testHarness/OSIG/Turbomachinery/runDir/Allrun_CMakeOnly

   1 #!/bin/bash
   2 # /*---------------------------------------------------------------------------*\
   3 #   =========                 |
   4 #   \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   5 #    \\    /   O peration     |
   6 #     \\  /    A nd           | Copyright held by original author
   7 #      \\/     M anipulation  |
   8 # -------------------------------------------------------------------------------
   9 # License
  10 #     This file is part of OpenFOAM.
  11 #
  12 #     OpenFOAM is free software; you can redistribute it and/or modify it
  13 #     under the terms of the GNU General Public License as published by the
  14 #     Free Software Foundation; either version 2 of the License, or (at your
  15 #     option) any later version.
  16 #
  17 #     OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
  18 #     ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  19 #     FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  20 #     for more details.
  21 #
  22 #     You should have received a copy of the GNU General Public License
  23 #     along with OpenFOAM; if not, write to the Free Software Foundation,
  24 #     Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  25 #
  26 # Description
  27 #        Allrun file for running the OpenFOAM Turbomachinery OSIG test harness
  28 #        This script will only initialize the test harness using CMake
  29 #
  30 # Author
  31 #        Martin Beaudoin, Hydro-Quebec, 2010. All rights reserved
  32 #
  33 # \*---------------------------------------------------------------------------*/
  34
  35 #set -x
  36
  37 # Environment variable : BREEDER_15_DIR:
  38 #
  39 # This environment variable must point to the location of the Breeder_1.5 section
  40 # of your local working copy of the openfoam-extend Subversion repository
  41 #
  42 # Something like this:
  43 #
  44 # export BREEDER_15_DIR=/someAbsolutePath/Breeder_1.5
  45
  46 export BREEDER_OSIG_TURBOMACHINERY_DIR=${BREEDER_15_DIR}/OSIG/TurboMachinery
  47
  48 # This environment variable must point to the location of the test harness main directory
  49 export FOAM_TEST_HARNESS_DIR=$(dirname $PWD)
  50
  51 # First, some sanity checks
  52 #
  53
  54 # We need $BREEDER_15_DIR
  55 if [ ! -n "${BREEDER_15_DIR}" ]
  56 then
  57     echo "Warning:"
  58     echo "  Missing environment variable \$BREEDER_15_DIR. Stopping."
  59     echo "  Please make sure to initialize this environment variable to "
  60     echo "  the directory where you have installed the Breeder_1.5 section "
  61     echo "  of the openfoam-extend Subversion repository"
  62     exit -1
  63 fi
  64
  65 # We need $WM_PROJECT_DIR
  66 if [ -z "$WM_PROJECT_DIR" ]
  67 then
  68     echo "Warning:"
  69     echo "  Missing environment variable \$WM_PROJECT_DIR. Stopping."
  70     echo "  Please make sure your OpenFOAM environment is properly set up."
  71     exit -1
  72 fi
  73
  74 # We need $
  75 if [ ! -e $BREEDER_OSIG_TURBOMACHINERY_DIR/CMakeLists.txt ]
  76 then
  77     echo "Warning:"
  78     echo "  Missing file: CMakeLists.txt under \$BREEDER_15_DIR/OSIG/TurboMachinery. Stopping."
  79     echo "  A copy of CMakeLists.txt is available under $FOAM_TEST_HARNESS_DIR/CMakeFiles."
  80     echo "  Please make a copy of this file under the directory \$BREEDER_15_DIR/OSIG/TurboMachinery."
  81     exit -1
  82 fi
  83
  84 # We also need $BREEDER_OSIG_TURBOMACHINERY_DIR/CTestConfig.cmake
  85 if [ ! -e $BREEDER_OSIG_TURBOMACHINERY_DIR/CTestConfig.cmake ]
  86 then
  87     echo "Warning:"
  88     echo "  Missing file: CTestConfig.cmake under \$BREEDER_OSIG_TURBOMACHINERY_DIR. Stopping."
  89     echo "  A copy of CTestConfig.cmake for openfoam-extend is available under $FOAM_TEST_HARNESS_DIR/CMakeFiles."
  90     echo "  For a copy of CTestConfig.cmake for your local CDash server, contact your local CDash admin."
  91     echo "  Please make a copy of this file under \$BREEDER_OSIG_TURBOMACHINERY_DIR/CTestConfig.cmake."
  92     exit -1
  93 fi
  94
  95 # Make sure the CMake and tutorials runtime files are updated
  96 # We need cmake version 2.8.0 at least
  97 cmake $BREEDER_OSIG_TURBOMACHINERY_DIR
  98
  99 # All set. Now we can run the available test harness
 100 #
 101 # Invoke make help for the complete list of available commands.
 102 #
 103 # User-demand testing.
 104 # Will do: ExperimentalConfigure + ExperimentalBuild + ExperimentalTest + ExperimentalSubmit
 105 # make Experimental
 106
 107 # Nightly testing
 108 # Will do: NightlyUpdate + NightylConfigure + NightlyBuild + NightlyTest + NightlySubmit
 109 # make Nightly
 110
 111 # That's it