sc/source/filter/oox/unitconverter.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include "unitconverter.hxx"
  21
  22 #include <com/sun/star/awt/DeviceInfo.hpp>
  23 #include <com/sun/star/awt/FontDescriptor.hpp>
  24 #include <com/sun/star/awt/XDevice.hpp>
  25 #include <com/sun/star/awt/XFont.hpp>
  26 #include <com/sun/star/util/Date.hpp>
  27 #include <com/sun/star/util/DateTime.hpp>
  28 #include <osl/diagnose.h>
  29 #include <rtl/math.hxx>
  30 #include <oox/core/filterbase.hxx>
  31 #include <oox/helper/propertyset.hxx>
  32 #include <oox/token/properties.hxx>
  33 #include "stylesbuffer.hxx"
  34
  35 namespace oox {
  36 namespace xls {
  37
  38 using namespace ::com::sun::star;
  39 using namespace ::com::sun::star::awt;
  40 using namespace ::com::sun::star::uno;
  41
  42 namespace {
  43
  44 const double MM100_PER_INCH         = 2540.0;
  45 const double MM100_PER_POINT        = MM100_PER_INCH / 72.0;
  46 const double MM100_PER_TWIP         = MM100_PER_POINT / 20.0;
  47 const double MM100_PER_EMU          = 1.0 / 360.0;
  48
  49 /** Returns true, if the passed year is a leap year. */
  50 inline bool lclIsLeapYear( sal_Int32 nYear )
  51 {
  52     return ((nYear % 4) == 0) && (((nYear % 100) != 0) || ((nYear % 400) == 0));
  53 }
  54
  55 void lclSkipYearBlock( sal_Int32& ornDays, sal_Int16& ornYear, sal_Int32 nDaysInBlock, sal_Int32 nYearsPerBlock, sal_Int32 nMaxBlocks )
  56 {
  57     sal_Int32 nBlocks = ::std::min< sal_Int32 >( ornDays / nDaysInBlock, nMaxBlocks );
  58     ornYear = static_cast< sal_Int16 >( ornYear + nYearsPerBlock * nBlocks );
  59     ornDays -= nBlocks * nDaysInBlock;
  60 }
  61
  62 /** Returns the number of days before the passed date, starting from the null
  63     date 0000-Jan-01, using standard leap year conventions. */
  64 sal_Int32 lclGetDays( const util::Date& rDate )
  65 {
  66     // number of days in all full years before passed date including all leap days
  67     sal_Int32 nDays = rDate.Year * 365 + ((rDate.Year + 3) / 4) - ((rDate.Year + 99) / 100) + ((rDate.Year + 399) / 400);
  68     OSL_ENSURE( (1 <= rDate.Month) && (rDate.Month <= 12), "lclGetDays - invalid month" );
  69     OSL_ENSURE( (1 <= rDate.Day) && (rDate.Day <= 31), "lclGetDays - invalid day" );    // yes, this is weak...
  70     if( (1 <= rDate.Month) && (rDate.Month <= 12) )
  71     {
  72         // number of days at start of month   jan feb mar apr  may  jun  jul  aug  sep  oct  nov  dec
  73         static const sal_Int32 spnCumDays[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
  74         // add number of days in full months before passed date
  75         nDays += spnCumDays[ rDate.Month - 1 ];
  76         // add number of days from passed date (this adds one day too much)
  77         nDays += rDate.Day;
  78         /*  Remove the one day added too much if there is no leap day before
  79             the passed day in the passed year. This means: remove the day, if
  80             we are in january or february (leap day not reached if existing),
  81             or if the passed year is not a leap year. */
  82         if( (rDate.Month < 3) || !lclIsLeapYear( rDate.Year ) )
  83             --nDays;
  84     }
  85     return nDays;
  86 }
  87
  88 } // namespace
  89
  90 UnitConverter::UnitConverter( const WorkbookHelper& rHelper ) :
  91     WorkbookHelper( rHelper ),
  92     maCoeffs( UNIT_ENUM_SIZE, 1.0 ),
  93     mnNullDate( lclGetDays( util::Date( 30, 12, 1899 ) ) )
  94 {
  95     // initialize constant and default coefficients
  96     const DeviceInfo& rDeviceInfo = getBaseFilter().getGraphicHelper().getDeviceInfo();
  97     maCoeffs[ UNIT_INCH ]    = MM100_PER_INCH;
  98     maCoeffs[ UNIT_POINT ]   = MM100_PER_POINT;
  99     maCoeffs[ UNIT_TWIP ]    = MM100_PER_TWIP;
 100     maCoeffs[ UNIT_EMU ]     = MM100_PER_EMU;
 101     maCoeffs[ UNIT_SCREENX ] = (rDeviceInfo.PixelPerMeterX > 0) ? (100000.0 / rDeviceInfo.PixelPerMeterX) : 50.0;
 102     maCoeffs[ UNIT_SCREENY ] = (rDeviceInfo.PixelPerMeterY > 0) ? (100000.0 / rDeviceInfo.PixelPerMeterY) : 50.0;
 103     maCoeffs[ UNIT_REFDEVX ] = 12.5;                 // default: 1 px = 0.125 mm
 104     maCoeffs[ UNIT_REFDEVY ] = 12.5;                 // default: 1 px = 0.125 mm
 105     maCoeffs[ UNIT_DIGIT ]   = 200.0;                // default: 1 digit = 2 mm
 106     maCoeffs[ UNIT_SPACE ]   = 100.0;                // default  1 space = 1 mm
 107
 108     // error code maps
 109     addErrorCode( BIFF_ERR_NULL,  "#NULL!" );
 110     addErrorCode( BIFF_ERR_DIV0,  "#DIV/0!" );
 111     addErrorCode( BIFF_ERR_VALUE, "#VALUE!" );
 112     addErrorCode( BIFF_ERR_REF,   "#REF!" );
 113     addErrorCode( BIFF_ERR_NAME,  "#NAME?" );
 114     addErrorCode( BIFF_ERR_NUM,   "#NUM!" );
 115     addErrorCode( BIFF_ERR_NA,    "#N/A" );
 116 }
 117
 118 void UnitConverter::finalizeImport()
 119 {
 120     PropertySet aDocProps( getDocument() );
 121     Reference< XDevice > xDevice( aDocProps.getAnyProperty( PROP_ReferenceDevice ), UNO_QUERY );
 122     if( xDevice.is() )
 123     {
 124         // get reference device metric first, needed to get character widths below
 125         DeviceInfo aInfo = xDevice->getInfo();
 126         maCoeffs[ UNIT_REFDEVX ] = 100000.0 / aInfo.PixelPerMeterX;
 127         maCoeffs[ UNIT_REFDEVY ] = 100000.0 / aInfo.PixelPerMeterY;
 128
 129         // get character widths from default font
 130         if( const oox::xls::Font* pDefFont = getStyles().getDefaultFont().get() )
 131         {
 132             // XDevice expects pixels in font descriptor, but font contains twips
 133             FontDescriptor aDesc = pDefFont->getFontDescriptor();
 134             Reference< XFont > xFont = xDevice->getFont( aDesc );
 135             if( xFont.is() )
 136             {
 137                 // get maximum width of all digits
 138                 sal_Int32 nDigitWidth = 0;
 139                 for( sal_Unicode cChar = '0'; cChar <= '9'; ++cChar )
 140                     nDigitWidth = ::std::max( nDigitWidth, scaleToMm100( xFont->getCharWidth( cChar ), UNIT_TWIP ) );
 141                 if( nDigitWidth > 0 )
 142                     maCoeffs[ UNIT_DIGIT ] = nDigitWidth;
 143                 // get width of space character
 144                 sal_Int32 nSpaceWidth = scaleToMm100( xFont->getCharWidth( ' ' ), UNIT_TWIP );
 145                 if( nSpaceWidth > 0 )
 146                     maCoeffs[ UNIT_SPACE ] = nSpaceWidth;
 147             }
 148         }
 149     }
 150 }
 151
 152 void UnitConverter::finalizeNullDate( const util::Date& rNullDate )
 153 {
 154     // convert the nulldate to number of days since 0000-Jan-01
 155     mnNullDate = lclGetDays( rNullDate );
 156 }
 157
 158 // conversion -----------------------------------------------------------------
 159
 160 double UnitConverter::scaleValue( double fValue, Unit eFromUnit, Unit eToUnit ) const
 161 {
 162     return (eFromUnit == eToUnit) ? fValue : (fValue * getCoefficient( eFromUnit ) / getCoefficient( eToUnit ));
 163 }
 164
 165 sal_Int32 UnitConverter::scaleToMm100( double fValue, Unit eUnit ) const
 166 {
 167     return static_cast< sal_Int32 >( fValue * getCoefficient( eUnit ) + 0.5 );
 168 }
 169
 170 double UnitConverter::scaleFromMm100( sal_Int32 nMm100, Unit eUnit ) const
 171 {
 172     return static_cast< double >( nMm100 ) / getCoefficient( eUnit );
 173 }
 174
 175 double UnitConverter::calcSerialFromDateTime( const util::DateTime& rDateTime ) const
 176 {
 177     sal_Int32 nDays = lclGetDays( util::Date( rDateTime.Day, rDateTime.Month, rDateTime.Year ) ) - mnNullDate;
 178     OSL_ENSURE( nDays >= 0, "UnitConverter::calcDateTimeSerial - invalid date" );
 179     OSL_ENSURE( (rDateTime.Hours <= 23) && (rDateTime.Minutes <= 59) && (rDateTime.Seconds <= 59), "UnitConverter::calcDateTimeSerial - invalid time" );
 180     return nDays + rDateTime.Hours / 24.0 + rDateTime.Minutes / 1440.0 + rDateTime.Seconds / 86400.0;
 181 }
 182
 183 util::DateTime UnitConverter::calcDateTimeFromSerial( double fSerial ) const
 184 {
 185     util::DateTime aDateTime( 0, 0, 0, 0, 1, 1, 0, false );
 186     double fDays = 0.0;
 187     double fTime = modf( fSerial, &fDays );
 188
 189     // calculate date from number of days with O(1) complexity
 190     sal_Int32 nDays = getLimitedValue< sal_Int32, double >( fDays + mnNullDate, 0, 3652424 );
 191     // skip year 0, assumed to be a leap year. By starting at year 1, leap years can be handled easily
 192     if( nDays >= 366 ) { ++aDateTime.Year; nDays -= 366; }
 193     // skip full blocks of 400, 100, 4 years, and remaining full years
 194     lclSkipYearBlock( nDays, aDateTime.Year, 400 * 365 + 97, 400, 24 );
 195     lclSkipYearBlock( nDays, aDateTime.Year, 100 * 365 + 24, 100, 3 );
 196     lclSkipYearBlock( nDays, aDateTime.Year, 4 * 365 + 1, 4, 24 );
 197     lclSkipYearBlock( nDays, aDateTime.Year, 365, 1, 3 );
 198     // skip full months of current year
 199     static const sal_Int32 spnDaysInMonth[] = { 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 200     if( (nDays >= 59) && !lclIsLeapYear( aDateTime.Year ) ) ++nDays;
 201     const sal_Int32* pnDaysInMonth = spnDaysInMonth;
 202     while( *pnDaysInMonth >= nDays ) { ++aDateTime.Month; nDays -= *pnDaysInMonth; ++pnDaysInMonth; }
 203     aDateTime.Day = static_cast< sal_uInt16 >( nDays + 1 );
 204
 205     // calculate time from fractional part of serial
 206     sal_Int32 nTime = getLimitedValue< sal_Int32, double >( fTime * 86400, 0, 86399 );
 207     aDateTime.Seconds = static_cast< sal_uInt16 >( nTime % 60 );
 208     nTime /= 60;
 209     aDateTime.Minutes = static_cast< sal_uInt16 >( nTime % 60 );
 210     aDateTime.Hours = static_cast< sal_uInt16 >( nTime / 60 );
 211
 212     return aDateTime;
 213 }
 214
 215 sal_uInt8 UnitConverter::calcBiffErrorCode( const OUString& rErrorCode ) const
 216 {
 217     OoxErrorCodeMap::const_iterator aIt = maOoxErrCodes.find( rErrorCode );
 218     return (aIt == maOoxErrCodes.end()) ? BIFF_ERR_NA : aIt->second;
 219 }
 220
 221 OUString UnitConverter::calcErrorString( sal_uInt8 nErrorCode ) const
 222 {
 223     OoxErrorCodeMap::const_iterator iFail( maOoxErrCodes.end());
 224     for (OoxErrorCodeMap::const_iterator aIt( maOoxErrCodes.begin()); aIt != maOoxErrCodes.end(); ++aIt)
 225     {
 226         if (aIt->second == nErrorCode)
 227             return aIt->first;
 228         if (aIt->second == BIFF_ERR_NA)
 229             iFail = aIt;
 230     }
 231     assert(iFail != maOoxErrCodes.end());   // BIFF_ERR_NA really should be in the map..
 232     return iFail != maOoxErrCodes.end() ? iFail->first : OUString();
 233 }
 234
 235 void UnitConverter::addErrorCode( sal_uInt8 nErrorCode, const OUString& rErrorCode )
 236 {
 237     maOoxErrCodes[ rErrorCode ]  = nErrorCode;
 238 }
 239
 240 double UnitConverter::getCoefficient( Unit eUnit ) const
 241 {
 242     OSL_ENSURE( static_cast< size_t >( eUnit ) < UNIT_ENUM_SIZE, "UnitConverter::getCoefficient - invalid unit" );
 243     return maCoeffs[ static_cast< size_t >( eUnit ) ];
 244 }
 245
 246 } // namespace xls
 247 } // namespace oox
 248
 249 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */