Makefile.in

   1 # -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
   2 #
   3 # This file is part of the LibreOffice project.
   4 #
   5 # This Source Code Form is subject to the terms of the Mozilla Public
   6 # License, v. 2.0. If a copy of the MPL was not distributed with this
   7 # file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8 #
   9
  10 gb_Top_MODULE_CHECK_TARGETS := slowcheck unitcheck subsequentcheck perfcheck uicheck screenshot
  11
  12 .PHONY : check-if-root bootstrap gbuild build build-non-l10n-only build-l10n-only check clean clean-build clean-host test-install distclean distro-pack-install docs download etags fetch get-submodules id install install-gdb-printers install-strip tags debugrun help showmodules translations packageinfo coverage internal.clean $(gb_Top_MODULE_CHECK_TARGETS)
  13
  14 MAKECMDGOALS?=build
  15 build_goal:=$(if $(filter build uicheck,$(MAKECMDGOALS)),build)\
  16  $(if $(filter check,$(MAKECMDGOALS)),unitcheck slowcheck subsequentcheck $(if $(filter Linux, $(shell uname)), uicheck))\
  17  $(filter build-l10n-only build-non-l10n-only debugrun help showmodules translations $(gb_Top_MODULE_CHECK_TARGETS) check packageinfo gbuildtojson,$(MAKECMDGOALS))
  18
  19 SRCDIR := @SRC_ROOT@
  20 BUILDDIR := @BUILDDIR@
  21 COMPILER_PLUGINS := @COMPILER_PLUGINS@
  22 GIT_BUILD := $(if $(wildcard $(SRCDIR)/.git),T)
  23
  24 # Run autogen.sh if needed and force make to restart itself.
  25 # ... but there are several cases where we do not want to run
  26 # autogen.sh:
  27 # 1. if we are building from tarballs, not git checkout (I do not
  28 #    think packagers would ever want that. I certainly do not.)
  29 # 2. if we are making help, clean or distclean, because they do not
  30 #    need updated configuration
  31 ifeq (,$(MAKE_RESTARTS)$(if $(GIT_BUILD),,T)$(if $(filter-out help showmodules clean distclean,$(MAKECMDGOALS)),,T))
  32
  33 # note: this must touch both Makefile and $(BUILDDIR)/Makefile, because make
  34 # may be invoked using either of these paths, and it will restart itself only
  35 # if the updated target is exactly the same path as the Makefile it is using
  36 .PHONY : force-restart
  37 Makefile $(BUILDDIR)/Makefile: $(BUILDDIR)/config_host.mk $(BUILDDIR)/config_host_lang.mk force-restart
  38         @touch $@
  39
  40 # run configure in an environment not polluted by config_host.mk
  41 $(BUILDDIR)/config_host.mk : $(wildcard \
  42                 $(SRCDIR)/autogen.sh \
  43                 $(SRCDIR)/config_host.mk.in \
  44                 $(SRCDIR)/config_host_lang.mk.in \
  45                 $(SRCDIR)/Makefile.in \
  46                 $(SRCDIR)/instsetoo_native/util/openoffice.lst.in \
  47                 $(SRCDIR)/configure.ac \
  48                 $(SRCDIR)/config_host/*.h.in \
  49                 $(SRCDIR)/download.lst \
  50                 $(SRCDIR)/m4/*.m4 \
  51                 $(BUILDDIR)/autogen.input \
  52                 $(BUILDDIR)/autogen.lastrun \
  53                 ) \
  54                 $(shell . $(SRCDIR)/bin/get_config_variables JAVA_HOME && \
  55                         if test -n "$${JAVA_HOME}" -a ! -d "$${JAVA_HOME}/bin"; then echo force-restart; fi)
  56         sh -c $(SRCDIR)/autogen.sh
  57
  58 else # MAKE_RESTARTS
  59
  60 .DEFAULT_GOAL := build
  61
  62 # Nested test is to check if the systemd-detect-virt command doesn't exist or it reports we're not
  63 # in a container:
  64 check-if-root:
  65         @if test ! `uname` = 'Haiku' -a `id -u` = 0; then \
  66                 if test ! -x "$$(command -v systemd-detect-virt)" || ! systemd-detect-virt -c -q; then \
  67                         echo; \
  68                         echo 'Building LibreOffice as root is a very bad idea, use a regular user.'; \
  69                         echo; \
  70                         exit 1; \
  71                 fi \
  72         fi
  73
  74 gb_Side ?= host
  75
  76 include $(BUILDDIR)/config_$(gb_Side).mk
  77
  78 export GMAKE_OPTIONS?=-r$(if $(verbose),,s)$(value $(MAKEFLAGS))
  79
  80 PARALLELISM_OPTION := $(if $(filter-out 0,$(PARALLELISM)),-j $(PARALLELISM),)
  81
  82 #
  83 # Partial Build
  84 #
  85 define gb_Top_GbuildModuleRules
  86 .PHONY: $(1) $(1).build $(1).all $(1).check $(1).clean $(1).showdeliverables $(1).coverage $(foreach target,$(gb_Top_MODULE_CHECK_TARGETS),$(1).$(target))
  87 .PHONY: $(1).allbuild $(1).buildall $(1).allcheck $(1).checkall
  88
  89 $(1): bootstrap fetch
  90         cd $(SRCDIR)/$(2) && $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS)
  91
  92 $(1).build $(1).check $(1).coverage $(foreach target,$(gb_Top_MODULE_CHECK_TARGETS),$(1).$(target)): bootstrap fetch
  93         cd $(SRCDIR)/$(2) && $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) $$(patsubst $(1).%,%,$$@)
  94
  95 $(1).clean $(1).showdeliverables:
  96         cd $(SRCDIR)/$(2) && $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) $$(patsubst $(1).%,%,$$@)
  97
  98 $(1).allbuild $(1).buildall: bootstrap fetch
  99         $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(WORKDIR)/Module/$(1)
 100
 101 $(1).allcheck $(1).checkall: bootstrap fetch
 102         $$(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(WORKDIR)/Module/$(1) $(WORKDIR)/Module/check/$(1) $(WORKDIR)/Module/slowcheck/$(1)
 103
 104 $(1).all:
 105         @echo "'make $(1).all' was renamed to 'make $(1).allcheck' (or use 'make $(1).allbuild' to build without unit tests)"
 106         @exit 42
 107
 108 endef
 109
 110 define gb_Top_GbuildModulesRules
 111 $(foreach m,$(1),$(call gb_Top_GbuildModuleRules,$(notdir $(m)),$(m)))
 112 endef
 113
 114 gbuild_modules := $(patsubst $(SRCDIR)/%/,%,$(dir $(wildcard $(SRCDIR)/*/Module_*.mk $(SRCDIR)/external/*/Module_*.mk)))
 115
 116 gbuild_internal_modules := $(filter-out odk external,$(patsubst $(SRCDIR)/%/,%,$(dir $(wildcard $(SRCDIR)/*/Module_*.mk))))
 117
 118 internal.clean: $(addsuffix .clean,$(gbuild_internal_modules))
 119
 120
 121 $(eval $(call gb_Top_GbuildModulesRules,$(gbuild_modules)))
 122
 123 gbuild_TARGETS := AllLangHelp \
 124         AllLangMoTarget \
 125         AllLangPackage \
 126         AutoInstall \
 127         CliLibrary \
 128         CliNativeLibrary \
 129         CliUnoApi \
 130         CompilerTest \
 131     ComponentTarget \
 132         Configuration \
 133         CppunitTest \
 134         CustomTarget \
 135         Dictionary \
 136         Executable \
 137         Extension \
 138         ExtensionPackage \
 139         ExtensionPackageSet \
 140         ExternalPackage \
 141         ExternalProject \
 142         Gallery \
 143         GeneratedPackage \
 144         InstallModule \
 145         InstallScript \
 146         InternalUnoApi \
 147         Jar \
 148         JunitTest \
 149         Library \
 150         Module \
 151         Package \
 152         PackageSet \
 153         Pagein \
 154         Postprocess \
 155         Pyuno \
 156         PythonTest \
 157         Rdb \
 158         SdiTarget \
 159         StaticLibrary \
 160         UIConfig \
 161         UITest \
 162         UnoApi \
 163         UnpackedTarball \
 164         WinResTarget \
 165         Zip \
 166
 167 # build a generic gbuild target
 168 $(foreach target,$(gbuild_TARGETS),$(target)_% $(foreach module,$(gbuild_modules),$(target)_$(module)/%)) UIConfig_modules/% %.genpatch: bootstrap fetch
 169         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 170
 171 $(gbuild_TARGETS):
 172         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 173
 174 #
 175 # Clean
 176 #
 177 clean: clean-host clean-build
 178
 179 clean-host:
 180         rm -fr $(TESTINSTALLDIR)
 181         rm -fr $(INSTDIR)
 182         rm -fr $(WORKDIR)
 183
 184 clean-build:
 185 ifneq ($(CROSS_COMPILING),)
 186         rm -fr $(INSTDIR_FOR_BUILD)
 187         rm -fr $(WORKDIR_FOR_BUILD)
 188 ifeq ($(OS),ANDROID)
 189         rm -fr $(BUILDDIR)/android/obj
 190         rm -fr $(BUILDDIR)/android/jniLibs
 191         rm -fr $(SRCDIR)/android/source/build
 192         rm -fr $(SRCDIR)/android/source/assets
 193         rm -fr $(SRCDIR)/android/source/assets_fullUI
 194         rm -fr $(SRCDIR)/android/source/assets_strippedUI
 195         rm -fr $(SRCDIR)/android/source/res_generated
 196 endif
 197 endif
 198
 199 include $(SRCDIR)/compilerplugins/Makefile.mk
 200
 201 #
 202 # Distclean
 203 #
 204 distclean : clean compilerplugins-clean mac-app-store-package.clean
 205         rm -fr \
 206         $(BUILDDIR)/Makefile \
 207         $(BUILDDIR)/aclocal.m4 \
 208         $(BUILDDIR)/autom4te.cache \
 209         $(BUILDDIR)/bin/bffvalidator.sh \
 210         $(BUILDDIR)/bin/odfvalidator.sh \
 211         $(BUILDDIR)/bin/officeotron.sh \
 212         $(BUILDDIR)/config.Build.log \
 213         $(BUILDDIR)/config.Build.warn \
 214         $(BUILDDIR)/config.log \
 215         $(BUILDDIR)/config.status \
 216         $(BUILDDIR)/config.warn \
 217         $(BUILDDIR)/config_build.mk \
 218         $(BUILDDIR)/config_build_lang.mk \
 219         $(BUILDDIR)/config_build \
 220         $(BUILDDIR)/config_host.mk \
 221         $(BUILDDIR)/config_host.mk.stamp \
 222         $(BUILDDIR)/config_host_lang.mk \
 223         $(BUILDDIR)/config_host_lang.mk.stamp \
 224         $(BUILDDIR)/config_host/*.h \
 225         $(BUILDDIR)/configure \
 226         $(BUILDDIR)/hardened_runtime.xcent \
 227         $(BUILDDIR)/instsetoo_native/util/openoffice.lst \
 228         $(BUILDDIR)/solenv/lockfile/autoconf.h \
 229         $(BUILDDIR)/lo.xcent \
 230         $(BUILDDIR)/sysui/desktop/macosx/Info.plist \
 231         $(BUILDDIR)/vs-code*.code-workspace*
 232         $(if $(filter WNT,$(OS)),env -i PATH="$$PATH") $(FIND) $(SRCDIR)/solenv/gdb -name \*.pyc -exec rm -f {} \;
 233
 234 #
 235 # custom command
 236 #
 237 cmd:
 238         $(if $(verbose),echo "custom cmd" &&) ( $(cmd) )
 239
 240 #
 241 # Fetch
 242 #
 243 ifneq ($(DO_FETCH_TARBALLS),)
 244 include $(SRCDIR)/Makefile.fetch
 245 fetch: download
 246 fetch: get-submodules
 247
 248 ifneq (,$(wildcard $(SRCDIR)/.git))
 249 get-submodules:
 250 ifneq ($(foreach i,$(GIT_NEEDED_SUBMODULES),$(SRCDIR)/$(i)/.git),$(wildcard $(foreach i,$(GIT_NEEDED_SUBMODULES),$(SRCDIR)/$(i)/.git)))
 251         cd $(SRCDIR) && ./g -f clone
 252 endif
 253 ifeq ($(shell test -d $(SRCDIR)/.git; echo $$?),0)
 254         @cd $(SRCDIR) && ./g -z # make sure the git hooks are in place even if no submodules are needed
 255 endif
 256
 257 else # these sources are from a tarball, so get the other source tarballs
 258 gb_LO_VER := $(shell . $(SRCDIR)/sources.ver && echo $$lo_sources_ver)
 259 $(if $(gb_LO_VER),,$(error Error while retrieving $$lo_sources_ver from $(SRCDIR)/sources.ver))
 260
 261 get-submodules: | download
 262 ifneq ($(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),$(SRCDIR)/src/libreoffice-$(i)-$(gb_LO_VER)),$(wildcard $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),$(SRCDIR)/src/libreoffice-$(i)-$(gb_LO_VER))))
 263         $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),\
 264                 $(call fetch_Download_item_unchecked,https://download.documentfoundation.org/libreoffice/src/$(shell echo $(gb_LO_VER) | sed -e "s/\([0-9]*\.[0-9]*\.[0-9]*\).*/\1/"),libreoffice-$(i)-$(gb_LO_VER).tar.xz))
 265         $(SRCDIR)/bin/unpack-sources $(SRCDIR) $(foreach i,$(subst helpcontent2,help,$(GIT_NEEDED_SUBMODULES)),\
 266                 $(TARFILE_LOCATION)/libreoffice-$(i)-$(gb_LO_VER).tar.xz)
 267 endif
 268
 269 endif
 270
 271 else
 272 fetch:
 273         @echo "Automatic fetching of external tarballs is disabled."
 274
 275 endif
 276
 277 #
 278 # Bootstrap
 279 #
 280 bootstrap: check-if-root compilerplugins
 281
 282 #
 283 # Build
 284 #
 285 # Note: this will pipe through all gbuild targets to ... gbuild
 286 #       with some translations like "check"->"unitcheck subsequentcheck uicheck" for historic reasons
 287 #
 288 build: bootstrap fetch $(if $(CROSS_COMPILING),cross-toolset,install-gdb-printers) \
 289     $(if $(filter check,$(MAKECMDGOALS)),$(if $(COMPILER_PLUGINS),$(if $(LODE_HOME),clang-format-check)))
 290         $(MAKE) $(PARALLELISM_OPTION) $(IWYU_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $(build_goal)
 291 ifeq ($(OS),iOS)
 292         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) ios
 293 endif
 294
 295 build-non-l10n-only build-l10n-only check debugrun translations packageinfo coverage $(gb_Top_MODULE_CHECK_TARGETS): build
 296
 297 help showmodules gbuildtojson pocheck:
 298         $(MAKE) $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 299
 300 cross-toolset: bootstrap fetch install-gdb-printers
 301 # fetch again in case there are externals only needed on build platform
 302 ifneq ($(OS),iOS)
 303         $(MAKE) gb_Side=build $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(BUILDDIR)/Makefile fetch
 304 endif
 305         $(MAKE) gb_Side=build $(PARALLELISM_OPTION) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild build-tools
 306
 307 install-gdb-printers:
 308 ifneq ($(filter-out WNT MACOSX iOS,$(OS)),)
 309 ifneq ($(INSTDIR_FOR_BUILD),$(INSTDIR))
 310         mkdir -p $(INSTDIR_FOR_BUILD)
 311         $(SRCDIR)/solenv/bin/install-gdb-printers -a $(INSTDIR_FOR_BUILD) -c
 312 endif
 313         mkdir -p $(INSTDIR)
 314         $(SRCDIR)/solenv/bin/install-gdb-printers -a $(INSTDIR) -c
 315 endif
 316
 317
 318 #
 319 # Install
 320 #
 321
 322 define gb_Top_DoInstall
 323 echo "$(1) in $(INSTALLDIR) ..." && \
 324 WITH_LANG_LIST="$(WITH_LANG_LIST)" $(SRCDIR)/solenv/bin/ooinstall $(2) "$(INSTALLDIR)"
 325
 326 endef
 327
 328 ifneq ($(OS),MACOSX)
 329 define gb_Top_InstallFinished
 330 echo && echo "If you want to edit the .ui files with glade first execute:" && \
 331 echo && echo "export GLADE_CATALOG_SEARCH_PATH=$(2)/share/glade" && \
 332 echo && echo "$(1) finished, you can now execute:" && \
 333 echo "$(2)/program/soffice"
 334
 335 endef
 336 else
 337 define gb_Top_InstallFinished
 338 echo && echo "$(1) finished, you can now run: " && \
 339 echo "open $(2)/$(PRODUCTNAME).app" && \
 340 echo "" && \
 341 echo "To debug: gdb $(2)/$(PRODUCTNAME).app/Contents/MacOS/soffice"
 342
 343 endef
 344 endif
 345
 346 ifneq ($(OS),MACOSX)
 347 install:
 348         @$(call gb_Top_DoInstall,Installing,)
 349         @$(call gb_Top_InstallFinished,Installation,$(INSTALLDIR))
 350
 351 install-strip:
 352         @$(call gb_Top_DoInstall,Installing and stripping binaries,--strip)
 353         @$(call gb_Top_InstallFinished,Installation,$(INSTALLDIR))
 354 endif # !MACOSX
 355
 356 test-install: build
 357         @rm -rf $(TESTINSTALLDIR)
 358         @mkdir -p $(TESTINSTALLDIR)
 359 ifeq ($(OS_FOR_BUILD),WNT)
 360         cd $(SRCDIR)/instsetoo_native && $(MAKE) LIBO_TEST_INSTALL=TRUE $(GMAKE_OPTIONS)
 361 else
 362         @WITH_LANG_LIST="$(WITH_LANG_LIST)" $(SRCDIR)/solenv/bin/ooinstall $(TESTINSTALLDIR)
 363 ifeq ($(OS),MACOSX)
 364 #
 365 # Create Resources/*.lproj directories for languages supported by macOS
 366         set -x; for lang in ca cs da de el en es fi fr hr hu id it ja ko ms nl no pl pt pt_PT ro ru sk sv th tr uk vi zh_CN zh_TW; do \
 367                 lproj=$(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Resources/$$lang.lproj; \
 368                 mkdir "$$lproj"; \
 369         done
 370 #
 371 # Remove unnecessary executables in the LibreOfficePython framework
 372         rm -rf $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Frameworks/LibreOfficePython.framework/Versions/[1-9]*/bin
 373 #
 374 # Remove the python.o object file which is weird and interferes with app store uploading
 375 # And with it removed, presumably the other stuff in the Python lib/python3.3/config-3.3m probably does not make sense either.
 376         rm -rf $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/Frameworks/LibreOfficePython.framework/Versions/[1-9]*/lib/python[1-9]*/config-[1-9]*
 377 #
 378 ifneq ($(ENABLE_MACOSX_SANDBOX),)
 379
 380 # Remove the gengal binary that we hardly need and the shell scripts
 381 # for which code signatures (stored as extended attributes) won't
 382 # survive upload to the App Store anyway. See
 383 # https://developer.apple.com/library/content/documentation/Security/Conceptual/CodeSigningGuide/Procedures/Procedures.html#//apple_ref/doc/uid/TP40005929-CH4-TNTAG201
 384 # We could put the shell scripts somewhere in Resources instead, but
 385 # no 3rd-party code that would be interested in them would look there
 386 # anyway.
 387         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/gengal
 388         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/unopkg
 389         rm $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/MacOS/unoinfo
 390 endif
 391 ifneq ($(MACOSX_PROVISIONING_PROFILE),)
 392         cp "$(MACOSX_PROVISIONING_PROFILE)" $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app/Contents/embedded.provisionprofile
 393 endif
 394 ifneq ($(MACOSX_CODESIGNING_IDENTITY),)
 395 # Then use the macosx-codesign-app-bundle script
 396         @$(SRCDIR)/solenv/bin/macosx-codesign-app-bundle $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app
 397 endif
 398 endif
 399 endif
 400         @$(call gb_Top_InstallFinished,Test Installation,$(TESTINSTALLDIR))
 401
 402 # target to bypass the packaging steps/to only assemble the package
 403 mac-app-store-package.prepare: $(BUILDDIR)/$(PLATFORMID)/done
 404
 405 # shorthand target to build a complete package for the currently building architecture
 406 mac-app-store-package: mac-app-store-package.$(PLATFORMID)
 407
 408 # recipe/targets to do the actual packaging
 409 # the symbolication switch to productbuild unfortunately is undocumented, but that is what XCode
 410 # uses when it creates a package with symbols for uploading to the appstore
 411 mac-app-store-package.$(PLATFORMID) mac-app-store-package.universal: mac-app-store-package.%: $(BUILDDIR)/%/done
 412 ifneq ($(MACOSX_PACKAGE_SIGNING_IDENTITY),)
 413         $(SRCDIR)/solenv/bin/macosx-codesign-app-bundle $*/"$(PRODUCTNAME)".app
 414         productbuild $(if $(ENABLE_SYMBOLS_FOR),--symbolication $*/Symbols) --component $*/"$(PRODUCTNAME)".app /Applications --sign $(MACOSX_PACKAGE_SIGNING_IDENTITY) $(PRODUCTNAME_WITHOUT_SPACES).pkg
 415 else
 416         @echo You did not provide an installer signing identity with --enable-macosx-package-signing
 417         @exit 1
 418 endif
 419
 420 # the builds need to persist a standard "make clean" to be able to combine them into a universal
 421 # binary, so provide an additional target that can be used standalone or via make distclean
 422 mac-app-store-package.clean:
 423         rm -rf \
 424             $(BUILDDIR)/macosx_x86_64 \
 425             $(BUILDDIR)/macosx_aarch64 \
 426             $(BUILDDIR)/universal \
 427             $(BUILDDIR)/$(PRODUCTNAME_WITHOUT_SPACES).pkg
 428
 429 # used by the mac-app-store targets
 430 $(BUILDDIR)/$(PLATFORMID)/done: test-install
 431         rm -rf   $(PLATFORMID)
 432         mkdir -p $(PLATFORMID)/Symbols
 433         mv $(TESTINSTALLDIR)/$(PRODUCTNAME_WITHOUT_SPACES).app $(PLATFORMID)/"$(PRODUCTNAME)".app
 434 ifneq ($(ENABLE_SYMBOLS_FOR),)
 435         symbols -arch all -symbolsPackageDir $(PLATFORMID)/Symbols $(PLATFORMID)/"$(PRODUCTNAME)".app/Contents/Frameworks/[^L]* $(PLATFORMID)/"$(PRODUCTNAME)".app/Contents/MacOS/*
 436         strip -S                                                   $(PLATFORMID)/"$(PRODUCTNAME)".app/Contents/Frameworks/[^L]* $(PLATFORMID)/"$(PRODUCTNAME)".app/Contents/MacOS/*
 437 endif
 438         touch $@
 439
 440 # build one arch using the mac-app-store-package.prepare target, make clean and change the autogen.input
 441 # to build for the other target, then use mac-app-store-package.universal to build for the other arch and
 442 # combine the two into a universal binary
 443 $(BUILDDIR)/universal/done: $(BUILDDIR)/macosx_x86_64/done $(BUILDDIR)/macosx_aarch64/done
 444         rm -rf universal
 445         mkdir -p universal/Symbols
 446 ifneq ($(ENABLE_SYMBOLS_FOR),)
 447         cp -a macosx_x86_64/Symbols/* macosx_aarch64/Symbols/* universal/Symbols/
 448 endif
 449         $(SRCDIR)/bin/merge-app-bundles macosx_x86_64/"$(PRODUCTNAME)".app macosx_aarch64/"$(PRODUCTNAME)".app universal/"$(PRODUCTNAME)".app
 450         touch $@
 451
 452 distro-pack-install: install
 453         WITH_LANG_LIST="$(WITH_LANG_LIST)" WITH_POOR_HELP_LOCALIZATIONS="$(WITH_POOR_HELP_LOCALIZATIONS)" $(SRCDIR)/bin/distro-install-clean-up
 454         $(SRCDIR)/bin/distro-install-desktop-integration
 455         $(SRCDIR)/bin/distro-install-sdk
 456         WITH_LANG_LIST="$(WITH_LANG_LIST)" $(SRCDIR)/bin/distro-install-file-lists
 457
 458 install-package-%:
 459         $(MAKE) $(GMAKE_OPTIONS) -f $(SRCDIR)/Makefile.gbuild $@
 460
 461 id:
 462         @$(SRCDIR)/solenv/bin/create-ids
 463
 464 tags:
 465         @$(SRCDIR)/solenv/bin/create-tags
 466
 467 etags:
 468         @$(SRCDIR)/solenv/bin/create-tags -e
 469
 470 docs:
 471         @$(SRCDIR)/solenv/bin/mkdocs.sh $(SRCDIR)/docs $(SRCDIR)/solenv/inc/doxygen.cfg
 472
 473 findunusedheaders:
 474         $(SRCDIR)/bin/find-unusedheaders.py
 475
 476 symbols:
 477         rm -fr $(WORKDIR)/symbols/
 478         mkdir -p $(WORKDIR)/symbols/
 479 ifeq ($(OS),WNT)
 480         $(SRCDIR)/bin/symbolstore.py $(WORKDIR)/UnpackedTarball/breakpad/src/tools/windows/dump_syms/Release/dump_syms.exe $(WORKDIR)/symbols/ $(INSTDIR)/program/
 481         $(SRCDIR)/bin/symstore.sh
 482 else
 483         $(SRCDIR)/bin/symbolstore.py $(WORKDIR)/UnpackedTarball/breakpad/src/tools/linux/dump_syms/dump_syms $(WORKDIR)/symbols/ $(INSTDIR)/program/*
 484 endif
 485
 486         cd $(WORKDIR)/symbols/ && zip -r $(WORKDIR)/symbols.zip *
 487
 488 create-mar:
 489         rm -fr $(WORKDIR)/installation/mar/
 490         rm -fr $(WORKDIR)/installation/temp/
 491         mkdir -p $(WORKDIR)/installation/temp/
 492         mkdir -p $(WORKDIR)/installation/mar/
 493         tar -xzf $(WORKDIR)/installation/LibreOfficeDev/archive/install/en-US/LibreOffice* -C $(WORKDIR)/installation/temp/
 494         $(SRCDIR)/bin/update/make_full_update.sh $(WORKDIR)/installation/mar/test.mar $(WORKDIR)/installation/temp/*/
 495
 496 upload-symbols:
 497         $(MAKE) -f $(SRCDIR)/Makefile.gbuild upload-symbols
 498
 499 create-update-info:
 500         $(MAKE) -f $(SRCDIR)/Makefile.gbuild create-update-info
 501
 502 create-partial-info:
 503         $(MAKE) -f $(SRCDIR)/Makefile.gbuild create-partial-info
 504
 505 dump-deps:
 506         @$(SRCDIR)/bin/module-deps.pl $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild
 507
 508 dump-deps-png:
 509         @$(SRCDIR)/bin/module-deps.pl $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild | dot -Tpng -o lo.png
 510
 511 dump-deps-sort:
 512         @$(SRCDIR)/bin/module-deps.pl -t $(if $(verbose),-v) $(MAKE) $(SRCDIR)/Makefile.gbuild
 513
 514 clang-format-check:
 515         @$(SRCDIR)/solenv/clang-format/check-last-commit
 516
 517 define gb_Top_GbuildToIdeIntegration
 518 $(1)-ide-integration: gbuildtojson $(if $(filter MACOSX,$(OS_FOR_BUILD)),python3.allbuild)
 519         cd $(SRCDIR) && \
 520                 $(if $(filter MACOSX,$(OS_FOR_BUILD)),PATH="$(INSTROOT_FOR_BUILD)/Frameworks/LibreOfficePython.framework/Versions/Current/bin:$(PATH)") \
 521                 bin/gbuild-to-ide --ide $(1) --make $(MAKE)
 522
 523 endef
 524
 525 $(foreach ide,\
 526         codelite \
 527         vs \
 528         kdevelop \
 529         vim \
 530         qtcreator \
 531         xcode \
 532         eclipsecdt,\
 533 $(eval $(call gb_Top_GbuildToIdeIntegration,$(ide))))
 534
 535 # vscode integration is based on compile_commands.json, which is generated by vim-ide-integration
 536 # the workspace template created by configure doesn't provide advanced/fine grained targets but
 537 # rather supplies some useful settings and basic examples for run/debug configurations
 538 # this target is provided primarily for consistency with the other ide-integrations
 539 vscode-ide-integration: $(BUILDDIR)/vs-code.code-workspace vim-ide-integration
 540
 541 # ToDo: there probably is a way to have it at least create the compile-commands.json file
 542 # for the vim/vs-code integration without building the registry stuff
 543 Rdb:| fetch
 544 gbuildtojson: Rdb
 545
 546 $(BUILDDIR)/vs-code.code-workspace: $(BUILDDIR)/vs-code.code-workspace.template
 547         @test -e $@ || cp $< $@ && \
 548         cmp -s $@ $< || echo "ATTN: $(@F) differs from $(<F), please check yourself for changes"
 549
 550 endif # MAKE_RESTARTS
 551
 552 # vim: set noet sw=4 ts=4: