include/svx/svdovirt.hxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #ifndef INCLUDED_SVX_SVDOVIRT_HXX
  21 #define INCLUDED_SVX_SVDOVIRT_HXX
  22
  23 #include <svx/svdobj.hxx>
  24 #include <svx/svxdllapi.h>
  25
  26
  27
  28 //   SdrVirtObj
  29
  30 // Achtung! Das virtuelle Objekt ist noch nicht bis in alle Feinheiten
  31 // durchprogrammiert und getestet. Z.Zt. kommt es nur in abgeleiteter
  32 // beim Writer zum Einsatz.
  33
  34
  35
  36 class SVX_DLLPUBLIC SdrVirtObj : public SdrObject
  37 {
  38     SdrVirtObj( const SdrVirtObj& ) SAL_DELETED_FUNCTION;
  39 public:
  40     virtual sdr::properties::BaseProperties& GetProperties() const SAL_OVERRIDE;
  41
  42 protected:
  43     virtual sdr::contact::ViewContact* CreateObjectSpecificViewContact() SAL_OVERRIDE;
  44
  45     SdrObject&                  rRefObj; // Referenziertes Zeichenobjekt
  46     Rectangle                   aSnapRect;
  47
  48 protected:
  49     virtual void Notify(SfxBroadcaster& rBC, const SfxHint& rHint) SAL_OVERRIDE;
  50
  51     virtual SdrObjGeoData* NewGeoData() const SAL_OVERRIDE;
  52     virtual void SaveGeoData(SdrObjGeoData& rGeo) const SAL_OVERRIDE;
  53     virtual void RestGeoData(const SdrObjGeoData& rGeo) SAL_OVERRIDE;
  54
  55 public:
  56     TYPEINFO_OVERRIDE();
  57     SdrVirtObj(SdrObject& rNewObj);
  58     virtual ~SdrVirtObj();
  59     SdrObject& ReferencedObj();
  60     const SdrObject& GetReferencedObj() const;
  61     virtual void NbcSetAnchorPos(const Point& rAnchorPos) SAL_OVERRIDE;
  62     virtual void SetModel(SdrModel* pNewModel) SAL_OVERRIDE;
  63
  64     virtual void TakeObjInfo(SdrObjTransformInfoRec& rInfo) const SAL_OVERRIDE;
  65     virtual sal_uInt32 GetObjInventor() const SAL_OVERRIDE;
  66     virtual sal_uInt16 GetObjIdentifier() const SAL_OVERRIDE;
  67     virtual SdrObjList* GetSubList() const SAL_OVERRIDE;
  68
  69     virtual const Rectangle& GetCurrentBoundRect() const SAL_OVERRIDE;
  70     virtual const Rectangle& GetLastBoundRect() const SAL_OVERRIDE;
  71     virtual void RecalcBoundRect() SAL_OVERRIDE;
  72     virtual void SetChanged() SAL_OVERRIDE;
  73     virtual SdrVirtObj* Clone() const SAL_OVERRIDE;
  74     SdrVirtObj& operator=(const SdrVirtObj& rObj);
  75
  76     virtual OUString TakeObjNameSingul() const SAL_OVERRIDE;
  77     virtual OUString TakeObjNamePlural() const SAL_OVERRIDE;
  78
  79     virtual basegfx::B2DPolyPolygon TakeXorPoly() const SAL_OVERRIDE;
  80     virtual sal_uInt32 GetHdlCount() const SAL_OVERRIDE;
  81     virtual SdrHdl* GetHdl(sal_uInt32 nHdlNum) const SAL_OVERRIDE;
  82     virtual sal_uInt32 GetPlusHdlCount(const SdrHdl& rHdl) const SAL_OVERRIDE;
  83     virtual SdrHdl* GetPlusHdl(const SdrHdl& rHdl, sal_uInt32 nPlNum) const SAL_OVERRIDE;
  84     virtual void AddToHdlList(SdrHdlList& rHdlList) const SAL_OVERRIDE;
  85
  86     // special drag methods
  87     virtual bool hasSpecialDrag() const SAL_OVERRIDE;
  88     virtual bool beginSpecialDrag(SdrDragStat& rDrag) const SAL_OVERRIDE;
  89     virtual bool applySpecialDrag(SdrDragStat& rDrag) SAL_OVERRIDE;
  90     virtual OUString getSpecialDragComment(const SdrDragStat& rDrag) const SAL_OVERRIDE;
  91     virtual basegfx::B2DPolyPolygon getSpecialDragPoly(const SdrDragStat& rDrag) const SAL_OVERRIDE;
  92
  93     // FullDrag support
  94     virtual bool supportsFullDrag() const SAL_OVERRIDE;
  95     virtual SdrObject* getFullDragClone() const SAL_OVERRIDE;
  96
  97     virtual bool BegCreate(SdrDragStat& rStat) SAL_OVERRIDE;
  98     virtual bool MovCreate(SdrDragStat& rStat) SAL_OVERRIDE;
  99     virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) SAL_OVERRIDE;
 100     virtual bool BckCreate(SdrDragStat& rStat) SAL_OVERRIDE;
 101     virtual void BrkCreate(SdrDragStat& rStat) SAL_OVERRIDE;
 102     virtual basegfx::B2DPolyPolygon TakeCreatePoly(const SdrDragStat& rDrag) const SAL_OVERRIDE;
 103
 104     virtual void NbcMove(const Size& rSiz) SAL_OVERRIDE;
 105     virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) SAL_OVERRIDE;
 106     virtual void NbcRotate(const Point& rRef, long nAngle, double sn, double cs) SAL_OVERRIDE;
 107     virtual void NbcMirror(const Point& rRef1, const Point& rRef2) SAL_OVERRIDE;
 108     virtual void NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear) SAL_OVERRIDE;
 109
 110     virtual void Move(const Size& rSiz) SAL_OVERRIDE;
 111     virtual void Resize(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bUnsetRelative = true) SAL_OVERRIDE;
 112     virtual void Rotate(const Point& rRef, long nAngle, double sn, double cs) SAL_OVERRIDE;
 113     virtual void Mirror(const Point& rRef1, const Point& rRef2) SAL_OVERRIDE;
 114     virtual void Shear(const Point& rRef, long nAngle, double tn, bool bVShear) SAL_OVERRIDE;
 115
 116     virtual void RecalcSnapRect() SAL_OVERRIDE;
 117     virtual const Rectangle& GetSnapRect() const SAL_OVERRIDE;
 118     virtual void SetSnapRect(const Rectangle& rRect) SAL_OVERRIDE;
 119     virtual void NbcSetSnapRect(const Rectangle& rRect) SAL_OVERRIDE;
 120
 121     virtual const Rectangle& GetLogicRect() const SAL_OVERRIDE;
 122     virtual void SetLogicRect(const Rectangle& rRect) SAL_OVERRIDE;
 123     virtual void NbcSetLogicRect(const Rectangle& rRect) SAL_OVERRIDE;
 124
 125     virtual long GetRotateAngle() const SAL_OVERRIDE;
 126     virtual long GetShearAngle(bool bVertical = false) const SAL_OVERRIDE;
 127
 128     virtual sal_uInt32 GetSnapPointCount() const SAL_OVERRIDE;
 129     virtual Point GetSnapPoint(sal_uInt32 i) const SAL_OVERRIDE;
 130
 131     virtual bool IsPolyObj() const SAL_OVERRIDE;
 132     virtual sal_uInt32 GetPointCount() const SAL_OVERRIDE;
 133     virtual Point GetPoint(sal_uInt32 i) const SAL_OVERRIDE;
 134     virtual void NbcSetPoint(const Point& rPnt, sal_uInt32 i) SAL_OVERRIDE;
 135
 136     virtual SdrObjGeoData* GetGeoData() const SAL_OVERRIDE;
 137     virtual void SetGeoData(const SdrObjGeoData& rGeo) SAL_OVERRIDE;
 138
 139     virtual void NbcReformatText() SAL_OVERRIDE;
 140     virtual void ReformatText() SAL_OVERRIDE;
 141
 142     virtual bool HasMacro() const SAL_OVERRIDE;
 143     virtual SdrObject* CheckMacroHit (const SdrObjMacroHitRec& rRec) const SAL_OVERRIDE;
 144     virtual Pointer GetMacroPointer (const SdrObjMacroHitRec& rRec) const SAL_OVERRIDE;
 145     virtual void PaintMacro (OutputDevice& rOut, const Rectangle& rDirtyRect, const SdrObjMacroHitRec& rRec) const SAL_OVERRIDE;
 146     virtual bool DoMacro (const SdrObjMacroHitRec& rRec) SAL_OVERRIDE;
 147     virtual OUString GetMacroPopupComment(const SdrObjMacroHitRec& rRec) const SAL_OVERRIDE;
 148
 149     // OD 30.06.2003 #108784# - virtual <GetOffset()> returns Point(0,0)
 150     // #i73248# for default SdrVirtObj, offset is aAnchor, not (0,0)
 151     virtual const Point GetOffset() const;
 152 };
 153
 154
 155
 156 #endif // INCLUDED_SVX_SVDOVIRT_HXX
 157
 158 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */