sd/source/core/drawdoc.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include <libxml/xmlwriter.h>
  21
  22 #include "PageListWatcher.hxx"
  23 #include <com/sun/star/document/PrinterIndependentLayout.hpp>
  24 #include <com/sun/star/i18n/ScriptType.hpp>
  25 #include <com/sun/star/beans/XPropertyContainer.hpp>
  26 #include <com/sun/star/beans/PropertyAttribute.hpp>
  27 #include <com/sun/star/document/XDocumentProperties.hpp>
  28 #include <com/sun/star/frame/XModel.hpp>
  29 #include <editeng/forbiddencharacterstable.hxx>
  30
  31 #include <svl/srchitem.hxx>
  32 #include <editeng/eeitem.hxx>
  33 #include <editeng/scriptspaceitem.hxx>
  34 #include <tools/debug.hxx>
  35
  36 #include <unotools/configmgr.hxx>
  37 #include <unotools/useroptions.hxx>
  38 #include <officecfg/Office/Impress.hxx>
  39
  40 #include <sfx2/linkmgr.hxx>
  41 #include <Outliner.hxx>
  42 #include <sdmod.hxx>
  43 #include <editeng/editstat.hxx>
  44 #include <svx/svdotext.hxx>
  45 #include <editeng/unolingu.hxx>
  46 #include <svl/itempool.hxx>
  47 #include <com/sun/star/lang/XMultiServiceFactory.hpp>
  48 #include <com/sun/star/beans/XPropertySet.hpp>
  49 #include <editeng/outlobj.hxx>
  50 #include <comphelper/getexpandeduri.hxx>
  51 #include <i18nlangtag/mslangid.hxx>
  52 #include <i18nlangtag/languagetag.hxx>
  53 #include <unotools/charclass.hxx>
  54 #include <comphelper/processfactory.hxx>
  55 #include <unotools/lingucfg.hxx>
  56 #include <com/sun/star/uno/Reference.hxx>
  57 #include <com/sun/star/xml/dom/XDocumentBuilder.hpp>
  58 #include <com/sun/star/xml/dom/XDocument.hpp>
  59 #include <com/sun/star/xml/dom/XNodeList.hpp>
  60 #include <com/sun/star/xml/dom/DocumentBuilder.hpp>
  61 #include <com/sun/star/uno/XComponentContext.hpp>
  62 #include <rtl/ustring.hxx>
  63
  64 #include <editeng/outliner.hxx>
  65 #include <drawdoc.hxx>
  66 #include <sdpage.hxx>
  67 #include <strings.hrc>
  68 #include <glob.hxx>
  69 #include <stlpool.hxx>
  70 #include <sdresid.hxx>
  71 #include <customshowlist.hxx>
  72 #include <DrawDocShell.hxx>
  73 #include <GraphicDocShell.hxx>
  74 #include <sdxfer.hxx>
  75 #include <optsitem.hxx>
  76 #include <FrameView.hxx>
  77 #include <undo/undomanager.hxx>
  78 #include <sdundogr.hxx>
  79 #include <undopage.hxx>
  80 #include <vcl/settings.hxx>
  81 #include <vcl/svapp.hxx>
  82 #include <unokywds.hxx>
  83
  84 namespace com::sun::star::linguistic2 { class XHyphenator; }
  85 namespace com::sun::star::linguistic2 { class XSpellChecker1; }
  86
  87 using namespace ::sd;
  88 using namespace ::com::sun::star;
  89 using namespace ::com::sun::star::uno;
  90 using namespace ::com::sun::star::lang;
  91 using namespace ::com::sun::star::linguistic2;
  92
  93 using namespace com::sun::star::xml::dom;
  94 using ::com::sun::star::uno::Reference;
  95 using ::com::sun::star::lang::XMultiServiceFactory;
  96
  97
  98 SdDrawDocument* SdDrawDocument::s_pDocLockedInsertingLinks = nullptr;
  99
 100 PresentationSettings::PresentationSettings()
 101 :   mbAll( true ),
 102     mbEndless( false ),
 103     mbCustomShow(false),
 104     mbManual( false ),
 105     mbMouseVisible( false ),
 106     mbMouseAsPen( false ),
 107     mbLockedPages( false ),
 108     mbAlwaysOnTop( false ),
 109     mbFullScreen( true ),
 110     mbAnimationAllowed( true ),
 111     mnPauseTimeout( 0 ),
 112     mbShowPauseLogo( false ),
 113     mbStartCustomShow( false )
 114 {
 115 }
 116
 117 SdDrawDocument::SdDrawDocument(DocumentType eType, SfxObjectShell* pDrDocSh)
 118 :   FmFormModel(
 119         nullptr,
 120         pDrDocSh)
 121 , mpDocSh(static_cast< ::sd::DrawDocShell*>(pDrDocSh))
 122 , mpCreatingTransferable( nullptr )
 123 , mbHasOnlineSpellErrors(false)
 124 , mbInitialOnlineSpellingEnabled(true)
 125 , mbNewOrLoadCompleted(false)
 126 , mbOnlineSpell(false)
 127 , mbStartWithPresentation( false )
 128 , mbExitAfterPresenting( false )
 129 , meLanguage( LANGUAGE_SYSTEM )
 130 , meLanguageCJK( LANGUAGE_SYSTEM )
 131 , meLanguageCTL( LANGUAGE_SYSTEM )
 132 , mePageNumType(SVX_NUM_ARABIC)
 133 , mbAllocDocSh(false)
 134 , meDocType(eType)
 135 , mbEmbedFonts(false)
 136 , mbEmbedUsedFontsOnly(false)
 137 , mbEmbedFontScriptLatin(true)
 138 , mbEmbedFontScriptAsian(true)
 139 , mbEmbedFontScriptComplex(true)
 140 , mnImagePreferredDPI(0)
 141 {
 142     mpDrawPageListWatcher.reset(new ImpDrawPageListWatcher(*this));
 143     mpMasterPageListWatcher.reset(new ImpMasterPageListWatcher(*this));
 144
 145     InitLayoutVector();
 146     InitObjectVector();
 147     SetObjectShell(pDrDocSh);       // for VCDrawModel
 148
 149     if (mpDocSh)
 150     {
 151         SetSwapGraphics();
 152     }
 153
 154     // Set measuring unit (of the application) and scale (of SdMod)
 155     sal_Int32 nX, nY;
 156     SdOptions* pOptions = SD_MOD()->GetSdOptions(meDocType);
 157     pOptions->GetScale( nX, nY );
 158
 159     // Allow UI scale only for draw documents.
 160     if( eType == DocumentType::Draw )
 161         SetUIUnit( static_cast<FieldUnit>(pOptions->GetMetric()), Fraction( nX, nY ) );  // user-defined
 162     else
 163         SetUIUnit( static_cast<FieldUnit>(pOptions->GetMetric()), Fraction( 1, 1 ) );    // default
 164
 165     SetScaleUnit(MapUnit::Map100thMM);
 166     SetScaleFraction(Fraction(1, 1));
 167     SetDefaultFontHeight(o3tl::convert(24, o3tl::Length::pt, o3tl::Length::mm100));
 168
 169     m_pItemPool->SetDefaultMetric(MapUnit::Map100thMM);
 170     m_pItemPool->FreezeIdRanges();
 171     SetTextDefaults();
 172
 173     // DrawingEngine has to know where it is...
 174     FmFormModel::SetStyleSheetPool( new SdStyleSheetPool( GetPool(), this ) );
 175
 176     // Set StyleSheetPool for DrawOutliner, so text objects can be read correctly.
 177     // The link to the StyleRequest handler of the document is set later, in
 178     // NewOrLoadCompleted, because only then do all the templates exist.
 179     SdrOutliner& rOutliner = GetDrawOutliner();
 180     rOutliner.SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 181     SetCalcFieldValueHdl( &rOutliner );
 182
 183     // set linguistic options
 184     if (!utl::ConfigManager::IsFuzzing())
 185     {
 186         const SvtLinguConfig    aLinguConfig;
 187         SvtLinguOptions         aOptions;
 188         aLinguConfig.GetOptions( aOptions );
 189
 190         SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage,
 191             css::i18n::ScriptType::LATIN), EE_CHAR_LANGUAGE );
 192         SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage_CJK,
 193             css::i18n::ScriptType::ASIAN), EE_CHAR_LANGUAGE_CJK );
 194         SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage_CTL,
 195             css::i18n::ScriptType::COMPLEX), EE_CHAR_LANGUAGE_CTL );
 196
 197         mbOnlineSpell = aOptions.bIsSpellAuto;
 198     }
 199
 200     LanguageType eRealLanguage = MsLangId::getRealLanguage( meLanguage );
 201     LanguageTag aLanguageTag( eRealLanguage);
 202     mpCharClass.reset(new CharClass( aLanguageTag ));
 203
 204     // If the current application language is a language that uses right-to-left text...
 205     LanguageType eRealCTLLanguage = Application::GetSettings().GetLanguageTag().getLanguageType();
 206
 207     // for korean and japanese languages we have a different default for apply spacing between asian, latin and ctl text
 208     if (MsLangId::isKorean(eRealCTLLanguage) || (LANGUAGE_JAPANESE == eRealCTLLanguage))
 209     {
 210         GetPool().GetSecondaryPool()->SetPoolDefaultItem( SvxScriptSpaceItem( false, EE_PARA_ASIANCJKSPACING ) );
 211     }
 212
 213     // Set DefTab and SpellOptions for the SD module
 214     sal_uInt16 nDefTab = pOptions->GetDefTab();
 215     SetDefaultTabulator( nDefTab );
 216
 217     try
 218     {
 219         Reference< XSpellChecker1 > xSpellChecker( LinguMgr::GetSpellChecker() );
 220         if ( xSpellChecker.is() )
 221             rOutliner.SetSpeller( xSpellChecker );
 222
 223         Reference< XHyphenator > xHyphenator( LinguMgr::GetHyphenator() );
 224         if( xHyphenator.is() )
 225             rOutliner.SetHyphenator( xHyphenator );
 226
 227         SetForbiddenCharsTable(SvxForbiddenCharactersTable::makeForbiddenCharactersTable(::comphelper::getProcessComponentContext()));
 228     }
 229     catch(...)
 230     {
 231         OSL_FAIL("Can't get SpellChecker");
 232     }
 233
 234     rOutliner.SetDefaultLanguage( Application::GetSettings().GetLanguageTag().getLanguageType() );
 235
 236     if (mpDocSh)
 237     {
 238         SetLinkManager( new sfx2::LinkManager(mpDocSh) );
 239     }
 240
 241     EEControlBits nCntrl = rOutliner.GetControlWord();
 242     nCntrl |= EEControlBits::ALLOWBIGOBJS;
 243
 244     if (mbOnlineSpell)
 245         nCntrl |= EEControlBits::ONLINESPELLING;
 246     else
 247         nCntrl &= ~EEControlBits::ONLINESPELLING;
 248
 249     nCntrl &= ~ EEControlBits::ULSPACESUMMATION;
 250     if ( meDocType != DocumentType::Impress )
 251         SetSummationOfParagraphs( false );
 252     else
 253     {
 254         SetSummationOfParagraphs( pOptions->IsSummationOfParagraphs() );
 255         if ( pOptions->IsSummationOfParagraphs() )
 256             nCntrl |= EEControlBits::ULSPACESUMMATION;
 257     }
 258     rOutliner.SetControlWord(nCntrl);
 259
 260     // Initialize the printer independent layout mode
 261     SetPrinterIndependentLayout (pOptions->GetPrinterIndependentLayout());
 262
 263     // Set the StyleSheetPool for HitTestOutliner.
 264     // The link to the StyleRequest handler of the document is set later, in
 265     // NewOrLoadCompleted, because only then do all the templates exist.
 266     m_pHitTestOutliner->SetStyleSheetPool( static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()) );
 267
 268     SetCalcFieldValueHdl( m_pHitTestOutliner.get() );
 269
 270     try
 271     {
 272         Reference< XSpellChecker1 > xSpellChecker( LinguMgr::GetSpellChecker() );
 273         if ( xSpellChecker.is() )
 274             m_pHitTestOutliner->SetSpeller( xSpellChecker );
 275
 276         Reference< XHyphenator > xHyphenator( LinguMgr::GetHyphenator() );
 277         if( xHyphenator.is() )
 278             m_pHitTestOutliner->SetHyphenator( xHyphenator );
 279     }
 280     catch(...)
 281     {
 282         OSL_FAIL("Can't get SpellChecker");
 283     }
 284
 285     m_pHitTestOutliner->SetDefaultLanguage( Application::GetSettings().GetLanguageTag().getLanguageType() );
 286
 287     EEControlBits nCntrl2 = m_pHitTestOutliner->GetControlWord();
 288     nCntrl2 |= EEControlBits::ALLOWBIGOBJS;
 289     nCntrl2 &= ~EEControlBits::ONLINESPELLING;
 290
 291     nCntrl2 &= ~ EEControlBits::ULSPACESUMMATION;
 292     if ( pOptions->IsSummationOfParagraphs() )
 293         nCntrl2 |= EEControlBits::ULSPACESUMMATION;
 294
 295     m_pHitTestOutliner->SetControlWord( nCntrl2 );
 296
 297     /** Create layers
 298       *
 299       * We create the following default layers on all pages and master pages:
 300       *
 301       * sUNO_LayerName_layout; "layout": default layer for drawing objects of normal pages
 302       * localized by SdResId(STR_LAYER_LAYOUT)
 303       *
 304       * sUNO_LayerName_background; "background": background of the master page
 305       * localized by SdResId(STR_LAYER_BCKGRND)
 306       *           (currently unused within normal pages and not visible to users)
 307       *
 308       * sUNO_LayerName_background_objects; "backgroundobjects": objects on the background of master pages
 309       * localized by SdResId(STR_LAYER_BCKGRNDOBJ)
 310       *           (currently unused within normal pages)
 311       *
 312       * sUNO_LayerName_controls; "controls": default layer for controls
 313       * localized by SdResId(STR_LAYER_CONTROLS)
 314       *           (currently special handling in regard to z-order)
 315       *
 316       * sUNO_LayerName_measurelines; "measurelines" : default layer for measure lines
 317       * localized by SdResId(STR_LAYER_MEASURELINES)
 318       */
 319
 320     {
 321         SdrLayerAdmin& rLayerAdmin = GetLayerAdmin();
 322         rLayerAdmin.NewLayer( sUNO_LayerName_layout );
 323         rLayerAdmin.NewLayer( sUNO_LayerName_background );
 324         rLayerAdmin.NewLayer( sUNO_LayerName_background_objects );
 325         rLayerAdmin.NewLayer( sUNO_LayerName_controls);
 326         rLayerAdmin.NewLayer( sUNO_LayerName_measurelines );
 327
 328         rLayerAdmin.SetControlLayerName(sUNO_LayerName_controls);
 329     }
 330
 331 }
 332
 333 // Destructor
 334 SdDrawDocument::~SdDrawDocument()
 335 {
 336     Broadcast(SdrHint(SdrHintKind::ModelCleared));
 337
 338     if (mpWorkStartupTimer)
 339     {
 340         if ( mpWorkStartupTimer->IsActive() )
 341             mpWorkStartupTimer->Stop();
 342
 343         mpWorkStartupTimer.reset();
 344     }
 345
 346     StopOnlineSpelling();
 347     mpOnlineSearchItem.reset();
 348
 349     CloseBookmarkDoc();
 350     SetAllocDocSh(false);
 351
 352     ClearModel(true);
 353
 354     if (m_pLinkManager)
 355     {
 356         // Release BaseLinks
 357         if ( !m_pLinkManager->GetLinks().empty() )
 358         {
 359             m_pLinkManager->Remove( 0, m_pLinkManager->GetLinks().size() );
 360         }
 361
 362         delete m_pLinkManager;
 363         m_pLinkManager = nullptr;
 364     }
 365
 366     maFrameViewList.clear();
 367     mpCustomShowList.reset();
 368     mpOutliner.reset();
 369     mpInternalOutliner.reset();
 370     mpCharClass.reset();
 371 }
 372
 373 void SdDrawDocument::adaptSizeAndBorderForAllPages(
 374     const Size& rNewSize,
 375     ::tools::Long nLeft,
 376     ::tools::Long nRight,
 377     ::tools::Long nUpper,
 378     ::tools::Long nLower)
 379 {
 380     const sal_uInt16 nMasterPageCnt(GetMasterSdPageCount(PageKind::Standard));
 381     const sal_uInt16 nPageCnt(GetSdPageCount(PageKind::Standard));
 382
 383     if(0 == nMasterPageCnt && 0 == nPageCnt)
 384     {
 385         return;
 386     }
 387
 388     SdPage* pPage(0 != nPageCnt ? GetSdPage(0, PageKind::Standard) : GetMasterSdPage(0, PageKind::Standard));
 389
 390     // call fully implemented local version, including getting
 391     // some more information from one of the Pages (1st one)
 392     AdaptPageSizeForAllPages(
 393         rNewSize,
 394         PageKind::Standard,
 395         nullptr,
 396         nLeft,
 397         nRight,
 398         nUpper,
 399         nLower,
 400         true,
 401         pPage->GetOrientation(),
 402         pPage->GetPaperBin(),
 403         pPage->IsBackgroundFullSize());
 404
 405     // adjust handout page to new format of the standard page
 406     if(0 != nPageCnt)
 407     {
 408         GetSdPage(0, PageKind::Handout)->CreateTitleAndLayout(true);
 409     }
 410 }
 411
 412 void SdDrawDocument::AdaptPageSizeForAllPages(
 413     const Size& rNewSize,
 414     PageKind ePageKind,
 415     SdUndoGroup* pUndoGroup,
 416     ::tools::Long nLeft,
 417     ::tools::Long nRight,
 418     ::tools::Long nUpper,
 419     ::tools::Long nLower,
 420     bool bScaleAll,
 421     Orientation eOrientation,
 422     sal_uInt16 nPaperBin,
 423     bool bBackgroundFullSize)
 424 {
 425     sal_uInt16 i;
 426     const sal_uInt16 nMasterPageCnt(GetMasterSdPageCount(ePageKind));
 427     const sal_uInt16 nPageCnt(GetSdPageCount(ePageKind));
 428
 429     if(0 == nMasterPageCnt && 0 == nPageCnt)
 430     {
 431         return;
 432     }
 433
 434     for (i = 0; i < nMasterPageCnt; i++)
 435     {
 436         // first, handle all master pages
 437         SdPage* pPage(GetMasterSdPage(i, ePageKind));
 438
 439         if(pUndoGroup)
 440         {
 441             SdUndoAction* pUndo(
 442                 new SdPageFormatUndoAction(
 443                     this,
 444                     pPage,
 445                     pPage->GetSize(),
 446                     pPage->GetLeftBorder(), pPage->GetRightBorder(),
 447                     pPage->GetUpperBorder(), pPage->GetLowerBorder(),
 448                     pPage->GetOrientation(),
 449                     pPage->GetPaperBin(),
 450                     pPage->IsBackgroundFullSize(),
 451                     rNewSize,
 452                     nLeft, nRight,
 453                     nUpper, nLower,
 454                     bScaleAll,
 455                     eOrientation,
 456                     nPaperBin,
 457                     bBackgroundFullSize));
 458             pUndoGroup->AddAction(pUndo);
 459         }
 460
 461         if (rNewSize.Width() > 0 || nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0)
 462         {
 463             ::tools::Rectangle aNewBorderRect(nLeft, nUpper, nRight, nLower);
 464             pPage->ScaleObjects(rNewSize, aNewBorderRect, bScaleAll);
 465
 466             if (rNewSize.Width() > 0)
 467             {
 468                 pPage->SetSize(rNewSize);
 469             }
 470         }
 471
 472         if( nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0 )
 473         {
 474             pPage->SetBorder(nLeft, nUpper, nRight, nLower);
 475         }
 476
 477         pPage->SetOrientation(eOrientation);
 478         pPage->SetPaperBin( nPaperBin );
 479         pPage->SetBackgroundFullSize( bBackgroundFullSize );
 480
 481         if ( ePageKind == PageKind::Standard )
 482         {
 483             GetMasterSdPage(i, PageKind::Notes)->CreateTitleAndLayout();
 484         }
 485
 486         pPage->CreateTitleAndLayout();
 487     }
 488
 489     for (i = 0; i < nPageCnt; i++)
 490     {
 491         // then, handle all pages
 492         SdPage* pPage(GetSdPage(i, ePageKind));
 493
 494         if(pUndoGroup)
 495         {
 496             SdUndoAction* pUndo(
 497                 new SdPageFormatUndoAction(
 498                     this,
 499                     pPage,
 500                     pPage->GetSize(),
 501                     pPage->GetLeftBorder(), pPage->GetRightBorder(),
 502                     pPage->GetUpperBorder(), pPage->GetLowerBorder(),
 503                     pPage->GetOrientation(),
 504                     pPage->GetPaperBin(),
 505                     pPage->IsBackgroundFullSize(),
 506                     rNewSize,
 507                     nLeft, nRight,
 508                     nUpper, nLower,
 509                     bScaleAll,
 510                     eOrientation,
 511                     nPaperBin,
 512                     bBackgroundFullSize));
 513             pUndoGroup->AddAction(pUndo);
 514         }
 515
 516         if (rNewSize.Width() > 0 || nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0)
 517         {
 518             ::tools::Rectangle aNewBorderRect(nLeft, nUpper, nRight, nLower);
 519             pPage->ScaleObjects(rNewSize, aNewBorderRect, bScaleAll);
 520
 521             if (rNewSize.Width() > 0)
 522             {
 523                 pPage->SetSize(rNewSize);
 524             }
 525         }
 526
 527         if( nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0 )
 528         {
 529             pPage->SetBorder(nLeft, nUpper, nRight, nLower);
 530         }
 531
 532         pPage->SetOrientation(eOrientation);
 533         pPage->SetPaperBin( nPaperBin );
 534         pPage->SetBackgroundFullSize( bBackgroundFullSize );
 535
 536         if ( ePageKind == PageKind::Standard )
 537         {
 538             SdPage* pNotesPage = GetSdPage(i, PageKind::Notes);
 539             pNotesPage->SetAutoLayout( pNotesPage->GetAutoLayout() );
 540         }
 541
 542         pPage->SetAutoLayout( pPage->GetAutoLayout() );
 543     }
 544 }
 545
 546 SdrModel* SdDrawDocument::AllocModel() const
 547 {
 548     return AllocSdDrawDocument();
 549 }
 550
 551 namespace
 552 {
 553
 554 /// Copies all user-defined properties from pSource to pDestination.
 555 void lcl_copyUserDefinedProperties(const SfxObjectShell* pSource, const SfxObjectShell* pDestination)
 556 {
 557     if (!pSource || !pDestination)
 558         return;
 559
 560     uno::Reference<document::XDocumentProperties> xSource = pSource->getDocProperties();
 561     uno::Reference<document::XDocumentProperties> xDestination = pDestination->getDocProperties();
 562     uno::Reference<beans::XPropertyContainer> xSourcePropertyContainer = xSource->getUserDefinedProperties();
 563     uno::Reference<beans::XPropertyContainer> xDestinationPropertyContainer = xDestination->getUserDefinedProperties();
 564     uno::Reference<beans::XPropertySet> xSourcePropertySet(xSourcePropertyContainer, uno::UNO_QUERY);
 565     const uno::Sequence<beans::Property> aProperties = xSourcePropertySet->getPropertySetInfo()->getProperties();
 566
 567     for (const beans::Property& rProperty : aProperties)
 568     {
 569         const OUString& rKey = rProperty.Name;
 570         uno::Any aValue = xSourcePropertySet->getPropertyValue(rKey);
 571         // We know that pDestination was just created, so has no properties: addProperty() will never throw.
 572         xDestinationPropertyContainer->addProperty(rKey, beans::PropertyAttribute::REMOVABLE, aValue);
 573     }
 574 }
 575
 576 }
 577
 578 // This method creates a new document (SdDrawDocument) and returns a pointer to
 579 // said document. The drawing engine uses this method to put the document (or
 580 // parts of it) into the clipboard/DragServer.
 581 SdDrawDocument* SdDrawDocument::AllocSdDrawDocument() const
 582 {
 583     SdDrawDocument* pNewModel = nullptr;
 584
 585     if( mpCreatingTransferable )
 586     {
 587         // Document is created for drag & drop/clipboard. To be able to
 588         // do this, the document has to know a DocShell (SvPersist).
 589         SfxObjectShell*   pObj = nullptr;
 590         ::sd::DrawDocShell*     pNewDocSh = nullptr;
 591
 592         if( meDocType == DocumentType::Impress )
 593             mpCreatingTransferable->SetDocShell( new ::sd::DrawDocShell(
 594                 SfxObjectCreateMode::EMBEDDED, true, meDocType ) );
 595         else
 596             mpCreatingTransferable->SetDocShell( new ::sd::GraphicDocShell(
 597                 SfxObjectCreateMode::EMBEDDED ) );
 598
 599         pObj = mpCreatingTransferable->GetDocShell().get();
 600         pNewDocSh = static_cast< ::sd::DrawDocShell*>( pObj );
 601         pNewDocSh->DoInitNew();
 602         pNewModel = pNewDocSh->GetDoc();
 603
 604         // Only necessary for clipboard -
 605         // for drag & drop this is handled by DragServer
 606         SdStyleSheetPool* pOldStylePool = static_cast<SdStyleSheetPool*>( GetStyleSheetPool() );
 607         SdStyleSheetPool* pNewStylePool = static_cast<SdStyleSheetPool*>( pNewModel->GetStyleSheetPool() );
 608
 609         pNewStylePool->CopyGraphicSheets(*pOldStylePool);
 610         pNewStylePool->CopyCellSheets(*pOldStylePool);
 611         pNewStylePool->CopyTableStyles(*pOldStylePool);
 612
 613         for (sal_uInt16 i = 0; i < GetMasterSdPageCount(PageKind::Standard); i++)
 614         {
 615             // Move with all of the master page's layouts
 616             OUString aOldLayoutName(const_cast<SdDrawDocument*>(this)->GetMasterSdPage(i, PageKind::Standard)->GetLayoutName());
 617             aOldLayoutName = aOldLayoutName.copy( 0, aOldLayoutName.indexOf( SD_LT_SEPARATOR ) );
 618             StyleSheetCopyResultVector aCreatedSheets;
 619             pNewStylePool->CopyLayoutSheets(aOldLayoutName, *pOldStylePool, aCreatedSheets );
 620         }
 621
 622         lcl_copyUserDefinedProperties(GetDocSh(), pNewDocSh);
 623
 624         pNewModel->NewOrLoadCompleted( DocCreationMode::Loaded );  // loaded from source document
 625     }
 626     else if( mbAllocDocSh )
 627     {
 628         // Create a DocShell which is then returned with GetAllocedDocSh()
 629         SdDrawDocument* pDoc = const_cast<SdDrawDocument*>(this);
 630         pDoc->SetAllocDocSh(false);
 631         pDoc->mxAllocedDocShRef = new ::sd::DrawDocShell(
 632             SfxObjectCreateMode::EMBEDDED, true, meDocType);
 633         pDoc->mxAllocedDocShRef->DoInitNew();
 634         pNewModel = pDoc->mxAllocedDocShRef->GetDoc();
 635     }
 636     else
 637     {
 638         pNewModel = new SdDrawDocument(meDocType, nullptr);
 639     }
 640
 641     return pNewModel;
 642 }
 643
 644 rtl::Reference<SdPage> SdDrawDocument::AllocSdPage(bool bMasterPage)
 645 {
 646     return new SdPage(*this, bMasterPage);
 647 }
 648
 649 // This method creates a new page (SdPage) and returns a pointer to said page.
 650 // The drawing engine uses this method to create pages (whose types it does
 651 // not know, as they are _derivatives_ of SdrPage) when loading.
 652 rtl::Reference<SdrPage> SdDrawDocument::AllocPage(bool bMasterPage)
 653 {
 654     return AllocSdPage(bMasterPage);
 655 }
 656
 657 // When the model has changed
 658 void SdDrawDocument::SetChanged(bool bFlag)
 659 {
 660     if (mpDocSh)
 661     {
 662         if (mbNewOrLoadCompleted && mpDocSh->IsEnableSetModified())
 663         {
 664             // Pass on to base class
 665             FmFormModel::SetChanged(bFlag);
 666
 667             // Forward to ObjectShell
 668             mpDocSh->SetModified(bFlag);
 669         }
 670     }
 671     else
 672     {
 673         // Pass on to base class
 674         FmFormModel::SetChanged(bFlag);
 675     }
 676 }
 677
 678 // The model changed, don't call anything else
 679 void SdDrawDocument::NbcSetChanged(bool bFlag)
 680 {
 681     // forward to baseclass
 682     FmFormModel::SetChanged(bFlag);
 683 }
 684
 685 // NewOrLoadCompleted is called when the document is loaded, or when it is clear
 686 // it won't load any more.
 687 void SdDrawDocument::NewOrLoadCompleted(DocCreationMode eMode)
 688 {
 689     if (eMode == DocCreationMode::New)
 690     {
 691         // New document:
 692         // create slideshow and default templates,
 693         // create pool for virtual controls
 694         CreateLayoutTemplates();
 695         CreateDefaultCellStyles();
 696
 697         static_cast< SdStyleSheetPool* >( mxStyleSheetPool.get() )->CreatePseudosIfNecessary();
 698     }
 699     else if (eMode == DocCreationMode::Loaded)
 700     {
 701             // Document has finished loading
 702
 703         CheckMasterPages();
 704
 705         if ( GetMasterSdPageCount(PageKind::Standard) > 1 )
 706             RemoveUnnecessaryMasterPages( nullptr, true, false );
 707
 708         for ( sal_uInt16 i = 0; i < GetPageCount(); i++ )
 709         {
 710             // Check for correct layout names
 711             SdPage* pPage = static_cast<SdPage*>( GetPage( i ) );
 712
 713             if(pPage->TRG_HasMasterPage())
 714             {
 715                 SdPage& rMaster = static_cast<SdPage&>(pPage->TRG_GetMasterPage() );
 716
 717                 if(rMaster.GetLayoutName() != pPage->GetLayoutName())
 718                 {
 719                     pPage->SetLayoutName(rMaster.GetLayoutName());
 720                 }
 721             }
 722         }
 723
 724         for ( sal_uInt16 nPage = 0; nPage < GetMasterPageCount(); nPage++)
 725         {
 726             // LayoutName and PageName must be the same
 727             SdPage* pPage = static_cast<SdPage*>( GetMasterPage( nPage ) );
 728
 729             OUString aName( pPage->GetLayoutName() );
 730             aName = aName.copy( 0, aName.indexOf( SD_LT_SEPARATOR ) );
 731
 732             if( aName != pPage->GetName() )
 733                 pPage->SetName( aName );
 734         }
 735
 736         // Create names of the styles in the user's language
 737         static_cast<SdStyleSheetPool*>(mxStyleSheetPool.get())->UpdateStdNames();
 738
 739         // Create any missing styles - eg. formerly, there was no Subtitle style
 740         static_cast<SdStyleSheetPool*>(mxStyleSheetPool.get())->CreatePseudosIfNecessary();
 741     }
 742
 743     // Set default style of Drawing Engine
 744     OUString aName( SdResId(STR_STANDARD_STYLESHEET_NAME));
 745     SetDefaultStyleSheet(static_cast<SfxStyleSheet*>(mxStyleSheetPool->Find(aName, SfxStyleFamily::Para)));
 746
 747     // #i119287# Set default StyleSheet for SdrGrafObj and SdrOle2Obj
 748     SetDefaultStyleSheetForSdrGrafObjAndSdrOle2Obj(static_cast<SfxStyleSheet*>(mxStyleSheetPool->Find(SdResId(STR_POOLSHEET_OBJNOLINENOFILL), SfxStyleFamily::Para)));
 749
 750     // Initialize DrawOutliner and DocumentOutliner, but don't initialize the
 751     // global outliner, as it is not document specific like StyleSheetPool and
 752     // StyleRequestHandler are.
 753     ::Outliner& rDrawOutliner = GetDrawOutliner();
 754     rDrawOutliner.SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 755     EEControlBits nCntrl = rDrawOutliner.GetControlWord();
 756     if (mbOnlineSpell)
 757         nCntrl |= EEControlBits::ONLINESPELLING;
 758     else
 759         nCntrl &= ~EEControlBits::ONLINESPELLING;
 760     rDrawOutliner.SetControlWord(nCntrl);
 761
 762     // Initialize HitTestOutliner and DocumentOutliner, but don't initialize the
 763     // global outliner, as it is not document specific like StyleSheetPool and
 764     // StyleRequestHandler are.
 765     m_pHitTestOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 766
 767     if(mpOutliner)
 768     {
 769         mpOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 770     }
 771     if(mpInternalOutliner)
 772     {
 773         mpInternalOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 774     }
 775
 776     if ( eMode == DocCreationMode::Loaded )
 777     {
 778         // Make presentation objects listeners of the appropriate styles
 779         SdStyleSheetPool* pSPool = static_cast<SdStyleSheetPool*>( GetStyleSheetPool() );
 780         sal_uInt16 nPage, nPageCount;
 781
 782         // create missing layout style sheets for broken documents
 783         //         that were created with the 5.2
 784         nPageCount = GetMasterSdPageCount( PageKind::Standard );
 785         for (nPage = 0; nPage < nPageCount; nPage++)
 786         {
 787             SdPage* pPage = GetMasterSdPage(nPage, PageKind::Standard);
 788             pSPool->CreateLayoutStyleSheets( pPage->GetName(), true );
 789         }
 790
 791         // Default and notes pages:
 792         for (nPage = 0; nPage < GetPageCount(); nPage++)
 793         {
 794             SdPage* pPage = static_cast<SdPage*>(GetPage(nPage));
 795             NewOrLoadCompleted( pPage, pSPool );
 796         }
 797
 798         // Master pages:
 799         for (nPage = 0; nPage < GetMasterPageCount(); nPage++)
 800         {
 801             SdPage* pPage = static_cast<SdPage*>(GetMasterPage(nPage));
 802
 803             NewOrLoadCompleted( pPage, pSPool );
 804         }
 805     }
 806
 807     mbNewOrLoadCompleted = true;
 808     UpdateAllLinks();
 809     SetChanged( false );
 810 }
 811
 812 /** updates all links, only links in this document should by resolved */
 813 void SdDrawDocument::UpdateAllLinks()
 814 {
 815     if (s_pDocLockedInsertingLinks || !m_pLinkManager || m_pLinkManager->GetLinks().empty())
 816         return;
 817
 818     s_pDocLockedInsertingLinks = this; // lock inserting links. only links in this document should by resolved
 819
 820     if (mpDocSh)
 821     {
 822         comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = mpDocSh->getEmbeddedObjectContainer();
 823         rEmbeddedObjectContainer.setUserAllowsLinkUpdate(true);
 824     }
 825
 826     m_pLinkManager->UpdateAllLinks(true, false, nullptr);  // query box: update all links?
 827
 828     if (s_pDocLockedInsertingLinks == this)
 829         s_pDocLockedInsertingLinks = nullptr;  // unlock inserting links
 830 }
 831
 832 /** this loops over the presentation objects of a page and repairs some new settings
 833     from old binary files and resets all default strings for empty presentation objects.
 834 */
 835 void SdDrawDocument::NewOrLoadCompleted( SdPage* pPage, SdStyleSheetPool* pSPool )
 836 {
 837     sd::ShapeList& rPresentationShapes( pPage->GetPresentationShapeList() );
 838     if(rPresentationShapes.isEmpty())
 839         return;
 840
 841     // Create lists of title and outline styles
 842     OUString aName = pPage->GetLayoutName();
 843     aName = aName.copy( 0, aName.indexOf( SD_LT_SEPARATOR ) );
 844
 845     std::vector<SfxStyleSheetBase*> aOutlineList;
 846     pSPool->CreateOutlineSheetList(aName,aOutlineList);
 847
 848     SfxStyleSheet* pTitleSheet = static_cast<SfxStyleSheet*>(pSPool->GetTitleSheet(aName));
 849
 850     SdrObject* pObj = nullptr;
 851     rPresentationShapes.seekShape(0);
 852
 853     // Now look for title and outline text objects, then make those objects
 854     // listeners.
 855     while( (pObj = rPresentationShapes.getNextShape()) )
 856     {
 857         if (pObj->GetObjInventor() == SdrInventor::Default)
 858         {
 859             OutlinerParaObject* pOPO = pObj->GetOutlinerParaObject();
 860             sal_uInt16 nId = pObj->GetObjIdentifier();
 861
 862             if (nId == OBJ_TITLETEXT)
 863             {
 864                 if( pOPO && pOPO->GetOutlinerMode() == OutlinerMode::DontKnow )
 865                     pOPO->SetOutlinerMode( OutlinerMode::TitleObject );
 866
 867                 // sal_True: don't delete "hard" attributes when doing this.
 868                 if (pTitleSheet)
 869                     pObj->SetStyleSheet(pTitleSheet, true);
 870             }
 871             else if (nId == OBJ_OUTLINETEXT)
 872             {
 873                 if( pOPO && pOPO->GetOutlinerMode() == OutlinerMode::DontKnow )
 874                     pOPO->SetOutlinerMode( OutlinerMode::OutlineObject );
 875
 876                 std::vector<SfxStyleSheetBase*>::iterator iter;
 877                 for (iter = aOutlineList.begin(); iter != aOutlineList.end(); ++iter)
 878                 {
 879                     SfxStyleSheet* pSheet = static_cast<SfxStyleSheet*>(*iter);
 880
 881                     if (pSheet)
 882                     {
 883                         pObj->StartListening(*pSheet);
 884
 885                         if( iter == aOutlineList.begin())
 886                             // text frame listens to stylesheet of layer 1
 887                             pObj->NbcSetStyleSheet(pSheet, true);
 888                     }
 889                 }
 890             }
 891
 892             if( auto pTextObj = dynamic_cast<SdrTextObj *>( pObj ) )
 893                 if (pTextObj->IsEmptyPresObj())
 894                 {
 895                     PresObjKind ePresObjKind = pPage->GetPresObjKind(pObj);
 896                     OUString aString( pPage->GetPresObjText(ePresObjKind) );
 897
 898                     if (!aString.isEmpty())
 899                     {
 900                         SdOutliner* pInternalOutl = GetInternalOutliner();
 901                         pPage->SetObjText( pTextObj, pInternalOutl, ePresObjKind, aString );
 902                         pObj->NbcSetStyleSheet( pPage->GetStyleSheetForPresObj( ePresObjKind ), true );
 903                         pInternalOutl->Clear();
 904                     }
 905                 }
 906         }
 907     }
 908 }
 909
 910 // Local outliner that is used for outline mode. In this outliner, OutlinerViews
 911 // may be inserted.
 912 SdOutliner* SdDrawDocument::GetOutliner(bool bCreateOutliner)
 913 {
 914     if (!mpOutliner && bCreateOutliner)
 915     {
 916         mpOutliner.reset(new SdOutliner( this, OutlinerMode::TextObject ));
 917
 918         if (mpDocSh)
 919             mpOutliner->SetRefDevice( SD_MOD()->GetVirtualRefDevice() );
 920
 921         mpOutliner->SetDefTab( m_nDefaultTabulator );
 922         mpOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 923     }
 924
 925     return mpOutliner.get();
 926 }
 927
 928 // Internal outliner that is used to create text objects. We don't insert any
 929 // OutlinerViews into this outliner!
 930 SdOutliner* SdDrawDocument::GetInternalOutliner(bool bCreateOutliner)
 931 {
 932     if ( !mpInternalOutliner && bCreateOutliner )
 933     {
 934         mpInternalOutliner.reset( new SdOutliner( this, OutlinerMode::TextObject ) );
 935
 936         // This outliner is only used to create special text objects. As no
 937         // information about portions is saved in this outliner, the update mode
 938         // can/should always remain sal_False.
 939         mpInternalOutliner->SetUpdateLayout( false );
 940         mpInternalOutliner->EnableUndo( false );
 941
 942         if (mpDocSh)
 943             mpInternalOutliner->SetRefDevice( SD_MOD()->GetVirtualRefDevice() );
 944
 945         mpInternalOutliner->SetDefTab( m_nDefaultTabulator );
 946         mpInternalOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
 947     }
 948
 949     DBG_ASSERT( !mpInternalOutliner || ( ! mpInternalOutliner->IsUpdateLayout() ) , "InternalOutliner: UpdateMode = sal_True !" );
 950     DBG_ASSERT( !mpInternalOutliner || ( ! mpInternalOutliner->IsUndoEnabled() ), "InternalOutliner: Undo = sal_True !" );
 951
 952     // If you add stuff here, always clear it out.
 953     // Advantages:
 954     // a) no unnecessary Clear calls
 955     // b) no wasted memory
 956     DBG_ASSERT( !mpInternalOutliner || ( ( mpInternalOutliner->GetParagraphCount() == 1 ) && ( mpInternalOutliner->GetText( mpInternalOutliner->GetParagraph( 0 ) ).isEmpty() ) ), "InternalOutliner: not empty!" );
 957
 958     return mpInternalOutliner.get();
 959 }
 960
 961 // OnlineSpelling on/off
 962 void SdDrawDocument::SetOnlineSpell(bool bIn)
 963 {
 964     mbOnlineSpell = bIn;
 965     EEControlBits nCntrl;
 966
 967     if(mpOutliner)
 968     {
 969         nCntrl = mpOutliner->GetControlWord();
 970
 971         if(mbOnlineSpell)
 972             nCntrl |= EEControlBits::ONLINESPELLING;
 973         else
 974             nCntrl &= ~EEControlBits::ONLINESPELLING;
 975
 976         mpOutliner->SetControlWord(nCntrl);
 977     }
 978
 979     if (mpInternalOutliner)
 980     {
 981         nCntrl = mpInternalOutliner->GetControlWord();
 982
 983         if (mbOnlineSpell)
 984             nCntrl |= EEControlBits::ONLINESPELLING;
 985         else
 986             nCntrl &= ~EEControlBits::ONLINESPELLING;
 987
 988         mpInternalOutliner->SetControlWord(nCntrl);
 989     }
 990
 991     ::Outliner& rOutliner = GetDrawOutliner();
 992
 993     nCntrl = rOutliner.GetControlWord();
 994
 995     if (mbOnlineSpell)
 996         nCntrl |= EEControlBits::ONLINESPELLING;
 997     else
 998         nCntrl &= ~EEControlBits::ONLINESPELLING;
 999
1000     rOutliner.SetControlWord(nCntrl);
1001
1002     if (mbOnlineSpell)
1003     {
1004         StartOnlineSpelling();
1005     }
1006     else
1007     {
1008         StopOnlineSpelling();
1009     }
1010 }
1011
1012 // OnlineSpelling: highlighting on/off
1013 uno::Reference< uno::XInterface > SdDrawDocument::createUnoModel()
1014 {
1015     uno::Reference< uno::XInterface > xModel;
1016
1017     try
1018     {
1019         if ( mpDocSh )
1020             xModel = mpDocSh->GetModel();
1021     }
1022     catch( uno::RuntimeException& )
1023     {
1024     }
1025
1026     return xModel;
1027 }
1028
1029 SvxNumType SdDrawDocument::GetPageNumType() const
1030 {
1031     return mePageNumType;
1032 }
1033
1034 void SdDrawDocument::SetPrinterIndependentLayout (sal_Int32 nMode)
1035 {
1036     switch (nMode)
1037     {
1038         case css::document::PrinterIndependentLayout::DISABLED:
1039         case css::document::PrinterIndependentLayout::ENABLED:
1040             // Just store supported modes and inform the doc shell
1041             mnPrinterIndependentLayout = nMode;
1042
1043             // Since it is possible that a SdDrawDocument is constructed without a
1044             // SdDrawDocShell the pointer member mpDocSh needs to be tested
1045             // before the call is executed. This is e. g. used for copy/paste.
1046             if(mpDocSh)
1047             {
1048                 mpDocSh->UpdateRefDevice ();
1049             }
1050
1051             break;
1052
1053         default:
1054             // Ignore unknown values
1055             break;
1056     }
1057 }
1058
1059 void SdDrawDocument::SetStartWithPresentation( bool bStartWithPresentation )
1060 {
1061     mbStartWithPresentation = bStartWithPresentation;
1062 }
1063
1064 void SdDrawDocument::SetExitAfterPresenting( bool bExitAfterPresenting )
1065 {
1066     mbExitAfterPresenting = bExitAfterPresenting;
1067 }
1068
1069 void SdDrawDocument::PageListChanged()
1070 {
1071     mpDrawPageListWatcher->Invalidate();
1072 }
1073
1074 void SdDrawDocument::MasterPageListChanged()
1075 {
1076     mpMasterPageListWatcher->Invalidate();
1077 }
1078
1079 void SdDrawDocument::SetCalcFieldValueHdl(::Outliner* pOutliner)
1080 {
1081     pOutliner->SetCalcFieldValueHdl(LINK(SD_MOD(), SdModule, CalcFieldValueHdl));
1082 }
1083
1084 sal_uInt16 SdDrawDocument::GetAnnotationAuthorIndex( const OUString& rAuthor )
1085 {
1086     // force current user to have first color
1087     if( maAnnotationAuthors.empty() )
1088     {
1089         SvtUserOptions aUserOptions;
1090         maAnnotationAuthors.push_back( aUserOptions.GetFullName() );
1091     }
1092
1093     auto iter = std::find(maAnnotationAuthors.begin(), maAnnotationAuthors.end(), rAuthor);
1094     sal_uInt16 idx = static_cast<sal_uInt16>(std::distance(maAnnotationAuthors.begin(), iter));
1095
1096     if( idx == maAnnotationAuthors.size() )
1097     {
1098         maAnnotationAuthors.push_back( rAuthor );
1099     }
1100
1101     return idx;
1102 }
1103
1104 void SdDrawDocument::InitLayoutVector()
1105 {
1106     if (utl::ConfigManager::IsFuzzing())
1107         return;
1108
1109     const Reference<css::uno::XComponentContext> xContext(
1110         ::comphelper::getProcessComponentContext() );
1111
1112     // get file list from configuration
1113     const Sequence< OUString > aFiles(
1114         officecfg::Office::Impress::Misc::LayoutListFiles::get(xContext) );
1115
1116     OUString sFilename;
1117     for( const auto& rFile : aFiles )
1118     {
1119         sFilename = comphelper::getExpandedUri(xContext, rFile);
1120
1121         // load layout file into DOM
1122         Reference< XMultiServiceFactory > xServiceFactory(
1123             xContext->getServiceManager() , UNO_QUERY_THROW );
1124         const Reference<XDocumentBuilder> xDocBuilder(
1125             DocumentBuilder::create( comphelper::getComponentContext (xServiceFactory) ));
1126
1127         try
1128         {
1129             // loop over every layout entry in current file
1130             const Reference<XDocument> xDoc = xDocBuilder->parseURI( sFilename );
1131             const Reference<XNodeList> layoutlist = xDoc->getElementsByTagName("layout");
1132             const int nElements = layoutlist->getLength();
1133             for(int index=0; index < nElements; index++)
1134                 maLayoutInfo.push_back( layoutlist->item(index) );
1135         }
1136         catch (const uno::Exception &)
1137         {
1138             // skip missing config. files
1139         }
1140     }
1141 }
1142
1143 void SdDrawDocument::InitObjectVector()
1144 {
1145     if (utl::ConfigManager::IsFuzzing())
1146         return;
1147
1148     const Reference<css::uno::XComponentContext> xContext(
1149         ::comphelper::getProcessComponentContext() );
1150
1151     // get file list from configuration
1152     const Sequence< OUString > aFiles(
1153        officecfg::Office::Impress::Misc::PresObjListFiles::get(xContext) );
1154
1155     OUString sFilename;
1156     for( const auto& rFile : aFiles )
1157     {
1158         sFilename = comphelper::getExpandedUri(xContext, rFile);
1159
1160         // load presentation object file into DOM
1161         Reference< XMultiServiceFactory > xServiceFactory(
1162             xContext->getServiceManager() , UNO_QUERY_THROW );
1163         const Reference<XDocumentBuilder> xDocBuilder(
1164             DocumentBuilder::create( comphelper::getComponentContext (xServiceFactory) ));
1165
1166         try
1167         {
1168             // loop over every object entry in current file
1169             const Reference<XDocument> xDoc = xDocBuilder->parseURI( sFilename );
1170             const Reference<XNodeList> objectlist = xDoc->getElementsByTagName("object");
1171             const int nElements = objectlist->getLength();
1172             for(int index=0; index < nElements; index++)
1173                 maPresObjectInfo.push_back( objectlist->item(index) );
1174         }
1175         catch (const uno::Exception &)
1176         {
1177             // skip missing config. files
1178         }
1179     }
1180 }
1181
1182 void SdDrawDocument::dumpAsXml(xmlTextWriterPtr pWriter) const
1183 {
1184     bool bOwns = false;
1185     if (!pWriter)
1186     {
1187         pWriter = xmlNewTextWriterFilename("model.xml", 0);
1188         xmlTextWriterSetIndent(pWriter,1);
1189         (void)xmlTextWriterSetIndentString(pWriter, BAD_CAST("  "));
1190         (void)xmlTextWriterStartDocument(pWriter, nullptr, nullptr, nullptr);
1191         bOwns = true;
1192     }
1193     (void)xmlTextWriterStartElement(pWriter, BAD_CAST("SdDrawDocument"));
1194     (void)xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
1195
1196     if (mpOutliner)
1197         mpOutliner->dumpAsXml(pWriter);
1198     FmFormModel::dumpAsXml(pWriter);
1199     if (GetUndoManager())
1200         GetUndoManager()->dumpAsXml(pWriter);
1201
1202     (void)xmlTextWriterEndElement(pWriter);
1203     if (bOwns)
1204     {
1205         (void)xmlTextWriterEndDocument(pWriter);
1206         xmlFreeTextWriter(pWriter);
1207     }
1208 }
1209
1210 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */