toolkit/source/controls/geometrycontrolmodel.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include "toolkit/controls/geometrycontrolmodel.hxx"
  21 #include <com/sun/star/lang/XMultiServiceFactory.hpp>
  22 #include <com/sun/star/beans/PropertyAttribute.hpp>
  23 #include <osl/diagnose.h>
  24 #include <rtl/instance.hxx>
  25 #include <comphelper/property.hxx>
  26 #include <comphelper/sequence.hxx>
  27 #include <toolkit/controls/eventcontainer.hxx>
  28 #include <toolkit/helper/property.hxx>
  29 #include <algorithm>
  30 #include <functional>
  31
  32
  33 #define GCM_PROPERTY_ID_POS_X               1
  34 #define GCM_PROPERTY_ID_POS_Y               2
  35 #define GCM_PROPERTY_ID_WIDTH               3
  36 #define GCM_PROPERTY_ID_HEIGHT              4
  37 #define GCM_PROPERTY_ID_NAME                5
  38 #define GCM_PROPERTY_ID_TABINDEX            6
  39 #define GCM_PROPERTY_ID_STEP                7
  40 #define GCM_PROPERTY_ID_TAG                 8
  41 #define GCM_PROPERTY_ID_RESOURCERESOLVER    9
  42
  43 #define GCM_PROPERTY_POS_X              OUString("PositionX")
  44 #define GCM_PROPERTY_POS_Y              OUString("PositionY")
  45 #define GCM_PROPERTY_WIDTH              OUString("Width")
  46 #define GCM_PROPERTY_HEIGHT             OUString("Height")
  47 #define GCM_PROPERTY_NAME               OUString("Name")
  48 #define GCM_PROPERTY_TABINDEX           OUString("TabIndex")
  49 #define GCM_PROPERTY_STEP               OUString("Step")
  50 #define GCM_PROPERTY_TAG                OUString("Tag")
  51 #define GCM_PROPERTY_RESOURCERESOLVER   OUString("ResourceResolver")
  52
  53 #define DEFAULT_ATTRIBS()       PropertyAttribute::BOUND | PropertyAttribute::TRANSIENT
  54
  55
  56 // namespace toolkit
  57 // {
  58
  59
  60     using namespace ::com::sun::star;
  61     using namespace ::com::sun::star::uno;
  62     using namespace ::com::sun::star::lang;
  63     using namespace ::com::sun::star::beans;
  64     using namespace ::com::sun::star::util;
  65     using namespace ::com::sun::star::container;
  66     using namespace ::comphelper;
  67
  68
  69     //= OGeometryControlModel_Base
  70
  71
  72     OGeometryControlModel_Base::OGeometryControlModel_Base(::com::sun::star::uno::XAggregation* _pAggregateInstance)
  73         :OPropertySetAggregationHelper( m_aBHelper )
  74         ,OPropertyContainer( m_aBHelper )
  75         ,OGCM_Base( m_aMutex )
  76         ,m_nPosX(0)
  77         ,m_nPosY(0)
  78         ,m_nWidth(0)
  79         ,m_nHeight(0)
  80         ,m_nTabIndex(-1)
  81         ,m_nStep(0)
  82         ,m_bCloneable(false)
  83     {
  84         OSL_ENSURE(NULL != _pAggregateInstance, "OGeometryControlModel_Base::OGeometryControlModel_Base: invalid aggregate!");
  85
  86         osl_atomic_increment(&m_refCount);
  87         {
  88             m_xAggregate = _pAggregateInstance;
  89
  90             {   // check if the aggregate is cloneable
  91                 Reference< XCloneable > xCloneAccess(m_xAggregate, UNO_QUERY);
  92                 m_bCloneable = xCloneAccess.is();
  93             }
  94
  95             setAggregation(m_xAggregate);
  96             m_xAggregate->setDelegator(static_cast< XWeak* >(this));
  97         }
  98         osl_atomic_decrement(&m_refCount);
  99
 100         registerProperties();
 101     }
 102
 103
 104     OGeometryControlModel_Base::OGeometryControlModel_Base(Reference< XCloneable >& _rxAggregateInstance)
 105         :OPropertySetAggregationHelper( m_aBHelper )
 106         ,OPropertyContainer( m_aBHelper )
 107         ,OGCM_Base( m_aMutex )
 108         ,m_nPosX(0)
 109         ,m_nPosY(0)
 110         ,m_nWidth(0)
 111         ,m_nHeight(0)
 112         ,m_nTabIndex(-1)
 113         ,m_nStep(0)
 114         ,m_bCloneable(_rxAggregateInstance.is())
 115     {
 116         osl_atomic_increment(&m_refCount);
 117         {
 118             {
 119                 // ensure that the temporary gets destructed NOW
 120                 m_xAggregate = Reference< XAggregation >(_rxAggregateInstance, UNO_QUERY);
 121             }
 122             OSL_ENSURE(m_xAggregate.is(), "OGeometryControlModel_Base::OGeometryControlModel_Base: invalid object given!");
 123
 124             // now the aggregate has a ref count of 2, but before setting the delegator it must be 1
 125             _rxAggregateInstance.clear();
 126             // now it should be the 1 we need here ...
 127
 128             setAggregation(m_xAggregate);
 129             m_xAggregate->setDelegator(static_cast< XWeak* >(this));
 130         }
 131         osl_atomic_decrement(&m_refCount);
 132
 133         registerProperties();
 134     }
 135
 136
 137     Sequence< Type > SAL_CALL OGeometryControlModel_Base::getTypes(  ) throw (RuntimeException, std::exception)
 138     {
 139         // our own types
 140         Sequence< Type > aTypes = ::comphelper::concatSequences(
 141             OPropertySetAggregationHelper::getTypes(),
 142             getBaseTypes(),
 143             OGCM_Base::getTypes()
 144         );
 145
 146         if ( m_xAggregate.is() )
 147         {
 148             // retrieve the types of the aggregate
 149             Reference< XTypeProvider > xAggregateTypeProv;
 150             m_xAggregate->queryAggregation( cppu::UnoType<decltype(xAggregateTypeProv)>::get() ) >>= xAggregateTypeProv;
 151             OSL_ENSURE( xAggregateTypeProv.is(), "OGeometryControlModel_Base::getTypes: aggregate should be a type provider!" );
 152             Sequence< Type > aAggTypes;
 153             if ( xAggregateTypeProv.is() )
 154                 aAggTypes = xAggregateTypeProv->getTypes();
 155
 156             // concat the sequences
 157             sal_Int32 nOldSize = aTypes.getLength();
 158             aTypes.realloc( nOldSize + aAggTypes.getLength() );
 159             ::std::copy(
 160                 aAggTypes.getConstArray(),
 161                 aAggTypes.getConstArray() + aAggTypes.getLength(),
 162                 aTypes.getArray() + nOldSize
 163             );
 164         }
 165
 166         return aTypes;
 167     }
 168
 169
 170     void OGeometryControlModel_Base::registerProperties()
 171     {
 172         // register our members for the property handling of the OPropertyContainer
 173         registerProperty(GCM_PROPERTY_POS_X,    GCM_PROPERTY_ID_POS_X,      DEFAULT_ATTRIBS(), &m_nPosX, cppu::UnoType<decltype(m_nPosX)>::get());
 174         registerProperty(GCM_PROPERTY_POS_Y,    GCM_PROPERTY_ID_POS_Y,      DEFAULT_ATTRIBS(), &m_nPosY, cppu::UnoType<decltype(m_nPosY)>::get());
 175         registerProperty(GCM_PROPERTY_WIDTH,    GCM_PROPERTY_ID_WIDTH,      DEFAULT_ATTRIBS(), &m_nWidth, cppu::UnoType<decltype(m_nWidth)>::get());
 176         registerProperty(GCM_PROPERTY_HEIGHT,   GCM_PROPERTY_ID_HEIGHT,     DEFAULT_ATTRIBS(), &m_nHeight, cppu::UnoType<decltype(m_nHeight)>::get());
 177         registerProperty(GCM_PROPERTY_NAME,     GCM_PROPERTY_ID_NAME,       DEFAULT_ATTRIBS(), &m_aName, cppu::UnoType<decltype(m_aName)>::get());
 178         registerProperty(GCM_PROPERTY_TABINDEX, GCM_PROPERTY_ID_TABINDEX,   DEFAULT_ATTRIBS(), &m_nTabIndex, cppu::UnoType<decltype(m_nTabIndex)>::get());
 179         registerProperty(GCM_PROPERTY_STEP,     GCM_PROPERTY_ID_STEP,       DEFAULT_ATTRIBS(), &m_nStep, cppu::UnoType<decltype(m_nStep)>::get());
 180         registerProperty(GCM_PROPERTY_TAG,      GCM_PROPERTY_ID_TAG,        DEFAULT_ATTRIBS(), &m_aTag, cppu::UnoType<decltype(m_aTag)>::get());
 181         registerProperty(GCM_PROPERTY_RESOURCERESOLVER, GCM_PROPERTY_ID_RESOURCERESOLVER, DEFAULT_ATTRIBS(), &m_xStrResolver, cppu::UnoType<decltype(m_xStrResolver)>::get());
 182     }
 183
 184
 185     ::com::sun::star::uno::Any OGeometryControlModel_Base::ImplGetDefaultValueByHandle(sal_Int32 nHandle)
 186     {
 187         ::com::sun::star::uno::Any aDefault;
 188
 189         switch ( nHandle )
 190         {
 191             case GCM_PROPERTY_ID_POS_X:             aDefault <<= (sal_Int32) 0; break;
 192             case GCM_PROPERTY_ID_POS_Y:             aDefault <<= (sal_Int32) 0; break;
 193             case GCM_PROPERTY_ID_WIDTH:             aDefault <<= (sal_Int32) 0; break;
 194             case GCM_PROPERTY_ID_HEIGHT:            aDefault <<= (sal_Int32) 0; break;
 195             case GCM_PROPERTY_ID_NAME:              aDefault <<= OUString(); break;
 196             case GCM_PROPERTY_ID_TABINDEX:          aDefault <<= (sal_Int16) -1; break;
 197             case GCM_PROPERTY_ID_STEP:              aDefault <<= (sal_Int32) 0; break;
 198             case GCM_PROPERTY_ID_TAG:               aDefault <<= OUString(); break;
 199             case GCM_PROPERTY_ID_RESOURCERESOLVER:  aDefault <<= Reference< resource::XStringResourceResolver >(); break;
 200             default:                            OSL_FAIL( "ImplGetDefaultValueByHandle - unknown Property" );
 201         }
 202
 203         return aDefault;
 204     }
 205
 206
 207     ::com::sun::star::uno::Any OGeometryControlModel_Base::ImplGetPropertyValueByHandle(sal_Int32 nHandle) const
 208     {
 209         ::com::sun::star::uno::Any aValue;
 210
 211         switch ( nHandle )
 212         {
 213             case GCM_PROPERTY_ID_POS_X:         aValue <<= m_nPosX; break;
 214             case GCM_PROPERTY_ID_POS_Y:         aValue <<= m_nPosY; break;
 215             case GCM_PROPERTY_ID_WIDTH:         aValue <<= m_nWidth; break;
 216             case GCM_PROPERTY_ID_HEIGHT:        aValue <<= m_nHeight; break;
 217             case GCM_PROPERTY_ID_NAME:          aValue <<= m_aName; break;
 218             case GCM_PROPERTY_ID_TABINDEX:      aValue <<= m_nTabIndex; break;
 219             case GCM_PROPERTY_ID_STEP:          aValue <<= m_nStep; break;
 220             case GCM_PROPERTY_ID_TAG:           aValue <<= m_aTag; break;
 221             case GCM_PROPERTY_ID_RESOURCERESOLVER: aValue <<= m_xStrResolver; break;
 222             default:                            OSL_FAIL( "ImplGetPropertyValueByHandle - unknown Property" );
 223         }
 224
 225         return aValue;
 226     }
 227
 228
 229     void OGeometryControlModel_Base::ImplSetPropertyValueByHandle(sal_Int32 nHandle, const :: com::sun::star::uno::Any& aValue)
 230     {
 231         switch ( nHandle )
 232         {
 233             case GCM_PROPERTY_ID_POS_X:         aValue >>= m_nPosX; break;
 234             case GCM_PROPERTY_ID_POS_Y:         aValue >>= m_nPosY; break;
 235             case GCM_PROPERTY_ID_WIDTH:         aValue >>= m_nWidth; break;
 236             case GCM_PROPERTY_ID_HEIGHT:        aValue >>= m_nHeight; break;
 237             case GCM_PROPERTY_ID_NAME:          aValue >>= m_aName; break;
 238             case GCM_PROPERTY_ID_TABINDEX:      aValue >>= m_nTabIndex; break;
 239             case GCM_PROPERTY_ID_STEP:          aValue >>= m_nStep; break;
 240             case GCM_PROPERTY_ID_TAG:           aValue >>= m_aTag; break;
 241             case GCM_PROPERTY_ID_RESOURCERESOLVER: aValue >>= m_xStrResolver; break;
 242             default:                            OSL_FAIL( "ImplSetPropertyValueByHandle - unknown Property" );
 243         }
 244     }
 245
 246
 247     Any SAL_CALL OGeometryControlModel_Base::queryAggregation( const Type& _rType ) throw(RuntimeException, std::exception)
 248     {
 249         Any aReturn;
 250         if (_rType.equals(cppu::UnoType<XCloneable>::get()) && !m_bCloneable)
 251             // somebody is asking for the XCloneable interface, but our aggregate does not support it
 252             // -> outta here
 253             // (need this extra check, cause OGCM_Base::queryAggregation would return this interface
 254             // in every case)
 255             return aReturn;
 256
 257         aReturn = OGCM_Base::queryAggregation(_rType);
 258             // the basic interfaces (XInterface, XAggregation etc)
 259
 260         if (!aReturn.hasValue())
 261             aReturn = OPropertySetAggregationHelper::queryInterface(_rType);
 262             // the property set related interfaces
 263
 264         if (!aReturn.hasValue() && m_xAggregate.is())
 265             aReturn = m_xAggregate->queryAggregation(_rType);
 266             // the interfaces our aggregate can provide
 267
 268         return aReturn;
 269     }
 270
 271
 272     Any SAL_CALL OGeometryControlModel_Base::queryInterface( const Type& _rType ) throw(RuntimeException, std::exception)
 273     {
 274         return OGCM_Base::queryInterface(_rType);
 275     }
 276
 277
 278     void SAL_CALL OGeometryControlModel_Base::acquire(  ) throw()
 279     {
 280         OGCM_Base::acquire();
 281     }
 282
 283
 284     void SAL_CALL OGeometryControlModel_Base::release(  ) throw()
 285     {
 286         OGCM_Base::release();
 287     }
 288
 289
 290     void OGeometryControlModel_Base::releaseAggregation()
 291     {
 292         // release the aggregate (_before_ clearing m_xAggregate)
 293         if (m_xAggregate.is())
 294             m_xAggregate->setDelegator(NULL);
 295         setAggregation(NULL);
 296     }
 297
 298
 299     OGeometryControlModel_Base::~OGeometryControlModel_Base()
 300     {
 301         releaseAggregation();
 302     }
 303
 304
 305     sal_Bool SAL_CALL OGeometryControlModel_Base::convertFastPropertyValue(Any& _rConvertedValue, Any& _rOldValue,
 306             sal_Int32 _nHandle, const Any& _rValue) throw (IllegalArgumentException)
 307     {
 308         return OPropertyContainer::convertFastPropertyValue(_rConvertedValue, _rOldValue, _nHandle, _rValue);
 309     }
 310
 311
 312     void SAL_CALL OGeometryControlModel_Base::setFastPropertyValue_NoBroadcast(sal_Int32 _nHandle, const Any& _rValue) throw (Exception, std::exception)
 313     {
 314         OPropertyContainer::setFastPropertyValue_NoBroadcast(_nHandle, _rValue);
 315     }
 316
 317
 318     void SAL_CALL OGeometryControlModel_Base::getFastPropertyValue(Any& _rValue, sal_Int32 _nHandle) const
 319     {
 320         OPropertyArrayAggregationHelper& rPH = static_cast<OPropertyArrayAggregationHelper&>(const_cast<OGeometryControlModel_Base*>(this)->getInfoHelper());
 321         OUString sPropName;
 322         sal_Int32   nOriginalHandle = -1;
 323
 324         if (rPH.fillAggregatePropertyInfoByHandle(&sPropName, &nOriginalHandle, _nHandle))
 325             OPropertySetAggregationHelper::getFastPropertyValue(_rValue, _nHandle);
 326         else
 327             OPropertyContainer::getFastPropertyValue(_rValue, _nHandle);
 328     }
 329
 330
 331     ::com::sun::star::beans::PropertyState OGeometryControlModel_Base::getPropertyStateByHandle(sal_Int32 nHandle)
 332     {
 333         ::com::sun::star::uno::Any aValue = ImplGetPropertyValueByHandle( nHandle );
 334         ::com::sun::star::uno::Any aDefault = ImplGetDefaultValueByHandle( nHandle );
 335
 336         return CompareProperties( aValue, aDefault ) ? ::com::sun::star::beans::PropertyState_DEFAULT_VALUE : ::com::sun::star::beans::PropertyState_DIRECT_VALUE;
 337     }
 338
 339
 340     void OGeometryControlModel_Base::setPropertyToDefaultByHandle(sal_Int32 nHandle)
 341     {
 342         ImplSetPropertyValueByHandle( nHandle , ImplGetDefaultValueByHandle( nHandle ) );
 343     }
 344
 345
 346     ::com::sun::star::uno::Any OGeometryControlModel_Base::getPropertyDefaultByHandle( sal_Int32 nHandle ) const
 347     {
 348         return ImplGetDefaultValueByHandle( nHandle );
 349     }
 350
 351
 352     Reference< XPropertySetInfo> SAL_CALL OGeometryControlModel_Base::getPropertySetInfo() throw(RuntimeException, std::exception)
 353     {
 354         return OPropertySetAggregationHelper::createPropertySetInfo(getInfoHelper());
 355     }
 356
 357
 358     Reference< XCloneable > SAL_CALL OGeometryControlModel_Base::createClone(  ) throw(RuntimeException, std::exception)
 359     {
 360         OSL_ENSURE(m_bCloneable, "OGeometryControlModel_Base::createClone: invalid call!");
 361         if (!m_bCloneable)
 362             return Reference< XCloneable >();
 363
 364         // let the aggregate create it's own clone
 365         // the interface
 366         Reference< XCloneable > xCloneAccess;
 367         m_xAggregate->queryAggregation(cppu::UnoType<decltype(xCloneAccess)>::get()) >>= xCloneAccess;
 368         OSL_ENSURE(xCloneAccess.is(), "OGeometryControlModel_Base::createClone: suspicious aggregate!");
 369         if (!xCloneAccess.is())
 370             return Reference< XCloneable >();
 371         // the aggregate's clone
 372         Reference< XCloneable > xAggregateClone = xCloneAccess->createClone();
 373         OSL_ENSURE(xAggregateClone.is(), "OGeometryControlModel_Base::createClone: suspicious return of the aggregate!");
 374
 375         // create a new wrapper aggregating this return value
 376         OGeometryControlModel_Base* pOwnClone = createClone_Impl(xAggregateClone);
 377         OSL_ENSURE(pOwnClone, "OGeometryControlModel_Base::createClone: invalid derivee behaviour!");
 378         OSL_ENSURE(!xAggregateClone.is(), "OGeometryControlModel_Base::createClone: invalid ctor behaviour!");
 379             // should have been reset
 380
 381         // set properties
 382         pOwnClone->m_nPosX      = m_nPosX;
 383         pOwnClone->m_nPosY      = m_nPosY;
 384         pOwnClone->m_nWidth     = m_nWidth;
 385         pOwnClone->m_nHeight    = m_nHeight;
 386         pOwnClone->m_aName      = m_aName;
 387         pOwnClone->m_nTabIndex  = m_nTabIndex;
 388         pOwnClone->m_nStep      = m_nStep;
 389         pOwnClone->m_aTag       = m_aTag;
 390
 391
 392         // Clone event container
 393         Reference< ::com::sun::star::script::XScriptEventsSupplier > xEventsSupplier =
 394             static_cast< ::com::sun::star::script::XScriptEventsSupplier* >( this );
 395         Reference< ::com::sun::star::script::XScriptEventsSupplier > xCloneEventsSupplier =
 396             static_cast< ::com::sun::star::script::XScriptEventsSupplier* >( pOwnClone );
 397
 398         if( xEventsSupplier.is() && xCloneEventsSupplier.is() )
 399         {
 400             Reference< XNameContainer > xEventCont = xEventsSupplier->getEvents();
 401             Reference< XNameContainer > xCloneEventCont = xCloneEventsSupplier->getEvents();
 402
 403             ::com::sun::star::uno::Sequence< OUString > aNames =
 404                 xEventCont->getElementNames();
 405             const OUString* pNames = aNames.getConstArray();
 406             sal_Int32 i, nNameCount = aNames.getLength();
 407
 408             for( i = 0 ; i < nNameCount ; i++ )
 409             {
 410                 OUString aName = pNames[ i ];
 411                 ::com::sun::star::uno::Any aElement = xEventCont->getByName( aName );
 412                 xCloneEventCont->insertByName( aName, aElement );
 413             }
 414         }
 415
 416         return pOwnClone;
 417     }
 418
 419
 420     Reference< XNameContainer > SAL_CALL OGeometryControlModel_Base::getEvents() throw(RuntimeException, std::exception)
 421     {
 422         if( !mxEventContainer.is() )
 423             mxEventContainer = (XNameContainer*)new toolkit::ScriptEventContainer();
 424         return mxEventContainer;
 425     }
 426
 427
 428     void SAL_CALL OGeometryControlModel_Base::disposing()
 429     {
 430         OGCM_Base::disposing();
 431         OPropertySetAggregationHelper::disposing();
 432
 433         Reference<XComponent>  xComp;
 434         if ( query_aggregation( m_xAggregate, xComp ) )
 435             xComp->dispose();
 436     }
 437
 438
 439     //= OCommonGeometryControlModel
 440
 441
 442
 443     typedef std::unordered_map< OUString, sal_Int32, OUStringHash > HashMapString2Int;
 444     typedef std::vector< ::com::sun::star::uno::Sequence< ::com::sun::star::beans::Property > >   PropSeqArray;
 445     typedef std::vector< ::std::vector< sal_Int32 > > IntArrayArray;
 446
 447     // for creating class-unique PropertySetInfo's, we need some info:
 448     namespace { struct ServiceSpecifierMap : public rtl::Static< HashMapString2Int, ServiceSpecifierMap > {}; }
 449     // this one maps from a String, which is the service specifier for our
 450     // aggregate, to a unique id
 451
 452     namespace { struct AggregateProperties : public rtl::Static< PropSeqArray, AggregateProperties > {}; }
 453     // this one contains the properties which belong to all the unique ids
 454     // in ServiceSpecifierMap
 455
 456     namespace { struct AmbiguousPropertyIds : public rtl::Static< IntArrayArray, AmbiguousPropertyIds > {}; }
 457     // the ids of the properties which we as well as our aggregate supply
 458     // For such props, we let our base class handle them, and whenever such
 459     // a prop is set, we forward this to our aggregate.
 460
 461     // With this, we can ensure that two instances of this class share the
 462     // same PropertySetInfo if and only if both aggregates have the same
 463     // service specifier.
 464
 465
 466
 467     OCommonGeometryControlModel::OCommonGeometryControlModel( Reference< XCloneable >& _rxAgg, const OUString& _rServiceSpecifier )
 468         :OGeometryControlModel_Base( _rxAgg )
 469         ,m_sServiceSpecifier( _rServiceSpecifier )
 470         ,m_nPropertyMapId( 0 )
 471     {
 472         Reference< XPropertySetInfo > xPI;
 473         if ( m_xAggregateSet.is() )
 474             xPI = m_xAggregateSet->getPropertySetInfo();
 475         if ( !xPI.is() )
 476         {
 477             releaseAggregation();
 478             throw IllegalArgumentException();
 479         }
 480
 481             HashMapString2Int &rMap = ServiceSpecifierMap::get();
 482         HashMapString2Int::iterator aPropMapIdPos = rMap.find( m_sServiceSpecifier );
 483         if ( rMap.end() == aPropMapIdPos )
 484         {
 485             PropSeqArray &rAggProperties = AggregateProperties::get();
 486             m_nPropertyMapId = rAggProperties.size();
 487             rAggProperties.push_back( xPI->getProperties() );
 488             AmbiguousPropertyIds::get().push_back( IntArrayArray::value_type() );
 489
 490             rMap[ m_sServiceSpecifier ] = m_nPropertyMapId;
 491         }
 492         else
 493             m_nPropertyMapId = aPropMapIdPos->second;
 494     }
 495
 496
 497     struct PropertyNameLess : public ::std::binary_function< Property, Property, bool >
 498     {
 499         bool operator()( const Property& _rLHS, const Property& _rRHS )
 500         {
 501             return _rLHS.Name < _rRHS.Name;
 502         }
 503     };
 504
 505
 506     struct PropertyNameEqual : public ::std::unary_function< Property, bool >
 507     {
 508         const OUString&  m_rCompare;
 509         PropertyNameEqual( const OUString& _rCompare ) : m_rCompare( _rCompare ) { }
 510
 511         bool operator()( const Property& _rLHS )
 512         {
 513             return _rLHS.Name == m_rCompare;
 514         }
 515     };
 516
 517
 518     ::cppu::IPropertyArrayHelper* OCommonGeometryControlModel::createArrayHelper( sal_Int32 _nId ) const
 519     {
 520         OSL_ENSURE( _nId == m_nPropertyMapId, "OCommonGeometryControlModel::createArrayHelper: invalid argument!" );
 521         OSL_ENSURE( _nId < (sal_Int32)AggregateProperties::get().size(), "OCommonGeometryControlModel::createArrayHelper: invalid status info (1)!" );
 522         OSL_ENSURE( _nId < (sal_Int32)AmbiguousPropertyIds::get().size(), "OCommonGeometryControlModel::createArrayHelper: invalid status info (2)!" );
 523
 524         // our own properties
 525         Sequence< Property > aProps;
 526         OPropertyContainer::describeProperties( aProps );
 527
 528         // the aggregate properties
 529         Sequence< Property > aAggregateProps;
 530         aAggregateProps = AggregateProperties::get()[ _nId ];
 531
 532         // look for duplicates, and remember them
 533         IntArrayArray::value_type& rDuplicateIds = AmbiguousPropertyIds::get()[ _nId ];
 534         // for this, sort the aggregate properties
 535         ::std::sort(
 536             aAggregateProps.getArray(),
 537             aAggregateProps.getArray() + aAggregateProps.getLength(),
 538             PropertyNameLess()
 539         );
 540         const Property* pAggProps = aAggregateProps.getConstArray();
 541         const Property* pAggPropsEnd = aAggregateProps.getConstArray() + aAggregateProps.getLength();
 542
 543         // now loop through our own props
 544         const Property* pProp = aProps.getConstArray();
 545         const Property* pPropEnd = aProps.getConstArray() + aProps.getLength();
 546         while ( pProp < pPropEnd )
 547         {
 548             // look for the current property in the properties of our aggregate
 549             const Property* pAggPropPos = ::std::find_if( pAggProps, pAggPropsEnd, PropertyNameEqual( pProp->Name ) );
 550             if ( pAggPropPos != pAggPropsEnd )
 551             {   // found a duplicate
 552                 // -> remove from the aggregate property sequence
 553                 ::comphelper::removeElementAt( aAggregateProps, pAggPropPos - pAggProps );
 554                 // which means we have to adjust the pointers
 555                 pAggProps = aAggregateProps.getConstArray(),
 556                 pAggPropsEnd = aAggregateProps.getConstArray() + aAggregateProps.getLength(),
 557
 558                 // and additionally, remember the id of this property
 559                 rDuplicateIds.push_back( pProp->Handle );
 560             }
 561
 562             ++pProp;
 563         }
 564
 565         // now, finally, sort the duplicates
 566         ::std::sort( rDuplicateIds.begin(), rDuplicateIds.end(), ::std::less< sal_Int32 >() );
 567
 568         return new OPropertyArrayAggregationHelper(aProps, aAggregateProps);
 569     }
 570
 571
 572     ::cppu::IPropertyArrayHelper& SAL_CALL OCommonGeometryControlModel::getInfoHelper()
 573     {
 574         return *getArrayHelper( m_nPropertyMapId );
 575     }
 576
 577
 578     OGeometryControlModel_Base* OCommonGeometryControlModel::createClone_Impl( Reference< XCloneable >& _rxAggregateInstance )
 579     {
 580         return new OCommonGeometryControlModel( _rxAggregateInstance, m_sServiceSpecifier );
 581     }
 582
 583     Sequence< sal_Int8 > SAL_CALL OCommonGeometryControlModel::getImplementationId(  ) throw (RuntimeException, std::exception)
 584     {
 585         return css::uno::Sequence<sal_Int8>();
 586     }
 587
 588
 589     struct Int32Equal : public ::std::unary_function< sal_Int32, bool >
 590     {
 591         sal_Int32   m_nCompare;
 592         Int32Equal( sal_Int32 _nCompare ) : m_nCompare( _nCompare ) { }
 593
 594         bool operator()( sal_Int32 _nLHS )
 595         {
 596             return _nLHS == m_nCompare;
 597         }
 598     };
 599
 600
 601     void SAL_CALL OCommonGeometryControlModel::setFastPropertyValue_NoBroadcast( sal_Int32 _nHandle, const Any& _rValue ) throw ( Exception, std::exception )
 602     {
 603         OGeometryControlModel_Base::setFastPropertyValue_NoBroadcast( _nHandle, _rValue );
 604
 605         // look if this id is one we recognized as duplicate
 606         IntArrayArray::value_type& rDuplicateIds = AmbiguousPropertyIds::get()[ m_nPropertyMapId ];
 607
 608         IntArrayArray::value_type::const_iterator aPos = ::std::find_if(
 609             rDuplicateIds.begin(),
 610             rDuplicateIds.end(),
 611             Int32Equal( _nHandle )
 612         );
 613
 614         if ( rDuplicateIds.end() != aPos )
 615         {
 616             // yes, it is such a property
 617             OUString sPropName;
 618             sal_Int16 nAttributes(0);
 619             static_cast< OPropertyArrayAggregationHelper* >( getArrayHelper( m_nPropertyMapId ) )->fillPropertyMembersByHandle( &sPropName, &nAttributes, _nHandle );
 620
 621             if ( m_xAggregateSet.is() && !sPropName.isEmpty() )
 622                 m_xAggregateSet->setPropertyValue( sPropName, _rValue );
 623         }
 624     }
 625
 626
 627 // }    // namespace toolkit
 628
 629
 630 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */