Indentation fix, cleanup.

[AROS.git] / _gdbinit

handle SIGUSR1 pass noprint nostop
handle SIGUSR2 pass noprint nostop
set follow-fork-mode child

define log_to_file
  set logging file $arg0
  set logging redirect on
  set logging overwrite $arg1
  set logging on
end

define end_log
  set logging off
end

# Define $symbol = (type)addr if it exists,  undefined if not
define symbol_check
  log_to_file symbol.tmp on
  p $arg0
  end_log

  shell sed -i -e '/^[^\$]/d' -e 's/^\$[0-9]* =/set $'$arg0' =/' symbol.tmp
  source symbol.tmp
end

# This is a bit tricky, because we have several cases,
# and gdb has no easy 'is this symbol defined' tests.
#
# Case 1: Hosted AROSBootstrap (ie linux-i386)
#         Provides SysBase, Debug_ModList, and Debug_KickList
# Case 2: ROM (ie amiga-m68k)
#         Provides AbsExecBase and SysBase
#
# AROSBootstrap does not define 'struct IntExecBase', so we
# can't use it.
#
define _sysbase_init
    init-if-undefined $AbsExecBase = 0
    init-if-undefined $SysBase = 0
    symbol_check AbsExecBase
    symbol_check SysBase
    if $SysBase != 0 && $AbsExecBase == 0
        set $AbsExecBase = $SysBase
    end
    if $SysBase == 0 && $AbsExecBase != 0
        set $SysBase = $AbsExecBase
    end
end
document _sysbase_init
Initialize $AbsExecBase convenience variables
end

define _debug_init
    _sysbase_init
    symbol_check Debug_ModList

    init-if-undefined $Debug_ModList = 0
    init-if-undefined $_debug_DebugBase = 0

    if $_debug_DebugBase == 0
        if $Debug_ModList == 0
            set $_debug_DebugBase = (struct DebugBase *)($AbsExecBase->DebugBase)
            # This is the case for debugging a ROM
            set $_debug_ModList = &($_debug_DebugBase->db_Modules)
        else
           set $_debug_ModList = $Debug_ModList
        end
    end
end
document _debug_init
Initialize debugging convenience variables
end

define liblist
    _sysbase_init
    set $lib = ((struct ExecBase *)$AbsExecBase)->LibList.lh_Head

    printf "Base     OpenC   Name\n"
    printf "---------------------------------------------------------------\n"
    while ($lib->ln_Succ != 0)
    printf "%p %5d   %s\n", \
        $lib, \
        ((struct Library *)$lib)->lib_OpenCnt, \
        $lib->ln_Name
    set $lib = $lib->ln_Succ
    end
end
document liblist
List the current libraries in the system
end

define devlist
    _debug_init
    set $dev = ((struct ExecBase *)$AbsExecBase)->DeviceList.lh_Head
    printf "Base     OpenC   Name\n"
    printf "---------------------------------------------------------------\n"
    while ($dev->ln_Succ != 0)
    printf "%p %5d   %s\n", \
        $dev, \
        ((struct Library *)$dev)->lib_OpenCnt, \
        $dev->ln_Name
    set $dev = $dev->ln_Succ
    end
end
document devlist
List the current devices in the system
end

define resourcelist
    _debug_init
    set $res = ((struct ExecBase *)$AbsExecBase)->ResourceList.lh_Head
    printf "Base     Name\n"
    printf "---------------------------------------------------------------\n"
    while ($res->ln_Succ != 0)
    printf "%p %s\n", $res, $res->ln_Name
    set $res = $res->ln_Succ
    end
end
document resourcelist
List the current resources in the system
end

define residentlist
    _debug_init
    set $resp = (struct Resident **)((struct ExecBase *)$AbsExecBase)->ResModules
    set $i = 0

    printf "Address    Pri Flags Vers Type  Name\n"
    printf "--------------------------------------------------------------\n"
    while (($resp)[$i] != 0)
    set $res = ($resp)[$i]
    printf "%p  %4d    %02x  %3d  %3d  %s\n", \
        $res, \
        ((struct Resident *)$res)->rt_Pri, \
        ((struct Resident *)$res)->rt_Flags, \
        ((struct Resident *)$res)->rt_Version, \
        ((struct Resident *)$res)->rt_Type, \
        ((struct Resident *)$res)->rt_Name
    set $i = $i + 1
    end
end
document residentlist
List the system resident list
end

define taskready
    _debug_init
    set $task = (struct Task *)((struct ExecBase *)$AbsExecBase)->TaskReady.lh_Head

    printf "Task     SigWait  SigRecvd StkSize   StkUsed Pri Type Name\n"
    printf "-----------------------------------------------------------------------------\n"
    while ($task->tc_Node.ln_Succ != 0)
    printf "%p %p %p %8d %8d %3d  %3ld %s\n", \
        $task, \
        $task->tc_SigWait, \
        $task->tc_SigRecvd, \
        $task->tc_SPUpper - $task->tc_SPLower, \
        $task->tc_SPUpper - $task->tc_SPReg, \
        $task->tc_Node.ln_Pri, \
        $task->tc_Node.ln_Type, \
        $task->tc_Node.ln_Name
    set $task = (struct Task *)$task->tc_Node.ln_Succ
    end
end
document taskready
List of tasks currently ready to run
end

define taskwait
    _debug_init
    set $task = (struct Task *)((struct ExecBase *)$AbsExecBase)->TaskWait.lh_Head

    printf "Task     SigWait  SigRecvd StkSize   StkUsed Pri Type Name\n"
    printf "-----------------------------------------------------------------------------\n"
    while ($task->tc_Node.ln_Succ != 0)
    printf "%p %p %p %8d %8d %3d  %3ld %s\n", \
        $task, \
        $task->tc_SigWait, \
        $task->tc_SigRecvd, \
        $task->tc_SPUpper - $task->tc_SPLower, \
        $task->tc_SPUpper - $task->tc_SPReg, \
        $task->tc_Node.ln_Pri, \
        $task->tc_Node.ln_Type, \
        $task->tc_Node.ln_Name
    set $task = (struct Task *)$task->tc_Node.ln_Succ
    end
end
document taskwait
List of tasks currently waiting for an event
end

define thistask
    _debug_init
    set $task = (struct Task *)((struct ExecBase *)$AbsExecBase)->ThisTask
    printf "Task     SigWait  SigRecvd StkSize   StkUsed Pri Type Name\n"
    printf "-----------------------------------------------------------------------------\n"
    printf "%p %p %p %8d %8d %3d  %3ld %s\n", \
    $task, \
    $task->tc_SigWait, \
    $task->tc_SigRecvd, \
    $task->tc_SPUpper - $task->tc_SPLower, \
    $task->tc_SPUpper - $task->tc_SPReg, \
    $task->tc_Node.ln_Pri, \
    $task->tc_Node.ln_Type, \
    $task->tc_Node.ln_Name
end
document thistask
Print out information about the currently running task.
end

define modlist
    _debug_init
    printf "Segment                                   Module\n"

    if $_debug_ModList
        printf "---------------------------------------------------------------------\n"
        set $modnode = (module_t *)$_debug_ModList->mlh_Head

        while ($modnode->m_node.mln_Succ != 0)
            set $segidx = 0
            while ($segidx < $modnode->m_segcnt)
                set $segnode = $modnode->m_segments[$segidx]
                printf "%p %12s %2u %42s\n", $segnode->s_lowest, $segnode->s_name, $segnode->s_num, $segnode->s_mod->m_name
                set $segidx = $segidx + 1
            end

            set $modnode = (module_t *)$modnode->m_node.mln_Succ
        end
    end
end
document modlist
List of all the modules currently loaded in memory
end

# Execute a binary search over sorter array of segments
# Keep this function synchronized with decodelocation.c, FindSegmentInModule
define find_segment_in_module
    set $arg_address = $arg0
    set $arg_mod = $arg1
    set $find_segment_in_module_result = 0
    set $local_minsegidx = 0
    set $local_maxsegidx = $arg_mod->m_segcnt - 1
    set $_again = 1

    while ($_again == 1)
        set $local_segidx = ($local_maxsegidx + $local_minsegidx) / 2

        if $arg_mod->m_segments[$local_segidx]->s_lowest <= $arg_address
            if $arg_mod->m_segments[$local_segidx]->s_highest >= $arg_address
                set $find_segment_in_module_result = $arg_mod->m_segments[$local_segidx]
                loop_break
            else
                set $local_minsegidx = $local_segidx + 1
            end
        else
            set $local_maxsegidx = $local_segidx - 1
        end

        if $local_maxsegidx < $local_minsegidx
            # Not found, aborting
            loop_break
        end
    end
end

# Keep this function synchronized with decodelocation.c, FindSegment
define find_segment
    _debug_init
    set $find_segment_result = 0

    if $_debug_ModList
        set $modnode = (module_t *)$_debug_ModList->mlh_Head

        while ($modnode->m_node.mln_Succ != 0)
            if !($modnode->m_gaplowest <= $arg0 && $modnode->m_gaphighest >= $arg0)
                if $modnode->m_lowest <= $arg0 && $modnode->m_highest >= $arg0

                    find_segment_in_module $arg0 $modnode

                    if $find_segment_in_module_result
                        set $find_segment_result = $find_segment_in_module_result
                        loop_break
                    end
                end
            end
            set $modnode = (module_t *)$modnode->m_node.mln_Succ
        end
    end
end

define findaddr
    _debug_init
    set $cont = 1

    #first search in modules loaded from disk
    printf "Searching in the loaded modules...\n"

    find_segment $arg0

    if $find_segment_result
        set $segnode = $find_segment_result
        printf "Address found in %s, in segment %p.\nIf this is an executable, its .text section starts at %p.\n", $segnode->s_mod->m_name, $segnode->s_seg, $segnode->s_lowest
        set $cont = 0
    end

    #then in the resident list
    if $cont
        printf "Searching in the resident list...\n"
    end

    set $resp = (struct Resident **)((struct ExecBase *)$AbsExecBase)->ResModules
    set $i = 0

    while (($resp)[$i] != 0) && $cont
    set $res = ($resp)[$i]

        if ($arg0 >= $res) && ($arg0 <= $res->rt_EndSkip)
            printf "Address found in %s, which resides at %p\n", $res->rt_Name, $res
            set $cont = 0
        end

        set $i = $i + 1
    end

    if $cont
        printf "No matching module for this address\n"
    end
end
document findaddr
-Shows the module that contains the given address
-
-To debug a problem in AROS, do the following:
-
-1. Get a stacktrace with bt or similar.
-2. Use findaddr with such an address to find out in which
-   module it is:
-3. Use add-symbol-file to load that modules symbols.
-4. Now you can run bt (or similar) again and you should see the
-   addresses resolved as symbols.
-
-Example:
-
-0x4058d45b in ?? ()
-
-(gdb) findaddr 0x4058d45b
-
-Searching in the loaded modules...
-Address found in Workbench:contrib/Zune/Libs/muimaster.library, which is loaded at 0x405379a4.
-If this is an executable, its .text section starts at 0x405379b0.
-(gdb) add-symbol-file contrib/Zune/Libs/muimaster.library 0x405379b0
-add symbol table from file "contrib/Zune/Libs/muimaster.library" at
-        .text_addr = 0x405379b0
-(y or n) y
-Reading symbols from contrib/Zune/Libs/muimaster.library...done.
-(gdb) bt
-#0  0x4058d45b in strlen (ptr=0x80 <Address 0x80 out of bounds>) at strlen.c:45
-#1  0x00000000 in lastx.78 ()
end

define printtaglist
    set $list = (struct TagItem *)$arg0

    printf "Tag         Data (Hex)     Data (Dec)\n"
    printf "--------------------------------------\n"

    while $list->ti_Tag != 0
    # Handle the possible control tag...
    if $list->ti_Tag == 1
        printf "TAG_IGNORE\n"
    else if $list->ti_Tag == 2
        printf "TAG_MORE    %p\n", $list->ti_Data
        set $list = (struct TagItem *)$list->ti_Data
    else if $list->ti_Tag == 3
        printf "TAG_SKIP    %d\n", $list->ti_Data
        set $list = $list + $list->ti_Tag + 1
    else
        printf "%p  %p      %9lu\n", $list->ti_Tag, $list->ti_Data, $list->ti_Data
        set $list = $list + 1
    end
    end
    printf "TAG_DONE\n"
end
document printtaglist
end

define loadmod
    set pagination off
    set $this_mod = $arg0

    log_to_file segname.tmp on
    printf "%s", $this_mod->m_name
    end_log
    shell sed -i 's/.*:\(.*\)/\1/' segname.tmp
    log_to_file loadseg.tmp on
    printf "add-symbol-file \""
    end_log
    shell head -n1 segname.tmp >>loadseg.tmp
    log_to_file loadseg.tmp off
    printf "\" %s", $this_mod->m_seggdbhlp
    end_log

    source loadseg.tmp
    set pagination on
end

define loadseg
    _debug_init
    dont-repeat
    if $_debug_ModList
        set $step = 1

        find_segment $arg0

        if $find_segment_result
            # This is workaround for some flushing problem when loadseg.tmp had module name before command
            printf "\n"

            loadmod $find_segment_result->s_mod

            set $step = 2
        end

        if $step < 2
            printf "No matching module for this address\n"
        end

    end
end
document loadseg
Loads the module that contains the given address
end

define loadmods
    _debug_init

    if $_debug_ModList
        set $loadmods_modnode = (module_t *)$_debug_ModList->mlh_Head

        while ($loadmods_modnode->m_node.mln_Succ != 0)
            loadmod $loadmods_modnode
            set $loadmods_modnode = (module_t *)$loadmods_modnode->m_node.mln_Succ
        end
    end
end
document loadmods
Loads all the modules (symbols)
end

define loadframe
    log_to_file frameinfo.tmp on
    info frame $arg0
    end_log
    
    shell grep "eip =" frameinfo.tmp >loadseg.tmp
    shell sed -e 's/eip = \(0x[0-9,a-f]*\).*/loadseg \1/' loadseg.tmp >frameinfo.tmp
    
    source frameinfo.tmp
end
document loadframe
Loads the symbols for the given stack frame number
end

define loadframes
    set $_again = 1
    printf "\n\n"
    
    while ($_again == 1)
        bt
        printf "\nEnter stack frame number to resolve or RETURN to stop: \n\n"

        set $_answer = 1000

        shell read _gdb_answer && echo $_gdb_answer | grep -E "[0-9]+" | sed "s/\(.*\)/set \$_answer=\1/" >frameinfo.tmp

        source frameinfo.tmp
        printf "\n\n"

        if $_answer == 1000
            set $_again = 0
        else
            loadframe $_answer
        end
    end
end
document loadframes
Interactive multiple loading of symbols for given stack frame numbers
end

define loadbt
    set $_frame_counter = 0

    set $_again = 1
    while ($_again == 1)
        printf "Checking frame #%d\n", $_frame_counter

        set $_again = 0

        log_to_file loadseg.tmp on
        set pagination off
        bt
        end_log

        # Check if frame exists

        log_to_file frameinfo.tmp on
        printf "shell grep \"#%d .*\" loadseg.tmp | sed \"s/#.*/set \\$_again = 1/\" >loadbt.tmp\n", $_frame_counter
        end_log

        source frameinfo.tmp
        source loadbt.tmp

        if $_again == 1

            # If frame is unresolved ("in ??") transform to "loadseg address"
            
            log_to_file frameinfo.tmp on
            printf "shell grep \"#%d .* in ??\" loadseg.tmp | sed \"s/#.*\\(0x[0-9,a-f]*\\) .*/loadseg \\1/\" >loadbt.tmp\n", $_frame_counter
            end_log

            source frameinfo.tmp
            source loadbt.tmp

            set $_frame_counter = $_frame_counter + 1
            if ($_frame_counter == 1000)
                set $_again = 0
            end
        end
    end

    set pagination on
end
document loadbt
Tries to automatically load the symbols for all unresolved stack frames
end

define seglistdump
    _debug_init
    set $nextseg = $arg0
    set $count   = 1

    printf "Hunk num. | Start addr | Size       \n"
    printf "----------+------------+------------\n"
    while $nextseg
        printf "%9d | %p | %10d\n", $count, $nextseg + sizeof(BPTR), *((ULONG *)$nextseg - 1) - sizeof(BPTR)

        set $nextseg = *(BPTR *)$nextseg
        set $count = $count+1
    end
end
document seglistdump
Shows the segments chain of the given seglist
end

define bttask
    set $task = (struct Task *)$arg0
    if ($task->tc_Node.ln_Type != 1) && ($task->tc_Node.ln_Type != 13)
        printf "ERROR: Given address does not look like a task or process!\n"
    else
        #FIXME: The following assumes Linux x86
        set $old_esp = $esp
        set $old_eip = $eip
        
        if $task->tc_State == 2
            printf "WARNING: TS_RUN Task. Showing normal backtrace!\n"
        else
            set $esp = $task->tc_SPReg
            set $taskcontext = (struct AROSCPUContext *)$task->tc_UnionETask.tc_ETask.et_RegFrame
            set $eip = $taskcontext.regs.eip
        end
        
        bt
 
        set $esp = $old_esp
        set $eip = $old_eip
    end
end
document bttask
Shows the backtrace of the given TS_READY/TS_WAIT task
end

define semowner
    set $sem = (struct SignalSemaphore *)$arg0
    if $sem->ss_Link.ln_Type != 15
        printf "ERROR: Given address does not look like a semaphore!\n"
    else
        if $sem->ss_QueueCount == -1
            printf "The semaphore is free\n"
        else
            if $sem->ss_Owner == 0
                printf "The semaphore is locked in shared mode by one or more tasks\n"
            else
                    printf "The semaphore is owned by task %p (%s)\n", $sem->ss_Owner, $sem->ss_Owner->tc_Node.ln_Name
            end

            printf "\nWait Queue:\n\n"

            set $waitnode = (struct SemaphoreRequest *)$sem->ss_WaitQueue.mlh_Head

            while ($waitnode->sr_Link.mln_Succ != 0)
                set $waitertask = $waitnode->sr_Waiter
                if (int)$waitertask & 1
                    set $waitertask = $waitertask & ~1
                    printf " SHARED    "
                else
                    printf " EXCLUSIVE "
                end
                printf"%p %s\n", $waitertask, $waitertask->tc_Node.ln_Name
                set $waitnode = (struct SemaphoreRequest *)$waitnode->sr_Link.mln_Succ
            end
        end
    end
end
document semowner
Shows the owner of the given Exec Semaphore and the Wait Queue
end