arch/all-pc/boot/grub/netboot/smc9000.c

   1  /*------------------------------------------------------------------------
   2  * smc9000.c
   3  * This is a Etherboot driver for SMC's 9000 series of Ethernet cards.
   4  *
   5  * Copyright (C) 1998 Daniel Engström <daniel.engstrom@riksnett.no>
   6  * Based on the Linux SMC9000 driver, smc9194.c by Eric Stahlman
   7  * Copyright (C) 1996 by Erik Stahlman <eric@vt.edu>
   8  *
   9  * This software may be used and distributed according to the terms
  10  * of the GNU Public License, incorporated herein by reference.
  11  *
  12  * "Features" of the SMC chip:
  13  *   4608 byte packet memory. ( for the 91C92/4.  Others have more )
  14  *   EEPROM for configuration
  15  *   AUI/TP selection
  16  *
  17  * Authors
  18  *      Erik Stahlman                           <erik@vt.edu>
  19  *      Daniel Engström                         <daniel.engstrom@riksnett.no>
  20  *
  21  * History
  22  * 98-09-25              Daniel Engström Etherboot driver crated from Eric's
  23  *                                       Linux driver.
  24  *
  25  *---------------------------------------------------------------------------*/
  26 #define LINUX_OUT_MACROS 1
  27 #define SMC9000_VERBOSE  1
  28 #define SMC9000_DEBUG    0
  29
  30 #include "etherboot.h"
  31 #include "nic.h"
  32 #include "cards.h"
  33 #include "smc9000.h"
  34
  35 # define _outb outb
  36 # define _outw outw
  37
  38 static const char       smc9000_version[] = "Version 0.99 98-09-30";
  39 static unsigned int     smc9000_base=0;
  40 static const char       *interfaces[ 2 ] = { "TP", "AUI" };
  41 static const char       *chip_ids[ 15 ] =  {
  42    NULL, NULL, NULL,
  43    /* 3 */ "SMC91C90/91C92",
  44    /* 4 */ "SMC91C94",
  45    /* 5 */ "SMC91C95",
  46    NULL,
  47    /* 7 */ "SMC91C100",
  48    /* 8 */ "SMC91C100FD",
  49    NULL, NULL, NULL,
  50    NULL, NULL, NULL
  51 };
  52 static const char      smc91c96_id[] = "SMC91C96";
  53
  54 /*
  55  * Function: smc_reset( int ioaddr )
  56  * Purpose:
  57  *      This sets the SMC91xx chip to its normal state, hopefully from whatever
  58  *      mess that any other DOS driver has put it in.
  59  *
  60  * Maybe I should reset more registers to defaults in here?  SOFTRESET  should
  61  * do that for me.
  62  *
  63  * Method:
  64  *      1.  send a SOFT RESET
  65  *      2.  wait for it to finish
  66  *      3.  reset the memory management unit
  67  *      4.  clear all interrupts
  68  *
  69 */
  70 static void smc_reset(int ioaddr)
  71 {
  72    /* This resets the registers mostly to defaults, but doesn't
  73     * affect EEPROM.  That seems unnecessary */
  74    SMC_SELECT_BANK(ioaddr, 0);
  75    _outw( RCR_SOFTRESET, ioaddr + RCR );
  76
  77    /* this should pause enough for the chip to be happy */
  78    SMC_DELAY(ioaddr);
  79
  80    /* Set the transmit and receive configuration registers to
  81     * default values */
  82    _outw(RCR_CLEAR, ioaddr + RCR);
  83    _outw(TCR_CLEAR, ioaddr + TCR);
  84
  85    /* Reset the MMU */
  86    SMC_SELECT_BANK(ioaddr, 2);
  87    _outw( MC_RESET, ioaddr + MMU_CMD );
  88
  89    /* Note:  It doesn't seem that waiting for the MMU busy is needed here,
  90     * but this is a place where future chipsets _COULD_ break.  Be wary
  91     * of issuing another MMU command right after this */
  92    _outb(0, ioaddr + INT_MASK);
  93 }
  94
  95
  96 /*----------------------------------------------------------------------
  97  * Function: smc_probe( int ioaddr )
  98  *
  99  * Purpose:
 100  *      Tests to see if a given ioaddr points to an SMC9xxx chip.
 101  *      Returns a 0 on success
 102  *
 103  * Algorithm:
 104  *      (1) see if the high byte of BANK_SELECT is 0x33
 105  *      (2) compare the ioaddr with the base register's address
 106  *      (3) see if I recognize the chip ID in the appropriate register
 107  *
 108  * ---------------------------------------------------------------------
 109  */
 110 static int smc_probe( int ioaddr )
 111 {
 112    word bank;
 113    word revision_register;
 114    word base_address_register;
 115
 116    /* First, see if the high byte is 0x33 */
 117    bank = inw(ioaddr + BANK_SELECT);
 118    if ((bank & 0xFF00) != 0x3300) {
 119       return -1;
 120    }
 121    /* The above MIGHT indicate a device, but I need to write to further
 122     *   test this.  */
 123    _outw(0x0, ioaddr + BANK_SELECT);
 124    bank = inw(ioaddr + BANK_SELECT);
 125    if ((bank & 0xFF00) != 0x3300) {
 126       return -1;
 127    }
 128
 129    /* well, we've already written once, so hopefully another time won't
 130     *  hurt.  This time, I need to switch the bank register to bank 1,
 131     *  so I can access the base address register */
 132    SMC_SELECT_BANK(ioaddr, 1);
 133    base_address_register = inw(ioaddr + BASE);
 134
 135    if (ioaddr != (base_address_register >> 3 & 0x3E0))  {
 136 #ifdef  SMC9000_VERBOSE
 137       printf("SMC9000: IOADDR %hX doesn't match configuration (%hX)."
 138              "Probably not a SMC chip\n",
 139              ioaddr, base_address_register >> 3 & 0x3E0);
 140 #endif
 141       /* well, the base address register didn't match.  Must not have
 142        * been a SMC chip after all. */
 143       return -1;
 144    }
 145
 146
 147    /* check if the revision register is something that I recognize.
 148     * These might need to be added to later, as future revisions
 149     * could be added.  */
 150    SMC_SELECT_BANK(ioaddr, 3);
 151    revision_register  = inw(ioaddr + REVISION);
 152    if (!chip_ids[(revision_register >> 4) & 0xF]) {
 153       /* I don't recognize this chip, so... */
 154 #ifdef  SMC9000_VERBOSE
 155       printf("SMC9000: IO %hX: Unrecognized revision register:"
 156              " %hX, Contact author.\n", ioaddr, revision_register);
 157 #endif
 158       return -1;
 159    }
 160
 161    /* at this point I'll assume that the chip is an SMC9xxx.
 162     * It might be prudent to check a listing of MAC addresses
 163     * against the hardware address, or do some other tests. */
 164    return 0;
 165 }
 166
 167
 168 /**************************************************************************
 169  * ETH_RESET - Reset adapter
 170  ***************************************************************************/
 171
 172 static void smc9000_reset(struct nic *nic)
 173 {
 174    smc_reset(smc9000_base);
 175 }
 176
 177 /**************************************************************************
 178  * ETH_TRANSMIT - Transmit a frame
 179  ***************************************************************************/
 180 static void smc9000_transmit(
 181         struct nic *nic,
 182         const char *d,                  /* Destination */
 183         unsigned int t,                 /* Type */
 184         unsigned int s,                 /* size */
 185         const char *p)                  /* Packet */
 186 {
 187    word length; /* real, length incl. header */
 188    word numPages;
 189    unsigned long time_out;
 190    byte packet_no;
 191    word status;
 192    int i;
 193
 194    /* We dont pad here since we can have the hardware doing it for us */
 195    length = (s + ETH_HLEN + 1)&~1;
 196
 197    /* convert to MMU pages */
 198    numPages = length / 256;
 199
 200    if (numPages > 7 ) {
 201 #ifdef  SMC9000_VERBOSE
 202       printf("SMC9000: Far too big packet error. \n");
 203 #endif
 204       return;
 205    }
 206
 207    /* dont try more than, say 30 times */
 208    for (i=0;i<30;i++) {
 209       /* now, try to allocate the memory */
 210       SMC_SELECT_BANK(smc9000_base, 2);
 211       _outw(MC_ALLOC | numPages, smc9000_base + MMU_CMD);
 212
 213       status = 0;
 214       /* wait for the memory allocation to finnish */
 215       for (time_out = currticks() + 5*TICKS_PER_SEC; currticks() < time_out; ) {
 216          status = inb(smc9000_base + INTERRUPT);
 217          if ( status & IM_ALLOC_INT ) {
 218             /* acknowledge the interrupt */
 219             _outb(IM_ALLOC_INT, smc9000_base + INTERRUPT);
 220             break;
 221          }
 222       }
 223
 224       if ((status & IM_ALLOC_INT) != 0 ) {
 225          /* We've got the memory */
 226          break;
 227       } else {
 228          printf("SMC9000: Memory allocation timed out, resetting MMU.\n");
 229          _outw(MC_RESET, smc9000_base + MMU_CMD);
 230       }
 231    }
 232
 233    /* If I get here, I _know_ there is a packet slot waiting for me */
 234    packet_no = inb(smc9000_base + PNR_ARR + 1);
 235    if (packet_no & 0x80) {
 236       /* or isn't there?  BAD CHIP! */
 237       printf("SMC9000: Memory allocation failed. \n");
 238       return;
 239    }
 240
 241    /* we have a packet address, so tell the card to use it */
 242    _outb(packet_no, smc9000_base + PNR_ARR);
 243
 244    /* point to the beginning of the packet */
 245    _outw(PTR_AUTOINC, smc9000_base + POINTER);
 246
 247 #if     SMC9000_DEBUG > 2
 248    printf("Trying to xmit packet of length %hX\n", length );
 249 #endif
 250
 251    /* send the packet length ( +6 for status, length and ctl byte )
 252     * and the status word ( set to zeros ) */
 253    _outw(0, smc9000_base + DATA_1 );
 254
 255    /* send the packet length ( +6 for status words, length, and ctl) */
 256    _outb((length+6) & 0xFF,  smc9000_base + DATA_1);
 257    _outb((length+6) >> 8 ,   smc9000_base + DATA_1);
 258
 259    /* Write the contents of the packet */
 260
 261    /* The ethernet header first... */
 262    outsw(smc9000_base + DATA_1, d, ETH_ALEN >> 1);
 263    outsw(smc9000_base + DATA_1, nic->node_addr, ETH_ALEN >> 1);
 264    _outw(htons(t), smc9000_base + DATA_1);
 265
 266    /* ... the data ... */
 267    outsw(smc9000_base + DATA_1 , p, s >> 1);
 268
 269    /* ... and the last byte, if there is one.   */
 270    if ((s & 1) == 0) {
 271       _outw(0, smc9000_base + DATA_1);
 272    } else {
 273       _outb(p[s-1], smc9000_base + DATA_1);
 274       _outb(0x20, smc9000_base + DATA_1);
 275    }
 276
 277    /* and let the chipset deal with it */
 278    _outw(MC_ENQUEUE , smc9000_base + MMU_CMD);
 279
 280    status = 0; time_out = currticks() + 5*TICKS_PER_SEC;
 281    do {
 282       status = inb(smc9000_base + INTERRUPT);
 283
 284       if ((status & IM_TX_INT ) != 0) {
 285          word tx_status;
 286
 287          /* ack interrupt */
 288          _outb(IM_TX_INT, smc9000_base + INTERRUPT);
 289
 290          packet_no = inw(smc9000_base + FIFO_PORTS);
 291          packet_no &= 0x7F;
 292
 293          /* select this as the packet to read from */
 294          _outb( packet_no, smc9000_base + PNR_ARR );
 295
 296          /* read the first word from this packet */
 297          _outw( PTR_AUTOINC | PTR_READ, smc9000_base + POINTER );
 298
 299          tx_status = inw( smc9000_base + DATA_1 );
 300
 301          if (0 == (tx_status & TS_SUCCESS)) {
 302 #ifdef  SMC9000_VERBOSE
 303             printf("SMC9000: TX FAIL STATUS: %hX \n", tx_status);
 304 #endif
 305             /* re-enable transmit */
 306             SMC_SELECT_BANK(smc9000_base, 0);
 307             _outw(inw(smc9000_base + TCR ) | TCR_ENABLE, smc9000_base + TCR );
 308          }
 309
 310          /* kill the packet */
 311          SMC_SELECT_BANK(smc9000_base, 2);
 312          _outw(MC_FREEPKT, smc9000_base + MMU_CMD);
 313
 314          return;
 315       }
 316    }while(currticks() < time_out);
 317
 318    printf("SMC9000: Waring TX timed out, resetting board\n");
 319    smc_reset(smc9000_base);
 320    return;
 321 }
 322
 323 /**************************************************************************
 324  * ETH_POLL - Wait for a frame
 325  ***************************************************************************/
 326 static int smc9000_poll(struct nic *nic)
 327 {
 328    if(!smc9000_base)
 329      return 0;
 330
 331    SMC_SELECT_BANK(smc9000_base, 2);
 332    if (inw(smc9000_base + FIFO_PORTS) & FP_RXEMPTY)
 333      return 0;
 334
 335    /*  start reading from the start of the packet */
 336    _outw(PTR_READ | PTR_RCV | PTR_AUTOINC, smc9000_base + POINTER);
 337
 338    /* First read the status and check that we're ok */
 339    if (!(inw(smc9000_base + DATA_1) & RS_ERRORS)) {
 340       /* Next: read the packet length and mask off the top bits */
 341       nic->packetlen = (inw(smc9000_base + DATA_1) & 0x07ff);
 342
 343       /* the packet length includes the 3 extra words */
 344       nic->packetlen -= 6;
 345 #if     SMC9000_DEBUG > 2
 346       printf(" Reading %d words (and %d byte(s))\n",
 347                (nic->packetlen >> 1), nic->packetlen & 1);
 348 #endif
 349       /* read the packet (and the last "extra" word) */
 350       insw(smc9000_base + DATA_1, nic->packet, (nic->packetlen+2) >> 1);
 351       /* is there an odd last byte ? */
 352       if (nic->packet[nic->packetlen+1] & 0x20)
 353          nic->packetlen++;
 354
 355       /*  error or good, tell the card to get rid of this packet */
 356       _outw(MC_RELEASE, smc9000_base + MMU_CMD);
 357       return 1;
 358    }
 359
 360    printf("SMC9000: RX error\n");
 361    /*  error or good, tell the card to get rid of this packet */
 362    _outw(MC_RELEASE, smc9000_base + MMU_CMD);
 363    return 0;
 364 }
 365
 366 static void smc9000_disable(struct nic *nic)
 367 {
 368    if(!smc9000_base)
 369      return;
 370
 371    /* no more interrupts for me */
 372    SMC_SELECT_BANK(smc9000_base, 2);
 373    _outb( 0, smc9000_base + INT_MASK);
 374
 375    /* and tell the card to stay away from that nasty outside world */
 376    SMC_SELECT_BANK(smc9000_base, 0);
 377    _outb( RCR_CLEAR, smc9000_base + RCR );
 378    _outb( TCR_CLEAR, smc9000_base + TCR );
 379 }
 380
 381 /**************************************************************************
 382  * ETH_PROBE - Look for an adapter
 383  ***************************************************************************/
 384
 385 struct nic *smc9000_probe(struct nic *nic, unsigned short *probe_addrs)
 386 {
 387    unsigned short   revision;
 388    int              memory;
 389    int              media;
 390    const char *     version_string;
 391    const char *     if_string;
 392    int              i;
 393
 394    /*
 395     * the SMC9000 can be at any of the following port addresses.  To change,
 396     * for a slightly different card, you can add it to the array.  Keep in
 397     * mind that the array must end in zero.
 398     */
 399    static unsigned short portlist[] = {
 400 #ifdef  SMC9000_SCAN
 401       SMC9000_SCAN,
 402 #else
 403       0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
 404       0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, 0x3E0,
 405 #endif
 406       0 };
 407
 408    printf("\nSMC9000 %s\n", smc9000_version);
 409 #ifdef  SMC9000_VERBOSE
 410    printf("Copyright (C) 1998 Daniel Engstr\x94m\n");
 411    printf("Copyright (C) 1996 Eric Stahlman\n");
 412 #endif
 413    /* if no addresses supplied, fall back on defaults */
 414    if (probe_addrs == 0 || probe_addrs[0] == 0)
 415      probe_addrs = portlist;
 416
 417    /* check every ethernet address */
 418    for (i = 0; probe_addrs[i]; i++) {
 419       /* check this specific address */
 420       if (smc_probe(probe_addrs[i]) == 0)
 421         smc9000_base = probe_addrs[i];
 422    }
 423
 424    /* couldn't find anything */
 425    if(0 == smc9000_base)
 426      goto out;
 427
 428    /*
 429     * Get the MAC address ( bank 1, regs 4 - 9 )
 430     */
 431    SMC_SELECT_BANK(smc9000_base, 1);
 432    for ( i = 0; i < 6; i += 2 ) {
 433       word address;
 434
 435       address = inw(smc9000_base + ADDR0 + i);
 436       nic->node_addr[i+1] = address >> 8;
 437       nic->node_addr[i] = address & 0xFF;
 438    }
 439
 440
 441    /* get the memory information */
 442    SMC_SELECT_BANK(smc9000_base, 0);
 443    memory = ( inw(smc9000_base + MCR) >> 9 )  & 0x7;  /* multiplier */
 444    memory *= 256 * (inw(smc9000_base + MIR) & 0xFF);
 445
 446    /*
 447     * Now, I want to find out more about the chip.  This is sort of
 448     * redundant, but it's cleaner to have it in both, rather than having
 449     * one VERY long probe procedure.
 450     */
 451    SMC_SELECT_BANK(smc9000_base, 3);
 452    revision  = inw(smc9000_base + REVISION);
 453    version_string = chip_ids[(revision >> 4) & 0xF];
 454
 455    if (((revision & 0xF0) >> 4 == CHIP_9196) &&
 456        ((revision & 0x0F) >= REV_9196)) {
 457       /* This is a 91c96. 'c96 has the same chip id as 'c94 (4) but
 458        * a revision starting at 6 */
 459       version_string = smc91c96_id;
 460    }
 461
 462    if ( !version_string ) {
 463       /* I shouldn't get here because this call was done before.... */
 464       goto out;
 465    }
 466
 467    /* is it using AUI or 10BaseT ? */
 468    SMC_SELECT_BANK(smc9000_base, 1);
 469    if (inw(smc9000_base + CONFIG) & CFG_AUI_SELECT)
 470      media = 2;
 471    else
 472      media = 1;
 473
 474    if_string = interfaces[media - 1];
 475
 476    /* now, reset the chip, and put it into a known state */
 477    smc_reset(smc9000_base);
 478
 479    printf("%s rev:%d I/O port:%hX Interface:%s RAM:%d bytes \n",
 480           version_string, revision & 0xF,
 481           smc9000_base, if_string, memory );
 482    /*
 483     * Print the Ethernet address
 484     */
 485    printf("Ethernet MAC address: %!\n", nic->node_addr);
 486
 487    SMC_SELECT_BANK(smc9000_base, 0);
 488
 489    /* see the header file for options in TCR/RCR NORMAL*/
 490    _outw(TCR_NORMAL, smc9000_base + TCR);
 491    _outw(RCR_NORMAL, smc9000_base + RCR);
 492
 493    /* Select which interface to use */
 494    SMC_SELECT_BANK(smc9000_base, 1);
 495    if ( media == 1 ) {
 496       _outw( inw( smc9000_base + CONFIG ) & ~CFG_AUI_SELECT,
 497            smc9000_base + CONFIG );
 498    }
 499    else if ( media == 2 ) {
 500       _outw( inw( smc9000_base + CONFIG ) | CFG_AUI_SELECT,
 501            smc9000_base + CONFIG );
 502    }
 503
 504    nic->reset = smc9000_reset;
 505    nic->poll = smc9000_poll;
 506    nic->transmit = smc9000_transmit;
 507    nic->disable = smc9000_disable;
 508
 509
 510    return nic;
 511
 512 out:
 513 #ifdef  SMC9000_VERBOSE
 514    printf("No SMC9000 adapters found\n");
 515 #endif
 516    smc9000_base = 0;
 517
 518    return (0);
 519 }
 520
 521
 522