tdf#130857 qt weld: Implement QtInstanceWidget::strip_mnemonic

[LibreOffice.git] / instsetoo_native / inc_openoffice / windows / msi_languages / Error.ulf

/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

[OOO_ERROR_1]
en-US = "{{Fatal error: }}"

[OOO_ERROR_2]
en-US = "Error [1]."

[OOO_ERROR_3]
en-US = "Warning [1]."

[OOO_ERROR_4]
en-US = "Info [1]."

[OOO_ERROR_5]
en-US = "Internal Error [1]. [2]{, [3]}{, [4]}"

[OOO_ERROR_6]
en-US = "{{Disk full: }}"

[OOO_ERROR_7]
en-US = "Action [Time]: [1]. [2]"

[OOO_ERROR_8]
en-US = "[ProductName]"

[OOO_ERROR_9]
en-US = "{[2]}{, [3]}{, [4]}"

[OOO_ERROR_10]
en-US = "Message type: [1], Argument: [2]"

[OOO_ERROR_11]
en-US = "=== Logging started: [Date]  [Time] ==="

[OOO_ERROR_12]
en-US = "=== Logging stopped: [Date]  [Time] ==="

[OOO_ERROR_13]
en-US = "Action start [Time]: [1]."

[OOO_ERROR_14]
en-US = "Action ended [Time]: [1]. Return value [2]."

[OOO_ERROR_15]
en-US = "Time remaining: {[1] minutes }{[2] seconds}"

[OOO_ERROR_16]
en-US = "Out of memory. Shut down other applications before retrying."

[OOO_ERROR_17]
en-US = "Installer is no longer responding."

[OOO_ERROR_18]
en-US = "Installer terminated prematurely."

[OOO_ERROR_19]
en-US = "Please wait while Windows configures [ProductName]"

[OOO_ERROR_20]
en-US = "Gathering required information..."

[OOO_ERROR_21]
en-US = "Removing older versions of this application"

[OOO_ERROR_22]
en-US = "Preparing to remove older versions of this application"

[OOO_ERROR_23]
en-US = "{[ProductName] }Setup completed successfully."

[OOO_ERROR_24]
en-US = "{[ProductName] }Setup failed."

[OOO_ERROR_25]
en-US = "Error reading from file: [2]. {{ System error [3].}}  Verify that the file exists and that you can access it."

[OOO_ERROR_26]
en-US = "Cannot create the file [3].  A directory with this name already exists.  Cancel the installation and try installing to a different location."

[OOO_ERROR_27]
en-US = "Please insert the disk: [2]"

[OOO_ERROR_28]
en-US = "The installer has insufficient privileges to access this directory: [2].  The installation cannot continue.  Log on as an administrator or contact your system administrator."

[OOO_ERROR_29]
en-US = "Error writing to file [2].  Verify that you have access to that directory."

[OOO_ERROR_30]
en-US = "Error reading from file [2].  Verify that the file exists and that you can access it."

[OOO_ERROR_31]
en-US = "Another application has exclusive access to the file [2].  Please shut down all other applications, then click Retry."

[OOO_ERROR_32]
en-US = "There is not enough disk space to install the file [2].  Free some disk space and click Retry, or click Cancel to exit."

[OOO_ERROR_33]
en-US = "Source file not found: [2].  Verify that the file exists and that you can access it."

[OOO_ERROR_34]
en-US = "Error reading from file: [3]. {{ System error [2].}}  Verify that the file exists and that you can access it."

[OOO_ERROR_35]
en-US = "Error writing to file: [3]. {{ System error [2].}}  Verify that you have access to that directory."

[OOO_ERROR_36]
en-US = "Source file not found{{(cabinet)}}: [2].  Verify that the file exists and that you can access it."

[OOO_ERROR_37]
en-US = "Cannot create the directory [2].  A file with this name already exists.  Please rename or remove the file and click Retry, or click Cancel to exit."

[OOO_ERROR_38]
en-US = "The volume [2] is currently unavailable.  Please select another."

[OOO_ERROR_39]
en-US = "The specified path [2] is unavailable."

[OOO_ERROR_40]
en-US = "Unable to write to the specified folder [2]."

[OOO_ERROR_41]
en-US = "A network error occurred while attempting to read from the file [2]"

[OOO_ERROR_42]
en-US = "An error occurred while attempting to create the directory [2]"

[OOO_ERROR_43]
en-US = "A network error occurred while attempting to create the directory [2]"

[OOO_ERROR_44]
en-US = "A network error occurred while attempting to open the source file cabinet [2]."

[OOO_ERROR_45]
en-US = "The specified path is too long [2]."

[OOO_ERROR_46]
en-US = "The Installer has insufficient privileges to modify the file [2]."

[OOO_ERROR_47]
en-US = "A portion of the path [2] exceeds the length allowed by the system."

[OOO_ERROR_48]
en-US = "The path [2] contains words that are not valid in folders."

[OOO_ERROR_49]
en-US = "The path [2] contains an invalid character."

[OOO_ERROR_50]
en-US = "[2] is not a valid short file name."

[OOO_ERROR_51]
en-US = "Error getting file security: [3] GetLastError: [2]"

[OOO_ERROR_52]
en-US = "Invalid Drive: [2]"

[OOO_ERROR_53]
en-US = "Error applying patch to file [2].  It has probably been updated by other means, and can no longer be modified by this patch.  For more information contact your patch vendor.  {{System Error: [3]}}"

[OOO_ERROR_54]
en-US = "Could not create key [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_55]
en-US = "Could not open key: [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_56]
en-US = "Could not delete value [2] from key [3]. {{ System error [4].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_57]
en-US = "Could not delete key [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_58]
en-US = "Could not read value [2] from key [3]. {{ System error [4].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_59]
en-US = "Could not write value [2] to key [3]. {{ System error [4].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_60]
en-US = "Could not get value names for key [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_61]
en-US = "Could not get sub key names for key [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_62]
en-US = "Could not read security information for key [2]. {{ System error [3].}}  Verify that you have sufficient access to that key, or contact your support personnel."

[OOO_ERROR_63]
en-US = "Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application."

[OOO_ERROR_64]
en-US = "Another installation is in progress. You must complete that installation before continuing this one."

[OOO_ERROR_65]
en-US = "Error accessing secured data. Please make sure the Windows Installer is configured properly and try the installation again."

[OOO_ERROR_66]
en-US = "User [2] has previously initiated an installation for product [3].  That user will need to run that installation again before using that product.  Your current installation will now continue."

[OOO_ERROR_67]
en-US = "User [2] has previously initiated an installation for product [3].  That user will need to run that installation again before using that product."

[OOO_ERROR_68]
en-US = "Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB.  Free some disk space and retry."

[OOO_ERROR_69]
en-US = "Are you sure you want to cancel?"

[OOO_ERROR_70]
en-US = "The file [2][3] is being held in use {by the following process: Name: [4], ID: [5], Window Title: [6]}.  Close that application and retry."

[OOO_ERROR_71]
en-US = "The product [2] is already installed, preventing the installation of this product.  The two products are incompatible."

[OOO_ERROR_72]
en-US = "Out of disk space -- Volume: [2]; required space: [3] KB; available space: [4] KB.  If rollback is disabled, enough space is available. Click Abort to quit, Retry to check available disk space again, or Ignore to continue without rollback."

[OOO_ERROR_73]
en-US = "Could not access network location [2]."

[OOO_ERROR_74]
en-US = "The following applications should be closed before continuing the installation:"

[OOO_ERROR_75]
en-US = "Could not find any previously installed compliant products on the machine for installing this product."

[OOO_ERROR_76]
en-US = "The key [2] is not valid.  Verify that you entered the correct key."

[OOO_ERROR_77]
en-US = "The installer must restart your system before configuration of [2] can continue.  Click Yes to restart now or No if you plan to restart later."

[OOO_ERROR_78]
en-US = "You must restart your system for the configuration changes made to [2] to take effect. Click Yes to restart now or No if you plan to restart later."

[OOO_ERROR_79]
en-US = "An installation for [2] is currently suspended.  You must undo the changes made by that installation to continue.  Do you want to undo those changes?"

[OOO_ERROR_80]
en-US = "A previous installation for this product is in progress.  You must undo the changes made by that installation to continue.  Do you want to undo those changes?"

[OOO_ERROR_81]
en-US = "No valid source could be found for product [2].  The Windows Installer cannot continue."

[OOO_ERROR_82]
en-US = "Installation operation completed successfully."

[OOO_ERROR_83]
en-US = "Installation operation failed."

[OOO_ERROR_84]
en-US = "Product: [2] -- [3]"

[OOO_ERROR_85]
en-US = "You may either restore your computer to its previous state or continue the installation later. Would you like to restore?"

[OOO_ERROR_86]
en-US = "An error occurred while writing installation information to disk.  Check to make sure enough disk space is available, and click Retry, or Cancel to end the installation."

[OOO_ERROR_87]
en-US = "One or more of the files required to restore your computer to its previous state could not be found.  Restoration will not be possible."

[OOO_ERROR_88]
en-US = "[2] cannot install one of its required products. Contact your technical support group.  {{System Error: [3].}}"

[OOO_ERROR_89]
en-US = "The older version of [2] cannot be removed.  Contact your technical support group.  {{System Error [3].}}"

[OOO_ERROR_90]
en-US = "The path [2] is not valid.  Please specify a valid path."

[OOO_ERROR_91]
en-US = "Out of memory. Shut down other applications before retrying."

[OOO_ERROR_92]
en-US = "There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to go back to the previously selected volume."

[OOO_ERROR_93]
en-US = "There is no disk in drive [2]. Please insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume."

[OOO_ERROR_94]
en-US = "The folder [2] does not exist.  Please enter a path to an existing folder."

[OOO_ERROR_95]
en-US = "You have insufficient privileges to read this folder."

[OOO_ERROR_96]
en-US = "A valid destination folder for the installation could not be determined."

[OOO_ERROR_97]
en-US = "Error attempting to read from the source installation database: [2]."

[OOO_ERROR_98]
en-US = "Scheduling reboot operation: Renaming file [2] to [3]. Must reboot to complete operation."

[OOO_ERROR_99]
en-US = "Scheduling reboot operation: Deleting file [2]. Must reboot to complete operation."

[OOO_ERROR_100]
en-US = "Module [2] failed to register.  HRESULT [3].  Contact your support personnel."

[OOO_ERROR_101]
en-US = "Module [2] failed to unregister.  HRESULT [3].  Contact your support personnel."

[OOO_ERROR_102]
en-US = "Failed to cache package [2]. Error: [3]. Contact your support personnel."

[OOO_ERROR_103]
en-US = "Could not register font [2].  Verify that you have sufficient permissions to install fonts, and that the system supports this font."

[OOO_ERROR_104]
en-US = "Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts."

[OOO_ERROR_105]
en-US = "Could not create shortcut [2]. Verify that the destination folder exists and that you can access it."

[OOO_ERROR_106]
en-US = "Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it."

[OOO_ERROR_107]
en-US = "Could not register type library for file [2].  Contact your support personnel."

[OOO_ERROR_108]
en-US = "Could not unregister type library for file [2].  Contact your support personnel."

[OOO_ERROR_109]
en-US = "Could not update the INI file [2][3].  Verify that the file exists and that you can access it."

[OOO_ERROR_110]
en-US = "Could not schedule file [2] to replace file [3] on reboot.  Verify that you have write permissions to file [3]."

[OOO_ERROR_111]
en-US = "Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel."

[OOO_ERROR_112]
en-US = "Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel."

[OOO_ERROR_113]
en-US = "Error removing ODBC driver [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers."

[OOO_ERROR_114]
en-US = "Error installing ODBC driver [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it."

[OOO_ERROR_115]
en-US = "Error configuring ODBC data source [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it."

[OOO_ERROR_116]
en-US = "Service [2] ([3]) failed to start.  Verify that you have sufficient privileges to start system services."

[OOO_ERROR_117]
en-US = "Service [2] ([3]) could not be stopped.  Verify that you have sufficient privileges to stop system services."

[OOO_ERROR_118]
en-US = "Service [2] ([3]) could not be deleted.  Verify that you have sufficient privileges to remove system services."

[OOO_ERROR_119]
en-US = "Service [2] ([3]) could not be installed.  Verify that you have sufficient privileges to install system services."

[OOO_ERROR_120]
en-US = "Could not update environment variable [2].  Verify that you have sufficient privileges to modify environment variables."

[OOO_ERROR_121]
en-US = "You do not have sufficient privileges to complete this installation for all users of the machine.  Log on as an administrator and then retry this installation."

[OOO_ERROR_122]
en-US = "Could not set file security for file [3]. Error: [2].  Verify that you have sufficient privileges to modify the security permissions for this file."

[OOO_ERROR_123]
en-US = "Component Services (COM+ 1.0) are not installed on this computer.  This installation requires Component Services in order to complete successfully.  Component Services are available on Windows 2000."

[OOO_ERROR_124]
en-US = "Error registering COM+ application.  Contact your support personnel for more information."

[OOO_ERROR_125]
en-US = "Error unregistering COM+ application.  Contact your support personnel for more information."

[OOO_ERROR_126]
en-US = "The description for service '[2]' ([3]) could not be changed."

[OOO_ERROR_127]
en-US = "The Windows Installer service cannot update the system file [2] because the file is protected by Windows.  You may need to update your operating system for this program to work correctly. {{Package version: [3], OS Protected version: [4]}}"

[OOO_ERROR_128]
en-US = "The Windows Installer service cannot update the protected Windows file [2]. {{Package version: [3], OS Protected version: [4], SFP Error: [5]}}"

[OOO_ERROR_129]
en-US = "This setup requires Internet Information Server 4.0 or higher for configuring IIS Virtual Roots. Please make sure that you have IIS 4.0 or higher."

[OOO_ERROR_130]
en-US = "This setup requires Administrator privileges for configuring IIS Virtual Roots."

[OOO_ERROR_131]
en-US = "Installing a pre-requisite [2] failed. You might need to manually install it from Microsoft site to be able to run the product.[3]"