src/variants/FM30/PeripheralPins.c

   1 /*
   2  *******************************************************************************
   3  * Copyright (c) 2019, STMicroelectronics
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *
   9  * 1. Redistributions of source code must retain the above copyright notice,
  10  *    this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright notice,
  12  *    this list of conditions and the following disclaimer in the documentation
  13  *    and/or other materials provided with the distribution.
  14  * 3. Neither the name of STMicroelectronics nor the names of its contributors
  15  *    may be used to endorse or promote products derived from this software
  16  *    without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  19  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  21  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  24  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  25  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  26  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  27  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28  *******************************************************************************
  29  * Automatically generated from STM32F103C(4-6)|(8-B)Tx.xml
  30  */
  31 #include "Arduino.h"
  32 #include "PeripheralPins.h"
  33
  34 /* =====
  35  * Note: Commented lines are alternative possibilities which are not used per default.
  36  *       If you change them, you will have to know what you do
  37  * =====
  38  */
  39
  40 //*** ADC ***
  41
  42 #ifdef HAL_ADC_MODULE_ENABLED
  43 WEAK const PinMap PinMap_ADC[] = {
  44   {PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
  45   //  {PA_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
  46   {PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
  47   //  {PA_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
  48   {PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
  49   //  {PA_2,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
  50   {PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
  51   //  {PA_3,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
  52   {PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
  53   //  {PA_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
  54   {PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
  55   //  {PA_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
  56   {PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
  57   //  {PA_6,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
  58   {PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
  59   //  {PA_7,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
  60   {PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
  61   //  {PB_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
  62   {PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
  63   //  {PB_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
  64   {NC,    NP,    0}
  65 };
  66 #endif
  67
  68 //*** No DAC ***
  69
  70 //*** I2C ***
  71
  72 #ifdef HAL_I2C_MODULE_ENABLED
  73 WEAK const PinMap PinMap_I2C_SDA[] = {
  74   {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
  75   {PB_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)},
  76 #ifndef ARDUINO_BLUEPILL_F103C6
  77   {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
  78 #endif
  79   {NC,    NP,    0}
  80 };
  81 #endif
  82
  83 #ifdef HAL_I2C_MODULE_ENABLED
  84 WEAK const PinMap PinMap_I2C_SCL[] = {
  85   {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
  86   {PB_8,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)},
  87 #ifndef ARDUINO_BLUEPILL_F103C6
  88   {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
  89 #endif
  90   {NC,    NP,    0}
  91 };
  92 #endif
  93
  94 //*** PWM ***
  95
  96 #ifdef HAL_TIM_MODULE_ENABLED
  97 WEAK const PinMap PinMap_PWM[] = {
  98   {PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1
  99   //  {PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1
 100   {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2
 101   //  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2
 102   {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
 103   //  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
 104   {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
 105   //  {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4
 106   {PA_6,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
 107   //  {PA_7,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
 108   {PA_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
 109   {PA_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
 110   //  {PA_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1
 111   {PA_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2
 112   //  {PA_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2
 113   {PA_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3
 114   //  {PA_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3
 115   {PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4
 116   //  {PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4
 117   //  {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1
 118   {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1
 119   //  {PB_0,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N
 120   {PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3
 121   //  {PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3
 122   //  {PB_1,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N
 123   {PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4
 124   //  {PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4
 125   //  {PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2
 126   {PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2
 127   {PB_4,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1
 128   {PB_5,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2
 129 #ifndef ARDUINO_BLUEPILL_F103C6
 130   {PB_6,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
 131   {PB_7,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
 132   {PB_8,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
 133   {PB_9,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
 134 #endif
 135   //  {PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
 136   {PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3
 137   //  {PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4
 138   {PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
 139   {PB_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
 140   {PB_14, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
 141   {PB_15, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
 142   {NC,    NP,    0}
 143 };
 144 #endif
 145
 146 //*** SERIAL ***
 147
 148 #ifdef HAL_UART_MODULE_ENABLED
 149 WEAK const PinMap PinMap_UART_TX[] = {
 150   {PA_2,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 151   {PA_9,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 152   {PB_6,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_ENABLE)},
 153 #ifndef ARDUINO_BLUEPILL_F103C6
 154   {PB_10, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 155 #endif
 156   {NC,    NP,    0}
 157 };
 158 #endif
 159
 160 #ifdef HAL_UART_MODULE_ENABLED
 161 WEAK const PinMap PinMap_UART_RX[] = {
 162   {PA_3,  USART2,  STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
 163   {PA_10, USART1,  STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
 164   {PB_7,  USART1,  STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_ENABLE)},
 165 #ifndef ARDUINO_BLUEPILL_F103C6
 166   {PB_11, USART3,  STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
 167 #endif
 168   {NC,    NP,    0}
 169 };
 170 #endif
 171
 172 #ifdef HAL_UART_MODULE_ENABLED
 173 WEAK const PinMap PinMap_UART_RTS[] = {
 174   {PA_1,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 175   {PA_12, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 176 #ifndef ARDUINO_BLUEPILL_F103C6
 177   {PB_14, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 178   //  {PB_14, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
 179 #endif
 180   {NC,    NP,    0}
 181 };
 182 #endif
 183
 184 #ifdef HAL_UART_MODULE_ENABLED
 185 WEAK const PinMap PinMap_UART_CTS[] = {
 186   {PA_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 187   {PA_11, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 188 #ifndef ARDUINO_BLUEPILL_F103C6
 189   {PB_13, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 190   //  {PB_13, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
 191 #endif
 192   {NC,    NP,    0}
 193 };
 194 #endif
 195
 196 //*** SPI ***
 197
 198 #ifdef HAL_SPI_MODULE_ENABLED
 199 WEAK const PinMap PinMap_SPI_MOSI[] = {
 200   {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 201   {PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
 202 #ifndef ARDUINO_BLUEPILL_F103C6
 203   {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 204 #endif
 205   {NC,    NP,    0}
 206 };
 207 #endif
 208
 209 #ifdef HAL_SPI_MODULE_ENABLED
 210 WEAK const PinMap PinMap_SPI_MISO[] = {
 211   {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 212   {PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
 213 #ifndef ARDUINO_BLUEPILL_F103C6
 214   {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 215 #endif
 216   {NC,    NP,    0}
 217 };
 218 #endif
 219
 220 #ifdef HAL_SPI_MODULE_ENABLED
 221 WEAK const PinMap PinMap_SPI_SCLK[] = {
 222   {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 223   {PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
 224 #ifndef ARDUINO_BLUEPILL_F103C6
 225   {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 226 #endif
 227   {NC,    NP,    0}
 228 };
 229 #endif
 230
 231 #ifdef HAL_SPI_MODULE_ENABLED
 232 WEAK const PinMap PinMap_SPI_SSEL[] = {
 233   {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 234   {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
 235 #ifndef ARDUINO_BLUEPILL_F103C6
 236   {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
 237 #endif
 238   {NC,    NP,    0}
 239 };
 240 #endif
 241
 242 //*** CAN ***
 243
 244 #ifdef HAL_CAN_MODULE_ENABLED
 245 WEAK const PinMap PinMap_CAN_RD[] = {
 246   {PA_11, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)},
 247   {PB_8,  CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_CAN1_2)},
 248   {NC,    NP,    0}
 249 };
 250 #endif
 251
 252 #ifdef HAL_CAN_MODULE_ENABLED
 253 WEAK const PinMap PinMap_CAN_TD[] = {
 254   {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)},
 255   {PB_9,  CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_CAN1_2)},
 256   {NC,    NP,    0}
 257 };
 258 #endif
 259
 260 //*** No ETHERNET ***
 261
 262 //*** No QUADSPI ***
 263
 264 //*** USB ***
 265
 266 #ifdef HAL_PCD_MODULE_ENABLED
 267 WEAK const PinMap PinMap_USB[] = {
 268   {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM
 269   {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP
 270   {NC,    NP,    0}
 271 };
 272 #endif
 273
 274 //*** No USB_OTG_FS ***
 275
 276 //*** No USB_OTG_HS ***