arch/all-pc/acpica/source/include/acoutput.h

   1 /******************************************************************************
   2  *
   3  * Name: acoutput.h -- debug output
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACOUTPUT_H__
  45 #define __ACOUTPUT_H__
  46
  47 /*
  48  * Debug levels and component IDs. These are used to control the
  49  * granularity of the output of the ACPI_DEBUG_PRINT macro -- on a
  50  * per-component basis and a per-exception-type basis.
  51  */
  52
  53 /* Component IDs are used in the global "DebugLayer" */
  54
  55 #define ACPI_UTILITIES              0x00000001
  56 #define ACPI_HARDWARE               0x00000002
  57 #define ACPI_EVENTS                 0x00000004
  58 #define ACPI_TABLES                 0x00000008
  59 #define ACPI_NAMESPACE              0x00000010
  60 #define ACPI_PARSER                 0x00000020
  61 #define ACPI_DISPATCHER             0x00000040
  62 #define ACPI_EXECUTER               0x00000080
  63 #define ACPI_RESOURCES              0x00000100
  64 #define ACPI_CA_DEBUGGER            0x00000200
  65 #define ACPI_OS_SERVICES            0x00000400
  66 #define ACPI_CA_DISASSEMBLER        0x00000800
  67
  68 /* Component IDs for ACPI tools and utilities */
  69
  70 #define ACPI_COMPILER               0x00001000
  71 #define ACPI_TOOLS                  0x00002000
  72 #define ACPI_EXAMPLE                0x00004000
  73 #define ACPI_DRIVER                 0x00008000
  74 #define DT_COMPILER                 0x00010000
  75 #define ASL_PREPROCESSOR            0x00020000
  76
  77 #define ACPI_ALL_COMPONENTS         0x0001FFFF
  78 #define ACPI_COMPONENT_DEFAULT      (ACPI_ALL_COMPONENTS)
  79
  80 /* Component IDs reserved for ACPI drivers */
  81
  82 #define ACPI_ALL_DRIVERS            0xFFFF0000
  83
  84
  85 /*
  86  * Raw debug output levels, do not use these in the ACPI_DEBUG_PRINT macros
  87  */
  88 #define ACPI_LV_INIT                0x00000001
  89 #define ACPI_LV_DEBUG_OBJECT        0x00000002
  90 #define ACPI_LV_INFO                0x00000004
  91 #define ACPI_LV_REPAIR              0x00000008
  92 #define ACPI_LV_ALL_EXCEPTIONS      0x0000000F
  93
  94 /* Trace verbosity level 1 [Standard Trace Level] */
  95
  96 #define ACPI_LV_INIT_NAMES          0x00000020
  97 #define ACPI_LV_PARSE               0x00000040
  98 #define ACPI_LV_LOAD                0x00000080
  99 #define ACPI_LV_DISPATCH            0x00000100
 100 #define ACPI_LV_EXEC                0x00000200
 101 #define ACPI_LV_NAMES               0x00000400
 102 #define ACPI_LV_OPREGION            0x00000800
 103 #define ACPI_LV_BFIELD              0x00001000
 104 #define ACPI_LV_TABLES              0x00002000
 105 #define ACPI_LV_VALUES              0x00004000
 106 #define ACPI_LV_OBJECTS             0x00008000
 107 #define ACPI_LV_RESOURCES           0x00010000
 108 #define ACPI_LV_USER_REQUESTS       0x00020000
 109 #define ACPI_LV_PACKAGE             0x00040000
 110 #define ACPI_LV_VERBOSITY1          0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS
 111
 112 /* Trace verbosity level 2 [Function tracing and memory allocation] */
 113
 114 #define ACPI_LV_ALLOCATIONS         0x00100000
 115 #define ACPI_LV_FUNCTIONS           0x00200000
 116 #define ACPI_LV_OPTIMIZATIONS       0x00400000
 117 #define ACPI_LV_VERBOSITY2          0x00700000 | ACPI_LV_VERBOSITY1
 118 #define ACPI_LV_ALL                 ACPI_LV_VERBOSITY2
 119
 120 /* Trace verbosity level 3 [Threading, I/O, and Interrupts] */
 121
 122 #define ACPI_LV_MUTEX               0x01000000
 123 #define ACPI_LV_THREADS             0x02000000
 124 #define ACPI_LV_IO                  0x04000000
 125 #define ACPI_LV_INTERRUPTS          0x08000000
 126 #define ACPI_LV_VERBOSITY3          0x0F000000 | ACPI_LV_VERBOSITY2
 127
 128 /* Exceptionally verbose output -- also used in the global "DebugLevel"  */
 129
 130 #define ACPI_LV_AML_DISASSEMBLE     0x10000000
 131 #define ACPI_LV_VERBOSE_INFO        0x20000000
 132 #define ACPI_LV_FULL_TABLES         0x40000000
 133 #define ACPI_LV_EVENTS              0x80000000
 134 #define ACPI_LV_VERBOSE             0xF0000000
 135
 136
 137 /*
 138  * Debug level macros that are used in the DEBUG_PRINT macros
 139  */
 140 #define ACPI_DEBUG_LEVEL(dl)        (UINT32) dl,ACPI_DEBUG_PARAMETERS
 141
 142 /*
 143  * Exception level -- used in the global "DebugLevel"
 144  *
 145  * Note: For errors, use the ACPI_ERROR or ACPI_EXCEPTION interfaces.
 146  * For warnings, use ACPI_WARNING.
 147  */
 148 #define ACPI_DB_INIT                ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
 149 #define ACPI_DB_DEBUG_OBJECT        ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
 150 #define ACPI_DB_INFO                ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
 151 #define ACPI_DB_REPAIR              ACPI_DEBUG_LEVEL (ACPI_LV_REPAIR)
 152 #define ACPI_DB_ALL_EXCEPTIONS      ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
 153
 154 /* Trace level -- also used in the global "DebugLevel" */
 155
 156 #define ACPI_DB_INIT_NAMES          ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
 157 #define ACPI_DB_THREADS             ACPI_DEBUG_LEVEL (ACPI_LV_THREADS)
 158 #define ACPI_DB_PARSE               ACPI_DEBUG_LEVEL (ACPI_LV_PARSE)
 159 #define ACPI_DB_DISPATCH            ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH)
 160 #define ACPI_DB_LOAD                ACPI_DEBUG_LEVEL (ACPI_LV_LOAD)
 161 #define ACPI_DB_EXEC                ACPI_DEBUG_LEVEL (ACPI_LV_EXEC)
 162 #define ACPI_DB_NAMES               ACPI_DEBUG_LEVEL (ACPI_LV_NAMES)
 163 #define ACPI_DB_OPREGION            ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION)
 164 #define ACPI_DB_BFIELD              ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD)
 165 #define ACPI_DB_TABLES              ACPI_DEBUG_LEVEL (ACPI_LV_TABLES)
 166 #define ACPI_DB_FUNCTIONS           ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS)
 167 #define ACPI_DB_OPTIMIZATIONS       ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS)
 168 #define ACPI_DB_VALUES              ACPI_DEBUG_LEVEL (ACPI_LV_VALUES)
 169 #define ACPI_DB_OBJECTS             ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS)
 170 #define ACPI_DB_ALLOCATIONS         ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS)
 171 #define ACPI_DB_RESOURCES           ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES)
 172 #define ACPI_DB_IO                  ACPI_DEBUG_LEVEL (ACPI_LV_IO)
 173 #define ACPI_DB_INTERRUPTS          ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS)
 174 #define ACPI_DB_USER_REQUESTS       ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
 175 #define ACPI_DB_PACKAGE             ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
 176 #define ACPI_DB_MUTEX               ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
 177 #define ACPI_DB_EVENTS              ACPI_DEBUG_LEVEL (ACPI_LV_EVENTS)
 178
 179 #define ACPI_DB_ALL                 ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
 180
 181 /* Defaults for DebugLevel, debug and normal */
 182
 183 #define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR)
 184 #define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR)
 185 #define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
 186
 187
 188 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
 189 /*
 190  * The module name is used primarily for error and debug messages.
 191  * The __FILE__ macro is not very useful for this, because it
 192  * usually includes the entire pathname to the module making the
 193  * debug output difficult to read.
 194  */
 195 #define ACPI_MODULE_NAME(Name)          static const char ACPI_UNUSED_VAR _AcpiModuleName[] = Name;
 196 #else
 197 /*
 198  * For the no-debug and no-error-msg cases, we must at least define
 199  * a null module name.
 200  */
 201 #define ACPI_MODULE_NAME(Name)
 202 #define _AcpiModuleName ""
 203 #endif
 204
 205 /*
 206  * Ascii error messages can be configured out
 207  */
 208 #ifndef ACPI_NO_ERROR_MESSAGES
 209 #define AE_INFO                         _AcpiModuleName, __LINE__
 210
 211 /*
 212  * Error reporting. Callers module and line number are inserted by AE_INFO,
 213  * the plist contains a set of parens to allow variable-length lists.
 214  * These macros are used for both the debug and non-debug versions of the code.
 215  */
 216 #define ACPI_INFO(plist)                AcpiInfo plist
 217 #define ACPI_WARNING(plist)             AcpiWarning plist
 218 #define ACPI_EXCEPTION(plist)           AcpiException plist
 219 #define ACPI_ERROR(plist)               AcpiError plist
 220 #define ACPI_BIOS_WARNING(plist)        AcpiBiosWarning plist
 221 #define ACPI_BIOS_ERROR(plist)          AcpiBiosError plist
 222 #define ACPI_DEBUG_OBJECT(obj,l,i)      AcpiExDoDebugObject(obj,l,i)
 223
 224 #else
 225
 226 /* No error messages */
 227
 228 #define ACPI_INFO(plist)
 229 #define ACPI_WARNING(plist)
 230 #define ACPI_EXCEPTION(plist)
 231 #define ACPI_ERROR(plist)
 232 #define ACPI_BIOS_WARNING(plist)
 233 #define ACPI_BIOS_ERROR(plist)
 234 #define ACPI_DEBUG_OBJECT(obj,l,i)
 235
 236 #endif /* ACPI_NO_ERROR_MESSAGES */
 237
 238
 239 /*
 240  * Debug macros that are conditionally compiled
 241  */
 242 #ifdef ACPI_DEBUG_OUTPUT
 243
 244 /*
 245  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
 246  * define it now. This is the case where there the compiler does not support
 247  * a __FUNCTION__ macro or equivalent.
 248  */
 249 #ifndef ACPI_GET_FUNCTION_NAME
 250 #define ACPI_GET_FUNCTION_NAME          _AcpiFunctionName
 251
 252 /*
 253  * The Name parameter should be the procedure name as a quoted string.
 254  * The function name is also used by the function exit macros below.
 255  * Note: (const char) is used to be compatible with the debug interfaces
 256  * and macros such as __FUNCTION__.
 257  */
 258 #define ACPI_FUNCTION_NAME(Name)        static const char _AcpiFunctionName[] = #Name;
 259
 260 #else
 261 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
 262
 263 #define ACPI_FUNCTION_NAME(Name)
 264 #endif /* ACPI_GET_FUNCTION_NAME */
 265
 266 /*
 267  * Common parameters used for debug output functions:
 268  * line number, function name, module(file) name, component ID
 269  */
 270 #define ACPI_DEBUG_PARAMETERS \
 271     __LINE__, ACPI_GET_FUNCTION_NAME, _AcpiModuleName, _COMPONENT
 272
 273 /* Check if debug output is currently dynamically enabled */
 274
 275 #define ACPI_IS_DEBUG_ENABLED(Level, Component) \
 276     ((Level & AcpiDbgLevel) && (Component & AcpiDbgLayer))
 277
 278 /*
 279  * Master debug print macros
 280  * Print message if and only if:
 281  *    1) Debug print for the current component is enabled
 282  *    2) Debug error level or trace level for the print statement is enabled
 283  *
 284  * November 2012: Moved the runtime check for whether to actually emit the
 285  * debug message outside of the print function itself. This improves overall
 286  * performance at a relatively small code cost. Implementation involves the
 287  * use of variadic macros supported by C99.
 288  *
 289  * Note: the ACPI_DO_WHILE0 macro is used to prevent some compilers from
 290  * complaining about these constructs. On other compilers the do...while
 291  * adds some extra code, so this feature is optional.
 292  */
 293 #ifdef ACPI_USE_DO_WHILE_0
 294 #define ACPI_DO_WHILE0(a)               do a while(0)
 295 #else
 296 #define ACPI_DO_WHILE0(a)               a
 297 #endif
 298
 299 /* DEBUG_PRINT functions */
 300
 301 #define ACPI_DEBUG_PRINT(plist)         ACPI_ACTUAL_DEBUG plist
 302 #define ACPI_DEBUG_PRINT_RAW(plist)     ACPI_ACTUAL_DEBUG_RAW plist
 303
 304 /* Helper macros for DEBUG_PRINT */
 305
 306 #define ACPI_DO_DEBUG_PRINT(Function, Level, Line, Filename, Modulename, Component, ...) \
 307     ACPI_DO_WHILE0 ({ \
 308         if (ACPI_IS_DEBUG_ENABLED (Level, Component)) \
 309         { \
 310             Function (Level, Line, Filename, Modulename, Component, __VA_ARGS__); \
 311         } \
 312     })
 313
 314 #define ACPI_ACTUAL_DEBUG(Level, Line, Filename, Modulename, Component, ...) \
 315     ACPI_DO_DEBUG_PRINT (AcpiDebugPrint, Level, Line, \
 316         Filename, Modulename, Component, __VA_ARGS__)
 317
 318 #define ACPI_ACTUAL_DEBUG_RAW(Level, Line, Filename, Modulename, Component, ...) \
 319     ACPI_DO_DEBUG_PRINT (AcpiDebugPrintRaw, Level, Line, \
 320         Filename, Modulename, Component, __VA_ARGS__)
 321
 322
 323 /*
 324  * Function entry tracing
 325  *
 326  * The name of the function is emitted as a local variable that is
 327  * intended to be used by both the entry trace and the exit trace.
 328  */
 329
 330 /* Helper macro */
 331
 332 #define ACPI_TRACE_ENTRY(Name, Function, Type, Param) \
 333     ACPI_FUNCTION_NAME (Name) \
 334     Function (ACPI_DEBUG_PARAMETERS, (Type) (Param))
 335
 336 /* The actual entry trace macros */
 337
 338 #define ACPI_FUNCTION_TRACE(Name) \
 339     ACPI_FUNCTION_NAME(Name) \
 340     AcpiUtTrace (ACPI_DEBUG_PARAMETERS)
 341
 342 #define ACPI_FUNCTION_TRACE_PTR(Name, Pointer) \
 343     ACPI_TRACE_ENTRY (Name, AcpiUtTracePtr, void *, Pointer)
 344
 345 #define ACPI_FUNCTION_TRACE_U32(Name, Value) \
 346     ACPI_TRACE_ENTRY (Name, AcpiUtTraceU32, UINT32, Value)
 347
 348 #define ACPI_FUNCTION_TRACE_STR(Name, String) \
 349     ACPI_TRACE_ENTRY (Name, AcpiUtTraceStr, char *, String)
 350
 351 #define ACPI_FUNCTION_ENTRY() \
 352     AcpiUtTrackStackPtr()
 353
 354
 355 /*
 356  * Function exit tracing
 357  *
 358  * These macros include a return statement. This is usually considered
 359  * bad form, but having a separate exit macro before the actual return
 360  * is very ugly and difficult to maintain.
 361  *
 362  * One of the FUNCTION_TRACE macros above must be used in conjunction
 363  * with these macros so that "_AcpiFunctionName" is defined.
 364  *
 365  * There are two versions of most of the return macros. The default version is
 366  * safer, since it avoids side-effects by guaranteeing that the argument will
 367  * not be evaluated twice.
 368  *
 369  * A less-safe version of the macros is provided for optional use if the
 370  * compiler uses excessive CPU stack (for example, this may happen in the
 371  * debug case if code optimzation is disabled.)
 372  */
 373
 374 /* Exit trace helper macro */
 375
 376 #ifndef ACPI_SIMPLE_RETURN_MACROS
 377
 378 #define ACPI_TRACE_EXIT(Function, Type, Param) \
 379     ACPI_DO_WHILE0 ({ \
 380         register Type _Param = (Type) (Param); \
 381         Function (ACPI_DEBUG_PARAMETERS, _Param); \
 382         return (_Param); \
 383     })
 384
 385 #else /* Use original less-safe macros */
 386
 387 #define ACPI_TRACE_EXIT(Function, Type, Param) \
 388     ACPI_DO_WHILE0 ({ \
 389         Function (ACPI_DEBUG_PARAMETERS, (Type) (Param)); \
 390         return (Param); \
 391     })
 392
 393 #endif /* ACPI_SIMPLE_RETURN_MACROS */
 394
 395 /* The actual exit macros */
 396
 397 #define return_VOID \
 398     ACPI_DO_WHILE0 ({ \
 399         AcpiUtExit (ACPI_DEBUG_PARAMETERS); \
 400         return; \
 401     })
 402
 403 #define return_ACPI_STATUS(Status) \
 404     ACPI_TRACE_EXIT (AcpiUtStatusExit, ACPI_STATUS, Status)
 405
 406 #define return_PTR(Pointer) \
 407     ACPI_TRACE_EXIT (AcpiUtPtrExit, void *, Pointer)
 408
 409 #define return_VALUE(Value) \
 410     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT64, Value)
 411
 412 #define return_UINT32(Value) \
 413     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT32, Value)
 414
 415 #define return_UINT8(Value) \
 416     ACPI_TRACE_EXIT (AcpiUtValueExit, UINT8, Value)
 417
 418 /* Conditional execution */
 419
 420 #define ACPI_DEBUG_EXEC(a)              a
 421 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
 422 #define _VERBOSE_STRUCTURES
 423
 424
 425 /* Various object display routines for debug */
 426
 427 #define ACPI_DUMP_STACK_ENTRY(a)        AcpiExDumpOperand((a), 0)
 428 #define ACPI_DUMP_OPERANDS(a, b ,c)     AcpiExDumpOperands(a, b, c)
 429 #define ACPI_DUMP_ENTRY(a, b)           AcpiNsDumpEntry (a, b)
 430 #define ACPI_DUMP_PATHNAME(a, b, c, d)  AcpiNsDumpPathname(a, b, c, d)
 431 #define ACPI_DUMP_BUFFER(a, b)          AcpiUtDebugDumpBuffer((UINT8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
 432
 433 #else /* ACPI_DEBUG_OUTPUT */
 434 /*
 435  * This is the non-debug case -- make everything go away,
 436  * leaving no executable debug code!
 437  */
 438 #define ACPI_DEBUG_PRINT(pl)
 439 #define ACPI_DEBUG_PRINT_RAW(pl)
 440 #define ACPI_DEBUG_EXEC(a)
 441 #define ACPI_DEBUG_ONLY_MEMBERS(a)
 442 #define ACPI_FUNCTION_NAME(a)
 443 #define ACPI_FUNCTION_TRACE(a)
 444 #define ACPI_FUNCTION_TRACE_PTR(a, b)
 445 #define ACPI_FUNCTION_TRACE_U32(a, b)
 446 #define ACPI_FUNCTION_TRACE_STR(a, b)
 447 #define ACPI_FUNCTION_ENTRY()
 448 #define ACPI_DUMP_STACK_ENTRY(a)
 449 #define ACPI_DUMP_OPERANDS(a, b, c)
 450 #define ACPI_DUMP_ENTRY(a, b)
 451 #define ACPI_DUMP_PATHNAME(a, b, c, d)
 452 #define ACPI_DUMP_BUFFER(a, b)
 453 #define ACPI_IS_DEBUG_ENABLED(Level, Component) 0
 454
 455 /* Return macros must have a return statement at the minimum */
 456
 457 #define return_VOID                     return
 458 #define return_ACPI_STATUS(s)           return(s)
 459 #define return_PTR(s)                   return(s)
 460 #define return_VALUE(s)                 return(s)
 461 #define return_UINT8(s)                 return(s)
 462 #define return_UINT32(s)                return(s)
 463
 464 #endif /* ACPI_DEBUG_OUTPUT */
 465
 466
 467 #endif /* __ACOUTPUT_H__ */