Makefile

   1 #       Top level Makefile for wrf system
   2
   3 LN      =       ln -s
   4 MAKE    =       make -i -r
   5 MV      =       /bin/mv
   6 RM      =       /bin/rm -f
   7 CHEM_FILES =    ../chem/module_aerosols_sorgam.o \
   8                 ../chem/module_gocart_aerosols.o \
   9                 ../chem/module_mosaic_driver.o \
  10                 ../chem/module_input_tracer.o \
  11                 ../chem/module_aerosols_soa_vbs.o
  12 CHEM_FILES2 =   ../chem/module_data_mosaic_asect.o
  13
  14 # these files are needed to compile 'phys' in wrfplus mode
  15 MODS4 = ../wrftladj/module_mp_mkessler.o ../wrftladj/module_mp_nconvp.o \
  16         ../wrftladj/module_bl_surface_drag.o ../wrftladj/module_cu_du.o
  17 MODMP = ../wrftladj/module_mp_mkessler.o ../wrftladj/module_mp_nconvp.o
  18 MODBL = ../wrftladj/module_bl_surface_drag.o
  19 MODCU = ../wrftladj/module_cu_du.o
  20
  21 # this file is needed to compile module_integrate.F and module_cpl.F under frame in wrfplus mode
  22 MODLL = ../wrftladj/module_linked_list2.o ../share/module_model_constants.o
  23
  24 # these 2 file are needed to compile mediation_integrate.F under share in wrfplus mode
  25 MODPT = ../dyn_em/module_bc_em.o ../wrftladj/mediation_pertmod_io.o
  26
  27 deflt :
  28                 @ echo Please compile the code using ./compile
  29
  30 include ./configure.wrf
  31
  32 EM_MODULE_DIR = -I../dyn_em
  33 EM_MODULES =  $(EM_MODULE_DIR)
  34
  35 DA_WRFVAR_MODULES = $(INCLUDE_MODULES)
  36 DA_WRFVAR_MODULES_2 = $(INC_MOD_WRFVAR)
  37
  38 DA_CONVERTOR_MOD_DIR = -I../var/convertor -p../var/convertor
  39 DA_CONVERTOR_MODULES = $(DA_CONVERTOR_MOD_DIR) $(INCLUDE_MODULES)
  40
  41
  42 #### 3.d.   add macros to specify the modules for this core
  43
  44 ALL_MODULES =                           \
  45                $(EM_MODULE_DIR)         \
  46                $(INCLUDE_MODULES)
  47
  48 configcheck:
  49         @echo " "
  50         @echo "============================================================================================== "
  51         @echo " "
  52         @echo "The following indicate the compilers selected to build the WRF system"
  53         @echo " "
  54         @echo "Serial Fortran compiler (mostly for tool generation):"
  55         @echo which SFC
  56         @which `echo $(SFC) | cut -d " " -f1`
  57         @echo " "
  58         @echo "Serial C compiler (mostly for tool generation):"
  59         @echo which SCC
  60         @which `echo $(SCC) | cut -d " " -f1`
  61         @echo " "
  62         @echo "Fortran compiler for the model source code:"
  63         @echo which FC
  64         @if command -v timex > /dev/null 2>&1; then \
  65           which `echo $(FC) | cut -d " " -f2` ; \
  66           echo "Will use 'timex' to report timing information" ; \
  67         elif command -v time > /dev/null 2>&1; then \
  68           which `echo $(FC) | cut -d " " -f2` ; \
  69           echo "Will use 'time' to report timing information" ; \
  70         else \
  71           which `echo $(FC) | cut -d " " -f1` ; \
  72         fi
  73         @echo " "
  74         @echo "C compiler for the model source code:"
  75         @echo which CC
  76         @which `echo $(CC) | cut -d " " -f1`
  77         @echo " "
  78         @echo "============================================================================================== "
  79         @echo " "
  80         @if [ "$(A2DCASE)" -a "$(DMPARALLEL)" ] ; then \
  81          echo "------------------------------------------------------------------------------" ; \
  82          echo "WRF CONFIGURATION ERROR                                                       " ; \
  83          echo "The $(A2DCASE) case requires a build for only single domain.                  " ; \
  84          echo "The $(A2DCASE) case cannot be used on distributed memory parallel systems.    " ; \
  85          echo "Only 3D WRF cases will run with the options that you selected.                " ; \
  86          echo "Please choose a different case, or rerun configure and choose a different set of options."  ; \
  87          echo "------------------------------------------------------------------------------" ; \
  88          exit 2 ; \
  89         fi
  90         @if [ "$(A1DCASE)" -a "$(DMPARALLEL)" ] ; then \
  91          echo "------------------------------------------------------------------------------" ; \
  92          echo "WRF CONFIGURATION ERROR                                                       " ; \
  93          echo "The $(A1DCASE) case requires a build for only single domain.                  " ; \
  94          echo "The $(A1DCASE) case cannot be used on distributed memory parallel systems.    " ; \
  95          echo "Only 3D WRF cases will run with the options that you selected.                " ; \
  96          echo "Please choose a different case, or rerun configure and choose a different set of options."  ; \
  97          echo "------------------------------------------------------------------------------" ; \
  98          exit 21 ; \
  99         fi
 100
 101
 102 framework_only : configcheck
 103         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" ext
 104         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir
 105         /bin/rm -f main/libwrflib.a main/libwrflib.lib
 106         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" framework
 107         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" shared
 108
 109 wrf : framework_only
 110         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" physics
 111         @if [ \( ! -f run/MPTABLE.TBL \) -o \
 112              \( ! -f phys/module_sf_noahmpdrv.F \) -o \
 113              \( ! -f phys/module_sf_noahmp_glacier.F \) -o \
 114              \( ! -f phys/module_sf_noahmp_groundwater.F \) -o \
 115              \( ! -f phys/module_sf_noahmplsm.F \) ] ; then \
 116            echo " " ; \
 117            echo "------------------------------------------------------------------------------" ; \
 118            echo "Error Error Error NoahMP submodule files not populating WRF directories" ; \
 119            echo "------------------------------------------------------------------------------" ; \
 120            echo " " ; \
 121            exit 31 ; \
 122         else \
 123            echo "------------------------------------------------------------------------------" ; \
 124            echo "NoahMP submodule files populating WRF directories" ; \
 125            echo "------------------------------------------------------------------------------" ; \
 126         fi
 127         if [ $(WRF_CHEM) -eq 1 ]    ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" chemics ; fi
 128         if [ $(WRF_EM_CORE) -eq 1 ]    ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" em_core ; fi
 129         if [ $(WRF_HYDRO) -eq 1 ]   ; then $(MAKE) MODULE_DIRS="$(ALL_MODULES)" wrf_hydro ; fi
 130         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrf )
 131         ( cd run ; /bin/rm -f wrf.exe ; ln -s ../main/wrf.exe . )
 132         if [ $(ESMF_COUPLING) -eq 1 ] ; then \
 133           ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrf_SST_ESMF ) ; \
 134         fi
 135         @echo "build started:   $(START_OF_COMPILE)"
 136         @echo "build completed:" `date`
 137
 138 wrfplus : configcheck
 139         @/bin/rm -f real.exe  > /dev/null 2>&1
 140         @/bin/rm -f tc.exe    > /dev/null 2>&1
 141         @/bin/rm -f ndown.exe > /dev/null 2>&1
 142         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 143         @ echo '--------------------------------------'
 144         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" ext
 145         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir
 146         /bin/rm -f main/libwrflib.a main/libwrflib.lib
 147         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" framework_plus
 148         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" shared
 149         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" physics_plus
 150         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" em_core
 151         $(MAKE) MODULE_DIRS="$(ALL_MODULES)" wrftlmadj
 152         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em em_wrfplus )
 153         ( cd run ; /bin/rm -f *.exe ; ln -s ../main/*.exe . )
 154         @echo "build started:   $(START_OF_COMPILE)"
 155         @echo "build completed:" `date`
 156
 157 all_wrfvar :
 158         $(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" ext
 159         $(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" toolsdir
 160         if [ $(CRTM) -ne 0 ] ; then \
 161           (cd var/external/crtm_2.3.0; $(MAKE) $(J)) ; \
 162         fi
 163         if [ $(BUFR) ] ; then \
 164           (cd var/external/bufr;  \
 165           $(MAKE) $(J) FC="$(SFC)" CC="$(SCC)" CPP="$(CPP)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" FFLAGS="$(FCOPTIM) $(FORMAT_FIXED) $(FCCOMPAT)" RANLIB="$(RANLIB)" AR="$(AR)" ARFLAGS="$(ARFLAGS)" ) ; \
 166         fi
 167 ### Use 'make' to avoid '-i -r' above:
 168         if [ $(WAVELET) ] ; then \
 169           ( cd var/external/wavelet; \
 170                 make CC="$(SC99) -DNOUNDERSCORE" RM="$(RM)" libWavelet.a; \
 171                 make FC="$(FC)" RM="$(RM)" lib_wavelet.a ) ; \
 172         fi
 173 #       ( cd var/build; touch depend.txt; make links; make depend; $(MAKE) $(J) all_wrfvar )
 174         ( cd var/build; make depend; $(MAKE) $(J) all_wrfvar )
 175         ( cd var/obsproc; $(MAKE) $(J) BUFR_CPP="$(BUFR_CPP)" )
 176         @echo "build started:   $(START_OF_COMPILE)"
 177         @echo "build completed:" `date`
 178
 179 gen_be :
 180         $(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" ext
 181         $(MAKE) MODULE_DIRS="$(DA_WRFVAR_MODULES)" toolsdir
 182         ( cd var/build; make depend; $(MAKE) $(J) gen_be )
 183         @echo "build started:   $(START_OF_COMPILE)"
 184         @echo "build completed:" `date`
 185
 186
 187 #  Eulerian mass coordinate initializations
 188
 189 em_fire : wrf
 190         @/bin/rm -f ideal.exe > /dev/null 2>&1
 191         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 192         @ echo '--------------------------------------'
 193         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=fire em_ideal )
 194         ( cd test/em_fire ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 195         ( cd test/em_fire ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 196         ( cd test/em_fire ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 197         ( cd test/em_fire ; /bin/sh create_links.sh )
 198         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 199         ( cd run ; if test -f namelist.input ; then \
 200                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 201                 /bin/rm -f namelist.input ; cp ../test/em_fire/namelist.input . )
 202         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_fire/input_sounding . )
 203         @echo " "
 204         @echo "=========================================================================="
 205         @echo "build started:   $(START_OF_COMPILE)"
 206         @echo "build completed:" `date`
 207         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 208                 echo " " ; \
 209                 echo "--->                  Executables successfully built                  <---" ; \
 210                 echo " " ; \
 211                 ls -l main/*.exe ; \
 212                 echo " " ; \
 213                 echo "==========================================================================" ; \
 214                 echo " " ; \
 215         else \
 216                 echo " " ; \
 217                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 218                 echo " " ; \
 219                 echo "==========================================================================" ; \
 220                 echo " " ; \
 221         fi
 222
 223 em_quarter_ss : wrf
 224         @/bin/rm -f ideal.exe > /dev/null 2>&1
 225         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 226         @ echo '--------------------------------------'
 227         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 228         ( cd test/em_quarter_ss ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 229         ( cd test/em_quarter_ss ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 230         ( cd test/em_quarter_ss ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 231         ( cd test/em_quarter_ss ; /bin/rm -f bulkdens.asc_s_0_03_0_9 ; ln -s ../../run/bulkdens.asc_s_0_03_0_9 . )
 232         ( cd test/em_quarter_ss ; /bin/rm -f bulkradii.asc_s_0_03_0_9 ; ln -s ../../run/bulkradii.asc_s_0_03_0_9 . )
 233         ( cd test/em_quarter_ss ; /bin/rm -f capacity.asc ; ln -s ../../run/capacity.asc . )
 234         ( cd test/em_quarter_ss ; /bin/rm -f coeff_p.asc ; ln -s ../../run/coeff_p.asc . )
 235         ( cd test/em_quarter_ss ; /bin/rm -f coeff_q.asc ; ln -s ../../run/coeff_q.asc . )
 236         ( cd test/em_quarter_ss ; /bin/rm -f constants.asc ; ln -s ../../run/constants.asc . )
 237         ( cd test/em_quarter_ss ; /bin/rm -f kernels.asc_s_0_03_0_9 ; ln -s ../../run/kernels.asc_s_0_03_0_9 . )
 238         ( cd test/em_quarter_ss ; /bin/rm -f kernels_z.asc ; ln -s ../../run/kernels_z.asc . )
 239         ( cd test/em_quarter_ss ; /bin/rm -f masses.asc ; ln -s ../../run/masses.asc . )
 240         ( cd test/em_quarter_ss ; /bin/rm -f termvels.asc ; ln -s ../../run/termvels.asc . )
 241         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 242         ( cd run ; if test -f namelist.input ; then \
 243                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 244                 /bin/rm -f namelist.input ; cp ../test/em_quarter_ss/namelist.input . )
 245         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_quarter_ss/input_sounding . )
 246         @echo " "
 247         @echo "=========================================================================="
 248         @echo "build started:   $(START_OF_COMPILE)"
 249         @echo "build completed:" `date`
 250         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 251                 echo " " ; \
 252                 echo "--->                  Executables successfully built                  <---" ; \
 253                 echo " " ; \
 254                 ls -l main/*.exe ; \
 255                 echo " " ; \
 256                 echo "==========================================================================" ; \
 257                 echo " " ; \
 258         else \
 259                 echo " " ; \
 260                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 261                 echo " " ; \
 262                 echo "==========================================================================" ; \
 263                 echo " " ; \
 264         fi
 265
 266 em_squall2d_x : wrf
 267         @/bin/rm -f ideal.exe > /dev/null 2>&1
 268         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 269         @ echo '--------------------------------------'
 270         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 271         ( cd test/em_squall2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 272         ( cd test/em_squall2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 273         ( cd test/em_squall2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 274         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 275         ( cd run ; if test -f namelist.input ; then \
 276                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 277                 /bin/rm -f namelist.input ; cp ../test/em_squall2d_x/namelist.input . )
 278         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_squall2d_x/input_sounding . )
 279         @echo "build started:   $(START_OF_COMPILE)"
 280         @echo "build completed:" `date`
 281         @echo " "
 282         @echo "=========================================================================="
 283         @echo "build started:   $(START_OF_COMPILE)"
 284         @echo "build completed:" `date`
 285         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 286                 echo " " ; \
 287                 echo "--->                  Executables successfully built                  <---" ; \
 288                 echo " " ; \
 289                 ls -l main/*.exe ; \
 290                 echo " " ; \
 291                 echo "==========================================================================" ; \
 292                 echo " " ; \
 293         else \
 294                 echo " " ; \
 295                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 296                 echo " " ; \
 297                 echo "==========================================================================" ; \
 298                 echo " " ; \
 299         fi
 300
 301 em_squall2d_y : wrf
 302         @/bin/rm -f ideal.exe > /dev/null 2>&1
 303         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 304         @ echo '--------------------------------------'
 305         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 306         ( cd test/em_squall2d_y ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 307         ( cd test/em_squall2d_y ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 308         ( cd test/em_squall2d_y ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 309         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 310         ( cd run ; if test -f namelist.input ; then \
 311                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 312                 /bin/rm -f namelist.input ; cp ../test/em_squall2d_y/namelist.input . )
 313         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_squall2d_y/input_sounding . )
 314         @echo " "
 315         @echo "=========================================================================="
 316         @echo "build started:   $(START_OF_COMPILE)"
 317         @echo "build completed:" `date`
 318         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 319                 echo " " ; \
 320                 echo "--->                  Executables successfully built                  <---" ; \
 321                 echo " " ; \
 322                 ls -l main/*.exe ; \
 323                 echo " " ; \
 324                 echo "==========================================================================" ; \
 325                 echo " " ; \
 326         else \
 327                 echo " " ; \
 328                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 329                 echo " " ; \
 330                 echo "==========================================================================" ; \
 331                 echo " " ; \
 332         fi
 333
 334 em_b_wave : wrf
 335         @/bin/rm -f ideal.exe > /dev/null 2>&1
 336         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 337         @ echo '--------------------------------------'
 338         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 339         ( cd test/em_b_wave ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 340         ( cd test/em_b_wave ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 341         ( cd test/em_b_wave ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 342         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 343         ( cd run ; if test -f namelist.input ; then \
 344                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 345                 /bin/rm -f namelist.input ; cp ../test/em_b_wave/namelist.input . )
 346         ( cd run ; /bin/rm -f input_jet ; ln -s ../test/em_b_wave/input_jet . )
 347         @echo " "
 348         @echo "=========================================================================="
 349         @echo "build started:   $(START_OF_COMPILE)"
 350         @echo "build completed:" `date`
 351         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 352                 echo " " ; \
 353                 echo "--->                  Executables successfully built                  <---" ; \
 354                 echo " " ; \
 355                 ls -l main/*.exe ; \
 356                 echo " " ; \
 357                 echo "==========================================================================" ; \
 358                 echo " " ; \
 359         else \
 360                 echo " " ; \
 361                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 362                 echo " " ; \
 363                 echo "==========================================================================" ; \
 364                 echo " " ; \
 365         fi
 366
 367 em_les : wrf
 368         @/bin/rm -f ideal.exe > /dev/null 2>&1
 369         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 370         @ echo '--------------------------------------'
 371         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 372         ( cd test/em_les ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 373         ( cd test/em_les ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 374         ( cd test/em_les ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 375         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 376         ( cd run ; if test -f namelist.input ; then \
 377                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 378                 /bin/rm -f namelist.input ; cp ../test/em_les/namelist.input . )
 379         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_les/input_sounding . )
 380         @echo " "
 381         @echo "=========================================================================="
 382         @echo "build started:   $(START_OF_COMPILE)"
 383         @echo "build completed:" `date`
 384         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 385                 echo " " ; \
 386                 echo "--->                  Executables successfully built                  <---" ; \
 387                 echo " " ; \
 388                 ls -l main/*.exe ; \
 389                 echo " " ; \
 390                 echo "==========================================================================" ; \
 391                 echo " " ; \
 392         else \
 393                 echo " " ; \
 394                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 395                 echo " " ; \
 396                 echo "==========================================================================" ; \
 397                 echo " " ; \
 398         fi
 399
 400 em_seabreeze2d_x : wrf
 401         @/bin/rm -f ideal.exe > /dev/null 2>&1
 402         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 403         @ echo '--------------------------------------'
 404         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 405         ( cd test/em_seabreeze2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 406         ( cd test/em_seabreeze2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 407         ( cd test/em_seabreeze2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
 408                 ln -sf ../../run/LANDUSE.TBL . ; \
 409                 ln -sf ../../run/RRTM_DATA . )
 410         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 411         ( cd run ; if test -f namelist.input ; then \
 412                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 413                 /bin/rm -f namelist.input ; cp ../test/em_seabreeze2d_x/namelist.input . )
 414         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_seabreeze2d_x/input_sounding . )
 415         @echo " "
 416         @echo "=========================================================================="
 417         @echo "build started:   $(START_OF_COMPILE)"
 418         @echo "build completed:" `date`
 419         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 420                 echo " " ; \
 421                 echo "--->                  Executables successfully built                  <---" ; \
 422                 echo " " ; \
 423                 ls -l main/*.exe ; \
 424                 echo " " ; \
 425                 echo "==========================================================================" ; \
 426                 echo " " ; \
 427         else \
 428                 echo " " ; \
 429                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 430                 echo " " ; \
 431                 echo "==========================================================================" ; \
 432                 echo " " ; \
 433         fi
 434
 435 em_convrad : wrf
 436         @ echo '--------------------------------------'
 437         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 438         ( cd test/em_convrad ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 439         ( cd test/em_convrad ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 440         ( cd test/em_convrad ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
 441                 ln -sf ../../run/LANDUSE.TBL . ; \
 442                 ln -sf ../../run/RRTMG_LW_DATA . ; \
 443                 ln -sf ../../run/RRTMG_SW_DATA . ; \
 444                 ln -sf ../../run/ozone.formatted . ; \
 445                 ln -sf ../../run/ozone_lat.formatted . ; \
 446                 ln -sf ../../run/ozone_plev.formatted . )
 447         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 448         ( cd run ; if test -f namelist.input ; then \
 449                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 450                 /bin/rm -f namelist.input ; cp ../test/em_convrad/namelist.input . )
 451         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_convrad/input_sounding . )
 452         @echo "build started:   $(START_OF_COMPILE)"
 453         @echo "build completed:" `date`
 454
 455 em_tropical_cyclone : wrf
 456         @/bin/rm -f ideal.exe > /dev/null 2>&1
 457         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 458         @ echo '--------------------------------------'
 459         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=tropical_cyclone em_ideal )
 460         ( cd test/em_tropical_cyclone ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 461         ( cd test/em_tropical_cyclone ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 462         ( cd test/em_tropical_cyclone ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
 463                 ln -sf ../../run/LANDUSE.TBL . )
 464         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 465         ( cd run ; if test -f namelist.input ; then \
 466                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 467                 /bin/rm -f namelist.input ; cp ../test/em_tropical_cyclone/namelist.input . )
 468         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_tropical_cyclone/input_sounding . )
 469         @echo " "
 470         @echo "=========================================================================="
 471         @echo "build started:   $(START_OF_COMPILE)"
 472         @echo "build completed:" `date`
 473         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 474                 echo " " ; \
 475                 echo "--->                  Executables successfully built                  <---" ; \
 476                 echo " " ; \
 477                 ls -l main/*.exe ; \
 478                 echo " " ; \
 479                 echo "==========================================================================" ; \
 480                 echo " " ; \
 481         else \
 482                 echo " " ; \
 483                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 484                 echo " " ; \
 485                 echo "==========================================================================" ; \
 486                 echo " " ; \
 487         fi
 488
 489 em_scm_xy : wrf
 490         @/bin/rm -f ideal.exe > /dev/null 2>&1
 491         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 492         @ echo '--------------------------------------'
 493         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=scm_xy em_ideal )
 494         ( cd test/em_scm_xy ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 495         ( cd test/em_scm_xy ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 496         ( cd test/em_scm_xy ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ; \
 497                 ln -sf ../../run/GENPARM.TBL . ; \
 498                 ln -sf ../../run/LANDUSE.TBL . ; \
 499                 ln -sf ../../run/SOILPARM.TBL . ; \
 500                 ln -sf ../../run/VEGPARM.TBL . ; \
 501                 ln -sf ../../run/RRTM_DATA . )
 502         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 503         ( cd run ; if test -f namelist.input ; then \
 504                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 505                 /bin/rm -f namelist.input ; cp ../test/em_scm_xy/namelist.input . )
 506         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_scm_xy/input_sounding . )
 507         @echo " "
 508         @echo "=========================================================================="
 509         @echo "build started:   $(START_OF_COMPILE)"
 510         @echo "build completed:" `date`
 511         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 512                 echo " " ; \
 513                 echo "--->                  Executables successfully built                  <---" ; \
 514                 echo " " ; \
 515                 ls -l main/*.exe ; \
 516                 echo " " ; \
 517                 echo "==========================================================================" ; \
 518                 echo " " ; \
 519         else \
 520                 echo " " ; \
 521                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 522                 echo " " ; \
 523                 echo "==========================================================================" ; \
 524                 echo " " ; \
 525         fi
 526
 527 convert_em : framework_only
 528         if [ $(WRF_CONVERT) -eq 1 ] ; then \
 529             ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" convert_em ) ; \
 530         fi
 531
 532 # Link wrf.exe and wrf_SST_ESMF.exe into
 533 # test/em_esmf_exp when ESMF_COUPLING is set.  wrf.exe
 534 # can be used for stand-alone testing in this case.
 535 # wrf_SST_ESMF.exe is a coupled application.  Note that make
 536 # target $(SOLVER)_wrf_SST_ESMF builds wrf_SST_ESMF.exe.
 537 em_real : wrf
 538         @/bin/rm -f real.exe  > /dev/null 2>&1
 539         @/bin/rm -f tc.exe    > /dev/null 2>&1
 540         @/bin/rm -f ndown.exe > /dev/null 2>&1
 541         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 542         @ echo '--------------------------------------'
 543         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real em_real )
 544         ( cd test/em_real ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 545         if [ $(ESMF_COUPLING) -eq 1 ] ; then \
 546           ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real em_wrf_SST_ESMF ) ; \
 547           ( cd test/em_esmf_exp ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . ) ; \
 548           ( cd test/em_esmf_exp ; /bin/rm -f wrf_SST_ESMF.exe ; ln -s ../../main/wrf_SST_ESMF.exe . ) ; \
 549           ( cd test/em_esmf_exp ; /bin/rm -f real.exe ; ln -s ../../main/real.exe . ) ; \
 550           ( cd test/em_esmf_exp ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . ) ; \
 551           ( cd test/em_esmf_exp ; /bin/rm -f ETAMPNEW_DATA.expanded_rain ETAMPNEW_DATA RRTM_DATA RRTMG_LW_DATA RRTMG_SW_DATA ; \
 552                ln -sf ../../run/ETAMPNEW_DATA . ;                      \
 553                ln -sf ../../run/ETAMPNEW_DATA.expanded_rain . ;        \
 554                ln -sf ../../run/RRTM_DATA . ;                          \
 555                ln -sf ../../run/RRTMG_LW_DATA . ;                      \
 556                ln -sf ../../run/RRTMG_SW_DATA . ;                      \
 557                ln -sf ../../run/CAM_ABS_DATA . ;                       \
 558                ln -sf ../../run/CAM_AEROPT_DATA . ;                    \
 559                ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP4.5 . ;   \
 560                ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP6   . ;   \
 561                ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP8.5 . ;   \
 562                ln -sf ../../run/CAMtr_volume_mixing_ratio.A1B    . ;   \
 563                ln -sf ../../run/CAMtr_volume_mixing_ratio.A2     . ;   \
 564                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP119 . ;   \
 565                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP126 . ;   \
 566                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 . ;   \
 567                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 CAMtr_volume_mixing_ratio ;   \
 568                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP370 . ;   \
 569                ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP585 . ;   \
 570                ln -sf ../../run/CLM_ALB_ICE_DFS_DATA . ;               \
 571                ln -sf ../../run/CLM_ALB_ICE_DRC_DATA . ;               \
 572                ln -sf ../../run/CLM_ASM_ICE_DFS_DATA . ;               \
 573                ln -sf ../../run/CLM_ASM_ICE_DRC_DATA . ;               \
 574                ln -sf ../../run/CLM_DRDSDT0_DATA . ;                   \
 575                ln -sf ../../run/CLM_EXT_ICE_DFS_DATA . ;               \
 576                ln -sf ../../run/CLM_EXT_ICE_DRC_DATA . ;               \
 577                ln -sf ../../run/CLM_KAPPA_DATA . ;                     \
 578                ln -sf ../../run/CLM_TAU_DATA . ;                       \
 579                ln -sf ../../run/ozone.formatted . ;                    \
 580                ln -sf ../../run/ozone_lat.formatted . ;                \
 581                ln -sf ../../run/ozone_plev.formatted . ;               \
 582                ln -sf ../../run/aerosol.formatted . ;                  \
 583                ln -sf ../../run/aerosol_lat.formatted . ;              \
 584                ln -sf ../../run/aerosol_lon.formatted . ;              \
 585                ln -sf ../../run/aerosol_plev.formatted . ;             \
 586                ln -sf ../../run/eclipse_besselian_elements.dat . ;     \
 587                ln -sf ../../run/CCN_ACTIVATE.BIN . ;                   \
 588                ln -sf ../../run/p3_lookupTable_1.dat-v5.4_2momI . ;    \
 589                ln -sf ../../run/p3_lookupTable_1.dat-v5.4_3momI . ;    \
 590                ln -sf ../../run/p3_lookupTable_2.dat-v5.3 . ;          \
 591                ln -sf ../../run/HLC.TBL . ;                            \
 592                ln -sf ../../run/wind-turbine-1.tbl . ;                 \
 593                ln -sf ../../run/ishmael-gamma-tab.bin . ;              \
 594                ln -sf ../../run/ishmael-qi-qc.bin . ;                  \
 595                ln -sf ../../run/ishmael-qi-qr.bin . ;                  \
 596                ln -sf ../../run/BROADBAND_CLOUD_GODDARD.bin . ;        \
 597                ln -sf ../../run/STOCHPERT.TBL . ;                      \
 598                if [ $(RWORDSIZE) -eq 8 ] ; then                        \
 599                   ln -sf ../../run/ETAMPNEW_DATA_DBL ETAMPNEW_DATA ;   \
 600                   ln -sf ../../run/ETAMPNEW_DATA.expanded_rain_DBL ETAMPNEW_DATA.expanded_rain ;   \
 601                   ln -sf ../../run/RRTM_DATA_DBL RRTM_DATA         ;   \
 602                   ln -sf ../../run/RRTMG_LW_DATA_DBL RRTMG_LW_DATA ;   \
 603                   ln -sf ../../run/RRTMG_SW_DATA_DBL RRTMG_SW_DATA ;   \
 604                fi ) ; \
 605           ( cd test/em_esmf_exp ; /bin/rm -f GENPARM.TBL ; ln -s ../../run/GENPARM.TBL . ) ; \
 606           ( cd test/em_esmf_exp ; /bin/rm -f LANDUSE.TBL ; ln -s ../../run/LANDUSE.TBL . ) ; \
 607           ( cd test/em_esmf_exp ; /bin/rm -f SOILPARM.TBL ; ln -s ../../run/SOILPARM.TBL . ) ; \
 608           ( cd test/em_esmf_exp ; /bin/rm -f URBPARM.TBL ; ln -s ../../run/URBPARM.TBL . ) ; \
 609           ( cd test/em_esmf_exp ; /bin/rm -f URBPARM_LCZ.TBL ; ln -s ../../run/URBPARM_LCZ.TBL . ) ; \
 610           ( cd test/em_esmf_exp ; /bin/rm -f VEGPARM.TBL ; ln -s ../../run/VEGPARM.TBL . ) ; \
 611           ( cd test/em_esmf_exp ; /bin/rm -f MPTABLE.TBL ; ln -s ../../run/MPTABLE.TBL . ) ; \
 612           ( cd test/em_esmf_exp ; /bin/rm -f tr49t67 ; ln -s ../../run/tr49t67 . ) ; \
 613           ( cd test/em_esmf_exp ; /bin/rm -f tr49t85 ; ln -s ../../run/tr49t85 . ) ; \
 614           ( cd test/em_esmf_exp ; /bin/rm -f tr67t85 ; ln -s ../../run/tr67t85 . ) ; \
 615           ( cd test/em_esmf_exp ; /bin/rm -f gribmap.txt ; ln -s ../../run/gribmap.txt . ) ; \
 616           ( cd test/em_esmf_exp ; /bin/rm -f grib2map.tbl ; ln -s ../../run/grib2map.tbl . ) ; \
 617         fi
 618         ( cd test/em_real ; /bin/rm -f real.exe ; ln -s ../../main/real.exe . )
 619         ( cd test/em_real ; /bin/rm -f tc.exe ; ln -s ../../main/tc.exe . )
 620         ( cd test/em_real ; /bin/rm -f ndown.exe ; ln -s ../../main/ndown.exe . )
 621         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 622         ( cd test/em_real ; /bin/rm -f README.physics_files ; ln -s ../../run/README.physics_files . )
 623         ( cd test/em_real ; /bin/rm -f ETAMPNEW_DATA.expanded_rain ETAMPNEW_DATA RRTM_DATA RRTMG_LW_DATA RRTMG_SW_DATA ;    \
 624              ln -sf ../../run/ETAMPNEW_DATA . ;                     \
 625              ln -sf ../../run/ETAMPNEW_DATA.expanded_rain . ;       \
 626              ln -sf ../../run/RRTM_DATA . ;                         \
 627              ln -sf ../../run/RRTMG_LW_DATA . ;                     \
 628              ln -sf ../../run/RRTMG_SW_DATA . ;                     \
 629              ln -sf ../../run/CAM_ABS_DATA . ;                      \
 630              ln -sf ../../run/CAM_AEROPT_DATA . ;                   \
 631              ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP4.5 . ;  \
 632              ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP6   . ;  \
 633              ln -sf ../../run/CAMtr_volume_mixing_ratio.RCP8.5 . ;  \
 634              ln -sf ../../run/CAMtr_volume_mixing_ratio.A1B    . ;  \
 635              ln -sf ../../run/CAMtr_volume_mixing_ratio.A2     . ;  \
 636              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP119 . ;  \
 637              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP126 . ;  \
 638              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 . ;  \
 639              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP245 CAMtr_volume_mixing_ratio ;   \
 640              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP370 . ;  \
 641              ln -sf ../../run/CAMtr_volume_mixing_ratio.SSP585 . ;  \
 642              ln -sf ../../run/CLM_ALB_ICE_DFS_DATA . ;              \
 643              ln -sf ../../run/CLM_ALB_ICE_DRC_DATA . ;              \
 644              ln -sf ../../run/CLM_ASM_ICE_DFS_DATA . ;              \
 645              ln -sf ../../run/CLM_ASM_ICE_DRC_DATA . ;              \
 646              ln -sf ../../run/CLM_DRDSDT0_DATA . ;                  \
 647              ln -sf ../../run/CLM_EXT_ICE_DFS_DATA . ;              \
 648              ln -sf ../../run/CLM_EXT_ICE_DRC_DATA . ;              \
 649              ln -sf ../../run/CLM_KAPPA_DATA . ;                    \
 650              ln -sf ../../run/CLM_TAU_DATA . ;                      \
 651              ln -sf ../../run/ozone.formatted . ;                   \
 652              ln -sf ../../run/ozone_lat.formatted . ;               \
 653              ln -sf ../../run/ozone_plev.formatted . ;              \
 654              ln -sf ../../run/aerosol.formatted . ;                 \
 655              ln -sf ../../run/aerosol_lat.formatted . ;             \
 656              ln -sf ../../run/aerosol_lon.formatted . ;             \
 657              ln -sf ../../run/aerosol_plev.formatted . ;            \
 658              ln -sf ../../run/eclipse_besselian_elements.dat . ;    \
 659              ln -sf ../../run/capacity.asc . ;                      \
 660              ln -sf ../../run/coeff_p.asc . ;                       \
 661              ln -sf ../../run/coeff_q.asc . ;                       \
 662              ln -sf ../../run/constants.asc . ;                     \
 663              ln -sf ../../run/masses.asc . ;                        \
 664              ln -sf ../../run/termvels.asc . ;                      \
 665              ln -sf ../../run/kernels.asc_s_0_03_0_9 . ;            \
 666              ln -sf ../../run/kernels_z.asc . ;                     \
 667              ln -sf ../../run/bulkdens.asc_s_0_03_0_9 . ;           \
 668              ln -sf ../../run/bulkradii.asc_s_0_03_0_9 . ;          \
 669              ln -sf ../../run/CCN_ACTIVATE.BIN . ;                  \
 670              ln -sf ../../run/p3_lookupTable_1.dat-v5.4_2momI . ;   \
 671              ln -sf ../../run/p3_lookupTable_1.dat-v5.4_3momI . ;   \
 672              ln -sf ../../run/p3_lookupTable_2.dat-v5.3 . ;         \
 673              ln -sf ../../run/HLC.TBL . ;                           \
 674              ln -sf ../../run/wind-turbine-1.tbl . ;                \
 675              ln -sf ../../run/ishmael-gamma-tab.bin . ;             \
 676              ln -sf ../../run/ishmael-qi-qc.bin . ;                 \
 677              ln -sf ../../run/ishmael-qi-qr.bin . ;                 \
 678              ln -sf ../../run/BROADBAND_CLOUD_GODDARD.bin . ;       \
 679              ln -sf ../../run/STOCHPERT.TBL . ;                     \
 680              if [ $(RWORDSIZE) -eq 8 ] ; then                       \
 681                 ln -sf ../../run/ETAMPNEW_DATA_DBL ETAMPNEW_DATA ;  \
 682                 ln -sf ../../run/ETAMPNEW_DATA.expanded_rain_DBL ETAMPNEW_DATA.expanded_rain ;   \
 683                 ln -sf ../../run/RRTM_DATA_DBL RRTM_DATA ;          \
 684                 ln -sf ../../run/RRTMG_LW_DATA_DBL RRTMG_LW_DATA ;  \
 685                 ln -sf ../../run/RRTMG_SW_DATA_DBL RRTMG_SW_DATA ;  \
 686              fi )
 687         ( cd test/em_real ; if test -d ../../run/SBM_input_33 ; then                            \
 688              ln -sf ../../run/SBM_input_33 . ;                                          \
 689              ln -sf ../../run/scattering_tables_2layer_high_quad_1dT_1%fw_110 . ;       \
 690              fi )
 691         ( cd test/em_real ; /bin/rm -f GENPARM.TBL ; ln -s ../../run/GENPARM.TBL . )
 692         ( cd test/em_real ; /bin/rm -f LANDUSE.TBL ; ln -s ../../run/LANDUSE.TBL . )
 693         ( cd test/em_real ; /bin/rm -f SOILPARM.TBL ; ln -s ../../run/SOILPARM.TBL . )
 694         ( cd test/em_real ; /bin/rm -f URBPARM.TBL ; ln -s ../../run/URBPARM.TBL . )
 695         ( cd test/em_real ; /bin/rm -f URBPARM_LCZ.TBL ; ln -s ../../run/URBPARM_LCZ.TBL . )
 696         ( cd test/em_real ; /bin/rm -f VEGPARM.TBL ; ln -s ../../run/VEGPARM.TBL . )
 697         ( cd test/em_real ; /bin/rm -f MPTABLE.TBL ; ln -s ../../run/MPTABLE.TBL . )
 698         ( cd test/em_real ; /bin/rm -f tr49t67 ; ln -s ../../run/tr49t67 . )
 699         ( cd test/em_real ; /bin/rm -f tr49t85 ; ln -s ../../run/tr49t85 . )
 700         ( cd test/em_real ; /bin/rm -f tr67t85 ; ln -s ../../run/tr67t85 . )
 701         ( cd test/em_real ; /bin/rm -f gribmap.txt ; ln -s ../../run/gribmap.txt . )
 702         ( cd test/em_real ; /bin/rm -f grib2map.tbl ; ln -s ../../run/grib2map.tbl . )
 703         ( cd run ; /bin/rm -f real.exe ; ln -s ../main/real.exe . )
 704         ( cd run ; /bin/rm -f tc.exe ; ln -s ../main/tc.exe . )
 705         ( cd run ; /bin/rm -f ndown.exe ; ln -s ../main/ndown.exe . )
 706         ( cd run ; if test -f namelist.input ; then \
 707                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 708                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 709         @echo " "
 710         @echo "=========================================================================="
 711         @echo "build started:   $(START_OF_COMPILE)"
 712         @echo "build completed:" `date`
 713         @if test -e main/wrf.exe -a -e main/real.exe -a -e main/ndown.exe -a -e main/tc.exe  ; then \
 714                 echo " " ; \
 715                 echo "--->                  Executables successfully built                  <---" ; \
 716                 echo " " ; \
 717                 ls -l main/*.exe ; \
 718                 echo " " ; \
 719                 echo "==========================================================================" ; \
 720                 echo " " ; \
 721         else \
 722                 echo " " ; \
 723                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 724                 echo " " ; \
 725                 echo "==========================================================================" ; \
 726                 echo " " ; \
 727         fi
 728
 729
 730 em_hill2d_x : wrf
 731         @/bin/rm -f ideal.exe > /dev/null 2>&1
 732         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 733         @ echo '--------------------------------------'
 734         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 735         ( cd test/em_hill2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 736         ( cd test/em_hill2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 737         ( cd test/em_hill2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 738         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 739         ( cd run ; if test -f namelist.input ; then \
 740                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 741                 /bin/rm -f namelist.input ; cp ../test/em_hill2d_x/namelist.input . )
 742         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_hill2d_x/input_sounding . )
 743         @echo " "
 744         @echo "=========================================================================="
 745         @echo "build started:   $(START_OF_COMPILE)"
 746         @echo "build completed:" `date`
 747         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 748                 echo " " ; \
 749                 echo "--->                  Executables successfully built                  <---" ; \
 750                 echo " " ; \
 751                 ls -l main/*.exe ; \
 752                 echo " " ; \
 753                 echo "==========================================================================" ; \
 754                 echo " " ; \
 755         else \
 756                 echo " " ; \
 757                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 758                 echo " " ; \
 759                 echo "==========================================================================" ; \
 760                 echo " " ; \
 761         fi
 762
 763 em_grav2d_x : wrf
 764         @/bin/rm -f ideal.exe > /dev/null 2>&1
 765         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 766         @ echo '--------------------------------------'
 767         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=ideal em_ideal )
 768         ( cd test/em_grav2d_x ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 769         ( cd test/em_grav2d_x ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 770         ( cd test/em_grav2d_x ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 771         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 772         ( cd run ; if test -f namelist.input ; then \
 773                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 774                 /bin/rm -f namelist.input ; cp ../test/em_grav2d_x/namelist.input . )
 775         ( cd run ; /bin/rm -f input_sounding ; ln -s ../test/em_grav2d_x/input_sounding . )
 776         @echo " "
 777         @echo "=========================================================================="
 778         @echo "build started:   $(START_OF_COMPILE)"
 779         @echo "build completed:" `date`
 780         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 781                 echo " " ; \
 782                 echo "--->                  Executables successfully built                  <---" ; \
 783                 echo " " ; \
 784                 ls -l main/*.exe ; \
 785                 echo " " ; \
 786                 echo "==========================================================================" ; \
 787                 echo " " ; \
 788         else \
 789                 echo " " ; \
 790                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 791                 echo " " ; \
 792                 echo "==========================================================================" ; \
 793                 echo " " ; \
 794         fi
 795
 796 em_heldsuarez : wrf
 797         @/bin/rm -f ideal.exe > /dev/null 2>&1
 798         @/bin/rm -f wrf.exe   > /dev/null 2>&1
 799         @ echo '--------------------------------------'
 800         ( cd main ; $(MAKE) RLFLAGS="$(RLFLAGS)" MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=heldsuarez em_ideal )
 801         ( cd test/em_heldsuarez ; /bin/rm -f wrf.exe ; ln -s ../../main/wrf.exe . )
 802         ( cd test/em_heldsuarez ; /bin/rm -f ideal.exe ; ln -s ../../main/ideal.exe . )
 803         ( cd test/em_heldsuarez ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 804         ( cd run ; /bin/rm -f ideal.exe ; ln -s ../main/ideal.exe . )
 805         ( cd run ; if test -f namelist.input ; then \
 806                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 807                 /bin/rm -f namelist.input ; cp ../test/em_heldsuarez/namelist.input . )
 808         @echo " "
 809         @echo "=========================================================================="
 810         @echo "build started:   $(START_OF_COMPILE)"
 811         @echo "build completed:" `date`
 812         @if test -e main/wrf.exe -a -e main/ideal.exe ; then \
 813                 echo " " ; \
 814                 echo "--->                  Executables successfully built                  <---" ; \
 815                 echo " " ; \
 816                 ls -l main/*.exe ; \
 817                 echo " " ; \
 818                 echo "==========================================================================" ; \
 819                 echo " " ; \
 820         else \
 821                 echo " " ; \
 822                 echo "---> Problems building executables, look for errors in the build log  <---" ; \
 823                 echo " " ; \
 824                 echo "==========================================================================" ; \
 825                 echo " " ; \
 826         fi
 827
 828 #### anthropogenic emissions converter
 829
 830 emi_conv : wrf
 831         @ echo '--------------------------------------'
 832         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_emiss )
 833         ( cd test/em_real ; /bin/rm -f convert_emiss.exe ; ln -s ../../chem/convert_emiss.exe . )
 834         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 835         ( cd run ; if test -f namelist.input ; then \
 836                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 837                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 838
 839 #### emissions opt 3 converter
 840
 841 opt3_conv : wrf
 842         @ echo '--------------------------------------'
 843         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_fireemiss )
 844         ( cd test/em_real ; /bin/rm -f convert_fireemiss.exe ; ln -s ../../chem/convert_fireemiss.exe . )
 845         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 846         ( cd run ; if test -f namelist.input ; then \
 847                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 848                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 849
 850 #### biogenic emissions converter
 851
 852 bio_conv : wrf
 853         @ echo '--------------------------------------'
 854         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_bioemiss )
 855         ( cd test/em_real ; /bin/rm -f convert_bioemiss.exe ; ln -s ../../chem/convert_bioemiss.exe . )
 856         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 857         ( cd run ; if test -f namelist.input ; then \
 858                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 859                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 860
 861 bioemiss_conv_megan2 : wrf
 862         @ echo '--------------------------------------'
 863         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_bioemiss_megan2 )
 864         ( cd test/em_real ; /bin/rm -f convert_bioemiss_megan2.exe ; ln -s ../../chem/convert_bioemiss_megan2.exe . )
 865         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 866         ( cd run ; if test -f namelist.input ; then \
 867                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 868                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 869
 870 #### DMS emissions converter
 871
 872 dms_conv : wrf
 873         @ echo '--------------------------------------'
 874         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_dms )
 875         ( cd test/em_real ; /bin/rm -f convert_dms.exe ; ln -s ../../chem/convert_dms.exe . )
 876         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 877         ( cd run ; if test -f namelist.input ; then \
 878                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 879                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 880
 881
 882 #### Dust errosion factor emissions converter
 883
 884 dust_conv : wrf
 885         @ echo '--------------------------------------'
 886         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_dust )
 887         ( cd test/em_real ; /bin/rm -f convert_dust.exe ; ln -s ../../chem/convert_dust.exe . )
 888         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 889         ( cd run ; if test -f namelist.input ; then \
 890                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 891                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 892
 893 #### GOCART background state for oh, no3 and h2o2 converter
 894
 895 gocart_conv : wrf
 896         @ echo '--------------------------------------'
 897         ( cd chem ; $(MAKE) MODULE_DIRS="$(ALL_MODULES)" SOLVER=em IDEAL_CASE=real convert_gocart )
 898         ( cd test/em_real ; /bin/rm -f convert_gocart.exe ; ln -s ../../chem/convert_gocart.exe . )
 899         ( cd test/em_real ; /bin/rm -f README.namelist ; ln -s ../../run/README.namelist . )
 900         ( cd run ; if test -f namelist.input ; then \
 901                 /bin/cp -f namelist.input namelist.input.backup.`date +%Y-%m-%d_%H_%M_%S` ; fi ; \
 902                 /bin/rm -f namelist.input ; cp ../test/em_real/namelist.input . )
 903
 904
 905 io :
 906         @ echo '--------------------------------------'
 907         ( cd tools ; $(MAKE) standard.exe )
 908         (            $(MAKE) io_only )
 909         (            $(MAKE) MODULE_DIRS="$(ALL_MODULES)" toolsdir )
 910         ( cd frame ; $(MAKE) module_driver_constants.o pack_utils.o module_machine.o module_internal_header_util.o wrf_debug.o )
 911         ( cd frame ; $(AR) $(ARFLAGS) ../main/libwrflib.a module_driver_constants.o pack_utils.o module_machine.o  \
 912                                         module_internal_header_util.o module_wrf_error.o wrf_debug.o )
 913
 914 ext :
 915         @ echo '--------------------------------------'
 916         if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
 917           ( cd frame ; $(MAKE) externals ) ; \
 918         else \
 919           ( cd frame ; $(MAKE) PLUSFLAG="-DWRFPLUS=1" externals ) ; \
 920         fi
 921
 922 framework :
 923         @ echo '--------------------------------------'
 924         ( cd frame ; $(MAKE) $(J) LLIST="$(LINKLIST)" framework ; \
 925           cd ../external/io_netcdf ; \
 926           $(MAKE) NETCDFPATH="$(NETCDFPATH)"  NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 927                FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 928                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 929                LIB_LOCAL="$(LIB_LOCAL)" \
 930                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
 931           cd ../io_netcdf ; \
 932           $(MAKE) NETCDFPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 933                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 934                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 935                LIB_LOCAL="$(LIB_LOCAL)" \
 936                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
 937           cd ../io_netcdfpar ; \
 938           $(NETCDFPAR_BUILD) $(MAKE) NETCDFPARPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 939                FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 940                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 941                LIB_LOCAL="$(LIB_LOCAL)" \
 942                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
 943           cd ../io_netcdfpar ; \
 944           $(NETCDFPAR_BUILD) $(MAKE) NETCDFPARPATH="$(NETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 945                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 946                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 947                LIB_LOCAL="$(LIB_LOCAL)" \
 948                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
 949           cd ../io_pio ; \
 950           echo SKIPPING PIO BUILD $(MAKE) NETCDFPATH="$(PNETCDFPATH)" NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 951                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 952                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 953                LIB_LOCAL="$(LIB_LOCAL)" \
 954                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
 955           cd ../io_int ; \
 956           $(MAKE) SFC="$(SFC) $(FCBASEOPTS)" \
 957                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" \
 958                RANLIB="$(RANLIB)" CPP="$(CPP) $(ARCH_LOCAL)" DM_FC="$(DM_FC) $(FCBASEOPTS)"\
 959                TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 960                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf ; \
 961           cd ../../frame )
 962
 963 framework_plus :
 964         @ echo '--------------------------------------'
 965         ( cd frame ; $(MAKE) $(J) LLIST="$(MODLL)" framework ; \
 966           cd ../external/io_netcdf ; \
 967           $(MAKE) NETCDFPATH="$(NETCDFPATH)"  NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 968                FC="$(FC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 969                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 970                LIB_LOCAL="$(LIB_LOCAL)" \
 971                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf; \
 972           cd ../io_netcdf ; \
 973           $(MAKE) NETCDFPATH="$(NETCDFPATH)"  NETCDF4_DEP_LIB="$(NETCDF4_DEP_LIB)" \
 974                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 975                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 976                LIB_LOCAL="$(LIB_LOCAL)" \
 977                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
 978           cd ../io_pio ; \
 979           echo SKIPPING PIO BUILD $(MAKE) NETCDFPATH="$(PNETCDFPATH)" \
 980                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" RANLIB="$(RANLIB)" \
 981                CPP="$(CPP)" LDFLAGS="$(LDFLAGS)" TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 982                LIB_LOCAL="$(LIB_LOCAL)" \
 983                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR"; \
 984           cd ../io_int ; \
 985           $(MAKE) SFC="$(SFC) $(FCBASEOPTS)" \
 986                FC="$(SFC) $(FCBASEOPTS) $(PROMOTION) $(FCDEBUG) $(OMP)" \
 987                RANLIB="$(RANLIB)" CPP="$(CPP) $(ARCH_LOCAL)" DM_FC="$(DM_FC) $(FCBASEOPTS)"\
 988                TRADFLAG="$(TRADFLAG)" ESMF_IO_LIB_EXT="$(ESMF_IO_LIB_EXT)" \
 989                ESMF_MOD_DEPENDENCE="$(ESMF_MOD_DEPENDENCE)" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf ; \
 990           cd ../../frame )
 991
 992 shared :
 993         @ echo '--------------------------------------'
 994         if [ "`echo $(J) | sed -e 's/-j//g' -e 's/ \+//g'`" -gt "6" ] ; then \
 995           if [ $(WRF_PLUS_CORE) -eq 0 ]   ; then \
 996            ( cd share ; $(MAKE) -j 6 PERTMOD=" " ) ;  \
 997           else \
 998            ( cd share ; $(MAKE) -j 6 PERTMOD="$(MODPT)" ) ;  \
 999           fi \
1000         else \
1001           if [ $(WRF_PLUS_CORE) -eq 0 ]   ; then \
1002            ( cd share ; $(MAKE) $(J) PERTMOD=" " ) ;  \
1003           else \
1004            ( cd share ; $(MAKE) $(J) PERTMOD="$(MODPT)" ) ;  \
1005           fi \
1006         fi
1007
1008 wrf_hydro :
1009         @ echo '----------wrf_hydro-----------------------'
1010         if [ $(WRF_HYDRO) -eq 1 ]   ; then (cd hydro/CPL/WRF_cpl; make -f Makefile.cpl) ; fi
1011
1012 chemics :
1013         @ echo '--------------------------------------'
1014         if [ $(WRF_KPP) -eq 1 ] ; then ( cd chem ; $(MAKE) ) ; fi
1015         if [ $(WRF_KPP) -eq 0 ] ; then \
1016           if  [ "`echo $(J) | sed -e 's/-j//g' -e 's/ \+//g'`" -gt "16" ] ; then \
1017             ( cd chem ; $(MAKE) -j 16 ) ;  \
1018           else \
1019             ( cd chem ; $(MAKE) $(J) ) ; \
1020           fi \
1021         fi
1022 #       ( cd chem ; $(MAKE) )
1023 #       ( cd chem ; $(MAKE) $(J) )
1024
1025 physics :
1026         @ echo '--------------------------------------'
1027         if [ $(WRF_CHEM) -eq 0 ] ; then \
1028                 ( cd phys ; $(MAKE) submodules ; $(MAKE) CF2=" " ) ; \
1029                 if [ -n "$(WRF_CMAQ)" ] && [ $(WRF_CMAQ) -eq 1 ] ; then \
1030                         @ echo '----------- make cmaq ----------------' ; \
1031                         ( rm -f main/libcmaqlib.a; cd cmaq ; $(MAKE) -f Makefile.twoway ) ; \
1032                 fi \
1033         else \
1034                 ( cd phys ; $(MAKE) submodules ; $(MAKE) CF2="$(CHEM_FILES2)" ) ; \
1035         fi
1036
1037 physics_plus :
1038         if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
1039            ( cd phys ; $(MAKE) submodules ; $(MAKE) PHYS_PLUS=" " PHYS_MP=" " PHYS_BL=" " PHYS_CU=" " ) ; \
1040         else \
1041            ( cd phys ; $(MAKE) submodules ; $(MAKE) PHYS_PLUS="$(MODS4)" PHYS_MP="$(MODMP)" PHYS_BL="$(MODBL)" PHYS_CU="$(MODCU)" ) ; \
1042         fi
1043
1044 wrftlmadj :
1045         @ echo '--------------------------------------'
1046         ( cd wrftladj ; $(MAKE) $(J) wrftladj )
1047
1048 em_core :
1049         @ echo '--------------------------------------'
1050         if [ $(WRF_CHEM) -eq 0 ] ; then \
1051                 CF= ; \
1052         else \
1053                 CF="$(CHEM_FILES)" ; \
1054         fi
1055         ( cd dyn_em ; $(MAKE) $(J) CF="$(CF)" )
1056
1057 # rule used by configure to test if this will compile with MPI 2 calls MPI_Comm_f2c and _c2f
1058 mpi2_test :
1059         @ cd tools ; /bin/rm -f mpi2_test ; $(CC) -c mpi2_test.c ; cd ..
1060
1061 # rule used by configure to test if this will compile with MPI 2 calls MPI_Init_thread
1062 mpi2_thread_test :
1063         @ cd tools ; /bin/rm -f mpi2_thread_test ; $(CC) -c mpi2_thread_test.c ; cd ..
1064
1065 # rule used by configure to test if fseeko and fseeko64 are supported (for share/landread.c to work right)
1066 fseek_test :
1067         @ cd tools ; /bin/rm -f fseeko_test ; $(SCC) -DTEST_FSEEKO -o fseeko_test fseek_test.c ; cd ..
1068         @ cd tools ; /bin/rm -f fseeko64_test ; $(SCC) -DTEST_FSEEKO64 -o fseeko64_test fseek_test.c ; cd ..
1069
1070 # rule used by configure to test if this will compile with netcdf4
1071 nc4_test:
1072         if [ -z "$(USENETCDFPAR)" ] || [ $(USENETCDFPAR) -eq 0 ] ; then \
1073          ( cd tools ; /bin/rm -f nc4_test.{exe,nc,o} ; $(SCC) -o nc4_test.exe nc4_test.c -I$(NETCDF_C)/include $(NETCDF4_DEP_LIB) ; cd .. ) ; \
1074         else \
1075          ( cd tools ; /bin/rm -f nc4_test.{exe,nc,o} ; $(DM_CC) -o nc4_test.exe nc4_test.c -I$(NETCDF_C)/include $(NETCDF4_DEP_LIB) ; cd ..  ) ; \
1076         fi
1077
1078 # rule used by configure to test if Fortran 2003 IEEE signaling is available
1079 fortran_2003_ieee_test:
1080         @cd tools ; /bin/rm -f fortran_2003_ieee_test.{exe,o} ; $(SFC) -o fortran_2003_ieee_test.exe fortran_2003_ieee_test.F ; cd ..
1081
1082 # rule used by configure to test if Fortran 2003 ISO_C support is available
1083 fortran_2003_iso_c_test:
1084         @cd tools ; /bin/rm -f fortran_2003_iso_c_test.{exe,o} ; $(SFC) -o fortran_2003_iso_c_test.exe fortran_2003_iso_c_test.F ; cd ..
1085
1086 # rule used by configure to test if Fortran 2003 FLUSH intrinsic subroutine support is available
1087 fortran_2003_flush_test:
1088         @cd tools ; /bin/rm -f fortran_2003_flush_test.{exe,o} ; $(SFC) -o fortran_2003_flush_test.exe fortran_2003_flush_test.F ; cd ..
1089
1090 # rule used by configure to test if Fortran 2003 FLUSH intrinsic subroutine is replaced by FFLUSH (thanks xlf)
1091 fortran_2003_fflush_test:
1092         @cd tools ; /bin/rm -f fortran_2003_fflush_test.{exe,o} ; $(SFC) -o fortran_2003_fflush_test.exe fortran_2003_fflush_test.F ; cd ..
1093
1094 # rule used by configure to test if Fortran 2008 gamma intrinsic function is available
1095 fortran_2008_gamma_test:
1096         @cd tools ; /bin/rm -f fortran_2008_gamma_test.{exe,o} ; $(SFC) -o fortran_2008_gamma_test.exe fortran_2008_gamma_test.F ; cd ..
1097
1098 # rule used by configure to test for RPC support
1099 rpc_test:
1100         @cd tools ; /bin/rm -f rpc_test.exe ; $(SCC) -DUSE_TIRPC -o rpc_test.exe rpc_test.c ; $(SCC) -o rpc_test.exe rpc_test.c; cd ..
1101
1102 toolsdir :
1103         @ echo '--------------------------------------'
1104         if [ $(WRF_PLUS_CORE) -eq 0 ] ; then \
1105           ( cd tools ; $(MAKE) CC_TOOLS_CFLAGS="$(CC_TOOLS_CFLAGS)" CC_TOOLS="$(CC_TOOLS) -DIWORDSIZE=$(IWORDSIZE) -DMAX_HISTORY=$(MAX_HISTORY)" ) ; \
1106         else \
1107           ( cd tools ; $(MAKE) CC_TOOLS_CFLAGS="$(CC_TOOLS_CFLAGS)" CC_TOOLS="$(CC_TOOLS) -DIWORDSIZE=$(IWORDSIZE) -DMAX_HISTORY=$(MAX_HISTORY) -DWRFPLUS=1" ) ; \
1108         fi
1109
1110
1111 #       ( cd tools ; $(MAKE) CC_TOOLS="$(CC_TOOLS) -DIO_MASK_SIZE=$(IO_MASK_SIZE)" )
1112
1113 # Use this target to build stand-alone tests of esmf_time_f90.
1114 # Only touches external/esmf_time_f90/.
1115 esmf_time_f90_only :
1116         @ echo '--------------------------------------'
1117         ( cd external/esmf_time_f90 ; $(MAKE) FC="$(FC) $(FCFLAGS)" CPP="$(CPP) -DTIME_F90_ONLY" tests )
1118
1119 clean :
1120                 @ echo 'Use the clean script'
1121
1122 # DO NOT DELETE