lok: vcl: fix multiple floatwin removal case more robustly.
[LibreOffice.git] / sal / osl / w32 / file_error.cxx
blob5336c17fd9702d038cee406fdb887cfa115011e0
1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2 /*
3 * This file is part of the LibreOffice project.
5 * This Source Code Form is subject to the terms of the Mozilla Public
6 * License, v. 2.0. If a copy of the MPL was not distributed with this
7 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
9 * This file incorporates work covered by the following license notice:
11 * Licensed to the Apache Software Foundation (ASF) under one or more
12 * contributor license agreements. See the NOTICE file distributed
13 * with this work for additional information regarding copyright
14 * ownership. The ASF licenses this file to you under the Apache
15 * License, Version 2.0 (the "License"); you may not use this file
16 * except in compliance with the License. You may obtain a copy of
17 * the License at http://www.apache.org/licenses/LICENSE-2.0 .
20 #include "file_error.hxx"
21 #include <winerror.h>
23 /* OS error to oslFileError values mapping table */
24 struct osl_file_error_entry
26 unsigned long oscode; /* OS return value */
27 int errnocode; /* oslFileError code */
30 static const struct osl_file_error_entry errtable[] = {
31 { ERROR_SUCCESS, osl_File_E_None }, /* 0 */
32 { ERROR_INVALID_FUNCTION, osl_File_E_INVAL }, /* 1 */
33 { ERROR_FILE_NOT_FOUND, osl_File_E_NOENT }, /* 2 */
34 { ERROR_PATH_NOT_FOUND, osl_File_E_NOENT }, /* 3 */
35 { ERROR_TOO_MANY_OPEN_FILES, osl_File_E_MFILE }, /* 4 */
36 { ERROR_ACCESS_DENIED, osl_File_E_ACCES }, /* 5 */
37 { ERROR_INVALID_HANDLE, osl_File_E_BADF }, /* 6 */
38 { ERROR_ARENA_TRASHED, osl_File_E_NOMEM }, /* 7 */
39 { ERROR_NOT_ENOUGH_MEMORY, osl_File_E_NOMEM }, /* 8 */
40 { ERROR_INVALID_BLOCK, osl_File_E_NOMEM }, /* 9 */
41 { ERROR_BAD_ENVIRONMENT, osl_File_E_2BIG }, /* 10 */
42 { ERROR_BAD_FORMAT, osl_File_E_NOEXEC }, /* 11 */
43 { ERROR_INVALID_ACCESS, osl_File_E_INVAL }, /* 12 */
44 { ERROR_INVALID_DATA, osl_File_E_INVAL }, /* 13 */
45 { ERROR_INVALID_DRIVE, osl_File_E_NOENT }, /* 15 */
46 { ERROR_CURRENT_DIRECTORY, osl_File_E_ACCES }, /* 16 */
47 { ERROR_NOT_SAME_DEVICE, osl_File_E_XDEV }, /* 17 */
48 { ERROR_NO_MORE_FILES, osl_File_E_NOENT }, /* 18 */
49 { ERROR_NOT_READY, osl_File_E_NOTREADY }, /* 21 */
50 { ERROR_SHARING_VIOLATION, osl_File_E_ACCES }, /* 32 */
51 { ERROR_LOCK_VIOLATION, osl_File_E_ACCES }, /* 33 */
52 { ERROR_BAD_NETPATH, osl_File_E_NOENT }, /* 53 */
53 { ERROR_NETWORK_ACCESS_DENIED, osl_File_E_ACCES }, /* 65 */
54 { ERROR_BAD_NET_NAME, osl_File_E_NOENT }, /* 67 */
55 { ERROR_FILE_EXISTS, osl_File_E_EXIST }, /* 80 */
56 { ERROR_CANNOT_MAKE, osl_File_E_ACCES }, /* 82 */
57 { ERROR_FAIL_I24, osl_File_E_ACCES }, /* 83 */
58 { ERROR_INVALID_PARAMETER, osl_File_E_INVAL }, /* 87 */
59 { ERROR_NO_PROC_SLOTS, osl_File_E_AGAIN }, /* 89 */
60 { ERROR_DRIVE_LOCKED, osl_File_E_ACCES }, /* 108 */
61 { ERROR_BROKEN_PIPE, osl_File_E_PIPE }, /* 109 */
62 { ERROR_DISK_FULL, osl_File_E_NOSPC }, /* 112 */
63 { ERROR_INVALID_TARGET_HANDLE, osl_File_E_BADF }, /* 114 */
64 { ERROR_INVALID_NAME, osl_File_E_NOENT }, /* 123 */
65 { ERROR_INVALID_HANDLE, osl_File_E_INVAL }, /* 124 */
66 { ERROR_WAIT_NO_CHILDREN, osl_File_E_CHILD }, /* 128 */
67 { ERROR_CHILD_NOT_COMPLETE, osl_File_E_CHILD }, /* 129 */
68 { ERROR_DIRECT_ACCESS_HANDLE, osl_File_E_BADF }, /* 130 */
69 { ERROR_NEGATIVE_SEEK, osl_File_E_INVAL }, /* 131 */
70 { ERROR_SEEK_ON_DEVICE, osl_File_E_ACCES }, /* 132 */
71 { ERROR_DIR_NOT_EMPTY, osl_File_E_NOTEMPTY }, /* 145 */
72 { ERROR_NOT_LOCKED, osl_File_E_ACCES }, /* 158 */
73 { ERROR_BAD_PATHNAME, osl_File_E_NOENT }, /* 161 */
74 { ERROR_MAX_THRDS_REACHED, osl_File_E_AGAIN }, /* 164 */
75 { ERROR_LOCK_FAILED, osl_File_E_ACCES }, /* 167 */
76 { ERROR_ALREADY_EXISTS, osl_File_E_EXIST }, /* 183 */
77 { ERROR_FILENAME_EXCED_RANGE, osl_File_E_NOENT }, /* 206 */
78 { ERROR_NESTING_NOT_ALLOWED, osl_File_E_AGAIN }, /* 215 */
79 { ERROR_FILE_CHECKED_OUT, osl_File_E_ACCES }, /* 220 */
80 { ERROR_DIRECTORY, osl_File_E_NOENT }, /* 267 */
81 { ERROR_NOT_ENOUGH_QUOTA, osl_File_E_NOMEM }, /* 1816 */
82 { ERROR_CANT_ACCESS_FILE, osl_File_E_ACCES }, /* 1920 */
83 { ERROR_UNEXP_NET_ERR, osl_File_E_NETWORK } /* 59 */
86 /* The following two constants must be the minimum and maximum
87 values in the (contiguous) range of osl_File_E_xec Failure errors.
89 #define MIN_EXEC_ERROR ERROR_INVALID_STARTING_CODESEG
90 #define MAX_EXEC_ERROR ERROR_INFLOOP_IN_RELOC_CHAIN
92 /* These are the low and high value in the range of errors that are
93 access violations
95 #define MIN_EACCES_RANGE ERROR_WRITE_PROTECT
96 #define MAX_EACCES_RANGE ERROR_SHARING_BUFFER_EXCEEDED
98 oslFileError oslTranslateFileError (/*DWORD*/ unsigned long dwError)
100 static const int n = SAL_N_ELEMENTS(errtable);
102 int i;
103 for (i = 0; i < n; ++i )
105 if (dwError == errtable[i].oscode)
106 return static_cast<oslFileError>(errtable[i].errnocode);
109 /* The error code wasn't in the table. We check for a range of
110 osl_File_E_ACCES errors or exec failure errors (ENOEXEC).
111 Otherwise osl_File_E_INVAL is returned.
113 if ( (dwError >= MIN_EACCES_RANGE) && (dwError <= MAX_EACCES_RANGE) )
114 return osl_File_E_ACCES;
115 else if ( (dwError >= MIN_EXEC_ERROR) && (dwError <= MAX_EXEC_ERROR) )
116 return osl_File_E_NOEXEC;
117 else
118 return osl_File_E_INVAL;
121 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */