updated top-level README and version_decl for V4.5 (#1847)

[WRF.git] / external / io_grib_share / TEST_RESULTS

file TEST_RESULTS
Tom Henderson

A series of tests were run on AIX and OSF1 machines prior to committing 
Todd Hutchinson's grib1 and grib2 packages to the repository.  These are 
described in detail below.  

In addition, Todd ran many tests on his Linux systems, including a pass 
through vgrind for memory checking.  


NOTE ONE KNOWN BUG:  
  RUC LSM fails in lsmrucinit() when grib1 input is used (divide-by-zero 
  error).  Not sure if this is due to compression (accuracy -- sure hope 
  not!) or due to some mis-configuration of gribmap.txt, or something 
  else.  


+------------------+
| TEST DEFINITIONS |
+------------------+
ALL TESTS were run with the jan00 test case using default settings from 
test/em_real/namelist.input.jan01 unless otherwise indicated below.  

TESTan:  Read netCDF, write netCDF, 1 MPI task
TESTbn:  Read netCDF, write netCDF, 4 MPI tasks
TESTcn:  Read netCDF, write netCDF bitwise identical, 1 vs. 4 MPI tasks
TESTdn:  Write netCDF from real
TESTqn:  Read netCDF, write netCDF, 4 MPI tasks + 2 MPI quilt tasks
TESTrn:  TESTqn wrfout file vs. TESTan, bitwise identical
TESTa1:  Read netCDF, write grib1, 1 MPI task
TESTb1:  Read netCDF, write grib1, 4 MPI tasks
TESTc1:  Read netCDF, write grib1 bitwise identical, 1 vs. 4 MPI tasks
TESTd1:  Write grib1 from real
TESTe1:  Read grib1, write netCDF, 1 MPI task
TESTf1:  Read grib1, write netCDF, 4 MPI tasks
TESTg1:  Read grib1, write netCDF bitwise identical, 1 vs. 4 MPI tasks 
TESTh1:  TESTe1 wrfout file vs. TESTan, bitwise identical
TESTq1:  Read netCDF, write grib1, 4 MPI tasks + 2 MPI quilt tasks
TESTr1:  TESTq1 wrfout file vs. TESTa1, bitwise identical
TESTa2:  Read netCDF, write grib2, 1 MPI task
TESTb2:  Read netCDF, write grib2, 4 MPI tasks
TESTc2:  Read netCDF, write grib2 bitwise identical, 1 vs. 4 MPI tasks
TESTd2:  Write grib2 from real
TESTe2:  Read grib2, write netCDF, 1 MPI task
TESTf2:  Read grib2, write netCDF, 4 MPI tasks
TESTg2:  Read grib2, write netCDF bitwise identical, 1 vs. 4 MPI tasks
TESTh2:  TESTe2 wrfout file vs. TESTan, bitwise identical
TESTq2:  Read netCDF, write grib2, 4 MPI tasks + 2 MPI quilt tasks
TESTr2:  TESTq2 wrfout file vs. TESTa2, bitwise identical
TESTab:  Read netCDF, write binary, 1 MPI task
TESTbb:  Read netCDF, write binary, 4 MPI tasks
TESTcb:  Read netCDF, write binary bitwise identical, 1 vs. 4 MPI tasks
TESTdb:  Write binary from real
TESTeb:  Read binary, write netCDF, 1 MPI task
TESTfb:  Read binary, write netCDF, 4 MPI tasks
TESTgb:  Read binary, write netCDF bitwise identical, 1 vs. 4 MPI tasks
TESThb:  TESTeb wrfout file vs. TESTan, bitwise identical
TESTib:  Read binary, write binary, 4 MPI tasks
TESTjb:  TESTbb wrfout file vs. TESTib, bitwise identical
TESTqb:  Read netCDF, write binary, 4 MPI tasks + 2 MPI quilt tasks
TESTrb:  TESTqb wrfout file vs. TESTab, bitwise identical


+-------------------+
| TEST RESULT TABLE |
+-------------------+
TEST RESULT TABLE KEYS:  
Tested Configurations:
  v6j  bluevista, config=3, OBJECT_MODE=64,  built with    jasper
  v6   bluevista, config=3, OBJECT_MODE=64,  built without jasper
  s3j  bluesky,   config=3, OBJECT_MODE=32,  built with    jasper
  s3   bluesky,   config=3, OBJECT_MODE=32,  built without jasper
  s6j  bluesky,   config=3, OBJECT_MODE=64,  built with    jasper
  j    joshua,    config=5, no optimization, built without jasper
Test Results:
  'P'  PASS
  'P1' PASS, but see note "1"
  'F'  FAIL
  'X'  Skip test.  (For example, grib2 tests cannot be done without jasper).  
  ' '  To Be Done
+------------------------------------------+---+---+---+---+---+---+
| VERSION:   trunk_r1718_WORK       Config |v6j|v6 |s3j|s3 |s6j| j |
+------------------------------------------+---+---+---+---+---+---+
| TESTan:  RnetCDF WnetCDF 1 MPI           | P | P | P | P | P | P |
| TESTbn:  RnetCDF WnetCDF 4 MPI           | P | P | P | P | P | P |
| TESTcn:  RnetCDF WnetCDF 1 vs. 4 MPI     | P | P | P | P | P | P |
| TESTdn:  WnetCDF from real               | P | P | P | P | P | P |
| TESTqn:  RnetCDF WnetCDF 4 MPI + 2 quilt | P | P | P | P | P | P |
| TESTrn:  TESTan vs. TESTqn               | P | P | P | P | P | P |
| TESTa1:  RnetCDF Wgrib1 1 MPI            | P | P | P | P | P | P |
| TESTb1:  RnetCDF Wgrib1 4 MPI            | P | P | P | P | P | P |
| TESTc1:  RnetCDF Wgrib1 1 vs. 4 MPI      | P | P | P | P | P | P |
| TESTd1:  Wgrib1 from real                | P | P | P | P | P | P |
| TESTe1:  Rgrib1 WnetCDF 1 MPI            | P | P | P | P | P | P |
| TESTf1:  Rgrib1 WnetCDF 4 MPI            | P | P | P | P | P | P |
| TESTg1:  Rgrib1 WnetCDF 1 vs. 4 MPI      | P | P | P | P | P | P |
| TESTh1:  TESTe1 vs. all-netCDF           | P*| P*| P*| P*| P*|   |
| TESTq1:  RnetCDF Wgrib1 4 MPI + 2 quilt  | P | P | P | P | P | P |
| TESTr1:  TESTa1 vs. TESTq1               | P1| P1| P1| P1| P1| P1|
| TESTa2:  RnetCDF Wgrib2 1 MPI            | P | X | P | X | P | X |
| TESTb2:  RnetCDF Wgrib2 4 MPI            | P | X | P | X | P | X |
| TESTc2:  RnetCDF Wgrib2 1 vs. 4 MPI      | P | X | P | X | P | X |
| TESTd2:  Wgrib2 from real                | P | X | P | X | P | X |
| TESTe2:  Rgrib2 WnetCDF 1 MPI            | P | X | P | X | P | X |
| TESTf2:  Rgrib2 WnetCDF 4 MPI            | P | X | P | X | P | X |
| TESTg2:  Rgrib2 WnetCDF 1 vs. 4 MPI      | P | X | P | X | P | X |
| TESTh2:  TESTe2 vs. all-netCDF           |   | X |   | X |   | X |
| TESTq2:  RnetCDF Wgrib2 4 MPI + 2 quilt  | P | X | P | X | P | X |
| TESTr2:  TESTa2 vs. TESTq2               | P3| X | P3| X | P3| X |
| TESTab:  RnetCDF Wbinary 1 MPI           | P | P | P | P | P | P |
| TESTbb:  RnetCDF Wbinary 4 MPI           | P | P | P | P | P | P |
| TESTcb:  RnetCDF Wbinary 1 vs. 4 MPI     | P | P | P | P | P | P2|
| TESTdb:  Wbinary from real               | P | P | P | P | P | P |
| TESTeb:  Rbinary WnetCDF 1 MPI           | P | P | P | P | P | P |
| TESTfb:  Rbinary WnetCDF 4 MPI           | P | P | P | P | P | P |
| TESTgb:  Rbinary WnetCDF 1 vs. 4 MPI     | P | P | P | P | P | P |
| TESThb:  TESTeb vs. all-netCDF           | P | P | P | P | P | P |
| TESTib:  Rbinary Wbinary 4 MPI           | P | P | P | P | P | P |
| TESTjb:  TESTbb vs. TESTib               | P2| P2| P2| P2| P2| P2|
| TESTqb:  RnetCDF Wbinary 4 MPI + 2 quilt | P | P | P | P | P | P |
| TESTrb:  TESTab vs. TESTqb               | P2| P2| P2| P2| P2| P2|
+------------------------------------------+---+---+---+---+---+---+
| NOTES:                                                       |
|   * Jimy says this looks OK but someone should compare       |
|     plots...                                                 |
|   1 For TESTr1, some bytes differ but                        |
|     external/io_grib1/diffwrf says files match.              |
|   2 For TESTjb and TESTrb, some bytes differ but             |
|     external/io_int/diffwrf says files match.                |
|   3 For TESTr2, some bytes differ, need to test with grib2   |
|     version of diffwrf.                                      |
+--------------------------------------------------------------+