cui/source/options/optbasic.cxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #include "optbasic.hxx"
  21 #include <basic/codecompletecache.hxx>
  22 #include <officecfg/Office/BasicIDE.hxx>
  23
  24 SvxBasicIDEOptionsPage::SvxBasicIDEOptionsPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet)
  25     : SfxTabPage(pPage, pController, u"cui/ui/optbasicidepage.ui"_ustr, u"OptBasicIDEPage"_ustr, &rSet)
  26     , m_xCodeCompleteChk(m_xBuilder->weld_check_button(u"codecomplete_enable"_ustr))
  27     , m_xAutocloseProcChk(m_xBuilder->weld_check_button(u"autoclose_proc"_ustr))
  28     , m_xAutocloseParenChk(m_xBuilder->weld_check_button(u"autoclose_paren"_ustr))
  29     , m_xAutocloseQuotesChk(m_xBuilder->weld_check_button(u"autoclose_quotes"_ustr))
  30     , m_xAutoCorrectChk(m_xBuilder->weld_check_button(u"autocorrect"_ustr))
  31     , m_xUseExtendedTypesChk(m_xBuilder->weld_check_button(u"extendedtypes_enable"_ustr))
  32 {
  33     LoadConfig();
  34 }
  35
  36 SvxBasicIDEOptionsPage::~SvxBasicIDEOptionsPage()
  37 {
  38 }
  39
  40 void SvxBasicIDEOptionsPage::LoadConfig()
  41 {
  42     m_xCodeCompleteChk->set_active( officecfg::Office::BasicIDE::Autocomplete::CodeComplete::get() );
  43     m_xCodeCompleteChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::CodeComplete::isReadOnly() );
  44     m_xAutocloseProcChk->set_active( officecfg::Office::BasicIDE::Autocomplete::AutocloseProc::get() );
  45     m_xAutocloseProcChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::AutocloseProc::isReadOnly() );
  46     m_xAutocloseQuotesChk->set_active( officecfg::Office::BasicIDE::Autocomplete::AutocloseDoubleQuotes::get() );
  47     m_xAutocloseQuotesChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::AutocloseDoubleQuotes::isReadOnly() );
  48     m_xAutocloseParenChk->set_active( officecfg::Office::BasicIDE::Autocomplete::AutocloseParenthesis::get() );
  49     m_xAutocloseParenChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::AutocloseParenthesis::isReadOnly() );
  50     m_xAutoCorrectChk->set_active( officecfg::Office::BasicIDE::Autocomplete::AutoCorrect::get() );
  51     m_xAutoCorrectChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::AutoCorrect::isReadOnly() );
  52     m_xUseExtendedTypesChk->set_active( officecfg::Office::BasicIDE::Autocomplete::UseExtended::get() );
  53     m_xUseExtendedTypesChk->set_sensitive( !officecfg::Office::BasicIDE::Autocomplete::UseExtended::isReadOnly() );
  54 }
  55
  56 OUString SvxBasicIDEOptionsPage::GetAllStrings()
  57 {
  58     OUString sAllStrings;
  59     OUString labels[] = { u"label1"_ustr, u"label2"_ustr, u"label3"_ustr };
  60
  61     for (const auto& label : labels)
  62     {
  63         if (const auto pString = m_xBuilder->weld_label(label))
  64             sAllStrings += pString->get_label() + " ";
  65     }
  66
  67     OUString checkButton[] = { u"codecomplete_enable"_ustr, u"autocorrect"_ustr,    u"autoclose_quotes"_ustr,
  68                                u"autoclose_paren"_ustr,     u"autoclose_proc"_ustr, u"extendedtypes_enable"_ustr };
  69
  70     for (const auto& check : checkButton)
  71     {
  72         if (const auto pString = m_xBuilder->weld_check_button(check))
  73             sAllStrings += pString->get_label() + " ";
  74     }
  75
  76     return sAllStrings.replaceAll("_", "");
  77 }
  78
  79 bool SvxBasicIDEOptionsPage::FillItemSet( SfxItemSet* /*rCoreSet*/ )
  80 {
  81     bool bModified = false;
  82     std::shared_ptr< comphelper::ConfigurationChanges > batch( comphelper::ConfigurationChanges::create() );
  83
  84     if( m_xAutocloseProcChk->get_state_changed_from_saved() )
  85     {
  86         officecfg::Office::BasicIDE::Autocomplete::AutocloseProc::set( m_xAutocloseProcChk->get_active(), batch );
  87         CodeCompleteOptions::SetProcedureAutoCompleteOn( m_xAutocloseProcChk->get_active() );
  88         bModified = true;
  89     }
  90
  91     if( m_xCodeCompleteChk->get_state_changed_from_saved() )
  92     {
  93         //std::shared_ptr< comphelper::ConfigurationChanges > batch( comphelper::ConfigurationChanges::create() );
  94         officecfg::Office::BasicIDE::Autocomplete::CodeComplete::set( m_xCodeCompleteChk->get_active(), batch );
  95         CodeCompleteOptions::SetCodeCompleteOn( m_xCodeCompleteChk->get_active() );
  96         bModified = true;
  97     }
  98
  99     if( m_xUseExtendedTypesChk->get_state_changed_from_saved() )
 100     {
 101         officecfg::Office::BasicIDE::Autocomplete::UseExtended::set( m_xUseExtendedTypesChk->get_active(), batch );
 102         CodeCompleteOptions::SetExtendedTypeDeclaration( m_xUseExtendedTypesChk->get_active() );
 103         bModified = true;
 104     }
 105
 106     if( m_xAutocloseParenChk->get_state_changed_from_saved() )
 107     {
 108         officecfg::Office::BasicIDE::Autocomplete::AutocloseParenthesis::set( m_xAutocloseParenChk->get_active(), batch );
 109         CodeCompleteOptions::SetAutoCloseParenthesisOn( m_xAutocloseParenChk->get_active() );
 110         bModified = true;
 111     }
 112
 113     if( m_xAutocloseQuotesChk->get_state_changed_from_saved() )
 114     {
 115         officecfg::Office::BasicIDE::Autocomplete::AutocloseDoubleQuotes::set( m_xAutocloseQuotesChk->get_active(), batch );
 116         CodeCompleteOptions::SetAutoCloseQuotesOn( m_xAutocloseQuotesChk->get_active() );
 117         bModified = true;
 118     }
 119
 120     if( m_xAutoCorrectChk->get_state_changed_from_saved() )
 121     {
 122         officecfg::Office::BasicIDE::Autocomplete::AutoCorrect::set( m_xAutoCorrectChk->get_active(), batch );
 123         CodeCompleteOptions::SetAutoCorrectOn( m_xAutoCorrectChk->get_active() );
 124         bModified = true;
 125     }
 126
 127     if( bModified )
 128         batch->commit();
 129
 130     return bModified;
 131 }
 132
 133 void SvxBasicIDEOptionsPage::Reset( const SfxItemSet* /*rSet*/ )
 134 {
 135     LoadConfig();
 136     m_xCodeCompleteChk->save_state();
 137     m_xAutocloseProcChk->save_state();
 138     m_xAutocloseQuotesChk->save_state();
 139     m_xAutocloseParenChk->save_state();
 140     m_xAutoCorrectChk->save_state();
 141     m_xUseExtendedTypesChk->save_state();
 142 }
 143
 144 std::unique_ptr<SfxTabPage> SvxBasicIDEOptionsPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrSet )
 145 {
 146     return std::make_unique<SvxBasicIDEOptionsPage>(pPage, pController, *rAttrSet);
 147 }
 148
 149 void SvxBasicIDEOptionsPage::FillUserData()
 150 {
 151     SetUserData( OUString() );
 152 }
 153
 154 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */