include/svx/lathe3d.hxx

   1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
   2 /*
   3  * This file is part of the LibreOffice project.
   4  *
   5  * This Source Code Form is subject to the terms of the Mozilla Public
   6  * License, v. 2.0. If a copy of the MPL was not distributed with this
   7  * file, You can obtain one at http://mozilla.org/MPL/2.0/.
   8  *
   9  * This file incorporates work covered by the following license notice:
  10  *
  11  *   Licensed to the Apache Software Foundation (ASF) under one or more
  12  *   contributor license agreements. See the NOTICE file distributed
  13  *   with this work for additional information regarding copyright
  14  *   ownership. The ASF licenses this file to you under the Apache
  15  *   License, Version 2.0 (the "License"); you may not use this file
  16  *   except in compliance with the License. You may obtain a copy of
  17  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  18  */
  19
  20 #ifndef INCLUDED_SVX_LATHE3D_HXX
  21 #define INCLUDED_SVX_LATHE3D_HXX
  22
  23 #include <svl/intitem.hxx>
  24 #include <svl/itemset.hxx>
  25 #include <svx/obj3d.hxx>
  26 #include <svx/svxdllapi.h>
  27 #include <svx/svddef.hxx>
  28 #include <svx/svx3ditems.hxx>
  29
  30 class E3dDefaultAttributes;
  31
  32 /*************************************************************************
  33 |*
  34 |* Create a 3D rotation object from a passed 2D polygon
  35 |*
  36 |* The aPolyPoly3D is rotated around its axis in nHSegments steps.
  37 |* nVSegments contains the number of lines of aPolyPoly3D and therefore
  38 |* is effectively a vertical segmentation.
  39 |*
  40 \************************************************************************/
  41
  42 class E3dLatheObj final : public E3dCompoundObject
  43 {
  44     basegfx::B2DPolyPolygon maPolyPoly2D;
  45
  46     virtual std::unique_ptr<sdr::contact::ViewContact> CreateObjectSpecificViewContact() override;
  47     virtual std::unique_ptr<sdr::properties::BaseProperties> CreateObjectSpecificProperties() override;
  48     void SetDefaultAttributes(const E3dDefaultAttributes& rDefault);
  49
  50 private:
  51     // protected destructor - due to final, make private
  52     virtual ~E3dLatheObj() override;
  53
  54 public:
  55     SVXCORE_DLLPUBLIC E3dLatheObj(
  56         SdrModel& rSdrModel,
  57         const E3dDefaultAttributes& rDefault,
  58         basegfx::B2DPolyPolygon aPoly2D);
  59     E3dLatheObj(SdrModel& rSdrModel, E3dLatheObj const & rSource);
  60     E3dLatheObj(SdrModel& rSdrModel);
  61
  62     // HorizontalSegments:
  63     sal_uInt32 GetHorizontalSegments() const
  64         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_HORZ_SEGS).GetValue(); }
  65
  66     // VerticalSegments:
  67     sal_uInt32 GetVerticalSegments() const
  68         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_VERT_SEGS).GetValue(); }
  69
  70     // PercentDiagonal: 0..100, before 0.0..0.5
  71     sal_uInt16 GetPercentDiagonal() const
  72         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_PERCENT_DIAGONAL).GetValue(); }
  73
  74     // BackScale: 0..100, before 0.0..1.0
  75     sal_uInt16 GetBackScale() const
  76         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_BACKSCALE).GetValue(); }
  77
  78     // EndAngle: 0..10000
  79     sal_uInt32 GetEndAngle() const
  80         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_END_ANGLE).GetValue(); }
  81
  82     // #107245# GetSmoothNormals() for bLatheSmoothed
  83     bool GetSmoothNormals() const
  84         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_SMOOTH_NORMALS).GetValue(); }
  85
  86     // #107245# GetSmoothLids() for bLatheSmoothFrontBack
  87     bool GetSmoothLids() const
  88         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_SMOOTH_LIDS).GetValue(); }
  89
  90     // #107245# GetCharacterMode() for bLatheCharacterMode
  91     bool GetCharacterMode() const
  92         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_CHARACTER_MODE).GetValue(); }
  93
  94     // #107245# GetCloseFront() for bLatheCloseFront
  95     bool GetCloseFront() const
  96         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_CLOSE_FRONT).GetValue(); }
  97
  98     // #107245# GetCloseBack() for bLatheCloseBack
  99     bool GetCloseBack() const
 100         { return GetObjectItemSet().Get(SDRATTR_3DOBJ_CLOSE_BACK).GetValue(); }
 101
 102     virtual SdrObjKind GetObjIdentifier() const override;
 103
 104     virtual rtl::Reference<SdrObject> CloneSdrObject(SdrModel& rTargetModel) const override;
 105
 106     virtual rtl::Reference<SdrObject> DoConvertToPolyObj(bool bBezier, bool bAddText) const override;
 107
 108     // TakeObjName...() is for the display in the UI, for example "3 frames selected".
 109     virtual OUString TakeObjNameSingul() const override;
 110     virtual OUString TakeObjNamePlural() const override;
 111
 112     // set/get local parameters with geometry recreation
 113     void SetPolyPoly2D(const basegfx::B2DPolyPolygon& rNew);
 114     const basegfx::B2DPolyPolygon& GetPolyPoly2D() const { return maPolyPoly2D; }
 115
 116     // break up
 117     virtual bool IsBreakObjPossible() override;
 118     virtual rtl::Reference<SdrAttrObj> GetBreakObj() override;
 119 };
 120
 121 #endif // INCLUDED_SVX_LATHE3D_HXX
 122
 123 /* vim:set shiftwidth=4 softtabstop=4 expandtab: */