sw/source/ui/dbui/createaddresslistdialog.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include <sal/config.h>
  21
  22 #include <cstddef>
  23
  24 #include <osl/diagnose.h>
  25 #include <swtypes.hxx>
  26 #include "createaddresslistdialog.hxx"
  27 #include "customizeaddresslistdialog.hxx"
  28 #include <mmconfigitem.hxx>
  29 #include <vcl/svapp.hxx>
  30 #include <unotools/pathoptions.hxx>
  31 #include <sfx2/filedlghelper.hxx>
  32 #include <sfx2/docfile.hxx>
  33 #include <rtl/textenc.h>
  34 #include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
  35 #include <com/sun/star/ui/dialogs/XFilePicker3.hpp>
  36 #include <tools/urlobj.hxx>
  37 #include <strings.hrc>
  38 #include <map>
  39
  40 using namespace ::com::sun::star;
  41 using namespace ::com::sun::star::ui::dialogs;
  42
  43 namespace {
  44
  45 struct SwAddressFragment
  46 {
  47     std::unique_ptr<weld::Builder> m_xBuilder;
  48     std::unique_ptr<weld::Label> m_xLabel;
  49     std::unique_ptr<weld::Entry> m_xEntry;
  50     weld::Container* m_pGrid;
  51
  52     SwAddressFragment(weld::Container* pGrid, int nLine)
  53         : m_xBuilder(Application::CreateBuilder(pGrid, "modules/swriter/ui/addressfragment.ui"))
  54         , m_xLabel(m_xBuilder->weld_label("label"))
  55         , m_xEntry(m_xBuilder->weld_entry("entry"))
  56         , m_pGrid(pGrid)
  57     {
  58         m_xLabel->set_grid_left_attach(0);
  59         m_xLabel->set_grid_top_attach(nLine);
  60
  61         m_xEntry->set_grid_left_attach(1);
  62         m_xEntry->set_grid_top_attach(nLine);
  63     }
  64
  65     ~SwAddressFragment()
  66     {
  67         m_pGrid->move(m_xEntry.get(), nullptr);
  68         m_pGrid->move(m_xLabel.get(), nullptr);
  69     }
  70 };
  71
  72 }
  73
  74 class SwAddressControl_Impl
  75 {
  76     std::map<weld::Entry*, sal_Int32> m_aEditLines;
  77
  78     SwCSVData*                      m_pData;
  79     sal_uInt32                      m_nCurrentDataSet;
  80
  81     bool                            m_bNoDataSet;
  82
  83     std::unique_ptr<weld::ScrolledWindow> m_xScrollBar;
  84     std::unique_ptr<weld::Container> m_xWindow;
  85     std::vector<std::unique_ptr<SwAddressFragment>> m_aLines;
  86
  87     DECL_LINK(GotFocusHdl_Impl, weld::Widget&, void);
  88     DECL_LINK(EditModifyHdl_Impl, weld::Entry&, void);
  89
  90     void                MakeVisible(const tools::Rectangle& aRect);
  91
  92 public:
  93     SwAddressControl_Impl(weld::Builder& rBuilder);
  94
  95     void        SetData(SwCSVData& rDBData);
  96
  97     void        SetCurrentDataSet(sal_uInt32 nSet);
  98     void        CurrentDataSetInvalidated() { m_nCurrentDataSet = std::numeric_limits<sal_uInt32>::max(); }
  99     sal_uInt32  GetCurrentDataSet() const { return m_nCurrentDataSet; }
 100     void        SetCursorTo(std::size_t nElement);
 101 };
 102
 103 SwAddressControl_Impl::SwAddressControl_Impl(weld::Builder& rBuilder)
 104     : m_pData(nullptr)
 105     , m_nCurrentDataSet(0)
 106     , m_bNoDataSet(true)
 107     , m_xScrollBar(rBuilder.weld_scrolled_window("scrollwin"))
 108     , m_xWindow(rBuilder.weld_container("CONTAINER"))
 109 {
 110 }
 111
 112 void SwAddressControl_Impl::SetData(SwCSVData& rDBData)
 113 {
 114     m_pData = &rDBData;
 115     //when the address data is updated then remove the controls and build again
 116     if (!m_aLines.empty())
 117     {
 118         m_aLines.clear();
 119         m_bNoDataSet = true;
 120     }
 121
 122     Link<weld::Widget&,void> aFocusLink = LINK(this, SwAddressControl_Impl, GotFocusHdl_Impl);
 123     Link<weld::Entry&,void> aEditModifyLink = LINK(this, SwAddressControl_Impl, EditModifyHdl_Impl);
 124     sal_Int32 nLines = 0;
 125     for (const auto& rHeader : m_pData->aDBColumnHeaders)
 126     {
 127         m_aLines.emplace_back(new SwAddressFragment(m_xWindow.get(), nLines));
 128
 129         // when we have one line, measure it to get the line height to use as
 130         // the basis for overall size request
 131         if (nLines == 0)
 132         {
 133             auto nLineHeight = m_xWindow->get_preferred_size().Height();
 134             m_xScrollBar->set_size_request(m_xScrollBar->get_approximate_digit_width() * 65,
 135                                            nLineHeight * 10);
 136         }
 137
 138         weld::Label* pNewFT = m_aLines.back()->m_xLabel.get();
 139         weld::Entry* pNewED = m_aLines.back()->m_xEntry.get();
 140         //set nLines a position identifier - used in the ModifyHdl
 141         m_aEditLines[pNewED] = nLines;
 142         pNewED->connect_focus_in(aFocusLink);
 143         pNewED->connect_changed(aEditModifyLink);
 144
 145         pNewFT->set_label(rHeader);
 146
 147         nLines++;
 148     }
 149 }
 150
 151 void SwAddressControl_Impl::SetCurrentDataSet(sal_uInt32 nSet)
 152 {
 153     if(!(m_bNoDataSet || m_nCurrentDataSet != nSet))
 154         return;
 155
 156     m_bNoDataSet = false;
 157     m_nCurrentDataSet = nSet;
 158     OSL_ENSURE(m_pData->aDBData.size() > m_nCurrentDataSet, "wrong data set index");
 159     if(m_pData->aDBData.size() > m_nCurrentDataSet)
 160     {
 161         sal_uInt32 nIndex = 0;
 162         for(auto& rLine : m_aLines)
 163         {
 164             OSL_ENSURE(nIndex < m_pData->aDBData[m_nCurrentDataSet].size(),
 165                         "number of columns doesn't match number of Edits");
 166             rLine->m_xEntry->set_text(m_pData->aDBData[m_nCurrentDataSet][nIndex]);
 167             ++nIndex;
 168         }
 169     }
 170 }
 171
 172 IMPL_LINK(SwAddressControl_Impl, GotFocusHdl_Impl, weld::Widget&, rEdit, void)
 173 {
 174     int x, y, width, height;
 175     rEdit.get_extents_relative_to(*m_xWindow, x, y, width, height);
 176     // the container has a border of 3 in the .ui
 177     tools::Rectangle aRect(Point(x - 3, y - 3), Size(width + 6, height + 6));
 178     MakeVisible(aRect);
 179 }
 180
 181 void SwAddressControl_Impl::MakeVisible(const tools::Rectangle & rRect)
 182 {
 183     //determine range of visible positions
 184     auto nMinVisiblePos = m_xScrollBar->vadjustment_get_value();
 185     auto nMaxVisiblePos = nMinVisiblePos + m_xScrollBar->vadjustment_get_page_size();
 186     if (rRect.Top() < nMinVisiblePos || rRect.Bottom() > nMaxVisiblePos)
 187         m_xScrollBar->vadjustment_set_value(rRect.Top());
 188 }
 189
 190 // copy data changes into database
 191 IMPL_LINK(SwAddressControl_Impl, EditModifyHdl_Impl, weld::Entry&, rEdit, void)
 192 {
 193     //get the data element number of the current set
 194     sal_Int32 nIndex = m_aEditLines[&rEdit];
 195     //get the index of the set
 196     OSL_ENSURE(m_pData->aDBData.size() > m_nCurrentDataSet, "wrong data set index" );
 197     if (m_pData->aDBData.size() > m_nCurrentDataSet)
 198     {
 199         m_pData->aDBData[m_nCurrentDataSet][nIndex] = rEdit.get_text();
 200     }
 201 }
 202
 203 void SwAddressControl_Impl::SetCursorTo(std::size_t nElement)
 204 {
 205     if (nElement < m_aLines.size())
 206     {
 207         weld::Entry* pEdit = m_aLines[nElement]->m_xEntry.get();
 208         pEdit->grab_focus();
 209     }
 210
 211 }
 212
 213 SwCreateAddressListDialog::SwCreateAddressListDialog(
 214         weld::Window* pParent, const OUString& rURL, SwMailMergeConfigItem const & rConfig)
 215     : SfxDialogController(pParent, "modules/swriter/ui/createaddresslist.ui", "CreateAddressList")
 216     , m_sAddressListFilterName(SwResId(ST_FILTERNAME))
 217     , m_sURL(rURL)
 218     , m_pCSVData(new SwCSVData)
 219     , m_xAddressControl(new SwAddressControl_Impl(*m_xBuilder))
 220     , m_xNewPB(m_xBuilder->weld_button("NEW"))
 221     , m_xDeletePB(m_xBuilder->weld_button("DELETE"))
 222     , m_xFindPB(m_xBuilder->weld_button("FIND"))
 223     , m_xCustomizePB(m_xBuilder->weld_button("CUSTOMIZE"))
 224     , m_xStartPB(m_xBuilder->weld_button("START"))
 225     , m_xPrevPB(m_xBuilder->weld_button("PREV"))
 226     , m_xSetNoED(m_xBuilder->weld_entry("SETNOED"))
 227     , m_xSetNoNF(m_xBuilder->weld_spin_button("SETNOSB"))
 228     , m_xNextPB(m_xBuilder->weld_button("NEXT"))
 229     , m_xEndPB(m_xBuilder->weld_button("END"))
 230     , m_xOK(m_xBuilder->weld_button("ok"))
 231 {
 232     m_xSetNoNF->set_min(1);
 233
 234     m_xNewPB->connect_clicked(LINK(this, SwCreateAddressListDialog, NewHdl_Impl));
 235     m_xDeletePB->connect_clicked(LINK(this, SwCreateAddressListDialog, DeleteHdl_Impl));
 236     m_xFindPB->connect_clicked(LINK(this, SwCreateAddressListDialog, FindHdl_Impl));
 237     m_xCustomizePB->connect_clicked(LINK(this, SwCreateAddressListDialog, CustomizeHdl_Impl));
 238     m_xOK->connect_clicked(LINK(this, SwCreateAddressListDialog, OkHdl_Impl));
 239
 240     Link<weld::Button&,void> aLk = LINK(this, SwCreateAddressListDialog, DBCursorHdl_Impl);
 241     m_xStartPB->connect_clicked(aLk);
 242     m_xPrevPB->connect_clicked(aLk);
 243     m_xSetNoED->connect_changed(LINK(this, SwCreateAddressListDialog, DBNumCursorHdl_Impl));
 244     m_xSetNoED->connect_focus_out(LINK(this, SwCreateAddressListDialog, RefreshNum_Impl));
 245     m_xNextPB->connect_clicked(aLk);
 246     m_xEndPB->connect_clicked(aLk);
 247
 248     if (!m_sURL.isEmpty())
 249     {
 250         //file exists, has to be loaded here
 251         SfxMedium aMedium( m_sURL, StreamMode::READ );
 252         SvStream* pStream = aMedium.GetInStream();
 253         if(pStream)
 254         {
 255             pStream->SetLineDelimiter( LINEEND_LF );
 256             pStream->SetStreamCharSet(RTL_TEXTENCODING_UTF8);
 257
 258             OUString sLine;
 259             bool bRead = pStream->ReadByteStringLine( sLine, RTL_TEXTENCODING_UTF8 );
 260
 261             if(bRead && !sLine.isEmpty())
 262             {
 263                 sal_Int32 nIndex = 0;
 264                 do
 265                 {
 266                     const OUString sHeader = sLine.getToken( 0, '\t', nIndex );
 267                     OSL_ENSURE(sHeader.getLength() > 2 &&
 268                             sHeader.startsWith("\"") && sHeader.endsWith("\""),
 269                             "Wrong format of header");
 270                     if(sHeader.getLength() > 2)
 271                     {
 272                         m_pCSVData->aDBColumnHeaders.push_back( sHeader.copy(1, sHeader.getLength() -2));
 273                     }
 274                 }
 275                 while (nIndex > 0);
 276             }
 277             while(pStream->ReadByteStringLine( sLine, RTL_TEXTENCODING_UTF8 ))
 278             {
 279                 std::vector<OUString> aNewData;
 280                 //analyze data line
 281                 sal_Int32 nIndex = { sLine.isEmpty() ? -1 : 0 };
 282                 while (nIndex >= 0)
 283                 {
 284                     const OUString sData = sLine.getToken( 0, '\t', nIndex );
 285                     OSL_ENSURE( sData.startsWith("\"") && sData.endsWith("\""),
 286                             "Wrong format of line");
 287                     if(sData.getLength() >= 2)
 288                         aNewData.push_back(sData.copy(1, sData.getLength() - 2));
 289                     else
 290                         aNewData.push_back(sData);
 291                 }
 292                 m_pCSVData->aDBData.push_back( aNewData );
 293             }
 294         }
 295     }
 296     else
 297     {
 298         //database has to be created
 299         const std::vector<std::pair<OUString, int>>& rAddressHeader = rConfig.GetDefaultAddressHeaders();
 300         const sal_uInt32 nCount = rAddressHeader.size();
 301         for(sal_uInt32 nHeader = 0; nHeader < nCount; ++nHeader)
 302             m_pCSVData->aDBColumnHeaders.push_back(rAddressHeader[nHeader].first);
 303         std::vector<OUString> aNewData;
 304         aNewData.insert(aNewData.begin(), nCount, OUString());
 305         m_pCSVData->aDBData.push_back(aNewData);
 306     }
 307     //now fill the address control
 308     m_xAddressControl->SetData(*m_pCSVData);
 309     m_xAddressControl->SetCurrentDataSet(0);
 310     m_xSetNoNF->set_max(m_pCSVData->aDBData.size());
 311
 312     m_xSetNoNF->set_value(1);
 313     RefreshNum_Impl(*m_xSetNoED);
 314
 315     UpdateButtons();
 316 }
 317
 318 SwCreateAddressListDialog::~SwCreateAddressListDialog()
 319 {
 320 }
 321
 322 IMPL_LINK_NOARG(SwCreateAddressListDialog, NewHdl_Impl, weld::Button&, void)
 323 {
 324     sal_uInt32 nCurrent = m_xAddressControl->GetCurrentDataSet();
 325     std::vector<OUString> aNewData;
 326     aNewData.insert(aNewData.begin(), m_pCSVData->aDBColumnHeaders.size(), OUString());
 327     m_pCSVData->aDBData.insert(m_pCSVData->aDBData.begin() + ++nCurrent, aNewData);
 328     m_xSetNoNF->set_max(m_pCSVData->aDBData.size());
 329     //the NumericField start at 1
 330     m_xSetNoNF->set_value(nCurrent + 1);
 331     RefreshNum_Impl(*m_xSetNoED);
 332     //the address control starts at 0
 333     m_xAddressControl->SetCurrentDataSet(nCurrent);
 334     UpdateButtons();
 335 }
 336
 337 IMPL_LINK_NOARG(SwCreateAddressListDialog, DeleteHdl_Impl, weld::Button&, void)
 338 {
 339     sal_uInt32 nCurrent = m_xAddressControl->GetCurrentDataSet();
 340     if (m_pCSVData->aDBData.size() > 1)
 341     {
 342         m_pCSVData->aDBData.erase(m_pCSVData->aDBData.begin() + nCurrent);
 343         if (nCurrent)
 344             --nCurrent;
 345     }
 346     else
 347     {
 348         // if only one set is available then clear the data
 349         m_pCSVData->aDBData[0].assign(m_pCSVData->aDBData[0].size(), OUString());
 350         m_xDeletePB->set_sensitive(false);
 351     }
 352     m_xAddressControl->CurrentDataSetInvalidated();
 353     m_xAddressControl->SetCurrentDataSet(nCurrent);
 354     m_xSetNoNF->set_max(m_pCSVData->aDBData.size());
 355     UpdateButtons();
 356 }
 357
 358 IMPL_LINK_NOARG(SwCreateAddressListDialog, FindHdl_Impl, weld::Button&, void)
 359 {
 360     if (!m_xFindDlg)
 361     {
 362         m_xFindDlg.reset(new SwFindEntryDialog(this));
 363         weld::ComboBox& rColumnBox = m_xFindDlg->GetFieldsListBox();
 364         for(const auto& rHeader : m_pCSVData->aDBColumnHeaders)
 365             rColumnBox.append_text(rHeader);
 366         rColumnBox.set_active(0);
 367         m_xFindDlg->show();
 368     }
 369     else
 370         m_xFindDlg->set_visible(!m_xFindDlg->get_visible());
 371 }
 372
 373 IMPL_LINK_NOARG(SwCreateAddressListDialog, CustomizeHdl_Impl, weld::Button&, void)
 374 {
 375     SwCustomizeAddressListDialog aDlg(m_xDialog.get(), *m_pCSVData);
 376     if (aDlg.run() == RET_OK)
 377     {
 378         m_pCSVData = aDlg.ReleaseNewData();
 379         m_xAddressControl->SetData(*m_pCSVData);
 380         m_xAddressControl->SetCurrentDataSet(m_xAddressControl->GetCurrentDataSet());
 381     }
 382
 383     //update find dialog
 384     if (m_xFindDlg)
 385     {
 386         weld::ComboBox& rColumnBox = m_xFindDlg->GetFieldsListBox();
 387         rColumnBox.clear();
 388         for(const auto& rHeader : m_pCSVData->aDBColumnHeaders)
 389             rColumnBox.append_text(rHeader);
 390     }
 391 }
 392
 393 namespace
 394 {
 395
 396 void lcl_WriteValues(const std::vector<OUString> *pFields, SvStream* pStream)
 397 {
 398     OUStringBuffer sLine;
 399     const std::vector< OUString >::const_iterator aBegin = pFields->begin();
 400     const std::vector< OUString >::const_iterator aEnd = pFields->end();
 401     for(std::vector< OUString >::const_iterator aIter = aBegin; aIter != aEnd; ++aIter)
 402     {
 403         if (aIter==aBegin)
 404         {
 405             sLine.append("\"").append(*aIter).append("\"");
 406         }
 407         else
 408         {
 409             sLine.append("\t\"").append(*aIter).append("\"");
 410         }
 411     }
 412     pStream->WriteByteStringLine( sLine.makeStringAndClear(), RTL_TEXTENCODING_UTF8 );
 413 }
 414
 415 }
 416
 417 IMPL_LINK_NOARG(SwCreateAddressListDialog, OkHdl_Impl, weld::Button&, void)
 418 {
 419     if(m_sURL.isEmpty())
 420     {
 421         sfx2::FileDialogHelper aDlgHelper(TemplateDescription::FILESAVE_SIMPLE,
 422                                           FileDialogFlags::NONE, m_xDialog.get());
 423         uno::Reference < XFilePicker3 > xFP = aDlgHelper.GetFilePicker();
 424
 425         const OUString sPath( SvtPathOptions().SubstituteVariable("$(userurl)/database") );
 426         aDlgHelper.SetDisplayDirectory( sPath );
 427         xFP->appendFilter( m_sAddressListFilterName, "*.csv" );
 428         xFP->setCurrentFilter( m_sAddressListFilterName ) ;
 429
 430         if( ERRCODE_NONE == aDlgHelper.Execute() )
 431         {
 432             m_sURL = xFP->getSelectedFiles().getConstArray()[0];
 433             INetURLObject aResult( m_sURL );
 434             aResult.setExtension("csv");
 435             m_sURL = aResult.GetMainURL(INetURLObject::DecodeMechanism::NONE);
 436         }
 437     }
 438     if(m_sURL.isEmpty())
 439         return;
 440
 441     SfxMedium aMedium( m_sURL, StreamMode::READWRITE|StreamMode::TRUNC );
 442     SvStream* pStream = aMedium.GetOutStream();
 443     pStream->SetLineDelimiter( LINEEND_LF );
 444     pStream->SetStreamCharSet(RTL_TEXTENCODING_UTF8);
 445
 446     lcl_WriteValues(&(m_pCSVData->aDBColumnHeaders), pStream);
 447
 448     for(const auto& rData : m_pCSVData->aDBData)
 449     {
 450         lcl_WriteValues(&rData, pStream);
 451     }
 452     aMedium.Commit();
 453     m_xDialog->response(RET_OK);
 454 }
 455
 456 IMPL_LINK(SwCreateAddressListDialog, DBCursorHdl_Impl, weld::Button&, rButton, void)
 457 {
 458     int nValue = m_xSetNoNF->get_value();
 459
 460     if (&rButton == m_xStartPB.get())
 461         nValue = 1;
 462     else if (&rButton == m_xPrevPB.get())
 463     {
 464         if (nValue > 1)
 465             --nValue;
 466     }
 467     else if (&rButton == m_xNextPB.get())
 468     {
 469         if (nValue < m_xSetNoNF->get_max())
 470             ++nValue;
 471     }
 472     else //m_aEndPB
 473         nValue = m_xSetNoNF->get_max();
 474     if (nValue != m_xSetNoNF->get_value())
 475     {
 476         m_xSetNoNF->set_value(nValue);
 477         RefreshNum_Impl(*m_xSetNoED);
 478         DBNumCursor();
 479     }
 480 }
 481
 482 IMPL_LINK_NOARG(SwCreateAddressListDialog, DBNumCursorHdl_Impl, weld::Entry&, void)
 483 {
 484     m_xSetNoNF->set_text(m_xSetNoED->get_text());
 485     DBNumCursor();
 486 }
 487
 488 IMPL_LINK_NOARG(SwCreateAddressListDialog, RefreshNum_Impl, weld::Widget&, void)
 489 {
 490     m_xSetNoED->set_text(OUString::number(m_xSetNoNF->get_value()));
 491 }
 492
 493 void SwCreateAddressListDialog::DBNumCursor()
 494 {
 495     m_xAddressControl->SetCurrentDataSet(m_xSetNoNF->get_value() - 1);
 496     UpdateButtons();
 497 }
 498
 499 void SwCreateAddressListDialog::UpdateButtons()
 500 {
 501     sal_uInt32 nCurrent = static_cast< sal_uInt32 >(m_xSetNoNF->get_value() );
 502     sal_uInt32 nSize = static_cast<sal_uInt32>(m_pCSVData->aDBData.size());
 503     m_xStartPB->set_sensitive(nCurrent != 1);
 504     m_xPrevPB->set_sensitive(nCurrent != 1);
 505     m_xNextPB->set_sensitive(nCurrent != nSize);
 506     m_xEndPB->set_sensitive(nCurrent != nSize);
 507     m_xDeletePB->set_sensitive(nSize > 0);
 508 }
 509
 510 void SwCreateAddressListDialog::Find(const OUString& rSearch, sal_Int32 nColumn)
 511 {
 512     const OUString sSearch = rSearch.toAsciiLowerCase();
 513     sal_uInt32 nCurrent = m_xAddressControl->GetCurrentDataSet();
 514     //search forward
 515     bool bFound = false;
 516     sal_uInt32 nStart = nCurrent + 1;
 517     sal_uInt32 nEnd = m_pCSVData->aDBData.size();
 518     std::size_t nElement = 0;
 519     sal_uInt32 nPos = 0;
 520     for(short nTemp = 0; nTemp < 2 && !bFound; nTemp++)
 521     {
 522         for(nPos = nStart; nPos < nEnd; ++nPos)
 523         {
 524             std::vector< OUString> const & aData = m_pCSVData->aDBData[nPos];
 525             if(nColumn >=0)
 526                 bFound = -1 != aData[static_cast<sal_uInt32>(nColumn)].toAsciiLowerCase().indexOf(sSearch);
 527             else
 528             {
 529                 for( nElement = 0; nElement < aData.size(); ++nElement)
 530                 {
 531                     bFound = -1 != aData[nElement].toAsciiLowerCase().indexOf(sSearch);
 532                     if(bFound)
 533                     {
 534                         nColumn = nElement; //TODO: std::size_t -> sal_Int32!
 535                         break;
 536                     }
 537                 }
 538             }
 539             if(bFound)
 540                 break;
 541         }
 542         nStart = 0;
 543         nEnd = nCurrent + 1;
 544     }
 545     if(bFound)
 546     {
 547         m_xAddressControl->SetCurrentDataSet(nPos);
 548         m_xSetNoNF->set_value( nPos + 1 );
 549         RefreshNum_Impl(*m_xSetNoED);
 550         UpdateButtons();
 551         m_xAddressControl->SetCursorTo(nElement);
 552     }
 553 }
 554
 555 SwFindEntryDialog::SwFindEntryDialog(SwCreateAddressListDialog* pParent)
 556     : GenericDialogController(pParent->getDialog(), "modules/swriter/ui/findentrydialog.ui", "FindEntryDialog")
 557     , m_pParent(pParent)
 558     , m_xFindED(m_xBuilder->weld_entry("entry"))
 559     , m_xFindOnlyCB(m_xBuilder->weld_check_button("findin"))
 560     , m_xFindOnlyLB(m_xBuilder->weld_combo_box("area"))
 561     , m_xFindPB(m_xBuilder->weld_button("find"))
 562     , m_xCancel(m_xBuilder->weld_button("cancel"))
 563 {
 564     m_xFindPB->connect_clicked(LINK(this, SwFindEntryDialog, FindHdl_Impl));
 565     m_xFindED->connect_changed(LINK(this, SwFindEntryDialog, FindEnableHdl_Impl));
 566     m_xCancel->connect_clicked(LINK(this, SwFindEntryDialog, CloseHdl_Impl));
 567 }
 568
 569 SwFindEntryDialog::~SwFindEntryDialog()
 570 {
 571 }
 572
 573 IMPL_LINK_NOARG(SwFindEntryDialog, FindHdl_Impl, weld::Button&, void)
 574 {
 575     sal_Int32 nColumn = -1;
 576     if (m_xFindOnlyCB->get_active())
 577         nColumn = m_xFindOnlyLB->get_active();
 578     m_pParent->Find(m_xFindED->get_text(), nColumn);
 579 }
 580
 581 IMPL_LINK_NOARG(SwFindEntryDialog, FindEnableHdl_Impl, weld::Entry&, void)
 582 {
 583     m_xFindPB->set_sensitive(!m_xFindED->get_text().isEmpty());
 584 }
 585
 586 IMPL_LINK_NOARG(SwFindEntryDialog, CloseHdl_Impl, weld::Button&, void)
 587 {
 588     m_xDialog->hide();
 589 }
 590
 591 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */