1 /*****************************************************************************
2 * | File : EPD_5IN83BC.h
3 * | Author : Waveshare team
4 * | Function : 5.83inch e-paper b&c
9 * -----------------------------------------------------------------------------
12 * EPD_Reset() => EPD_5IN83BC_Reset()
13 * EPD_SendCommand() => EPD_5IN83BC_SendCommand()
14 * EPD_SendData() => EPD_5IN83BC_SendData()
15 * EPD_WaitUntilIdle() => EPD_5IN83BC_ReadBusy()
16 * EPD_Init() => EPD_5IN83BC_Init()
17 * EPD_Clear() => EPD_5IN83BC_Clear()
18 * EPD_Display() => EPD_5IN83BC_Display()
19 * EPD_Sleep() => EPD_5IN83BC_Sleep()
21 * #define PANEL_SETTING 0x00
22 * #define POWER_SETTING 0x01
23 * #define POWER_OFF 0x02
24 * #define POWER_OFF_SEQUENCE_SETTING 0x03
25 * #define POWER_ON 0x04
26 * #define POWER_ON_MEASURE 0x05
27 * #define BOOSTER_SOFT_START 0x06
28 * #define DEEP_SLEEP 0x07
29 * #define DATA_START_TRANSMISSION_1 0x10
30 * #define DATA_STOP 0x11
31 * #define DISPLAY_REFRESH 0x12
32 * #define IMAGE_PROCESS 0x13
33 * #define LUT_FOR_VCOM 0x20
34 * #define LUT_BLUE 0x21
35 * #define LUT_WHITE 0x22
36 * #define LUT_GRAY_1 0x23
37 * #define LUT_GRAY_2 0x24
38 * #define LUT_RED_0 0x25
39 * #define LUT_RED_1 0x26
40 * #define LUT_RED_2 0x27
41 * #define LUT_RED_3 0x28
42 * #define LUT_XON 0x29
43 * #define PLL_CONTROL 0x30
44 * #define TEMPERATURE_SENSOR_COMMAND 0x40
45 * #define TEMPERATURE_CALIBRATION 0x41
46 * #define TEMPERATURE_SENSOR_WRITE 0x42
47 * #define TEMPERATURE_SENSOR_READ 0x43
48 * #define VCOM_AND_DATA_INTERVAL_SETTING 0x50
49 * #define LOW_POWER_DETECTION 0x51
50 * #define TCON_SETTING 0x60
51 * #define TCON_RESOLUTION 0x61
52 * #define SPI_FLASH_CONTROL 0x65
53 * #define REVISION 0x70
54 * #define GET_STATUS 0x71
55 * #define AUTO_MEASUREMENT_VCOM 0x80
56 * #define READ_VCOM_VALUE 0x81
57 * #define VCM_DC_SETTING 0x82
59 * EPD_5IN83BC_DisplayHalfScreen()
60 * -----------------------------------------------------------------------------
62 * 1.Remove:ImageBuff[EPD_HEIGHT * EPD_WIDTH / 8]
63 * 2.Change:EPD_Display(UBYTE *Image)
64 * Need to pass parameters: pointer to cached data
66 # Permission is hereby granted, free of charge, to any person obtaining a copy
67 # of this software and associated documnetation files (the "Software"), to deal
68 # in the Software without restriction, including without limitation the rights
69 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
70 # copies of the Software, and to permit persons to whom the Software is
71 # furished to do so, subject to the following conditions:
73 # The above copyright notice and this permission notice shall be included in
74 # all copies or substantial portions of the Software.
76 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
77 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
78 # FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
79 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
80 # LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
81 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
84 ******************************************************************************/
85 #ifndef __EPD_5IN83BC_H_
86 #define __EPD_5IN83BC_H_
88 #include "DEV_Config.h"
91 #define EPD_5IN83BC_WIDTH 600
92 #define EPD_5IN83BC_HEIGHT 448
94 void EPD_5IN83BC_Init(UBYTE mode
);
95 void EPD_5IN83BC_Clear(void);
96 void EPD_5IN83BC_Display(const UBYTE
*blackimage
, const UBYTE
*ryimage
);
97 void EPD_5IN83BC_DisplayHalfScreen(const UBYTE
*blackimage
, const UBYTE
*ryimage
);
98 void EPD_5IN83BC_Sleep(void);