arch/all-pc/boot/grub/netboot/3c595.c

   1 /*
   2 * 3c595.c -- 3COM 3C595 Fast Etherlink III PCI driver for etherboot
   3 *
   4 * Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp>
   5 * All rights reserved.
   6 * Mar. 14, 2000
   7 *
   8 *  This software may be used, modified, copied, distributed, and sold, in
   9 *  both source and binary form provided that the above copyright and these
  10 *  terms are retained. Under no circumstances are the authors responsible for
  11 *  the proper functioning of this software, nor do the authors assume any
  12 *  responsibility for damages incurred with its use.
  13 *
  14 * This code is based on Martin Renters' etherboot-4.4.3 3c509.c and
  15 * Herb Peyerl's FreeBSD 3.4-RELEASE if_vx.c driver.
  16 *
  17 *  Copyright (C) 1993-1994, David Greenman, Martin Renters.
  18 *  Copyright (C) 1993-1995, Andres Vega Garcia.
  19 *  Copyright (C) 1995, Serge Babkin.
  20 *
  21 *  Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
  22 *
  23 */
  24
  25 /* #define EDEBUG */
  26
  27 #include "etherboot.h"
  28 #include "nic.h"
  29 #include "pci.h"
  30 #include "3c595.h"
  31 #include "timer.h"
  32
  33 static unsigned short   eth_nic_base, eth_asic_base;
  34 static unsigned short   vx_connector, vx_connectors;
  35
  36 static struct connector_entry {
  37   int bit;
  38   char *name;
  39 } conn_tab[VX_CONNECTORS] = {
  40 #define CONNECTOR_UTP   0
  41   { 0x08, "utp"},
  42 #define CONNECTOR_AUI   1
  43   { 0x20, "aui"},
  44 /* dummy */
  45   { 0, "???"},
  46 #define CONNECTOR_BNC   3
  47   { 0x10, "bnc"},
  48 #define CONNECTOR_TX    4
  49   { 0x02, "tx"},
  50 #define CONNECTOR_FX    5
  51   { 0x04, "fx"},
  52 #define CONNECTOR_MII   6
  53   { 0x40, "mii"},
  54   { 0, "???"}
  55 };
  56
  57 static void vxgetlink(void);
  58 static void vxsetlink(void);
  59
  60 #define udelay(n)       waiton_timer2(((n)*TICKS_PER_MS)/1000)
  61
  62 /**************************************************************************
  63 ETH_RESET - Reset adapter
  64 ***************************************************************************/
  65 static void t595_reset(struct nic *nic)
  66 {
  67         int i, j;
  68
  69         /***********************************************************
  70                         Reset 3Com 595 card
  71         *************************************************************/
  72
  73         /* stop card */
  74         outw(RX_DISABLE, BASE + VX_COMMAND);
  75         outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
  76         VX_BUSY_WAIT;
  77         outw(TX_DISABLE, BASE + VX_COMMAND);
  78         outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
  79         udelay(8000);
  80         outw(RX_RESET, BASE + VX_COMMAND);
  81         VX_BUSY_WAIT;
  82         outw(TX_RESET, BASE + VX_COMMAND);
  83         VX_BUSY_WAIT;
  84         outw(C_INTR_LATCH, BASE + VX_COMMAND);
  85         outw(SET_RD_0_MASK, BASE + VX_COMMAND);
  86         outw(SET_INTR_MASK, BASE + VX_COMMAND);
  87         outw(SET_RX_FILTER, BASE + VX_COMMAND);
  88
  89         /*
  90         * initialize card
  91         */
  92         VX_BUSY_WAIT;
  93
  94         GO_WINDOW(0);
  95
  96         /* Disable the card */
  97 /*      outw(0, BASE + VX_W0_CONFIG_CTRL); */
  98
  99         /* Configure IRQ to none */
 100 /*      outw(SET_IRQ(0), BASE + VX_W0_RESOURCE_CFG); */
 101
 102         /* Enable the card */
 103 /*      outw(ENABLE_DRQ_IRQ, BASE + VX_W0_CONFIG_CTRL); */
 104
 105         GO_WINDOW(2);
 106
 107         /* Reload the ether_addr. */
 108         for (i = 0; i < ETH_ALEN; i++)
 109                 outb(nic->node_addr[i], BASE + VX_W2_ADDR_0 + i);
 110
 111         outw(RX_RESET, BASE + VX_COMMAND);
 112         VX_BUSY_WAIT;
 113         outw(TX_RESET, BASE + VX_COMMAND);
 114         VX_BUSY_WAIT;
 115
 116         /* Window 1 is operating window */
 117         GO_WINDOW(1);
 118         for (i = 0; i < 31; i++)
 119                 inb(BASE + VX_W1_TX_STATUS);
 120
 121         outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
 122                 S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
 123         outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
 124                 S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
 125
 126 /*
 127  * Attempt to get rid of any stray interrupts that occured during
 128  * configuration.  On the i386 this isn't possible because one may
 129  * already be queued.  However, a single stray interrupt is
 130  * unimportant.
 131  */
 132
 133         outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
 134
 135         outw(SET_RX_FILTER | FIL_INDIVIDUAL |
 136             FIL_BRDCST, BASE + VX_COMMAND);
 137
 138         vxsetlink();
 139 /*{
 140         int i,j;
 141         i = CONNECTOR_TX;
 142         GO_WINDOW(3);
 143         j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
 144         outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
 145         GO_WINDOW(4);
 146         outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
 147         GO_WINDOW(1);
 148 }*/
 149
 150         /* start tranciever and receiver */
 151         outw(RX_ENABLE, BASE + VX_COMMAND);
 152         outw(TX_ENABLE, BASE + VX_COMMAND);
 153
 154 }
 155
 156 /**************************************************************************
 157 ETH_TRANSMIT - Transmit a frame
 158 ***************************************************************************/
 159 static char padmap[] = {
 160         0, 3, 2, 1};
 161
 162 static void t595_transmit(
 163 struct nic *nic,
 164 const char *d,                  /* Destination */
 165 unsigned int t,                 /* Type */
 166 unsigned int s,                 /* size */
 167 const char *p)                  /* Packet */
 168 {
 169         register int len;
 170         int pad;
 171         int status;
 172
 173 #ifdef EDEBUG
 174         printf("{l=%d,t=%hX}",s+ETH_HLEN,t);
 175 #endif
 176
 177         /* swap bytes of type */
 178         t= htons(t);
 179
 180         len=s+ETH_HLEN; /* actual length of packet */
 181         pad = padmap[len & 3];
 182
 183         /*
 184         * The 3c595 automatically pads short packets to minimum ethernet length,
 185         * but we drop packets that are too large. Perhaps we should truncate
 186         * them instead?
 187         */
 188         if (len + pad > ETH_FRAME_LEN) {
 189                 return;
 190         }
 191
 192         /* drop acknowledgements */
 193         while(( status=inb(BASE + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
 194                 if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
 195                         outw(TX_RESET, BASE + VX_COMMAND);
 196                         outw(TX_ENABLE, BASE + VX_COMMAND);
 197                 }
 198
 199                 outb(0x0, BASE + VX_W1_TX_STATUS);
 200         }
 201
 202         while (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
 203                 /* no room in FIFO */
 204         }
 205
 206         outw(len, BASE + VX_W1_TX_PIO_WR_1);
 207         outw(0x0, BASE + VX_W1_TX_PIO_WR_1);    /* Second dword meaningless */
 208
 209         /* write packet */
 210         outsw(BASE + VX_W1_TX_PIO_WR_1, d, ETH_ALEN/2);
 211         outsw(BASE + VX_W1_TX_PIO_WR_1, nic->node_addr, ETH_ALEN/2);
 212         outw(t, BASE + VX_W1_TX_PIO_WR_1);
 213         outsw(BASE + VX_W1_TX_PIO_WR_1, p, s / 2);
 214         if (s & 1)
 215                 outb(*(p+s - 1), BASE + VX_W1_TX_PIO_WR_1);
 216
 217         while (pad--)
 218                 outb(0, BASE + VX_W1_TX_PIO_WR_1);      /* Padding */
 219
 220         /* wait for Tx complete */
 221         while((inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS) != 0)
 222                 ;
 223 }
 224
 225 /**************************************************************************
 226 ETH_POLL - Wait for a frame
 227 ***************************************************************************/
 228 static int t595_poll(struct nic *nic)
 229 {
 230         /* common variables */
 231         unsigned short type = 0;        /* used by EDEBUG */
 232         /* variables for 3C595 */
 233         short status, cst;
 234         register short rx_fifo;
 235
 236         cst=inw(BASE + VX_STATUS);
 237
 238 #ifdef EDEBUG
 239         if(cst & 0x1FFF)
 240                 printf("-%hX-",cst);
 241 #endif
 242
 243         if( (cst & S_RX_COMPLETE)==0 ) {
 244                 /* acknowledge  everything */
 245                 outw(ACK_INTR | cst, BASE + VX_COMMAND);
 246                 outw(C_INTR_LATCH, BASE + VX_COMMAND);
 247
 248                 return 0;
 249         }
 250
 251         status = inw(BASE + VX_W1_RX_STATUS);
 252 #ifdef EDEBUG
 253         printf("*%hX*",status);
 254 #endif
 255
 256         if (status & ERR_RX) {
 257                 outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
 258                 return 0;
 259         }
 260
 261         rx_fifo = status & RX_BYTES_MASK;
 262         if (rx_fifo==0)
 263                 return 0;
 264
 265                 /* read packet */
 266 #ifdef EDEBUG
 267         printf("[l=%d",rx_fifo);
 268 #endif
 269         insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet, rx_fifo / 2);
 270         if(rx_fifo & 1)
 271                 nic->packet[rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
 272         nic->packetlen=rx_fifo;
 273
 274         while(1) {
 275                 status = inw(BASE + VX_W1_RX_STATUS);
 276 #ifdef EDEBUG
 277                 printf("*%hX*",status);
 278 #endif
 279                 rx_fifo = status & RX_BYTES_MASK;
 280
 281                 if(rx_fifo>0) {
 282                         insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet+nic->packetlen, rx_fifo / 2);
 283                         if(rx_fifo & 1)
 284                                 nic->packet[nic->packetlen+rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
 285                         nic->packetlen+=rx_fifo;
 286 #ifdef EDEBUG
 287                         printf("+%d",rx_fifo);
 288 #endif
 289                 }
 290                 if(( status & RX_INCOMPLETE )==0) {
 291 #ifdef EDEBUG
 292                         printf("=%d",nic->packetlen);
 293 #endif
 294                         break;
 295                 }
 296                 udelay(1000);
 297         }
 298
 299         /* acknowledge reception of packet */
 300         outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
 301         while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS);
 302 #ifdef EDEBUG
 303         type = (nic->packet[12]<<8) | nic->packet[13];
 304         if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
 305             nic->packet[5] == 0xFF*ETH_ALEN)
 306                 printf(",t=%hX,b]",type);
 307         else
 308                 printf(",t=%hX]",type);
 309 #endif
 310         return 1;
 311 }
 312
 313
 314 /*************************************************************************
 315         3Com 595 - specific routines
 316 **************************************************************************/
 317
 318 static int
 319 eeprom_rdy()
 320 {
 321         int i;
 322
 323         for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++)
 324                 udelay(1000);
 325         if (i >= MAX_EEPROMBUSY) {
 326                 /* printf("3c595: eeprom failed to come ready.\n"); */
 327                 printf("3c595: eeprom is busy.\n"); /* memory in EPROM is tight */
 328                 return (0);
 329         }
 330         return (1);
 331 }
 332
 333 /*
 334  * get_e: gets a 16 bits word from the EEPROM. we must have set the window
 335  * before
 336  */
 337 static int
 338 get_e(offset)
 339 int offset;
 340 {
 341         if (!eeprom_rdy())
 342                 return (0xffff);
 343         outw(EEPROM_CMD_RD | offset, BASE + VX_W0_EEPROM_COMMAND);
 344         if (!eeprom_rdy())
 345                 return (0xffff);
 346         return (inw(BASE + VX_W0_EEPROM_DATA));
 347 }
 348
 349 static void
 350 vxgetlink(void)
 351 {
 352     int n, k;
 353
 354     GO_WINDOW(3);
 355     vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
 356     for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
 357       if (vx_connectors & conn_tab[k].bit) {
 358         if (n > 0) {
 359           printf("/");
 360         }
 361         printf(conn_tab[k].name);
 362         n++;
 363       }
 364     }
 365     if (vx_connectors == 0) {
 366         printf("no connectors!");
 367         return;
 368     }
 369     GO_WINDOW(3);
 370     vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG)
 371                         & INTERNAL_CONNECTOR_MASK)
 372                         >> INTERNAL_CONNECTOR_BITS;
 373     if (vx_connector & 0x10) {
 374         vx_connector &= 0x0f;
 375         printf("[*%s*]", conn_tab[vx_connector].name);
 376         printf(": disable 'auto select' with DOS util!");
 377     } else {
 378         printf("[*%s*]", conn_tab[vx_connector].name);
 379     }
 380 }
 381
 382 static void
 383 vxsetlink(void)
 384 {
 385     int i, j, k;
 386     char *reason, *warning;
 387     static short prev_flags;
 388     static char prev_conn = -1;
 389
 390     if (prev_conn == -1) {
 391         prev_conn = vx_connector;
 392     }
 393
 394     i = vx_connector;       /* default in EEPROM */
 395     reason = "default";
 396     warning = 0;
 397
 398     if ((vx_connectors & conn_tab[vx_connector].bit) == 0) {
 399         warning = "strange connector type in EEPROM.";
 400         reason = "forced";
 401         i = CONNECTOR_UTP;
 402     }
 403
 404         if (warning != 0) {
 405             printf("warning: %s\n", warning);
 406         }
 407         printf("selected %s. (%s)\n", conn_tab[i].name, reason);
 408
 409     /* Set the selected connector. */
 410     GO_WINDOW(3);
 411     j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
 412     outl(j | (i <<INTERNAL_CONNECTOR_BITS), BASE + VX_W3_INTERNAL_CFG);
 413
 414     /* First, disable all. */
 415     outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
 416     udelay(8000);
 417     GO_WINDOW(4);
 418     outw(0, BASE + VX_W4_MEDIA_TYPE);
 419
 420     /* Second, enable the selected one. */
 421     switch(i) {
 422       case CONNECTOR_UTP:
 423         GO_WINDOW(4);
 424         outw(ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
 425         break;
 426       case CONNECTOR_BNC:
 427         outw(START_TRANSCEIVER,BASE + VX_COMMAND);
 428         udelay(8000);
 429         break;
 430       case CONNECTOR_TX:
 431       case CONNECTOR_FX:
 432         GO_WINDOW(4);
 433         outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
 434         break;
 435       default:  /* AUI and MII fall here */
 436         break;
 437     }
 438     GO_WINDOW(1);
 439 }
 440
 441 static void t595_disable(struct nic *nic)
 442 {
 443     outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
 444     udelay(8000);
 445     GO_WINDOW(4);
 446     outw(0, BASE + VX_W4_MEDIA_TYPE);
 447     GO_WINDOW(1);
 448 }
 449
 450 /**************************************************************************
 451 ETH_PROBE - Look for an adapter
 452 ***************************************************************************/
 453 struct nic *t595_probe(struct nic *nic, unsigned short *probeaddrs, struct pci_device *pci)
 454 {
 455         int i;
 456         unsigned short *p;
 457
 458         if (probeaddrs == 0 || probeaddrs[0] == 0)
 459                 return 0;
 460 /*      eth_nic_base = probeaddrs[0] & ~3; */
 461         eth_nic_base = pci->ioaddr;
 462
 463         GO_WINDOW(0);
 464         outw(GLOBAL_RESET, BASE + VX_COMMAND);
 465         VX_BUSY_WAIT;
 466
 467         vxgetlink();
 468
 469 /*
 470         printf("\nEEPROM:");
 471         for (i = 0; i < (EEPROMSIZE/2); i++) {
 472           printf("%hX:", get_e(i));
 473         }
 474         printf("\n");
 475 */
 476         /*
 477         * Read the station address from the eeprom
 478         */
 479         p = (unsigned short *) nic->node_addr;
 480         for (i = 0; i < 3; i++) {
 481                 GO_WINDOW(0);
 482                 p[i] = htons(get_e(EEPROM_OEM_ADDR_0 + i));
 483                 GO_WINDOW(2);
 484                 outw(ntohs(p[i]), BASE + VX_W2_ADDR_0 + (i * 2));
 485         }
 486
 487         printf("Ethernet address: %!\n", nic->node_addr);
 488
 489         t595_reset(nic);
 490         nic->reset = t595_reset;
 491         nic->poll = t595_poll;
 492         nic->transmit = t595_transmit;
 493         nic->disable = t595_disable;
 494         return nic;
 495
 496 }
 497
 498 /*
 499  * Local variables:
 500  *  c-basic-offset: 8
 501  * End:
 502  */
 503