Check for SYS/GL during library init. Reason is that
[AROS.git] / workbench / devs / AHI / Drivers / SB128 / regs.h
bloba7f9bc8530885b3f3576a98a2e8192dba103cda4
1 /*
3 The contents of this file are subject to the AROS Public License Version 1.1 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
4 http://www.aros.org/license.html
6 Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF
7 ANY KIND, either express or implied. See the License for the specific language governing rights and
8 limitations under the License.
10 The Original Code is (C) Copyright 2004-2011 Ross Vumbaca.
12 The Initial Developer of the Original Code is Ross Vumbaca.
14 All Rights Reserved.
18 #ifndef _REGS_H
19 #define _REGS_H
21 #define CACHELINE_SIZE 32
23 /* Basic registers */
25 #define SB128_CONTROL 0x00
26 #define SB128_STATUS 0x04
28 #define SB128_MIDI_DATA 0x08
29 #define SB128_MIDI_STATUS 0x09
30 #define SB128_MIDI_TEST 0x0A
32 #define SB128_MEMPAGE 0x0C
34 #define SB128_SRC 0x10
36 #define SB128_CODEC 0x14
38 #define SB128_LEGACY 0x18
40 #define SB128_SCON 0x20
42 #define SB128_DAC1_SCOUNT 0x24
43 #define SB128_DAC2_SCOUNT 0x28
44 #define SB128_ADC_SCOUNT 0x2C
46 #define SB128_PAGE_DAC 0x0C
47 #define SB128_PAGE_ADC 0x0D
49 #define SB128_DAC1_FRAME 0x30
50 #define SB128_DAC1_COUNT 0x34
51 #define SB128_DAC2_FRAME 0x38
52 #define SB128_DAC2_COUNT 0x3C
53 #define SB128_ADC_FRAME 0x30
54 #define SB128_ADC_COUNT 0x34
56 /* ES1370 specific, not present on other chips */
58 #define ES1370_SB128_CODEC 0x10
62 /* DAC/ADC and misc Control */
64 #define CTRL_DAC1_EN 0x00000040 /* Enable DAC1 */
65 #define CTRL_DAC2_EN 0x00000020 /* Enable DAC2 */
66 #define CTRL_ADC_EN 0x00000010 /* Enable ADC */
68 /* ES1370 specific, not present on other chips */
70 #define CTRL_CDC_EN 0x00000002 /* Enable Codec Control */
72 /* Magical formula for DAC2 frequency */
73 #define DAC2_SRTODIV(x) (((1411200 + (x) / 2) / (x) - 2) & 0x1fff)
75 #define DAC2_DIV_SHIFT 16
77 #define DAC2_DIV_MASK 0x1fff0000
80 /* Codec Control */
82 #define CODEC_RESET 0x00004000
84 #define CODEC_WIP 0x40000000
85 #define CODEC_RDY 0x80000000
87 #define CODEC_ADD_SHIFT 16
88 #define CODEC_ADD_MASK 0x007F0000
89 #define CODEC_READ 0x00800000
91 /* ES1370 specific, not present on other chips */
93 #define CODEC_CSTAT 0x00000200
95 #define ES1370_CODEC_ADD_SHIFT 8
97 /* Sample Rate Converter */
99 #define SRC_DISABLE 0x00400000
100 #define SRC_BUSY 0x00800000
101 #define SRC_DIS_DAC1 0x00200000
102 #define SRC_DIS_DAC2 0x00100000
103 #define SRC_DIS_ADC 0x00080000
105 #define SRC_DAC1 0x70
106 #define SRC_DAC2 0x74
107 #define SRC_ADC 0x78
109 #define SRC_VOL_ADC 0x6C
110 #define SRC_VOL_DAC1 0x7C
111 #define SRC_VOL_DAC2 0x7E
114 /* Offsets for some "Magic" SRC bits */
116 #define SRC_TRUNC 0x00
117 #define SRC_INT 0x01
118 #define SRC_VF 0x03
120 #define SRC_ADDR_SHIFT 25
121 #define SRC_WE 0x01000000
124 /* Interrupts */
126 #define SB128_IRQ_MASK 0xFFFFF8FF /* To disable all playback/record interrupts */
127 #define SB128_INT_PENDING 0x80000000 /* Interrupt pending */
128 #define SB128_INT_DAC1 0x00000004 /* DAC1 Interrupt pending */
129 #define SB128_INT_DAC2 0x00000002 /* DAC2 Interrupt pending */
130 #define SB128_INT_ADC 0x00000001 /* ADC Interrupt pending */
131 #define SB128_DAC1_INTEN 0x00000100 /* Enable DAC1 Interrupts */
132 #define SB128_DAC2_INTEN 0x00000200 /* Enable DAC2 Interrupts */
133 #define SB128_ADC_INTEN 0x00000400 /* Enable ADC Interrupts */
136 /* Data Format */
138 #define SB128_STEREO 0x1
139 #define SB128_16BIT 0x2
143 /* ES1370 specific - AK4531 registers */
145 /* Output volumes */
147 #define AK4531_MASTER_VOL_L 0x00 /* -62 dB to 0 dB attentuation */
148 #define AK4531_MASTER_VOL_R 0x01 /* -62 dB to 0 dB attentuation */
150 #define AK4531_MASTER_VOL_MONO 0x0F /* -28 dB to 0 dB attentuation */
152 /* Input gain */
154 #define AK4531_PCMOUT_VOL_L 0x02 /* Adjustable gain from -50 dB to +12 dB for all below */
155 #define AK4531_PCMOUT_VOL_R 0x03
156 #define AK4531_CD_VOL_L 0x06
157 #define AK4531_CD_VOL_R 0x07
158 #define AK4531_LINEIN_VOL_L 0x08
159 #define AK4531_LINEIN_VOL_R 0x09
160 #define AK4531_AUX_VOL_L 0x0A
161 #define AK4531_AUX_VOL_R 0x0B
162 #define AK4531_PHONE_VOL_L 0x0C
163 #define AK4531_PHONE_VOL_R 0x0D
164 #define AK4531_MIC_VOL 0x0E
166 /* Mixer registers */
168 #define AK4531_OUTPUT_MUX_1 0x10
169 #define AK4531_OUTPUT_MUX_2 0x11
171 #define AK4531_INPUT_MUX_L_1 0x12
172 #define AK4531_INPUT_MUX_R_1 0x13
174 #define AK4531_INPUT_MUX_L_2 0x14
175 #define AK4531_INPUT_MUX_R_2 0x15
177 /* Output MUX bits */
179 #define AK4531_OUTPUT_CD 0x06
180 #define AK4531_OUTPUT_LINE 0x18
181 #define AK4531_OUTPUT_AUX 0x30
183 /* Other stuff */
185 #define AK4531_MUTE 0x80
187 #define AK4531_RECORD_SELECT 0x18 /* Input from mixer or external pins */
189 #define AK4531_RECORD_GAIN_MIC 0x19 /* Either 0 dB or 30 dB gain */
191 #define AK4531_RESET 0x16
192 #define AK4531_CLOCK_SEL 0x17
196 /* AC97 Registers */
198 #define AC97_RESET 0x0000
201 /* Play master volume registers */
203 #define AC97_MASTER_VOL_STEREO 0x0002 /* -94.5 to 0.0 dB attenuation */
204 #define AC97_AUXOUT_VOL 0x0004 /* "" + can be impl. as line level out, headphone out or 4ch out. Most likely 4ch out vol. */
205 #define AC97_MASTER_VOL_MONO 0x0006 /* "" */
207 #define AC97_MASTER_TONE 0x0008 /* bass / treble */
208 #define AC97_PCBEEP_VOL 0x000a
211 /* Analog mixer input gain registers
212 5-bit gain: -32.5 dB attenuation to +12.0 dB gain
213 0x0008 is 0dB gain, 0x8008 is 0dB gain with mute on */
215 #define AC97_PHONE_VOL 0x000c /* mono: only bits 0-4 */
216 #define AC97_MIC_VOL 0x000e /* mono + bit 6 is 20dB boost switch */
217 #define AC97_LINEIN_VOL 0x0010 /* stereo */
218 #define AC97_CD_VOL 0x0012
219 #define AC97_VIDEO_VOL 0x0014
220 #define AC97_AUX_VOL 0x0016
221 #define AC97_PCMOUT_VOL 0x0018
223 #define AC97_RECORD_SELECT 0x001a
226 /* 0dB to 22.5 dB gain on the stereo input */
228 #define AC97_RECORD_GAIN 0x001c
229 #define AC97_RECORD_GAIN_MIC 0x001e
231 #define AC97_GENERAL_PURPOSE 0x0020
232 #define AC97_3D_CONTROL 0x0022
235 /* Mostly a read-only register (except D5 and D4 which control optional DAC slot assignment)
236 controls variable SRC, double-rate output, multi-channel output and S/PDIF output */
238 #define AC97_EXTENDED_ID 0x0028
239 #define AC97_EXTENDED_CTRL 0x002a
241 #define AC97_SPDIF_CTRL 0x003a
243 #define AC97_SURROUND_MASTER 0x0038
245 #define AC97_VENDOR_ID0 0x007C
246 #define AC97_VENDOR_ID1 0x007E
248 #define AC97_MUTE 0x8000
250 #define AC97_RECMUX_MIC 0x0000
251 #define AC97_RECMUX_CD 0x0101
252 #define AC97_RECMUX_VIDEO 0x0202
253 #define AC97_RECMUX_AUX 0x0303
254 #define AC97_RECMUX_LINE 0x0404
255 #define AC97_RECMUX_STEREO_MIX 0x0505
256 #define AC97_RECMUX_MONO_MIX 0x0606
257 #define AC97_RECMUX_PHONE 0x0707
260 #endif /* _REGS_H */