1 /******************************************************************************
3 * Name: actbl.h - Basic ACPI Table Definitions
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2013, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
48 /*******************************************************************************
50 * Fundamental ACPI tables
52 * This file contains definitions for the ACPI tables that are directly consumed
53 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
54 * device drivers and other OS support code.
56 * The RSDP and FACS do not use the common ACPI table header. All other ACPI
57 * tables use the header.
59 ******************************************************************************/
63 * Values for description table header signatures for tables defined in this
64 * file. Useful because they make it more difficult to inadvertently type in
65 * the wrong signature.
67 #define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
68 #define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
69 #define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
70 #define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
71 #define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
72 #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
73 #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
74 #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
75 #define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
79 * All tables and structures must be byte-packed to match the ACPI
80 * specification, since the tables are provided by the system BIOS
85 * Note: C bitfields are not used for this reason:
87 * "Bitfields are great and easy to read, but unfortunately the C language
88 * does not specify the layout of bitfields in memory, which means they are
89 * essentially useless for dealing with packed data in on-disk formats or
90 * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
91 * this decision was a design error in C. Ritchie could have picked an order
92 * and stuck with it." Norman Ramsey.
93 * See http://stackoverflow.com/a/1053662/41661
97 /*******************************************************************************
99 * Master ACPI Table Header. This common header is used by all ACPI tables
100 * except the RSDP and FACS.
102 ******************************************************************************/
104 typedef struct acpi_table_header
106 char Signature
[ACPI_NAME_SIZE
]; /* ASCII table signature */
107 UINT32 Length
; /* Length of table in bytes, including this header */
108 UINT8 Revision
; /* ACPI Specification minor version number */
109 UINT8 Checksum
; /* To make sum of entire table == 0 */
110 char OemId
[ACPI_OEM_ID_SIZE
]; /* ASCII OEM identification */
111 char OemTableId
[ACPI_OEM_TABLE_ID_SIZE
]; /* ASCII OEM table identification */
112 UINT32 OemRevision
; /* OEM revision number */
113 char AslCompilerId
[ACPI_NAME_SIZE
]; /* ASCII ASL compiler vendor ID */
114 UINT32 AslCompilerRevision
; /* ASL compiler version */
119 /*******************************************************************************
121 * GAS - Generic Address Structure (ACPI 2.0+)
123 * Note: Since this structure is used in the ACPI tables, it is byte aligned.
124 * If misaligned access is not supported by the hardware, accesses to the
125 * 64-bit Address field must be performed with care.
127 ******************************************************************************/
129 typedef struct acpi_generic_address
131 UINT8 SpaceId
; /* Address space where struct or register exists */
132 UINT8 BitWidth
; /* Size in bits of given register */
133 UINT8 BitOffset
; /* Bit offset within the register */
134 UINT8 AccessWidth
; /* Minimum Access size (ACPI 3.0) */
135 UINT64 Address
; /* 64-bit address of struct or register */
137 } ACPI_GENERIC_ADDRESS
;
140 /*******************************************************************************
142 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
145 ******************************************************************************/
147 typedef struct acpi_table_rsdp
149 char Signature
[8]; /* ACPI signature, contains "RSD PTR " */
150 UINT8 Checksum
; /* ACPI 1.0 checksum */
151 char OemId
[ACPI_OEM_ID_SIZE
]; /* OEM identification */
152 UINT8 Revision
; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
153 UINT32 RsdtPhysicalAddress
; /* 32-bit physical address of the RSDT */
154 UINT32 Length
; /* Table length in bytes, including header (ACPI 2.0+) */
155 UINT64 XsdtPhysicalAddress
; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
156 UINT8 ExtendedChecksum
; /* Checksum of entire table (ACPI 2.0+) */
157 UINT8 Reserved
[3]; /* Reserved, must be zero */
161 /* Standalone struct for the ACPI 1.0 RSDP */
163 typedef struct acpi_rsdp_common
167 char OemId
[ACPI_OEM_ID_SIZE
];
169 UINT32 RsdtPhysicalAddress
;
173 /* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
175 typedef struct acpi_rsdp_extension
178 UINT64 XsdtPhysicalAddress
;
179 UINT8 ExtendedChecksum
;
182 } ACPI_RSDP_EXTENSION
;
185 /*******************************************************************************
187 * RSDT/XSDT - Root System Description Tables
190 ******************************************************************************/
192 typedef struct acpi_table_rsdt
194 ACPI_TABLE_HEADER Header
; /* Common ACPI table header */
195 UINT32 TableOffsetEntry
[1]; /* Array of pointers to ACPI tables */
199 typedef struct acpi_table_xsdt
201 ACPI_TABLE_HEADER Header
; /* Common ACPI table header */
202 UINT64 TableOffsetEntry
[1]; /* Array of pointers to ACPI tables */
207 /*******************************************************************************
209 * FACS - Firmware ACPI Control Structure (FACS)
211 ******************************************************************************/
213 typedef struct acpi_table_facs
215 char Signature
[4]; /* ASCII table signature */
216 UINT32 Length
; /* Length of structure, in bytes */
217 UINT32 HardwareSignature
; /* Hardware configuration signature */
218 UINT32 FirmwareWakingVector
; /* 32-bit physical address of the Firmware Waking Vector */
219 UINT32 GlobalLock
; /* Global Lock for shared hardware resources */
221 UINT64 XFirmwareWakingVector
; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
222 UINT8 Version
; /* Version of this table (ACPI 2.0+) */
223 UINT8 Reserved
[3]; /* Reserved, must be zero */
224 UINT32 OspmFlags
; /* Flags to be set by OSPM (ACPI 4.0) */
225 UINT8 Reserved1
[24]; /* Reserved, must be zero */
229 /* Masks for GlobalLock flag field above */
231 #define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
232 #define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
234 /* Masks for Flags field above */
236 #define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
237 #define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
239 /* Masks for OspmFlags field above */
241 #define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
244 /*******************************************************************************
246 * FADT - Fixed ACPI Description Table (Signature "FACP")
249 ******************************************************************************/
251 /* Fields common to all versions of the FADT */
253 typedef struct acpi_table_fadt
255 ACPI_TABLE_HEADER Header
; /* Common ACPI table header */
256 UINT32 Facs
; /* 32-bit physical address of FACS */
257 UINT32 Dsdt
; /* 32-bit physical address of DSDT */
258 UINT8 Model
; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
259 UINT8 PreferredProfile
; /* Conveys preferred power management profile to OSPM. */
260 UINT16 SciInterrupt
; /* System vector of SCI interrupt */
261 UINT32 SmiCommand
; /* 32-bit Port address of SMI command port */
262 UINT8 AcpiEnable
; /* Value to write to SMI_CMD to enable ACPI */
263 UINT8 AcpiDisable
; /* Value to write to SMI_CMD to disable ACPI */
264 UINT8 S4BiosRequest
; /* Value to write to SMI_CMD to enter S4BIOS state */
265 UINT8 PstateControl
; /* Processor performance state control*/
266 UINT32 Pm1aEventBlock
; /* 32-bit port address of Power Mgt 1a Event Reg Blk */
267 UINT32 Pm1bEventBlock
; /* 32-bit port address of Power Mgt 1b Event Reg Blk */
268 UINT32 Pm1aControlBlock
; /* 32-bit port address of Power Mgt 1a Control Reg Blk */
269 UINT32 Pm1bControlBlock
; /* 32-bit port address of Power Mgt 1b Control Reg Blk */
270 UINT32 Pm2ControlBlock
; /* 32-bit port address of Power Mgt 2 Control Reg Blk */
271 UINT32 PmTimerBlock
; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
272 UINT32 Gpe0Block
; /* 32-bit port address of General Purpose Event 0 Reg Blk */
273 UINT32 Gpe1Block
; /* 32-bit port address of General Purpose Event 1 Reg Blk */
274 UINT8 Pm1EventLength
; /* Byte Length of ports at Pm1xEventBlock */
275 UINT8 Pm1ControlLength
; /* Byte Length of ports at Pm1xControlBlock */
276 UINT8 Pm2ControlLength
; /* Byte Length of ports at Pm2ControlBlock */
277 UINT8 PmTimerLength
; /* Byte Length of ports at PmTimerBlock */
278 UINT8 Gpe0BlockLength
; /* Byte Length of ports at Gpe0Block */
279 UINT8 Gpe1BlockLength
; /* Byte Length of ports at Gpe1Block */
280 UINT8 Gpe1Base
; /* Offset in GPE number space where GPE1 events start */
281 UINT8 CstControl
; /* Support for the _CST object and C-States change notification */
282 UINT16 C2Latency
; /* Worst case HW latency to enter/exit C2 state */
283 UINT16 C3Latency
; /* Worst case HW latency to enter/exit C3 state */
284 UINT16 FlushSize
; /* Processor memory cache line width, in bytes */
285 UINT16 FlushStride
; /* Number of flush strides that need to be read */
286 UINT8 DutyOffset
; /* Processor duty cycle index in processor P_CNT reg */
287 UINT8 DutyWidth
; /* Processor duty cycle value bit width in P_CNT register */
288 UINT8 DayAlarm
; /* Index to day-of-month alarm in RTC CMOS RAM */
289 UINT8 MonthAlarm
; /* Index to month-of-year alarm in RTC CMOS RAM */
290 UINT8 Century
; /* Index to century in RTC CMOS RAM */
291 UINT16 BootFlags
; /* IA-PC Boot Architecture Flags (see below for individual flags) */
292 UINT8 Reserved
; /* Reserved, must be zero */
293 UINT32 Flags
; /* Miscellaneous flag bits (see below for individual flags) */
294 ACPI_GENERIC_ADDRESS ResetRegister
; /* 64-bit address of the Reset register */
295 UINT8 ResetValue
; /* Value to write to the ResetRegister port to reset the system */
296 UINT8 Reserved4
[3]; /* Reserved, must be zero */
297 UINT64 XFacs
; /* 64-bit physical address of FACS */
298 UINT64 XDsdt
; /* 64-bit physical address of DSDT */
299 ACPI_GENERIC_ADDRESS XPm1aEventBlock
; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
300 ACPI_GENERIC_ADDRESS XPm1bEventBlock
; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
301 ACPI_GENERIC_ADDRESS XPm1aControlBlock
; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
302 ACPI_GENERIC_ADDRESS XPm1bControlBlock
; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
303 ACPI_GENERIC_ADDRESS XPm2ControlBlock
; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
304 ACPI_GENERIC_ADDRESS XPmTimerBlock
; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
305 ACPI_GENERIC_ADDRESS XGpe0Block
; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
306 ACPI_GENERIC_ADDRESS XGpe1Block
; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
307 ACPI_GENERIC_ADDRESS SleepControl
; /* 64-bit Sleep Control register (ACPI 5.0) */
308 ACPI_GENERIC_ADDRESS SleepStatus
; /* 64-bit Sleep Status register (ACPI 5.0) */
313 /* Masks for FADT Boot Architecture Flags (BootFlags) [Vx]=Introduced in this FADT revision */
315 #define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
316 #define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
317 #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
318 #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
319 #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
320 #define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */
322 /* Masks for FADT flags */
324 #define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */
325 #define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */
326 #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
327 #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
328 #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
329 #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
330 #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */
331 #define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
332 #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
333 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
334 #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
335 #define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
336 #define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
337 #define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
338 #define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
339 #define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
340 #define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
341 #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
342 #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
343 #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
344 #define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
345 #define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
348 /* Values for PreferredProfile (Preferred Power Management Profiles) */
350 enum AcpiPreferredPmProfiles
356 PM_ENTERPRISE_SERVER
= 4,
359 PM_PERFORMANCE_SERVER
= 7,
363 /* Values for SleepStatus and SleepControl registers (V5 FADT) */
365 #define ACPI_X_WAKE_STATUS 0x80
366 #define ACPI_X_SLEEP_TYPE_MASK 0x1C
367 #define ACPI_X_SLEEP_TYPE_POSITION 0x02
368 #define ACPI_X_SLEEP_ENABLE 0x20
371 /* Reset to default packing */
377 * Internal table-related structures
379 typedef union acpi_name_union
387 /* Internal ACPI Table Descriptor. One per ACPI table. */
389 typedef struct acpi_table_desc
391 ACPI_PHYSICAL_ADDRESS Address
;
392 ACPI_TABLE_HEADER
*Pointer
;
393 UINT32 Length
; /* Length fixed at 32 bits (fixed in table header) */
394 ACPI_NAME_UNION Signature
;
395 ACPI_OWNER_ID OwnerId
;
400 /* Masks for Flags field above */
402 #define ACPI_TABLE_ORIGIN_UNKNOWN (0)
403 #define ACPI_TABLE_ORIGIN_MAPPED (1)
404 #define ACPI_TABLE_ORIGIN_ALLOCATED (2)
405 #define ACPI_TABLE_ORIGIN_OVERRIDE (4)
406 #define ACPI_TABLE_ORIGIN_MASK (7)
407 #define ACPI_TABLE_IS_LOADED (8)
411 * Get the remaining ACPI tables
417 /* Macros used to generate offsets to specific table fields */
419 #define ACPI_FADT_OFFSET(f) (UINT16) ACPI_OFFSET (ACPI_TABLE_FADT, f)
422 * Sizes of the various flavors of FADT. We need to look closely
423 * at the FADT length because the version number essentially tells
424 * us nothing because of many BIOS bugs where the version does not
425 * match the expected length. In other words, the length of the
426 * FADT is the bottom line as to what the version really is.
428 * For reference, the values below are as follows:
429 * FADT V1 size: 0x074
430 * FADT V2 size: 0x084
431 * FADT V3 size: 0x0F4
432 * FADT V4 size: 0x0F4
433 * FADT V5 size: 0x10C
435 #define ACPI_FADT_V1_SIZE (UINT32) (ACPI_FADT_OFFSET (Flags) + 4)
436 #define ACPI_FADT_V2_SIZE (UINT32) (ACPI_FADT_OFFSET (Reserved4[0]) + 3)
437 #define ACPI_FADT_V3_SIZE (UINT32) (ACPI_FADT_OFFSET (SleepControl))
438 #define ACPI_FADT_V5_SIZE (UINT32) (sizeof (ACPI_TABLE_FADT))
440 #endif /* __ACTBL_H__ */