components/epaper/EPD_2in13bc.h

   1 /*****************************************************************************
   2 * | File        :   EPD_2in13bc.h
   3 * | Author      :   Waveshare team
   4 * | Function    :   2.13inch e-paper b&c
   5 * | Info        :
   6 *----------------
   7 * |     This version:   V3.0
   8 * | Date        :   2019-06-13
   9 * | Info        :
  10 * -----------------------------------------------------------------------------
  11 * V3.0(2019-06-13):
  12 * 1.Change:
  13 *    EPD_Reset() => EPD_2IN13BC_Reset()
  14 *    EPD_SendCommand() => EPD_2IN13BC_SendCommand()
  15 *    EPD_SendData() => EPD_2IN13BC_SendData()
  16 *    EPD_WaitUntilIdle() => EPD_2IN13BC_ReadBusy()
  17 *    EPD_Init() => EPD_2IN13BC_Init()
  18 *    EPD_Clear() => EPD_2IN13BC_Clear()
  19 *    EPD_Display() => EPD_2IN13BC_Display()
  20 *    EPD_Sleep() => EPD_2IN13BC_Sleep()
  21 * 2.remove commands define:
  22 *    #define PANEL_SETTING                               0x00
  23 *    #define POWER_SETTING                               0x01
  24 *    #define POWER_OFF                                   0x02
  25 *    #define POWER_OFF_SEQUENCE_SETTING                  0x03
  26 *    #define POWER_ON                                    0x04
  27 *    #define POWER_ON_MEASURE                            0x05
  28 *    #define BOOSTER_SOFT_START                          0x06
  29 *    #define DEEP_SLEEP                                  0x07
  30 *    #define DATA_START_TRANSMISSION_1                   0x10
  31 *    #define DATA_STOP                                   0x11
  32 *    #define DISPLAY_REFRESH                             0x12
  33 *    #define DATA_START_TRANSMISSION_2                   0x13
  34 *    #define VCOM_LUT                                    0x20
  35 *    #define W2W_LUT                                     0x21
  36 *    #define B2W_LUT                                     0x22
  37 *    #define W2B_LUT                                     0x23
  38 *    #define B2B_LUT                                     0x24
  39 *    #define PLL_CONTROL                                 0x30
  40 *    #define TEMPERATURE_SENSOR_CALIBRATION              0x40
  41 *    #define TEMPERATURE_SENSOR_SELECTION                0x41
  42 *    #define TEMPERATURE_SENSOR_WRITE                    0x42
  43 *    #define TEMPERATURE_SENSOR_READ                     0x43
  44 *    #define VCOM_AND_DATA_INTERVAL_SETTING              0x50
  45 *    #define LOW_POWER_DETECTION                         0x51
  46 *    #define TCON_SETTING                                0x60
  47 *    #define RESOLUTION_SETTING                          0x61
  48 *    #define GET_STATUS                                  0x71
  49 *    #define AUTO_MEASURE_VCOM                           0x80
  50 *    #define READ_VCOM_VALUE                             0x81
  51 *    #define VCM_DC_SETTING                              0x82
  52 *    #define PARTIAL_WINDOW                              0x90
  53 *    #define PARTIAL_IN                                  0x91
  54 *    #define PARTIAL_OUT                                 0x92
  55 *    #define PROGRAM_MODE                                0xA0
  56 *    #define ACTIVE_PROGRAM                              0xA1
  57 *    #define READ_OTP_DATA                               0xA2
  58 *    #define POWER_SAVING                                0xE3
  59 * V2.0(2018-11-13):
  60 * 1.Remove:ImageBuff[EPD_HEIGHT * EPD_WIDTH / 8]
  61 * 2.Change:EPD_Display(UBYTE *Image)
  62 *   Need to pass parameters: pointer to cached data
  63 #
  64 # Permission is hereby granted, free of charge, to any person obtaining a copy
  65 # of this software and associated documnetation files (the "Software"), to deal
  66 # in the Software without restriction, including without limitation the rights
  67 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  68 # copies of the Software, and to permit persons to  whom the Software is
  69 # furished to do so, subject to the following conditions:
  70 #
  71 # The above copyright notice and this permission notice shall be included in
  72 # all copies or substantial portions of the Software.
  73 #
  74 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  75 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  76 # FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  77 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  78 # LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  79 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  80 # THE SOFTWARE.
  81 #
  82 ******************************************************************************/
  83 #ifndef __EPD_2IN13BC_H_
  84 #define __EPD_2IN13BC_H_
  85
  86 #include "DEV_Config.h"
  87
  88 // Display resolution
  89 #define EPD_2IN13BC_WIDTH       104
  90 #define EPD_2IN13BC_HEIGHT      212
  91
  92 void EPD_2IN13BC_Init(UBYTE mode);
  93 void EPD_2IN13BC_Clear(void);
  94 void EPD_2IN13BC_Display(const UBYTE *blackimage, const UBYTE *ryimage);
  95 void EPD_2IN13BC_Sleep(void);
  96
  97 #endif