scripts/gimmearos-v1.sh

   1 #!/bin/bash
   2
   3 # Script for building AROS from the Subversion repository
   4
   5 # Currently only a limited amount of Linux distros is supported.
   6 # If you improve this script, send modifications back to me, please.
   7 # Matthias Rustler, mailto:mrustler@gmx.de
   8
   9 # This script is public domain. Use it at your own risk.
  10
  11 # $VER: gimmearos-v1.sh 1.12 (08.02.2015) WIP
  12
  13 curdir="`pwd`"
  14 srcdir="aros-src"
  15 portsdir="$HOME/aros-ports-src"
  16 tooldir="$HOME/aros-toolchain"
  17 makeopts="-j2 -s"
  18
  19 install_pkg()
  20 {
  21     if [ $# -ne 2 ]
  22     then
  23         echo "install_pkg() needs 2 arguments"
  24         exit 100
  25     fi
  26     echo -e "\nInstalling " $2
  27     sudo $1 $2
  28     if [ $? -ne 0 ]
  29     then
  30         echo -e "\n    install failed. Script cancelled."
  31         exit 100
  32     fi
  33 }
  34
  35
  36 echo -e "\n\n\n\n\n"
  37 echo -e "***********************************************"
  38 echo -e "* Script for downloading and building of AROS *"
  39 echo -e "***********************************************"
  40 echo -e "\n\n"
  41 echo -e "*********************************"
  42 echo -e "* Step 1: install prerequisites *"
  43 echo -e "*********************************"
  44 echo -e "The build system needs some packages to do its job."
  45 echo -e "If you are asked for a password enter you admin password."
  46 echo -e "\n1 .. Get packages with apt-get for Debian and similar (e.g. Ubuntu)"
  47 echo -e "     for building 32-bit AROS on 32-bit Linux or 64-bit-AROS on 64-bit-Linux"
  48 echo -e "2 .. As 1) but with additional packages for building 32-bit AROS"
  49 echo -e "     on 64-bit Linux"
  50 echo -e "3 .. Get packages with yum for Fedora"
  51 echo -e "4 .. Get packages with pacman for Arch"
  52 echo -e "5 .. Get packages with zypper for openSuse"
  53 echo -e "6 .. As 5) but with additional packages for building 32-bit AROS"
  54 echo -e "     on 64-bit Linux"
  55 echo -e "9 .. Skip this step"
  56 echo -e "0 .. Exit"
  57
  58 echo -e "\nEnter number and press <Enter>:"
  59
  60 read input
  61 case "$input" in
  62     1 ) echo -e "\nInstalling prerequisites with apt-get..."
  63         install_pkg "apt-get install" subversion
  64         install_pkg "apt-get install" git-core
  65         install_pkg "apt-get install" gcc
  66         install_pkg "apt-get install" g++
  67         install_pkg "apt-get install" make
  68         install_pkg "apt-get install" gawk
  69         install_pkg "apt-get install" bison
  70         install_pkg "apt-get install" flex
  71         install_pkg "apt-get install" bzip2
  72         install_pkg "apt-get install" netpbm
  73         install_pkg "apt-get install" autoconf
  74         install_pkg "apt-get install" automake
  75         install_pkg "apt-get install" libx11-dev
  76         install_pkg "apt-get install" libxext-dev
  77         install_pkg "apt-get install" libc6-dev
  78         install_pkg "apt-get install" liblzo2-dev
  79         install_pkg "apt-get install" libxxf86vm-dev
  80         install_pkg "apt-get install" libpng12-dev
  81         install_pkg "apt-get install" gcc-multilib
  82         install_pkg "apt-get install" libsdl1.2-dev
  83         install_pkg "apt-get install" byacc
  84         ;;
  85
  86     2 ) echo -e "\nInstalling prerequisites with apt-get..."
  87         install_pkg "apt-get install" subversion
  88         install_pkg "apt-get install" git-core
  89         install_pkg "apt-get install" gcc
  90         install_pkg "apt-get install" g++
  91         install_pkg "apt-get install" make
  92         install_pkg "apt-get install" gawk
  93         install_pkg "apt-get install" bison
  94         install_pkg "apt-get install" flex
  95         install_pkg "apt-get install" bzip2
  96         install_pkg "apt-get install" netpbm
  97         install_pkg "apt-get install" autoconf
  98         install_pkg "apt-get install" automake
  99         install_pkg "apt-get install" libx11-dev
 100         install_pkg "apt-get install" libxext-dev
 101         install_pkg "apt-get install" libc6-dev
 102         install_pkg "apt-get install" liblzo2-dev
 103         install_pkg "apt-get install" libxxf86vm-dev
 104         install_pkg "apt-get install" libpng12-dev
 105         install_pkg "apt-get install" gcc-multilib
 106         install_pkg "apt-get install" libsdl1.2-dev
 107         install_pkg "apt-get install" byacc
 108
 109         install_pkg "apt-get install" libc6-dev-i386
 110         install_pkg "apt-get install" lib32gcc1
 111         install_pkg "apt-get install" ia32-libs
 112         ;;
 113
 114     3 ) echo -e "\nInstalling prerequisites with yum..."
 115         install_pkg "yum install" subversion
 116         install_pkg "yum install" git-core
 117         install_pkg "yum install" gcc
 118         install_pkg "yum install" gawk
 119         install_pkg "yum install" bison
 120         install_pkg "yum install" flex
 121         install_pkg "yum install" bzip2
 122         install_pkg "yum install" netpbm
 123         install_pkg "yum install" autoconf
 124         install_pkg "yum install" automake
 125         install_pkg "yum install" libX11-devel
 126         install_pkg "yum install" glibc-devel
 127         install_pkg "yum install" lzo-devel
 128         ;;
 129
 130     4 ) echo -e "\nInstalling prerequisites with pacman.."
 131         echo -e "\nUpdating the List of software"
 132         echo -e "\nEnter sudo password"
 133         sudo pacman -Sy
 134         install_pkg "pacman --needed --noconfirm -S" subversion
 135         install_pkg "pacman --needed --noconfirm -S" git-core
 136         install_pkg "pacman --needed --noconfirm -S" gcc
 137         install_pkg "pacman --needed --noconfirm -S" gawk
 138         install_pkg "pacman --needed --noconfirm -S" bison
 139         install_pkg "pacman --needed --noconfirm -S" flex
 140         install_pkg "pacman --needed --noconfirm -S" bzip2
 141         install_pkg "pacman --needed --noconfirm -S" netpbm
 142         install_pkg "pacman --needed --noconfirm -S" autoconf
 143         install_pkg "pacman --needed --noconfirm -S" automake
 144         #it appears as though the libx11-dev,libc6-dev,liblzo2-dev is not needed on arch
 145         ;;
 146
 147     5 ) echo -e "\nInstalling prerequisites with zypper..."
 148         # tools
 149         install_pkg "zypper --non-interactive install" subversion
 150         install_pkg "zypper --non-interactive install" git-core
 151         install_pkg "zypper --non-interactive install" gcc
 152         install_pkg "zypper --non-interactive install" gcc-c++
 153         install_pkg "zypper --non-interactive install" make
 154         install_pkg "zypper --non-interactive install" gawk
 155         install_pkg "zypper --non-interactive install" bison
 156         install_pkg "zypper --non-interactive install" flex
 157         install_pkg "zypper --non-interactive install" bzip2
 158         install_pkg "zypper --non-interactive install" netpbm
 159         install_pkg "zypper --non-interactive install" autoconf
 160         install_pkg "zypper --non-interactive install" automake
 161         install_pkg "zypper --non-interactive install" patch
 162         install_pkg "zypper --non-interactive install" cmake
 163         install_pkg "zypper --non-interactive install" gperf
 164         install_pkg "zypper --non-interactive install" perl-Switch
 165         install_pkg "zypper --non-interactive install" byacc
 166
 167         # libs
 168         install_pkg "zypper --non-interactive install" libXxf86vm1
 169
 170         #devel
 171         install_pkg "zypper --non-interactive install" libX11-devel
 172         install_pkg "zypper --non-interactive install" glibc-devel
 173         install_pkg "zypper --non-interactive install" libpng12-devel
 174         ;;
 175
 176     6 ) echo -e "\nInstalling prerequisites with zypper..."
 177         # tools
 178         install_pkg "zypper --non-interactive install" subversion
 179         install_pkg "zypper --non-interactive install" git-core
 180         install_pkg "zypper --non-interactive install" gcc
 181         install_pkg "zypper --non-interactive install" gcc-c++
 182         install_pkg "zypper --non-interactive install" make
 183         install_pkg "zypper --non-interactive install" gawk
 184         install_pkg "zypper --non-interactive install" bison
 185         install_pkg "zypper --non-interactive install" flex
 186         install_pkg "zypper --non-interactive install" bzip2
 187         install_pkg "zypper --non-interactive install" netpbm
 188         install_pkg "zypper --non-interactive install" autoconf
 189         install_pkg "zypper --non-interactive install" automake
 190         install_pkg "zypper --non-interactive install" patch
 191         install_pkg "zypper --non-interactive install" cmake
 192         install_pkg "zypper --non-interactive install" gperf
 193         install_pkg "zypper --non-interactive install" perl-Switch
 194         install_pkg "zypper --non-interactive install" byacc
 195
 196         # libs
 197         install_pkg "zypper --non-interactive install" libXxf86vm1
 198
 199         #devel
 200         install_pkg "zypper --non-interactive install" libX11-devel
 201         install_pkg "zypper --non-interactive install" glibc-devel
 202         install_pkg "zypper --non-interactive install" libpng12-devel
 203
 204         # 32-bit support
 205         install_pkg "zypper --non-interactive install" gcc-32bit
 206         install_pkg "zypper --non-interactive install" gcc-c++-32bit
 207         install_pkg "zypper --non-interactive install" glibc-devel-32bit
 208         install_pkg "zypper --non-interactive install" libXxf86vm1-32bit
 209         ;;
 210
 211     0 ) exit 0
 212         ;;
 213 esac
 214
 215 cd "$curdir"
 216
 217 input=""
 218 until [ "$input" = "9" ]
 219 do
 220         echo -e "\n\n\n\n\n"
 221     echo -e "***********************************************"
 222     echo -e "* Step 2: get the sources from the repository *"
 223     echo -e "***********************************************"
 224     echo -e "\nYou can either use Subversion or Git. Git doesn't require"
 225     echo -e   "a password, but you'll get only read-only access."
 226     echo -e   "The repositories will be checked out into the current directory."
 227     echo -e "\nABI V1 with | ABI V1   |"
 228     echo -e   "Subversion  | with GIT |       Content"
 229     echo -e   "------------+----------+--------------------------"
 230     echo -e   "     1      |    21    | Get AROS core (required)"
 231     echo -e   "     2      |    22    | Get contrib (optional)"
 232     echo -e "\n     3      |    23    | Get ports source (optional, needs contrib)"
 233     echo -e "\n     4      |    ---   | Get documentation source (optional)"
 234     echo -e   "     5      |    ---   | Get binaries (wallpapers, logos etc.) (optional)"
 235     echo -e "\n9 .. Go to next step"
 236     echo -e   "0 .. Exit"
 237
 238     echo -e "\nEnter number and press <Enter>:"
 239
 240     read input
 241     case "$input" in
 242         1 ) echo -e "\nGetting AROS V1 core with Subversion...\n"
 243             svn checkout https://svn.aros.org/svn/aros/trunk/AROS "$srcdir"
 244             ;;
 245         2 ) echo -e "\nGetting contrib V1 with Subversion...\n"
 246             svn checkout https://svn.aros.org/svn/aros/trunk/contrib "$srcdir/contrib"
 247             ;;
 248         3 ) echo -e "\nGetting ports V1 with Subversion...\n"
 249             svn checkout https://svn.aros.org/svn/aros/trunk/ports "$srcdir/ports"
 250             ;;
 251         4 ) echo -e "\nGetting documentation V1 with Subversion...\n"
 252             svn checkout https://svn.aros.org/svn/aros/trunk/documentation "$srcdir/documentation"
 253             ;;
 254         5 ) echo -e "\nGetting binaries V1 with Subversion...\n"
 255             svn checkout https://svn.aros.org/svn/aros/trunk/binaries "$srcdir/binaries"
 256             ;;
 257
 258         21 ) echo -e "\nGetting AROS V1 core with Git...\n"
 259             git clone git://repo.or.cz/AROS.git "$srcdir"
 260             ;;
 261         22 ) echo -e "\nGetting contrib V1 with Git...\n"
 262             git clone git://repo.or.cz/AROS-Contrib.git "$srcdir/contrib"
 263             ;;
 264         23 ) echo -e "\nGetting ports V1 with Git...\n"
 265             git clone git://repo.or.cz/AROS-Ports.git "$srcdir/ports"
 266             ;;
 267
 268         0 ) exit 0
 269             ;;
 270     esac
 271 done
 272
 273 cd "$curdir"
 274
 275 input=""
 276 until [ "$input" = "9" ]
 277 do
 278     cd "$curdir"
 279
 280         echo -e "\n\n\n\n\n"
 281     echo -e "*******************************"
 282     echo -e "* Step 3: configure toolchain *"
 283     echo -e "*******************************"
 284     echo -e "\n  1    | i386   (32-bit)"
 285     echo -e   "  2    | x86_64 (64-bit)"
 286     echo -e   "  3    | m68k   (32-bit)"
 287     echo -e   "  4    | armhf  (32-bit)"
 288     echo -e "\n9 .. Go to next step"
 289     echo -e   "0 .. Exit"
 290
 291     echo -e "\nEnter number and press <Enter>:"
 292
 293     read input
 294     case "$input" in
 295         1 ) echo -e "\nConfiguring i386 Toolchain...\n"
 296             mkdir -p "$portsdir"
 297             mkdir -p aros-i386-toolchain-builddir
 298             cd aros-i386-toolchain-builddir
 299             "../$srcdir/configure" --target=linux-i386 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir"
 300             ;;
 301         2 ) echo -e "\nConfiguring x86_64 Toolchain...\n"
 302             mkdir -p "$portsdir"
 303             mkdir -p aros-x86_64-toolchain-builddir
 304             cd aros-x86_64-toolchain-builddir
 305             "../$srcdir/configure" --target=linux-x86_64 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir"
 306             ;;
 307         3 ) echo -e "\nConfiguring m68k Toolchain...\n"
 308             mkdir -p "$portsdir"
 309             mkdir -p aros-m68k-toolchain-builddir
 310             cd aros-m68k-toolchain-builddir
 311             "../$srcdir/configure" --target=amiga-m68k --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir"
 312             ;;
 313         4 ) echo -e "\nConfiguring armhf Toolchain...\n"
 314             mkdir -p "$portsdir"
 315             mkdir -p aros-armhf-toolchain-builddir
 316             cd aros-armhf-toolchain-builddir
 317             "../$srcdir/configure" --target=raspi-armhf --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir"
 318             ;;
 319
 320         0 ) exit 0
 321             ;;
 322     esac
 323 done
 324
 325
 326 cd "$curdir"
 327
 328 input=""
 329 until [ "$input" = "9" ]
 330 do
 331     cd "$curdir"
 332
 333         echo -e "\n\n\n\n\n"
 334     echo -e "***************************"
 335     echo -e "* Step 4: build toolchain *"
 336     echo -e "***************************"
 337     echo -e "\nYou can only build what you've already configured."
 338     echo -e "\n   1   | i386   (32-bit)"
 339     echo -e   "   2   | x86_64 (64-bit)"
 340     echo -e   "   3   | m68k   (32-bit)"
 341     echo -e   "   4   | armhf  (32-bit)"
 342     echo -e "\n9 .. Go to next step"
 343     echo -e   "0 .. Exit"
 344     echo -e "\nEnter number and press <Enter>:"
 345
 346     read input
 347     case "$input" in
 348         1 ) echo -e "\nBuilding i386 Toolchain...\n"
 349             cd aros-i386-toolchain-builddir
 350             make $makeopts crosstools
 351             cd "$curdir"
 352             rm -rf aros-i386-toolchain-builddir
 353             ;;
 354         2 ) echo -e "\nBuilding x86_64 Toolchain...\n"
 355             cd aros-x86_64-toolchain-builddir
 356             make $makeopts crosstools
 357             cd "$curdir"
 358             rm -rf aros-x86_64-toolchain-builddir
 359             ;;
 360         3 ) echo -e "\nBuilding m68k Toolchain...\n"
 361             cd aros-m68k-toolchain-builddir
 362             make $makeopts crosstools
 363             cd "$curdir"
 364             rm -rf aros-m68k-toolchain-builddir
 365             ;;
 366         4 ) echo -e "\nBuilding armhf Toolchain...\n"
 367             cd aros-armhf-toolchain-builddir
 368             make $makeopts crosstools
 369             cd "$curdir"
 370             rm -rf aros-armhf-toolchain-builddir
 371             ;;
 372
 373         0 ) exit 0
 374             ;;
 375     esac
 376 done
 377
 378
 379 cd "$curdir"
 380
 381 input=""
 382 until [ "$input" = "9" ]
 383 do
 384     cd "$curdir"
 385
 386         echo -e "\n\n\n\n\n"
 387     echo -e "**************************"
 388     echo -e "* Step 5: configure AROS *"
 389     echo -e "**************************"
 390     echo -e "\n  1    | linux-i386   (32-bit) debug"
 391     echo -e   "  2    | linux-i386   (32-bit)"
 392     echo -e   "  3    | linux-x86_64 (64-bit) debug"
 393     echo -e   "  4    | linux-x86_64 (64-bit)"
 394     echo -e   "  5    | pc-i386      (32-bit)"
 395     echo -e   "  6    | pc-x86_64    (64-bit)"
 396     echo -e   "  7    | amiga-m68k   (32-bit)"
 397     echo -e   "  8    | raspi-armhf  (32-bit)"
 398     echo -e "\n9 .. Go to next step"
 399     echo -e   "0 .. Exit"
 400
 401     echo -e "\nEnter number and press <Enter>:"
 402
 403     read input
 404     case "$input" in
 405         1 ) echo -e "\nConfiguring linux-i386 V1 with full debug...\n"
 406             mkdir -p "$portsdir"
 407             mkdir -p aros-linux-i386-dbg
 408             cd aros-linux-i386-dbg
 409             "../$srcdir/configure" --target=linux-i386 --enable-debug=all --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 410             ;;
 411         2 ) echo -e "\nConfiguring linux-i386 V1 without debug...\n"
 412             mkdir -p "$portsdir"
 413             mkdir -p aros-linux-i386
 414             cd aros-linux-i386
 415             "../$srcdir/configure" --target=linux-i386 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 416             ;;
 417         3 ) echo -e "\nConfiguring linux-x86_64 V1 with full debug...\n"
 418             mkdir -p "$portsdir"
 419             mkdir -p aros-linux-x86_64-dbg
 420             cd aros-linux-x86_64-dbg
 421             "../$srcdir/configure" --target=linux-x86_64 --enable-debug=all --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 422             ;;
 423         4 ) echo -e "\nConfiguring linux-x86_64 V1 without debug...\n"
 424             mkdir -p "$portsdir"
 425             mkdir -p aros-linux-x86_64
 426             cd aros-linux-x86_64
 427             "../$srcdir/configure" --target=linux-x86_64 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 428             ;;
 429         5 ) echo -e "\nConfiguring pc-i386 V1...\n"
 430             mkdir -p "$portsdir"
 431             mkdir -p aros-pc-i386
 432             cd aros-pc-i386
 433             "../$srcdir/configure" --target=pc-i386 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 434             ;;
 435         6 ) echo -e "\nConfiguring pc-x86_64 V1...\n"
 436             mkdir -p "$portsdir"
 437             mkdir -p aros-pc-x86_64
 438             cd aros-pc-x86_64
 439             "../$srcdir/configure" --target=pc-x86_64 --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 440             ;;
 441         7 ) echo -e "\nConfiguring amiga-m68k V1...\n"
 442             mkdir -p "$portsdir"
 443             mkdir -p aros-amiga-m68k
 444             cd aros-amiga-m68k
 445             "../$srcdir/configure" --target=amiga-m68k --with-serial-debug=yes --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 446             ;;
 447         8 ) echo -e "\nConfiguring raspi-armhf V1...\n"
 448             mkdir -p "$portsdir"
 449             mkdir -p aros-raspi-armhf
 450             cd aros-raspi-armhf
 451             "../$srcdir/configure" --target=raspi-armhf --with-portssources="$portsdir" --with-aros-toolchain-install="$tooldir" --with-aros-toolchain=yes
 452             ;;
 453
 454         0 ) exit 0
 455             ;;
 456     esac
 457 done
 458
 459
 460 cd "$curdir"
 461
 462 input=""
 463 until [ "$input" = "9" ]
 464 do
 465     cd "$curdir"
 466
 467         echo -e "\n\n\n\n\n"
 468     echo -e "*****************"
 469     echo -e "* Step 6: build *"
 470     echo -e "*****************"
 471     echo -e "\nYou can only build what you've already configured."
 472     echo -e "\n   1   | linux-i386   (32-bit) debug"
 473     echo -e   "   2   | linux-i386   (32-bit)"
 474     echo -e   "   3   | linux-x86_64 (64-bit) debug"
 475     echo -e   "   4   | linux-x86_64 (64-bit)"
 476     echo -e   "   5   | pc-i386      (32-bit)"
 477     echo -e   "   6   | pc-x86_64    (64-bit)"
 478     echo -e   "   7   | amiga-m68k   (32-bit)"
 479     echo -e   "   8   | raspi-armhf  (32-bit)"
 480     echo -e "\n9 .. Go to next step"
 481     echo -e   "0 .. Exit"
 482     echo -e "\nEnter number and press <Enter>:"
 483
 484     read input
 485     case "$input" in
 486         1 ) echo -e "\nBuilding linux-i386 V1 with full debug...\n"
 487             cd aros-linux-i386-dbg
 488             make $makeopts
 489             make $makeopts contrib
 490             make $makeopts ports
 491             echo -e "\nIf everything went well AROS will be available"
 492             echo -e "in the directory aros-linux-i386-dbg/bin/<target>/AROS"
 493             ;;
 494         2 ) echo -e "\nBuilding linux-i386 V1 without debug...\n"
 495             cd aros-linux-i386
 496             make $makeopts
 497             make $makeopts contrib
 498             make $makeopts ports
 499             echo -e "\nIf everything went well AROS will be available"
 500             echo -e "in the directory aros-linux-i386/bin/<target>/AROS"
 501             ;;
 502         3 ) echo -e "\nBuilding linux-x86_64 V1 with full debug...\n"
 503             cd aros-linux-x86_64-dbg
 504             make $makeopts
 505             make $makeopts contrib
 506             make $makeopts ports
 507             echo -e "\nIf everything went well AROS will be available"
 508             echo -e "in the directory aros-linux-x86_64-dbg/bin/<target>/AROS"
 509             ;;
 510         4 ) echo -e "\nBuilding linux-x86_64 V1 without debug...\n"
 511             cd aros-linux-x86_64
 512             make $makeopts
 513             make $makeopts contrib
 514             make $makeopts ports
 515             echo -e "\nIf everything went well AROS will be available"
 516             echo -e "in the directory aros-linux-x86_64/bin/<target>/AROS"
 517             ;;
 518         5 ) echo -e "\nBuilding pc-i386 V1...\n"
 519             cd aros-pc-i386
 520             make $makeopts
 521             make $makeopts contrib
 522             make $makeopts ports
 523             make $makeopts distfiles
 524             echo -e "\nIf everything went well AROS will be available"
 525             echo -e "in the directory aros-pc-i386/bin/<target>/AROS"
 526             ;;
 527         6 ) echo -e "\nBuilding pc-x86_64 V1...\n"
 528             cd aros-pc-x86_64
 529             make $makeopts
 530             make $makeopts contrib
 531             make $makeopts ports
 532             make $makeopts distfiles
 533             echo -e "\nIf everything went well AROS will be available"
 534             echo -e "in the directory aros-pc-x86_64/bin/<target>/AROS"
 535             ;;
 536         7 ) echo -e "\nBuilding amiga-m68k V1...\n"
 537             cd aros-amiga-m68k
 538             make $makeopts
 539             make $makeopts contrib
 540             make $makeopts ports
 541             make $makeopts distfiles
 542             echo -e "\nIf everything went well AROS will be available"
 543             echo -e "in the directory aros-amiga-m68k/distfiles"
 544             ;;
 545         8 ) echo -e "\nBuilding raspi-armhf V1...\n"
 546             cd aros-raspi-armhf
 547             make $makeopts
 548             make $makeopts contrib
 549             make $makeopts ports
 550             make $makeopts distfiles
 551             echo -e "\nIf everything went well AROS will be available"
 552             echo -e "in the directory aros-raspi-armhf/distfiles"
 553             ;;
 554
 555         0 ) exit 0
 556             ;;
 557     esac
 558 done
 559
 560 cd "$curdir"
 561
 562 exit 0