ini/stm32g0.ini

   1 #
   2 # Marlin Firmware
   3 # PlatformIO Configuration File
   4 #
   5
   6 #################################
   7 #
   8 # STM32G0 Architecture
   9 #
  10 # Naming Example: STM32G0B1RET6
  11 #
  12 #   G : Foundation
  13 #   0 : Cortex M0+ core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
  14 #  B1 : Line/Features
  15 #   R : 64 pins  (R:64 or 66, F:20)
  16 #   E : 512KB Flash-memory  (C:256KB, D:384KB, E:512KB, G:1024KB)
  17 #   T : LQFP package
  18 #   6 : -40...85°C   (7: ...105°C)
  19 #
  20 #################################
  21
  22 #
  23 # BigTree SKR mini E3 V3.0 (STM32G0B1RET6 ARM Cortex-M0+)
  24 #
  25 [env:STM32G0B1RE_btt]
  26 extends                     = stm32_variant
  27 platform                    = ststm32@~14.1.0
  28 platform_packages           = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
  29 board                       = marlin_STM32G0B1RE
  30 board_build.offset          = 0x2000
  31 board_upload.offset_address = 0x08002000
  32 build_flags                 = ${stm32_variant.build_flags}
  33                             -DPIN_SERIAL4_RX=PC_11 -DPIN_SERIAL4_TX=PC_10
  34                             -DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
  35                             -DTIMER_SERVO=TIM3 -DTIMER_TONE=TIM4
  36                             -DSTEP_TIMER_IRQ_PRIO=0
  37 upload_protocol             = stlink
  38 debug_tool                  = stlink
  39
  40 #
  41 # Custom upload to SD via Marlin with Binary Protocol
  42 #
  43 [env:STM32G0B1RE_btt_xfer]
  44 extends         = env:STM32G0B1RE_btt
  45 build_flags     = ${env:STM32G0B1RE_btt.build_flags} -DXFER_BUILD
  46 extra_scripts   = ${env:STM32G0B1RE_btt.extra_scripts}
  47                   pre:buildroot/share/scripts/upload.py
  48 upload_protocol = custom