| blob | da789161c9829869e03fc05cb415ca598e3d0107 |
1 /*
2 Unix SMB/CIFS implementation.
3 SMB client
4 Copyright (C) Andrew Tridgell 1994-1998
5 Copyright (C) Simo Sorce 2001-2002
6 Copyright (C) Jelmer Vernooij 2003
7 Copyright (C) Gerald (Jerry) Carter 2004
8 Copyright (C) Jeremy Allison 1994-2007
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 3 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program. If not, see <http://www.gnu.org/licenses/>.
22 */
27 #ifndef REGISTER
28 #define REGISTER 0
29 #endif
53 #define CREATE_ACCESS_READ READ_CONTROL_ACCESS
55 /* 30 second timeout on most commands */
56 #define CLIENT_TIMEOUT (30*1000)
57 #define SHORT_TIMEOUT (5*1000)
59 /* value for unused fid field in trans2 secondary request */
60 #define FID_UNUSED (0xFFFF)
68 /* clitar bits insert */
72 /* clitar bits end */
86 /* timing globals */
92 /* totals globals */
95 /* encrypted state. */
98 /* root cli_state connection */
105 /* Accessor functions for directory paths. */
108 {
111 }
113 }
116 {
120 }
122 }
126 {
129 }
131 }
134 {
138 }
140 }
144 {
147 }
149 }
152 {
156 }
158 }
160 /****************************************************************************
161 Write to a local file with CR/LF->LF translation if appropriate. Return the
162 number taken from the buffer. This may not equal the number written.
163 ****************************************************************************/
166 {
171 }
177 }
180 }
181 b++;
182 i++;
183 }
186 }
188 /****************************************************************************
189 Read from a file with LF->CR/LF translation if appropriate. Return the
190 number read. read approx n bytes.
191 ****************************************************************************/
194 {
205 }
209 }
212 }
215 }
217 /****************************************************************************
218 Send a message.
219 ****************************************************************************/
222 {
230 }
247 }
251 }
256 }
259 }
263 else
269 }
270 }
272 /****************************************************************************
273 Check the space on a device.
274 ****************************************************************************/
277 {
286 }
291 }
297 }
299 /****************************************************************************
300 Show cd/pwd.
301 ****************************************************************************/
304 {
308 }
310 /****************************************************************************
311 Ensure name has correct directory separators.
312 ****************************************************************************/
315 {
318 }
319 }
321 /****************************************************************************
322 Change directory - inner section.
323 ****************************************************************************/
326 {
332 SMB_STRUCT_STAT sbuf;
333 uint32 attributes;
341 }
345 /* Save the current directory in case the new directory is invalid */
351 }
359 newdir);
362 }
363 }
365 /* Ensure cur_dir ends in a DIRSEP */
370 }
371 }
381 }
386 }
388 /* Use a trans2_qpathinfo to test directories for modern servers.
389 Except Win9x doesn't support the qpathinfo_basic() call..... */
396 }
402 }
406 targetpath,
407 CLI_DIRSEP_STR );
411 }
416 }
422 }
423 }
427 out:
431 }
433 /****************************************************************************
434 Change directory.
435 ****************************************************************************/
438 {
446 }
449 }
451 /****************************************************************************
452 Change directory.
453 ****************************************************************************/
456 {
458 }
460 /*******************************************************************
461 Decide if a file should be operated on.
462 ********************************************************************/
465 {
468 }
472 }
478 }
483 }
488 }
491 }
493 /****************************************************************************
494 Display info about a file.
495 ****************************************************************************/
498 {
504 }
518 /* skip if this is . or .. */
521 /* create absolute filename for cli_nt_create() FIXME */
524 dir,
525 CLI_DIRSEP_STR,
529 }
530 /* print file meta date header */
538 afname,
549 }
551 }
553 }
554 }
556 /****************************************************************************
557 Accumulate size of a file.
558 ****************************************************************************/
561 {
564 }
565 }
575 /****************************************************************************
576 Functions for do_list_queue.
577 ****************************************************************************/
579 /*
580 * The do_list_queue is a NUL-separated list of strings stored in a
581 * char*. Since this is a FIFO, we keep track of the beginning and
582 * ending locations of the data in the queue. When we overflow, we
583 * double the size of the char*. When the start of the data passes
584 * the midpoint, we move everything back. This is logically more
585 * complex than a linked list, but easier from a memory management
586 * angle. In any memory error condition, do_list_queue is reset.
587 * Functions check to ensure that do_list_queue is non-NULL before
588 * accessing it.
589 */
592 {
597 }
600 {
610 }
611 }
614 {
615 /*
616 * If the starting point of the queue is more than half way through,
617 * move everything toward the beginning.
618 */
624 }
637 }
638 }
641 {
655 }
656 }
663 }
664 }
667 {
669 }
672 {
678 }
679 }
682 {
684 }
686 /****************************************************************************
687 A helper for do_list.
688 ****************************************************************************/
691 {
696 /* Work out the directory. */
700 }
703 }
708 }
720 }
724 mntpoint,
725 mask);
729 }
734 }
739 CLI_DIRSEP_STR);
743 }
746 }
749 }
753 }
755 }
757 /****************************************************************************
758 A wrapper around cli_list that adds recursion.
759 ****************************************************************************/
762 uint16 attribute,
766 {
773 fprintf(stderr, "INTERNAL ERROR: do_list called recursively when the recursive flag is true\n");
775 }
788 /*
789 * Need to copy head so that it doesn't become
790 * invalid inside the call to cli_list. This
791 * would happen if the list were expanded
792 * during the call.
793 * Fix from E. Jay Berkenbilt (ejb@ql.org)
794 */
799 }
801 /* check for dfs */
807 }
821 /* cwd is only used if showacls is on */
823 }
824 }
829 }
830 }
833 }
835 /* check for dfs */
840 }
844 }
845 }
849 }
851 /****************************************************************************
852 Get a directory listing.
853 ****************************************************************************/
856 {
867 }
875 }
878 }
881 }
884 /* cwd is only used if showacls is on */
886 }
895 }
897 /****************************************************************************
898 Get a directory listing.
899 ****************************************************************************/
902 {
913 }
918 }
919 }
927 }
930 }
939 }
942 {
946 NTSTATUS status;
952 }
959 }
962 }
964 /****************************************************************************
965 Get a file from rname to lname
966 ****************************************************************************/
969 {
973 }
975 }
978 {
983 uint16 attr;
984 SMB_OFF_T size;
991 NTSTATUS status;
996 }
1000 }
1005 }
1014 }
1026 }
1027 }
1030 }
1032 }
1036 }
1045 }
1057 }
1062 }
1066 }
1070 }
1072 {
1077 this_time =
1086 }
1090 }
1092 /****************************************************************************
1093 Get a file.
1094 ****************************************************************************/
1097 {
1106 }
1111 }
1115 }
1119 }
1124 }
1127 }
1129 /****************************************************************************
1130 Do an mget operation on one file.
1131 ****************************************************************************/
1134 {
1144 }
1152 }
1158 }
1163 }
1164 }
1169 }
1179 }
1183 }
1185 /* handle directories */
1189 }
1195 CLI_DIRSEP_STR);
1198 }
1204 }
1211 }
1217 }
1225 }
1233 }
1235 /****************************************************************************
1236 View the file using the pager.
1237 ****************************************************************************/
1240 {
1253 }
1258 }
1263 }
1270 }
1274 }
1278 }
1287 lname);
1290 }
1295 }
1297 /****************************************************************************
1298 Do a mget command.
1299 ****************************************************************************/
1302 {
1310 }
1318 }
1323 buf);
1324 }
1327 }
1329 }
1337 }
1339 }
1342 }
1344 /****************************************************************************
1345 Make a directory of name "name".
1346 ****************************************************************************/
1349 {
1357 }
1363 }
1366 }
1368 /****************************************************************************
1369 Show 8.3 name of a file.
1370 ****************************************************************************/
1373 {
1374 fstring altname;
1380 }
1384 }
1386 /****************************************************************************
1387 Exit client.
1388 ****************************************************************************/
1391 {
1394 /* NOTREACHED */
1396 }
1398 /****************************************************************************
1399 Make a directory.
1400 ****************************************************************************/
1403 {
1411 }
1416 }
1418 }
1422 }
1435 }
1439 }
1444 }
1451 }
1454 }
1458 }
1460 }
1463 }
1466 }
1468 /****************************************************************************
1469 Show alt name.
1470 ****************************************************************************/
1473 {
1481 }
1486 }
1490 }
1493 }
1495 /****************************************************************************
1496 Show all info we can get
1497 ****************************************************************************/
1500 {
1501 fstring altname;
1503 SMB_OFF_T size;
1505 SMB_INO_T ino;
1506 NTTIME tmp;
1515 }
1523 }
1542 }
1547 }
1550 }
1552 /****************************************************************************
1553 Show all info we can get
1554 ****************************************************************************/
1557 {
1565 }
1570 }
1574 }
1579 }
1581 /****************************************************************************
1582 Put a single file.
1583 ****************************************************************************/
1586 {
1602 }
1613 }
1614 }
1617 }
1622 }
1624 /* allow files to be piped into smbclient
1625 jdblair 24.jun.98
1627 Note that in this case this function will exit(0) rather
1628 than returning. */
1631 /* size of file is not known */
1638 }
1639 }
1640 }
1645 }
1648 rname));
1654 }
1669 }
1677 }
1680 }
1687 }
1691 }
1695 {
1700 this_time =
1709 }
1714 }
1717 }
1719 /****************************************************************************
1720 Put a file.
1721 ****************************************************************************/
1724 {
1733 }
1738 }
1744 }
1747 }
1752 }
1754 {
1755 SMB_STRUCT_STAT st;
1756 /* allow '-' to represent stdin
1757 jdblair, 24.jun.98 */
1762 }
1763 }
1766 }
1768 /*************************************
1769 File list structure.
1770 *************************************/
1778 /****************************************************************************
1779 Free a file_list structure.
1780 ****************************************************************************/
1783 {
1791 }
1792 }
1794 /****************************************************************************
1795 Seek in a directory/file list until you get something that doesn't start with
1796 the specified name.
1797 ****************************************************************************/
1800 {
1805 }
1807 }
1810 }
1812 /****************************************************************************
1813 Set the file selection mask.
1814 ****************************************************************************/
1817 {
1821 ;
1826 }
1828 }
1830 /****************************************************************************
1831 Recursive file matching function act as find
1832 match must be always set to true when calling this function
1833 ****************************************************************************/
1837 {
1858 }
1868 }
1871 }
1877 }
1878 }
1884 }
1890 }
1891 }
1895 }
1897 /****************************************************************************
1898 mput some files.
1899 ****************************************************************************/
1902 {
1917 }
1929 }
1932 /* check if it's a directory */
1934 /* if (!recurse) continue; */
1939 }
1941 /* Skip the directory */
1949 }
1954 /* Skip the directory */
1958 }
1959 }
1960 }
1966 }
1968 /* No */
1970 }
1972 /* Yes */
1976 }
1977 }
1982 }
1987 }
1990 }
1992 /****************************************************************************
1993 Cancel a print job.
1994 ****************************************************************************/
1997 {
2004 }
2005 }
2007 /****************************************************************************
2008 Cancel a print job.
2009 ****************************************************************************/
2012 {
2020 }
2027 }
2029 /****************************************************************************
2030 Print a file.
2031 ****************************************************************************/
2034 {
2043 }
2048 }
2055 }
2060 }
2063 }
2066 }
2068 /****************************************************************************
2069 Show a print queue entry.
2070 ****************************************************************************/
2073 {
2075 }
2077 /****************************************************************************
2078 Show a print queue.
2079 ****************************************************************************/
2082 {
2085 }
2087 /****************************************************************************
2088 Delete some files.
2089 ****************************************************************************/
2092 {
2098 dir,
2099 CLI_DIRSEP_CHAR,
2103 }
2108 }
2113 }
2115 }
2117 /****************************************************************************
2118 Delete some files.
2119 ****************************************************************************/
2122 {
2130 }
2135 }
2139 }
2143 }
2147 }
2149 /****************************************************************************
2150 Wildcard delete some files.
2151 ****************************************************************************/
2154 {
2158 uint16 attribute;
2165 }
2172 }
2176 buf);
2179 }
2184 }
2188 }
2190 }
2192 /****************************************************************************
2193 ****************************************************************************/
2196 {
2207 }
2211 buf);
2214 }
2219 }
2228 }
2231 }
2233 }
2236 {
2250 }
2255 }
2260 }
2263 user,
2264 password,
2265 domain);
2266 }
2273 }
2276 }
2278 /****************************************************************************
2279 ****************************************************************************/
2282 {
2288 mode_t mode;
2294 }
2298 buf);
2301 }
2306 }
2312 }
2321 }
2324 }
2327 }
2330 {
2336 mode_t mode;
2342 }
2346 buf);
2349 }
2354 }
2360 }
2367 }
2369 }
2372 {
2382 }
2386 buf);
2389 }
2394 }
2400 }
2403 }
2406 {
2416 }
2420 buf);
2423 }
2428 }
2434 }
2437 }
2440 {
2448 }
2451 /* We really should use the targetcli here.... */
2455 }
2457 }
2460 {
2469 }
2474 }
2481 }
2486 }
2487 }
2492 }
2493 }
2498 }
2499 }
2504 }
2505 }
2510 }
2511 }
2516 }
2517 }
2522 }
2523 }
2528 }
2529 }
2534 }
2535 }
2539 }
2546 }
2552 }
2555 }
2558 {
2568 }
2574 }
2583 }
2588 }
2595 }
2601 }
2604 }
2607 {
2616 }
2622 }
2629 }
2635 }
2638 }
2641 /****************************************************************************
2642 Remove a directory.
2643 ****************************************************************************/
2646 {
2656 }
2660 buf);
2663 }
2668 }
2673 }
2676 }
2678 /****************************************************************************
2679 UNIX hardlink.
2680 ****************************************************************************/
2683 {
2696 }
2700 buf);
2703 }
2707 buf2);
2710 }
2715 }
2720 }
2725 }
2727 }
2729 /****************************************************************************
2730 UNIX symlink.
2731 ****************************************************************************/
2734 {
2747 }
2751 buf);
2754 }
2758 buf2);
2761 }
2766 }
2771 }
2777 }
2780 }
2782 /****************************************************************************
2783 UNIX chmod.
2784 ****************************************************************************/
2787 {
2794 mode_t mode;
2800 }
2804 buf2);
2807 }
2814 }
2819 }
2825 }
2828 }
2831 {
2837 #ifdef S_ISCHR
2841 #endif
2842 #ifdef S_ISBLK
2846 #endif
2847 #ifdef S_ISFIFO
2851 #endif
2852 #ifdef S_ISLNK
2856 #endif
2857 #ifdef S_ISSOCK
2861 #endif
2863 }
2866 {
2871 }
2872 }
2875 {
2899 }
2911 }
2913 /****************************************************************************
2914 Utility function for UNIX getfacl.
2915 ****************************************************************************/
2918 {
2922 }
2925 }
2928 }
2930 }
2932 /****************************************************************************
2933 UNIX getfacl.
2934 ****************************************************************************/
2937 {
2947 SMB_STRUCT_STAT sbuf;
2950 uint16 i;
2955 }
2959 name);
2962 }
2967 }
2972 }
2978 }
2984 }
2990 }
2996 }
2998 /* ToDo : Print out the ACL values. */
3004 }
3008 if (rb_size != SMB_POSIX_ACL_HEADER_SIZE + SMB_POSIX_ACL_ENTRY_SIZE*(num_file_acls+num_dir_acls)) {
3010 src,
3011 (unsigned int)(SMB_POSIX_ACL_HEADER_SIZE + SMB_POSIX_ACL_ENTRY_SIZE*(num_file_acls+num_dir_acls)),
3016 }
3023 }
3026 uint32 uorg;
3027 fstring permstring;
3057 }
3060 }
3063 uint32 uorg;
3064 fstring permstring;
3065 unsigned char tagtype = CVAL(retbuf, SMB_POSIX_ACL_HEADER_SIZE+((i+num_file_acls)*SMB_POSIX_ACL_ENTRY_SIZE));
3066 unsigned char perms = CVAL(retbuf, SMB_POSIX_ACL_HEADER_SIZE+((i+num_file_acls)*SMB_POSIX_ACL_ENTRY_SIZE)+1);
3094 }
3097 }
3101 }
3103 /****************************************************************************
3104 UNIX stat.
3105 ****************************************************************************/
3108 {
3114 fstring mode_str;
3115 SMB_STRUCT_STAT sbuf;
3121 }
3125 name);
3128 }
3133 }
3138 }
3144 }
3146 /* Print out the stat values. */
3153 #if defined(S_ISCHR) && defined(S_ISBLK)
3161 #endif
3177 }
3185 }
3193 }
3197 }
3200 /****************************************************************************
3201 UNIX chown.
3202 ****************************************************************************/
3205 {
3208 uid_t uid;
3209 gid_t gid;
3219 }
3227 buf3);
3230 }
3234 }
3239 }
3245 }
3248 }
3250 /****************************************************************************
3251 Rename some file.
3252 ****************************************************************************/
3255 {
3267 }
3272 buf);
3275 }
3280 buf2);
3283 }
3288 }
3293 }
3298 targetsrc,
3299 targetdest);
3301 }
3304 }
3306 /****************************************************************************
3307 Print the volume name.
3308 ****************************************************************************/
3311 {
3312 fstring volname;
3313 uint32 serial_num;
3319 }
3324 }
3326 /****************************************************************************
3327 Hard link files using the NT call.
3328 ****************************************************************************/
3331 {
3342 }
3347 buf);
3350 }
3355 buf2);
3358 }
3363 }
3368 }
3371 }
3373 /****************************************************************************
3374 Toggle the prompt flag.
3375 ****************************************************************************/
3378 {
3382 }
3384 /****************************************************************************
3385 Set the newer than time.
3386 ****************************************************************************/
3389 {
3393 SMB_STRUCT_STAT sbuf;
3402 }
3407 }
3410 }
3412 /****************************************************************************
3413 Set the archive level.
3414 ****************************************************************************/
3417 {
3425 }
3428 }
3430 /****************************************************************************
3431 Toggle the lowercaseflag.
3432 ****************************************************************************/
3435 {
3439 }
3441 /****************************************************************************
3442 Toggle the case sensitive flag.
3443 ****************************************************************************/
3446 {
3453 }
3455 /****************************************************************************
3456 Toggle the showacls flag.
3457 ****************************************************************************/
3460 {
3464 }
3467 /****************************************************************************
3468 Toggle the recurse flag.
3469 ****************************************************************************/
3472 {
3476 }
3478 /****************************************************************************
3479 Toggle the translate flag.
3480 ****************************************************************************/
3483 {
3488 }
3490 /****************************************************************************
3491 Do the lcd command.
3492 ****************************************************************************/
3495 {
3502 }
3506 }
3509 }
3511 /****************************************************************************
3512 Get a file restarting at end of local file.
3513 ****************************************************************************/
3516 {
3526 }
3531 }
3535 }
3539 }
3545 }
3548 }
3550 /****************************************************************************
3551 Put a file restarting at end of local file.
3552 ****************************************************************************/
3555 {
3560 SMB_STRUCT_STAT st;
3565 }
3570 }
3575 }
3579 buf);
3582 local_name);
3583 }
3586 }
3591 }
3594 }
3596 /****************************************************************************
3597 List a share name.
3598 ****************************************************************************/
3602 {
3618 }
3619 /* FIXME: If the remote machine returns non-ascii characters
3620 in any of these fields, they can corrupt the output. We
3621 should remove them. */
3627 }
3628 }
3631 {
3632 NTSTATUS status;
3635 WERROR werr;
3650 }
3670 }
3675 }
3680 }
3682 /****************************************************************************
3683 Try and browse available connections on a host.
3684 ****************************************************************************/
3687 {
3692 }
3696 }
3702 }
3704 /****************************************************************************
3705 List a server name.
3706 ****************************************************************************/
3710 {
3716 }
3717 }
3719 /****************************************************************************
3720 Try and browse available connections on a host.
3721 ****************************************************************************/
3724 {
3725 fstring state;
3733 };
3736 state);
3741 };
3747 }
3749 /****************************************************************************
3750 Print or set current VUID
3751 ****************************************************************************/
3754 {
3761 }
3765 }
3767 /****************************************************************************
3768 Setup a new VUID, by issuing a session setup
3769 ****************************************************************************/
3772 {
3779 }
3785 }
3786 }
3789 }
3797 }
3801 }
3804 /****************************************************************************
3805 list active connections
3806 ****************************************************************************/
3809 {
3812 }
3814 /****************************************************************************
3815 display the current active client connection
3816 ****************************************************************************/
3819 {
3828 }
3832 }
3834 /****************************************************************************
3835 iosize command
3836 ***************************************************************************/
3839 {
3847 "Minimum is 16384 (0x4000), "
3851 "(Encrypted connection) ,"
3852 "Minimum is 16384 (0x4000), "
3854 }
3856 }
3861 "connection (min = 16384 (0x4000), "
3868 }
3873 }
3876 /* Some constants for completing filename arguments */
3882 /* This defines the commands supported by this client.
3883 * NOTE: The "!" must be the last one in the list because it's fn pointer
3884 * field is NULL, and NULL in that field is used in process_tok()
3885 * (below) to indicate the end of the list. crh
3886 */
3897 {"archive",cmd_archive,"<level>\n0=ignore archive bit\n1=only get archive files\n2=only get archive files and reset archive bit\n3=get all files and reset archive bit",{COMPL_NONE,COMPL_NONE}},
3900 {"case_sensitive",cmd_setcase,"toggle the case sensitive flag to server",{COMPL_NONE,COMPL_NONE}},
3902 {"chmod",cmd_chmod,"<src> <mode> chmod a file using UNIX permission",{COMPL_REMOTE,COMPL_REMOTE}},
3903 {"chown",cmd_chown,"<src> <uid> <gid> chown a file using UNIX uids and gids",{COMPL_REMOTE,COMPL_REMOTE}},
3907 {"du",cmd_du,"<mask> computes the total size of the current directory",{COMPL_REMOTE,COMPL_NONE}},
3911 {"getfacl",cmd_getfacl,"<file name> get the POSIX ACL on a file (UNIX extensions only)",{COMPL_REMOTE,COMPL_LOCAL}},
3912 {"hardlink",cmd_hardlink,"<src> <dest> create a Windows hard link",{COMPL_REMOTE,COMPL_REMOTE}},
3916 {"lcd",cmd_lcd,"[directory] change/report the local current working directory",{COMPL_LOCAL,COMPL_NONE}},
3918 {"lock",cmd_lock,"lock <fnum> [r|w] <hex-start> <hex-len> : set a POSIX lock",{COMPL_REMOTE,COMPL_REMOTE}},
3926 {"more",cmd_more,"<remote name> view a remote file with your pager",{COMPL_REMOTE,COMPL_NONE}},
3928 {"newer",cmd_newer,"<file> only mget files newer than the specified local file",{COMPL_LOCAL,COMPL_NONE}},
3931 {"posix_encrypt",cmd_posix_encrypt,"<domain> <user> <password> start up transport encryption",{COMPL_REMOTE,COMPL_NONE}},
3932 {"posix_open",cmd_posix_open,"<name> 0<mode> open_flags mode open a file using POSIX interface",{COMPL_REMOTE,COMPL_NONE}},
3933 {"posix_mkdir",cmd_posix_mkdir,"<name> 0<mode> creates a directory using POSIX interface",{COMPL_REMOTE,COMPL_NONE}},
3934 {"posix_rmdir",cmd_posix_rmdir,"<name> removes a directory using POSIX interface",{COMPL_REMOTE,COMPL_NONE}},
3935 {"posix_unlink",cmd_posix_unlink,"<name> removes a file using POSIX interface",{COMPL_REMOTE,COMPL_NONE}},
3937 {"prompt",cmd_prompt,"toggle prompting for filenames for mget and mput",{COMPL_NONE,COMPL_NONE}},
3939 {"pwd",cmd_pwd,"show current remote directory (same as 'cd' with no args)",{COMPL_NONE,COMPL_NONE}},
3944 {"recurse",cmd_recurse,"toggle directory recursion for mget and mput",{COMPL_NONE,COMPL_NONE}},
3945 {"reget",cmd_reget,"<remote name> [local name] get a file restarting at end of local file",{COMPL_REMOTE,COMPL_LOCAL}},
3947 {"reput",cmd_reput,"<local name> [remote name] put a file restarting at end of remote file",{COMPL_LOCAL,COMPL_REMOTE}},
3951 {"setmode",cmd_setmode,"filename <setmode string> change modes of file",{COMPL_REMOTE,COMPL_NONE}},
3952 {"stat",cmd_stat,"filename Do a UNIX extensions stat call on a file",{COMPL_REMOTE,COMPL_REMOTE}},
3953 {"symlink",cmd_symlink,"<oldname> <newname> create a UNIX symlink",{COMPL_REMOTE,COMPL_REMOTE}},
3954 {"tar",cmd_tar,"tar <c|x>[IXFqbgNan] current directory to/from <file name>",{COMPL_NONE,COMPL_NONE}},
3955 {"tarmode",cmd_tarmode,"<full|inc|reset|noreset> tar's behaviour towards archive bits",{COMPL_NONE,COMPL_NONE}},
3957 {"unlock",cmd_unlock,"unlock <fnum> <hex-start> <hex-len> : remove a POSIX lock",{COMPL_REMOTE,COMPL_REMOTE}},
3960 {"wdel",cmd_wdel,"<attrib> <mask> wildcard delete all matching files",{COMPL_REMOTE,COMPL_NONE}},
3963 {"showconnect",cmd_show_connect,"display the current active connection",{COMPL_NONE,COMPL_NONE}},
3966 /* Yes, this must be here, see crh's comment above. */
3969 };
3971 /*******************************************************************
3972 Lookup a command string in the list of commands, including
3973 abbreviations.
3974 ******************************************************************/
3977 {
3988 matches++;
3990 }
3991 i++;
3992 }
3998 else
4000 }
4002 /****************************************************************************
4003 Help.
4004 ****************************************************************************/
4007 {
4020 i++;
4021 }
4023 }
4024 }
4026 }
4028 /****************************************************************************
4029 Process a -c command string.
4030 ****************************************************************************/
4033 {
4040 }
4041 /* establish the connection if not already */
4048 }
4049 }
4064 }
4066 /* and get the first part of the command */
4070 }
4078 }
4079 }
4082 }
4084 #define MAX_COMPLETIONS 100
4098 {
4115 }
4120 }
4123 }
4127 }
4130 }
4133 }
4136 }
4144 }
4145 }
4147 }
4148 }
4151 {
4159 /* can't have non-static intialisation on Sun CC, so do it
4160 at run time here */
4169 }
4171 /*
4172 * We're leaving matches[0] free to fill it later with the text to
4173 * display: Either the one single match or the longest common subset
4174 * of the matches.
4175 */
4182 }
4183 }
4192 }
4199 text);
4204 }
4208 }
4211 }
4215 }
4219 }
4222 /*
4223 * No matches at all, NULL indicates there is nothing
4224 */
4229 }
4232 /*
4233 * Exactly one match in matches[1], indicate this is the one
4234 * in matches[0].
4235 */
4241 }
4243 /*
4244 * We got more than one possible match, set the result to the maximum
4245 * common subset
4246 */
4252 cleanup:
4255 }
4260 }
4263 {
4283 }
4284 }
4289 sp++;
4293 else
4307 }
4318 else
4320 samelen--;
4321 count++;
4322 }
4323 }
4338 }
4342 cleanup:
4348 }
4349 }
4353 /****************************************************************************
4354 Make sure we swallow keepalives during idle time.
4355 ****************************************************************************/
4358 {
4359 fd_set fds;
4371 again:
4383 /* We deliberately use receive_smb_raw instead of
4384 client_receive_smb as we want to receive
4385 session keepalives and then drop them here.
4386 */
4388 NTSTATUS status;
4403 SMB_READ_EOF);
4405 }
4409 SMB_READ_TIMEOUT);
4411 }
4415 }
4420 }
4423 }
4425 /* Ping the server to keep the connection alive using SMBecho. */
4426 {
4427 NTSTATUS status;
4437 }
4438 }
4439 }
4441 /****************************************************************************
4442 Process commands on stdin.
4443 ****************************************************************************/
4446 {
4456 /* display a prompt */
4460 }
4466 }
4468 /* special case - first char is ! */
4474 }
4476 /* and get the first part of the command */
4482 }
4490 }
4493 }
4495 }
4497 /****************************************************************************
4498 Process commands from the client.
4499 ****************************************************************************/
4502 {
4509 }
4516 }
4517 }
4523 }
4527 }
4529 /****************************************************************************
4530 Handle a -L query.
4531 ****************************************************************************/
4534 {
4546 query_host);
4548 }
4552 /* Workgroups simply don't make sense over anything
4553 else but port 139... */
4559 }
4564 }
4571 }
4573 /****************************************************************************
4574 Handle a tar operation.
4575 ****************************************************************************/
4578 {
4581 /* do we already have a connection? */
4587 }
4596 }
4597 }
4604 }
4606 /****************************************************************************
4607 Handle a message operation.
4608 ****************************************************************************/
4611 {
4614 fstring server_name;
4617 NTSTATUS status;
4630 /* we can only do messages over port 139 (to windows clients at least) */
4637 }
4643 }
4649 }
4655 }
4657 /****************************************************************************
4658 main program
4659 ****************************************************************************/
4662 {
4669 poptContext pc;
4672 fstring new_workgroup;
4676 POPT_AUTOHELP
4678 { "name-resolve", 'R', POPT_ARG_STRING, &new_name_resolve_order, 'R', "Use these name resolution services only", "NAME-RESOLVE-ORDER" },
4682 { "list", 'L', POPT_ARG_STRING, NULL, 'L', "Get a list of shares available on a host", "HOST" },
4683 { "terminal", 't', POPT_ARG_STRING, NULL, 't', "Terminal I/O code {sjis|euc|jis7|jis8|junet|hex}", "CODE" },
4688 { "send-buffer", 'b', POPT_ARG_INT, &io_bufsize, 'b', "Changes the transmit/send buffer", "BYTES" },
4692 POPT_COMMON_SAMBA
4693 POPT_COMMON_CONNECTION
4694 POPT_COMMON_CREDENTIALS
4695 POPT_TABLEEND
4696 };
4701 }
4703 #ifdef KANJI
4710 }
4712 /* initialize the workgroup name so we can determine whether or
4713 not it was set by a command line option */
4718 /* set default debug level to 1 regardless of what smb.conf sets */
4723 }
4727 /* skip argv(0) */
4735 /* if the tar option has been called previouslt, now we need to eat out the leftovers */
4736 /* I see no other way to keep things sane --SSS */
4740 }
4742 }
4744 /* if the service has not yet been specified lets see if it is available in the popt stack */
4749 }
4751 }
4753 /* if the service has already been retrieved then check if we have also a password */
4756 }
4760 /* Messages are sent to NetBIOS name type 0x3
4761 * (Messenger Service). Make sure we default
4762 * to port 139 instead of port 445. srl,crh
4763 */
4769 }
4775 {
4778 }
4782 }
4787 }
4796 }
4802 }
4808 /* We must use old option processing for this. Find the
4809 * position of the -T option in the raw argv[]. */
4810 {
4815 }
4816 i++;
4820 }
4821 }
4822 /* this must be the last option, mark we have parsed it so that we know we have */
4829 }
4840 }
4841 }
4843 /* We may still have some leftovers after the last popt option has been called */
4847 }
4849 }
4851 /* if the service has not yet been specified lets see if it is available in the popt stack */
4856 }
4858 }
4860 /* if the service has already been retrieved then check if we have also a password */
4863 }
4865 /* check for the -P option */
4870 /*
4871 * Don't load debug level from smb.conf. It should be
4872 * set by cmdline arg or remain default (0)
4873 */
4876 /* save the workgroup...
4878 FIXME!! do we need to do this for other options as well
4879 (or maybe a generic way to keep lp_load() from overwriting
4880 everything)? */
4886 }
4894 }
4899 }
4906 /* Convert any '/' characters in the service name to '\' characters */
4912 }
4913 /* Remove trailing slashes */
4918 }
4919 }
4923 }
4930 }
4936 }
4944 }
4948 /* Store the username and password for dfs support */
4958 }
4965 qhost++;
4970 }
4974 p++;
4977 }
4980 }
4984 }
4988 }
4992 }