  virtual int open (void *args = 0);

  /**
   * Hook called when terminating the service. Inherited from
   * ACE_Shared_Object. Default implementation sets the service status
   * to SERVICE_STOPPED.
   */
  virtual int fini ();

  /**
   * The actual service implementation.  This function need not be overridden
   * by applications that are just using SCM capabilities, but must be
   * by subclasses when actually running the service.  It is expected that
   * this function will set the status to RUNNING.
   */
  virtual int svc ();

  /**
   * This function is called in response to a request from the Service
   * Dispatcher.  It must interact with the <svc> function to effect the
   * requested control operation.  The default implementation handles
   * all requests as follows:
   *    SERVICE_CONTROL_STOP: set stop pending, set cancel flag
   *    SERVICE_CONTROL_PAUSE: set pause pending, <suspend>, set paused
   *    SERVICE_CONTROL_CONTINUE: set continue pending, <resume>, set running
   *    SERVICE_CONTROL_INTERROGATE: reports current status
   *    SERVICE_CONTROL_SHUTDOWN: same as SERVICE_CONTROL_STOP.
   */
  virtual void handle_control (DWORD control_code);

  /// Set the svc_handle_ member.  This is only a public function because
  /// the macro-generated service function calls it.
  void svc_handle (const SERVICE_STATUS_HANDLE new_svc_handle);


  // = Methods which can be used to do SCP-like functions. The first group
  // are used to register/insert and remove the service's definition in the
  // SCM registry.

  /// Sets the name and description for the service.
  /// If @a desc is 0, it takes the same value as name.
  void name (const ACE_TCHAR *name, const ACE_TCHAR *desc = 0);

  /// Get the service name.
  const ACE_TCHAR *name () const;

  /// Get the service description.
  const ACE_TCHAR *desc () const;

  /// Sets the host machine
  void host (const ACE_TCHAR *host);

  /// Get the host machine.
  const ACE_TCHAR *host () const;

  /**
   * Insert (create) the service in the NT Service Control Manager,
   * with the given creation values.  exe_path defaults to the path name
   * of the program that calls the function.  All other 0-defaulted arguments
   * pass 0 into the service creation, taking NT_specified defaults.
   * Returns -1 on error, 0 on success.
   */
  int insert (DWORD start_type = SERVICE_DEMAND_START,
              DWORD error_control = SERVICE_ERROR_IGNORE,
              const ACE_TCHAR *exe_path = 0,
              const ACE_TCHAR *group_name = 0,
              LPDWORD tag_id = 0,
              const ACE_TCHAR *dependencies = 0,
              const ACE_TCHAR *account_name = 0,
              const ACE_TCHAR *password = 0,
              DWORD desired_access = SERVICE_ALL_ACCESS);

  /**
   * Remove the service from the NT Service Control Manager.  Returns -1 on
   * error, 0 on success.  This just affects the SCM and registry - the
   * can and will keep running fine if it is already running.
   */
  int remove ();

  /// Sets the startup type for the service.  Returns -1 on error, 0 on success.
  int startup (DWORD startup);

  /// Returns the current startup type.
  DWORD startup ();

  // = Methods to control ACE_Log_Msg behavior in the service.

  /**
   * Set the ACE_Log_Msg attributes that the service thread will use to
   * initialize its ACE_Log_Msg instance. This is how the initiating
   * thread's logging ostream, etc. get into the service thread. The
   * logging attributes in effect when this function is called are what
   * the service thread will have at its disposal when it starts; therefore,
   * the main thread should set up logging options for the process, and
   * call this function just before calling the StartServiceCtrlDispatcher
   * function.
   */
  void capture_log_msg_attributes ();

  /**
   * Set the ACE_Log_Msg attributes in the current thread to those saved
   * in the most recent call to @c capture_log_msg_attributes(). This function
   * should be called from the service's service thread. Ideally, it is the
   * first method called to be sure that any logging done is incorporated
   * correctly into the process's established logging setup.
   */
  void inherit_log_msg_attributes ();

  // = Methods which control the service's execution.

  // These methods to start/pause/resume/stop/check the service all
  // have the following common behavior with respect to @a wait_time
  // and return value.  @a wait_time is a pointer to an ACE_Time_Value
  // object.  If not supplied (a zero pointer) the function will wait
  // indefinitely for the action to be finalized (service reach
  // running state, completely shut down, etc.) or get "stuck" before
  // returning.  If the time is supplied, it specifies how long to
  // wait for the service to reach a steady state, and on return, it
  // is updated to the service's last reported wait hint.  So, if you
  // want to control the waiting yourself (for example, you want to
  // react to UI events during the wait) specify a @a wait_time of (0,
  // 0) and use the updated time to know when to check the service's
  // state again.  NOTE!!!! The wait_time things don't work yet.  The
  // calls always check status once, and do not wait for it to change.
  //
  // The return value from start_svc, stop_svc, pause_svc,
  // continue_svc is 0 if the request to NT to effect the change was
  // made successfully.  The service may refuse to change, or not do
  // what you wanted; so if you need to know, supply a <svc_state>
  // pointer to receive the service's reported last state on return
  // and check it to see if it's what you want.  The functions only
  // return -1 when the actual request to the service is refused -
  // this would include privilege restrictions and if the service is
  // not configured to receive the request (this is most likely to
  // happen in the case of pause and continue).

  /**
   * Start the service (must have been inserted before).  wait_time is
   * the time to wait for the service to reach a steady state before
   * returning.  If it is 0, the function waits as long as it takes
   * for the service to reach the 'running' state, or gets stuck in
   * some other state, or exits.  If @a wait_time is supplied, it is
   * updated on return to hold the service's last reported wait hint.
   * svc_state can be used to receive the state which the service
   * settled in.  If the value is 0, the service never ran.  argc/argv
   * are passed to the service's ServiceMain function when it starts.
   * Returns 0 for success, -1 for error.
   */
  int start_svc (ACE_Time_Value *wait_time = 0,
                 DWORD *svc_state = 0,
                 DWORD argc = 0, const ACE_TCHAR **argv = 0);

  /**
   * Requests the service to stop.  Will wait up to @a wait_time for
   * the service to actually stop.  If not specified, the function
   * waits until the service either stops or gets stuck in some other
   * state before it stops.  If @a svc_state is specified, it receives
   * the last reported state of the service.  Returns 0 if the request
   * was made successfully, -1 if not.
   */
  int stop_svc (ACE_Time_Value *wait_time = 0, DWORD *svc_state = 0);

  /// Pause the service.
  int pause_svc (ACE_Time_Value *wait_time = 0, DWORD *svc_state = 0);

  /// Continue the service.
  int continue_svc (ACE_Time_Value *wait_time = 0, DWORD *svc_state = 0);

  /**
   * Get the current state for the service.  If @a wait_hint is not 0,
   * it receives the service's reported wait hint.  Note that this
   * function returns 0 on failure (not -1 as is usual in ACE).  A
   * zero return would (probably) only be returned if there is either
   * no service with the given name in the SCM database, or the caller
   * does not have sufficient rights to access the service state.  The
   * set of valid service state values are all greater than 0.
   */
  DWORD state (ACE_Time_Value *wait_hint = 0);

  /// A version of <state> that returns -1 for failure, 0 for success.
  /// The DWORD pointed to by @a pstate receives the state value.
  int state (DWORD *pstate, ACE_Time_Value *wait_hint = 0);

  /**
   * Test access to the object's service in the SCM.  The service must
   * already have been inserted in the SCM database.  This function
   * has no affect on the service itself.  Returns 0 if the specified
   * access is allowed, -1 otherwise (either the access is denied, or
   * there is a problem with the service's definition - check
   * ACE_OS::last_error to get the specific error indication.
   */
  int test_access (DWORD desired_access = SERVICE_ALL_ACCESS);

  /// Declare the dynamic allocation hooks.
  ACE_ALLOC_HOOK_DECLARE;

protected:
  int report_status (DWORD new_status, DWORD time_hint = 0);

  /**
   * Return the svc_sc_handle_ member. If the member is null, it
   * retrieves the handle from the Service Control Manager and caches
   * it.
   */
  SC_HANDLE svc_sc_handle ();

  /**
   * Waits for the service to reach @a desired_state or get
   * (apparently) stuck before it reaches that state.  Will wait at
   * most @a wait_time to get to the desired state.  If @a wait_time is
   * 0, then the function keeps waiting until the desired state is
   * reached or the service doesn't update its state any further.  The
   * svc_status_ class member is updated upon return.
   */
  void wait_for_service_state (DWORD desired_state,
                               ACE_Time_Value *wait_time);

  /// Called by <handle_control> when a stop/shutdown was requested.
  virtual void stop_requested (DWORD control_code);

  /// Called by <handle_control> when a pause was requested.
  virtual void pause_requested (DWORD control_code);

  /// Called by <handle_control> when a continue was requested.
  virtual void continue_requested (DWORD control_code);

  /// Called by <handle_control> when a interrogate was requested.
  virtual void interrogate_requested (DWORD control_code);

protected:
  /// Estimate of init time needed
  DWORD start_time_;
  /// Service handle - doesn't need close.
  SERVICE_STATUS_HANDLE svc_handle_;
  SERVICE_STATUS svc_status_;

  /// Service's SCM handle
  SC_HANDLE svc_sc_handle_;
  ACE_TCHAR *name_;
  ACE_TCHAR *desc_;
  ACE_TCHAR *host_;

  /// ACE_Log_Msg attributes to inherit from the starting thread.
  ACE_OS_Log_Msg_Attributes  log_msg_attributes_;
};

ACE_END_VERSIONED_NAMESPACE_DECL

// These macros help to get things set up correctly at compile time
// and to take most of the grudge work out of creating the proper
// functions and doing the registrations.
//
// ACE_NT_SERVICE_DEFINE - defines the 'ServiceMain' function which NT will
//                         call in its own thread when the service control
//                         dispatcher starts.

#define ACE_NT_SERVICE_DEFINE(SVCNAME, SVCCLASS, SVCDESC)                   \
  ACE_NT_Service * _ace_nt_svc_obj_##SVCNAME = 0;                           \
  VOID WINAPI ace_nt_svc_handler_##SVCNAME (DWORD fdwControl) {             \
    _ace_nt_svc_obj_##SVCNAME->handle_control(fdwControl);                  \
  }                                                                         \
  VOID WINAPI ace_nt_svc_main_##SVCNAME (DWORD dwArgc,                      \
                                         ACE_TCHAR **lpszArgv) {            \
    bool delete_svc_obj = false;                                            \
    if (_ace_nt_svc_obj_##SVCNAME == 0) {                                   \
      ACE_NEW (_ace_nt_svc_obj_##SVCNAME, SVCCLASS);                        \
      if (_ace_nt_svc_obj_##SVCNAME == 0)                                   \
        return;                                                             \
      delete_svc_obj = true;                                                \
    }                                                                       \
    else                                                                    \
      _ace_nt_svc_obj_##SVCNAME->inherit_log_msg_attributes ();             \
    _ace_nt_svc_obj_##SVCNAME->init(dwArgc, lpszArgv);                      \
    _ace_nt_svc_obj_##SVCNAME->svc_handle(                                  \
                  ACE_TEXT_RegisterServiceCtrlHandler(SVCDESC,              \
                                          &ace_nt_svc_handler_##SVCNAME));  \
    _ace_nt_svc_obj_##SVCNAME->open();                                      \
    _ace_nt_svc_obj_##SVCNAME->wait();                                      \
    _ace_nt_svc_obj_##SVCNAME->fini();                                      \
    if (delete_svc_obj) {                                                   \
      delete _ace_nt_svc_obj_##SVCNAME;                                     \
      _ace_nt_svc_obj_##SVCNAME = 0;                                        \
    }                                                                       \
    return;                                                                 \
  }

#define ACE_NT_SERVICE_REFERENCE(SVCNAME)                                  \
extern ACE_NT_Service * _ace_nt_svc_obj_##SVCNAME;                         \
extern VOID WINAPI ace_nt_svc_main_##SVCNAME (DWORD dwArgc,                \
                                              ACE_TCHAR **lpszArgv);

#define ACE_NT_SERVICE_ENTRY(SVCDESC, SVCNAME)                             \
                      { const_cast<ACE_TCHAR*> (SVCDESC),                  \
                        &ace_nt_svc_main_##SVCNAME }

#define ACE_NT_SERVICE_RUN(SVCNAME, SVCINSTANCE, RET)                      \
  ACE_TEXT_SERVICE_TABLE_ENTRY _ace_nt_svc_table[2] =                      \
  {                                                                        \
    ACE_NT_SERVICE_ENTRY(ACE_TEXT (#SVCNAME), SVCNAME),                    \
    { 0, 0 }                                                               \
  };                                                                       \
  _ace_nt_svc_obj_##SVCNAME = SVCINSTANCE;                                 \
  _ace_nt_svc_obj_##SVCNAME->capture_log_msg_attributes ();                \
  ACE_OS::last_error (0);                                                  \
  int RET = ACE_TEXT_StartServiceCtrlDispatcher(_ace_nt_svc_table);

#if defined (__ACE_INLINE__)
#include "ace/NT_Service.inl"
#endif /* __ACE_INLINE__ */

#endif /* ACE_WIN32 */

#include /**/ "ace/post.h"

#endif /* ACE_SERVICE_OBJECT_H */